Silicone grease for rubber seals. Universal silicone grease: instructions for use. We select silicone grease for seals Caring for rubber bands in plastic windows

Despite the fact that modern plastic windows are made of quality materials and provide proper comfort, they are not immune from damage, wear and tear. This applies to all elements of products, including rubber seals. An inconspicuous element protects the house from drafts, prevents the ingress of moisture, dust, and reduces street noise. But seasonal temperature changes, humidity, dirt destroy rubber components. How and with what to process the sealant plastic windows to make it last longer? For this, there are special solutions.

Why care for sealants?

The rubber elements of PVC windows are elastic and are located along the perimeter of the light opening. Due to the close contact of the sashes with the frame, they are subjected to cyclic compression loads on a daily basis.

No matter how good the element is, over time it will wear out and lose its functions. In production, to delay the unpleasant moment, a lubricant is used for rubber seals, enveloping them with a thin film.

After a couple of years of operation protective layer goes away completely, and the user has to solve the problem himself. To this end, he needs to purchase some kind of solution for the care of rubber objects.

Features and types of professional tools

A self-respecting supplier of plastic windows has in its product range kits for the comprehensive care of PVC products. Similar products are offered by Robitex, KBE and EdelWeiss, but the first products for rubber components were produced by the German company Fenosol.

The special liquids sold by the listed companies are safe for humans and animals, non-toxic and biodegradable. The main ones include:

FenoFLEX.

The brainchild of the Fenosol company is supplied in 50 ml tubes average price 500 rubles. It does not contain alcohol, which has a detrimental effect on rubber.

General purpose silicone grease.

Low viscosity product that lays down in an even layer and prevents the effects of moisture. Colorless, odorless substance with heat resistance from -50 to +230 degrees. It can be found in the household or hardware store, it costs about 100 rubles.

WD-40.

A unique liquid for all occasions, which has found application in the field of PVC windows. Mineral oil (the main component of the mixture) coats waterproofing film silicone window seal. The hydrocarbons included in the composition lower the viscosity. The WD-40 package is complemented by a convenient tube that allows you to apply the substance exactly along the length of the seal. The price of 100 ml of the product is 80-100 rubles.

The quality of the listed lubricants for the care of rubber seals is highly rated by consumers, however, even among professional tools There are more affordable alternatives.

Household care products for seals

If it is not possible to purchase imported products, you can get by with what you probably have in everyday life. Among them stand out:

Colorless, odorless, viscous liquid. It is used in cosmetology, acts as a by-product of saponification of fat. From the point of view of chemistry, glycerin belongs to alcohols, however, the experience of use says that it is safe for PVC windows. It is available - in a pharmacy you can buy 25 ml of the substance for 10 rubles. The bad thing is that it poorly protects the rubber from the effects of precipitation, quickly washing off.

Petrolatum.

Well softens rubber, covers it with a dense colorless layer. It is insoluble in water, therefore it is good as a waterproofing agent. Vaseline has two disadvantages:

It has low frost resistance (-25 degrees).
Melts at a temperature of +27 degrees.

This substance will not last long, but Vaseline - good alternative products that contain alcohol. You can buy it at a pharmacy; 75 ml will cost 30 rubles.

Proper processing of rubber elements

Buying the right product is not enough - it is important to know the key aspects of caring for rubber seals. The user should follow the tips below:

it is necessary to take care of PVC window elements made of rubber twice a year - before winter and summer;
first, the seal is cleaned - wiped with a damp cloth, sponge, then with a dry cloth;
if the seal has petals, they are lubricated first, then the rubber on the outside;
when using viscous products, use brushes of different thicknesses;
after lubricating the sealant, it must be allowed to dry for about an hour, after which the window sashes can be closed.

no more easy way extend the life of PVC windows than regularly lubricate rubber seals with high-quality alcohol-free solutions. The user, spending only 20 minutes annually on the care of the elastic elements, will increase the durability plastic construction several times.

https://www.youtube.com/watch?v=WRT4ej5Al9k Video can "t be loaded: Plastic window care tips (https://www.youtube.com/watch?v=WRT4ej5Al9k)

Rubber is used in many household structures: various hoses, seals, adapters, car parts. Over time, products made from this material fail, dry out, lose elasticity, and become inconvenient to use. You should not immediately buy new elements, you can try to soften the rubber at home.

