Rotary and segment mowers for walk-behind tractors: comparison and detailed analysis, prices and specifications. Rotary and segment mower for a walk-behind tractor, an overview of the most purchased models and prices Rotary mowing principle

The scythe can be rearranged on its side, which makes the work even more convenient and efficient (this can also be seen on the video)

Main characteristics:

1. weight 45 kg;
2. develops a speed of 2.5 km / h;
3. has a working width of 600 mm;
4. goes well with MTZ.

Reviews

After joining the walk-behind tractor, the first gear stopped turning on. For a long time I could not understand what was the matter. When turning the steering column, the shift rod was not adjusted, although the manufacturer says that everything is set up from the factory. Spent a lot of time clarifying.

Rotary mower KRM-2

This model is used for mowing grass in parks, lawns, stadiums and other large green areas. The high performance of rotary equipment allows you to process large areas. The work is carried out smoothly and accurately.

Compared to the previous model, KRM-2 has large dimensions. The grip width has increased by 15 cm, and the weight has become 30 kg more. Due to this, her performance has improved by 450 m2 / h. On the MTZ motoblock, the tool is installed in front of the PTO. Amateur video offers to see quality work equipment. Just like on the previous model, for convenience, the braid is rearranged to one side.

Main characteristics:

1. weight 75 kg;
2. develops a speed of 2.5 km / h;
3. capture width 740 mm;
4. works great with MTZ

In the summer, the grass on the site can tighten and turn into a neglected field, even the most beautiful lawn. To prevent this from happening, the grass must be constantly trimmed or mowed. This is a difficult and long task, when only the old proven “grandfather's” braid is at hand. Using mowers for a walk-behind tractor, you can turn this unloved activity into a simple and exciting hobby. Mowers for walk-behind tractors will facilitate your work and help turn the design of your site into beautiful place recreation. And also help without special efforts cut grass for hay for cattle.

What models of mowers are

Among the large range of attachments for walk-behind tractors, mowers are the most popular both in large farms and in small household plots. Of course, you can not only buy a mower for a walk-behind tractor, but also make it yourself. But do not rush to make such a unit yourself. First compare the price and evaluate the lineup already finished products. I assure you that the low prices for these devices will pleasantly surprise and delight you. And you can pick up a finished model on any website of an online store that offers this technique in a large assortment and at different price categories.

When choosing, you need to evaluate the landscape of your site. The vegetation in each area is different in its composition of herbs, density and height. It is for this reason that two types of techniques have been developed by technicians:

1. Rotary (disk) mower for walk-behind tractor.
2. Segment (finger) mower for walk-behind tractor.

Each type of these units has both disadvantages and advantages.

The rotary mower of the Zarya company, developed and manufactured at the domestic plant Kaluga Engine, has a low price and high reliability. There is an analogue of this model of the Chinese manufacturer RM-1. If your site has low vegetation and low shrubs, grass, crops, then these models will delight you with their productivity. Rotary models are suitable for flat terrain or with slight slopes of 15-20 degrees. The side slope of such mowers does not exceed 8 degrees. The disadvantage of rotary mowers is a high injury hazard. Grass after mowing with such mowers fits into rows, and this makes it possible not to rob it in the future.

The design of disk technology is simpler, which reduces its breakdown. Rotary models are aggregated with motoblocks: Oka, Neva, Ugra, Cascade, MB-2M, Agros and the like. For the Salyut walk-behind tractor, separate modified mowers are produced.

When working with a rotary mower, you need to watch carefully so that the knives do not touch the stones. This will cause them to break or may warp or even damage the entire appliance. Not to mention that the stone, shattered into fragments, can harm you.

Important! When working with rotary models, the mandatory use of tools personal protection(goggles and gloves).

The new mower designed for the Neva mower, the Zarya-1 mower, has been modified and has its own advantages over other models. The mower for the Neva walk-behind tractor and the like has a height adjuster from 3 to 10 cm, which will make it possible to use it both to tidy up the lawn and use it as a lawn mower. This model does not have a transmission belt, which reduces the complexity of maintenance and repair. Due to the latest equipment of the mower for the Neva walk-behind tractor, high quality mowing and the formation of smooth shafts. The mower has been modified with "skis" to make it easier to mow flat surface. And the drums for pushing grass make it possible to mow the thickest and coarsest vegetation up to 1m high.

