DIY bathroom ceiling in 15 minutes
What is plastic lining?
Plastic panels intended for toilets are lining, which are lightweight and made of PVC materials. It can be used to decorate both walls and ceilings.
The outer surface of the lining is smooth, and can be matte, glossy and even mirrored. A large assortment of materials and a variety of colors allows you to apply any design to decorate your bathroom. In this case, the plastic surface can be:
- white, matte;
- white, glossy;
- with imitation wood, marble and other expensive finishing materials;
- with a pattern that is applied to the surface using a special film.
Inside, these toilet modules have a porous structure. Their thickness ranges from 8 to 12 mm, length – from 2.5 to 6 m, and width – from 0.1 to 0.3 m. This variety allows you to apply any design when decorating a toilet.
Advantages and disadvantages of this material
Toilet finishing plastic panels allows you to get a large number of advantages:
The main disadvantage of this material is its low combustion resistance. Most often, plastic is not flammable. But when exposed to high temperature or fire, it begins to smolder and melt. This releases toxic gases that are very dangerous.
Also, finishing the toilet with plastic panels will steal at least 3-4 cm on each side. If there are large irregularities, the width of the room is reduced even more. That's why this material not suitable for a bathroom with a small area. What design solution can be used for the bathroom?
The design of the room when using plastic modules can be varied. This material can be used to cover all surfaces from the ceiling to the walls, as well as a small part of them. For example, install the panels on the wall from the floor to half the height of the wall. On the upper part you can apply cladding using putty. This way, you can easily clean the room. Bottom part, which gets most dirty, can be easily cleaned using detergents and disinfectants.
You can also use modules that, after installation, form a pattern. This way it is easy to create cozy atmosphere using any room design. Panels that imitate expensive cladding made of wood, granite or stone look good. In this case, the design of the bathroom will be very successful.
Necessary materials
Repairing a toilet with plastic panels with your own hands is very simple. The design of the room needs to be thought out in advance, since the choice of specific materials depends on this.
In this case you need to purchase:
- required number of PVC panels;
- edging elements;
- accessories for surface decoration;
- slats for creating a frame - wooden, aluminum, plastic;
- dowels;
- self-tapping screws - you need to choose ones with wide heads at the rate of 2 pieces per 1 linear meter profile.
It is also necessary to prepare tools that will help carry out installation as quickly and correctly as possible. To do this, take a building level, tape measure, jigsaw or hacksaw, screwdriver, drill.
Surface preparation
Before installing PVC modules, it is necessary to remove old finishing materials from the walls and ceiling. This will help increase usable area indoors, which decreases significantly subsequently.
Also be sure to repair the plumbing, sewer system and electrical wiring. Replace old pipes, cables, check quality connecting elements. This will help extend the life of the finish. In case it happens emergency situation, it will be necessary to completely dismantle some of the panels, which most often become unsuitable for further use.
To prevent the formation of fungus and mold on the surface of the walls, be sure to treat them with a primer. The design of the room must be thought out in advance, since additional strips need to be fixed in the place where the washbasin and cabinets are installed.
Frame installation
Making a frame for this design is very simple if you follow the following recommendations:
- Using wooden slats treat them with an antiseptic solution. This is best done the day before installing the frame. Treat it outside with a liquid that prevents the formation of fungus and wait until it dries.
- Along the perimeter of the room, at a distance of 2-3 cm from the ceiling, you need to attach slats or a UD profile. In the latter case, you need to use dowel nails. Fasten the profile every 0.6-0.7 m.
- Fix the following slats in a horizontal position towards the floor. Install them every 0.5 m. Attach them to the wall in the same way using dowels.
- Install a U-shaped profile on top of the sheathing in the corners of the room.
Toilet lining
Do reliable coverage made of plastic panels is very simple. Before installation, cut each element so that its length is 1-1.5 cm shorter than the height of the room. This shortage of material is compensated for by installing decorative strips.
The cladding process consists of next stages:
- Install the starting panel in the desired place, while the narrow shelf should be inserted into the profile, which is located in the corner of the room.
- Using self-tapping screws, attach the panel to the frame at the location of the wide strip on the surface of the lining.
- Thus, install all plastic modules.
- Near doorways and additionally install finishing strips in the corners of the room.
Only after covering the walls can you begin installing the panels on the ceiling. Installation of the frame in this case is carried out in the same way. In this case, along the perimeter of the ceiling you need to attach a special strip for mounting the baseboard.
The panels are connected to each other using a special lock and screws to the frame. In this way you can do the installation yourself plastic cladding in the toilet.
Video: Design and finishing of a toilet with plastic
When starting an apartment renovation, the main emphasis is on the main rooms in the house, such as the living room or bedroom. Toilet repair is often left for later, because there are not many requirements for it. The environment here is not as aggressive as, for example, in the bathroom or kitchen. But there is one significant difficulty, namely the small space.