Remanufactured rubber part using kerosene

Rubber elements under impact external factors lose their original properties, become less elastic, harden. Their further use will not bring the desired effect, seals, for example, will not be able to make the system completely sealed. The purchase of new rubber elements is sometimes difficult due to the lack of products the right sizes or their overpriced.

The following substances allow you to soften rubber:

Kerosene. Allows you to make rubber parts soft by affecting the structure of the material. After processing, the rubber element becomes fully elastic. Recovery technology is as follows:

fill a small container with kerosene (choose the container size depending on the size of the product to be restored);
place the part in a container with kerosene for 3 hours;
after the specified time, check the product for softness, if the result is satisfactory: remove the material and rinse with warm running water;
dry the material in a natural way, without using a hair dryer or battery.

Alcohol ammonia. The process of restoring old material is as follows:

dilute the indicated alcohol with water in a ratio of 1: 7;
place the rubber material in the resulting solution for half an hour;
after the specified time, remove the part and rinse with warm running water;
Allow the parts to dry completely before using them.

Please note: you can not keep the rubber in a solution of ammonia and water more than an hour. If the material does not become elastic after 30 minutes, use another recovery method.

Medical alcohol followed by the use of glycerin. The technology of "reanimation" of rubber parts:

fill the container with medical alcohol;
put in alcohol a part that needs to be restored for several hours;
after the specified time, check the condition of the product, if it is soft enough, remove the element from the solution and wash it with warm soapy water;
rub glycerin into the surface of the part using a sponge (cloth);
remove any remaining glycerine from the surface of the product.

Instead of glycerin, it is allowed to use automobile oil, it is rubbed into the surface of the product, then the part is kept for half an hour before use. During this period, the rubber becomes sufficiently elastic.

Castor oil and silicone. Let's make a reservation right away - this method allows you to quickly "reanimate" the old rubber, but the recovery effect will not last long, after a few days the product will become solid. For this method, follow the sequence:

smear the part with silicone;
wait 10 minutes;
after the specified time, the part can be used.

Note: a similar effect is achieved by using castor oil. It is rubbed into the surface of the part, after which it becomes soft and elastic.

Heating is an effective method

Container with prepared water for boiling rubber products

There are situations when the rubber element is difficult to remove from structural parts due to its hardening. You can achieve the desired result by heating the rubber with a stream of hot air using a hair dryer. When exposed to high temperature, the material will become softer, it can be pulled out of the part.

Too "hardened" element is softened by boiling in salted water. The technology is as follows:

fill the container with salted water;
let the liquid boil;
place the rubber element in boiling water for 10 minutes;
remove the rubber and quickly use it for its intended purpose.

This method is quite effective, but has a short-term effect. When it cools down, the rubber becomes stiff again.

Conclusion

You can soften the rubber in the above ways. In this case, it is necessary to take into account: a long-term effect after restoration, has a method with kerosene. Rubber, after its application, remains soft and elastic for a long time, because the structure of the material changes. Other methods do not allow to achieve such a result.

To in winter period the driver had no problems opening the doors, you need to prepare for frost in advance and process the door seals special composition. The best option is a lubricant for car door seals which prevents the rubber seal from freezing.

In general, silicone-based lubricant is universal remedy, which not only protects rubber seals and other surfaces, but is also used to solve many other problems. Its use greatly increases the life of many decorative and sealing elements in any car.

Spraying rubber seals

Grease used for rubber seals provides protection of elements from cracking, aging, winter freezing. In addition, this tool improves tightness, heat and sound insulation.

