Decorative stone is today one of the most suitable materials for finishing surfaces both inside and outside buildings. This material is quite easy to process, it can not only be drilled, but also cut. But to get good result technology should be followed installation work, it will be presented below. You can use decorative stone for interior decoration, as one of the elements of which is the arch.
Instrument preparation
Decorative stone begins with the preparation of tools, among which are:
- construction mixer;
- cutting machine;
- mixing bucket adhesive solution;
- paint brushes;
- trowel;
- grout syringe;
- wedges of the same thickness.
Among other things, you will need a building level and a spatula. It is important to take care of the presence of a metal brush and with the help of the latter you will be able to adjust the elements on the surface after laying. To measure and cut the material, you will need a construction tape measure. In the process of work, you can not do without a household spray gun. Wedges can be made of wood and plastic, they will allow the formation of seams. You can replace the cutting machine with a cutting machine.
Preparation of materials
Decorative stone is carried out after the preparation of all the necessary consumables, among them should be highlighted:
- glue;
- primer;
- grout;
- water repellent.
When choosing a glue, you need to pay attention to its purpose. Available for certain finishes different varieties adhesive compositions, they are usually designed to hold the calculated weight of the material. Therefore, to begin with, you must choose Decoration Materials, and only then proceed to the acquisition of glue. If the work is supposed to be carried out at low temperatures, then the choice of adhesive composition should be taken more seriously, it must have the appropriate properties.
Surface preparation
Finishing with stone necessarily involves the preparation of walls. To do this, you need to get rid of the base old whitewash, wallpaper or paint. The master will have to level using putty. The surface of the arch must be primed, this composition will fasten small particles together, so any finish will be held as tightly as possible.
On sale you can find primers for any surface. If you have to work with concrete wall, then it should be treated with Betonkontakt primer. When the conditions in the room are different high humidity or temperature, the back side of the decorative stone must be moistened before laying.
Arches decorative stone carried out according to a slightly different technology, if we are talking about a drywall construction. To prepare for such work, you need a light stone. It is necessary to carry out such manipulations exclusively indoors. If the arch from the GKL is on outdoors or under a canopy, then it is impossible to decorate it with a stone.
The surface of the drywall is treated with a primer, which should be left until it dries, only after that you can proceed with the installation of products. The primer is applied with a roller, and not only the outer, but also the inner surfaces are treated with the composition.
Preparing the stone for laying
If you will be finishing arches with decorative stone (photos of design options are presented in the review for reference), for starters, it is recommended to mix all products from different packages first. On the next step the stone must be laid out on the floor. Position individual elements is chosen in such a way that the texture looks the most advantageous. For example, you can distribute elements by shade or shape, as well as size.
Rules for applying glue
Before starting work, you must read the instructions and dilute the glue in the bucket according to it.
The composition is mixed with a construction mixer until a homogeneous mass is obtained. Using a spatula, the mixture is applied to the wall only in the place where the product is supposed to be installed. On the reverse side, the stone must also be treated with glue, which is applied with a spatula. The layer thickness should not seem more than 1 cm. If this parameter is exceeded, the product will slide down the wall.
The adhesive is applied to the entire surface of the stone, while avoiding voids that can cause condensation inside the masonry during operation. This recommendation also applies to walls, on their surface the adhesive should be applied in a uniform layer.
The method of installation of decorative stone
When finishing the arch with a decorative stone in the apartment, you must follow certain instructions. The stone is applied to the place treated with glue and pressed against the surface. In this case, it is important to use the building level, and with the help of a mallet, the products are aligned vertically. The stone can be moved from side to side to achieve its snug fit to the surface.
In order to check how good the masonry is, during installation it is necessary to tap the products with a screwdriver handle. This will allow you to understand whether voids have formed inside. If there are any, then the stone is removed, cleaned of glue, and the work is repeated anew. When finishing the arch with a decorative stone in the apartment, you should definitely consider the photo. They will allow you to understand which material is better to prefer. As soon as the finish is on the wall, you need to gently tap on its surface, the adhesive that has come out is removed with a spatula. If the mixture appears on the ends, it is not necessary to remove it, it will improve the quality of adhesion of the material to the wall. Work can be carried out using one of two technologies:
- without seams;
- with stitching.