Most wall finishing materials significantly reduce space, and if in the case of, for example, a living room this is acceptable, then in a cramped toilet every centimeter counts. That is why finishing bathrooms and toilets with PVC panels is the most common option.
The video shows how simple finishing PVC panels can transform a toilet room.
Advantages
- PVC panels can be mounted on minimum distance from the wall. In total, after finishing the walls, the room will lose only 3-5 cm.
- Plastic is not afraid of wet cleaning and detergents.
- Plastic panels are much cheaper than most finishing materials.
- Huge variety of colors and patterns.
- Finishing a toilet with your own hands, even without special skills, will only take a few hours.
- To work with panels, you do not need to level the walls. They will hide all the irregularities and mistakes of the builders.
Unfortunately, like any other material, PVC panels have a number of disadvantages, which also need to be taken into account when choosing a finish for a toilet.
Flaws
- Unlike wallpaper and painting, PVC panels will still take a few centimeters away from the room.
- Although vinyl has a low flammability rating, it produces acrid, toxic fumes when melted.
- PVC is of low quality and easily damaged. And they will need to be replaced.
As you can see, there are still fewer shortcomings. AND positive traits clearly winning. But in order to new renovation did not bring disappointments, you should know a few rules that must be followed when choosing PVC panels.
Selection Guide
At first glance, PVC panels differ only in their design, but this is a misconception; the quality of the plastic can vary significantly depending on the manufacturer.
It is best to ask friends who have encountered this issue, since it is quite difficult to visually determine the quality. But there are some tips:
- The PVC panel must be soft. High-quality plastic can bend to an angle of more than 90 degrees. You can bend the panel slightly until you feel tension; the larger the angle, the better.
- The fastening groove should bend freely without kinks, and return to its original position when you release it.
- The panels should not emit any noticeable odors. A noticeable smell of plastic is a sign of poor quality production.
The next nuance that needs to be taken into account is the width of the panel. It can be from 12 to 35 cm; the wider the segment, the more carefully the sheathing will need to be leveled. The best option For walls, a width of less than 25 cm is considered.
Advice ! Panels wider than 25 cm can be used on the ceiling. There, a slight distortion will not be so noticeable.
Once these two factors are taken into account, you can move on to choosing colors and patterns. It all depends on personal preferences and style. general interior apartments.
Preparation for installation of panels
Finishing a toilet with PVC panels will not take much time; a more complex and responsible process is making the sheathing on which the panels will be attached.
If the walls are perfectly smooth, or they have been plastered, then the panels can simply be glued to the wall without lathing. This method will save space, but the surface will first have to be treated with a primer.
Any DIY repair must begin with preparing the tool; this will avoid unnecessary fuss and significantly save time. The list of everything you need is not so long, and there is nothing specific in it:
- Roulette.
- Building level.
- Pencil.
- Hacksaws for wood and plastic (suitable for metal, with fine teeth).
- Hammer or drill with impact mode.
- Hammer.
- Construction stapler.
For making sheathing it is best to use wooden beam 1.5-2 cm thick, this is quite enough for PVC panels and it will not steal much space. Before you begin to fasten the timber, it must be treated with impregnations that will protect it from the formation of mold and mildew.
First of all, using a hammer drill and dowels, the upper and bottom strap. The lower one should be located parallel to the floor and at a minimum distance from the floor covering. The top one is under the ceiling, but taking into account the future ceiling decoration.
The remaining bars are also attached horizontally at a distance of approximately 30 cm from each other.
Advice ! The smaller the distance between the sheathing strips, the more firmly the panels will hold.
When all the sheathing bars are ready, you need to take care of the places where various accessories will be attached:
- Mirror.
- Hangers.
- Paper holders.
In these places you need to install small bars so that later when drilling holes in the plastic you do not damage it.
When the wood work is completed, install decorative corner in the left corner of the room, from where the installation of panels will begin. To install the corner it is best to use construction stapler, but if you don’t have one, furniture nails will do. They are similar in size to shoe boots, but have a wider clamping cap.
The corner is attached in 5-6 places at an equal distance, this is quite enough. If during the installation process a slight curvature appears, then you should not pay attention to it; subsequently it will straighten out with the panel.
The most difficult stage of finishing a toilet with PVC panels is behind us.
Panel installation
Installation begins on the left side, inserting the panel with the comb into the corner. The first segment must be set to the building level, then it will not be needed.
Once the panel is exposed, a stapler or nail is driven into the tab of the groove. Fastenings are made into each bar along the entire height.
To clearly understand how the frame is manufactured and the panels are installed, you can watch the video. For clarity, the master demonstrates the process on a simple wall, and every nuance is clearly visible.
