Stretch ceiling in the bedroom without a chandelier. Lighting in the bedroom with stretch ceilings: photos and design options. Stretch ceiling in the bedroom with spotlights: location methods

How to plan the lighting in the bedroom so that you can create a romantic atmosphere, relax, read a book at night? In our article, you will learn in more detail about how to place spotlights on the ceiling in the bedroom. + Successful options in the photo examples.

Stretch ceilings are distinguished by the fact that after installation it is not so easy to hang another lamp or remove one that has served for some time. Therefore, it is advisable to think over the layout before the canvas is stretched.

Features of stretch ceilings and lighting fixtures for them

Regardless of which material is used, a stretch ceiling is considered a suspended structure. This means that at least 5 cm of usable space remains between the film and the floor slab, which can be used for laying communications and installing hidden elements.

Thanks to this, various lighting schemes and luminaire arrangements are created. But more on that later. And now let's figure it out what are the benefits of stretch fabric, and how to use them.

No need to ditch the ceiling for wiring. All wiring is carried out by surface mounting. The wires are laid in a corrugated pipe and are led to the fixing points of the fixtures. The wiring is done before the film is stretched. At this stage, you can make corrections. Those. you can pre-connect the lamps and see how comfortable you will be in such lighting.
Glossy surfaces form an almost mirror image. This is convenient in cases where the ceilings are low, you want space. The line between walls and ceiling is blurred. There seems to be a lot of headroom. Black, dark brown and chocolate canvases have an almost mirror image. Contrary to the dark shade, they can visually increase the volume of the room. If you remove the chandelier and leave only spots, the effect will be maximum.

However, there are also disadvantages:

It will be difficult to move the lamp after installation, since a hole is cut out under it in the film. You can, of course, glue the patch, but the view will not be the same.
The film does not tolerate overheating. Therefore, only low-temperature and low-power lamps are used for it. One lamp per 1.5 m2.
Halogen lamps burn out almost as fast as incandescent lamps.. The more lights, the higher the cost. Now lamp manufacturers have replaced halogen with LEDs, they are more durable and more reliable.

Do you need a chandelier?

In European interior styles, a chandelier is an indispensable element. In addition, according to the sanitary standards specified in the SNiP, 150 Lm / m2 is needed for the bedroom.

For a bedroom of 20 m2, you will need for the entire area:

150lm/m2*20m2=3000lm.

A more accurate calculation can be obtained using the formula.

N=(S*W)/P

N - spots (pcs.).
S is the floor area.
W is the power of the luminous flux (W/m).
P is the power of one lamp.

Incandescent lamps give more powerful light. But they cannot be installed in spots, because. they have a high temperature. In addition, the lower the lamp is located, the brighter the light under it.

In addition, the more small low-power lamps, the more often you have to change the lamps.

Therefore, a chandelier is not only an aesthetic issue, but also a financial one. Because it allows part of the lighting to be transferred to bright lamps that can be placed below the stretch ceiling. This means increasing their brightness and reducing film heating and using more powerful models. For example, three 25-watt fluorescent bulbs can completely cover the lighting needs of a bedroom.

At the same time, 15 spots of 5 W each will be required to meet the SNiP standard.

In addition, if the room is supposed to:

work with a PC, the standard doubles and is 300 Lm / m2;
for needlework that requires a lot of eye strain and drawing work, local lighting is increased to 500 lm / m2.

The chandelier allows you to provide bright illumination of the room, and the spots form a soft diffused light that promotes peace and relaxation.

LED lamp

LEDs consume little electricity, shine brightly and do not heat up. This allows you to save on utility bills and install more powerful fixtures on stretch ceilings.

A matrix of diodes can operate on voltages of 220 and 12 V. When buying, be sure to check this nuance. Because for 12-volt models, you need to install power supplies that can provide electricity to all available spots.

When choosing a lamp, focus not on power, but on the strength of the luminous flux (Lm). At the same time, keep in mind that the cold spectrum (over 4000) seems brighter. But he should not go into the blue. Warm (3000) will give a feeling of peace and comfort. However, reading and doing needlework with him is quite difficult. The eyes will get tired.

Note: After buying expensive lamps, be sure to keep the receipt, as the guarantee for them is from 1 year to 5 years and in case of burning, you can easily exchange them for free.

