How to hide pipes in a bathroom. Finishing the toilet with plastic panels: preparatory work and a step-by-step do-it-yourself finishing process. What you need to know before you start

It is difficult to disagree with the fact that communications in the bathroom are not the most pleasant sight. No matter how expensive pipes with valves are, they can only decorate a specific loft-type interior. If you are not an industrial design enthusiast, then there is a strong desire to hide these networks, right?

We propose to consider several options for how to close the pipes in the toilet, leaving access for regular and emergency maintenance. The article describes in detail the technical nuances and ways to implement interesting ideas. The text is complemented by useful visual applications and video tutorials.

The issue of masking pipes concerns both budget housing and luxury apartments. The difference lies in the ways of terminating communications, which are largely determined.

If in a 15-meter combined bathroom it is possible to sew up all the walls with false panels, then every centimeter is important on a 2 m² patch. Often, after repair, the interior of the toilet often takes on unthinkable forms.

In a typical housing, everything is simple: in the corner of the room there is a common sewer riser, pipes of centralized water supply are installed parallel to it. They are connected to intra-apartment communications from pipes of smaller diameter. Thus, both the vertical riser and the horizontally laid branches need to be masked.

The simplest layout of sewer pipes and plumbing in the toilet. The best option for hiding communications is the construction of two boxes (along the riser and behind the toilet), occupying a minimum of usable space

Difficulties arise when, instead of a pair of branches, you have to hide water meters that require regular access, filters, collectors, etc.

Simple boxes are indispensable here, you have to attach partitions to the load-bearing walls or build structures that resemble screens.

The collector, meters and filters are located above the toilet and occupy almost the entire wall opposite the entrance to the toilet. The best way to close the wiring and appliances is to build a plumbing cabinet with wide doors or use blinds.

In a private house, everything is easier if you take care of masking communications even before the project is implemented. Part of the pipes can be hidden in the walls, and technical hatches can be created for important nodes. Filters are installed in a specially designated room - along with a pump and other equipment responsible for the water supply of the house.

In high-rise buildings, no one will allow chasing walls under pipes, and the characteristics of the walls are not suitable for, albeit partial, but destruction. It remains the exterior decor, with the options of which we will get to know better.

Ways to mask communications

The choice of method depends on several factors: the size and direction of pipelines, their location relative to each other, the presence of additional devices, etc.

How to hide sewer and water pipes in the toilet is also influenced by interior design features. For example, blinds do not go well with classics, but they are suitable for minimalism. The choice is up to the homeowners, and a description of how to mask the pipes is below.

#1: Plastic panel box

Despite some difficulties in building structures on a frame, even beginners boldly take on. Their decision is quite understandable: saving the family budget and the availability of photo and video installation instructions.

What is the difference between drywall and plastic boxes? The difference is fundamental: in the first case, you create the basis for further decoration, in the second, you immediately get the finished product. Therefore, it is easier, cheaper and faster to create boxes from plastic panels.

However, this is only possible if the walls in the toilet are also lined with plastic of the same type or, in extreme cases, painted in the color of the panels.

One of the best options for using plastic is nothing more. All walls are fully lined with white plastic panels, while instead of boxes covering pipes, a false wall with a hatch for utility services has been erected

Instructions for installing a plastic box:

Checking the performance of communications. It is necessary in order to provide for the repair of pipes, which is usually accompanied by a dismantling of structures. The main task is to check the connections, nodes, operability of devices.
Wall and ceiling treatment. Produced with an antiseptic solution to prevent the appearance and fungus. An enclosed space with a high level of humidity and insufficient ventilation is a risk zone.
Creation of a crate. It is carried out on all walls or in communication zones. If you need a box to mask the riser - the construction of the frame. For this, both wooden slats (bars) and a metal profile designed for drywall are suitable.
Installation of plastic panels. The set of parts is fast, the main thing is to fix each in its place. Small nails are used for fastening. Small gaps at the joints and in the corners can be covered with special decorative strips or liners.

For decor, it is better to purchase a finished model. It is advisable to install a larger model so that it is more convenient to service the devices.

If the installation of a toilet paper holder is planned, at the stage of building the frame, it is necessary to attach a mortgage to the right place - a wooden block.

