It is no secret that the repair of the ceiling in the corridor is considered one of the most difficult tasks. The reason is simple - their evenness and height are often far from ideal. So when it comes to finishing and choosing materials, it's worth asking yourself: how to mask imperfect ceilings in the hallway and make a good impression on guests?
The market for modern materials is so rich and diverse that the question of what kind of ceiling to make in the corridor is no longer as acute as it was 10-15 years ago. All options for arranging the ceiling surface can be divided into two types:
- installation of materials on the base (main) ceiling;
- fastening to already assembled structures.
The first type includes whitewashing and painting, as well as wallpapering. Even with the advent of modern materials, these classic finishing methods do not lose their popularity. Also, ceiling tiles and decorative plaster are attached to the ceiling. Before installation, the base surface needs pre-treatment. The previous finish is removed, the ceiling is primed.
Whitewash option 
With wallpaper 
Painted variant
In the second group, we include plastic panels as a practical and inexpensive type of finish. Plasterboard and stretch ceilings, as well as multi-level structures compete with them. All of them involve a decrease in height by a few centimeters, but do not require special surface preparation.
We will consider each of the materials listed above in detail. This will allow you to compare your expectations with the actual result, help you make the final decision.
With stretch fabric 
From drywall 
From plastic panels
Whitewash
When the ceiling is perfectly even, and no one makes special demands on it, whitewashing becomes a truly good choice. She has two weighty advantages: low cost and ease of execution. However, the quality leaves much to be desired. Just a white ceiling in modern apartments is becoming less and less common.
Painting
Compared to whitewash, it looks more presentable. If you search well, you can find an interesting shade, choose the right texture. Once again, the paint will look good only on a pre-aligned ceiling.
Ceiling paint options 
Decorative plaster
A good choice for a corridor with a flat surface. Many choose decorative plaster for the reason that you can create an original drawing without serious financial costs.
Finishing options with decorative plaster 
Wallpaper
You can stick wallpaper on the ceiling in the corridor yourself - and this is the first plus. The variety of the pattern, limited only by the imagination of the consumer, is the second advantage. By the way, if the coating is of high quality, it will look no worse than expensive types of ceiling finishes. Keep in mind that to achieve the desired result, the plane must be leveled.
Ceiling wallpaper options 
pvc tiles
Each of us has heard the phrase "cheap and cheerful." So, it is very suitable for the corridor, in which the ceiling is made of PVC tiles. You will properly care for the material - and you can forget about the next repair for many years.
PVC tiles in the hallway 
Drywall
A material that puts all previous finishing methods on both blades. How to make the ceiling in the hallway beautiful, reliable and at the same time unusual? That's right - use GKL. The advantage is that spectacular spotlights can be mounted in the plasterboard ceiling.
And if you do the installation yourself (by the way, every owner can do it), you can significantly save costs.
Drywall design options 
Rack construction made of aluminum
Aluminum panels are no better or worse than drywall, they are just different. They are stylish and practical. By the way, here you will also have the opportunity to install spotlights spots. Aluminum is good because it does not let water through and is resistant to high temperatures.
Rack aluminum structures 
Slatted wooden structure
Even in a narrow corridor, wooden slats create a warm, homely atmosphere. The quality of the material plays a huge role. You can get both a simple and unremarkable surface, and an expensive, luxurious surface. With the installation of lighting fixtures, too, there will be no problems.
Slatted wooden ceiling with false beams
Stretch fabric
We declare with all confidence: this year stretch ceilings remain the most popular, attractive and practical option for finishing ceilings in the corridor. They haven’t come up with a better one yet - except perhaps multi-level structures with a combination of drywall and stretch ceiling.
Indeed, this material is durable and simply boundless choice of textures and colors. If you turn to professionals, installation is carried out quickly enough and relatively inexpensively. You can do the installation yourself, but it will take a lot of time.
Stretch ceiling "Wave"
Rules for registration - everyone should know
Whatever material you choose, do not forget about simple design tricks that affect the overall perception of the ceiling. For example, in narrow corridors it is recommended to install a glossy stretch ceiling. Together with well-organized lighting, it significantly expands the ceiling space.
If the ceilings in the room are very high, and you want to visually underestimate them, the surface is painted in dark colors.
In a large hallway, it is better to give preference to multi-level structures. They will allow you to create a three-dimensional drawing, and they look interesting. A real classic is considered a matte finish with several bright spots. It looks expensive and elegant. A dark, shiny ceiling gives the room a fantastic, mysterious atmosphere.
Remember that people are greeted by their clothes, and the apartment is greeted by the atmosphere in the hallway. That is why it is so important to think over all the details, from the interior to the ceiling. You can get acquainted with the most successful options for the ceiling in the corridor in our gallery.