Segment mowers

Segment (finger) mowers are widely used. The most popular domestic models of such equipment are KM-0.5 produced by Mobil and Swift KNS-0.8, produced by Moscow Avtomash. The segmented mower for a walk-behind tractor is aggregated with equipment: Neva, Salyut, Mb-2M, cascade and similar models.

The knives of the segmental model move back and forth due to the action of the motor shaft. Due to the specifics of their design, rotary units are more difficult to maintain. But they have a number of their advantages.

The lateral location of such a device eliminates the pressing of already cut grass, as with rotary mowers. And the cutting elements “fingers” move during operation and repeat the landscape of the soil. This makes it possible to mow the grass almost at the very root. And the deviation of the knife mechanism mounted in the design by 20 degrees makes it possible to work on the most uneven types of soil. The mechanism itself for turning the unit on or off has no connection with the walk-behind tractor drive. This will make it possible to freely turn off the model in the most emergency situations. Knives in segment technology work in a balanced way, which makes it possible to reduce vibrations in the knife blade to a minimum.

The most popular models, the average price in Russia

We present to your attention the most famous models of mowers for walk-behind tractors.

This is a rotary model aggregated with motoblocks of the MB type: Neva, Kadvi, Oka, Cascade, Tselina and other similar ones. For walk-behind tractors: Agro, Belarus, MB-90 and the like, an additional bracket or gearbox must be used during installation.

The model is designed for grass with a rough or hard structure. Suitable for mowing small shrubs and grain crops. After mowing, the grass is laid in rows, which excludes its robbery. The width of the mowed area is from 70 to 80 cm. The labor productivity of this crumb is 0.2 ha / hour. This model weighs 33 kg. Available distinguishing feature: can work even on soil with stones and anthills.

You can buy it from the manufacturer or in stores of similar equipment. average price in Russia from 12 to 14 thousand rubles.

This is a modified model of the Zarya mower. Well cleans shrubs and grass of hard and tough crops. It is aggregated with motoblocks: Neva, Cascade, Oka, virgin soil and the like. The mass of the structure was reduced to 28 kg. This lightweight model makes it possible to mow grass in the most inaccessible places.

The labor productivity of this technique is 0.2 g/hour. Grass cutting width 80 cm.

You can buy such equipment from the manufacturer or in specialized stores. average cost in Russia from 14 to 16 thousand rubles.

KNS-0.8 Strizh

This is a model of finger technology for a walk-behind tractor. Suitable for motoblocks: Neva, Tu1, Salyut, Cascade. The labor productivity of this model is 0.25 g/h. The grip width of the knives is 80 cm. It weighs 35 kg. The maximum height of cut grass is 2 cm.

It is best to buy from the manufacturer or in attachment stores for walk-behind tractors. This unit costs on average in Russia from 15 to 20 thousand rubles.

KM-0.5

This is a compact model of a finger mower aggregated with walk-behind tractors: Hitachi S169, MKM, Salyut, Neva, Favorit. Due to its small dimensions (77x62x44.5 cm), it is popular with summer residents. The grass cutting height of this mower is 0.5 cm.
The width of the captured mowing area is 50 cm. This technique weighs 35 kg.

You can buy in Russia in specialized equipment stores. Since the manufacturer is in China, it is not advisable to purchase from a supplier. The mower costs from 11-14 thousand rubles.

Mower prices may vary depending on the season. AT winter time manufacturers present discounts, and it will be profitable to buy a mower for a walk-behind tractor. Of course, you can buy it in the season, but then it is unlikely that you will be able to save money.

Before you buy a mower for a walk-behind tractor, ask the seller to clearly show you each model, talk about its advantages. Ask for a quality certificate for this product. Since attachments for a walk-behind tractor are a sought-after product, you can easily encounter fakes. To prevent this from happening, use the services of trusted and reputable companies with a good reputation in the market for these products.