#2: Drywall Construction on Frame

The first stage is preparatory. Materials must be purchased in advance, and you should also choose a tool for work.

For cutting a metal profile, you will need scissors for metal, for cutting wooden parts - a hacksaw or a jigsaw. You also need a puncher and a screwdriver to fix the parts on the wall with dowels and screws. Wood processing is carried out with a brush.

Mandatory elements for the construction of the structure:

Image Gallery

When thinking about a major renovation project in a toilet, you have to solve many different problems - from global to very minor. One of the most significant problems is the masking of plumbing communications. The builder will have to find a middle ground between attractive appearance and ease of construction.

On the one hand, the owners want the pipes to be completely hidden from view (unless, of course, we are talking about loft-style repairs), and on the other hand, it is very important to provide trouble-free access to plumbing units, because the need for urgent repairs sometimes arises unexpectedly .

In search of the best solution to the problem, repairmen and manufacturers of finishing materials have come up with several ways to mask water and sewer pipes. In this article we will talk about the most popular options, from which you can choose the one that seems to you the most successful.

Decoration materials

You can close plumbing connections in the toilet using various building and finishing materials, as well as special equipment. Read more about each option below.

Drywall

Drywall is considered one of the most affordable and convenient materials that are used in construction and repair. It is used for a variety of needs, including sewing up pipes in the bathroom. The advantages of drywall are:

health safety;
convenience in work and operation;
the possibility of quick dismantling;
relatively low price;
the possibility of installing doors and other structural elements;
availability of various finishes.

PVC panels

Plastic panels (it would be more correct to say from polyvinyl chloride) solve two problems at the same time: they block pipes and make the resulting structure more aesthetic. On sale you can easily find PVC panels that look no less aesthetically pleasing than ceramic tiles. Other advantages of plastic panels include:

quick and easy installation;
low cost;
the ability to make a design that, if necessary, can be disassembled;
a large selection of colors and textures;
no need for decorative trim;
resistance to moisture and temperature changes.

box

Drywall and PVC panels are used to mask pipes in the toilet in the same way - they make a box into which communications are hidden. Drywall sheets or plastic panels are mounted on the frame. The frame for these materials needs a different one, but the principles for installing the box are very similar. It should be possible to access the most important structural elements - for repair and maintenance work.

It should be borne in mind that the drywall box will need finishing - as a rule, the drywall construction is lined with ceramic tiles, but you can get by with simple painting.

Plumbing cabinet

Another type of structure that allows you to seal pipes in the toilet is a plumbing cabinet. It differs from the box by the obligatory presence of large doors and built-in shelves that can be used to store household items. You can make a sanitary cabinet yourself from ordinary furniture facades, purchase a ready-made one, or order an individual project from a company that manufactures furniture for bathrooms.

roller shutters

Plumbing shutters have become widespread relatively recently. They are a mobile structure consisting of a base frame and dozens of narrow panels, which, if necessary, are assembled into a roll, providing access to the pipes. Roller shutters for the toilet are made of materials that are not afraid of moisture. You can control this device using buttons or remotely using the remote control.

On sale you can find sanitary roller shutters of different colors, including those decorated with drawings and ornaments.

Blinds

An option for masking pipes in a bathroom, very similar to the previous one, is plumbing blinds. Roller shutters, in essence, are a later, modified type of blinds. The latter are much simpler - the design does not provide for a frame, and only mechanical control is possible. Blinds are made mainly of plastic, so they are moisture resistant, but not very durable.

improvised materials

You can also decorate unsightly plumbing and sewer pipes with the help of improvised means. What materials to use - depends only on your imagination. Here are some of the most interesting and easily implemented ideas:

paint the pipes in a bright color or draw patterns on them;
disguise pipes as trees, turning the toilet into a forest or jungle;
wrap the pipes with twine or braid;
use artificial plants for decoration;
paste over the pipes with decorative stones;
Decorate pipes with special stickers and stickers for home decor.

Sheathing methods

So, in order to sew up communications in the toilet, you can use one of the two most suitable materials for this: drywall or plastic panels. We have compiled for you brief instructions for the construction of pipe fences.