Important ! When reaching the places where the bars for attaching accessories are located, they need to be marked with a pencil so that you do not later have to look for this place through the installed panels.
In this way, fastening is carried out to the next corner. The edge panel is cut along its entire length and a corner is placed on it before installation. It will be fixed to the next wall, from where the next segments will come.
Finishing in communication areas
The most difficult places for finishing work are communications. In order to cover the pipes with PVC panels, you will have to make a wooden box onto which the panels will be attached. Sometimes such structures are deliberately made larger than required, then the decorative frame can also serve as an additional shelf.
Fastening panels to a frame is no different from finishing walls, the only difference is that the fastening is not made into a special groove, but into the body of the panel itself, as close to the edge as possible, subsequently this place will be covered with decorative fittings.
Advice ! for finishing boxes, it is better to use outer corners, which are not put on the panel, but are attached to it with glue.
An important point when finishing communications is to remember about valves and meters that may be located in the toilet room. Access to such places should not be limited, so you will have to either make small doors, which is not so easy, or leave these places open.
Ceiling finishing
After the work with the walls is completed, you can move on to the ceiling. The principle here is the same, with the only difference that there is no need to install corners; their role will subsequently be played by ceiling plinths.
Advice ! To make the room look symmetrical, you can calculate the distance so that the joint of the panels runs exactly in the middle. In this case, you will have to cut not one, but two outer panels.
When finishing the ceiling, it is important to remember about lighting fixtures. It is better to drill holes in the required places on the floor before the panel is secured. And during installation, the wires are led out into the holes.
All stages of work can be seen in the video
Conclusion
When the ceiling and walls are completely finished, all that remains is to do finishing touches, namely, fix the baseboards. In stores you can find special skirting boards for PVC panels; they have a groove that is fixed on top of the panels, but to work with them you will have to carefully calculate the height of each segment.
Therefore, conventional ones are more often used plastic skirting boards, which are simply placed on construction adhesive. Working with them is much easier and there is no need to carry out complex calculations and measurements of each panel.
Connect last lighting and at this point the toilet renovation can be considered complete.
As seen, modern finishing installing a toilet with PVC panels is a completely simple process that anyone can handle. To do this, you do not need to have construction skills or experience, you just need to buy everything you need and follow the instructions.
The toilet is no less frequently visited place than, for example, the kitchen. In this regard, many people try to make repairs as aesthetically pleasing and beautiful as possible using plastic panels. You can cover the walls with your own hands, without using the help of a specialist, where the end result will be no worse than if the work was carried out by a team of craftsmen.
Advantages of plastic panels and choice of material
The first step is to choose panels made of plastic, the appearance of which today can be assessed on the Internet, after first familiarizing yourself with photographs of the products. In addition, modern stores are full of variety. decorative PVC. When choosing products for finishing the toilet, Special attention pay attention to the composition. High quality material must contain carbon, hydrogen and chlorine, the latter of which must necessarily be 46 percent ethylene and 57 percent combined chlorine. In addition, lead must be used in the production process of plastic panels. This composition contributes to the fact that finishing material will emit much less harmful substances during a fire; in addition, it is worth noting that modern plastic in the solid state it hardly burns.
Toilet finishing PVC panels allows walls to withstand high humidity and also easily tolerate various loads. In addition, this material has excellent heat resistance and insulation. And the main advantage of a plastic toilet is, of course, the low cost of finishing work when compared with others. In addition, PVC allows you to hide all existing unevenness on the walls in the toilet.
An important advantage is that when decorating a toilet with plastic panels, you do not have to waste time, effort and money on leveling the surfaces. In addition, your head will not be occupied with thoughts regarding the sounds that may be coming from the room, because PVC has excellent sound insulation.
Another advantage of such panels is that they can be used to successfully hide electrical wiring in the toilet without fear of a fire due to water ingress. If you purchase plastic products for finishing, the thickness of which will be 10 millimeters, then they can be safely used for lining not only the toilet, but also the kitchen and bathroom, since they will be an excellent replacement for expensive tiled flooring . In addition, PVC is excellent not only for finishing the toilet, but also other places that are characterized by high humidity. As a rule, such places are sheathed with white plastic panels, but you can choose from laminated PVC, which can give the interior a beautiful look.
It is worth remembering that the main criterion in the process of choosing material for finishing a toilet is final view on the wall of the room. And it is best to make a purchase through specialized stores rather than on the market. In addition, in stores they will be located directly on the walls, which will make it possible to better represent finished look toilet, after finishing. In addition, in stores the likelihood of encountering a fake is much less, since they carefully monitor the quality of the products received.
