Door 700x2000 box size. Standard dimensions of the door frame of the interior door and self-measurements. Formulas for measuring the door leaf

When selecting interior doors, the dimensions of the opening with the frame and the parameters of the leaf itself are taken into account. In order to accurately determine suitable values, it is necessary to make preliminary measurements of the filling area and take into account the standard values ​​​​for setting the loot. Depending on the type of construction, some parameters may differ, and therefore this issue should be considered in more detail.

Dimensions of interior doors comply with generally accepted standards

Standard dimensions

When considering the dimensions of interior doors, along with the box, several indicators are taken into account at once: the width, height and thickness of the elements, as well as their weight. First you need to consider the doorway itself. Since it is supposed to be filled in the future, the initial dimensions will be somewhat larger. During subsequent work, wooden beams, bricks or drywall can be reported to adjust the width and height, affecting the maximum allowable weight of the structure.

The main parameters of the doorway

An important component of the opening is the box, its dimensions should approximately coincide with the parameters of the door leaf. At the same time, it is important to observe technological gaps around the perimeter. The thickness of the frame is selected according to the thickness of the wall. If the width of the slats is not enough, extensions are applied as compensation for the free space.

The central element is the doors themselves, most often swing doors. What are the standard dimensions of an interior door? To answer this question, the following parameters must be considered:

  • Interior door height. A canvas 200 cm high is considered to be the standard. This indicator can often vary between 190-210 cm. The exact parameters are selected individually. It is important to leave enough space between the canvas and the floor for further unhindered movement of the door or.
  • Door width. This is one of the most important parameters. Doors with a width of 80 and 70 cm are considered standard. In some cases, for example, for a toilet and a bathroom, it can be reduced to 60 cm. But the entrance doors are wider - mainly from 90 to 100 cm.
  • Web thickness. The thickness is rarely selected individually and largely depends on the specific material and the manufacturer itself, and directly affects the weight of the product.

Double door models

Double-leaf swing doors look very impressive and stylish in the interior. The canvas in this case consists of two wings. Their width depends on the type of model and the dimensions of the passage itself.

For double-leaf interior doors, dimensions can be taken with an increase by a factor of 1.5-2, that is, double values ​​are taken.

The standard dimensions of double interior doors with a frame are 120-150 cm. Such dimensions allow you to install a full-fledged double-leaf design that is comfortable to use. For minimum dimensions, double interior door structures are assumed in the following design: in them one leaf is fixed in place, being temporarily or completely immovable. Its width is half or a third of the standard parameter. The second part of the door leaf is a full-fledged door. If the width allows, two equivalent sashes are installed. This allows you to create not only a visual effect, but also increase patency by expanding the passage as needed.

The standard height of such interior doors remains within 200-210 cm. With high ceilings, it can be increased by adding a fixed insert to facilitate the use of the leaves, since their weight also increases accordingly. Such double-leaf structures can be seen at the entrance to large rooms in rich houses or in public buildings.

Dimensions of standard double-leaf doors (one-and-a-half and two-leaf)

Unusual solutions

By no means always, when choosing the dimensions of a door structure, the owners comply with the norms. Today, non-standard solutions are becoming more and more popular, which allow you to bring design to a new level. These include, first of all, design options for passages in interior partitions erected from plasterboard sheets. Here you can not only increase the height and width of the opening, as on double doors, but also bring out an unusual shape of any complexity. In this case, it is important to take into account the weight of the canvas, since drywall partitions are not able to withstand excessive loads. In this case, it is worth limiting yourself to the minimum dimensions of swing interior doors or choosing a lighter material.

Sliding doors will be an excellent alternative: compartment, accordions or books. Double models can also be used.

Non-standard doors include various sliding systems

In general, among the sizes of interior doors that do not comply with the standard, only two characteristics can be distinguished:

  • Height. Reducing the height is highly undesirable, but its increase is quite acceptable. This is especially true for private houses, where the height of the ceilings allows designer imagination to roam.
  • Width. In terms of changing this parameter, there are only restrictions on the distribution of the load. With more than 2 meters, you need to install additional supports that will serve as a jumper between the canvases. With a shortage of free space, the canvas can be narrowed to 55-60 cm, which will also lighten their weight.

Box dimensions

When the dimensions of the interior door have been determined, it is necessary to correctly select other elements for filling the doorway. Since the frame is the basis for installing the door leaf, it is important to determine the relationship between this element and the opening.