How to block pipes with a false plasterboard wall?

First you need to stock up on tools and materials for work. To build a drywall box, we need:

the required number of drywall sheets;
metal profiles and guides;
roulette;
a hammer;
building level;
perforator and screwdriver;
hacksaw and scissors for metal;
self-tapping screws;
dowel-nails.

The first step is to draw the layout of the future box on the floor and on the walls. Profiles and guides will be laid along it, so it is very important to measure everything accurately. When calculating the dimensions of the box, do not forget to take into account the thickness of the finishing materials (in our case, ceramic tiles).
Further, in accordance with the calculations made, we cut the metal profile into several parts of the required length. With the help of dowel-nails, we fasten the sections of the profile according to the markup.
Now we cut out the details from the drywall sheet that will serve as the sides of our box. We fasten the profile to the drywall blanks with self-tapping screws. We insert the resulting structure into the frame assembled in the previous paragraph.
We cut the ceiling profile into several parts equal to the width of the box, and install them as jumpers. We close the front of the box with drywall.
At the final stage, we bring our design “to mind”: we strengthen the joints between the plasterboard sheets, putty, mount the protective corners. Lastly, we apply a decorative coating - paint the box or tile it.

How to block pipes with plastic panels?

The set of tools and materials needed to build a plastic panel box is very similar to the one we used in the previous section. The only difference is in the following points:

PVC panels;
metal ud- and cd-profiles;
silicone-based sealant;
plastic plinth;
cutter or sharp knife.

First, we mount the frame. We do everything in almost the same way as in the case of drywall profiles: we draw the markup, cut the profiles, fasten them to dowels or self-tapping screws. In advance, in the right places, we install crossbars-jumpers that will be located between the panels.
Now let's move on to paneling the frame. First of all, we mount the starting profile and fix the first panel on it with self-tapping screws. We alternately set the required number of panels, attaching each subsequent one to the previous one. To install the last panel, use the start profile.
Armed with a knife or cutter, we cut holes in the right places for installing doors. In places where the panels are joined, we fasten a plastic plinth.

Which option to choose: close the pipes with roller shutters, hide them behind blinds, sew them up with drywall or close them up with plastic panels? The decision will largely depend on what financial resources you have. The most budget options are blinds and PVC panels.

Masking with drywall requires tiling the structure, and plumbing shutters are not cheap in themselves, just like custom-made plumbing cabinets.

What needs to be done before installation?

Whichever way you choose to mask the pipes in the toilet, before blocking them completely, make sure that all elements of plumbing communications are in good condition and repairs will not be needed soon. It is also recommended to take the following preventive measures:

if possible and if necessary, replace the old parts of the system with new ones;
make sure that there is no danger of leaks in the near future;
check the condition of water and sewer pipes;
seal all joints and connections.

Toilet space is limited. The piling up of communications makes the already small space heavier.

Even beautiful tiles are lost against the background of pipes. Many owners prefer to hide unsightly elements from prying eyes.

The range of building materials allows you to choose options for any budget. Next, consider the most common ways to close the pipes in the toilet and get acquainted with the photo designs.

Material requirements

The toilet is a room with a specific microclimate. Therefore, before you hide the pipes in the toilet, decide on the material.

It must meet such important criteria as:

Moisture resistance. There is constant condensation in the toilet. Water droplets settle on surfaces. Over time, unstable products begin to soak, fungus and mold appear. Therefore, wiring should be sealed with products that are resistant to high humidity.
Strength. You constantly need access to meters and ball valves. For this, special hatches are installed - they will not withstand them with a fragile structure.
Aesthetics. Another important criterion. It is better if the product is combined with the overall finish of the toilet.

Close the pipes in the toilet with plastic panels - instructions

The thickness of the lining usually does not exceed 1 cm. Its width varies from 15 to 50 cm. The standard length is three meters. The most common size is 20-37 cm.

An extensive range of colors makes it easy to make a choice for a specific design solution.

To decorate the fasteners of the lining around the perimeter or in the docking areas and corner parts, moldings of various shapes are used. They are painted white, and they are perfectly combined with any color scheme.