When purchasing plastic panels for finishing a toilet, carefully inspect the paint. Layer coloring material should be uniform and not contain black spots on the surface. All plastic panels should not have waves with differences, they should have the same dimensions. Otherwise, during the process of repairing the toilet, difficulties may arise when installing the products. In this case, unevenness in length is acceptable, since the plastic panels will straighten when fastened.
Finishing
Before you start covering the toilet, you need to carefully prepare the walls. This is quite simple to do: dilute a small amount of fat-free product in water, then rinse the surface of the walls. Next, wipe the walls with a dry cloth, leaving until completely dry.
Measure the toilet, namely its length, width and height. In this case, existing projections, as well as window and door openings, should be taken into account. To hide passing communications, you should calculate the most optimal size.
Toilet wall decoration
Frame installation
Calculate the number of plastic panels that will be needed to completely finish the toilet. Today in stores, as a rule, you can see panels whose width is 0.375 and 0.25 meters. If the walls in your toilet are not particularly even, then you should buy a dry lath that will allow you to mount the frame. In addition, do not forget to purchase finishing and starting profiles, skirting boards, corners for skirting boards, as well as internal and external corners. In this case, it is best to buy everything with a small margin.
Process the rail protective composition, which will protect the wood from the formation of mold and mildew. As soon as the lath is dry, you can begin installing the frame. Divide the slats into specific parts that will fully correspond to the horizontal dimensions of the wall. Secure 4 slats on each side. The fasteners should be parallel to the floor surface and to each other, with a gap between them of approximately half a meter. During installation work in the toilet, you can use dowel nails.
Plastic trim
Decide for yourself which side is best to start finishing the frame. Adjust the size to the corner or starting profile, in this case it all depends on where you are going to start finishing the toilet. Fix the profile over the frame; fastening can be done using a stapler or small self-tapping screws. For more quality installation It is recommended to use a level, since installing the first plastic element installation of subsequent products will depend.
Adjust the plastic panel to the required dimensions, then insert it all the way into the starting profile. Using a stapler, attach the panel to the slats. The rest of the products should be finished in the same way.
Cut the plastic panels immediately before installation, having previously measured the height. It is likely that strong differences may occur during the finishing process of the toilet. It is best to make holes for the plumbing hatch and ventilation using a sharp knife.
Ceiling finishing
Toilet ceiling trim plastic products differs only in method frame fastening. In this case, the frame itself must be installed on direct hangers, choosing light bars with a small cross-section or ceiling profile. This approach will allow you to most correctly place the lamps in the ceiling space, as well as control the height ceiling surface. At the same time, it is best to make holes for lamps using a sharp knife.
It is best to leave small gaps along the edges of the toilet ceiling, which will make it easier to install the ceiling plinth in the future. If your toilet has smooth walls, then you can use frameless method wall decoration. In this case, plastic panels can be attached directly to the surface of the walls.
Choose what is best for finishing: mounting adhesive or dowel-nails. In the case of glue, you should coat the first plastic panel well, and then press it firmly against the wall.
Well, in this way, finishing the toilet with plastic panels is not so difficult, and therefore there is no need to delay the repair. Buy materials and get to work. Good luck.
Traditionally, the toilet is one of the smallest rooms in the apartment. At first glance, there is nothing complicated in its decoration, but this is not entirely true. Appearance bathroom affects general impression about the apartment. Equally important will be to ensure convenience and comfort in it. It would be rational to use the available square meters to the maximum, which should be thought out and calculated in advance.
The best options for wall decoration in the bathroom
Due to its specific nature, the toilet space requires the use of suitable finishing materials - moisture-resistant, easy to clean, durable. Let's consider the most popular of them, traditional and those that have come into use relatively recently.
Tile
This finishing method can be considered classic. Ceramic tiles have a number of advantages: moisture resistance, ease of cleaning, long service life, durability, reliability, aesthetics, hygiene, and the ability to choose various combinations in wall design. The disadvantages of such a coating include a rather labor-intensive installation process, higher costs for materials and the need for smooth walls.
If you need to first level the walls, then the order of laying the tiles is as follows:
- We level the walls using, then, and finally.
- Masking engineering Communication- better with help plasterboard sheets on the crate, on which we place tiles on top.
- We are engaged in the actual laying of the tiles, trying to do it evenly and in accordance with each other.
- We grout the seams using a special grout.
Finishing a toilet with mosaics is also quite labor-intensive, but it allows you to achieve very different effects - in combination with regular-sized tiles, or on their own. Mosaics can be used to create entire artistic canvases, which will give the toilet uniqueness and exclusivity. It is sold in rolls and comes in different shapes - square, round, triangular. Before working with mosaics, you also need to prepare the walls accordingly.
Now the so-called 3D tiles have come into fashion - a special combination of tiles and carbon film, on which a three-dimensional image effect is obtained. This decision contributes visual expansion space, although it does not apply to budget ones.
