Electric heating systems from the world-famous manufacturer Electrolux based on cable heating products and special heating mats are mainly reassigned for comfortable space heating by heating the floor surface, under which the heating system is actually mounted.
Note that the premises in which you can organize an effective electric heating floors can not only be residential, but can also be used for efficient and energy-efficient heating of public and office spaces.
Electrolux underfloor heating instructions, the installation of which will be given below, does not require mandatory installation in sand concrete screed, it is enough to lay cable products or a heating mat in a pre-prepared tile adhesive solution.
Advantages of underfloor heating over radiator heating
The manufacturer took care of the compactness of its products and when laying the heating system for heating the floor surface, the level of the latter rises to the minimum.
Initial stage: planning
On the initial stage, implying the organization of such a heating system for rooms as Electrolux underfloor heating, the instructions of which are included with this equipment, it is necessary to plan future installation work.The algorithm for such planning is quite simple to begin with:
- Conduct an audit electrical wiring in the room in which this heating system for high-quality and uninterrupted connection. To do this, the power indicators of all devices that can be connected to the mains during operation of the heating system are summarized. It is also necessary to take into account a variety of devices that can also be connected, but are not required to be permanently connected.
- Underfloor heating Electrolux, installation of which must be carried out by a specialist, and having a power of more than 2 kW, is recommended to be connected via a separate machine to a specially output wiring. In addition, it is desirable to connect through the RCD (nominal response rates are not higher than 30 mA).
- Before styling heating mat or cable products, it is necessary to measure the resistance of each of the elements of the system (data on this are recorded in the warranty card). If everything is in order, then the recorded parameters must correspond to the factory ones (indicated by the manufacturer in the instructions).
- The next step is the most important - this is the drawing up of the layout of the heating electrical system for underfloor heating. Note that the distance between the system and other heating appliances, walls or communication ties should be at least 30-50 cm.
Laying the heating system: features
- Before laying such a product as Electrolux warm floors, the installation of which is quite simple, nevertheless it is better to entrust it to specialists, you should first prepare the surface: remove pointed objects, excess construction garbage, as well as irregularities to provide a smooth base for cable or heating mat installation.
- Further, the location of mats or heating cable products is determined, taking into account the features of the geometry and the room, as well as the furniture located in it.
- Also, do not forget where the temperature sensor and thermostat will be placed.
- Further, underfloor heating Electrolux installation involves the placement of heating elements directly - after they are placed, make sure that the wires temperature sensor and power cables do not touch each other.
This is important to consider
- We turn Special attention to the fact that strictly prohibited use different kind extension cords or independently build up wires, these actions significantly reduce the safety of system operation and can cause an emergency.
- Heating products must be installed smooth side on the base, after which the product is adjusted according to a previously made scheme.
- If it is necessary to obtain the desired shape of the mat, it is possible to cut the product only in those places of the heating structure where there is a frame fabric.
- directly myself heating cable cut it is forbidden, as this will violate the integrity of the heating system.
- The distance between the heating elements must be the same, but not less than 5 cm.
- When installing an electrical heating system for underfloor heating, overlapping heating elements should not be used.
Electric heating systems from the world-famous manufacturer Electrolux based on cable heating products and special heating mats are mainly repurposed for comfortable space heating by heating the floor surface, under which the heating system is actually mounted.
It should be noted that the premises in which it is possible to organize efficient electric floor heating can be not only residential, but can also be used for efficient and energy-efficient heating of public and office premises.
Electrolux underfloor heating instructions, the installation of which will be given below, does not require mandatory installation in a sand-concrete screed, it is enough to lay cable products or a heating mat in a pre-prepared tile adhesive solution.
Advantages of underfloor heating over radiator heating
The manufacturer took care of the compactness of its products and when laying the heating system for heating the floor surface, the level of the latter rises to the minimum.
Initial stage: planning
At the initial stage, which implies the organization of such a heating system for rooms as Electrolux underfloor heating, the instructions for which come with this equipment, it is necessary to plan future installation work.The algorithm for such planning is quite simple to begin with:
- Conduct an audit electrical wiring in the room where this heating system will be installed for high-quality and uninterrupted connection. To do this, the power indicators of all devices that can be connected to the mains during operation of the heating system are summarized. It is also necessary to take into account a variety of devices that can also be connected, but are not required to be permanently connected.
