Before you start laying tiles, you need to familiarize yourself with its dimensions and characteristics. When choosing a bathroom design and for installation kitchen apron there is a need to choose not only the color of the finishing material, but also its dimensions. In order to choose a layout plan, you need to know the size of the tile. For wall decoration ceramic tiles passes in several forms: square and rectangular. The location of the rectangular can be both horizontally and vertically. The visual effect is different. Tiles that are laid out vertically make the room visually taller, and if laid out horizontally, the room will appear wider.

Dimensions of floor tiles: choose the required dimensions

The parameters and dimensions that floor tiles have are one of the main criteria when choosing a material. The difficulty of choice lies in the fact that this moment specialized stores provide not only plates with standard view, but also original forms that can surprise the buyer. Sometimes these forms lend themselves to combinations, and thus allow you to create a unique pattern or scheme for flooring. It happens that the owner prefers simplicity, in which case the width prevails over the length, or large plates are simply purchased. But the most important thing here remains the definition standard size plates that are used most often in private households are 300x300 mm. Of course, before purchasing, you can view samples which a consultant can provide you. Views viewed will help you realize correct selection tiles for your space.

Pick up the size floor tiles better for the interior

There are 8 sections in which the main dimensions of the plates are indicated, these are:

• 200-200, 100-100, 250-250, 150-150 mm, these dimensions correspond to square fragments;
• 100-200, 300-400, 150-300 mm, such dimensions are referred to as rectangular shapes;
• 114-200, 98-170 mm these dimensions refer to five-sided plates;
• 150-174, 200-230, 170-196mm are the sizes of hexagon molds;
• 68-98, 83-117, 97-139 mm such dimensions are inherent in triangular shapes;
• The size of a non-standard tetrahedral tile will be as follows: 76-173, 85-195, 100-230 mm;
• Octagonal elements have the following parameters: 70-100-200, 60-85-170;

In order to choose the right tile for flooring, you need to take into account the quadrature of the room, and in particular the open part that is intended for flooring. In order to get optimal design and visual expansion of the room, it is necessary to choose the most suitable cladding scheme, and think carefully about the correspondence of fragments of different shapes.

What is more important, length or thickness: tile dimensions

Tiled plates at creation give in to a certain regulation of the sizes. The format of each tile has a certain difference. In addition to the fact that their height and width are different, the thickness also has different indicators, and this point is important. If we talk about floor tiles, they will always be thicker than other models, since it is this option that lends itself to high mechanical loads, it can reach up to 14 mm, while wall tiles are equipped with a thickness of no more than 9 mm. These indicators depend on the type of tile.

Acquainted with different sizes tiles can be independently in specialized stores

It is important to pay attention to the fact that, if desired, ceramic floor tiles can be placed on the wall, but wall tiles on the floor should never be used, since under heavy load they can crack and cause injury. The optimal size of ceramic tiles for flooring is 300x300 mm. There are also a number of other sizes, both floor and wall ceramic tiles, but the most optimal and commonly used sizes are the above parameters. Different decorative fragments have separate properties, they differ in non-multiple and multiple indicators of the main tile format.

When choosing tiles at points of sale, you must remember that small size tiles contribute to a longer process and difficult installation.

To choose a tile for facing the kitchen, you need to take into account the small or large size of the tile; for the bathroom or toilet, you need to choose the average size tiles.

We select the size of ceramic tiles for walls

For cladding vertical surface the principle of proportionality must be respected.

Too large forms, even if the tile is very expensive, will not create anything other than a feeling of tightness and a significant reduction in space. While small fragments large room will look out of place, and will look like a large mosaic.

For wall cladding small room it is best to choose medium-sized ceramic tiles

In addition to all this, the position of the tile on the wall is of no small importance. If the ceiling in the room is disproportionately high in relation to the dimensions of the room, then a horizontally glued rectangular tile will visually reduce this drawback, but at the same time add length to the room. And if wall ceramine is laid vertically, then the walls will visually rise, and the length of the walls will decrease with this method. This laying principle is used to adjust the dimensions of the floor, if the tiles are rectangular in shape.