Spot layouts

The main lighting areas should be equipped with a sufficient number of fixtures.

with chandelier

The chandelier is usually located in the center of the ceiling. However, in some projects, it is permissible to have two chandeliers on long holders, which replace wall lamps and floor lamps. If the room is elongated or has a curved shape, then it makes sense to make two zones, the center of which will again be a chandelier.

In the classic version, spots are placed symmetrically around the central element.

The most common schemes:

Square. Spots are located along the perimeter of the ceiling at an equidistant distance from each other.
Oval. The lamps form an oval around the chandelier.
Two arcs. Two symmetrical lines are formed around the central element in the form of an arc.
Parallel. Two parallel lines. It is often used when it is necessary to emphasize the decorative insert above the bed, smoothly flowing to the ceiling.
corners. Corners are formed in two or four corners. Each of 3-5 spots.
snake or wave. Well combines two chandeliers in a large room and interestingly plays with one central lamp in an elongated bedroom.

Without chandelier

You can leave the option with spotlights without a chandelier. To do this, you need to calculate the right amount of light so that the room is fully lit.

Schemes for the location of fixtures on a stretch ceiling without a chandelier.

Matrix. The ceiling is drawn into cells, as in a school notebook. Spots are located at the intersection of the lines.
Spiral. The line is twisted into a spiral. In this case, a round, oval shape or the golden section formula can be used.
Two arcs in the corner. One of the corners is formed by two parallel rounded lines.
diamonds. Spots form rhombuses located along the central along the entire length of the ceiling.
starry sky. The matrix is located behind the film and is aligned with the image printed on the canvas. LEDs and fiber optics are used.

With all this, it is not forbidden to combine lamps with LED strips.

Reading time ≈ 11 minutes

In the bedroom, it is important to create an atmosphere of calm, relaxation, comfort and harmony, so the decoration of the room must be approached with all responsibility. In many ways, the ceiling is responsible for the aesthetics and comfort in the room, and one of the most modern ways to design it is a stretch film. Therefore, we bring to your attention a selection of photos and recommendations for the design of a stretch ceiling in the bedroom with spotlights, chandeliers and other variations.

An example of a two-level stretch ceiling with a chandelier and spot lighting around the perimeter.

Advantages and disadvantages of a stretch fabric

Stretch film - the most popular and popular option for finishing the ceiling. The material has earned such popularity due to numerous positive characteristics:

long service life. Manufacturers indicate a service life of 10-15 years, but in practice the coating can last much longer;
simplicity and speed of installation in a few hours without preliminary preparation of the premises;
design options for any wallet and taste (you can choose a design of any complexity and with the most;
material safety (resistance to ignition, combustion and chemical reactions);
practicality and ease of care;
preservation of all properties and appearance throughout the service life (resistance to moisture, decay);
the ability to hide defects in the ceiling and communications;
flood protection from above;
the possibility of mounting different lighting devices.

The main advantages of tension structures.

However, it is worth mentioning some of the flaws of this material in order to objectively make a choice:

despite the simple installation, it cannot be carried out independently;
complete tightness and inability to "breathe" in a PVC film (this does not apply to fabric stretch fabrics);
the need for a seam when installed in wide rooms (if the width is more than 5 m);
limiting the power of fixtures;
the presence of a specific smell in the first days after installation;
low resistance to mechanical damage (sharp and cutting objects, etc.).

Important! When the fixtures are installed in the film, their subsequent transfer will be problematic, since a hole is made for each fixture. It can be glued, but such a patch will look unaesthetic.

Backlight Features

Lighting is an effective tool for visually changing the space, in addition, light helps to create the necessary atmosphere and mood, divide it into functional zones, and emphasize individual details in the interior. Stretch film allows you to set a soft, filling, pleasant light thanks to spotlights.

To illuminate the room, various types of lamps are used:

Incandescent lamps. Due to their heating, it is necessary to strictly control the distance to the stretch ceiling and carefully select the lamp power. With a power of 60 W, the distance to the surface should be at least 20 cm. Incandescent lamps, of course, are not used in spot lighting.
Halogen. Used for pendant and recessed fixtures, but again there are power limitations. It is important to choose an aluminum reflector so as not to highlight communications under the ceiling panel.
Energy saving. They heat up less, but have large dimensions, contain hazardous substances, therefore they are rarely used in residential premises.
LEDs (LED lamps). The most progressive and common version of the lamps is the minimum heating and the ability to choose any power.