Tiling involves using its elements strictly for their intended purpose. You cannot use floor tiles for wall decoration - they are too heavy and may fall off at the most inopportune moment. It is also not recommended to lay wall tiles on the floor - they are thin and fragile for such a purpose, and also slippery, which can be fraught with falls and injuries at the slightest increase in humidity.
You can choose tiles with standard strength, since at home they are not subject to such heavy loads as in public places.
Paneling
Paneling is one of the budget options decoration of toilet walls.
Plastic panels are moisture resistant, easy to clean using conventional products, easy and quick to install, you can choose different colors and pattern combinations.
In addition, PVC panels can be sheathed uneven walls, and also hide the communications under them. But their resistance to mechanical damage not so high, and in most cases, preliminary lathing of the walls is required. But for small rooms this is contraindicated, as it steals part of the usable space.
If the walls in the toilet were previously leveled, then you can do without lathing and install the panels on a previously cleaned surface using mounting adhesive.
Alternatively, you can use panels made of MDF or wood, but they are suitable for more or less spacious premises, besides, they are more difficult to clean, since these materials tolerate moisture less well.
Wallpapering
One of inexpensive options finishing the walls of the toilet is to cover them with wallpaper. It is very advisable to choose washable wallpaper - they are resistant to moisture, temperature changes and household chemicals.
In general, you can choose from the following types of wallpaper:
- paper - it is better to choose models with a hydrophobic layer in order to be able to wet cleaning;
- vinyl – durable and safe, you can find many colors and patterns. In terms of their structure, smooth or foamed fabrics will be more practical, which will make them easier to wash;
- fiberglass - beautiful, resistant to moisture, fire and detergents. But this type of wallpaper will cost more than others.
Liquid wallpaper
Toilet finishing liquid wallpaper- This the new kind wall decoration, which is easy to use and resistant to moisture. Liquid wallpaper is sold in powder form, from which a solution is made that fills cracks and imperfections in the wall. Therefore, you can do without preliminary alignment. Apply the solution using a roller or spatula to any surface. The powder may contain fibers of cotton, wool, cellulose, and mica. Liquid wallpaper does not crack or peel even with temperature changes; in addition, it can be produced in different colors and with different textures.
Wall painting
Interior decoration of a restroom using paint is an affordable and quick finishing option for most of our compatriots. There is a wide selection of paint on the market; in addition, you can use all kinds of stencils and patterns. It is better to choose latex-based paint, as it is easy to care for and is resistant to moisture and dirt. But the coloring will only look good if it’s perfect. smooth walls. To level them, you must first plaster, then apply starting putty to smooth out significant defects. At the end it is applied finishing putty and the surface of the wall is cleaned, after which painting is carried out.
Designer wall decoration
People who are not limited in funds can decorate their bathroom using more expensive finishing materials. These are granite, marble, onyx, malachite, “face brick”, pebbles on a grid, tempered glass and the like. But it is better to use such materials in fragments, since not all are easy to clean due to their structure.
New fashion trend– plants on the walls, moss or greenery, look unusual, but are quite expensive and not so easy to care for. Will need special system watering system built into the bathroom.
A good option would be to combine several types of finishes on the wall. For example, the bottom, which is most exposed to contamination and, accordingly, needs frequent wet cleaning, can be finished with PVC panels, and the top with wallpaper or other material that suits your taste. Original combination will be made from mosaics and ceramic tiles.
Finishing the floor and ceiling in the toilet
Since the plumbing room is characterized by somewhat high humidity, it is better to finish the ceiling and floor from waterproof and durable materials.
To finish the ceiling you can use:
- Tensile structures are not a cheap option, but they are aesthetic, non-toxic, durable, hide unevenness, and are resistant to moisture and temperature changes;
- suspended structures made of plasterboard are a less expensive option that also hides unevenness and communications. This ceiling has excellent sound and heat insulation, is resistant to temperature changes, and is easy to care for;
- slatted canvas - attached to the installed fastening system. The material is durable, resistant to damage, but expensive;
- plastic panels - have many of the advantages described above, but a nice bonus is the availability of finishing at a price and ease of installation;
- plaster is the easiest way to decorate a ceiling, and it’s also not expensive. If desired, the top of the ceiling can be painted using moisture-resistant paint.
At the end finishing work you can grab the floor. Best choice will tile, specially designed for floor finishing - it is quite durable and non-slip, and also the most hygienic, convenient and easy to clean.
Not long ago, a new product appeared in the interior - self-leveling 3D floors, consisting of a polymer material with a 3D image and a protective transparent layer of PVC. Due to their high cost, they are popular in bathrooms, and create stunning effects, embodying any imagination of the artist and customer.