There are two types of mowers that can be installed on a walk-behind tractor - rotary and segmented. They differ only in the principle of operation. Both of them have their advantages, it is impossible to say unequivocally which is better. It all depends on the goals and characteristics of your site.

Rotary

It consists of a frame on which discs with cutting elements are mounted, the number of discs is different, usually there are two or three. On the side of the frame there are skids, through which the height of the grass cut is adjusted. The operation of the rotary mower is provided by a walk-behind tractor with the help of a gear while driving.

The number of knives determines the performance, the more of them, the higher the speed, but when choosing, you need to start from the characteristics of your cultivator, namely its power.

According to the methods of aggregation with a walk-behind tractor, mowers are divided into groups:

• trailed, or frontal, it is located in front of the walk-behind tractor;
• hinged, or rear, it is attached at the back;
• semi-trailer, it is installed on the side.

The main advantage of a rotary mower for a walk-behind tractor is its ease of operation, almost anyone can operate it, while ensuring complete safety.

Such mowers are made mainly in Russia and China, they are almost identical, although the reliability of domestic products is higher, they need less care and service.

segmental

Such a mower works on slightly different principles. On the frame, which is its basis and mounted on wheels, cutting knives are located. The blades reciprocate to remove grass and plants between their edges. Height adjustment is made using a slide.

The performance of such mowers is slightly higher, the degree of uniformity of mowing is almost the same, however, more care is required during operation so as not to touch the obstacle. The mowed grass is laid in rows that are easy to assemble, this feature is incorporated in the yard of models produced for specific types of basic walk-behind tractors.

The work of mowers for walk-behind tractors

A detailed description of the operation of each mower is easier to see on concrete examples, as short videos.

Rotary mower "Zarya"

Mower for motor cultivator "Neva"

Rotary mower for motoblock "Ugra", NMB-1

Segment mower for cultivators Oka, Neva, Cascade

All mowers are equipped detailed instructions, as a rule, users do not have problems during assembly, installation and operation. These technical devices quite simple, so they are in constant demand. One of the arguments is low price accessible to people of all income levels.

Overview of the most popular mowers

Let's start with rotary models as the most common.

Rotary frontal mower SCOUT RM-1

It is designed to work with any vegetation, the trunk diameter of which does not exceed 1 cm. Connection and drive from the belt shaft of the power take-off. It is installed on GardenScout walk-behind tractors, but aggregation with other models is also possible, the mount is unified. Installed in front of the walk-behind tractor.

The working tool is two disks that rotate towards each other. 4 knives are fixed on each, which rotate freely, under the action of centrifugal force, the knives extend beyond the perimeter of the disks, cutting off the vegetation. Height adjustment with a special slide provides high precision mowing.

Characteristics:

• Production: China;
• Bevel width: 850 mm;
• Number of working drums 2 pcs.;
• The number of knives in each circle is 4 pcs.;
• Maximum cutting height up to 70 mm;
• Weight: 27 kg.

Price — 12 470 rubles

Rotary rear mower SCOUT RM-2

Its parameters and purpose are in many respects similar to the previous model, it mows grass and plants, including shrubs with a trunk diameter of up to 1 cm.

Mounted on motor cultivators at the rear, operation is provided by the rear keyed shaft from the power take-off. Available for a number of motoblock models, such as Garden Scout GS105-135, Crosser CR-M6 - Crosser CR-M9, Patriot Garden, Green Field MB-105-135, Agrostar and a number of others. The mount is unified and allows you to install it on many walk-behind tractors without any problems.

This mower is very reliable and unpretentious, the only thing it needs is periodic maintenance after a few hours of operation. It consists in lubricating the joints and gears.

Height adjustment is made by transferring the center of gravity to the mower. The working tool is two disks that rotate towards each other. 4 knives are fixed on each, which rotate freely, under the action of centrifugal force, the knives extend beyond the perimeter of the disks, cutting grass and small shrubs.