Laying stone with seams
When finishing the arch with a decorative stone with your own hands, you can form seams between the products. Their grouting is carried out using a syringe filled with grout. The solution must be applied in such a way that it extends 4 mm from the outer edge of the product. This will form a clearly defined relief. To obtain a smooth texture, it is necessary to fill the seam at the same level with the front surface of the stone. 30 minutes after applying the grout, it is necessary to smooth the seams with a special spatula or spatula. When choosing a grout, you should be aware that the compounds can mimic the color and texture of a real grout. The grout may have a different color.
Chip treatment
When is the finishing door arch decorative stone, it may be necessary to process chips. The stone is cut to size, but if its edge remains even at the junction, then the wall will not look natural. You can perform a chip by outlining its outlines with a knife. At the next stage, the excess part is bitten off with pliers. You don’t need to bite off the products along the edge of the mark, you need to start with small pieces, otherwise the product may break in the wrong place. You can correct errors with a file, with its help you will give the chip smoothness. Additionally, the surface is treated with sandpaper. However, sometimes the chips do not smooth out.
Final decoration
Finishing the interior arch with a decorative stone can be completed by applying varnish or tinting mixture. The latter allows you to hide defects and cracks that have formed in the process. To apply the composition, it is better to use an airbrush, however, some masters manage paint brushes. The airbrush allows you to apply the mixture with long distance while holding the tool at an angle to the surface to be painted. You should not cover the entire area completely, it will be enough to tint the main protrusions and depressions, this will help to get a deep texture.
An interesting effect can be achieved if bronze or gold coloring pigments are used as the basis for the mixture. In this case, it is necessary to tint only the ends of the tiles. Metal with this finishing technique is not striking, but with a certain illumination of the ends, the masonry begins to play with golden highlights.
Conclusion
The arch is a rather small element of the interior, but its decoration sometimes takes several days. However, you should find time and effort for this work, because decorating this part of the room will allow you to decorate the house, making it more comfortable, and the interior more refined.
Decorative stone is one of the most suitable materials for finishing surfaces both indoors and outdoors. Due to its functional and aesthetic advantages, it is increasingly being used to decorate a variety of arches.
Peculiarities
Arch is the one architectural element, with the help of small area you can visually make more, and spacious - effectively zoned. A well-decorated passage saves and visually expands the room, functionally separates adjoining rooms and at the same time forms a single interior, creating the desired atmosphere in an apartment or house. Most often, the arches are made of drywall, and then lined with the selected material.
There are many options for processing openings in an apartment: using gypsum, wood, forged elements and, of course, stones: sandstone, shell rock, granite or marble. However, durable natural stone has a high cost, so today its artificial substitutes are increasingly being chosen.
This happens for many reasons:
- Finishing the arch with decorative stone will cost you much less.
- Using this material, you can imitate the pattern of any rock.
- The weight of such a decor will be much less, which can also be a plus - by no means any wall is able to withstand the weight of a real stone.
The decorated entrance to the hallway has both an aesthetic and a practical function. It is here that the owners, guests, and their pets most often move, which means that the passage is heavily polluted. decorative trim it gets dirty less and is easy to clean, also dirt is not noticeable on its surface. Of course, she also immediately attracts the eye.
Since the decoration with a decorative stone is able to repeat the pattern of any natural rock, you are able to decorate in a similar way and interior doors– it is easy to choose a variation suitable for a specific interior. In most cases, the choice is made in favor of brick imitation, small pebbles, marble or granite.
Design options
The process of laying decorative stone is quite simple, so you can decorate any arch with your own hands.
Traditionally, laid out stones form a side strip around the arch, but in some cases it is decided to decorate the entire wall as well. Such decoration with decorative rocks is used not only for doorways, but also for facing windows, niches and built-in furniture. If you have a free niche in a city apartment, then turn it into an arched fake fireplace and put a few burning candles there.
A composition of several arches located in the same space will look very stylish.
Decorated artificial stone arched openings can, on the one hand, in harmony with the color of the walls, not focus on themselves and act as a backdrop for bright furniture, and, on the other hand, become the center of attraction and bright design solution. In the event that the arch connects two rooms in dissimilar styles, decorate it on one side only.
Arches made of artificial stone come in different geometric configurations:
- classic - straight sides and arched top. Usually, they are used for completely dissimilar styles, since the design fits organically into any interior;
- ellipsoid - with an arc in the form of a regular or irregular oval;
- rectangular or portal - the side and upper parts form a right angle;
- round - look curious in combination with bright, colorful walls. They are usually preferred by owners of futuristic interiors;
- curly - the sides form smooth lines and thereby violate the perpendicularity with respect to the floor.