- Underfloor heating Electrolux, installation of which must be carried out by a specialist, and having a power of more than 2 kW, is recommended to be connected via a separate machine to a specially output wiring. In addition, it is desirable to connect through the RCD (nominal response rates are not higher than 30 mA).
- Before styling heating mat or cable products, it is necessary to measure the resistance of each of the elements of the system (data on this are recorded in the warranty card). If everything is in order, then the recorded parameters must correspond to the factory ones (indicated by the manufacturer in the instructions).
- The next step is the most important - this is the drawing up of the layout of the heating electrical system for underfloor heating. Note that the distance between the system and other heating devices, walls or communication links must be at least 30-50 cm.
Laying the heating system: features
- Before laying such a product as Electrolux warm floors, the installation of which is quite simple, however, it is better to entrust it to specialists, you should first prepare the surface: remove pointed objects, excess construction debris, as well as bumps to provide a smooth base for laying cable or heating mat.
- Further, the location of mats or heating cable products is determined, taking into account the features of the geometry and the room, as well as the furniture located in it.
- Also, do not forget where the temperature sensor and thermostat will be placed.
- Further, underfloor heating Electrolux installation involves the placement of heating elements directly - after they are placed, make sure that the wires of the temperature sensor and power cables do not touch each other.
This is important to consider
- We pay special attention to the fact that strictly prohibited use various kinds of extension cords or build wires yourself, these actions significantly reduce the safety of system operation and can cause an emergency.
- The laying of heating products should be carried out with a smooth side on the base, after which the product is adjusted according to a previously made scheme.
- If it is necessary to obtain the desired shape of the mat, it is possible to cut the product only in those places of the heating structure where there is a frame fabric.
- Directly cut the heating cable itself it is forbidden, as this will violate the integrity of the heating system.
- The distance between the heating elements must be the same, but not less than 5 cm.
- When installing an electrical heating system for underfloor heating, overlapping heating elements should not be used.
The fact that the feet must be kept warm has been known since the time of Ancient Rome. Then in public baths, as well as in private households, the floors and each room in the room were heated using special systems. It was a stove that was located outside a residential building. From her warm air passed through a system of channels under the floor, as well as into the walls. Thus, all rooms from all sides were very efficiently heated. This principle has not been forgotten and is being used now, but modern systems have a slightly different design. For example, a modern warm floor from the Electrolux company heats any floors very efficiently, and the application special technologies prevents the creation of vortex flows and allows you to distribute heat in the room more correctly.
modern underfloor heating
Nowadays, ovens are no longer used, which were once popular in Ancient Rome. Today, for floor heating, a heating system built into the floor based on a special heating electric cable is used. except high efficiency such a system, it has great potential for energy savings.
In most apartments, cable systems are used. For urban conditions, they are the most optimal. Here you can trace the golden mean between the price and the complexity of the installation. As for comfort, there are practically no competitors here. With the help of a liquid heat carrier that is pumped through pipes, it is very difficult to achieve the effect that electrical systems give.
Warm floors allow for a much more comfortable distribution of heat flows. While the radiators central heating heat the air, and then it goes up, the heat from the floor remains below, and then rises to the level of the person’s head, thereby creating optimal conditions for a person. Also, among the advantages, there is a smaller amount of dust that rises as a result of the action of conventional flows, which is important for those who suffer from allergies.
Underfloor heating systems are equipped with sensors, as well as temperature control systems, which can significantly save on energy resources. When using such systems, an average of about 20% of electricity is saved.
Features of electric underfloor heating
There are several types of underfloor heating systems. So, there are cable, rod and film models. The difference between them is in the complexity of installation, as well as in the base where they will be laid. As for the principle of operation, these are either convection or infrared heating elements.
Heated cable electric floor is often produced in the form of special sections, mats, or in the form of a cable on a reel. When making a choice, many people face the question - which cable is the best?
There are two types of cable used. It can be single or double stranded. To answer the question of which cable is better, you need to understand a little.