Slideshow of the design of narrow hallways
Photo gallery of ceilings in the corridor
The ceiling in the hallway is a kind of hallmark of the house. It is here that the first impression of the style preferences of the owners is created. Therefore, when planning repairs, it is advisable to pay due attention to the ceiling in the hallway.
Ceiling design options in the hallway
As in any other room, the ceiling in the hallway can be painted, whitewashed, and inexpensive foam tiles can be glued onto it. All these options are profitable from a financial point of view, but few people are already satisfied with the aesthetic. Those who decide to stop at one of these finishes simply do not realize that more spectacular ways to decorate the ceiling can also be inexpensive and affordable.
Modern options for ceilings in the hallway:
- rack;
- from plastic panels;
- tension;
- suspended plasterboard;
- with decorative plaster;
- covered with plastic mirror tiles.
Distinctive features of suspended plasterboard ceiling
Plasterboard ceiling more than others requires financial costs and physical effort. These structures are mounted on the basis of a frame made of a metal profile, which is subsequently sheathed with plasterboard. With the right choice of “pattern”, such a ceiling can visually enlarge, as a rule, a small hallway space.
If the plasterboard ceiling is made two-tiered, with a protruding niche around the perimeter and a figured recess in the middle, the room will seem higher. A small ledge on the ceiling, located at the wall opposite the front door, can visually increase the width of the hallway.
The plasterboard ceiling is also good because it allows any finishing options - painting, tiling and wallpapering, applying decorative plaster. And the lighting built into the niches will help create a welcoming, cozy atmosphere in the hallway.
A classic single-level plasterboard ceiling is relatively easy to make, requiring at least two people and minimal knowledge of construction technologies. You will find detailed step-by-step instructions in.
Distinctive features of a stretch ceiling
The device of a stretch ceiling is not as expensive and troublesome as it might seem at first glance. Installation in a small room does not require significant financial and time costs. All work can be done by hand, without inviting specialists. But for this you need competent detailed step-by-step instructions.
Prices for rack ceiling
rack ceiling
Everyone knows about the showiness and variety of color schemes of stretch ceilings. Therefore, it will only be necessary to choose the film pattern that is in harmony with the interior design. Each manufacturer of stretch ceilings offers a catalog of samples. At each point of sale of stretch fabrics, designers work to help you choose the most impressive option for a particular room.
The installation of a stretch ceiling consists in fixing a lightweight, durable film or fabric made from high quality material in a framing structure that will keep the panel taut. Read more.
Distinctive features of the ceiling made of plastic panels
The ceiling made of plastic panels attracts, first of all, with its low price, modern appearance and ease of maintenance. To decorate the hallway, you will need a small number of panels and wooden blocks. The latter are needed for the device of the crate and serve as a support for the finishing material.
Any owner who does not even have experience with this material can handle the assembly of plastic panels. Each panel is equipped with a protrusion on one side and a recess on the other, so the assembly is carried out according to the tenon-groove principle. Manufacturers offer a wide range of colors and patterns of this finishing material. Therefore, there will be no problems with choosing the material most suitable for the design of the hallway.
Video - Installation of panels on the ceiling and walls
Distinctive features of the ceiling made of plastic mirror tiles
Mirror tiles are attractive, first of all, for their reflective ability. Thanks to it, any room will become visually more spacious. It is important that such a tile can reflect light, which will make the hallway lighter and more comfortable.
Mirror tiles are an inexpensive finishing material, quite durable and light in weight. Therefore, its installation is simple and convenient. The tiles are glued to a flat surface, so the base ceiling will need to be. The most convenient compositions based on gypsum.
Distinctive features of the ceiling with decorative plaster
Modern methods of applying plaster allow you to create an atmosphere of an old castle, a respectable bungalow, a unique house in the room. All these techniques are easy to perform and can be implemented even by a beginner. To decorate the ceiling does not require a large amount of plaster mixture. Of the tools you need only a spatula.
Prices for plastic panels
plastic panels
The composition of decorative plasters, as a rule, already includes pigment. But you can buy white plaster and paint it exactly as required for a particular room. Effective reception - varnishing of decorative plaster. Such a protective coating will increase the life of the finish and make it even more attractive.
Ceiling plastering is a repair process consisting of a number of stages. If you do not want to be disappointed as a result of plaster work, then you must take into account all the nuances that you can learn about from.
Distinctive features of the ceiling made of aluminum or plastic rails
Mounted from a thin profile (rails). These structures are of two types: slotted or slotless (or otherwise: open and closed type). The former are distinguished by the absence of gaps between the panels, so they look like a continuous canvas with barely noticeable seams. The latter, due to the small gaps between the panels, give the impression of a type-setting ceiling. Both those and others are an excellent solution for decorating the ceiling in the hallway.
Slatted ceiling in the hallway
Slatted ceiling - one of the most profitable options for decorating the ceiling in the hallway. Like any other type of finish, it has its pros and cons. After evaluating each of them, we can conclude whether this method of ceiling cladding is suitable in a particular case.