The shape of the arch depends on the size of the opening and the height of the ceiling, the function of the room and its design.
The pattern of the cladding is symmetrical and not symmetrical. Finished using the “torn stone” technology, the arched openings do not have symmetry, but they look non-standard and complement the rooms with the original layout. A symmetrically lined arch with stones to match the wall looks better in classic, calm interiors. Combine a variety of shades of the same color and alternate vertical and horizontal tiles.
Openings are divided into passive and active. The former act as a simple border, while the latter, which differ unusual shape, and they themselves are an interior decoration. Simple passive types include such types as classical, modern (with a pronounced rise), romance (the arc is rounded on the sides, but cut off at the top) and others. Complex active ones are oriental, horseshoe-shaped, trapezoidal, lancet and others. They have jagged edges and are sometimes located at several levels.
There are also two ways of laying artificial stone: seamless and with the preservation of seams. In residential areas, the seams are usually preserved, as this gives the arch a special zest. They are made wide enough, and then filled with grout of the desired shade.
Often the design of the arched opening is complemented by the creation proper lighting and decoration with plant elements. The choice of fixtures depends on the style of the arch: there are built-in and inconspicuous models, artsy sconces, or bright LED lights.
With the help of light, the expected mood is given: mystical, solemn and upbeat, calm and relaxed, or neutral.
Material selection
Decorative stone is created from natural components: expanded clay, cement and pumice with the addition of a special mineral pigment to give color. Such material is considered environmentally friendly and safe - it is not afraid of corrosion, rotting and fungal diseases. Upon completion of the drying and firing processes, it receives a durability that is in no way inferior to the original.
The decorative stone is resistant to very high and low temperatures, therefore, it is often used for facing fireplaces and exterior walls of a house. It is also used in rooms with high humidity: swimming pools, bathrooms and others. It is worth adding that an arch made of such material is easy to clean and dry with conventional means.
Currently, it is possible to choose a decorative stone that imitates any natural stone, not only in color, but also in texture. Therefore, the choice of materials should depend solely on the design of the room.
Tiles are sold in flat plates of different thicknesses and sizes. still exists corner option which helps to arrange without problems upper part arches. But it should be selected very carefully, completing all the calculations.
The most popular are imitations of shell rock, granite, slate, marble and travertine. The surface is smooth, or resembles a rough and untreated stone. The basis of the decor is made of acrylic, quartzite, or with a base of gypsum, alabaster or a mixture of cement and sand.
If the arch itself is made of drywall, then choose a flexible, lightweight acrylic material, or plaster tiles. A brick arch can be decorated with stones on a sand-cement mortar. In addition, try to choose a narrow tile - it is easier to mount it on the semicircular part of the opening. The cost of such material depends on the country of manufacture, firm, quality, weight and even patterns on the stone.
The installation process is quick and hassle-free. You do not have to purchase additional mounts and involve craftsmen. But in any case, before starting finishing works all stones must be checked.
First you need to prepare the material:
- Open the packages and mix the parts.
- See how they will look the most advantageous. Combine them, according to shades, and long with short ones - the arch should look natural.
- Flip the pieces over to the back to check for a foamy layer that will make the tile less likely to stick. If it is, clean it with a metal brush.
What else do you need?
To finish the arch, you will need at least the following tools: what you will cut the stone with ( hand saw or Bulgarian) construction knife, level, hammer, sandpaper, chisel, glue.
The step-by-step process of facing looks like this:
- Cut the decorative stone into several pieces or thin tiles. Prepare the surface of the arch in advance by cleaning it of dust and dirt, old wallpaper, paint and whitewash. Make a few notches, which will allow the glue to stick better. You can also apply a primer, after which it is important to dry the structure.
- Having prepared "liquid nails", cement mortar or some other adhesive composition, start gluing tiles from the bottom of the arch, from its junction with the floor. Pay attention to the weight of the stone - some brands are not able to bear heavy samples. Apply glue to the wall with a spatula and press the stones more tightly, but do not overdo it, otherwise cracks will occur. Leave a gap of 5 millimeters between them. Keep in mind that adhesion will be higher if the tile contains the same ingredient as the surface on which it is glued.
- Work through the row on both sides of the arch, and then move on to the next. Line each one up using a level and use plastic crosses. If available corner stones, then use them to decorate the corners. If there are none, then overlap the flat ones - this way you will give the structure stability.