The total height of the interior door, together with the frame, can increase by 10-15 cm. The same applies to the width, and two sidewalls are taken into account. At the same time, keep in mind that you need to leave a gap between the wall and the lutka for installation, and the canvas itself should be smaller than the frame to prevent rubbing. The thickness of the door leaf for the interior door is consistent with the thickness of the wall itself and.

Properly installed swing doors should look organic in the interior, comply with the requirements of GOST and SNiP, and also be convenient, first of all, for the owners of the premises themselves.

There are a huge number of door structures for interior rooms in an apartment or cottage in terms of design, material of manufacture and opening mechanisms. Moreover, most of them are made according to GOST sizes for interior doors. This greatly simplifies their selection and installation. Of course, you can install a model with non-standard dimensions in your home. However, such a product will cost more than a standard version made in accordance with GOST.

GOST requirements for standard doorways

The dimensions of the interior door (door block) must strictly correspond to the dimensions of the opening in the wall between the rooms. In fact, it is the opening parameters that are prescribed in building standards and GOSTs. And in accordance with them, you already have to select the thickness and width with the height for the door frame and the leaf inside.

If a unique design interior is created in a private house, then the doors to the rooms can be made whatever you like. It is only necessary at the stage of project preparation to provide openings in partitions and load-bearing walls of the required dimensions. But then door products will have to be ordered according to individual parameters for more money than standard options.

Creating an exclusive interior, do not forget that the door can complement the style, if you approach the issue correctly.

With urban apartments, the situation is fundamentally different. All of them are built according to standard design solutions, in which the openings for interior doors were initially laid down to standard sizes. And in the vast majority of cases, expanding this hole is prohibited. Here it remains to select the door structure only for the existing realities. And knowing the requirements of GOST, the choice of a door in a store will be simpler and more error-free.

What is the structure of the door

Marking of interior doors

When choosing an electric generator or a submersible pump for dirty water, you have to carefully study many parameters in the data sheet for this technique. There, the power of the unit, and productivity, and other quantities are important. With an internal door, everything is much simpler. In the accompanying documentation, it indicates a set of numbers and letters that fully describe the width and height, as well as the design features of the product.
According to the design and method of opening, door blocks are divided into several main types:

  1. "G" - a deaf wooden canvas.
  2. "O" - a canvas with a glass insert.
  3. "Rp" or "Rl" - swing right or left door.
  4. "K" or "P" - swinging or sliding design.

Design options for interior doors

In addition to these letters, the marking also indicates:

  • type of product - door block for the entrance to the apartment ("DV"), interior ("DM") and for the bathroom ("DS");
  • width and height of the opening - two digits in decimeters;
  • the number of sheets in the block;
  • air permeability class ("B1", "B2" or "B3") and strength ("Md1", "Md2", "Md3" or "Md4");
  • standard designation "GOST 475-2016" (introduced to replace the old GOST 6629-88).

In the above standard there is a table where the standard dimensions of interior doors are prescribed. More precisely, reference dimensions of openings in walls and partitions are indicated there. It is from these sizes that manufacturers of door blocks are repelled. According to them, the height of the opening can be 1870, 2070 or 2370 mm, and the width is from 710 to 1950 mm.

brand Dimensions, mm
Box canvas
Height Width Height Width
21-7 2071 670 2000 600
21-8 2071 770 2000 700
21-9 2071 870 2000 800
21-10 2071 1170 2000 900
21-12 2071 1170 2000 1100
21-13 2071 1272(1298) 2000 1202(1204)
21-15 2371 1472(1498) 2300 1402(1404)
21-19 2371 1872(1898) 2300 1802(1804)

Dimensions and thickness of the canvas

The width and height of the door leaf are usually made 70 mm smaller than the dimensions of the door along the outer perimeter. 30-35 mm on each side goes to the box (frame). But there may be other options that are far from these standard values. Manufacturers are free to choose the dimensions of the product parts themselves in accordance with the design and materials from which it is made.

  • for the kitchen - 70 cm;
  • for the bedroom and other rooms - 80 cm;
  • for the living room - a double-leaf model of 120 cm;
  • for the bathroom - 60 cm.

Typical dimensions of interior doors for different rooms

The standard height in all cases is assumed to be within 1800–2000 mm, and the web thickness is 30–40 mm. At the same time, it is recommended to install doors a little thicker and with a more moisture-resistant coating in a bathroom or bathroom than in ordinary rooms.