But it is precisely the versatility of the available properties of silicone-based lubricants that allows them to be used for almost all rubber and plastic parts of a car. Silicone is ideal chemical properties, including water repellency and the ability to protect parts from mechanical damage. The operating temperature regime of such products is in the range from -50ºС to +250ºС. But regardless of the temperature environment, the viscosity of silicone greases does not change.

This allows you to use silicone for car doors and other elements at any time of the year: in winter - to prevent the sealant from freezing to the body, and in summer - to prevent drying out and destruction of rubber parts.

Benefits of sealant lubricants

We noted above that silicone for car doors is resistant to both low and high high temperatures . And this is its main advantage! Thanks to a special carbon composition, which was developed to preserve certain elements, silicone-based lubricants have indispensable properties - resistance to low temperatures.

Gelling rubber seals

Of course, if it is impossible to use special agents for lubricating rubber elements, you can use technical petroleum jelly, which has similar properties, but differs from silicone in a shorter duration of effect. In addition, glycerin may be suitable, which softens the rubber, prevents it from cracking and freezing.

But lubricants are most effective on silicone base which have a number of significant advantages:

versatility of tools and ease of use;
increased environmental friendliness of the lubricant;
low cost;
antistatic properties, which prevents the accumulation of dust on the rubber elements;
increased moisture repellency.

Considering the ease with which condensate crystallizes at negative temperatures, which leads to freezing of sealing rubbers, an increased ability to repel moisture can be considered the most important property in winter.

Varieties of lubricants

When wondering how to lubricate rubber bands, you need to have an idea of \u200b\u200bwhat what types of lubricants are available to motorists today and what are the advantages and disadvantages of each type. This should be told a little more.

Paste products

These are thick plastic mixtures applied with napkins. Pasty means are used in the processing of automotive rubber seals, diving equipment and home household appliances. The disadvantages of such lubricants include the difficulty of lubricating hard-to-reach places.

Gel products

This type of lubricant has a thick or liquid consistency and is applied to parts with a soft cloth. The advantages of thick funds include the fact that untreated parts remain clean. While their disadvantage is the impossibility of application in hard-to-reach places. Liquid gel-like agents are used to treat complex devices, since, on the contrary, they easily penetrate into hard-to-reach places. The disadvantage of liquid gel-like products is their ability to spread, but sometimes this becomes their clear advantage.

Aerosol products

These tools are easy to use. They are used for surface application. large area and small parts in hard to reach places. The disadvantage of aerosols is excessive spraying. leading to contamination of neighboring elements. To reduce splashing, you need to use special long nozzles. In addition, with insufficiently thorough rubbing, aerosol products form fatty spots.

Aerosol sealant treatment

Conditioner "Very Lube"

This product is in the form of a spray, which is intended for the treatment of rubber and plastic surfaces. It promotes color restoration, anti-aging protection. The spray has excellent cleaning properties, penetrates deep into small cracks and scratches, and filling them cleans them of dust and dirt accumulations. The use of such a product helps to restore the original color and gloss, improve the aesthetic appearance of rubber surfaces, protect against fading and cracking, and prevent freezing of rubber seals on doors, hoods, and trunk. The only downside to spraying is that it doesn't last. protective coating. This increases the need for their use.

Penetrating lubricant «NanoProTech»

Today, lubricants of this type have become very popular. They are have ideal moisture-proof, anti-corrosion, lubricating and penetrating properties. Prevent freezing of moving parts at temperatures down to -80ºС. Grease recommended for use on rubber seals. It guarantees reliable protection against moisture, improves the condition of the rubber elements and their stable operation. The tool has many advantages:

contributes to the formation of a waterproof and water-repellent protective layer, which pushes out moisture;
filling microscopic cracks and depressions;
lubricant retains elasticity for a long time;
does not destroy materials;
does not dissolve in water and does not form an emulsion;
the composition of the product does not contain rubber, silicone, teflon, etc .;
the product is not affected by external factors;
it is safe for humans and nature;
resistant to mechanical stress;
operating temperature range from -80ºС to +160ºС;
the period of preservation of protective properties up to three years.