To install the lining, you do not need to have a lot of tools (which will be needed, read below), the usual ones are enough for finishing metal and wood.

By heating the panels are given any shape. They are well bonded with glue and welded. They can sew up the wall at any angle of inclination. If the box is made and sheathed correctly, then the presence of the pipeline will be invisible to others.

It has already been said above that a wooden beam for a room such as a bathroom or toilet is not a good choice. Since the room is damp, which will have a negative effect on the wood. Even with protective solutions, the desired protection indicator is not achieved.

Modern production offers a wide variety of galvanized steel profiles and fasteners for them. To hide the pipes in the bathroom or toilet take a special profile. Its standard length is 3 - 4 meters. The transverse dimensions are 20 x 20 mm. But they can be more.

Features of work

At first glance, it seems that it is not difficult to close the pipes with a plastic clapboard. But many, starting this work, do not always have a clear idea about it. Namely:

Before you hide the pipes, you need to check their condition. It may be that they need a replacement. And such a problem should be solved before starting the skin. Because an emergency situation may arise after the entire structure is assembled, and then the structure will have to be dismantled. Old steel and cast iron pipes require special inspection. These are high-strength and reliable building materials, but a careful examination may reveal cracks and chips, which soon grow into big problems.
After the issue with the pipes is finally resolved, it is necessary to accurately determine the shape of the structure that will close them.

Pipes do not take up much space. And the dimensions of the overall concealing structure depend on where the pipeline is located. After all, the riser can be located in the corner, but it happens in the middle. Wiring running horizontally is most often located close to the floor.

We must not forget about the valves, metering devices, etc., you need to make hatches to access them.

If the pipes pass in niches, then it is advised to close such places with a false wall, or to make an L-shaped structure.
Horizontally located pipes must be closed with a rectangular threshold. In the area of the sink, the threshold must be raised to its height, and the empty space must be used to equip the shelves.

When all these points are thought out, you can take care of building materials and the necessary tools.

Tools needed for sheathing:

building level;
knife (for mounting actions);
profile (starting and guide);
screwdriver and screwdriver;
panels.

It should be noted that glue in this situation is not one of the best options, because the need to disassemble the building may appear at any moment. From this point of view, it is advantageous to use self-tapping screws.

The use of plastic panels

Before you sew up the pipes in the toilet with plastic panels, you will have to construct a false wall. The instruction for its device is as follows:

execution of markings in the area of \u200b\u200bthe ceiling and floor. Fastening guide profiles to the floor and racks on the walls.

rack profiles are fixed in the corner parts of the structure;
with a half-meter indent, profiles are mounted transversely, otherwise the building will not be rigid:

frame sheathing.

The video provided details the work. Here the process is described in detail, and any novice master can cope with this task.

Having carefully studied the information provided, you can not only close the unsightly pipeline, but also create a beautiful decoration of the room.

Features of marking

First, the contour is applied on the floor. How correctly the corners are observed, you need to check with a square. After checking for accuracy, the contour can be transferred to the ceiling.

A rack profile is mounted on the corner parts of the box. Its vertical position must be checked with a building level, while a dot is placed on the ceiling, this is a projection of the contour made on the floor.

IMPORTANT! For exact matching of the mark on the ceiling and on the floor. Before marking, it is necessary to check how accurately the floor is horizontally located.

Frame installation

To sew up the pipes in the toilet with plastic panels, you can’t do without building a base. Such a design is needed not only when working with lining, but also for sheathing with other materials.

It should be noted right away that experts call a galvanized metal profile the most suitable mount for plastic lining. It provides the desired stiffness indicator, and its protective treatment saves the metal from corrosive formations.

Many, in order to close the system, take ordinary wooden bars instead. But, this option is not considered the best, because the wood should be treated with an antiseptic. Also, in this embodiment, fire safety becomes much lower.

To close the pipes in the toilet, you need to prepare a plastic crate. In this option, the panels must be mounted using special clips. But, such a frame has a big drawback, it is characterized by low rigidity.

The construction of the frame begins with fastening the profiles to the floor. Behind them are mounted racks running in a vertical direction. Transverse ribs are placed at the very end. Profiles are fastened with self-tapping screws to each other.

