Veranda in a village house lined with clapboard. Finishing the veranda in the country. covered porch glazing

The content of the article:

Finishing the veranda is a set of measures aimed at its improvement. A veranda is called an extension adjacent to the wall of the house. It belongs to the type of summer unheated premises and can be in a closed or open version. Depending on the type of extension, the interior decoration of its walls is carried out. In addition, the configuration of the veranda and its exterior design should fit well into the exterior of the entire building. With simple skills construction works, you can finish the walls of the veranda with your own hands.

The choice of material for finishing the walls of the veranda

The materials chosen for finishing the walls of the veranda must meet practical and aesthetic requirements. A feature of their choice is the lack of heating in the annex closed type and serious impact climatic conditions on the design of the open veranda. Therefore, the material used for decor should not only be visually attractive and consistent with the design, but also withstand exposure to the sun, high humidity and temperature fluctuations.

Sheathing the walls of the veranda can be done with many finishing materials that are used for interior and exterior work:

. It belongs to the classics of the genre, as it is the most popular material for wall cladding due to its environmental cleanliness, excellent appearance and pleasant aroma exhaled by natural wood.
Plasterboard sheets (GKL). For verandas, their moisture-resistant version is suitable. Such products differ from conventional plasterboards in their in green. The material is environmentally friendly, easy to install and easy to process in numerous ways. It can take almost any shape, and this is important when decorating walls. Such cladding is used in closed verandas.
. This material imitates natural wood. It's pretty solid, but humid environment not for him. Therefore, MDF can be used for wall cladding covered veranda.
PVC panels. It is a durable and inexpensive moisture resistant material. It is represented by a rich assortment of various shades and colors, can have a different texture, is very easy to use and not particularly whimsical to care for. Suitable for wall cladding of extensions of any type.
Siding panels. They are practical and affordable. They often imitate wood and come in a variety of colors. The material does not rot, is resistant to temperature changes and fire, is easy to clean and durable. Most often used for exterior finish walls on the veranda.

Preparatory work before finishing the walls on the veranda

If the veranda has glazing, it is better to finish its walls after installing thermal insulation under the windows. In this case, the room can be used almost until the onset of frost.

To insulate a closed veranda, you can use mineral wool or polystyrene foam. To begin with, waterproofing should be fixed on the walls, as it can be taken waterproof polyethylene film. It is overlapped by 150-200 mm, the joints of the sheets must be glued with metallized tape.

After that, it is necessary to install a crate on the walls. The material for it can be wooden beam pre-treated with an antiseptic. The cross section of the timber should be selected according to the thickness of the insulation, and the size of the cell of the crate should correspond to the width of the insulation.

Then the insulation, in particular mineral wool, should be packed in a waterproof material and laid in the cells of the crate. Wrapping the insulation will protect it from moisture and keep it functional for many years.

After that, a foil membrane should be fixed on top of the insulation on the crate and its joints should be glued with adhesive tape. In the process of insulation, it plays the role of a heat-reflecting screen. On this, the thermal insulation of the walls can be completed.

Technology for finishing the walls of the veranda

Having chosen how to sheathe the walls on the veranda, you can start finishing them. Below we will consider several of its options.

Finishing the walls of the veranda with PVC panels

This finishing method is inexpensive, but it can ordinary room make it cozy and interesting. The panels are not afraid of high humidity and sudden changes in its temperature - they are not able to cause deformations of this material. Panel installation is easy and hassle-free.

The disadvantage of the material can be called its fragility, although at the present time it is possible to purchase "armored" panels, the cost of which will be twice as much as usual. Therefore, after installing such a cladding, you should carefully move chairs towards it or lean against the wall. To minimize the risks, there is such a construction trick: the first plank of the panel lathing is mounted at the level of the knees, the second - the pelvis, and the third - the shoulder.

Frame for plastic panels made from wooden slats or a profile that is used when installing GKL. Reiki can have a section of 30x10 or 30x20 mm, before use they should be treated with an antiseptic.

The fastening of the laths of the crate should be carried out in a perpendicular direction relative to the installation of the panels. For example, if the plastic on the wall needs to be placed vertically, then the rails for its fastening should be stuffed horizontally on the wall, the step between them should not exceed 50 cm.