Treatment door hinges

Application

Automotive lubricants have wide range applications.

Door seals

Lubricants are widely used to prevent the occurrence of cracks and wear of the sealing elements of doors, hood, trunk. Experts recommend regularly treating these elements with silicone-based lubricants. This contributes to maximum sealing and the absence of extraneous sounds in the cabin. In addition, such lubricants are used to treat all kinds of moving parts and surfaces.

Using silicone spray, door hinges and side window grooves are processed. For easy sliding of the hatch and reduction of loads on its surface, such processing prolongs the service life.

In addition, all surfaces treated with such means receive protection from wear and damage, corrosion and external factors.

Lock mechanisms

Regardless of the make and model of the car, all vehicles have a decent number of locking mechanisms. All of them are exposed to external factors and mechanical wear. For example, condensate, accumulating in winter in the secret of the element, freezes, which makes it difficult or obstructs the opening of doors, hood, trunk and other parts equipped with a lock. To prevent this needs to be lubricated regularly the mentioned mechanisms.

Using the nozzle for hard-to-reach places

Silicone-based lubricant prevents icing. Excellent penetrating characteristics contribute to the easy penetration of the product to any hard-to-reach places. Teflon, which is part of the composition, creates an invisible protective layer on the surfaces of parts. This prevents corrosion and various oxidations.

Silicone is highly resistant to saline solutions, alkalis and weakly aggressive acids.

Plastic elements

Plastic parts in the car interior (dashboard, door cards, etc.) are often emit extraneous noise, in order to prevent this, it is recommended to use these chemicals.

A silicone-based lubricant does an excellent job of this. Lines of contact and joints treated with silicone grease stop making any noise. Also, with the help of these compositions, any plastic elements can be processed, this gives them shine and thereby changes the look of the cabin.

suspension parts

Suspension parts made of rubber are exposed to harmful foreign microparticles. Moisture, dust or sand, getting on the parts, act on them like abrasives which leads to their rapid wear. In winter, to reduce the effect of aggressive compounds and reagents on suspension parts, it is also advisable to treat it with a protective agent. Today, all kinds of silicone-based lubricants are on sale, focused on protecting metal parts of the body and chassis from negative influences that cannot be avoided by operating a car.

Lubrication of rubber door seals

Control Details

Silicone lubricants extend the life of the pedal bushings and levers. Moreover, aerosols are great for applying to cables. To do this, the agent is blown into the protective casing of the cable, using a special thin nozzle, having previously disassembled it.

This treatment promotes good glide and protects against moisture / dust.

What to choose

The basis of silicone lubricants for rubber seals is mixing poly-methyl-siloxane solution and propylenes with the addition different type polymers. The differences between the means are almost impossible to discern. All of them give excellent results in terms of moisture repellency and lubrication.

The main differences between these products are the presence or absence of smell, convenience in the process of processing and application. workers temperature conditions also differ slightly (ranges -30°C-+200°C and -50°C-+250°C). The solvents that are contained in such products are easily weathered, so they dry pretty quickly.

Treatment of hard-to-reach places

To determine the type of lubricant, it is necessary carefully read the instructions for use and those. parameters. It is preferable to treat glass seals with a paste or gel-like agent; for the hood / trunk, gels and aerosols will be the best option.

The quality of lubricants is determined by their expiration date, manufacturer's rating and price - a poor quality composition can have a low cost.

All components of the system that use liquids - oil, refrigerant, grease for power steering, transmissions - are equipped with sealing elements. The presence and operability of seals helps to prevent leakage Supplies. However, to ensure correct operation sealing components of the part must be periodically lubricated. From this article you will learn what are the pros and cons of silicone grease for rubber seals and what such products are produced in.