Reference standards: tile dimensions

Variants of ceramic tiles for wall cladding differ not only in standard sizes, but also in shape. At points of sale finishing materials There are collections in rectangular and square designs. In the case of talking about sizes, all this looks extraordinary, because some manufacturers are ready for bold experiments and provide the buyer with an extensive range of sizes.

Square-shaped tiles are standard options for wall cladding and have the following dimensions: 100x100, 150x150, 200x200 mm.

Ceramic tiles can be of different shapes and sizes, which you can choose at your discretion.

Also a frequent choice of buyers are rectangular shapes for wall cladding, the optimal size of which is 200x300 mm. But when facing walls with rectangular tiles, other sizes can also be used, such as: standard thickness wall tiles vary from 4 to 9 mm.

If we talk about optimal width floor tiles, they are sizes from 8 to 11mm.

Standard sizes of ceramic tiles (video)

Before you go shopping for floor or wall tiles, you need to understand that the size of the tiles is not the most important thing, the first thing to pay attention to is your interest in it. appearance, you should definitely like it. That is why designers recommend to start with choosing a certain collection, and only then, after consulting, choose optimal size. Remember that already in some collections there are several options for tile sizes, this greatly simplifies the task when buying.

Recently added articles:

Ceramic tiles are the most popular way of facing rooms today. And this is not surprising, because ceramics is a material that has a number of useful properties: it is durable, refractory, ...

Sooner or later, everyone thinks about simple question: "How to wash ceiling tiles"?". You can’t just take a damp cloth and walk on the tiles - you need to choose the means and method of washing in ...

You have decided that tiles will lie on your balcony on the floor. Bought tiles and installed them. But a year later, it turned out that all the beauty that you created on the balcony turned into garbage....

Most people who have never encountered the issue of laying floor tiles choose this scheme for buying it: measure the area to be laid, come to the store and ask to see exactly the floor tiles...

One of the main tasks of any repair of an apartment or house is the arrangement of the floor. Today there are all possibilities to create an even, durable, and most importantly, original floor. Floor tiles are now one of the...

DIY floor tiles - unique material surface coatings. Complex technological processes for manufacturing tiles in production by pressing or extruding cannot be repeated at home. These pro...

Due to the fact that floor tiles have excellent performance characteristics, they are deservedly considered the most reliable floor covering. Such a floor easily withstands permanent wet cleaning, pedestrian and static loads, according to...

Tell me, when looking at specialized magazines devoted to the design of a room, did you pay attention to how a tiled room looks like? Or rather, you had to see wires, pipes and all kinds of ...

The most durable and aesthetic are tiled floors. Possessing undeniable advantages, such floors have one drawback - they are fragile. Let's not be upset, consider the possibility of repairing floor tiles. Identification by...

Today, no one will be surprised by wood-colored floor tiles or imitating natural stone. bright colors or muted shades, white or black, plain or with patterns. Color shades in various variations...

The question of how to remove tiles from the floor most often arises during repairs. But it happens that you need to remove only a few pieces without damaging the rest. This happens when you need access...

Everyone knows perfectly well that the durability and reliability of floor tiles depends on its quality. For this reason, advice on the quality of goods of a particular manufacturer based on practical ...

One of the most common coatings is floor tiles: the catalog of any manufacturer provides several dozen collections to choose from. What is the best floor tile to choose? Proposals from manufacturers: what to pay attention to? R...

Types of floor tiles and their characteristics.

Floor tiles are one of the most practical types of flooring. Various types of floor tiles are used in industrial premises, in offices, and in trading floors, as well as in residential buildings and apartments.

The reason for the popularity of floor tiles in its undoubted merits. Namely:

• wear resistance;
• resistance to mechanical influences;
• ease of care;
• aesthetics;
• big choice colors, patterns, textures.

Widely represented on the market different kinds floor tiles. Therefore, before making a choice, it is necessary to study their characteristics and purpose.

So, in more detail.

Granite

As the name suggests, this species The tiles are made from natural rock - granite.