After making the crate in the corner of the room, you need to fix the mounting corner or the starting profile with screws or nails. The corner will allow you to dock the panels with each other. The starting profile is installed if the adjacent wall will be sheathed with other material. On the ceiling, you need to install a mounting plate for the plinth.

The first panel is inserted into the guide profile with a spike towards the mounting side. Then it needs to be fixed on the crate using a self-tapping screw with a press washer. Then the spike of the next PVC panel must be firmly inserted into the groove of the previous one and fixed. All other trim panels are mounted in the same way.

Due to the fact that plastic has thermal expansion, a gap of 20-30 mm should be left at the bottom and top of the wall to compensate for it, masking it with a plinth.

Important! Panels with a pattern when sheathing walls are installed from left to right. Plain panels can be mounted starting from either side.

Finishing the walls of the veranda with MDF panels

This material is quite popular among adherents self-finishing. MDF panels are stronger than plastic, but not resistant to moisture. Therefore, they should only be used on closed verandas.

The installation process of MDF panels is similar to the previous one. Only in this case, their fastening is carried out using special metal devices - clamps, which are fixed on the material with small nails or a construction stapler. This must be done through the guide, it will prevent damage to the edge of the panel.

Finishing the walls of the veranda clapboard

Clapboard is called wooden board thickness up to 22 mm, having special grooves, with the help of which the installation and joining of the cladding elements is carried out. If the material is treated with an antiseptic, its service life can be extended up to 20 years.

According to the production method, the sheathing board can be solid or spliced. In the latter case, pieces of high-quality wood are interconnected in a special way. Such products do not have flaws in the form of knots or cracks, but are not suitable for sheathing the walls of an open veranda.

The reason for this is education high humidity cracks in the joints of the board, which spoil appearance finished cladding. The most expensive lining is almost always spliced. It has an “extra” class, and products of classes A, B and C are made from solid wood.

Before finishing the walls on the veranda with a sheathing board, the material must be left to adapt in a closed room for several days, and then the lining should be processed protective composition. Mounting the board on the walls of the veranda is similar to installing PVC and MDF panels.

There are several ways to attach it:

The simplest of them is fasteners using galvanized nails. In this case, they are driven in along the center of the planks, and the caps are sunk into the wood with a punch.
Fixing the sheathing board with self-tapping screws is more laborious, but at the same time, the attachment points are not visible. A hole is drilled in the board from the side of its spike, having a depth of about 10 mm. The diameters of the drill and the caps of the fasteners must match each other. Then the bar is screwed to the lath of the crate, and the screw is recessed into the hole and closed with a dowel on top. The place of fastening is then polished.
The board can be attached to the crate using mounting brackets. For this, a pneumatic or mechanical construction stapler is used.
Another way is to fasten wooden sheathing with kleimers. At the same time, it is first attached to the rear wall of the mounting groove of the first bar. Then it is nailed to the wall and only then the kleimer is fixed. The same kleimer is installed on the second board, its spike is inserted into the groove of the previous plank and the kleimer is fixed on the crate rail. With the help of such fasteners, only internal wall cladding is performed.

After completing the installation of wooden wall cladding, you need to close all the corners and joints near the doors and windows with a corner and proceed with the finishing of the coating. To give its surface a certain shade, you can use colored varnishes and stains for wood.

Before painting the walls on the veranda, it is recommended to apply the selected varnish to a sample of the material and allow it to dry. It happens that after drying, the shade of the coating changes, and it is quite difficult to remove a layer of varnish that does not correspond to the plan. Therefore, it would be better to buy a small container with a paint composition for testing, and if it suits, purchase the rest.

If there is a need to leave the planking wood in its original form, a colorless glaze containing an ultraviolet filter can be applied to it. It will help prevent fading of the walls of the veranda from exposure to the sun.

Exterior decoration of the walls of the veranda

It can be done with lining or siding. wood cladding in this respect is somewhat capricious. Despite the treatment of its elements with various antiseptics, when exposed to precipitation, sunlight and seasonal temperature changes, the skin may lose its original appearance if it is not taken care of.

Therefore, every year it will be necessary to carry out various measures to preserve it: impregnation, staining, etc. But if the choice to use wood has already been made, it is important to remember that horizontal mount boards outer skin should be performed upwards with a spike, fixing them in 2 rows on each side of the lock connection.

