Change the glass on the interior door. Glass for interior doors. How to insert rectangular glass

The use of glass in interior doors is a popular technique in interior design. Glasses add airiness and lightness to the room, increase natural light, and just look good. But since glass is very fragile construction material, it is not uncommon for one part or all of the glass to be replaced. Broken glass cannot be left in the door, in addition to reduced aesthetics, it can be dangerous if the glass falls out completely or partially. Replacing the glass in the interior door with your own hands is not difficult, you will need care, accuracy and minimum set tools.

Types of glass for interior doors

In many ways, working with glass depends on the type of glass that you have chosen for installation in interior door. The most common are 3 types, the features of each must be taken into account while working with it.

Ordinary glass. The advantages of the material include affordable price, work with glass does not require special knowledge and skills. But after fixing ordinary glass additional finishing will be required, which entails an increase in costs. Buy either impact-resistant glass or cover it with a special film that prevents the glass from falling apart in the event of an impact - these secrets are also associated with an increase in the price of glass.

Decorative glass. In montage decorative glass as simple as the previous version. The choice of various patterns and types of decor will not leave indifferent the most whimsical buyer, everyone will find glass that will fit into his ideas about the future piece of furniture. Among the shortcomings, one can single out a rather high cost per unit of material, as well as difficulties in selecting new glass if replacement is necessary.
Organic glass. Plexiglas is not quite a derivative state of glass, the material is close to plastic in terms of characteristic qualities and operation. And this is both a plus and a minus of the material. The advantage of organic glass is its strength; it is not easy to break such an insert. The disadvantage of organic glass is the gradual change in appearance, over time it becomes cloudy. To avoid this, it is necessary to cover the plexiglass with a special composition in a timely manner.

Glass replacement tools

So that nothing distracts you during work, prepare in advance the materials and tools that you may need in the process.

Selected replacement glass, right size, processed along the edges, safe to work with.
Gloves to protect hands from cuts. Thin garden gloves will not work, they will not save you from sharp glass in case the material falls and breaks, pick up strong special clothes.
From the tools you will need a chisel and a furniture hammer
Sealing paper will be needed to fit the glass to the size of the desired groove.
Prepare silicone to firmly fix the glass in the doorway.
Do not remove the broom and dustpan far away, sweep regularly during work to prevent cuts and splinters.

Glass replacement step by step

Replacing glass in an interior door in stages consists of several sequential procedures.

Remove the door from its hinges, put it on the floor, on flat surface. Place a thick material under the door so as not to damage the canvas and flooring. Make sure the door is firmly in place, it should not wobble or ride under you on the floor.
Using a chisel and hammer, loosen and carefully remove the glazing beads holding the glass in place. Carefully, using gloves, remove the glass fragments from the opening, check that there is no glass left in the door. Sweep the work surface.
Remove the lining, sealant residues from the opening. When replacing glass, these compounds will have to be replaced with new ones. Take advantage of the fine fraction.

Apply silicone around the perimeter of the opening. Use a spray gun for even distribution. Pull the protective gasket over the glass, install the glass in the opening. Apply a second layer of silicone, only on the other side of the glass.
Install the fixing glazing beads in their places, nail them with thin carnations. Let the silicone dry for a few hours, then hang the door on its hinges. Job completed!

Replacing the glass yourself is easy, this step-by-step instruction will help you get things right. The main thing is to responsibly approach safety and the choice of new glass so that the result pleases you for a long time.

To characteristic features current trends interior design include the desire to create the most spacious conditions. Glass for the interior door has great importance in solving this problem - you can buy such a canvas with any type of finish in our store "World of Glass". All products comply high quality, because it was created by masters with the help of the latest technologies. Thanks to own production we have the opportunity to offer ready product custom made especially for you.

Glass for an interior door: which one to buy

To complement the interior with lightness and elegance, while getting rid of the feeling of isolation, a properly selected glass sheet will help.