Advantages of granite tiles:

• strength;
• abrasion resistance;
• frost resistance;
• aesthetics.

Granite floor tiles, the characteristics of which allow them to be laid both outside and inside, are divided into two main types:

• polished (has a smooth almost mirror surface);
• heat-treated (has a natural look and a pronounced texture).

ceramic

Ceramic floor tiles also have many advantages:

• wear resistance;
• frost resistance (not all types);
• impact resistance chemical substances;
• hygiene (ease of care);
• aesthetics.

Ceramic tiles are especially popular with buyers because they are produced in different colors and shades, with various patterns and patterns. It allows you to realize almost any design project.

The scope of this tile is also wide. It can be used to decorate bathrooms, kitchens, hallways, pools, plinths, etc.

Often, buyers are interested in the question: “What is the difference between ceramic and tiles? Answer: A tile is a type of ceramic tile.

Porcelain stoneware (GRES)

Like previous types of floor tiles, porcelain stoneware has advantages that allow it to be widely used for decoration. different kind premises.

A significant difference between porcelain stoneware and ceramic tiles lies in a fundamentally different production technology. The thing is that ceramic tiles are actually made in two stages. In a first step, a base to be fired is made, which is patterned in a second step and fired a second time.

Porcelain stoneware is made in one step and is a complete material. In addition, porcelain stoneware perfectly imitates such natural materials like marble, stone, granite as well as wood, leather, clay.

By the way, this tile differs in one more useful property- thermal conductivity. Because she is capable for a long time keep warm, porcelain stoneware tiles are great for a “warm floor” device.

Clinker

The main purpose and scope of clinker tiles - exterior finish. This tile has a very high resistance to abrasion, water, temperature changes.

Clinker tiles are suitable for terraces, steps, paths.

As for its decorative qualities - it can imitate well different types natural materials.

Technical (industrial)

Of course, all types of floor tiles have good indicators of wear resistance and resistance to external influences, but technical (or in other words, industrial) tiles have higher rates in all characteristics and also have additional qualities. For example, resistance to acids.

Of course, it makes no sense to lay such tiles in an ordinary residential apartment. But for industrial workshops, it is perfect.

metal

Metal tiles are among the materials intended for finishing the floor in production workshops.

It is clear that the floor in such rooms is constantly under increased stress. Considerable damage to the floor can be caused by equipment and tools that are located in such a room. Therefore, the requirements for flooring are naturally increased.

It is metal tiles that best meet the requirements of such premises.

This tile is laid on top of a concrete floor.

Concrete

Concrete tile is a kind paving slabs, which is widely used for decorative finishes city ​​paths, squares, playgrounds, etc.

It is resistant to external natural influences and is quite wear-resistant.

dyed concrete tile in different colors, which makes it possible to use it to create an original drawing or pattern.

Cork

Cork tiles are perfect for apartments and houses where people with allergies live. The thing is that it absolutely does not attract dust.

Also, this tile is good because it does not rot and does not become moldy.

The disadvantages of this material include: instability to mechanical stress and ultraviolet rays. Such a floor can very quickly lose its original appearance.

Vinyl (PVC)

Advantages of vinyl (PVC) tiles:

• wear resistance;
• moisture resistance;
• soundproofing;
• pollution resistance;
• Possibility of installing a "warm floor" system.

It can be laid in high traffic areas: offices, trading floors.

The price of this type of floor tiles is quite democratic.

Among the many modern flooring materials floor tiles is one of the most common, which is not at all surprising. It has a rather attractive appearance, high mechanical strength and excellent operational characteristics. In addition, tiles may differ in their size, the presence of ornaments and patterns, as well as physical properties on which the scope of its application depends. The service life of the flooring, which was made according to all the rules using high-quality facing materials, can exceed 50 years, while the original appearance of the coating is preserved for a long period of operation.

Ceramic floor tiles are virtually impervious to dirt, easy to clean and highly resistant to detergents. Another important advantage of the tile is its resistance to chemically active substances, which makes it possible to use such a coating in laboratories, canteens and production shops.