[ Hide ]

Composition and functions of matter

Lubricating silicone for cars in the form of an aerosol or gel is an artificial substance developed on the basis of organic and inorganic materials. The base of the product is silicone oil or lithium grease and other elements such as hydrocarbon solvent, propellant, etc. Thickeners may be used in the grease.

What are the requirements for the substance?

must be compatible with the material from which the sealing elements are made, as well as the spare parts adjacent to them;
product performance is maintained over a wide temperature range;
the substance must reliably protect the rubberized elements from rapid wear and cracking;
the treatment of parts with lubricant should lead to a decrease in friction;
one of the main requirements is that the product must provide a separating effect, that is, after its use, the parts should not stick together;
when processing sealants, the substance should increase the tightness of the joint;
the product must be resistant to water, so that the substance does not wash off as a result of contact with lubricated parts.

The main functions of the substance:

Recovery. The use of the substance should ensure the preservation of the elasticity of the processed elements. If the parts become soft during operation, the product must quickly restore elasticity, functionality and appearance seals.
Insulating. Lubrication protects the rubber elements from water.
Lubricant. The treatment of parts with a substance allows the sealing elements to better adhere to various surfaces.
Protective. It consists in ensuring the durability of the service life of parts. The lubricant must not only prevent water from attacking the seals, but also prevent corrosion from forming on metal components. High-quality lubricants do not allow dust and contaminants to enter the structure.

Lubrication of door seals

Substance properties:

Increased adhesion.
Lubricant does not negative impact on the surfaces being treated.
Bioinertness. Due to this property, bacteria and harmful organisms cannot normally exist in a silicone environment.
Increased dielectric as well as antistatic characteristics. This allows the product not to pass voltage and current through itself.
Elasticity. One of the main properties.
Product resistance to oxidative reactions. Allows you to increase its service life and provide reliable protection details.
Good anti-friction features.
Environmental friendliness. The use of lubricant will not harm human health and the environment.
Durability. Quality products are characterized by a long evaporation period.
Fire resistance. The substance will not flare up even when working at elevated temperatures.
Resistant to alkaline elements and weak acidic compounds.
The lubricant is odorless and colorless. Due to this, its use will not spoil the appearance of the parts. In some cases, food manufacturers add flavorings to the composition of substances.
The ability of a substance to transfer heat well.
Wide operating temperature range. Due to its composition, silicone grease can retain all its properties and characteristics when operating under extreme temperatures. On average - from 50 degrees below zero to 200 degrees heat.

Types and forms of release

Briefly about the varieties and forms of product release:

Paste. Thick lubricant in the form of a paste is easy to use. The main disadvantage of such a substance is that when using it, the car owner will not be able to process hard-to-reach places. We are talking about locks, hinges on doors, etc.
Gel. Not much different from pasta, except for the consistency. The gel is more liquid.
Liquid. The use of liquid lubricant is relevant in complex mechanisms. The main disadvantage of the substance is that it can spread.
Spray can. This type of lubricant in the form of a spray is easy to use. But it is best used for processing large surfaces. During operation, the spray will scatter in different directions, if the manufacturer has not provided for the presence of a special tube in the kit. The use of lubricant can lead to its contact with the hands and clothing of a person, as well as surfaces that should not be treated. The substance in the form of an aerosol needs to be rubbed during application. Otherwise, greasy spots may remain on the surface.

User Big Boys Toys in his video told how to properly use the lubricant.

Overview of lubricants

Lubricants may differ from each other in terms of application, as well as the presence of certain odors. Temperature ranges will vary by product.

Presented on the market big choice silicone lubricants for rubber seals, consider the most popular substances.

WD-40

One of the most famous products, comes in the form of a spray. Initially, this type of lubricant was intended to remove corrosion on metal parts of a car.

In the course of use, other useful features. These include:

perceptive ability;
creating a protective layer to prevent the negative effects of moisture.