Comparative characteristics of lamps.

As you already understood, standard lamps are not used for spot lighting. What are the other features of spotlights? The main ones are a small angle of light scattering, more precisely - 30 °, as well as a conical shape of the light flux.

Important: given the above features, you need to place the lamps relatively tightly, and their intersection beams should be higher than all objects in the bedroom. Compliance with this rule will allow you to get a uniform, good light.

Spotlights have a number of significant advantages: safety, budget savings, the possibility of zone lighting and creating a wide variety of design and atmosphere, the minimum amount of shadow in the room due to the dense placement of points.

What areas should be highlighted in the bedroom:

area near the bed;
workplace, if it is located in the bedroom;
dressing area;
ladies dressing table (usually it has its own backlight, but the general overhead light will also not be superfluous).

In order to obtain a beautiful stretch panel with effective and harmonious lighting as a result of the work done, it is important to adhere to the following basic principles:

It is important to think over the scheme of spotlights and calculate the required power before starting the repair and installation of the stretch ceiling, which we will discuss later. After installing spotlights and other fixtures in a stretch ceiling, it will be very difficult to change their location!
It is necessary to observe the distance when installing spotlights: 20 to walls, 15 cm to seams and 30 cm to other light sources.
In a classic interior, use, the location of the spot light should be symmetrical. For a more modern design, resort to asymmetry and combine lighting fixtures in an original way.
A good solution would be to mount spotlights with the ability to adjust the brightness - so it will be convenient to adjust the light for rest or work.
If desired, you can install spotlights with a different shade of light - delicate blue or purple.
If the stretch film is glossy, it will reflect light, so the amount of glare from the luminous points will double when the light is on.

How to calculate the quantity?

We have already mentioned that a very important step is to calculate the number of spotlights for a room. And this can be done based on the recommended norms of illumination for living quarters:

Illumination rate (measured in Lux per 1 sq. m)

Note: 1 lux = 1 lumen per sq. m.

For example, if you need to calculate the number of lamps for a bedroom of 20 sq. m, we multiply the quadrature by the indicator of the lighting norm from the table above: 20 * 150 \u003d 3000 Lx, that is, 3000 lumens. This means that you can purchase 7-8 spotlights with a power of 5 W, or 12 lights with a power of 3 W.

Luminous flux depending on the power of different lamps.

Important! This calculation is approximate and rather rough, since it does not take into account many factors (the height of the room, the shape of the room, the features of the appliances, etc.). In each case, the calculation must be carried out individually!

Design options

There are many options for designing a tensile structure with spot lighting. So, it can be one-, two- and multi-level complex structures. Lighting can be of different shades, with and without, with different dot patterns.

Video: spotlights, lighting in the interior.

Without central lighting

Often, the central lighting in the bedroom with stretch film and spotlights is not used, since the correct number of points completely provides high-quality and pleasant light. If spot lighting is the only light source in the room, it is important not to make a mistake with the power and number of fixtures, otherwise you can get too dark a room.

Possible design options and schemes:

This example shows a two-level stretch ceiling with spot lighting along the lower tier. Light fixtures are located along the long sides of the room. This arrangement is considered classic and suitable for most rectangular rooms.

Bedroom in mustard and brown shades.

This photo also shows a two-level light-colored stretch ceiling with a floating effect. The backlight is located on the side of the room opposite the bed. A sufficient amount of light is obtained due to the bedside lamp and (the effect of a soaring ceiling).

Modern black and white bedroom.

The following example shows the original version of the location of the lamps on the stretch film - the points are located along the long walls, and at the head of the bed there are larger and more powerful lamps in the form of a semicircle. With the help of such an original arrangement, it turned out to effectively focus on the bedside area. Lamps on the opposite side illuminate the TV area.

Bedroom with an unusual ceiling design.

The interior in the photo below is distinguished by tenderness, weightlessness, lightness - thanks to the location of the lamps around the entire perimeter of the lower tier of the stretch ceiling. At the head of the bed there is a ledge of a semicircular shape, framed by lighting. Also, additional lighting was obtained due to the installation of a “floating” false ceiling.

Delicate bedroom in bright colors.