Choice of material and mounting method
As already mentioned, rack ceilings are of two types. But they differ not only in the way of laying, but also in the design features of the rails. The slot-type panel has a U-shaped profile. The gapless type rail is equipped with a stepped ledge, with which it is attached to the adjacent panel.
Rails are made of aluminum, steel or plastic. Metal ones have a varnish coating, which can be of any color, but always glossy. This determines the reflectivity of such ceilings. Therefore, they are often installed in small areas: bathrooms, bathrooms and showers, hallways.
When buying, you need to pay attention to the length of the panels. Most manufacturers offer slats with a length of 4 m. Such panels are difficult to transport and cannot be transported in an elevator. Therefore, they have to be cut in half beforehand, while receiving slats 2 m long. Not every outlet provides such a service, so the length of the panels is an important criterion for their selection.
Drywall prices
drywall
Transportation must be careful. It is necessary to prevent the possibility of impact, otherwise barely noticeable dents will remain on the aluminum rails. But on the mounted ceiling, they will be visible due to its reflective ability.
Table. Distinctive features of rack ceilings of open and closed type.
| open ceiling | Closed ceiling |
|---|---|
| Forms a flat solid surface | Forms a textured embossed surface |
| Due to the absence of depressions, it is easier to maintain than a closed type ceiling | The presence of slots allows for better ventilation of the space above the panels, which is important when installing recessed lighting |
| To close the space between the panels, a special profile is required - layout | Does not require a profile to close gaps, therefore more cost-effective |
| Allows you to design a multi-color ceiling | Colored panels with gaps are not so attractive |
Complete set of rack ceilings
You can order an individual rack design or buy a ready-made standard. Manufacturers offer kits for sanitary facilities with dimensions of 1.7x1.7 m and 1.35x0.9 m. To design a ceiling of other sizes, you will either need to select the equipment yourself in accordance with the parameters of the room, or contact the outlet manager for help.
What is included in the standard package of ceilings.
- ceiling rail. Standard width 50mm, 84mm, 100mm, 150mm. You can choose any color according to the RAL table.
- Tire(traverse, comb, stringer) - a bar designed to fix the panels to the base ceiling. Equipped with special notches.
- U-profile. Designed for installation around the perimeter of the room and fixing the ends of the panels. Some manufacturers produce a U-shaped profile with perforations for wall mounting.
- H profile. Designed to connect the ends of the panels when they are double (or more) laid along the length.
- Installation instructions from the manufacturer.
To close the gaps between the panels of closed ceilings, a "layout" profile is required. Otherwise, it is called "insert". This element of the ceiling can be considered decorative. You can buy panels in one color, and layouts in another. But even single-color inserts will provide a spectacular play of light and shadow on the ceiling.
In addition to layouts, suspensions are not included in the standard package. They are necessary to regulate the level of the suspended ceiling in the event that the base surface has significant height differences or other flaws. You can also buy a corner perimeter profile, which is used to decorate joints.
Standard kits are packed in boxes equipped with a plastic handle. The CESAL manufacturer, taking care of the customers, informs them about the contents of the box by attaching a panel sample to its handle.
Design of slatted ceilings
Currently, depending on the shape of the slats and inserts, the standard classification of the design of slatted ceilings has been adopted:
- French (S-design);
- German;
- design.
Three companies produce slatted ceilings with a French design: Albes, Alconplas and CESAL. These designs are distinguished by the rounded shape of the panels, the width of which is 100 or 150 mm, the thickness is 0.5 mm. Such ceilings are open and closed. In the first case, inserts with a width of 25 mm are included in the package.
Slatted ceilings of German design are distinguished by a strict geometry of forms. Panels of this type have a rectangular edge profile, which gives the ceiling a concise look. These models can also be either open or closed. Designer ceilings are made to order according to the technical specifications provided by the customer.
Installation of a rack ceiling in the hallway
Tools for the job:
- tape measure and marker;
- level;
- metal scissors or a grinder with a thin metal disk (required for cutting panels into strips of a certain length);
- a drill and a drill corresponding to the material from which the walls are built;
- a hammer.
Step 1. Determination of the ceiling level. If the base ceiling is even, the U-profile can be attached directly to the corner joints of the walls. But in this case, you need to make sure that the height of the walls is the same. This can be done with a tape measure. But in apartment buildings, the correct geometry of the room is a rarity, so the rack ceiling is often installed on suspensions that allow you to adjust the height of the structure.
To determine the height of a false ceiling, a self-leveling laser level is most convenient. When using it, no measurements are required. The level shows the horizontal with a red line, focusing on which, you can proceed to fix the U-shaped profile around the perimeter of the room.
Applying markings for mounting a ceiling made of plasterboard using a laser plane builder
If there is no such device at hand, the false ceiling level is beaten off “the old fashioned way”, using a tape measure, marker, thread and bubble level.