Where to buy glass for an interior door and what material to give preference to? Looking for ideal solution the main thing is to achieve both aesthetic and practical goals - Special attention pay attention to strength characteristics.

Varieties of glass depending on the production method:

Simple - has good optical properties and optimal transparency.
Hardened - referred to as special strong species, obtained by firing ordinary glass at high temperatures: so it becomes more resistant to mechanical stress.
Triplex is a high-strength material consisting of several layers glued together with a transparent elastic film.

We offer to buy glass for an interior door of any degree of strength - all products meet quality standards and are characterized as reliable and durable.

Decorative finish options:

Matting - the effect is achieved as a result of sandblasting or chemical etching. Thanks to these technologies, it is possible to make a matte pattern on a glossy surface.
Staining - the dye is applied to the material on one side, after which the glass is heated to fix the coating.
Printing - a unique pattern is obtained by conventional or screen printing, silk-screen printing.
Pasting with a film - allows you to decorate the canvas with any image, inscription or logo.

Important! Mechanical manipulations with tempered glass are carried out before heat treatment.

If you are interested in such an opportunity to decorate the interior and you do not know where to buy glass for an interior door, contact the manager of the company and he will help you make a choice.

Together we will achieve the desired result!

Broken glass in the door of the room is an unpleasant thing, greatly spoiling the mood and interior of the apartment. In addition, it is unsafe and fraught with cuts and other injuries. What to do? Carefully collect fragments and urgently engage in glass work.

Can't do without a professional?

True, experts do not advise amateurs to master these very works. Design modern apartment so complicated and advanced that an amateur most likely simply will not be able to figure out the design, will not understand the glass fastening scheme. Even a professional carpenter who is not familiar with the technological innovations of repair and with the features of your particular model, it is quite possible to screw up this work. And you will pay for the glazing twice: to him and to the master for eliminating the marriage.

This is in case you spent good designer and an expensive team of builders and your interior doors are decorated with glass baguettes, ruffles, colored and mirrors. If your apartment is the simplest, without bells and whistles and you are used to doing repairs with your own hands, you will not encounter any prohibitive difficulties in replacing the transparent rectangle between the room and the corridor.

Hopelessness with triplex

To begin with, let's figure out whose production your door is and how glass was attached to its canvas. Because if it is veneered from the Ulyanovsk factory with glass 10 millimeters thick (with a standard of 4-6), then you still can’t do without contacting the master: this is a triplex, which you can’t cope with replacing on your own. Triplex is mounted exclusively on the factory floor and is so expensive that it is cheaper to buy and install new door.

Option one (simple)

In domestic veneered economy class doors, glass is simply placed on top. In this case, we breathe a sigh of relief, measure the “vacated” opening with a tape measure or centimeter, go to the workshop, order new glass - and carefully insert it. Lubricate with silicone gel; dries - remove smudges with a cloth.

An important point: do not forget to climb with a ruler inside the cell in which the glass stood and measure the depth necessary for its fastening. Usually it is a centimeter or two. But if it is not added to the length and width of the future purchase, it will have to be repeated.

Option two (also "economy class")

It happens that the glass is fastened with a glazing bead with decorative nails. In this case, you can also cope with its replacement on your own. We sigh with relief, measure with a tape measure ... (See the first paragraph of the text in the previous subheading. The second, however, also does not interfere with re-reading). The only difference is that after the broken or cracked glass is removed, the glazing beads are removed, and when a new one is inserted, they are put back and nailed with the same carnations that were originally there.

Option three (collapsible)

Suppose you have collapsible business class doors. This option is more difficult. The door will have to be taken apart. To do this, the bolts under the rivets are unscrewed from the sides of the door leaf, from below and from above. The main difficulty is to assemble the door back: distortions are possible!

Option four: if the glass is irregularly shaped

Even standard rectangular glass can be inserted when there is some experience in this matter. If it is oval or generally zigzag ... It is important to guess with the size so that you do not have to buy it again and again. It is better to take the dimensions of the broken glass onto cardboard. But the work must be jewelry. Tolerance from the exact dimensions should not exceed 3-5 millimeters. And when using paper for removing patterns, it can reach 7 millimeters ...