When working, you should carefully monitor the size of the gap between the ribs of the frame. When the plastic panels are located from the bottom - up, then the distance is approximately 60 - 80 cm. When they go transversely, it may be necessary to install an additional rack.

IMPORTANT! We must not forget the fact that a window should be left near the revision and fittings. It will be required to access the system. Its location of this window is advised to consider during the construction of the frame.

Structural paneling

To close the sewer pipe, it is necessary to strengthen the panels on the mounted base.

A starting molding is installed near the wall. It is attached to the profile with self-tapping screws. This fastener is carried out through the shelf, covered by the next plate. Thus, the head of the self-tapping screw on the plastic casing will not be noticeable.

At furniture companies, they will select a product of the required color and texture. To hide the wiring, a wooden beam is installed on the side walls of the opening. Then, with the help of hinges, doors are installed. It is possible to make a sliding structure. To save money, a cutting board is used.

Masking with chasing

Decoration techniques:

You can not hide, but simply paint. The color should be in harmony with the overall design of the bathroom.
Using stencils, original patterns are applied. A little patience - and interesting stories will appear on boring pipes.
Different pieces of glass, pebbles or ordinary sewing braid are suitable as decorative elements.
Can be braided with artificial flowers. The design will be close to eco-style.
Stickers and decals are also an option. If pasted over with newspaper or magazine clippings, they will resemble cabinets with posters. Get stylish and unusual.
Plumbing elements can be wrapped with twine or other similar elements.

The owners do not always seek to repair communications. Sometimes plumbing communications become part of the interior. Fans of high-tech or loft style will be able to appreciate this design. The most successful combination is copper plumbing and the same pipes.

The external pipeline is installed much faster. And there will be no problems with the repair. You can always replace worn parts.

Metal products need careful care. A significant disadvantage is the price. In addition, the metal heats up quickly. Contact with it can result in severe burns.

The arrangement of the bathroom requires a special approach. Materials must be durable and meet sanitary standards. There are plenty to choose from. It remains to determine your preferences. There are no strict limits. Each option is easy to recycle at your discretion. It all depends on the area of \u200b\u200bthe room and the imagination of the owner. Based on these options, it is really possible to create your own camouflage method. Dream boldly, and entrust the realization of fantasies to professionals.

Many owners of apartments or private houses face the question of how to close the sewer pipe in the toilet. It looks too technologically advanced, spoils the decoration of the room with its appearance. There are not too many options for solving the problem.

Most often, a decorative box is installed. It is finished in the general style with the design of the toilet and hides the pipes. It is important to remember that one day you may need access to a wiring or riser. Therefore, it is necessary to ensure the possibility of quick dismantling of the box. Let's consider this question in more detail.

Camouflage materials

Before you hide the sewer pipe in the toilet, you need to choose the appropriate masking method. The materials used for this must meet the following requirements:

ecological cleanliness and harmlessness. The room is small, the concentration of unwanted secretions increases very quickly;
resistance to moisture, no corrosion or other reaction;
compact, light weight design.

The following materials meet these requirements to a greater extent:

plastic panels;
MDF;
plywood;
drywall.

All sheet materials must be moisture resistant. The design of the sewer riser must maintain its appearance for a long time.

When choosing how to close the sewer pipe in the toilet, one must remember the need to repair or clean the pipes. It is not recommended to seal the wiring tightly so that later you do not have to urgently break everything. If necessary, the structure is dismantled in a predetermined order. After completion of the work, the box is put in place without re-closing the pipes with new materials. Since there are many ways to close a sewer pipe in a toilet, it is important to carefully analyze your options. You should not choose complex methods without special training, experience and skills. It is necessary to provide a decorative look, a combination with other elements of the interior. Most often, the manufacture of the box is combined with a general finish, in order to obtain the same design of all surfaces as a result.

Ideally, the box should completely cover the pipes and merge with the finish, without standing out in any way from the general background. In addition, it is necessary to provide free access to valves and water meters. To do this, install a special hatch, plastic or metal. There are ready-made items on sale, you just need to choose the right size.

Concealed pipe installation

One of the ways to hide the sewer pipe in the toilet is the hidden laying of wiring and other pipelines. For this, at the stage of installation of communications, a recess (strobe) is made in the wall.