The exterior decoration of the walls of the veranda with siding is more good option. This cladding got its name in the 19th century. Planed and painted boards were fastened at an angle to the plane of the wall so that each subsequent horizontal element slightly hung over the previous one. This position of the boards allowed the water to roll down the cladding without delay. Nowadays, siding performs two functions - protective and aesthetic.

Most often used for exterior wall cladding vinyl siding. Its popularity is due to ease of installation, practicality and affordable price. Externally, the material looks like plain board, which is used in the cladding of the facade.

However, vinyl will not lose its appearance even after a couple of decades, despite seasonal temperature fluctuations, bitter frosts and heavy rains. In addition, dirt does not stick to this material and maintenance is minimal - only wash off the dust from the lining with a garden hose. Due to the huge number of shades, siding can be matched to any exterior of the house, it will perfectly fit into the overall ensemble everywhere.

Installation of vinyl siding panels is carried out in the following order:

First you need to make and install a crate for facing the walls of the veranda. This will require unedged board 30 mm thick or a wooden beam with a cross section of 40x50 mm. It must be fixed in a vertical position with a step of 400-500 mm over the entire surface of the walls. Additional wooden blocks should be installed around the windows, at the corners of the veranda, along the upper and lower edges of the future sheathing.
From the bottom along the perimeter of the walls in strictly horizontal position it is necessary to fix the starting profile to the crate using self-tapping screws.
After that, you need to install corner profiles around the openings, as well as in all corners of the building. The lower edge of the corner profile should be 5-6 mm below the level of the starting bar.
Then you should cut the panels. Vinyl is easily cut with scissors, hacksaw or electric jigsaw. Due to the fact that vinyl panels have thermal expansion, each of them must be made shorter than the wall by 5-7 mm.
After that, the prepared panel must be slightly bent in the center, and its edges should be brought into the grooves of the profiles located at the corners of the wall. Then the panel should be aligned and its lower edge should be brought into the starting profile. The upper edge must be fixed with screws to the crate through special holes.
Tight pressing of the screw heads to the panel material is unacceptable. The oval shape of the mounting holes is specially designed for free movement of the material relative to the screw part of the fastener with changes in air temperature. There should be a distance of 1.5 mm between the screw head and the crate.
The next panel must also be inserted into the corner profiles, snapped into the groove of the previous element and fixed to the wall sheathing.
Before installing the last panel, it must be leveled on the crate finish profile. The panel is then cut to the required width and snapped into the previous skin by simply inserting the free edge of the product into the finishing profile. This is where the wall cladding of the veranda with siding ends.

How to sheathe the walls of the veranda - look at the video:

No one a private house or a cottage can not do without a veranda - a place where they meet home comfort and peace of nature. What finish to choose, how to arrange furniture and fit the design into the surrounding space?

The veranda is probably the best place at the cottage or country house where you can fully relax and feel the unity with nature. It can be solid, insulated, functionally planned and thoroughly furnished. Or be light, furnished with country simplicity - such that with the onset of cold weather it could be freed from furniture. However, any veranda needs a certain interior decoration, which will create that unique atmosphere of closeness to nature.

The most important thing is that the veranda is in harmony with the architecture of the house, its interior decoration echoes the interior. It is also important that it is correctly inscribed in the surrounding landscape.

Veranda style

It all depends on the style in which the decoration of the house itself is sustained. But at the same time, the atmosphere of the veranda should convey its purpose - a place for relaxation and meals. Therefore, they are perfect rustic styles, for example, country, Provence, Russian style, in which comfort is intertwined with the simplicity and charm of rural life. If you want something special, you can choose Japanese or eco-style. Or build a patio in the spirit of the Roman Empire with fountains, flowerpots and terracotta tiles on the floor.

materials

In the interior, only natural materials. The walls can be finished with stone or brick, making a reference to the loft style. The tree will also look organic. For finishing floors, it is better to use wear-resistant, unpretentious material - for example, porcelain stoneware. Panoramic glazing traditional for most verandas: passes through it sunlight and see the greenery of the garden. If you equip the veranda with sliding glass doors, you can let the garden and its freshness inside at any time, or isolate yourself from dampness when it rains.

It is also better to choose a natural palette for finishing the veranda. In this border zone between the house and the garden, natural green, gray-brown, terracotta shades with bright accents.

layout

It is important to plan the space inside the veranda in accordance with your expectations and the functions that the veranda will perform in the house. If you rarely use it for cooking, but more as a place where you can sit and drink tea in the shade, you will need a simple dining group (table and light chairs) and a small grill to sometimes cook barbecue for the household.