In fact, there are many more options. Almost as many as manufacturers of interior doors. In laminated ones, for example, sometimes the glass is attached to a glazing bead, which cannot be seen from the outside. Such a door cannot be repaired at all; it is not the glass that will have to be replaced, but its entirety.

But laminated though inexpensive. It will be a shame if you take up the repair design door and finally break it down ... So if you are not sure of your glazier's abilities, it is better to call the master. Or buy a new door. Because there is some oddity here: branded door repairs will almost certainly cost you more than installing a new one.

Video: how to cut glass with an ordinary glass cutter

Replacing glass in an interior door is not considered a particularly difficult task, but it must be done accurately and accurately. A fragile insert requires skills in handling the material and appropriate tools, so it is better to order cutting from specialists. Trading construction organizations provide such services directly when buying glass decor.

Glass inserts are most often changed for the following reasons:

Broken glass must be removed, even if it did not fall out. A sudden movement when closing the curtain will lead to possible injury to people.
The aging of decorative inserts is reflected in their appearance and also often leads to replacement.
Installing glass doors in your living room is an easy way to freshen up your interior. The repair option includes only the replacement of glass in the canvas or changing the size of the frame.
The glass insert may be accidentally soiled or scratched. You can replace the glass if it's easier than putting it in order.

preliminary stage

To repair a damaged door with a glass panel, you need to preparatory work. Before installing a new insert:

remove protruding fragments from the frame (most often they are easy to remove with little effort);
remove the canvas from the hinges and lay it on a flat surface;
inspect the door and try to determine the method of mounting the insert;
if the glass is not broken, then dismantle it.

In old apartments, glass was inserted into the door frame using putty. To repair interior doors and replace broken glass, you need to pry off the glazing bead holding the insert with a knife or screwdriver. After that, pull out the nails with pliers, remove the glass part and clean the opening from the remnants of paint and putty.

To work, you need to prepare tools:

glass cutter;
a hammer;
small nails;
silicone sealant.

It is often necessary to replace the glazing beads. You can buy them at hardware store, in the lumber department.

Kinds

Doors are glazed with different types material:

transparent - often complemented by pasting with decorative films with drawings imitating stained glass;
matte - rarely requires additional finishing;
with a pattern, corrugated and stained glass - are decorative species glass, it is better to entrust their cutting to specialists;
tinted or mirrored.

Material selection

Frosted or corrugated glass is used where the view of the room from the outside is undesirable: in the bathroom, bathroom, bedroom. These types of material are thicker than transparent window glass: it reaches 4-6 mm. House master not always be able to cope with cutting on their own. Therefore, after dismantling the old glass, it is recommended to measure the opening for insertion and order a replacement in the workshop of a construction company.

For the living room, decorative glass for doors is more often selected: with an engraved pattern, made using complex technology and surface treatment with a sandblasting unit, stained glass, consisting of colored pieces connected together. If desired, you can use both corrugated and frosted glass, if the interior design is not particularly luxurious or is made in a minimalist style.

Both transparent and any other can be installed in the kitchen. A budget option- simple window glass pasted over with a film, or decorative curtains on a glazed structure.

Options to replace

If it is not possible to quickly insert decorative glass into the door instead of the broken one, there is an option to replace it with other materials. For temporary insertion, you can use:

plywood or fiberboard, pasted over with a film that fits the veneered surface of the canvas;
plexiglass ( monolithic polycarbonate);
window glass with stained glass film.

These materials are not the best decor for the door, so in the future you will have to make repairs again and insert new glass into the opening.

How to replace glass in an interior door

In economy class doors, the insert is removed and installed from above, through a special groove. Silicone sealant serves as a sealant: do not forget to clean the frame well from its remnants. Before replacing the glass part, you need to find out its dimensions.

glass in inexpensive models It has a rectangular shape, so it is enough to determine the dimensions of the glass opening in terms of width and length. When taking measurements, it is important not to forget about the allowances that are needed to fasten the insert in the grooves. Measuring the allowance is simple: slide the ruler into the groove. Add the resulting value to the length and width of the opening.