With hidden installation, it becomes possible to avoid the creation of unnecessary structures. The walls of the room remain flat. However, there are limitations. If you have to gouge a load-bearing wall, the depth of the groove should not exceed 15% of its thickness. This is a requirement of SNiP, compliance with which is mandatory for everyone.

In addition, embedding an existing sewer riser into the wall is a complex engineering challenge. If the pipeline is already installed, it will have to be shifted relative to the vertical axis. This will create difficulties in the passage of drains and can cause blockages. Therefore, when deciding how to close the sewer pipe in the toilet, it is necessary to clarify in advance all the nuances and the possibility of applying the techniques. Most often, hidden installation is used by owners of private houses, who take this moment into account even at the design and construction stage.

Box marking

Before you close the sewer riser in the toilet, you need to perform a number of preparatory steps. To install the structure, a support system is needed - a frame. Its dimensions must be carefully calculated, taking into account the thickness of the material of the planks of the supporting structure and the skin itself. It is recommended to draw up a plan of the room on a scale, mark on it all available pipelines and the distances from them to the walls. To do this, first make measurements with a ruler or tape measure.

When drawing up a drawing of the frame, it is necessary to immediately mark on it the site for mounting the hatch. To do this, you must have a ready-made assembly in order to know exactly its dimensions and installation features. In addition, you need a right or left element so that it is convenient to open and close it.

To assemble the frame, wooden planks or metal guides for drywall are usually used. Their size must be chosen so that the box is not too large. Considering the thickness of the cladding and decorative tiles (if it is planned to be laid), the size of the box may be too large.

Use of plastic panels

When deciding how to close the sewer pipe, it is recommended to consider plastic panels. This is a good way to solve the problem for inexperienced people. Advantages of plastic panels:

low price. Only 3-4 panels are required for assembly;
wide choice of a coloring, width, drawing. You can choose the material for the finished finish;
ease of installation. The assembly of plastic panels is quick and does not require any skills. All related profiles are on sale, you can arrange corners and junctions to the walls;
the material does not create a load on the supporting structures;
no response to moisture;
cutting and processing of panels is carried out with simple tools and is not difficult.

These advantages have made the material the most popular. The low price and ease of assembly allow the panel to be changed frequently, updating the look of the toilet. Panels are used in different cases, from installing an apron in the kitchen, to wall cladding. Plastic is not afraid of any influences, except for mechanical ones. However, when dents appear, the skin can be quickly and inexpensively replaced.

Drywall box

The assembly of a drywall box is usually done for further laying tiles. The process resembles the installation of a plastic structure. First, the frame is assembled, then it is sheathed with sheets of drywall. The last stage is the finishing coating (tiles, decorative plaster, painting, etc.). It is necessary to choose moisture-resistant grades of material, since it is impossible to close the sewer pipe in the toilet with ordinary drywall. It will absorb moisture and lose its strength, tiles or plaster will peel off.

It must be remembered that a quick dismantling of the box in this case is impossible, so you must first put all the pipes in order.

Other ways to disguise

When deciding how to close a sewer pipe, it is not necessary to be limited to well-known methods. You can hide pipelines under different designs. Some users install roller shutters that provide access to pipes without dismantling the entire structure. Others install a plywood box and paste over it with mosaics. There are craftsmen who install a semicircular case with textured plaster, mosaic tiles or other types of finishes. It is important to avoid excessive decoration or design design. The box should not stand out or look like an alien element.

Communications located in the bathroom do not decorate the room. No matter how much the pipes cost, they will not add to the attractiveness of the interior. The article describes effective ways to close the sewerage that runs in the toilet. Materials that are suitable for this are described. There is information about proven methods for making masking structures. It explains how to hide communications, sew up pipes without blocking access for maintenance.

How to close the pipes in the toilet

In a typical house, the wiring is simple - in the corner of the toilet there is a common riser of the sewer system, water supply pipes run in parallel. It is necessary to mask both the common risers and the branches extending from them.

Difficulties arise when it is necessary to hide not only pipes, but also metering devices, which require regular access.

An ordinary box in this case will not save, you have to make partitions or hide them with a screen.