Self-leveling 3D floors
Color solutions in the interior of the toilet
When choosing color range For a sanitary room, first of all, you should remember the old truth: dark colors They narrow and reduce the space, while light ones expand and visually enlarge. Therefore, first of all, you need to consider the size of the room. Since in most apartments the toilets are small in size - usually 2-3 square meters– then you should give preference to light finishing materials with a small addition of darker or brighter colors. A toilet that is completely decorated using only one color looks uncomfortable.
A narrow and long toilet can be visually expanded and lowered by horizontal division into two parts. The bottom of the wall is decorated using a darker or bright color, and the top is lighter and more neutral. A horizontal stripe running along the wall visually brings the ceiling closer, and a vertical stripe moves it away. There may be several such stripes, and not necessarily continuous.
A second color can be added using an accent area, which is created not only using a finishing material of a different color, brighter, but also using a different material.
So that the toilet is in the same composition with general design apartments are the most rational most Organize the decoration using neutral tones and dilute it with bright accessories to match the overall design.
You can make the room less tall by using part of the wall decoration of the same color as the floor - for example, narrow strips of tiles on the wall, the same as on the floor.
Arrangement of furniture and plumbing fixtures in the bathroom
Traditionally, the toilet is placed on the opposite wall from the entrance, exactly in the middle. If the space of the room allows, you can additionally install a small sink in the toilet for washing hands. Fortunately, today there are plumbing fixtures of different shapes and sizes on the market. If there is an area on the sides of the toilet, but it is not enough to install anything else, then you can move the toilet to one of the walls. This rearrangement can free up valuable space for something else. Additionally can be installed in the toilet washing machine or a bidet – if desired and necessary.
The corner toilet will go well with corner sink, which is useful for small spaces.
Ideas for camouflage and additional convenience in the toilet
The modern decoration of the toilet takes on a complete look when the interior is finally organized. Having thought through the camouflage of communications that are in plain sight and furnishing the toilet whenever possible comfortable furniture, we will get comfortable and comfortable bathroom, in which it is pleasant to stay and satisfy everyday needs.
You can disguise pipes and hoses using a special box made of plastic or plasterboard, utility cabinets or roller blinds.
In case of leaks, quick access to the pipes must be provided. An inconspicuous hatch is suitable for this, although it can be highlighted as a separate interior accent on the wall surface. Above the box you can organize shelves or niches for storing all kinds of small items or decorative elements.
If space allows, you can put some useful furniture in the bathroom. Instead of a regular sink, you can install a sink with a cabinet that can accommodate many useful things. A rack or cabinet, a cabinet can protrude additional places for storage, especially if there is not enough space in the apartment. You just need to remember to choose furniture and accessories in accordance with the chosen interior style. A mirror on the wall will visually expand the room and act as a useful addition to the sanitary room.
Taking into account all the above, there are many convenient, functional and aesthetic options finishing toilet room. You can bring any interior to life, from classic to unusual, with the help of modern materials, ideas and imagination.
The bathroom is very important room in any apartment, which is why many people are concerned with the question of how to decorate the toilet. What is this room like? As a rule, we are talking about a small, separate room for sanitary purposes, however, some people love to retire here in order to be alone, just to read. That is why it is very important that the bathroom is distinguished not only by convenience, but also by coziness, comfort, and beauty.
Finishing stages
How to decorate a toilet in an apartment? The scheme is something like this:
- First they work with the walls;
- Then they make the ceiling;
- Afterwards the floor covering is installed.
A fairly common question is how to decorate a toilet other than tiles. In fact, the choice of finishing materials is large, but when working it is important to take into account that the humidity level in this room is quite elevated.
Whatever one may say, the main finishing material for bathrooms is still ceramic tiles. Tile is used for wall cladding, and it is also chosen to cover floors.
It is not difficult to explain such popularity - the tiles respond well to moisture, as well as open water, therefore this is a very big plus. If you want to use some other option, you should pay attention to plastic panels for finishing the toilet, but we will talk about this a little later.
Wall covering
Before we talk about how to decorate a toilet other than tiles, let's talk about trends in this area. Nowadays, bathrooms that look bright, beautiful, and tastefully decorated are considered good form. Tiling – this option can be called aesthetic and practical. However, if you pay attention to the cost, such a solution will not be cheap; the work will be quite labor-intensive. It is important to remember when choosing tiles for the toilet that the room is not too spacious, therefore, you should avoid dark colors to prevent a visual reduction in space. The ideal way: buying tiles in light colors - the sizes will increase visually, as if “opening up” to greet visitors.
What’s also good is that nowadays manufacturers make tiles of a wide variety of characteristics - the choice is rich both in terms of texture and shades, there are many decorative elements for tiles. To make the bathroom look more comfortable, it is recommended to select some combination options - so that it looks bright, but is not too flashy.
It is important to remember that the tiles in the toilet often come into contact with certain chemicals Therefore, the material must be moisture-resistant and kilo-resistant.