The following photo shows an example of a concise, but very stylish design: on a single-level stretch ceiling, there are only two lamps on each side of the room, but they do not create the main light, but only an auxiliary one. The reading area is lit by a floor lamp, and the bedside tables are lit by hanging fixtures on each side of the bed.

Ultra-modern bedroom with a panoramic window.

In this example, a two-level design is shown, but without the hover effect. The central, high tier is decorated with a stretch film with a print, and spotlights are located on the sides of the room, focusing on the reading area near the chairs and the dressing room opposite.

Bedroom with printed stretch ceiling.

Below is another version of a concise, minimalistic and very stylish bedroom interior with a stretch ceiling and spotlights. The ceiling structure is matte, in one level, the lamps are arranged in several rows of three in each. Local light was obtained from bedside lamps and a device in the area of the table area.

Snow-white, light, modern bedroom.

However, the examples above are far from the only layouts for spotlights in suspended structures (in rooms without a chandelier). You can place points in a checkerboard pattern, wave, symmetrical shapes, crosswise. The illustration below shows other options for the location of the spot light:

Options for the location of spotlights without a chandelier.

with chandelier

Central lighting, together with spot lighting, can be used in cases where the bedroom is the only room in the apartment, which also serves as a guest room, work area. In this case, lighting can effectively zone the space.

Spectacular design of a stretch ceiling with spotlights.

Important! If the bedroom has the main lighting in the form of a central chandelier, it is necessary to accurately calculate the power and the required number of spotlights, depending on how you will use them - separately or together with the main light.

You can see other spot light placement ideas in the following illustration:

Spot lighting options with a central pendant chandelier.

Thus, a stretch ceiling with spotlights in the bedroom is a modern, practical and aesthetic option for decorating a room, which we showed in the examples from the photo. Stretch design with spot lighting opens up great opportunities in the implementation of design ideas and allows you to effectively illuminate the room for a comfortable stay in it.

Video: lighting in the bedroom, modern ideas.

Arranging the lighting in the bedroom so that it is both very comfortable and easy to manage is a rather difficult task. When solving it, it is necessary to take into account many diverse factors. This area of the apartment should be designed for night rest, so it is necessary to provide soft, calm light in it. However, due to the lack of free space, the bedroom is often made multifunctional, placing a workplace in it, which should have its own lighting.

Due to the fact that today it is possible to purchase lighting fixtures of various designs and any design, in the bedroom you can create all the conditions for a comfortable rest, and, if necessary, for work. But in order to properly organize the lighting in this room, you need to listen to some recommendations. It will also be useful to consider some projects developed and implemented in practice by experienced designers.

What is taken into account when organizing lighting in the bedroom?

When planning lighting in the bedroom, they take into account not only the convenience of its use, but also the distribution of lighting fixtures. The latter especially affects the visual comfort for human vision. The mood created in the room depends on how competently the lamps are chosen and installed.

However, there are other points that are important in creating the necessary perception of a room that has its own characteristics. Therefore, in each case, bedroom lighting requires an individual approach:

The first thing to evaluate when choosing the size and design of fixtures is the area of \u200b\u200bthe room. The larger the room, the more carefully you will have to choose lighting fixtures. However, if the bedroom has a small area, choosing lamps for it is also not easy, as they should not overload the interior design. Chandeliers, floor lamps, night lamps should be sized to some extent proportional to the area of the room.
The next important point when choosing lamps is their design. It is clear that it must match the style in which the room is decorated. So, a massive chandelier will look ridiculous not only in a small bedroom, but also if the room is decorated in one of the minimalist trends.

Another important condition is that it is necessary to correctly distribute the lighting into zones. But any room should have general lighting - it can be intense or subdued. Each owner chooses for himself which of the options is closer to him.

Zone lighting includes:

- lighting above the bed, comfortable for reading before going to bed;

- desktop or pendant lighting fixtures for the workplace or dressing table;

- mirror illumination, if it is provided in the interior;

- lamps for a cabinet, shelves or niches;

- if it is planned to equip a separate place for reading or doing needlework by installing a comfortable chair, then a floor lamp with an elegant lampshade, or a sconce mounted on the wall, can be installed next to it.