Types of floor tiles and methods of obtaining

Depending on the production method, there are pressed and extruded tiles.

The first type of tile is obtained by pressing from a plastic mixture - a mixture, which usually includes a filler and a binder like clay. The process of product formation is carried out using a press and a shaping matrix, in which required amount source material. After giving desired shape the product, it is fired by the autoclave method, acquiring the necessary strength.

Extruded tiles are made by forcing the original plastic mass through the forming hole of the extruder head of a given geometry, after which it is cut and fired.

Floor tiles are glazed and unglazed. Glazed tiles have a vitreous glossy finish that is highly hard. Thanks to such a coating, on which a different pattern can be applied, the product has an attractive appearance and is characterized by increased moisture resistance. Unglazed tiles are homogeneous in composition and differ more simple method manufacturing. The desired color in this case is obtained by adding the desired dye to the initial mass.

In addition, there is a separate type floor tiles - porcelain stoneware. By its appearance and mechanical properties this type of facing materials resembles natural granite, however, its production technology is the same as that of pressed ceramic tiles. Ceramic granite is made from a mixture of spar or basalt chips and special kind clay by pressing and subsequent firing under pressure in an autoclave.

Main characteristics of floor tiles

Each type of floor tile differs not only in appearance and size, but also in technical characteristics that determine the scope of a particular product. We will take a closer look at the main ones.

• Frost resistance- determines at what minimum temperatures the coating can be used without the risk of cracking. It is important when choosing a facing material for external use and is most relevant for the northern regions of Russia, where the temperature in winter drops below -50 degrees.
• Water absorption- shows how much moisture a product can absorb in relation to its total volume and is expressed as a percentage. This parameter must be taken into account if it is planned to make a coating in rooms with high humidity, for example, in a pool, sauna or shower room.
• wear resistance- characterizes the resistance of the material to the appearance of scratches and scuffs as a result of mechanical stress. For flooring, this is one of the the most important parameters, on which the service life depends to a large extent.
• Resistance to chemically active substances determines the inertness of the material in relation to the effects of acids and alkalis.
• Fire resistance and fire resistance- depends on thermal expansion tile material and is expressed as a maximum allowable temperature at which the product will not crack.
• Slip resistance- shows how safe the coating will be for people. This characteristic is especially important when choosing a coating material in crowded places.

How to choose floor tiles for your home

If you plan to do flooring, then you should Special attention pay attention to the choice of material used. Not only the durability of the coating will depend on this, but also the convenience of its operation, as well as its appearance. When choosing, you should be guided by both aesthetic considerations and the technical characteristics of the type of tile you have chosen.

Floor tiles for the kitchen must be highly resistant to chemicals. As a result of the inevitable appearance of stains on the floor from hot grease, oil and other food, you will have to use it quite often. detergents, which include alkali, so the material from which the tile is made should not interact with it. In this case, you can use glazed or unglazed tiles designed for use in aggressive environments and with the appropriate chemical characteristics.

Choosing hallway floor tiles, it should be noted that you will walk on it in shoes, moreover, quite often various heavy objects items brought from the street, such as suitcases with metal legs, which can scratch the floor if it is not made of a hard enough material. Such a coating should have increased mechanical strength and resistance to mechanical stress. When choosing, it is best to give preference to dark-colored tiles with a colorful pattern, since dirt will not be visible on it as well as on a light plain coating.

Glazed tiles, which have a low water absorption coefficient, are usually used for flooring in the bathroom. Such a coating will serve for a very long time and over time will not lose its original appearance from constant exposure to moisture. In order for a wet floor to be safe, it is best to use products with a textured surface that provide good slip resistance.

For the floor in residential areas, for example, in the living room or bedroom, you can use different types of cladding that imitates any structure. For example, wood effect floor tiles will resemble parquet in appearance, and at the same time have all the advantages of ceramic products - strength, wear resistance, unpretentiousness and durability.

Floor tile manufacturers

Nowadays, in the market of facing materials, you can find tiles of both imported and domestic production. The products of such European manufacturers like Caesar, Argenta Ceramica and Acif. Along with excellent quality, they offer a wide variety of design solutions releasing new collections every year floor tiles, price which, however, is quite high.