How to measure the height for doors with a threshold

Standard box dimensions

The width of the box should ideally match the thickness of the wall. If the door is thicker in size than the interior partition, then it will be difficult to fix it in the opening. Plus, ugly gaps under the casing will remain on the sides. In the reverse situation, when the wall is too thick, it will be necessary to install additional additional elements (additions).

The design of interior doors with dobor

Opening dimensions

Typical dimensions of doors with a frame and openings for them are described in GOST standards. House designers and door block manufacturers try to follow these guidelines to make it easier for builders to select materials. However, often constructed buildings have deviations in height or a slight slope.

How to properly measure a doorway

An opening for an interior door in domestic high-rise buildings that is different from standard dimensions is far from uncommon. When measuring it before going to the store, behind the door block, the width and height of the hole existing in the wall should be measured in several places at once. It will still need to be leveled strictly vertically. If you make a mistake in measurements, then the product is unlikely to be mounted according to building rules.

Necessary measurements for interior doors

Double doors

If the opening is wider than 80 cm, then it is recommended to install a double-leaf door into it. The size of the door leaf is selected in such a situation as for two halves of a single structure. In rare cases, it is also possible to install a one-and-a-half model - one canvas is large, the second is half as small. But even here it is better to try to choose an option with two sliding doors. It will look more aesthetic than a one and a half analogue.

Doors with hidden frame

Owners who want something unique in the interior often refuse standard models and prefer to install doors with a hidden frame. In these blocks, the door leaf is flush with the wall surface, and there are no trims as such. The dimensions of interior doors of this design are selected according to the same scheme as the usual ones. Only in terms of thickness, they should ideally correspond to the parameters of the interior partition, so as not to protrude from it even by a centimeter.

Choosing an interior door is a responsible matter. It is important to pay attention not only to the models you like, but also to their parameters. In this article, we will consider all possible, as well as standard sizes of interior doors with and without a box. We hope that this material will help you to carefully prepare before going to the store.

Door parameters

Today it is important to understand that in the modern market there are designs of a domestic manufacturer and a European one. So, the dimensions of interior doors of domestic production fluctuate around 55–90 cm. As for European standards, the standard door sizes are within the following limits: 60, 70, 80 and 90 cm.

However, when choosing an interior door, it is important to consider that the openings in the room may vary slightly. Their width directly depends on its purpose and the purpose of a particular room.

So, the following dimensions differ (all measurements here and below in this section are given in mm):

  • In the bathroom and toilet there may be a width in the region of 550–600.
  • The guide to the kitchen can have a width of about 700.
  • Between rooms they are usually about 800 wide.
  • At the entrance to a residential apartment / house, the width usually reaches up to 900.

As for the thickness of the door, it is in the range of 40. The thickness may vary based on the material used. For example, if they are sliding, then their thickness is about 20. Purely wooden structures can have a thickness of as much as 50.

Another important dimension to pay attention to is the height. If earlier the standard was usually reduced to two values, namely 1900 and 2000, today it is diverse on standard designs. On the market, you can find buildings even 2300. Although, if we talk about a specific standard in Europe, then the height is fixed at 2100, and we have 2000.

Important! Of course, these parameters are conditional, especially when it comes to buying ready-made doors. If you contact the carpentry workshop, then they will make you individually according to the size of your opening. As a result, the dimensions may be far from the specified norm.

Dimensions according to GOST

In this section, we suggest that you take a look at the recommended parameters according to GOST. So, the standard dimensions of interior doors are based on the following parameters:

  1. With a door leaf of 190, their width should be 50 or 60 cm.
  2. With a door leaf of 200, their width should be 60, 70, 80 or 90 cm.

As a rule, manufacturers are guided by the standard dimensions of interior doors in order to meet the needs of people. Although if you have a need to increase the width of the canvas, then this should not cause much difficulty.

Double door dimensions

Doors to the living room can become a real business card. As a result, it is necessary to choose them correctly. Many prefer double-leaf designs. Of course, for such a solution, the opening for the interior door is larger. So, speaking of height, in most cases it is in the region of 200 cm. As for the width, there is a great variety. The size can vary from 128 to 160 cm. That is, this size is divided in half and it turns out that one sash can have 80 cm.

Box dimensions

As for the door frame, very often it is sold immediately complete with a door leaf. Plus, all the necessary fittings are immediately provided: locks, awnings, handles, platbands, and more. The box itself is a P shape. This box allows you to securely fix and hold the door leaf. In order to avoid any difficulties in the process of installing the structure, it is best to buy a fully finished kit.