A beautifully illuminated ceiling can become a real decoration for the room, as well as for the complete relaxation of its owners. If its design consists of several levels, then each of them, as a rule, has its own backlight. For example, the central part, consisting of a stretch fabric, can imitate the starry sky in the evening and at night.
The tone of the light is also important. Warm shades are well suited for the bedroom, as it will have a calming effect on the psyche of a person preparing for bed. While cold shades, on the contrary, invigorate, knocking down a sleepy mood. It is clear that their abundance in decoration and lighting becomes undesirable.

Types of lighting in the bedroom

Now, having understood in general terms what you need to pay attention to when choosing lighting for the bedroom, it is worth considering in more detail its varieties.

It is rare when only the overhead light is organized in the bedroom. Usually all types of lighting are used in the complex.

At the same time, it is necessary to try to correctly distribute them, choose the shape of the lamps and the direction of the light flux. In addition, if in the living room several lighting fixtures can be included in the overall lighting system, then in the bedroom each of the zones should be switched on individually.

General lighting

General lighting in the bedroom involves the location of lamps on the ceiling surface, as well as along its perimeter, as they must spread light throughout the room.

Luminaires of various types can be mounted on the ceiling or built into a suspended, including a multi-tiered structure.

To illuminate a multi-tiered ceiling, either tubes or spotlights are most often used.

Recently, when arranging a ceiling consisting of several tiers, tension structures are increasingly used, which are illuminated from the inside by numerous LED lamps of compact size.

This option creates the effect of a starry sky when all other lights are turned off. There are a lot of options for stretch ceilings with a similar effect. They can be either light or dark in color, such as navy blue or even black. However, most designers recommend not to get involved in this direction, but to make the ceiling in the bedroom light. The fact is that the predominance of dark tones has a detrimental effect on the human psyche, depressing his condition.

You should not use massive chandeliers to illuminate the rest room, all the more so - fix them directly above the bed. This is not only a matter of aesthetics, but also of safety.

If, nevertheless, the interior suggests the presence of this lighting fixture, then you should choose a model with a ceiling that will scatter light over a white ceiling surface. Thus, you can achieve not only soft, eye-pleasing lighting, but also significantly save on electricity, since the white surface will effectively reflect the light falling on it.

All lighting fixtures mounted on the ceiling can be combined into one system and turned on from one switch or from its individual keys.

Local lighting

As mentioned above, this room can be divided into separate zones - working and sleeping.

Sometimes the division of a room is done by installing a partition. In this case, ceiling lighting can also be zoned, that is, the bedroom and work area have separate lighting fixtures. If the bedroom is used by two family members, which most often happens, this option will be especially convenient, since the light above the workplace will not interfere with those who are resting at this time.

In addition, each bed, as a rule, is equipped with a sconce mounted on the wall. Sometimes, both devices are used in combination, and are used alternately, when which is more convenient.

Another option for bed lighting is soft wall lighting. This design looks beautiful and is convenient, but not always. It does not contribute to creating an atmosphere of relaxation. If a similar method is chosen to illuminate the sleeping area, then it is additionally necessary to provide narrower lighting, which will be intended for only one user.

Another area that needs lighting is the dressing table in the bedroom. Here it is necessary to choose ones that will illuminate the face well, but at the same time - they will not hit the eyes. The light should be intense but soft. In this zone, the lamps are most often fixed on the wall on the sides of the mirror, or two table lamps are installed in the same way.

Another option would be lamps installed directly around or on both sides of the mirror surface.

An excellent way to illuminate the table can be a lamp with adjustable light direction. It is she who will help solve the problem of poor lighting when applying makeup or simply putting yourself in order.

Quite often, the bedroom provides a place for privacy, where you can safely do your favorite needlework or view correspondence. For this purpose, a comfortable chair and a small table are installed in one of the corners. This area also requires lighting, and a floor lamp with a lampshade made in a design that matches the style of the room is often used for it. In addition to it, a table lamp can also be selected.

Decorative lighting

Decorative lighting is used in the bedroom to create a special mood for relaxation or for a special romantic setting. This kind of lamps can be made in the form of a table lamp, niche lighting, or they are fixed on the wall, ceiling, and even

If you want to have a similar lighting option in the bedroom, then it is best to opt for a table lamp. It can be turned on as needed, and also, if desired, transferred to another room.