It is advisable to cut the glass as precisely as possible so that it easily fits into the mounting gaps. Before installing the glass in the interior door, fill the grooves with sealant.

doors more complex design to replace the glass will have to be disassembled. To do this, you need to find bolts on the sides, closed with special decorative plugs. By unscrewing the bolts, you can remove part of the canvas and remove the insert. Measurements to be made taking into account allowances.

When inserting glass into a kitchen door with a panel, the craftsman must find the dowels at the top and lower parts canvases. They need to be removed and 1 side of the frame removed. Pull the glass panel out of the groove, take measurements and cut out a replacement part. Assemble the structure reverse order. Put the dowels on the glue.

How to insert rectangular glass

Rectangular inserts can also be found in interior or kitchen doors old apartments, and in expensive products in new buildings. Inserting glass into an old-style door is easy:

after dismantling the glazing bead and cleaning the recesses, measure the opening taking into account the groove;
cut a rectangle to size and insert it into the opening, applying a little sealant there;
install the glazing bead in place and secure with nails.

Inexpensive plastic, laminated and veneered products come with inserts on fasteners with glazing beads. In such a case, the repair is carried out as indicated for the old-style doors, removing the strips along the perimeter of the opening on only one side of the door. It is advisable to keep the nails that fasten the bead and use it when installing the planks in place. To prevent rattling of the newly inserted glass, before the procedure, silicone sealant should be applied to the recess between the blade and the slats.

Options for doors of complex design sometimes include non-removable fasteners: a groove with hidden wedges. Such a product will have to be taken to the workshop for a branded replacement: it is impossible to do it yourself. According to user reviews, repairing a complex structure with hidden fixation is more expensive than buying another door, so it makes sense to ask a sales assistant for details in advance.

Installation of non-standard forms yourself

Manufacturers produce unusual models of doors with glass complex shape. They are beautiful, but their repair will not do without the help of a specialist. Do-it-yourself replacement of glass in an interior door should be started by inspecting the fastening of the insert: if it is too complicated, then you should immediately call the master to the house. But if there are removable elements, as a rule, you can replace the insert yourself:

Remove the door from its hinges and place it on a sheet of cardboard. Its size should be sufficient to completely close the opening.
Outline the opening as accurately as possible, do not forget to allow for installation allowances.
The template must be cut and tried on in the opening. It must fit exactly the size of the frame.
A template for glasses of complex shape must be taken to the cutting workshop.
It remains to put the finished parts into the grooves, smeared with sealant, and secure with decorative overlays.

in sliding structures

A sliding door can consist of a large glass sheet and a thin frame around the perimeter or look like a swing door: with inserts in wood or plastic panel. In any case, the canvas must be removed from the awnings and laid on the floor. To extract heavy object from the grooves of the profile to slide the sashes, an assistant will be required.

If the door consists of a frame and glass, then you will need to disassemble it completely. Bolts can be found on the edge of the framing structure and removed. The edge of the glass is protected by a silicone seal, which must be removed and stored if not damaged. If the integrity of the material is violated, it is ordered together with glass door.

Take measurements along the length and width of the canvas. It does not shatter into fragments, but only becomes covered with cracks, so it is easy to cope with the task. When ordering glass in a workshop, you need to specify that a material with protective film(or triplex, as for car windows). After receiving the ordered product, it remains to insert it into the frame, after putting the seal on the edges. When mounting, cut off the silicone tape so that it is 5 mm smaller than the glass on each side.

When installing glass element between MDF panels the canvas is collected on a horizontal surface. To install glass, linings are most often used, which are attached to nails. When mounting the insert and driving small fasteners into wooden door you need to be careful not to break the glass: one wrong move will lead to a second repair. Raise the assembled web and install it in the profile skids for sliding door.