The box is made from wooden bars. Their width can vary between 1.5 cm and up to 4 cm. Although speaking of standard sizes, it is 3–3.5 cm. If this parameter is observed, then high-quality fixation of the box and door leaf is ensured throughout the entire operational term.

As for the thickness of the box, it usually corresponds to the thickness of the partition / wall. If the walls are made of brick, then the thickness usually reaches up to 7.5 cm, and in wooden houses up to 10 cm. What if the structure is relatively narrow? For this purpose, special additional elements can be used.

Opening dimensions

The dimensions of the opening for interior doors also have certain standards. However, sometimes they can be made without starting from them. So, the height ranges from 1940 to 2050 mm. As for the width, there is a wide variety. As mentioned above, the width depends entirely on the purpose of a particular room. The minimum opening according to the standard can be 630 mm, and the maximum 1600 mm.

Before going to the store behind the doors, it is worth making the correct measurements of the opening. To do this, you need to follow a simple algorithm:

  • Complete dismantling of the old door leaf and frame.
  • It is completely cleared of possible putty, up to the base wall.
  • When measuring width, take measurements in three positions: bottom, middle, top.
  • As for the height, it is important to determine the base floor on which the installation will be carried out. After that, in width, measure the height in several places.
  • Also measured in several places and thickness.

During a major renovation, every homeowner will inevitably face the issue of choosing interior doors. It is not difficult to choose the best design option for the door leaf that matches the interior of the room - there are many interesting offers from manufacturers on the market. When choosing an interior door, attention should be paid to the dimensions of the door leaf along with the frame. As a guide, you should use the GOST standard, which greatly simplifies both the choice of design and its subsequent installation.

Standard sizes of interior door frames: width, height and thickness

The GOST standard strictly defines the dimensions that the door frame must comply with. Dimensions may vary depending on the functional purpose of the room for which the interior door is selected.

  1. The width of a standard interior door frame for living rooms is 80 cm. At the same time, the standard thickness of such a doorway into which the frame is inserted is from 7 to 20 cm (depending on the type of material from which the house is built).
  2. The width of the door frame of the interior door for the bathroom is 60 cm. At the same time, the standard height of the doorway is from 190 to 200 cm.
  3. The standard width of a modern interior door for the kitchen is 70 cm, and the thickness of the doorway in this case is 7 cm. The height of the opening into which the door frame is inserted is also standard and is 200 cm.

This standard is universal. These dimensions are taken into account by designers when choosing different types of door structures, including if an interior door is planned not of a hinged, but of a sliding type.

Dimensions of interior doors with a frame: width and height for the living room

The living room is the hallmark of the house, so the interior door designed for this room is chosen especially carefully. As a rule, the dimensions of the doorway that meets the standards in this room are slightly wider than the openings in other areas of the house. The same standard is used in the construction of apartment buildings. As a rule, the height of such an opening is from 201 to 205 cm with minor possible deviations. The width that the box must correspond to varies from 128 cm to 160 cm. In most cases, a double-leaf interior door is used to equip such a doorway, the width of each leaf of which is 60 cm. When choosing the size of the wings, the width of the box and the individual preferences of the customer are taken into account . For example, an interior door can consist of two independent leaves, the dimensions of which are exactly the same, for example 60 cm. Or you can order options in which the door leaves are of different sizes (60 cm and 80 cm). It is worth noting that this width of the blocks meets the standards.

The door frame to the living room or to any other room should be slightly smaller than the opening into which it will be mounted. If the width of the opening is standard, then in this case the door frame will be 10-15 mm less from the walls of the opening. This is necessary for the quality installation of the door. It should be noted that regardless of the material from which the door structure is directly made (array, MDF), the door frame, namely its parameters, remain within the limits determined by GOST.

How to measure interior doors with a frame - width, height and thickness

In order to determine as accurately as possible what width of the door frame corresponds to a certain doorway, it is necessary to correctly measure the dimensions. To determine if the width (thickness) of the doorway is standard, you should use a tape measure and follow the basic recommendations:

  1. First of all, the old box is dismantled, and the opening itself is prepared for the removal of the necessary parameters - the remains of plaster and mounting foam are removed until the doorway acquires a clear outline.
  2. What width of the opening is determined by taking parameters at three different points - at the bottom, in the middle and at the top.
  3. The length is measured from the top of the opening to the floor. Experienced craftsmen, in order to avoid inconsistencies in the parameters, recommend taking height measurements in several places.
  4. The thickness of the wall of the opening into which an interior door made of MDF or solid wood will be mounted is also determined on the basis of taking several measurements - on both sides and the upper part of the opening in which the box will be fixed.