In your home, this is easier to do if you think about masking communications during the creation of the project. Pipes are laid in the walls and technical hatches are installed to access the devices. You can place metering devices in a special room. In multi-storey buildings, deep strobes will not be allowed for sewer pipes, and the thickness of the walls will not allow this.

Only the closure and the outer decor of the back wall saves. You can decorate with any finish option. You can make a beautiful sanitary cabinet, which can be assembled quickly according to the scheme and with which you can close the plumbing.

Solutions how and how to close the pipes

The choice depends on the direction and dimensions of the pipes, their placement, installed devices

Interior features matter. The choice is up to the landlord.

Plastic panels

An inexperienced craftsman can also make such a design. Making a plastic box in a bathroom niche will be inexpensive. But it can only be used and repaired if the walls are already finished with plastic or painted in the same color.

Making a screen from a PVC plastic box:

Checking the quality of communications. It is required to verify the quality of the connections, the condition of the devices.
Surface treatment. Antiseptic compounds will prevent the appearance of traces of fungus and mold.
Framing manufacturing. A frame is made of wooden bars or a metal profile along the walls, pipes are hidden there.
Sheathe and decorate with removable panels. It is important to fix each panel correctly, use a stapler or small nails for fastening. Slots at the corners and at the joints can be hidden with decorative overlays.

It is not worth making a plastic hatch, it is better to buy a ready-made door. It cannot be hidden, so it is advisable to use a model that allows you to work comfortably.

When masking communications and metering devices, it is worth leaving access to them using a viewing window

Gypsum board construction

For the manufacture of a frame from a profile, scissors are needed for cutting metal, wood elements are made using a hacksaw. You will need a puncher to mount parts on the wall.

Wood must be impregnated with protective agents in advance.

After that, several steps are taken:

Mark the surface of the walls near the sewer.
Prepare parts of the frame.
Guides are attached along the riser.
Embedded elements are mounted in the profile.
Install hatch.
Plywood is attached to the end of the box.
Sew up the end with drywall.
Sew up the front.

For any subsequent finishing, drywall is covered with a primer. Most often they put it, with which the room is finished. Instead, you can paint the box or install plastic panels.

Plumbing cabinet

Convenient, mounted on the wall behind the toilet, allows easy access to all equipment. If there is enough space in the toilet, you can install shelves for storing household items. Doors are made from any suitable material, taking into account the style of the interior.

Hinged doors are fixed, just like any doors - they are suspended from the base on the hinges.

You can use sliding products or an accordion door

But keep in mind that an accordion will not require additional space, and sliding doors will not fit in a typical toilet.

Blinds

This design is good because it allows you to save free space. The regular ones are cheap and look good. They do not interfere at all, the plastic construction is easy to install. But they can not be used in an elegant interior. Metal blinds are stronger, do not use fabric ones, because textiles are not suitable for a wet room.

roller shutters

A solid and durable design, but in an ordinary bathroom it does not fit the interior and area. They can only be installed if you have enough space. Take a closer look at automatic models, controlled by a remote control.

False wall installation

The partition will serve to create an original decoration, convenience, separation of space. Surfaces can be decorated with all sorts of patterns, stickers to make decorative lighting. It is only necessary to choose the material suitable for this purpose.

Concealed installation - chasing

Can be hidden without installing a decorative cladding - hide the wiring in slotted strobes. With a perforator, grooves are made in places where pipes go, and water and sewer branches are placed in them.

With a hidden installation, you should try to run the pipeline in a straight line with one-piece assemblies and connections.

This installation method has 2 pluses - in the almost complete absence of elements that spoil the appearance, and in saving space.

There are several rules that do not allow gating:

Pipes are not laid in load-bearing walls.
Only pipes are laid in the gates, without detachable connections (soldered), access to other types must be provided.
Do not make recesses in the walls where electrical lines are laid.
It is necessary to take into account the expansion of the material and prepare strobes of a suitable width.

Examples of successful solutions

To mask pipes in, consider all factors - where you can carry out communications, the availability of equipment, the size of the room.

It may be better to install a drywall box or make a false wall. It all depends on the conditions of your apartment.