When beating a line in this way:
Determining the offset from the base surface and the length of the screws that are used to align the stringers (guides):
- a built-in lamp (on its side) and a suspension are alternately placed on the table;
- the suspension should be 0.5-1 cm longer than the lamp body;
- select the length of the screws (it should exceed the height of the lamp by 0.7-1 cm, taking into account the fact that the head of the screw will go into the recess on the stringer.
Step 2 Installation of a U-shaped profile. Instead of a U-shaped profile, you can use an aluminum corner.
Step 3 Stringer installation. The load of the suspended rack ceiling falls not on the U-shaped profile, but on the stringers. If the room is large, these guides may not be long enough. Therefore, you need to build them up.
They do it like this:
- impose one stringer on the other so that their recesses for fixing the panels are fully aligned;
- connect both strips using metal screws.
To ensure the rigidity of the suspended ceiling, it is installed on stringers located at a distance of at least 70 cm from each other. Side guides should be at a distance of 1-2 cm from the walls of the room. If necessary, hangers are attached to the base surface by the method indicated in step No. 2.
Prices for decorative plaster
decorative plaster
Two methods are used to level stringers.
- Threads are pulled between opposite U-shaped profiles.
- Attach the stringers with self-tapping screws to the base surface. This method is convenient in the presence of a wooden base ceiling. Screwing and unscrewing the screws, adjust the height of the stringers.
Step 4 Installation of wiring and installation of fixtures.
Step 5 Panel installation.
- One end of the rail is inserted into a U-shaped profile.
- Having slightly shifted the panel diagonally, its second end is inserted into a U-shaped profile located on the opposite wall.
- Slide the rail so that it is under the notch of the stringer.
- Raise the panel and press it against the stringer so that it snaps into place with a characteristic sound.
- Install the next panel in the same way.
- If the rail is located under the installation site of the lamp, appropriate markings are made on it and a hole is drilled using a crown of the required diameter (it is important not to deviate from the markings and not scratch the surface of the panel during drilling).
- After installing the rail, the lamp body is attached to it.
Step 6 Installation of the last rail. If the last rail does not fit in full size, it is cut along the entire length with metal scissors.
Sequence of work:
- using a pencil, level or rule, draw a straight line along the rail;
- with scissors for metal, side cuts are made to the drawn line (the cuts must be perpendicular to the markup);
- cut off the incised part along the line with metal scissors.
Step 7 Installation of layouts (plug-in strips). The layouts are slightly compressed and inserted into the gaps between the rails so that they snap into place. These planks not only decorate the ceiling, but also make it more durable.
glass ceiling prices
glass ceiling
Upon completion of the installation, check the performance of the fixtures. If necessary, remove dust and stains from the ceiling with a damp cloth.
Video - Do-it-yourself installation of a rack false ceiling
Do-it-yourself repair gives the owner a special peace and pleasure. Having done all the work on your own, you will not be afraid to make adjustments to the repair and spend money on the work of specialists, which in our time is not cheap. And below you will learn how to repair the ceiling in the corridor with your own hands, as well as see photos and videos of the most important processes.
Each room in an apartment or house has a certain role, which is especially important, but the central room, which always attracts special attention, is the corridor. In it, we get rid of shoes, outerwear, leave hats, umbrellas in the same place.
It is important that there is nothing superfluous in the corridor, nothing should interfere, furniture, every thing, accessories should carry certain functions and in no case clutter up the space. By finishing, the room needs to be enlarged, to create comfort in spacious corridors, not to be afraid to use non-standard rooms. The design of the hallway should form a general impression of the apartment or house.
Repairs in the hallway play an important role, while in other rooms all surface finishing work has been completed and all furniture has been arranged. Experts advise not to neglect this rule in order to exclude the possibility of damage to the floor and wall cladding in the corridor.
Do-it-yourself ceiling repair in the corridor: photos and points to consider
In most cases, hallways are cramped and small, with no natural light sources. Dirt is regularly brought into the hallway, and people often walk on stilettos, or even on skates, on the floor. Weights are often placed on the floor, sometimes angular and hard. Spray from clothes, umbrellas, pets shaking themselves off the walls.
Cold air from the opened door can break into the corridor, and the humidity in it grows significantly. Condensation is not visible to the eye, but it will remain in the pores and crevices of the finish and will gradually collapse, leading to rot, mold and all possible infection.
But every owner wants to have a cozy, bright and clean corridor, and not a dark, gloomy passage that spoils the guests and their mood. This is quite realistic to achieve if repairs are carried out strictly according to plan, following the sequence of work and understanding the intricacies of the case, especially in terms of the choice of materials.
Do-it-yourself corridor ceiling repair: photos and features of the choice of materials
Before you start repairing the ceiling in the corridor, first of all, you need to find out its type of finish. Of all the variety that we will consider below, whitewashing and painting the ceiling remains the cheapest and easiest way. If you need to do something more elegant, consider making the ceiling out of hinged panels or drywall.