The element can be ordinary (resistive), with a constant very high level of resistance. Its main task is to convert electricity into heat. Naturally, any cable one way or another, but converts part electric current into heat, but this is only about 3%. Heating cables are capable of converting about 100% of electricity into thermal energy. Also, in some systems, a self-regulating cable is used. It has special properties due to which it can regulate the current passing through it.
Like single core cable, and two-core have almost the same efficiency. For example, Electrolux offers a warm floor built on a two-core cable.
System Components
In addition to the cable in such systems, there are also other, no less important components. This is a thermostat and sensors. Experts recommend for various premises select and install individual thermostats. This ensures a more comfortable use of the system.
The thermostat or thermostat has one function. It is responsible for turning the heating element on or off. It is also designed to maintain the temperature set by the user. At the right time, the device, based on the data received from the sensor, will turn on or turn off the heating element.
Choosing a thermostat for underfloor heating
There are only two types of these devices. So, there are simple devices or with the possibility of programming. Before choosing, it is necessary to decide whether there is a need to automatically turn on or even turn off the heater according to a given program.
Simple devices can only do primitive things - turn the system on or off. Often, this functionality is enough for comfortable operation. The user will independently turn on the equipment. Depending on the cable used in the system, the heating time can take from 15 to 20 minutes. These devices do not have the ability to disconnect the cable or reduce operating temperature at night or when the user is not at home - the programmable ones have these functions and they allow significant savings.
Equipment from the industry leader
Electrolux is known to many for household appliances which is of high quality. But this is not the only area of work. For 16 years, this manufacturer has confidently held its leading position in the market for underfloor heating and other electric heating systems.
The company already has enough wide range of models. Warm floors are presented in various options. So, both cable sections and heating mats which greatly simplifies installation. The company also released a large series of thermostats.
Advantages of systems from Electrolux
A real breakthrough in technology, as well as great experience allows the company's engineers to create high-tech equipment that can significantly increase the level of comfort in apartments and private households.
The cable core from this brand is very durable. Aramid threads are used as the material. This is a special high-strength synthetic-based fiber. Steel is 5 times less durable than aramid. The material is used for the production of body armor, in the production car tires and many more. This material significantly improves cable performance.
The core insulation is made of PTFE. Here, high wear characteristics, as well as fluoroplastic, are distinguished by high electrical strength. This insulation allows you to guarantee maximum reliability even with significant overheating.
The basis of a heating mat is created on the basis of unique textile material. Also, for extra strength, it is impregnated with a special adhesive composition. This ensures not only strength, but also excellent adhesion in the screed. The structure of the mat is homogeneous.
The lineup
Among the many options for organizing a warm floor, Electrolux specialists offer heating mats as perfect option. These mats are based on very thin electric heating elements.
When installing such systems, there is no need to fill the screed. Also, installation does not require any special knowledge or skills. Such mats can be installed under absolutely any floor coverings. Also, the absence of a screed will not steal space in the room. For installation, you only need to correctly calculate all the parameters, and then, based on the results, you should select a set of necessary and suitable equipment.
Not only engineers recommend Electrolux underfloor heating. Users leave positive reviews about company systems. So, the reviews talk about the rapid heating of the floor surface, as well as the ease of installation due to the self-adhesive mat.
EasyFix Mat: simplicity and savings
According to the manufacturer, the EasyFix series of systems is one of the most economical and profitable solutions for organizing “warm floors”. The series is represented by a two-core thin cable.
Installation is as easy as ever. It is enough to unfold the heating mats on required surface and fix them securely. For this there is special compound. Then it is recommended to check the integrity of the structure with a multimeter, and then, if everything is in order, you can connect the warm floor to the thermostat. Next, you can proceed to the installation of flooring. This system does not take up much space - the floor will rise only 10 mm.
Innovative textile base Multi Size Mat
The solution was created on the basis of a special stretchy base made of textile materials. The unique material allows the mat to change its length up to 35%. Also, this design allows you to adjust the power and laying area. In addition, the shape can also vary. This is very important when there are various obstacles in the way of a warm floor in the form of thresholds, furniture or built-in appliances.
cable sections
The Electrolux company also offers cable equipment. These sections are designed for installation in a concrete screed. A series of systems is great for rooms with complex configurations. The installation process takes place with a certain laying step. You can also adjust the power of the warm floor.