If you are interested in inexpensive, but practical solutions pay attention to products Kerama Marazzi, which is produced in Russia using unique technology Italian company Kerama Marazzi on modern equipment and fully complies European standards. Also very popular facing materials Belarusian company Keramin, which is characterized by low cost, excellent workmanship, as well as a wide variety of colors and patterns. The Sakur collection recently released by this manufacturer in Japanese style was met with great enthusiasm by the consumer and received a lot of positive feedback.

Thanks to a wide range you can choose any product floor tiles, dimensions and the design of which will fully match the interior of your room. At the same time, it is not necessary to buy elite products from the best Italian brands. Among inexpensive tiles from domestic manufacturers you can also find high-quality and attractive facing materials that will serve you for decades.

Floor tiles are used for decoration various premises for many centuries. It is very difficult to find a building that does not have ceramics on the floor in the bathroom, hallway or kitchen. The reason for this popularity is the practicality and excellent aesthetic qualities of this material. It successfully imitates granite, marble, sandstone, etc. In addition, ceramic floor tiles are indispensable in bathrooms and operating rooms of medical institutions: they can be easily cleaned with any means. household chemicals, not afraid of exposure to aggressive substances.

Today, specialized stores have a large assortment, but in order to make right choice, you need to know what requirements this building material must meet.

The floor tiles will become good option to finish your floor, thanks to a wide variety of colors and textures.

About product quality

Ceramics for the floor, first of all, must withstand significant mechanical loads. That is why this material is made thicker than tiles intended for wall cladding. But not only the thickness plays an important role: production floor ceramics requires application quality materials and special technologies.

It is very important that the surface of the floor tile is not slippery: this property is especially important for rooms such as a bathroom, where there is often high humidity.

Of course, the tile should be in harmony with other materials that decorate the room, as well as with furniture and decor elements. To do this, you should pay attention not only to color, but also to texture: for example, in a sauna floor tiles under a tree will look very good, and on the porch of a private house or on the steps leading to it - with a pattern imitating natural stone or paving stones.

What is floor tile

Ceramics for the floor can be rectangular, square, hexagonal, have uneven (wavy edges), in the form of a jib and "Moorish". According to the manufacturing technology, pressed, extruded, Mexican and glazed are distinguished. And although it is the last option that is correctly called a tile, this name began to be applied to any ceramic tile.

Floor tiles can be different not only in shape, their sizes are also varied: from a few centimeters to a meter. Large format is mainly used in public buildings: waiting rooms of airports and railway stations, in supermarkets and restaurants. Small requires a lot of time and effort when laying, but this is offset by the spectacular appearance of the floor surface.

To separate species ceramics includes porcelain stoneware. For the first time this material began to be used by Italian designers. The technology of its manufacture has been improved from year to year, and as a result, porcelain stoneware has acquired exceptional strength and high aesthetic qualities. There were tiles of very large sizes.

Some information about manufacturing technology

Pressed tiles are produced from a mixture in the form of a powder. The composition of the raw material from which the pressing method is obtained ready product, includes sand, clay and other additives. Extruded tiles are made from a dough-like mass. The molding of such ceramics for the floor occurs with the help of a special unit that works by analogy with a meat grinder. It is the most fragile of all and therefore rarely used as a floor. Glazed can be glossy, textured and matte. Upper layer enamelled (glaze) in its composition is not much different from glass. best imitates natural materials tiles made of agglomerated marble.

Ceramics are fired once or twice. AT recent times the most popular single: it allows you to get products with the smallest deviations from the specified dimensions. In addition, it is denser and thicker.

The basis of ceramics for the floor can be porous or dense, which affects water absorption. Naturally, the less water absorption, the greater the strength of the tile.

Porcelain stoneware, which originally had small size and nondescript appearance, acquired completely different qualities after the technology of its manufacture changed. New methods of pressing and surface treatment (they began to treat it with special salts, apply glaze) made porcelain stoneware one of the most beautiful materials.

