In the summer, the grass on the site can tighten and turn into a neglected field, even the most beautiful lawn. To prevent this from happening, the grass must be constantly trimmed or mowed. This is a difficult and long task, when only the old proven “grandfather's” braid is at hand. Using mowers for a walk-behind tractor, you can turn this unloved activity into a simple and exciting hobby. Mowers for walk-behind tractors will facilitate your work and help turn the design of your site into beautiful place recreation. And also help without special efforts cut grass for hay for cattle.
What models of mowers are
Among the large range of attachments for walk-behind tractors, mowers are the most popular both in large farms and in small ones. household plots. Of course, you can not only buy a mower for a walk-behind tractor, but also make it yourself. But do not rush to make such a unit yourself. First compare the price and evaluate the lineup already finished products. I assure you that the low prices for these devices will pleasantly surprise and delight you. And you can pick up a finished model on any website of an online store that offers this technique in a large assortment and at different price categories.
When choosing, you need to evaluate the landscape of your site. The vegetation in each area is different in its composition of herbs, density and height. It is for this reason that two types of techniques have been developed by technicians:
- Rotary (disk) mower for walk-behind tractor.
- Segment (finger) mower for walk-behind tractor.
Each type of these units has both disadvantages and advantages.
The rotary mower of the company "Zarya" developed and manufactured at the domestic plant "Kaluga engine" has low price and high reliability. There is an analogue of this model of the Chinese manufacturer RM-1. If your site has low vegetation and low shrubs, grass, crops, then these models will delight you with their productivity. Rotary models are suitable for flat terrain or with slight slopes of 15-20 degrees. The side slope of such mowers does not exceed 8 degrees. The disadvantage of rotary mowers is a high injury hazard. Grass after mowing with such mowers fits into rows, and this makes it possible not to rob it in the future.
The design of disk technology is simpler, which reduces its breakdown. Rotary models are aggregated with motoblocks: Oka, Neva, Ugra, Cascade, MB-2M, Agros and the like. For the Salyut walk-behind tractor, separate modified mowers are produced.
When working with a rotary mower, you need to watch carefully so that the knives do not touch the stones. This will cause them to break or may warp or even damage the entire appliance. Not to mention that the stone, shattered into fragments, can harm you.
Important! When working with rotary models, the mandatory use of tools personal protection(goggles and gloves).
The new mower designed for the Neva mower, the Zarya-1 mower, has been modified and has its own advantages over other models. The mower for the Neva walk-behind tractor and the like has a height adjuster from 3 to 10 cm, which will make it possible to use it both to tidy up the lawn and use it as a lawn mower. This model does not have a transmission belt, which reduces the complexity of maintenance and repair. Due to the latest equipment of the mower for the Neva walk-behind tractor, high quality mowing and the formation of smooth shafts. The mower has been modified with "skis" to make it easier to mow on uneven surface. And the drums for pushing grass make it possible to mow the thickest and coarsest vegetation up to 1m high.
Segment mowers
Segment (finger) mowers are widely used. The most popular domestic models of such equipment are KM-0.5 produced by Mobil and Swift KNS-0.8, produced by Moscow Avtomash. The segmented mower for a walk-behind tractor is aggregated with equipment: Neva, Salyut, Mb-2M, cascade and similar models.
The knives of the segmental model move back and forth due to the action of the motor shaft. Due to the specifics of their design, rotary units are more difficult to maintain. But they have a number of their advantages.
The lateral location of such a device eliminates the pressing of already cut grass, as with rotary mowers. And the cutting elements “fingers” move during operation and repeat the landscape of the soil. This makes it possible to mow the grass almost at the very root. And the deviation of the knife mechanism mounted in the design by 20 degrees makes it possible to work on the most uneven types of soil. The mechanism itself for turning the unit on or off has no connection with the walk-behind tractor drive. This will make it possible to freely turn off the model in the most emergency situations. Knives in segment technology work in a balanced way, which makes it possible to reduce vibrations in the knife blade to a minimum.