The ceiling in the corridor gives the whole room completeness and determines the subsequent design of the room. When developing the idea of a corridor, designers rely on the height of the ceiling, its configuration and dimensions. Ceiling decoration directly depends on the purpose of the room - office or corridor in a residential apartment, etc.
A well-chosen material and thoughtful design of the ceiling of the corridor can significantly change the appearance of the room, reduce or increase it in size.Ways to visually resize
One lamp from above and a high ceiling in a narrow corridor can make the room look higher, but it looks more like a tunnel. There are two ways to solve this problem:
- make the ceiling slightly darker (by a tone or several tones) than the predominant color in the corridor;
- install the lamp on the side of the wall.
Also, the option with a lamp will help to make the room visually lighter, which is very important, since the corridor is a space that does not have natural light sources. Conversely, the ceiling in a small corridor can visually make the room taller by using a glossy design (plastic panels, glossy paint or glossy stretch ceiling).
What type of ceiling to choose for the corridor?
The design of the ceilings in the corridor is developed from the choice of the optimal type of ceiling. In doing so, it is important to consider the following factors:
- configuration and height of the room;
- the presence of temperature differences;
- humidity level;
- the main idea of the design of the room, etc.
When choosing how to finish the ceiling, you need to pay attention, first of all, to its practicality and durability.
What types of ceilings can be used in the corridor?The main types of ceilings that are popular with both builders and designers, and consumers:
- painting with paint;
- suspended ceilings, which are divided into suspended (from mineral fiber, plasterboard, slatted and lattice) and stretch;
- ceiling made of plastic panels.
Due to the structure of the room, the features of installation and the performance shown by these types of materials, plastic or suspended ceilings are increasingly being installed.
Suitable Types of Suspended Ceilings for the Corridor
Suspended ceilings can be of 2 types - stretch and suspended. It is very problematic to install the first ones on your own, since the installation process will require certain skills and specialized equipment. For this reason, most consumers choose suspended ceilings, the installation of which will not cause difficulties.
Suspended ceiling is one of the most popular finishing materials in our time. There is an opinion that only a professional can install it in the corridor, but this is not so. Subject to the technology and the availability of the necessary equipment, installation can be done on your own.
The first thing you need to install a false ceiling is a set of tools:
- metal profiles;
- ceiling panels;
- fittings (dowels, screws, self-tapping screws);
- pliers;
- level;
- wooden scaffolds;
- screwdriver
Before you install a false ceiling in the corridor with your own hands, you need to do the preparatory work:
- clean off the old coating;
- securely fix the wires of the electrical wiring with special ties;
- cables and other communications by marking the surface of the ceiling.
Before fixing the profiles, you need to check if there are unaccounted pipes with communications, otherwise during installation you risk damaging them with self-tapping screws or tools.
At the next stage, fix the corner profiles around the perimeter of the room using 100 mm screws. This is quite simple to do with a frame wall - the screws are screwed directly into the racks. With a concrete or stone wall it will be much more difficult. In this case, you will need to pre-drill the holes for the dowels and nail them. After that, you can begin to unscrew the screws.Next is the installation of the basis for the future frame. To do this, make markings on the surface of the ceiling. Based on it, drill 6 mm holes in the bearing base to a depth of 40-60 mm. If the base is wooden, then installing the frame base involves the use of large-threaded self-tapping screws that do not require pre-drilling.
Then it is worth checking that the distance along the corner profiles that were previously fixed to the walls corresponds to the length of the profile. How to take the necessary measurements? To do this, it is enough to use an ordinary roulette wheel. The dimensions obtained after measurements should be used to saw off the necessary part from the transverse profile of the required size. In order to install a transverse profile, it must be supported on the corner ones.
The next stage - the assembly of cells, thanks to which the tile is held, begins with fixing the profiles along the corner guides. All of them have their own mounting system, which greatly simplifies their installation. At the end of the profile rail there is a “petal”, which must be bent in the right direction. If you do everything right, a click will occur.
Installing the cells holding the profile
- So that the canvas does not sag in the center, a transverse profile is attached to the old ceiling or beams (using special suspensions). Mounting holes are provided in the profile rails. Then the upper suspension loop should be tightened 90 degrees.
- The loop, after performing such procedures, must be attached to the ceiling and secured using a screwdriver and self-tapping screws.
- The last stage is the completion of the installation of the cell and the laying of the transverse panels in the already formed cells.
How are the panels stacked in the cells?
The first sheet is installed in the central part of the room and gradually moves from it to the edges. If gypsum boards are used for installation, then at the end they will need grinding and putty. To hide the gaps between the wall and the ceiling, acrylic is used, and gypsum putty is used between the plates.