There are lamps with the effect of the play of shadows, reproducing various compositions. Therefore, for a specific design of the room, you can choose the appropriate option. Whichever one is chosen, it will be able to create a spatial 3D effect in the room at no great cost.

If the means and possibilities of the room allow, in the bedroom, as well as in any other living space, illuminated aquariums can be used as decoration. These interior accessories contribute to relaxation and have a very good effect on the emotional background of a person.

bed lighting

Another type of decorative and functional lighting is the installation or tubes under the bed. This type of lighting can also be attributed to zonal lighting.

For such a selection of the zone, white or another color suitable for the interior and mood can be chosen. Thanks to the lower illumination, the space of the room visually expands, it is given a different shape, the overall appearance changes.

Some owners install a lower backlight in combination with a motion sensor, which is also quite convenient. When entering a room or getting out of bed at night, the backlight turns on automatically, gently and without disturbing the other person, illuminating the path. Therefore, you do not have to look for a switch in the dark, bumping into furniture.

LED fixtures used to illuminate the floor around the perimeter of the bed give a soft, pleasant light. Thanks to their such arrangement, it will not hit in the eyes, interfering with the resting partner.

Lighting strips or tubes can be attached to the bottom of the bed or along its side walls. Before the final fixing, it is worth trying on both one and the other option to your bedroom, choosing the most suitable one.

Where to place switches and sockets in the bedroom?

For comfortable use of this rest room, it is important to properly organize lighting control, that is, it is convenient to install switches and sockets for yourself. As a rule, stationary sockets and switches are planned and installed during repair work. Therefore, the arrangement of furniture and the use of certain electrical appliances in the room must be determined in advance.

Optimum outlet placement

Depending on where lighting and other devices will be installed, and on how many of them are needed, the location, type and number of outlets are selected. Therefore, before purchasing these products, it is worth making a list of electrical appliances that are supposed to be installed in the bedroom. In this case, it is worth adding two or three more units to the resulting quantity.

In addition, it is necessary to determine the type of sockets required.

Today, a mobile phone or tablet is a constant companion of a person. Therefore, it is easy to guess that during the rest the phone will be somewhere near its owner, usually on the bedside table. This means that it’s a good idea to have a special socket next to the bed to recharge gadgets. By the way, it can go in a complex and with a standard power one on the same panel.
Ordinary power outlets next to the bed will also be required to connect a table lamp or sconce, and sometimes both devices if they are planned to be used in a complex.
The floor lamp and table lamp also require power points. If you plan to organize a corner with a chair for privacy, then next to it it is also necessary to provide a block consisting of at least two to three standard sockets. In this area, it is best to place the power points so that they are hidden behind a chair or table, that is, at a height of 250÷500 mm from the floor.
When arranging a workplace in the bedroom, you will need a complex of sockets of various types.

Today, manufacturers offer various types of sockets that can be mounted in a computer desk in different ways. If this method is chosen to provide power to computer equipment, then it is enough to have one or two standard sockets on the wall. Devices built into the table will be connected to them.

Table sockets are equipped with special covers that make them safe.

Another device that is difficult for a modern person to do without is a TV. Therefore, today this device is installed in almost all bedrooms. The socket for its connection is best placed directly behind its body, and it does not matter whether it is installed on a cabinet or fixed with a bracket on the wall.

A new modification of the TV will require several standard sockets, as well as a special socket for connecting a LAN cable.

If you plan to equip a bedside downlight with a motion sensor, which must be permanently connected to the network, you will need another power point.
Additional, non-permanent outlets will be required if you need to turn on a fireplace in the room or a fan, humidifier or vacuum cleaner during cleaning.

At what height is it better to install the outlet? This question also arises during the repair. If the owners of the apartment believe that the power points will spoil the look of the interior, then it is best to hide them behind furniture accessories or build them into the floor. However, if you plan to use them often, that is, connect and disconnect devices to them daily, then free and convenient access should be provided to them.

To connect table lamps, as well as various gadgets, it is most convenient to mount sockets at a height of 650÷900 mm from the floor.
For a floor lamp, you can place the socket on the plinth or in the wall at a height of 300 mm. To make the cable of the electrical appliance less noticeable, it is folded and secured in this position with a tie.
Next to the bed, sockets are mounted at a height of about 200 mm from the surface of the bedside table or 300 ÷ 350 mm from the floor.