Interior doors are often decorated with additional decorative elements, you can often see the decor in the form of a glass insert. But when using low-quality glass inserts or improper and careless operation of the door leaf, it may be necessary to dismantle this fragile part. We will talk today about how to properly replace glass in an interior door.

How to remove cracked glass?

Replacement of broken or cracked glass in an interior door begins with its removal from the door leaf. The greatest difficulties arise if the glass insert is cracked, because it must be removed in such a way that the glass does not crumble into pieces during dismantling.

It is best to perform all work after the door is removed from the hinges and laid on a flat horizontal surface. If this is not possible, it is necessary to open the door and fix it securely at the bottom so that the door leaf does not wobble during operation.

On the cracks themselves, it is necessary to glue a transparent strong adhesive tape in several layers on both sides of the glass. It is very important at the same time that the adhesive tape also captures its intact part. Such a manipulation will fix the glass and prevent it from falling apart during the dismantling process.

You will also need:

gloves, best rubberized on a fabric basis;
broom and scoop;
chisel;
several pieces of thick paper;
small hammer.

All work must be carried out with gloves, this will help protect your hands from damage. The further procedure for removing cracked glass will consist of the following steps:

It is necessary to establish how exactly the glass insert is fixed in the door leaf. It can be brought in through the end or fixed with glazing beads.
If the glass is installed through the end, then the door will still have to be removed from the hinges. It can only be removed through a special hole.
If the insert is fixed with glazing beads, then using a chisel and a hammer, they must be slightly moved to the side. There is no need to completely remove these fasteners.
Then the glass is slowly removed from the canvas. It is better to perform this operation with two people, especially if the insert is large. One person will have to hold the glass at the location of the cracks, while the second will carefully remove it from the door.
It is necessary to clean all grooves of sawdust, door putty or sealant.

The dismantled insert should be disposed of immediately after wrapping it in prepared paper. If in the process of work a piece of glass broke off, it should be carefully swept in the room.

There are no particular difficulties in performing such work. The main thing is to immediately prepare all necessary material and take action slowly.

Worth paying attention to gum condition, which is located between the glazing bead and the glass itself. If it is severely damaged or torn, it must be replaced with a new one.

What can be replaced?

After removing the cracked glass from the canvas, a new insert must be installed in its place. Many people have difficulty choosing suitable material for replacement. Before proceeding to the description of possible alternative inserts, I would like to say that sometimes you can just fix broken or cracked glass with the following options:

A special decorative film in cases where a crack or chip is small. It is glued to all the glass at once, so that the door looks harmonious and complete.
Sheet fiberboard. This option is temporary and can only be used until a new glass is selected. To improve the appearance, it is also recommended to paste over the temporary insert with a decorative film.

For the final replacement of cracked glass in the door, you can use other materials:

Ordinary glass. This material does not have any decor of its own, it is completely transparent, widely available and low price. When choosing this option for a replacement, it becomes possible to decorate it in any way in the future.
Organic glass has high level strength, and it is very difficult to break it, but at the same time, scratches on such material appear quickly enough. You can eliminate this drawback with the help of a decorative film, which will decorate the door itself and protect the insert from minor damage.
Decorative (stained glass) glass. This replacement option is the most stylish, beautiful and expensive. An insert made of such glass is distinguished by its unusual appearance and high strength. True, you will need to spend a lot of time choosing the right one for you. general style interior drawing. Some varieties of this material will not be possible to install at home.
The tempered glass, differs in the increased durability, fire safety and a noise isolation.

There are quite a few materials to replace old cracked glass. It is worth giving preference to the one that most accurately fits not only in its own technical specifications but also in appearance.

How to paste with your own hands: step by step instructions

The installation of a new decorative part in the door leaf should not begin with the work itself, but with measurement. It is necessary to accurately determine the size of the future insert. When performing measuring work, you need to remember that the glass itself should not fit too tightly into the grooves, otherwise it may burst again from strong pressure.