Characteristics

• Production: China;
• Bevel width: 850 mm;
• Number of knives in each circle: 4 pieces;
• Maximum cutting height: up to 70 mm;
• Rated PTO speed: 540 rpm;
• Working speed: 2-4 km/h;
• Weight: 28 kg;

Price: 12 470 rubles

Rotary mower "Zarya"

Refers to attachments, designed for mowing grass and small shrubs with a diameter of up to 1.2 cm. It can be used not only on flat areas, but also on slopes, roadsides, and easily bypasses obstacles. Farmers in small farms use it for mowing grain and fodder crops, followed by laying in rows. Light weight, easy installation and high maneuverability with sufficient power make this mower popular. Produced in Kaluga.

The Zarya mower has two modifications, Zarya and Zarya-1, they are similar in many respects. Both models are connected to the walk-behind tractor gearbox through a spline connection, or through a belt drive to the pulley.

Motor cultivators that work with these mowers

• Ugra: NMB-1, MB-1D;
• Oka: MB-1D1, Oka MB-1D1(2)M;
• Kadvi MB-90M;
• Neva MB-1 and MB-2;
• Cascade, Luch, Agro and others.

Specifications:

Price from 14,000 to 17,000 rubles, depending on the seller

Mower KM-0,5 Terminator

Produced in Russia, designed for a wide range of walk-behind tractors, such as SunGarden, Neva, Tselina, Luch, Oka, Plowman, Pubert, Caiman, and many other types of MB. Mows grass, can grind it. Precise adjustment due to the slide makes it possible to set the height from 5 mm to 10 cm or more.

In addition, it is allowed to work not only on lawns, but also on uncleaned areas, small branches and pebbles are not obstacles for this mower. After the passage, a flat surface remains, the quality meets modern requirements. The mulching function allows you not to collect mowed grass.

Characteristics:

• Production: Russia;
• Bevel width: 500 mm;
• Number of working drums: 2 pieces;
• Number of knives in each circle: 2 pcs.;
• Maximum cutting height: up to 100 mm;
• Rated PTO speed: 1800-2400 rpm;
• Working speed: 2-4 km/h;
• Weight: 35 kg.

Price 14000 - 16000 rubles, depending on the seller

Mower KR-0.5 Neva

Designed to work in any area, including heavily overgrown, can cut stems up to 1.3 cm thick. It is used for the primary processing of the territory of any configuration, including with slopes, in farms and subsidiary farms, except for mowing, laying grass in windrows .

It is unpretentious in work, requires minimal maintenance, which consists in periodic lubrication after 10-12 hours of operation. High productivity, up to 0.1 - 0.16 hectares per hour, makes it an indispensable assistant. Works with motoblocks of the MB type of various modifications.

Characteristics:

• Production - Russia;
• Bevel width 1000 mm;
• Number of knives in a circle: 4 pcs.;
• Maximum cutting height: up to 2000 mm;
• Working speed: 2-4 km/h;
• Weight: 30 kg.

Price from 13,000 to 16,000 rubles, depending on the seller

Mower segment KH 1.1

It is applied on any types of sites, including overgrown and hard-to-reach. It also showed itself perfectly in wet areas, therefore it is acquired by farms for the preparation of feed for livestock.

High productivity, up to 0.2 hectares per hour, makes it very popular. Ease of connection and operation, minimum maintenance and low price, these are the main advantages. It can work with any motor cultivators of MB-1 and MB-2 types.

Characteristics:

• Production: Russia;
• Bevel width: 1100 mm;
• Number of working drums: 1 piece;
• Number of knives in a circle: 4 pcs.;
• Maximum cutting height: from 40 to 1500 mm;
• Maximum PTO speed: 2500 rpm;
• Speed ​​at work 2-4 km/h;
• Weight 45 kg.

Price from 10,500 rubles, depending on the seller

How to DIY

Trading networks offer big choice most different models, both rotary and segment mowers for walk-behind tractors, while prices start at 10 thousand rubles, which is affordable for most people.