In fact, WD-40 allows you to increase the resource of using rubber elements. If the substance comes into contact with polystyrene or polycarbonate, then it destroys these compounds. When using WD-40 lubricant, care must be taken not to allow it to come into contact with mucous membranes.

Glycerol

Characterized by:

low solidification temperature;
high hygroscopic characteristics.

Therefore, glycerin can be used to protect rubber seals. As a result of processing, the lubricant softens the rubber and makes it elastic, which helps prevent cracking. The disadvantages of the product include the fragility of its action. For high-quality surface treatment, the car owner will have to periodically use lubricant.

Very Lube

It is used for processing plastic and rubberized parts and elements. The use of lubricant allows you to restore the color of the components, as well as protect them from rapid wear. The main feature of the product is the presence of detergent characteristics. Lubrication allows you to penetrate deep into scratches and microcracks, performing and cleaning from contaminants. Due to the restoration of the original color, the substance improves the appearance of rubber products. Lubrication prevents cracking of parts and prevents them from freezing in the cold season.

The main disadvantages include the fragility of the protective coating. The motorist will often use lubricant.

Nanoprotech

The lubricant has gained great popularity among consumers due to its characteristics:

waterproof;
anti-corrosion;
penetrating;
lubricating.

The use of substances helps prevent freezing of seals on moving parts and mechanisms. The product performs well when used in the Far North, since its freezing temperature is -80 degrees. The substance completely pushes moisture out of microcracks on the treated surface. Its use allows you to keep rubber seals elasticity. Plastic, metal parts, paintwork is not destroyed as a result of using Nanoprotech. The use of a lubricant prevents the formation of an emulsion. This product does not contain rubber or Teflon.

Rezin

As a result of application, the lubricant forms a polymer layer that provides water-repellent characteristics to rubber products. The temperature range is from -50 to +50 degrees. Lubrication is considered all-weather, so it can be used at any time of the year. One of the main features of the product is the high content of silicone in the lubricant.

Compared to other sprays, its volume in the Rezin base is five times larger. Due to the presence of a special dispenser in the form of a sponge in the kit, it is convenient to use for processing hard-to-reach places. When used, the lubricant does not flow out, it is not washed off with water. Since this type of product is not an aerosol, it does not settle in the air during use, does not irritate human mucous membranes, and does not settle in the lungs.

step up

The product is produced by a well-known company from the USA, engaged in the production of automotive cosmetics. The lubricant is characterized by good water-repellent characteristics. Its use allows you to protect rubberized parts and elements on the doors and windows of the car, as well as components in the trunk and engine compartment of the car from rapid wear. The operating temperature range varies from -50 to +200 degrees. Included with the spray is a thin tube that allows you to treat even the most hard-to-reach surfaces.

Eltrans

The product is produced by the Russian company of the same name. Lubricants of domestic production are designed to protect plastic and rubberized elements. The use of the substance ensures the creation of a protective coating on the parts, which not only improves their appearance, but also protects against the negative effects of water and frost.

A distinctive feature is the addition of an aromatic additive to the composition of the lubricant, as a result of which the product does not have bad smell. According to consumer reviews, the main disadvantage is the lack of a tube in the kit, which makes the use of the substance impossible for processing hard-to-reach parts.

Liqui Moly

The Liquid Moli company produces Silicone-Fett and Silicone-Spray products. Reviews and numerous studies show that this manufacturer's lubricant is of high quality. Thick substances are supplied to the market in special tubes, their use is relevant for processing door hinges. Sprays have penetrating characteristics, which provides protection for parts located in hard-to-reach places. The product kit does not include the handset. The temperature range of use is from -40 to +200 degrees.

Molykote Dow Corning 200/1000

Belgian products made in the form of aerosols. Helps prevent the negative effects of water on rubber and metal elements car. The lubricant effectively protects seals even at critically low negative temperatures. Molykote Dow Corning 200/1000 is considered one of the best in terms of strength and durability compared to other lubricants.