If you are a connoisseur of country feasts with many friends, then it is better to make a competent layout on the veranda. Designate a dining area and a cooking area, organize an entire kitchen: build a stove that includes an oven, hob, hearth with a spit, grill and tandoor, as well as put a cutting table, hang cupboards for dishes. Then there is no need for a hotel kitchen inside the house.

Furniture

An open veranda should be furnished with a special garden furniture. She's made from resistant materials, which are not afraid of moisture, cold, do not deteriorate in direct sunlight. Be sure to need a table and several chairs for the household. Dishes and food can be safely stored at home, so cabinets are most likely not needed. But flower pots or planter, rocking chair or hanging chair, a sofa swing will be very handy on the open veranda.

Much more furniture will be needed if you are working on finishing the glazed veranda, which plays the role of a kitchen-dining room at home. Here, for the interior, you can already choose solid expensive furniture: soft sofas and armchairs round table to accommodate more guests. Undoubted decoration will be wooden dish shelves - the best place for beautiful plates. Let's not forget the old grandmother's buffet.

Decor

Finishing the veranda is completed with a choice of decor and accessories. Since this area combines the functions of a relaxation area and a kitchen-dining room, the decor should be appropriate, cozy. The mood of warmth will be created by family photos on the walls, paintings with landscapes and still lifes, painted dishes and intricate candlesticks.

More examples interior arrangements verandas can be found in the photo with design projects from professionals.

Surrounding area

A private house or a private estate constitutes a single whole with the territory adjacent to the house. The veranda should look organically in the surrounding landscape, and the garden approaching it should be a continuation of the chosen style. In short, if preference is given English style, then the garden should be English. And the eastern veranda will fit into Japanese garden stones. By the way, the veranda can be combined with another functional area:

conservatory, greenhouse or even greenhouse
a playground so that the little ones do not get bored while the adults feast
bath or sauna to combine the pleasure of eating barbecue with the adoption of water procedures.

Sheathing with siding is found today at every step. The sheathing of the log house is done with siding, as well as any other structure. In this article, we will consider the technology of siding sheathing.

It applies to almost any building. The very principle of doing the work is important here, you just need to observe certain rules and technology. Also, the video in this article will show the entire progress of the work and you will not miss anything.

What attracts siding and vice versa

If you are interested budget finish walls of the veranda, then in this case it is best to turn your attention to this particular type of panel, since their price will suit almost everyone.

Their main positive points are:

Simple enough to operate and maintain.
Easy to install, because everything can be done entirely by hand. And it doesn't take much skill. You just need to know the basic principles of facing and the lessons on our website will help you with this.
Resistant to temperature extremes, as well as to high humidity.
Material consumption can be minimized, because here you just need to calculate everything correctly.
The ability of the material to veneer different planes is also attractive. It can be made at an angle, sheathed with siding, there is also not only horizontal, but also vertical fastening.
Siding sheathing can be done with the simultaneous installation of insulation. The price of the structure in this option will increase purely by the cost of the insulation.

Such plastic panels, of course, have some disadvantages, which include:

Low environmental friendliness. Only environmentally friendly materials are used in production.
high brittleness.

Attention: This material should not be installed in winter time. It is quite simply in this case damaged mechanically.

siding technology

Let's take specific example, this is a sheathing of the veranda with siding. Although, in principle, you can take any other room. After all, the installation instructions will be almost the same. Let's take a closer look at the entire installation process of this material.

Lathing installation

Construction begins with installation, because then the entire preparation process, in principle, is decided by the crate. You do not particularly care about the difference in the plane of the wall. Everything is aligned, the main thing at the first stage is to make the correct and high-quality markup.

So:

First of all, we need to draw the starting strip along the plane. To do this, put a mark at the desired height.
After that, we transfer it. For this, a water level is used. It will help him to do it quite accurately.
After that, we connect the marks. To do this, we use a simple nylon thread and beat off the attachment line.
Now, along the drawn line, we nail the starting bar. For this you can apply metal corner or wooden beam. We use dowels for fastening. First, we make a hole with a puncher and then we make the connection. The fastening must be extremely rigid. After all, the weight of the structure is large.
If you decide to take wooden slats, then before installation you need to treat them with an antiseptic that will protect the wood from all kinds of insects and decay.