Floor tiles for the floor compare favorably with roll materials. First, it allows you to create on the floor variety of options laying, secondly, damaged areas of the floor can be easily replaced and, thirdly, there is practically no waste material left during the installation process. In addition, tiles can easily be overlaid with a raised floor that hides communications. Unlike roll materials, this will not impede access to inspection hatches.

Features of the tiled floor

All tile materials classified according to several criteria:

1. By type of raw material. Floor manufacturers make tiles from the following types of raw materials:
   • phenolic and polyvinyl chloride;
   • rubber and synthetic;
   • polymer cement and colloxylin;
   • coumarone and polymer concrete.
2. By structure. There are models with one or more layers that come with either a subbase (fabric, rubber) or without it;
3. In terms of aesthetics. The tile can have not only rectangular and square, but also figured shape. They also vary in color, size and texture. floor modern tile may have a glossy or rough surface, be made with embossing or a pronounced relief.

You can learn more about the differences and classifications of tile coatings from the video.

Characteristics of tiles

All types of floor tiles must have certain physical and mechanical properties that would ensure the wear resistance of the coating during operation. To date, the basic requirements for ceramic products are defined by GOST 6787-2001. In accordance with the main provisions of this document, when choosing a model, special attention should be paid not only to the aesthetic, but also to the technical side of the issue.

What properties should a high-quality coating have?

• Wear resistance. Tiles made from any type of raw material have a certain wear resistance class, the choice of which is largely determined by the intensity of floor operation. The greater the patency in the room, the higher the coverage class should be;
• Frost resistance. An obligatory criterion that should be taken into account when it is necessary to lay the floor in rooms with a low temperature. He shows critical temperature at which the material begins to crack;
• Hypoallergenic. Some types of raw materials contain volatile chemicals that can be harmful to health. They cannot be used in residential premises, but due to good technical indicators, they are used in manufacturing enterprises;
• Fire resistance. In rooms with a high risk of fire, it is necessary to take into account the temperature and time of exposure to fire at which the floor can catch fire;
• Moisture resistance. This indicator is taken into account when laying the floor in rooms with a special microclimate. Raw materials should not only be waterproof, it is desirable that they include components that would prevent the development of microbes and mold;
• Resistance to mechanical and chemical influence. This point is especially important when using tiles in enterprises where the floor is exposed to chemical active substances, as well as intense mechanical influence;
• Friction coefficient. Some types of materials have a fairly smooth and slippery surface. The degree of slip is determined by 4 main categories, which indicate the level of safety of movement on the surface.

The main types of tile coatings

As already mentioned, floor tiles can be represented not only by ceramic models. Today, there are many types of natural and synthetic materials, each of which has its own advantages and disadvantages. So, the main types of coatings include:

• Carpet and cork;
• Metal and quartz vinyl;
• Ceramic and stone;
• Rubber and PVC.

Some of the listed types of floors are used exclusively for commercial purposes, while others can be used in residential areas. To understand the advantages and disadvantages of each model, consider the features of all materials.

Traditionally, for finishing surfaces in "damp" rooms, it is used facing tiles for ceramic floor. This is due to the good physical and mechanical properties of the material, as well as its aesthetic appeal. According to the manufacturing method, there are two main types of ceramic products:

• Extrusion. Produced from clay raw materials by forcing a liquid mass through an extrusion head;
• Pressed. The tile is made from mixture, which is molded with a press under very high pressure.

Depending on the processing method of the semi-finished material, the floor covering can be glossy or rough, with or without an enamel layer. The advantages of ceramic flooring include:

• Low level of water absorption;
• Chemical resistance;
• High level of wear resistance;
• Resistance to high temperatures;
• Long service life (at least 20 years).

If it is necessary to lay the coating at manufacturing enterprises, they prefer models with a very dense base and low porosity. They possess best performance durability, but are more expensive. In the circle of ordinary consumers, Gres tiles for the floor are in the greatest demand.

The tile of this manufacturer is created using a special technology in which kaolinite is added to the clay mass. Due to this, the coating is very durable and in its own way technical parameters it is not inferior even to granite. Distinctive feature material - high frost resistance and resistance to moisture.