For some time after installation, the smell of finishing materials may remain. But if you use high-quality materials, then it disappears in a few hours. Perfume is a sign of low-quality materials.
Common and inexpensive methods for finishing ceilings in the corridor
Today, the construction market offers a huge number of various building technologies that can be used in the arrangement of the ceiling. Consider the most popular of them to see their advantages and differences.
- Whitewash.
If you are looking for a simple and economical solution for hallway ceilings, then whitewashing is the perfect option. It is resistant and durable to various pollution. But to whitewash the ceiling, you need to do the preparatory work. This includes putty, plaster and ceiling polishing. All of them are performed for the same purpose - to eliminate irregularities.
Attention! Whitewashing the ceiling is considered a long-obsolete method, since it requires serious labor costs. Although the cheapness of this technology captivates many people when carrying out budget repairs.
- Painting.
Painting also refers to simple finishes. In both cases, the ceiling is preliminarily plastered, puttyed and sanded. You will have to apply several layers of putty, consisting of a starter and a finisher.
Attention! The painted ceiling implies paying special attention during the preparatory work. The paint focuses on all the differences in the surface and irregularities. For this reason, it is recommended to hide defects and flaws in the ceiling in advance.
If we consider the advantages of painting, then this saves space, especially when the ceiling is quite low. At the same time, you have the opportunity to save money, because, unlike other technologies, it will be cheaper.
- Decorative plaster.
This method of processing the ceiling has its own advantages, in contrast to those listed above. The base of the ceiling does not need to be carefully puttied. Thanks to decorative plaster, surface imperfections can be hidden. As a result, with minimal physical effort, you can create an aesthetically pleasing ceiling.
It should be noted that the process of preparing decorative plaster for application is very simple. First, a decorative mixture must be applied to the surface. Then, using a grater, spatula, sponge or other tool, make waves, lines, divorces, furrows and other relief that you like. With this finish, you have the opportunity to show imagination, since there are no patterns in this regard. As soon as the decorative plaster dries completely, it remains only to paint it. Moreover, it is possible to do this in two colors.
- Wallpaper.
The traditional ceiling technology in the corridor is wallpaper. Depending on their cost, repairs can be economical or expensive.
If you often change the situation, then, for sure, you will be interested in wallpaper for painting. This option will be the most practical among those described above. The cheapest will be paper-based wallpaper, but they are not so durable and attractive.
- Styrofoam boards.
With this design, plates of 500x500 mm are used. Among the budget options for finishing the ceiling, this technology is the most common and popular. For their gluing, special preparation of the ceiling is not required. In addition, all work can be done by hand.
Attention! Due to the high density of the material, it is not necessary to putty the surface at all - just remove the previous coating and thoroughly clean it from all kinds of contaminants.
The gluing of polystyrene foam boards is quite simple. You need to apply special glue to the product and press the plate to the ceiling. Within a few hours, the ceiling in the corridor will be completely transformed.
Do-it-yourself corridor ceiling repair: photos and features of the room
Hallway lighting should be as close to shadowless as possible, in addition to some specific individual wishes. Otherwise, subsequent efforts to organize the space simply come to naught, and the cramped room will seem even smaller. The surfaces of a small hallway should be created by texture and tone, and not by the play of chiaroscuro, since there is not enough space for it anyway. That is, the ceiling should act as a source of diffused light and seem to dissolve in it. Based on this, it is worth starting from the design of the ceiling.
In the hallways, a sliding or mirrored ceiling made of a shiny film would be more appropriate, provided that the color is maintained correctly. With low ceilings, a shiny stretch ceiling will fit into a “box”, but for a narrow winding corridor, or “burrow”, this option should not be considered: a person in such a room will see himself either in a glacial crack, or at the bottom of a well.Optimal in terms of costs, labor, effect created and options for subsequent design - a two- or multi-level plasterboard ceiling. When installing it, give preference to curved surfaces: an association with clouds arises and the hallway seems to expand. Moreover, a two-level ceiling allows you to place a minimum number of fixtures (which consume electricity and cost a lot of money) to obtain the desired lighting effect.
How can you achieve shadowless light? When performing repairs on your own with minimal cost and budget, you can use the following most effective methods:
- for a perfectly even ceiling - linear fluorescent lamps under the ceiling, behind the cornices or open. A few 13-16 watt lamps near opposite walls are enough for a “box”; in total - 50-60 watts;
- for a plasterboard ceiling - an oval niche with lamps glowing across each other on the walls at a slight angle with respect to the ceiling surface.
Attention! A common option for corridor lighting is sconces that shine on the ceiling, which are quite expensive (decorative lamps require quite a lot of power), insufficient reflection of light from the ceiling, and deep intersecting shadows below, so additional light will be needed to expand the hallway.