Attention: For walls facing the street, it is best to use just such rails, because the metal profile will play the role of a cold bridge, which will have a negative impact on the overall level of thermal insulation. Metallic profile, in turn, is well suited for uneven walls.

Now we attach the cross rails. To do this, we need to determine the installation plane. We stretch the fishing line along the diagonals of the strapping and, according to the level, we fasten the slats.

The installation height is adjustable with shims. You can also use wood.

Rails on the wall must be mounted perpendicular to the direction of installation of the panels. The step between the slats is approximately fifty centimeters.

We carry out warming

Construction and finishing must be done with high quality. And one of the important factors is. With siding, this can be done quite simply.

Moreover, the cost of finishing with your own hands will be only the cost of the material. Especially if you have a heated veranda, then this must be done.

After installing the crate, it is necessary to immediately cover the plane with a waterproofing film. It is attached to the crate. For this, a construction stapler is used.

After that, we need to fix the mats. Their connection is done with the help of construction parachutes. They must be purchased in advance. It is necessary to make at least six attachment points per meter.

Attention: When laying it is necessary to ensure that the insulation is not deformed. Otherwise, it will lose its properties.

Panel mounting

There are several mounting methods. It will not consider everything, but we will note the most convenient and affordable - with the help of self-tapping screws. by the most the best choice will be the use of horizontal siding, which has castle type connections.

After fixing the crate along the perimeter, we fasten the siding panels:

The starting rail is installed in the lower corner.

For these purposes, we use self-tapping screws.

We lower the panel into such a rail in such a way that the mounting shelf is directed towards the installation.

PVC is fixed with screws or a special device.

Attention: If self-tapping screws are used, then in no case should they be tightened to the end, you must leave a free space of one millimeter. If this is not done, then the panels will definitely warp.

After that, we sequentially install the finishing panels one after another so that there are no gaps between them. But at the bottom and at the top of the wall it is best to provide a gap of three centimeters. This will protect yourself from skewed lining due to thermal expansion. The resulting space can be covered with a plinth.

Warning: It is worth taking into account that vinyl siding is susceptible to thermal expansion, which is why all panels that are mounted must be 5 millimeters shorter than the wall.

Panels must be installed in series, while leading the lower edge into the grooves start profile or the previous plank.
The panels are fixed with self-tapping screws, but they should not be twisted to the end. Do not forget that the material undergoes expansion under the influence of temperature. There should be a distance of one millimeter between the coating plane and the screw head.
In the same way, one by one, the remaining planks are attached until you move to the top of the building. There, you first need to install the finishing bar, and only after that we mount the extreme bar.

Now you know how to sheathe a veranda with siding and you can do the job without any problems. Sheathing siding durable construction which will last quite a long time.

A veranda is usually called an extension adjacent to one of the walls of the house. This building belongs to the category of summer, unheated premises.
By their design, verandas can be either open, that is, under a roof, but not glazed, or closed. It is quite natural that the decoration inside the veranda is made depending on this fact.
And yet, the configuration of the extension and its exterior finish should harmoniously fit into the exterior of the house.

The veranda plays not only a decorative function, but is also necessary from a purely practical point of view. A well-lit room, without cabinet furniture, decorated with many indoor plants, is the best suited for enjoy your holiday V summer time.

So:

The veranda can be combined with the main entrance to the house. In some cases, the entrance to the veranda can be carried out from any room, that is, it does not have access to the street.
Such a veranda is shown in the photo above. But such an extension should be provided in the process of building a house.
If there was no veranda in the project, then it can be attached to the house later. But, in order not to have to punch a doorway in the bearing wall, this is done on the main facade, in front of front door.
You won’t have to carry out any engineering communications there, so you can build a veranda with your own hands.
Naturally, the extension should correspond as much as possible to the design of the house. The main thing is to correctly complete the foundation for the veranda.
It is better to do this in the summer, otherwise, after thawing, the ground may subside, and your veranda will simply move away from the wall of the house. Think carefully about what it will be built from and how it is finished on the outside so as not to spoil the appearance of the building.
Usually, a columnar foundation is made under the veranda. This is quite enough to withstand the weight of the frame and its skin.
brick pillars foundations are laid out in pits up to one meter deep, under each corner post. If the veranda is more than one and a half meters long, intermediate pillars are also made.