The most popular models, the average price in Russia
We present to your attention the most famous models of mowers for walk-behind tractors.
This is a rotary model aggregated with motoblocks of the MB type: Neva, Kadvi, Oka, Cascade, Tselina and other similar ones. For motoblocks: Agro, Belarus, MB-90 and the like, an additional bracket or gearbox must be used during installation.
The model is designed for grass with a rough or hard structure. Suitable for mowing small shrubs and grain crops. After mowing, the grass is laid in rows, which excludes its robbery. The width of the mowed area is from 70 to 80 cm. The labor productivity of this crumb is 0.2 ha / hour. This model weighs 33 kg. Available distinguishing feature: can work even on soil with stones and anthills.
You can buy it from the manufacturer or in stores of similar equipment. average price in Russia from 12 to 14 thousand rubles.
This is a modified model of the Zarya mower. Well cleans shrubs and grass of hard and tough crops. It is aggregated with motoblocks: Neva, Cascade, Oka, virgin soil and the like. The mass of the structure was reduced to 28 kg. This lightweight model makes it possible to mow grass in the most inaccessible places.
The labor productivity of this technique is 0.2 g/hour. Grass cutting width 80 cm.
You can buy such equipment from the manufacturer or in specialized stores. average cost in Russia from 14 to 16 thousand rubles.
KNS-0.8 Strizh
This is a model of finger technology for a walk-behind tractor. Suitable for motoblocks: Neva, Tu1, Salyut, Cascade. The labor productivity of this model is 0.25 g/hour. The grip width of the knives is 80 cm. It weighs 35 kg. Max Height cut grass 2 cm.
It is best to buy from the manufacturer or in attachment stores for walk-behind tractors. This unit costs on average in Russia from 15 to 20 thousand rubles.
KM-0.5
This is a compact model of a finger mower aggregated with walk-behind tractors: Hitachi S169, MKM, Salyut, Neva, Favorit. Due to its small dimensions (77x62x44.5 cm), it is popular with summer residents. The grass cutting height of this mower is 0.5 cm. 
The width of the captured mowing area is 50 cm. This technique weighs 35 kg.
You can buy in Russia in specialized equipment stores. Since the manufacturer is in China, it is not advisable to purchase from a supplier. The mower costs from 11-14 thousand rubles.
Mower prices may vary depending on the season. AT winter time manufacturers present discounts, and it will be profitable to buy a mower for a walk-behind tractor. Of course, you can buy it in the season, but then it is unlikely that you will be able to save money.
Before you buy a mower for a walk-behind tractor, ask the seller to visually show you each model, talk about its advantages. Ask for a quality certificate for this product. As attachments for a walk-behind tractor this is a sought-after product, you can easily encounter fakes. To prevent this from happening, use the services of trusted and reputable companies with a good reputation in the market for these products.
Motor-block mower Mobile K KM-0,5 Terminator - mechanical means, which, complete with a walk-behind tractor, is used for mowing and chopping short grass.
Mower KM-0.5 Terminator is suitable for Salyut and Agat motoblocks.
Peculiarities:
Rotary principle mowing.
The bottom of the mower has 2 knives 25 cm long. This type of mowing is the most efficient.
Knives are made of high strength steel with the use of high frequency currents, which ensures durability, and also frees the operator from the need to sharpen knives.
Adjustable cutting height.
Due to special skids, the cutting height is adjustable from 5 mm to 10 cm.
Mulching grass.
Due to the very high rotation speed of the blades, all grass is mulched.
The mower is not afraid of falling stones, branches, earth, etc.
The parts are made of high-strength steel using laser cutting.
All parts of the mower are produced on an automated machining center using a laser and virtually without human intervention.
Powder coating.
All elements of the mower are painted in a powder chamber, using the latest technology.
As a result, the coating is durable and has an attractive appearance.