Turtle Wax

Designed specifically for processing rubber and plastic elements. Turtle Wax can also be used to lubricate metal as well as textile components and parts. The substance is considered universal and allows you to reliably protect and isolate the rubbing parts of the car from the negative effects. In the cold season after washing vehicle Turtle Wax prevents rubberized seals and gaskets from freezing, displacing moisture from them and significantly reducing the coefficient of friction. Also, the tool effectively insulates high-voltage cables and cover switchgear ignition systems if there is high humidity outside.

Silicot

Water-repellent substance produced by a Russian company. The temperature range of use varies from -50 to +230 degrees. The lubricant is characterized by an average level of viscosity, its use is more relevant on large surfaces and parts. Also means possesses high adhesion. Belongs to the category of universal products.

MS Sport

This remedy Russian production characterized high content in the composition of the substance of silicone with fluoroplast. Due to this, the operation of MC Sport is allowed in pairs, that is, in nodes where one of the components is made of steel or other metal, and the other is made of plastic, rubber, leather, etc. The use of the product is allowed not only for processing machine parts, but also in everyday life.

The structure of this lubricant is semi-solid, so its operation is possible in bearing devices and other lightly loaded rolling and sliding mechanisms. Studies have shown that the product effectively protects machined parts from the effects of dirt, rust and liquid. MS Sport has water-repellent characteristics. This lubricant does not pass current through itself, is not washed off under the influence of water and effectively removes squeak. Due to the formation of a frost-resistant layer on the surface of parts, the substance prevents the effects of corrosion on car elements.

Applications of the material

Lubricants can be used not only for processing automotive parts, but also in everyday life.

Using the product in a car

What parts of the machine can be lubricated:

plastic interior parts, for example, control panel or center console;
the substance is used for rubber bands and seals on car doors, luggage compartment, hood, windows, fuel tank caps, etc.;
hinges and locks on car doors;
starters;
electric wiper blade motors;
guide bushings on seats, ventilation hatches, as well as power windows;
rubber elements of wiper blades;
end parts of machine tires;
disks on car wheels;
rugs;
bushings of stabilizers, pillows fixing the exhaust pipe, cooling system hoses, silent blocks, etc.;
places on the car body where the paintwork has broken off, this helps to prevent the formation of corrosion in the future;
plastic bumpers of cars, if scratches began to appear on their surface;
seat locks in the cabin;
seat belts.

From the video filmed by the Autochemistry and Autocosmetics channel in Kyrgyzstan, you can learn about the use of lubricants.

Features of the choice of lubricant

When buying a product, you must be guided by the following criteria:

Price. Very cheap products usually cannot boast good performance and high quality.
Availability. It is important that in the city where you live, there is a store where, if necessary, you can quickly buy the substance.
The main criterion is quality. We recommend purchasing lubricants only in trusted and certified stores. If the seller operates without a license, it is quite possible that he will buy low-quality and counterfeit products and pass them off as originals.
Lubricant type. When choosing a type, you need to decide for what purposes the product will be used. Spray on hard to reach surfaces. In other cases, you can buy a paste or gel.
Pay attention also to specifications. They are listed on the product label. Taking into account technical properties and features, you will be able to choose a quality product that is suitable for fulfilling your goals.
Substance manufacturer. The products described above have proven themselves in front of our compatriots. We recommend choosing lubricants from famous brands so as not to purchase low-quality material.

You can learn about the use of the lubricant in the video filmed by the bushkraftell channel.

What can be replaced?

Silicone grease is a universal product that does not make sense to replace with other substances. The issue of replacing the product is faced by motorists who, for some reason, cannot buy a lubricant in stores. In such cases, instead of silicone agent you can use Litol-24.

How and how to wash silicone grease?

To answer this question, you need to familiarize yourself with the composition of the product. If the lubricant accidentally gets on clothing or glass, do not try to wipe it off immediately. This will lead to greasy spot on the surface will only increase. Depending on the composition of the substance, a solvent is selected that will help remove unwanted traces of the liquid.