PVC tiles

PVC floor tiles are one of the most budget options gender. In fact, this is an ordinary linoleum, which is made in the form of plates. They can go both on an adhesive basis and without it. The coating consists of several layers, which provides it with a sufficiently high level of wear resistance.

You can lay the material not only on concrete screed, but also on plywood or old linoleum. The advantages of PVC boards include:

• the possibility of laying on any type of base;
• high moisture resistance;
• no shrinkage during operation.

However, the synthetic floor has several tangible disadvantages, in comparison with ceramics:

• short period of service (no more than 10-12 years);
• "fear" of high temperatures;
• instability to certain types of chemicals (acetone).

Depending on the conditions of use, there are several classes of PVC tile coating:

• 21-23. It is used in residential areas with low traffic;
• 31-33. It can be used not only in residential premises, but also in public buildings;
• 41-43. Suitable for warehouse and production facilities with high level patency.

Vinyl and quartz vinyl tiles

Vinyl tile is a multilayer synthetic material, which has good aesthetic performance, as well as wear resistance and moisture resistance. As the name implies, the material contains vinyl, which provides the floor with good specifications.

As a variety, a quartz vinyl coating is also isolated. It costs a little less than a vinyl floor, which is due to the addition of an inexpensive filler, sand, to the coating composition. The tile consists of several layers, the main of which include:

• Protective - represented by a polyurethane wear-resistant film;
• The main one is made of vinyl;
• Decorative - contains a picture;
• Lower - can be made of polymer or fabric.

Basic quartz vinyl coating:

• moisture resistance;
• good depreciation;
• neutrality to the effects of chemicals;
• anti-slip properties;

In addition, vinyl floor tiles for underfloor heating are just perfect, due to the good heat transfer of the material.

metal tile

Modern technologies have made it possible to produce floor coverings not only from traditional species raw materials, but even from metal. Thanks to a special polymer film, the floor does not oxidize upon contact with water. Due to this, the technical characteristics of the tile are significantly improved.

Of course, metal models are most often used in manufacturing plants, which is due to intense loads on the coating. concrete surface, reinforced with just such a tile, becomes practically “not killed”. In addition, it has increased heat resistance, unlike synthetic raw materials.

To the main benefits metal products include:

• wear resistance;
• fire safety;
• impact resistance;
• durability.

In private dwellings metal coatings are extremely rare, since the surface of the metal is quite cold. That is why it is most often equipped in the underfloor heating system.

stone tile

For the manufacture of tiles, artificial or real granite or marble is used. Both types of material have high wear resistance and at the same time have excellent decorative qualities. The photo shows floors made of clinker tiles.

The advantages of the floor include:

• long service life (at least 25 years);
• frost resistance;
• aesthetics;
• fire safety.

Whichever type of tiling you choose, you must first take into account the technical qualities of the model. For example, hygroscopic materials should never be used in damp rooms, while others are afraid of frost or undergo large linear expansion with temperature changes.

The convenient "format" of the tile coating allows it to be used in any type of room, as evidenced by the reviews of ordinary consumers:

• Didn't want to put regular tiles in the bathroom, and imagine my surprise when I saw vinyl tiles. Firstly, it costs less than the traditional one, and secondly, it is easier to lay it. I've been using it for two years now and have no complaints. Of course, in some places it has faded a little, but, in principle, the floor looks pretty;
• A year ago in the dining room I made a bed cork tiles. It turned out very well, in my opinion. If any of the squares lag behind or deteriorate, replacing them, in general, is not difficult;
• For a long time it was necessary to change the floor in the kitchen, but there was not enough money for tiles. Then my wife and I, at our own peril and risk, decided to put PVC plates. Pah-pah, but for three years nothing has been peeling off anywhere.

Overview of tile manufacturers

In the process of choosing floor tiles, it is very important to pay attention to the manufacturer. It is not always possible to determine the quality of the material by appearance, but the good reputation of the manufacturer is already at least 60% of success.