One such section is the Twin Cable. This, according to the manufacturers, is a real full-fledged heating system. It alone is enough to create the most comfortable microclimate in the premises. The difference of this system is in a special cable. Both cores heat up, and the voltage between them is distributed evenly. What does the consumer get as a result? Efficient heating at minimal cost energy. Also, the heating rate with such sections is quite high.
The thermostats are the only part of the system that can be seen and used. All devices from the company have a nice design and a wide range of functions. Engineers have created several series of equipment. Thermoregulators are equipped with all necessary sensors and light indication.
In all series, except for the initial one, thermostats are equipped with a display on which all system parameters are visible. Also, the device implements intelligent algorithms. Any parameter can be programmed.
Whatever consumers choose, any type of Electrolux product is invariably high quality and security. Any equipment is fully certified, and the warranty for underfloor heating systems is 20 years.
Such systems are very economical. In this they differ significantly from traditional heating devices. Underfloor heating is chosen for high comfort, simplicity and reliability. And underfloor heating from Electrolux is chosen for excellent quality from professionals and industry leaders. User reviews have already confirmed the excellent performance of the equipment.
As a rule, in winter time years, indoors they walk in slippers or wool socks. This trend continues in those rooms where the temperature is above 20 degrees, since modern radiators do not provide full heating of the room. But progress does not stand still, and today, using the warm floor of Electrolux, you can forever forget about the cool flooring in your room.
Warm floor Electrolux unique basis from gloss
Heated floors from Electrolux have been known not only throughout the country, but also abroad for several years. This incredible success was made possible primarily by innovative technological developments, allowing to produce products that provide the maximum level of comfort in the room. But let's go in order...
The heating cord of the warm floor consists of a heavy-duty core, which includes aramid threads. As a rule, aramid is more of a high-strength synthetic fiber, but if you draw a parallel between it and steel, then the strength of aramid will be five times higher. That is why the use of this substance several times increases the resistance of the cord to breaks or stretching.
Important! The cores are insulated with fluoroplastic, which provides them with high wear resistance and electrical strength.
Besides hallmark heating mats lies in the fact that their base is impregnated with a special adhesive, which not only creates ideal conditions for adhesion, but also prevents bubbles.
Attention! The structure of the mat is completely homogeneous.
Advantages
Warm floor electric Electrolux It has a number of advantages, the main ones being:
- Uniform and rapid heating of all areas in the room.
- Self fixation.
- Durability.
- Resistant to heavy physical exertion.
- Wear resistance.
Mounting
As practice shows, one of the most available ways to make your flooring warm - the use of heating mats with a base of thin cords, which are fixed on a self-adhesive base. In addition, it should be borne in mind that their installation is not only very simple (since a concrete screed is not required), but also does not require special skills or knowledge. All that is needed is to deploy and fix the mat. Make sure that the cable resistance is present and connect the thermostat for the Electrolux underfloor heating. Then it remains only to put this coating and enjoy the comfortable temperature of the flooring.
Application
As practice shows, it is possible not only to use the Electrolux warm floor under tiles, but also under other cold coatings. In addition, it has proven itself well in combination with laminate and parquet. But in this case, it is necessary to remember the observance of elementary safety rules.
Common installation errors
The ancient Romans knew that feet should be kept warm. They provided in the floors and in the walls public baths and in their households special systems that served for heating. These were special ovens that were built outside the building. When they were kindled, warm air flowed through an extensive system of channels into each room. At the same time, all rooms of the building were very efficiently heated.
A similar principle is used today. Only modern systems have a completely different design. For example, underfloor heating "Electrolux". With their help, you can effectively heat the surface, made of any material. At the same time, the use of special technologies does not allow the creation of vortex flows, which contributes to the correct distribution of heat in the room.
Modern designs
Nowadays, builders no longer build stoves, so popular in ancient Rome. Today you can heat the floors with special system heating, the main element of which is electrical cable. In addition to high efficiency, this design is distinguished by a great opportunity to save energy.