Design features of the mower for the KM-0.5 motoblock:
In the new modification of the mower, the control tensioner It is carried out on the steering wheel of the walk-behind tractor and carried out with the help of a cable and a clutch handle.
The knives are made of high-quality structural steel and hardened with high-frequency currents, which gives them additional strength and allows you to mow not only grass, but also weeds, shrubs and even young trees.
Characteristics of the mower Mobil K KM-0.5 Terminator
| Capture width | 50 cm |
| Grass cutting height | up to 50 cm |
| cutting height | from 5 mm |
| Working speed | 0.5-4 km/h |
| Weight | 35 kg |
Warranty repair of goods presented in our store is carried out FREE OF CHARGE by authorized service centers of the respective manufacturers during the entire warranty period.
Addresses and conditions for warranty obligations service centers manufacturer will be reflected in the warranty card sent to you simultaneously with the goods.
Warranty terms:
The warranty applies only to manufacturing or material defects, assemblies and assemblies. The warranty period begins on the date of purchase by the first retail purchaser or first commercial user and lasts for the duration of the warranty period specified in the passport. Complex technical products require special care and service. Maintenance of such products is carried out in the manner established by the instruction for operation. Maintenance must be carried out by specialists of authorized service centers at least once every 12 months (scheduled maintenance). Consumables are those materials that are subject to normal operational wear and change as necessary depending on the intensity of use of the product in which they are located (spark plugs, glow plugs, chains, tires, filters, sprockets, all cutting equipment, drive belts and parts, fasteners, tensions, transmission and chassis elements, hoses, cables, pulleys and cultivator cutters). Warranties do not apply to consumables. The warranty does not cover cases where defects have been caused by misuse, lack of proper maintenance, or when damage has occurred during transportation, handling, storage. Insufficient Maintenance: The service life of a product is affected by the conditions in which it is used, as well as the care and maintenance it receives according to the instructions for use. Product maintenance (adjustment, cleaning, replacement Supplies, periodic maintenance, etc.), provided for in the instruction manual, is not a warranty obligation of the manufacturer (seller) and is paid by the consumer at the rates of an authorized service center.
The warranty period is not set for:
1. Products and product parts that have been altered or modified to affect safety, performance or durability.
2. Repair work, malfunctions and defects resulting from:
- use of non-original spare parts and materials.
- violation of the instructions and recommendations specified in the instruction manual, including as a result of operation without proper maintenance.
- seizing or breakage of parts due to operation with insufficient lubricants, as well as the use of an inappropriate brand of oil.
- leakage of carburetors, jammed valves, clogged fuel lines or other malfunctions caused by the use of old (more than 30 days of storage) or contaminated fuel (gasoline, diesel fuel, etc.).
- unskilled repair or adjustment of attached parts or assemblies, clutches, transmissions, etc.
- damage or wear of parts caused by the ingress of abrasive (dirt), due to improper assembly, irregular maintenance and violation of operating conditions.
- Part damage due to over-revving, overheating, blockage by grass, dirt, debris, excessive vibration caused by poor anchorage or inadequate balance of cutting equipment.
- components and components of the tool, accessories.
- all plastic/plastic parts, attachments, etc.
- parts subject to natural wear and tear (spark plugs, glow plugs, chains, tires, filters, sprockets, all cutting equipment, drive belts and parts, fasteners, tensions, transmission and chassis elements, hoses, cables, pulleys and cultivator cutters).
- external mechanical, thermal, emergency, acid impacts on the tool, as well as abnormal loads.
- product maintenance (adjustment, cleaning, replacement of consumables, periodic maintenance, etc.) provided for in the instruction manual
The warranty excludes the effects of force majeure circumstances beyond the control of the manufacturer. In the event of untimely notification of the identified malfunctions, the seller, importer or authorized organization has the right to refuse, in whole or in part, to satisfy the claims made (Article 483 of the Civil Code of the Russian Federation). Factory marriage is determined by the expert commission of an authorized service center.
Loading...