In the pits dug under the foundation, they first arrange sand cushions, approximately twenty centimeters high. Small gravel is poured over the sand, and it is poured with a liquid solution.
In order for the water from the solution not to go into the sand, it is better to lay a roofing material with a bend of 10 cm along the walls of the pit on it, before filling the rubble.
The resulting concrete pad will be the support for brick column. Concrete must be coated before being laid out. liquid glass or bitumen.
Suitable for any other waterproofing compound. The height of the pillars must be calculated so that the floor mark of the veranda is 20-25 cm lower than in the house.
After the masonry is completed, the internal cavity column foundation filled with gravel, stone, broken brick- any improvised material. The outer surface of the pillars is also coated with a waterproofing compound.
The foundation pillars will be supported wooden beams(lags). Beams before laying must be treated with an antiseptic solution.
This will not only protect them from saturation with moisture and decay, but also protect them from damage by insects and rodents.

This is just one of the options for building a foundation for a veranda. It may have a different design, depending on the size of the veranda under construction and its walls, if any.
In each case, you need instructions, and best of all, a project.

Veranda wall decoration

If the house to which the veranda is attached is log, made of timber (see House made of timber: what facade decoration can do) or frame-panel, then the most organic option would be to make the extension walls made of wood. Although, you can make a frame from a metal profile, and then simply sheathe it with clapboard.
Especially if the veranda is planned to be glazed.

So:

Then for this purpose you can use aluminum stained-glass windows installed directly on the plinth of the veranda. Their use solves two problems at once: the erection of walls and their decoration, or rather, its absence.
Washed glass - that's the whole finish. It remains only to decorate the plinth and intermediate racks: facing brick, or, for example, a stone.
It is possible to solve such a problem as finishing verandas, combined with the construction of walls, with the help of glass blocks. This material is both constructive and decorative.
Besides, construction markets countries offer a truly huge range of blocks: with corrugated glass, colored, matte. There are options for blocks, with decorative applications in the inner cavity - it's so beautiful!

Various options for glass blocks can be combined as you like, make panels, make backlighting. Of course, the price of such a veranda will be more expensive than the one whose walls are sheathed with plywood or plastic, but the beauty that you get in the end is worth it.
In our example, the windows of the veranda are small, and are high from the floor. But thanks to the translucence of glass blocks, it is light on the veranda without additional lighting.

By the way, in this case, window openings could also be made on the roof, in the manner of skylights. In the construction of the walls of the veranda, you can combine both options mentioned above: make one wall from glass blocks, and the other two from aluminum stained-glass windows.
The fourth wall is bearing wall Houses. It will be decorated in the process interior decoration verandas.

Wood in the veranda

If the veranda is open, then the concepts of exterior and interior decoration are mixed. And most often, such verandas are made of wood: how structural elements as well as decorative.
So:

Of all the materials that can be used to build and decorate a veranda, it is wood that will create the most favorable environment for relaxation, saturating the air with its unique aroma.

Racks supporting the roof of the veranda can be made of rounded logs or timber with a section of 15 * 15 cm. In the very simple version, as in the example above, the floor of the veranda is made of ordinary edged boards, not even painted.
The ceiling is hemmed with a standard clapboard, and the parapet is made of ordinary bars used for mounting the battens.
But many homeowners do not want to save on finishing the veranda, and prefer to decorate this corner for relaxation, solidly and soundly, as they say, for centuries. For such cases, manufacturers of wood finishing materials will always have the right offers.
One of these options used today in exterior finishes is decking. Otherwise it is called terrace board.
This concept can also include garden parquet and deck boards.

It is made not from solid wood, but from a wood composite. That is, it contains polymer additives.
But in this case, this only improves the characteristics of products that are very durable and are not afraid of moisture. And this is very important both for an open space and for a closed, but not heated.

Expensive and high-quality wood for outdoor decoration is larch or ash planken. This is the name of the facade planed board, obtained from a solid array of wood.
Planken differs from the usual planed board in the shape of the section, which has beveled and rounded chamfers. The planken does not have connecting grooves, like a lining board, which allows it to be mounted with gaps, and not just end-to-end.

In principle, a wooden veranda can be attached not only to a wooden one, but also to a brick or stone house. The main thing that color solution her finishing in harmony with the decoration of the facade.
But a tree can not only be painted, but also carved in the design of its surface, and craftsmen in Rus' have always been enough.