- After that, start rounding. At this stage, you need to cut the stone yourself to give it desired shape, applying grinder, construction knife or wire cutters. For roughness, use sandpaper and a file. Partially lay the stone on the nearby wall surface.
- After a couple of days, when everything dries and sets, start filling the tile joints with cement mortar or grout. You can choose a grout of any color, depending on the design of the room. Avoid getting liquid on the surface of the stone, remove excess immediately with a soft cloth. After the arch is completely dry, cover it with acrylic varnish or even paint. Minor errors are hidden with an airbrush.
More information on how to stone arch in the interior, you will learn from the following video.
Interior arches - very original way decorate your interior. The arched opening always attracts, someone has an association with a triumphal arch, for someone it is the entrance to a grotto or a mysterious cave. Anyone who makes an arched opening in their apartment gets comfort and visual expansion of space. But it is very important to properly arrange such arches.
There is different ways arch finishing: , forging. But none of the methods mentioned will look as natural and unobtrusive as decorating the arch with decorative stone. First, there is different types stone for every taste, and with the help of each of them you can create a beautiful, unique interior. Secondly, the stone has a number of advantages, and the first of them is reliability and durability.
In this publication, "Dream House" offers to see how interior stone arches look in the interiors of apartments and houses, as well as how beautifully and in an original way they can be designed, so that the result is an interesting design object.
Methods for decorating arches with stone
Finishing interior arches decorative stone is used in modern interiors often enough. This type of decoration allows you to embody many design ideas. For example:
- with a granite stone in the form of a brick, the arch is stylized as the entrance to a castle or cave;
- an arch framed with blue-green, light stones looks like an entrance to a grotto or an underwater world;
- there is at all unusual decision- stylized as a dragon's mouth, this option is suitable for a children's room, especially if he lives there.
Arch decoration with decorative stone photo
Arch made of decorative stone photo
Interior arches made of stone photo
And that's not all possible options finishing arches with decorative stone, but all these techniques often require additional decoration.
Illumination and flowers: additional decoration of stone arches
First of all, do not forget about such additional decoration methods as the use of light and plants. Vegetation is indispensable when the arch is stylized as an entrance to the underwater world. It will not be superfluous in other cases.
Mystery and solemnity are given to the arched opening by illumination. With soft light, the "green" arch will look like an aquarium. And certainly not without the use of light in the case of the "dragon head".
Finishing arches with artificial stone photo
How to decorate the arch with a decorative stone
Decorative stone arch: only advantages
It is worth once again dwelling on the advantages of decorative stone and emphasizing that it has practically no drawbacks. The artificial material of which it consists is not subject to corrosion and decay, will not suffer from fungal diseases. In a word, he is very reliable.
Lovers of natural need not worry, because the decorative stone consists of cement, pumice, expanded clay and other equally environmentally friendly fillers. Pumice is a volcanic glass formed when flowing lava cools rapidly. The gas released at the same time leaves large depressions inside, making pumice frost-resistant, giving it valuable properties heat insulator. Expanded clay is fired clay balls or slate. Perlite is again a material of volcanic origin.
A reasonable question may arise: why is the real natural stone? The answer is simple: even if the customer has enough material resources for the purchase natural stone, then it is not a fact that it is suitable for an arched opening. Not every base (wall) can withstand the weight of such a cladding - natural stone is very heavy. For example, granite is 3 times heavier than decorative stone.
It is worth mentioning some more advantages of finishing the arch with a decorative stone:
- Artificial stone is very easy to care for: a simple wash with any non-abrasive detergent is enough.
- Manufacturers of decorative stone have mastered their production so well that it has become possible to create a stone that imitates any natural one. Moreover, similarity is achieved not only in color, but also in texture.
- And the process of laying the stone is so simple that, if desired, it is quite possible to cope with the decoration of the arch on your own.
Decoration of arches with decorative stone photo
How to lay out an arch with a decorative stone
At the decorative finishing stone certainly has its fans. After all, it is practical beautiful material, laying of which even a non-professional can do.
The variety of textures and a wide range of colors of stone will help to decorate the interior in various styles, create coziness and comfort in your apartment or private house. Most widely facing material used for finishing walls, columns, kitchen "aprons", niches and doorways, including arches.
For internal works most often used artificial stone based on gypsum. It is lightweight (much lighter than concrete counterparts), breathable, environmentally friendly pure material with high performance.