However, someone may have specific requirements, or a suitable unit was lying around as a basis, so you can try to make a mower yourself. Drawings are not difficult to find on the Internet, but the basis for a rotary mower will be a frame made of a corner, or metal profile. Or take the rotor from the tractor, reducing it based on the power of your walk-behind tractor.

Working elements - knives that are mounted on disks cut from sheet metal. The fastening takes place as follows: an axial shaft (pipe) is welded in the center of the circles, a bearing is installed on it, the other bearing is mounted on a pulley.

Working units with knives are put on the axis, ease of rotation due to bearings, grass capture varies up to a meter, approximately. The finished structure is mounted on a welded chassis with wheels, covered with a casing from above.

This is in a nutshell, more details can be seen on the video, for example, this

If you need a wider grip, then two circles, like here

A segment mower is a little more difficult to make and will require more skill and time. For its basis, a pipe of a small section will serve, in which sockets are made for mounting bolts. A strip of metal with teeth and knives is installed on them, the knives are equipped with holders for the drive, and clamps and slides for movement are attached to the pipe. Work is provided by the drive from the motor-block.

What kind of mower do you need?

Before looking for a mower in stores, or trying to do it yourself, you need to clearly understand: for what purposes it will be intended. Therefore, it is with the model of the walk-behind tractor that we will begin. Each mower is produced for specific models, most fasteners are unified. The description clearly indicates the list of names, and the power of cultivators.

Next come the tasks. High-performance mowers do not always provide surface quality, for personal plot with a lawn, it makes no sense to buy something very powerful, it is better to stay on a model with a mulching function. And, on the contrary, in a subsidiary farm where there is cattle, it makes no sense to think about a flat surface after processing, it is better if the mowed grass is laid in rows for harvesting. There is no point in arguing about the merits of rotary and segment mowers, although many prefer the first type. It's easier and safer.

The issue of price is always relevant, on average it is about 15 thousand rubles, plus or minus. The money is not very big, but it is not superfluous, so you need to think about further repairs and maintenance after some time. Here, models of domestic production are out of competition, for obvious reasons.

Disadvantages of mowers for walk-behind tractors

In conclusion, a few words about the shortcomings that exist in any technique. The rotary mower works by rotating at high speed, so you need to be careful not to get a pebble that can fly off. Segment mowers also require attention, especially when servicing and adjusting before operation. In addition, they weigh a little more than a number of rotary ones, and are more expensive.

Sharpening knives is a common thing, in any technique. Therefore, you should pay attention to the quality of the cutting elements, or find out the reviews of those who have already purchased the model you have chosen. Not all mowers can work on rough terrain, so here you need to carefully read the instructions. As for productivity, one should not have illusions here, it will not be possible to process hectares with the help of such units.

Motor-block mower Mobile K KM-0,5 Terminator - mechanical means, which, complete with a walk-behind tractor, is used for mowing and chopping short grass.

Mower KM-0.5 Terminator is suitable for Salyut and Agat motoblocks.

Peculiarities:

Rotary mowing principle.

The bottom of the mower has 2 knives 25 cm long. This type of mowing is the most efficient.

Knives are made of high strength steel with the use of high frequency currents, which ensures durability, and also frees the operator from the need to sharpen knives.

Adjustable cutting height.

Due to special skids, the cutting height is adjustable from 5 mm to 10 cm.

Mulching grass.

Due to the very high rotation speed of the blades, all grass is mulched.

The mower is not afraid of falling stones, branches, earth, etc.

The parts are made of high-strength steel using laser cutting.

All parts of the mower are produced on an automated machining center using a laser and virtually without human intervention.

Powder coating.

All elements of the mower are painted in a powder chamber, using the latest technology.

As a result, the coating is durable and has an attractive appearance.

Design features of the mower for the KM-0.5 motoblock:

In the new modification of the mower, the control tensioner It is carried out on the steering wheel of the walk-behind tractor and carried out with the help of a cable and a clutch handle.

The knives are made of high-quality structural steel and hardened with high-frequency currents, which gives them additional strength and allows you to mow not only grass, but also weeds, shrubs and even young trees.

Characteristics of the mower Mobil K KM-0.5 Terminator