To install a new insert, you will need the following equipment:

sealant;
small nails;
a hammer;
glue;
rubber insert.

The replacement itself is quite simple in several steps:

The sealant is applied on one side of the door leaf in special grooves for glass.
The newly acquired insert is inserted into the elastic and then installed into the grooves. Glue glass and wood directly without using such rubber seal it is possible, however, such an installation will be unsafe, and the glass itself will not be securely fixed in the grooves.
Sealant is applied again, but on the other side of the door.
After 5 minutes, the previously removed glazing beads are installed. If necessary, they should be securely fixed using special small nails.
The door leaf must be left stationary for another couple of hours. During this time, the entire structure is completely fixed inside the door.

You can glue glass into a wooden door not only using a sealant, but also a special wood or universal glue. The application of sealant also remains a mandatory part, but this stage is performed after the installation of the glass.

It is best to do this work after removing the door from the hinges. This installation option is the simplest and is suitable for ordinary glass rectangular shape.

The very technology of performing the work can also be used for other types of inserts installed not only in ordinary doors, but also sliding or collapsible ones.

If the glass is located in the side door, and it is not possible to remove the leaf itself from the hinges, then it is necessary to fix the door leaf firmly in such a way that so that it does not move during operation.

How to change in the royal door?

In addition to ordinary interior doors, today you can also find side doors, which can also have a damaged glass insert. The side door leaf differs from the usual one in that it has special reinforcement bars that securely fix the structure itself in doorway. The replacement of the insert in such a door will be carried out as follows:

It is necessary to remove the door from the hinges, using a screwdriver and removing the plugs first. Loosen the bolts with inside loops.
The door leaf is laid on a flat horizontal surface located above the floor level.
Using a ruler or chisel, it is necessary to remove the remaining plugs located along the edges of the canvas.
Remove fasteners with a screwdriver.
With a hammer and wooden block it is necessary to disconnect the drawer along the entire perimeter from the door itself. The direction of movement is from bottom to top. It is necessary to start removing the drawer from the place where the fasteners were located.

After detaching the drawer, it is necessary to carefully remove it from the canvas and, wearing gloves, remove the cracked glass from the grooves along with the silicone seal.
We measure glass and purchase replacements.
But we put on a new insert and insert it into the grooves.
We install the tsargi in place.
Now you need to assemble and install the entire canvas in the reverse order of the analysis of the structure.

Replacing glass inserts in a tsargovy door is considered more difficult than the work performed on ordinary interior doors, so it should be approached very responsibly and carefully.

How to fix shaky glass in the apartment?

The glass in such door panels does not always crack or break. Much more often you can hear that it just starts to stagger a lot and make loud and unpleasant sounds. There are several ways to solve this problem without replacing the decorative insert:

You should purchase a special "sanitary" sealant, which is applied in a thin strip into the cracks formed between the insert and the tree.
Ordinary matches, one at a time, are inserted into the corners of the glass panel. Instead, you can use acrylic putty, which is also applied to the corners of the insert.
Small pieces of cork are liberally lubricated universal glue and around the perimeter of the glass are inserted into the slots.
You can also carefully remove the glazing beads themselves, apply sealant to the glass, and reinstall them on top, but closer to the decorative panel itself.

All these ways to eliminate noise and glass movement in the doors really help get rid of the problem, and their implementation does not take much time.

Installation options

There are two main ways to replace glass in interior doors, and each of them, in turn, has two varieties:

Installation of a new insert with preservation or increase in size. In the first case, cracked or broken glass is removed and a new one of the same size is installed in its place. Such work is considered the simplest and fastest.
In the second case, after dismantling the damaged insert on the door leaf, he draws an image of a new one with a pencil, then measurements are taken, and then glass of a suitable size is purchased. Cut with a hacksaw desired shape holes, special grooves are made in it and only then installation takes place. Such work requires special care in measurements and caution when cutting. new form in the door, otherwise you can only spoil all the material without solving the problem.