Today we will dwell in more detail on the decoration of arches and doorways with decorative stone.
Types of decorative stone
- decorative brick
Brick of a natural shade is a popular material in the interior in the loft style. Tile "under the brick" imitates brickwork. The brick arch looks good in combination with ceiling beams dark color in the interior in the style of "country".
White brick will make the room more romantic and light. Suitable for interiors in Scandinavian, Mediterranean and vintage style and of course in the style of "Provence".
- shell rock, sandstone
Facing tiles made of shell rock will fill the interior with light and warmth. The warm colors and porous surface go well with columns in antique-style interiors.
- limestone
Limestone tile or its imitation is distinguished by texture and a variety of shades: from white to brown.
- river stone
This cladding looks very brutal, reminiscent of a medieval castle or the entrance to a cave. A large stone is suitable for the interior in the style of "chalet" and in the Gothic style.
Looking for suitable options, it is useful to study the catalogs of the finishing material. Finished goods from natural stone, there are dozens of different items, skillfully combining which, you will get a harmonious interior sustained in your style.
Making an opening with a stone has a number of advantages. Firstly, it is the protection of the side surfaces and outer corners from abrasion and dirt. Secondly, this finish is more durable.
Thirdly, the opening or arch acquire interesting view, can become an accent in the interior or emphasize its general style.
Finishing the doorway with artificial stone will help to visually combine the hallway with the living space, it looks great in combination with decorative plaster or smooth painted walls.
Decorating openings, arches and walls with natural or artificial stone gives wide opportunities for the flight of design ideas in interior design. Light pastel shades stones are in harmony with various frescoes.
A long corridor can be visually “divided” into sectors with the help of arches lined with stone, and “expanded” by decorating the walls with mirrors.
Performing decorative stone work
Artificial analogues of decorative stone attract the buyer with their affordable price, and appearance almost indistinguishable from natural material. You can also save money if you perform cladding work without involving specialists.
For it is necessary to select light material, and narrow tiles are easier to lay on the arched (vaulted) surface of the opening.
The composition of the adhesive solution directly depends on the material chosen for the finish. It is necessary to knead the glue, following the instructions on the package. Use a special mixer for kneading so that the structure of the solution is uniform and plastic.
The surface of the walls must be clean and treated with a primer. For better adhesion with glue, some experts recommend making notches on the wall.
The glue is evenly applied with a spatula both on the wall at the place of gluing and on the back side of the tile. The layer thickness should not exceed 5-10 mm.
After attaching the tile to the wall, press it and seal it with a rubber mallet, tapping on the surface. Carefully remove excess glue around the edges with a spatula. The drying time of the glue is about a day or two.
Decorative facing stone can be laid in two ways: with and without jointing. When laying grouted tiles, use plastic crosses or wooden wedges of the desired thickness.
Grouting is usually done with a solution using a special syringe. After some time (20-30 minutes), after setting the solution, the seams are smoothed with a spatula for jointing.
At the end of the masonry, after the grout has dried, it is recommended to clean the artificial stone from dust, cover it with transparent acrylic varnish on water based, for less abrasion of the surface during operation.
Subject to the sequence of work, the decoration of arches and openings, however, as well as the decoration of walls, is within the power of any person who has the desire and at least some skills in repair. Without hiring builders, you can transform your house in a short time by decorating it with stone.
Finishing the arch with stone makes it possible to make the interior unusual and memorable. Such unusual design openings will surely attract the attention of guests at home, help you be proud of the decoration of your apartment in front of your friends.
Original decorative arches decorated with artificial stone turn the interior into a mysterious cave. By choosing unusual arched structures for decorating doors, you will receive visual expansion space.
As the main materials for finishing the arch, you can pick up wood, stucco, metal. Despite this diversity, ideal option to create an arch, professionals consider a decorative stone.
Currently you can choose different kinds this material. The arch, which is decorated with artificial stone, will be an excellent addition to the interior, will bring a certain zest to it.
Advice! If your plans include the creation of a durable and robust design, in this case, choose the stone.
Advantages
Decorative stone is practically devoid of any flaws. It is made from a material that is not subject to chemical and atmospheric corrosion.
In addition, it is called an environmentally friendly finishing material.
It contains cement, pumice, expanded clay. Pumice is a glassy substance that has a specific origin, similar to the lava of a volcano, since it is formed during the instantaneous solidification of the mass. Pumice has an airy structure, so it does not let out of the room warm air. Expanded clay is fired clay balls.