Here is a great example of carving in veranda design. There are twisted pillars, and a beautiful carved parapet, painted in contrast to other structures, and hinged arched elements with a lace pattern.
Take note!

Interior decoration of the glazed veranda

The interior design of a glazed veranda can, in principle, be considered as a loggia decoration. But the veranda, as a rule, is more spacious, which means that it has more design opportunities.
So:

Although this room is considered summer, nothing prevents you from installing heaters on the veranda, as in our next example, and using the veranda all year round and not just in summer. Then absolutely any finishing materials can be used.

And here's an example interior design verandas. In addition to the stained-glass windows, the roof of the room is also made of glass, thanks to which the room is simply flooded with light.
To avoid direct sunlight, glazing roof windows used frosted acrylic glass.
An excellent addition to the interior of the veranda can be some unusual blinds or original curtains. The design of the ceiling, of course, will depend on what kind of roof is made.
In addition to wood, you can use plastic and MDF in its decoration, hem it with drywall and paint it, line it with polystyrene tiles, make suspended ceiling- yes, anything.

A terrace in a country house or in a country house allows its owners to enjoy the beauty of nature, breathe fresh air, and admire the surroundings at any time, regardless of the weather. And how nice it is to gather the whole family on the veranda for lunch or dinner in the warm season, enjoying the surrounding beauty!

Veranda finished with PVC panels

But in addition to local landscapes, the aesthetic perception is also influenced by the appearance of the terrace itself, so its decoration plays an important role. The choice of material often depends on the type of veranda (open or closed), the desired design and financial opportunities hosts. If you want, you can see the construction and decoration of outdoor terraces in the article. Maybe there you will find many ideas for your summer cottage.

The easiest way to get a beautiful front lawn
You have, of course, seen perfect lawn in the cinema, in the alley, and perhaps on the neighbor's lawn. Those who have ever tried to grow a green area in their area will no doubt say that this is a huge job. The lawn requires careful planting, care, fertilization, watering. However, only inexperienced gardeners think so, professionals have long known about innovative tool - liquid turf AquaGrazz.

The veranda is a non-residential and unheated part of the house, so its decoration must be done with materials that are resistant to temperature extremes, humidity, and cold. And for an open terrace, you need to select the upholstery even more meticulously, because it will be negatively affected by water and sunlight.

Lining is the most popular material for upholstery of such premises. Wood covers most of the current country verandas in the vastness of our country. And this is not surprising, because a well-treated tree looks luxurious, moreover, it is able to maintain its original appearance for several decades. It's ecological pure material with a unique pleasant aroma, and it is not so difficult to fix it. Clapboard is used to finish the walls and ceiling, as you can see in the photo.

Lining for finishing the walls of the veranda

MDF is a fairly new finishing material that has already earned popularity. Its outer surface imitates wood, which is why such wall decoration is practically in no way inferior to lining, which the photo will help to verify. But from high humidity, the top film warps and swells, which is why MDF is not recommended for use in open areas, but in closed terraces it is widely used for wall and ceiling cladding.
PVC - polyvinyl chloride panels are inexpensive, affordable finishing material, manufacturers offer a wide range of textures, which allows you to perform almost any design of the terrace. Its installation is also quite simple and fast, the only drawback is that the panels are quite fragile, they can break through from a slight blow. Used for wall and ceiling upholstery, as shown in the photo.
Siding is an inexpensive, durable option for finishing the walls of closed and open verandas. This material can be easily applied in open areas, it is resistant to temperature extremes, ultraviolet, humidity, decay and insects. The wide range of colors is also pleasing, which is why the decoration of the room with such panels can repeat almost any design.

What wood to choose? Since natural wood has been and remains the most popular material for terrace cladding, let's take a closer look at its types and selection principle. To decorate walls and ceilings, lining is often used - boards treated with antiseptics and antipyretics with special grooves for fastening.

Starting with flooring

The lining can be conditionally divided into solid and glued. The first is made from a solid piece of wood, often has chips, knots and notches. The second one looks perfect, but the layers of wood glued together with increasing humidity will gradually begin to delaminate, and the finish will lose its original decorative effect. Many builders use timber in their work, you can see how to build a terrace from timber with your own hands - this is an original and economical solution.