Do-it-yourself ceiling repair in the hallway: fixing a chandelier to a false ceiling
A chandelier is an essential element in the hallway. What should be the lighting so that it hides minor defects in the room? There are several effective options:
- built-in lamps - they are mounted directly on the walls, thereby creating an illumination effect, and they are used as an addition to the main lighting, but in small corridors they can be used as the main light source;
Attention! When choosing a chandelier model, you should pay attention to those in which the lamps are inside the ceiling. This arrangement will help to avoid the appearance of dark spots on the ceiling.
Fixing the chandelier to the ceiling can be done in two ways:
- ceiling hook - the most reliable. The hook is securely mounted in a concrete wall. It is better to install it even before repair. If it is completed, then anchor hooks can be used. The “glass” of the chandelier itself, at the end of the installation, is sealed in the ceiling canvas without gaps.
Do-it-yourself ceiling repair in the corridor is technically simple, but requires the development of a design and the selection of suitable finishing materials.
When planning repairs, it is worth remembering the hallway, often one of the smallest rooms in the apartment.
Very often the problem arises: how best to finish the flow in the hallway?
When answering this question, it is important to remember the role of design: it is able to hide obvious flaws and give the hallway style and attractiveness.
For low ceilings, it is best to use light-colored materials that are ideal for the same light walls and darker floors.
This technique will help to slightly increase the height of the ceiling. In the case when the ceiling, on the contrary, is higher and I would like to make it visually lower, it is worth resorting to the dark colors of the ceiling in the hallway - they will make the room lower and more harmonious.
This color version of the ceiling will harmoniously fit into a narrow hallway.
You can think about the use of materials with a pattern, but in this case it is important to choose the right one for the overall interior and room parameters.
Ceiling finishes in the hallway.
To date, there are various options for finishing the ceiling in the hallway, which can be seen in the presented photos.
The use of whitewash
This method is recognized as the most economical and least troublesome. Before whitewashing the ceiling, it is important to plaster the surface in order to correct possible irregularities.
Some believe that the use of plaster is a technique of bygone years, but in the case of a limited budget, it becomes the most digestible solution.
Using ceiling paint
This is another easy way to give your ceiling a unique design.
Be sure to carefully treat the ceiling before painting: putty and plaster, as the paint is able to emphasize all the defects of the surface on which it is applied.
That is why it is worth taking care in advance that the surface is as even and smooth as possible.
Painting with texture roller
The use of decorative plaster is becoming more and more popular in today's building industry.
The ceiling should be leveled beforehand, but the quality of the surface on which the decorative plaster will be applied does not matter much. The relief, which is created by decorative plaster, smooths out all the bumps and roughness.
It is for ease of use and minimal preparatory work that many love this type of finish so much.
Wallpapering the ceiling
This type of ceiling decoration can dramatically change the space. The economic component depends on the quality and price of the selected material.
Ceiling tiles
A fairly common option for finishing the ceiling in the living room.
The surface does not require any special preparation, and the material from which the tile is made allows you to quickly fix it on the ceiling surface.
This type of ceiling decoration is ideal in a small hallway.
Stretch ceilings in the hallway
This type of ceiling decoration can radically change the room.
However, it is quite difficult to independently perform such a finishing option without certain skills. That is why the whole procedure should be entrusted to the masters.
The material from which the stretch ceiling is subsequently obtained is a sheet of elastic polyvinyl chloride, which must be fixed at some distance from the ceilings between the walls of the room.
First of all, special clamps are attached. Then, using tools (a plastic spatula, for example), it is necessary to bring all the edges of the canvas into the holes of all the clamps without exception.
Today, the design of the stretch ceiling in the hallway can be either glossy or matte. Stretch ceiling looks very stylish and beautiful. Its only drawback is the rather high cost.
Plasterboard ceilings in the hallway
Plasterboard ceilings are often also called suspended ceilings. In fact, they are a separate structure, which is fixed to the ceiling with the help of special fasteners.
After installing such a ceiling, the surface must be treated with putty and painted.
If plastic served as the material for the false ceiling, then it will not require any additional finishing work in the future.
Photo design options for the ceiling in the hallway
The entrance hall is a room that meets and escorts us every day at the exit from the house. There should be a high-quality, stylish and practical finish, and this applies to all surfaces without exception, including the ceiling.
Simple options: painting, plastering, pasting
All these types of finishes have one thing in common - they require surface preparation, its careful leveling. Otherwise, it will be impossible to talk about the quality and style of design.
Stylish ceiling design in the hallway
Whitewash
The most affordable in terms of cost, light and somewhat old-fashioned option. In this case, the ceiling is plastered, leveled, and then whitewashed. It turns out a smooth white surface - a good option if the budget for repairs is limited, but not suitable for design delights.
Instead of whitewashing, staining is now used
Coloring
Ceiling painting is another budget method that also requires surface leveling. But here the quantity is more extensive, since you can use ordinary paint that forms a smooth surface, or you can give preference to texture paint, thanks to which the ceiling will acquire an expressive texture.