Thanks to the wide range artificial material, you can pick up an imitation of natural stone, similar to natural material.
Arches in the interior
How the arch is finished with decorative stone in the apartment, photos, some nuances of finishing work, all this can be seen in the video
Advice! In order to create an unusual entrance to an underwater cave in your home, you can arm yourself with blue-green and light beige stones.
The decoration of arches with decorative stone currently allows the owners of urban real estate to realize the most daring creative ideas and projects.
Attention! Finishing the arch with a decorative stone in the apartment involves additional decoration so that it becomes a harmonious part overall design premises.
For example, if an arch is chosen to enter the underwater world, it is necessary to use plants as additional decorative elements.
To give the atmosphere of the room some mystery and solemnity, you can arm yourself with additional lighting. An arch decorated with green plants, illuminated additionally, will become a complete illusion of an aquarium.
Selection of materials for creating an arch
Before you start finishing the arch with a decorative stone, it is important to choose the right finishing material. Professionals prefer to choose narrow tiles for finishing. In this case, you can simplify the process of decorating the bends of the structure.
Attention! When making drywall construction, it is important to take into account the weight of the stone selected for work.
If the material is too heavy, the drywall will not support it and the structure will not look good.
You don't need help to do this kind of work. professional builders. If you use some algorithm of actions, in this case it is quite possible to build beautiful arch and even decorate it however you like.
Before proceeding with the finishing work, you first need to remove all dirt from the surface of the arch, as well as carry out its high-quality primer. These actions are important, because the final result of the finish depends on how well the surface is prepared, because the decorative stone will not stick to uncleaned surfaces.
Advice! If formalization is expected smooth surface, initially it is desirable to make additional notches.
Then you can proceed to the preparation of the cement mortar, choosing the proportion taking into account the type of stone, its size, shape. It is at this moment that it is important to fulfill all the requirements that are imposed by the manufacturer of this finishing material.
Only after all preparatory work are fully completed, you can proceed to the direct masonry. The stone is laid on the sections of the arch that are in contact with the wall.
Advice! In order for the decorated arch to be beautiful and aesthetic, you will need a building level, as well as plastic crosses.
First, the stone is laid in the lower part, then smoothly move up.
To finish the arcuate part of the structure, it is first important to mark the material itself. It is applied to the wall, then cut off.
Attention! It is important to maintain the radius of the arch so that the finished arch is smooth and beautiful.
The places of cuts are ground, armed with a special grinding machine.
For accurate cutting of the product, according to the previously prepared markings, you need to walk several times with a knife. All excess can be removed using ordinary pliers. For the same purposes, you can use a grinder or pliers, as well as sandpaper. The rest of the elements are adjusted in the same way.
After finishing the finishing work, you need to wait a while for the cement mortar to completely harden. Professionals advise to withstand a couple of days, and only after that proceed to the processing of seams, armed with a special putty.
After the initial processing of the decorated structure, you can start painting the stone.
Tools for the job
From the tools necessary for work, we single out a cutting device, a level or a plumb line, a tape measure, a spray gun, wedges, a brush for cleaning metal, a spatula.
As consumable for registration arched structure you will also need special glue.
Advice! Try to select the adhesive based on the weight of the stone so that it does not fall off immediately after you complete the finishing work.
Work must be carried out at an air temperature of more than five degrees. Before the stone is fixed, it is advisable to check it for the presence of cement laitance (foamy layer). When it is found, it is important to clean the back side, armed with a metal brush.
The fact is that such a film significantly reduces adhesion, which can lead to peeling tiles.
In order for the adhesive mass to be homogeneous, you can use a construction mixer.
Advice! Do not apply too thick a layer of adhesive, as the tile will slide off the wall and you will not get the desired result.
Conclusion
Arched structures are suitable for those owners of urban and suburban premises who do not want to put up with ordinary interior. Depending on what are individual characteristics premises, you can use a variety of finishing materials to create arches. Among the most common materials for work, we can distinguish construction drywall. It is this material that is often the basis for the manufacture of such unusual designs.
Observing the tile to the right place, pressing it lightly, you need to arm yourself building level so that the stone is laid beautifully. Only if you follow all the recommendations given by the manufacturers of decorative stone, you can count on getting the desired result.
Certainly, at unusual design doorway, for example, using the original decorative arch, you can make positive changes to the design of an apartment or house.
Loading...