For wall decoration open terraces it is better to use grades of panels of class A, B and C, they are made of solid wood, therefore they are resistant to temperature and humidity changes, cheaper options are also suitable for a closed terrace. When buying material, it is necessary to print packs and check the quality of individual boards inside, because sometimes manufacturers hide defective parts in the middle or pack panels of different lengths.

Consider the main types of wood that are useful for work:

Soft varieties - they are cheaper, it is easier to work with them, and they are no less beautiful than hard rock. These include birch, spruce, linden, aspen, pine, larch.
Hardwoods are used for wall and floor cladding of indoor and outdoor terraces. open type. The most popular species are: oak, ash, fir and bamboo.

Floor decoration materials

Consider what material can be used to decorate the flooring:

Terrace board - made of natural wood, can be solid or spliced, that is, glued from individual layers wood, the first is more durable and of high quality. This flooring is perfect for wooden clapboard walls or other materials imitating wood, an example is shown in the photo.
Coating ceramic tiles- an old, proven over the years method of finishing the floor of the veranda, an example is shown in the photo. Quality tiles retains its beauty for many years, and care for it is minimal. But the decoration of open verandas should be carried out by a special floor tiles that can withstand temperature changes and the negative effects of ultraviolet radiation.

Terrace floor with ceramic tiles

PVC tiles are made from quartz sand, polyurethane and vinyl, it is shown in the photo. The floor covered with such tiles is not afraid of frost, moisture and ultraviolet radiation.
Concrete screed - with the help of self-leveling compounds you can get the perfect flat surface floors, resistant to wear, moisture, acids. If desired, such a coating can be decorated with tiles.
Linoleum is a simple, affordable proven option for finishing the floor, but when heated it is prone to delamination, so it is not recommended to use it on an open veranda.

Wall finishing technology

Sheathing of the walls of the terrace is carried out using a frame made of wooden bars with a cross section of 20-30 mm (metal can also be used, but then special linings must be purchased for them, otherwise the fasteners will turn into cold bridges). To do this, fasteners are created according to the level, perpendicular to the future direction of the boards, panels or slabs (for example, if the lining is located vertically, then the frame bars are installed horizontally in increments of about 50 cm), the finished frame is shown in the photo. After the completion of these works, all wooden details are treated with antiseptics and antipyretics to prevent rotting and ignition of elements.

Diagram of the device of the veranda

If the veranda is internal, then it can be additionally insulated, and then it will be possible to use the room even in the cold season. For open terraces, only the walls adjacent to the main building are insulated. Used as a heater mineral wool, styrofoam, polystyrene foam or any other heat-insulating material, it is laid between the bars.

For high-quality heat and moisture insulation, it is necessary to lay a waterproof film under the insulating layer, all the joints of which are glued with special foil tape, cotton wool, polystyrene or other material is laid on it, and on top of the heat reflector with a shiny side to the room, the joints are also fixed with adhesive tape. In the same way, the ceilings of the veranda are also insulated. If you are a fan of one style in design, then in the article which veranda design to choose, you can see the option that suits you.

For MDF and PVC panels, a mounting bracket is attached to the corner of the room, the first panel is inserted into it, the free edge is screwed to wooden frame self-tapping screws, the technology is shown in the photo. The rest of the boards are fixed in the same way.
The lining is fixed:

Veranda wall decoration

galvanized nails, for this they simply drive it into the center of the board and then drown it with a striker;
stapler - mounting brackets are driven into the edge of the panel using a construction stapler;
kleimers - they are attached to the grooves of the previous board, after which the panel is fixed with self-tapping screws and a kleimer, in this way the verandas inside the house are finished.

Wall decoration video

The technology of finishing the floor of the terrace with tiles

Glue is chosen depending on the type of tile, each manufacturer recommends certain adhesives. A notched trowel is used to apply the substance.

Tiling is done like this:

the floor surface is prepared, a concrete screed is being made;
glue is applied to the tile or surface, achieving perfect distribution;
the width of the joints depends on the size of the tiles and is approximately 3-7 mm;
first, the tiles are installed along the center line, moving towards the edges, as in the photo;

The result of the work in the picture

install all the whole slabs, and then proceed to finish the sides of the room;
tiles are cut with a special tile cutter or machine, cutting the material into a quarter of the thickness and then breaking it off with your hands, the edges are ground before laying;
seams are rubbed with special compounds.

The most favorite and visited place in a private country house is often a terrace, and it correct design will give the room comfort, warmth and beauty. And at the end you can choose any