How to remove traces of silicone grease for rubber seals:

If the main element in the base of the substance is acid, then vinegar (70% solution) will be required to neutralize the traces. A clean rag is wetted with vinegar, which is subsequently treated with a contaminated surface. After processing, you must wait at least half an hour. Then acetic acid wiped off with a rag.
If the product has alcohol base, then an alcohol solution is required to remove traces of grease. It can be purchased at a pharmacy. The use of technical or denatured alcohol is allowed. In its absence, you can use vodka. Dampen a rag in the solution, then wipe the surface with it until the cured silicone is removed.
The base of the substance can be oximes, amides and amines. In such cases, gasoline, any alcohol-based solvents or white spirit can be used to remove traces of contaminants. To remove silicone, the place is processed, after which you have to wait half an hour. If you could not remove the dirt the first time, then repeat the procedure.

Learn more about removing silicone from different surfaces, as well as clothes, you can find out from the video filmed by the Miss Purity channel.

If you are removing grease with vinegar or acetone, wear rubber gloves. The use of acetone is not always allowed, it all depends on the composition. Be careful, as this product can damage the paintwork on the car body. In some cases, traces of silicone grease can be effectively removed with glass cleaner and ammonia. If necessary, you can use special tool"Antisilicon", but its use is not relevant for all types of lubricants. The best option- go to the car wash. Experts, after listening to your problem, will select the best silicone stain remover or shampoo.

Advantages and disadvantages

Advantages of silicone grease for seals:

Product versatility.
Safety from an environmental point of view.
Most of the products on the market are characterized by high quality as well as performance.
Affordable price for most consumers. It should be noted that the price range of silicone lubricants is quite large. Each consumer will be able to buy a product based on their financial capabilities.
Large range of substances. You can purchase products designed specifically for rubber parts or for plastic parts.
Water resistance of lubricants. Even when exposed hot water high-quality lubricants are not washed off.

Cons are typical for certain types of lubricants. The main disadvantage for many products is the need for regular use. Often, lubricants quickly lose their function after application, so the car owner has to periodically reuse them.

How to lubricate the rubber seal of plastic windows

Care products offered by the chemical industry As we said at the very beginning of the article, such products are sometimes offered by window installers. They are usually included in PVC window care kits. The main disadvantage of such sets is their high cost. It usually starts with ten thousand rubles. Silicone lubricants are much cheaper. The list of their names is quite large, and you can buy them in construction, automotive and hardware stores. When purchasing such a lubricant, you need to make sure that it is really intended for rubber. If there is no such mark on the bottle, the product can cause great damage to window gaskets.

Motorists will certainly want to use the widely used WD-40 fluid. And they will be right: the mineral oil, which forms the basis of this product, creates on the treated surfaces protective film waterproofing. The price of WD-40 is one third less than the cost of silicones. Enough canister for a whole dozen years, even if the seals are regularly treated with this product.

People's experience

Professional tools are, of course, good. However, human experience has shown that the rubber seal can be treated with a more affordable agent. Such a tool is known to all glycerin. Its disadvantages include a low level of water resistance. But in the case of seals, it does not play any role: these elements window construction rarely exposed to prolonged exposure to moisture.

Glycerin, most likely, refers to cosmetics. Therefore, it may suggest using some cosmetic creams. Don't ever do this! Additives, flavors and additives can be the ultimate sanction for rubber products. What not to use when lubricating window seals First of all, you should know that the rubber seal will not stand if it is treated with solvents or substances containing alkalis or alcohol. Knowing the mistakes often made by users, we would like to specifically warn you against using the following substances: edible oils- it is absolutely impossible to process seals with them; petroleum jelly, which is not glycerin at all. Its application can cause cracking of the gum (real men know this very well!); baby powder can cause the seals to dry out. So, remember that the rubber window seal PVC needs care. Only in this way is he able to serve long enough, effectively coping with the task assigned to him. To care for it, you should always use those substances that are compatible with rubber products.