Cabling systems are the most the best option for city apartments. It is they who allow you to find the golden mean between the complexity of the installation and the price. It is worth noting that floor heating systems in which a liquid heat carrier is pumped cannot give the same effect as electric ones. Indeed, in the latter of them, a more comfortable distribution of the available heat flows is ensured. In addition, such systems emit a small amount of dust that rises during the action of conventional flows. This is very important for someone who suffers from allergies.
The design of any underfloor heating system provides for sensors, as well as devices that control the temperature. This allows you to achieve significant energy savings.
Types of warm floors
Electric systems for heating floor surfaces can be cable, rod and film. The difference between these types lies in the complexity of installation. In addition, they are laid on different base. According to the principle of operation, these floors can be either convection or infrared. It all depends on what type of heating element is provided in their design.
Cable electric floors intended for heating are produced in different types. These are, as a rule, special mats, sections or a cable located on a reel.
Main elements of the system
Heated floors "Electrolux" are built using a two-core cable, which is one of the main components of the system. However, apart from it similar designs contain other important components. So, according to experts, when installing underfloor heating in a room, it is better to select and install separate thermostats. Such devices will guarantee a comfortable use of the system.
The thermostat or thermostat is designed for one function. He is responsible for turning the heating element on and off, as well as maintaining the temperature set by the user.
Industry Leader
Many buyers know the Electrolux company by household appliances that differ the highest level quality. However, the release various devices to facilitate domestic work is not the only direction in the company's activities. This manufacturer has been considered one of the leaders in the market for various electrical systems heating, including underfloor heating. The company offers consumers a fairly extensive range of models it produces.
Heated floors "Electrolux" are presented in different options. Among them are cable sections and heating mats, which, according to user reviews, can greatly simplify installation work. In addition, the company offers its customers a large series of thermostats for underfloor heating "Electrolux".
Innovative cable
Warm floors "Electrolux" have a number of advantages that distinguish them favorably from similar products of competing firms. The experience accumulated by the company, used in combination with innovative technological achievements, has allowed its specialists to create a unique series of products that sets new level comfort and quality.
One of the advantages that the electric floor heating "Electrolux" has is the use of a super-strong core made of aramid threads in its design. This core is the basis of the heating cable.
Aramid is synthetic fiber, which has a high thermal and mechanical strength. This material is used in the manufacture of fire-retardant clothing, bulletproof vests, as well as for reinforcing tires. Such responsible areas of application of armid were chosen due to the fact that it is five times stronger than steel.
How does it work given material in a cable? Armide strands significantly increase its resistance to tensile loads, bending fractures and tearing. For example, such a cable will not be damaged even if a breaking force of 200 N is applied to it.
Use of durable insulating materials
What else compares favorably with the warm floor "Electrolux"? Reviews of experts say that the company chose fluoroplast as the material for insulating its heating conductors. It distinguishes wide range mechanical properties, high dielectric strength, low wear rates. Fluoroplastic insulation has the most high performance reliability and safety, which makes it possible to increase the resistance of the cable to local overheating.
Innovative textile base
Reviews of specialists who install and maintain Electrolux underfloor heating indicate another important advantage of the systems of this company. It is the use of a unique textile base for heating mats. This base is impregnated with a special adhesive that prevents the formation of air bubbles in the mat.
Heating cable strands are woven into the unique textile. This ensures the creation of a single structure of mats.
Installation Features
According to experts, it is not at all difficult to mount the Electrolux underfloor heating. The instruction attached to such a system says that for laying heating mats it is not necessary to pour a concrete screed, as well as calculate the laying step and cable power. It does not require any special knowledge. When laying underfloor heating "Electrolux" you only need to decide on the heating area and choose the most suitable model for the room.
Another advantage of the company's heating mats is the uniform and rapid heating of the entire floor surface, as well as self-fixing of the installation due to the adhesive layer.
Simplicity and savings with Easy Fix Mat
This series is the most simple and profitable solution when organizing underfloor heating. The Easy Fix Mat uses a thin two-core cable.