Important. Among the advantages of staining is a huge selection of pigments and shades. You can choose a material that perfectly matches the wallpaper, furniture fronts or the surface of interior doors. Even if there is no suitable option among the ready-made paints, you can turn to colorists and use carefully selected pigments to get the desired tone.
Painting - a simple and practical option for finishing the ceiling in the hallway
The paint is applied only on a carefully puttied ceiling, smooth, without cracks and protrusions. Even a thick layer of coating will not hide obvious defects, but will only aggravate them.
Decorative plaster
An interesting way to finish the ceiling in the hallway, quite easy to implement. In order to create this textured coating, you will first need to repair and plaster the base, and then apply another plaster layer, which will be molded to provide the required relief. Forming is carried out on an uncured solution, using metal and wood graters, a spatula or a sponge.
Decorative plaster on the ceiling in the hallway
Decorative plaster can be performed standard, without pigment. Then the surface is painted in the desired tone after receiving the relief. But you can use the colored mixture right away - then the pigment is added even at the stage of solution formation.
Wall and ceiling decoration in the hallway with decorative plaster
An interesting effect can be obtained using two compositions with pigments of different tones - one is performed as a background, and the second, on which there will be protrusions, is brighter.
Wallpaper
Wallpapering also belongs to the standard methods of decorating ceiling surfaces. Among the advantages of such coatings are ease of gluing and variable design. In modern collections, it will not be difficult to find a suitable decor - textured, monochrome or patterned. Often, coatings from the same series are chosen for the ceiling as for the walls.
Wallpapering the ceiling in the hallway
But you should not count on the durability of such a decor - it is difficult to wash the wallpaper on the ceiling, so they quickly become unusable.
PVC tiles
These are small PVC modules that are glued to a pre-plastered ceiling. This finish is considered economical and practical. Among the advantages of this material are budget and ease of installation, but there are also disadvantages. So, it is difficult to call this material refined and elegant. So if seasoned style is important to you, you should give preference to another type of coating.
PVC ceiling tiles
Dropped ceilings
Suspended ceilings are a kind of classic in living spaces. They are mounted very often, even despite the fact that such a design "eats" up to 15 cm in height. But it is worth using several levels and choosing their shape correctly, as the room is transformed, it becomes larger and higher.
Multi-level false ceiling with built-in lights
Plasterboard ceilings
Most often, suspended ceilings involve the use of drywall. It is mounted on a pre-made frame of guides.
Important. Even at the stage of creating the frame, it is planned to lay out electrical wires for spot lighting. After that, plasterboard sheets are mounted, fixtures are installed, then the seams between the sheets are sealed, and the entire surface is puttied. we will consider in a separate article.
Multi-level plasterboard ceiling
Among the advantages of drywall:
- strength;
- moisture resistance;
- ecological cleanliness;
- fire-fighting properties;
- light weight, which makes installation quite easy and fast;
- the material is quite flexible, which means it can take any shape.
This form of plasterboard ceiling construction is called the "river"
In addition, drywall does not require careful preparation of the base, its alignment, and so on. Behind the sheets attached to the frame, you can hide ventilation systems, electrical cables, and so on. You can even carry out local repairs if necessary, replacing the damaged section of the structure.
Complicated drywall construction with swivel spots on the bar
The created plasterboard ceiling can be pasted over, painted, illuminated with LED strips. Two- or three-level structures are ideal for zoning, but they are only advisable in large square hallways or in irregularly shaped rooms.
Use of plastic modules
Suspended ceilings also include plastic structures. Some do not like this finish because of its too "office" appearance, and some choose it for practicality and affordability. Plastic is economical and easy to clean - all dirt from its surface can be washed with a regular sponge with detergent or even a mop.
Ceiling made of plastic panels
It is interesting that today manufacturers are striving to produce a variety of designs of plastic panels - among them are both classic white, cream and delicate watercolor shades with slight overflows similar to marble, as well as bold modern solutions - for example, mirror, glossy, exactly imitating crumpled fabric, leather, metal or natural stone.
rack ceiling
This type of construction is not often found in residential apartments, but it is very popular in private homes. We are talking about rather thin aluminum rails with a coating. They are assembled in almost the same way as plastic structures, but they are distinguished by a more expressive design - these are chrome, gold or bronze surfaces. Naturally, they are far from suitable for all styles - for example, in aristocratic classicism or romantic Provence they will be out of place.
Aluminum slatted ceiling
Wood
Natural wood is also not a frequent guest in the decoration of our houses, especially when it comes to the ceiling in the hallway. However, sustainable trends dictate their direction - and for styles with the prefix "eco" there is no better solution.
Natural wood ceiling
It should be borne in mind that wood always does not tolerate high humidity. Therefore, surfaces must be treated with special impregnations, and they will need to be periodically restored.
Video: plastic panel ceilings in the hallway
Loading...