An excellent option, for example, is tile with high chemical resistance. A simpler solution, at the same time the most optimal and cheapest, is to decorate the toilet with plastic panels. To do this kind of work, you don’t need any serious skills. Let's talk about how to finish a toilet with panels, what work should be done for this.
Wall decoration with plastic panels
How to decorate a toilet with plastic panels? This is not difficult - first they make the sheathing: wooden blocks are attached to the walls of the bathroom; they should be 0.2 by 0.3 cm or so.
When the sheathing is completed, plastic panels are installed on it. For fastening, a construction stapler is usually chosen - in this case, the work is very convenient and fast.
Special transition corners made of plastic are installed in the corners. You can choose plastic panels both by design and color, but the main advantage of this material is its excellent resistance to moisture. Of course, there are other finishing options - you can, for example, choose MDF lining: in this case, the bathroom will be decorated like wood.
The fact is that repair is a rather acute, painful topic for anyone. modern man. The soul becomes especially anxious when repairs are carried out in the toilet or bathroom. If you choose traditional tiling, you will need a large amount of money - it is unlikely that the budget of an ordinary family can cope with such “damage”.
If finances are limited, it’s time to finish the toilet using PVC panels - this method is being chosen more and more often today when the question arises of how to finish the toilet other than tiles.
What are the positive aspects of PVC
Behind last years This finishing material has gained great popularity, but what is most interesting is that not every person knows about all its advantages.
- For example, the panels will not rot - even after several years the material will not change its properties.
- Also, the panels are very beautiful, especially in a modern design. It is unlikely that you can find something better for the same price.
- Rapidity installation work: PVC panels are not required to decorate a toilet large quantities time.
If the bathroom has a standard shape and you have everything at hand necessary materials and tools, the cladding can be completed in one day if desired (of course, this does not take into account the finishing touches). What can I say - efficiency today is a priority for many jobs, especially since you can forget about cement, tiles, and other tedious procedures.
What you need to work with PVC panels
First, let's select the panels themselves. Here you can do everything according to your own tastes - choice color solutions today is rich, so everyone will find something interesting for themselves. You should also remember that you must purchase the necessary Consumables, necessary tools– without all this, it’s unlikely that you’ll be able to cover the walls of the toilet with plastic panels. What should I buy for cladding?
- A quality utility knife: you need to make sure that it can cut the panels optimally and without any effort. Are you thinking of using a kitchen knife for this job? This is possible, but at your own peril and risk - plastic, as a rule, quickly dulls metal, and the cut lines will also turn out crooked.
- Self-tapping screws, screwdriver: during work you will have to attach the panels to the sheathing. Dowels may also be required.
- You need beams with a cross section of 3 by 10 cm, or you can choose aluminum profile, the main thing is that it has a similar configuration.
- If you plan to hang panels directly on the wall, you need to get liquid nails, a gun for their use, polyurethane foam.
- Repair work should not be started without a tape measure, building level, decorative skirting boards and profile corners.
Choosing a panel finishing method
If the decision has been made, it’s time to find out how to decorate the toilet with panels. First, you need to understand which method of fixing the panels to the walls to use. There are two possible ways:
- On a frame made of wood or metal profile;
- Using foam.
If the second option is chosen, it is worth buying cylinders with a “fresh” expiration date. In this case, the foam yield will be significantly greater. Which method should you choose personally? If the bathroom in the apartment is spacious enough, there are smooth brick or concrete walls, there is no point in working on the sheathing. Plastic panels are best attached to liquid nails.
Be sure to keep in mind that during the work you will have to be patient; PVC will not stick in a matter of seconds. Moreover, you will need to either hold the panels yourself or install spacers between the walls.
Gluing panels onto liquid nails is not a difficult job, so let’s talk about how to work with the sheathing correctly.
Preparing for paneling
Before getting to work, the toilet needs to be prepared - all finishing elements that may interfere are removed, sockets and lighting devices are removed. If the work can be complicated by hoses or pipes, in an ideal situation it is better to dismantle it all, otherwise it will be much more difficult to decorate the toilet with PVC panels.
There is another relevant remark - you can often come across messages on the Internet that timber is not the best best material for sheathing. They write that it can become deformed and swell - because of this, the wall will immediately begin to look not very attractive. If, in fact, the humidity level in a room regularly rises, it is worth considering the following statements: proportion common sense they have. But there is also a way out - just before covering the toilet with plastic panels, the timber is carefully treated: any antiseptic for wood will do for this. If the humidity level is normal, there is no reason to worry at all.
Start of work on finishing the bathroom with PVC panels
First, the sheathing is attached. Since the panels will almost always be positioned from top to bottom, it is necessary to fasten the beams perpendicular to the floor. To execute this work, dowels are usually used. Since something will also need to be done with the ceiling, the sheathing is also attached to it.