How is the installation of this warm floor "Electrolux"? Reviews of specialists and owners who make repairs in their apartment on their own indicate that the installation of such a system does not cause any particular difficulties. To equip a warm floor, simply unfold the mat, and then fix the floor covering on the floor using a self-adhesive base. On the next step the instruction for the warm floor recommends checking the resistance that the heating cable has, and only after that connect the system to the thermostat.
Further, an adhesive solution is laid on such a system, on top of which a floor covering is arranged. Such a warm floor-mat "Electrolux" is ideal for those rooms in which it is necessary to equip floors with a minimum level rise (up to 10 mm). The company offers a wide range of models of this series, which will allow you to heat small room, whose area does not exceed 12 square meters.
Lay Easy Fix Mat - warm floor "Electrolux" - under the tile, as well as under a natural stone using tile adhesive. The arrangement of such a system is also possible in those premises where, as floor covering used laminate, carpet, linoleum and parquet. In this case, the heating system must be laid on a screed.
Elastic Multi Size Mat
This underfloor heating model is innovative solution from Electrolux. The basis of this design is a stretchy textile, thanks to which the length of the mat can be changed from 10 to 35 percent of its parameters. The uniqueness of this design provides the ability to adjust the laying area and system power. By stretching and bending the Multi Size Mat, you can also change the shape of the mat. For example, it can be not only the usual rectangular, but also trapezoidal, diamond-shaped, etc.
At the same time, a warm base can bypass any obstacle without any problems. According to user reviews, this property of a warm system is very convenient for installation, which is carried out in rooms that are non-standard in terms of their parameters. These can be, for example, bathrooms, hallways and kitchens equipped with stationary large-sized appliances.
Lay this warm floor "Electrolux" under the tile. User feedback suggests that even in cases where the shape and laying area differ from those planned in advance, this will not cause any problems for such a design, because the Multi Size Mat underfloor heating mat can stretch up to thirty-five percent of its original length. In this regard, the power of the system, calculated per unit area of the room, will also change proportionally. This allows you to lay such a warm floor "Electrolux" under the laminate and other floor coverings.
cable sections
This is another one of classic varieties warm floors from the Electrolux company. As a rule, cable sections are laid in a leveling concrete screed. Such installation is carried out at the stage overhaul or construction.
Cable sections are used in rooms with a complex configuration. By their own technical specifications such warm floors allow you to lay the heating cable with a certain step. This allows you to set required power design, which can range from 120 to 200 watts per square meter.
One of the cable section models is Twin Cable warm floor. According to experts, it can be considered a real full-fledged heating system. One such section is quite enough to create the most comfortable microclimate in the room.
The main difference between the Twin Cable system and existing analogues lies in its cable. Its basis is two cores, both of which are heating. In addition, the voltage arising between them is distributed quite evenly. Due to this feature, the consumer receives efficient and fast heating of the room, and due to the minimum load - low energy costs. When arranging the cable section, the heating rate of the room is also quite high.
Temperature controllers
As one of its key missions, the Electrolux company sees a solution to the issue of simple and comfortable control. warm floors. The thermostats are the only visible part of the system. With their help, you can control the warm floor.
The highest achievement of the company is the Thermotronic range of temperature controllers. It includes:
1.Thermotronic Basic. This is a series of underfloor heating "Electrolux", which has mechanical control. The unit comes with a floor temperature sensor. The Thermotronic Basic thermostat has the ability to set the limit of minimum and maximum temperatures, maintaining the set parameters at a constant level.
2. Thermotronic Avantgarde. This is a stylish series of electronic programmable thermostats equipped with a round liquid crystal display. Rubberized, pleasant to the touch buttons located on it allow you to set any temperature conditions indoors depending on the time of day and even every hour.
3. Thermotronic Touch. The company equipped the programmable thermostats of this series with a touch display that can be programmed for a week with the ability to set six time periods during which you can set different temperature. The device has a lock function that protects the display from accidental pressing.
It is worth emphasizing that the Electrolux underfloor heating controller and all other products of the company have been certified in accordance with international European standards and security requirements. At the same time, the manufacturer has set guarantee period for thermostats - three years, and for heating mats - twenty years.
Loading...