If the width of the doorway to be equipped does not correspond to the standard parameters according to which the selected interior door is made, then in this case the shortcomings must be eliminated. Depending on the situation, a decision is made to adjust the opening for the installation of an interior door. So, for example, if the width of the opening does not match the parameters of the box, then in this case the walls can be cut through (if you need to increase the width) or reduce the opening using an additional layer of plaster or mounting foam. If the interior door is narrower than the thickness of the wall, then in this case it is possible to correct the thickness of the wall with a perforator in accordance with the required parameters.

It is known that furniture comes in standard and non-standard sizes. In the first case, it is easy to find suitable items and easily repair them. And their price is more affordable, since production does not require equipment setup. In the second case, it is much more difficult to choose a product with suitable parameters, and custom-made will cost more.

The thickness of the door frame of the interior door refers precisely to such parameters.

The emergence of the standard

The emergence of a standard for any product is associated with several factors. For kitchen furniture, these are, for example, ergonomics and dimensions of kitchen appliances, for a bookcase - the sizes of books, which are quite standardized. Doorways are also made based on certain rules:

  • the width of the opening cannot be less than 60 cm. Otherwise, it will be practically impossible to use it;
  • the same parameter for a single-leaf design cannot be more than 120 cm, since in this case the canvas will have excessive mass;
  • height, as a rule, is limited to 2100 cm, and it is found even lower, since houses with very low ceilings were built in the USSR;
  • the material of the wall practically does not affect the thickness of the box, but the thickness of the canvas matters;
  • taken into account when developing the frame material web. As a rule, the frame and the canvas are made from the same material, so that the weight match is observed here. But when replacing a product, this feature must be taken into account.

Dimensional parameters

A store or custom build will usually offer the model along with the box. Moreover, when choosing dimensions, attention is drawn precisely to the overall dimensions. They measure the dimensions of the entire block, add 1.5 cm each and get the opening parameters that are needed to install the door.

If we are not talking about a main wall with a very large thickness, then adjusting the dimensions of the opening to the dimensions of the canvas in the frame is easier and, ultimately, cheaper than ordering a product under the opening.

On average, the box adds 70 mm to the canvas around the perimeter. The standard dimensions of the box correlate with the parameters of the sash itself as follows.

Dimensions of interior door frames: width, height and thickness.

Interior door door frame
Height, mm Width, mm Height, mm Width, mm
2000 600 2071 671
2000 700 2071 770
2000 800 2071 870
2000 900 2071 970
2000 1202 2071 1272
2300 900 2371 970
2300 1402 2371 1472
2300 1802 2371 1872

The last 2 options suggest the presence of 2 valves, at least a narrow inactive one and a wide active one.

  • What thickness of the interior door frame is suitable depends on the size of the wall. The thickness of the opening wall in most buildings is 75 mm. Accordingly, the standard thickness of the interior door frame is 75 mm. A value of 95 mm is very rare, and even less common is 65 mm.

If the wall differs in very atypical dimensions, then they resort to special techniques. For example, with a large value, the opening is blocked with the help of an expander - a slope or an extension. And if the wall is too narrow, then even cutting the frame is allowed, so long as it can hold the canvas. In the photo - the design of the opening with slopes.

It is much more convenient to consider the parameters of the kit, and not the canvas, due to the fact that the finished block provides gaps for the free opening of the sash and for installing fittings. If the frame is selected separately, the gaps must be taken into account independently, and their size depends on the material of the web.

materials

It is best if the entire door block is made of the same material. Firstly, the same material reacts to changes in temperature and moisture in the same way. Secondly, the material wears out in approximately the same way, which does not cause aesthetic dissonance.

This parameter does not affect the dimensions of the interior door frame in terms of thickness, however, if it is necessary to use expanders, it becomes important.

  • Solid wood is an expensive and beautiful material that is always popular. However, the array noticeably reacts to dampness.

  • MDF is the most popular material. Its size constancy compares favorably with wood: under the influence of temperature or dampness, the canvas does not change. MDF can have a different coating, which both increases the cost and reduces the cost of the product:
    • veneer - a cut of natural wood. This option cannot be distinguished from the array, and its resistance to dampness is higher;
    • eco-veneer is a multi-layer plastic that accurately reproduces the color and texture of wood. Ecoveneer has a very high wear resistance, so it is recommended to use it in public places;
    • melamine film - a common coating for the material, reproduces the color, but not the structure of the wood.
Loading...
Top