It is recommended to maintain a distance of up to 400-500 mm between individual beams. The correct fastening of the beams is constantly monitored - this is done using a building level.
Before covering the toilet with plastic panels, you need to secure it in the corners decorative profiles- the same ones where the corner panels will later be inserted.
You should start working from the corner. One edge of the PVC panel is inserted into the profile, after which the second side is attached to the screws.
The screw must be screwed into a lock that is flexible and large in size.
How to cut plastic panels correctly– many people ask this question. In fact, there is nothing complicated here: the panels are turned over with the wrong side out, placed on some solid base, then a cut is made using a stationery knife. A line is formed, along which the panel is broken, and the thin layer of plastic that remains is cut off with the same knife.
With the next panel everything will be easier: it needs to be inserted until a distinct click occurs. Then they are fastened again with self-tapping screws. You can finish the ceiling in a PVC toilet in exactly the same way (if this work is in the plans, a profile must be installed on its surface). Next, you can take on decorative overlays and baseboards, with the help of which you can easily hide defects and various technological gaps.
This is roughly how anyone can decorate a toilet with plastic panels. There are no special, insoluble difficulties in the work. The main thing during the execution process is to carefully fasten the panels to each other so that there are no gaps. Better to plant with glue ceiling skirting boards– they are needed only for decoration.
Finishing with MDF panels (lining)
We have discussed in detail how to decorate a toilet with panels, now a few words about MDF panels. These are very thin, light panels, the facing layer of which imitates wood. expensive breeds. Often this finishing option is chosen for large toilets, or for those cases when you want to get a room decorated in a classic style.
What's good about lining? The panels are moisture-resistant, perfectly resistant to various microorganisms and harmful fungi - thanks to all this, MDF panels can be called hygienic and safe for household use.
Yes, this option will cost more than tiles in terms of cost, but there are significant savings when compared with natural wood. In general, the walls in the bathroom can be whatever you want - the most important thing is that they are water-resistant and smooth.
Wallpapering bathroom walls
If we consider decorating toilet walls with wallpaper, we can say that this is the cheapest, quick way decorate the room. The main basic condition for such work is even, smooth walls. But there is one drawback - many wallpapers are very susceptible to a damp wall. If you choose wallpaper for finishing the toilet, then only moisture-resistant or vinyl.
How to finish a toilet ceiling
Cladding the bathroom ceiling is the second stage of renovation work in this room. Everyone knows that the toilet is the very place where you need to regularly perform wet cleaning. That is, perfect solution for the top - a moisture-resistant ceiling. There are several options for finishing this place:
- Moisture-resistant drywall;
- Plastic plates;
- Suspended structures made of aluminum.
Today they often choose stretch ceiling. This product is very attractive. What's most interesting is similar design can be installed Spotlights. This is a big plus for small rooms - the fact is that the light from the lamps is reflected on shiny surfaces, thanks to which the space can be expanded optically.
An alternative solution that will tell you how to decorate the toilet is arranging the ceiling with foam plastic decorative slabs. However, you can simply paint the surface some pretty color. Shelves in the bathroom made of PVC panels are a really good, practical solution.
Floor covering
The floor treatment begins at the final stage of repairs in the toilet. Of course, the most Best offer– tiling the floor in the bathroom. This method looks great and is very easy to clean if you use certain cleaning products. The tiles for the floor are selected taking into account certain requirements, for example, they must fit well with the coating that is on the walls. The design, which was carefully selected for laying tiles on the floor surface, will make the toilet more visually voluminous.
The floor in the toilet is often subject to temperature changes, and there is also increased humidity. In a toilet (compared to a bathroom), only waterproofing can be done - it is usually applied not only to the floor, but also to the surface of the walls - at least 20 cm.
The ideal solution is tiles in the toilet, both for the floor and for the walls. But there are also more economical, practical options, for example, linoleum. To install this material, no special skills are needed; these floors can be easily installed on your own. If you want your toilet to have a heated film floor, you should definitely implement it - the room will be very comfortable. At the end of laying the floor, baseboards are installed. What is also interesting is that in the toilet there are usually various communications: sewer, water pipes and so on. It is important to do the finishing so that all these elements are hidden from view. But there should always be access to them - if necessary, special doors are installed so that you can quickly get to one or another communication node. Boxes are often made of plastic or moisture-resistant plasterboard; it is also finished - usually the same material is chosen as for wall cladding. This is the only way to achieve the final goal - a practical, well-appointed, cozy bathroom in the apartment.
Video: finishing the toilet
We bring to your attention an excellent video on how to decorate a toilet with your own hands. After watching, everyone will understand that such work is not too complicated, so turning to specialists for help is not so important.
Loading...