Switch location

Switches in the bedroom can be installed at different heights - this parameter depends on the desire of the owners of the premises. As a rule, the height can vary from 900 to 1500 mm.

If the switch before the repair was installed, for example, at a height of 900 mm, and in connection with this, all residents developed a stable habit of such an arrangement, then it probably does not make sense to change it during renovation.

The switch is installed next to the frame of the entrance door to the bedroom, at a distance of 100÷120 mm from it. The door leaf in the open position must not cover the device. And this means that the switch must be located on the side of the door where the handle or lock is located.

In a bedroom with any distribution of lighting, a switch with brightness control (dimmer) will be useful. It will allow, if necessary, to illuminate the room not at full capacity, at a time when someone is resting in the bedroom.

If the ceiling lighting consists of several types of lamps, then it is best to provide a switch for each of them, or install one with two or three keys.

If the bed is not equipped with a light with a motion sensor, it will be convenient to fix the switch next to the bed so that you can turn the light on and off without getting up. For this, a combination of so-called through and cross switches is used. One is located at the door, two more - at the head of the beds. But everyone can equally turn on and turn off the general lighting.

Optimize your lighting system - install walk-through switches!

Outwardly, such a device is practically no different from the usual one, but has a slightly different device. How it works and how it is switched to the apartment lighting system - read in a special publication of our portal.

Bedroom interior designs with different lighting methods

In this section, we will consider several options for bedrooms, decorated in different design directions and differing in lighting systems. "Trying on" the proposed ways of distributing electric lighting fixtures to your bedroom, you can choose the appropriate scheme for the planned interior.

It must be remembered that the color scheme used to decorate the room will directly affect the lighting effect. Therefore, in order to achieve the desired result, it is recommended to adhere to the colors used by the designers in the projects shown.

First option

I would like to start right away with the most popular way of allocating space in the rest room - to the sleeping and working areas. Accordingly, zonal lighting is also planned. The popularity of this project is explained by the fact that it significantly saves the area of the apartment.

The interior of the room is made in warm, but rather dark colors of natural wood. The sleeping area of the room is located in the part of the room with natural light, which allows you to equip a simple system of lower lighting. In addition, the presence of a window will greatly facilitate the morning awakening, as the "biological clock" of a person works in harmony with nature.

As a chandelier in the recreation area, a lamp built into the stretch ceiling with a stylized lampshade of an unusual shape was used. In addition to it, also installed in the ceiling surface, there are lamps lined up in a row along the line farthest from the window. Due to the fact that the lighting fixtures have swivel mechanisms, you can create different lighting options, which can significantly change the design of the room.

Soft color shades, well combined with light colors of textiles, create a favorable atmosphere for the psychological and physical relaxation of a person.

The working area of the room, in turn, is divided into a computer and a sofa area. The latter can serve as a place for daytime rest, for doing needlework, watching the press, reading. Therefore, it is equipped with a separate backlight, which is used as two lamps with a luminous flux directed towards the sofa.

The two-tier ceiling in this area of the room has a more strict configuration, which emphasizes the business purpose of the zone. This is evidenced by the rectangular shapes highlighted by LED illumination. Along the perimeter of the suspended structure, the same adjustable lamps as in the bedroom are installed, allowing you to manipulate the light fluxes. Thus, a different perception of the atmosphere can be created in the room.

In general, this design option for the room can be called successful, as the designer managed to combine two functions in the room. At the same time, a person in the working area will not interfere with someone who is resting in the bedroom at that time.

Second option

This design option, made in light colors, has moderate soft lighting, which is quite enough for a bedroom with a relatively small area. The room has a two-tier combined ceiling. Its surface consists of two materials - drywall and stretch fabric, located in the central part of the structure, made in the form of a circle.

Here it should be noted that the geometric shapes used in the design of the premises, along with the color scheme, can give a special mood. For example, curved, rounded lines make the atmosphere softer and calmer. While straight and sharp corners give the room a certain formality that encourages action.

In the central part of the ceiling there is a compact chandelier with cascading pendants, the light from which is scattered over a stretch matte canvas, giving a soft one. And around the entire circumference with the same pitch, round spotlights are built-in. They not only emphasize the round shape of the central part, but also perfectly smooth the outer corners of the ceiling.

As nightlights, flat lamps of a fairly large size were used, which are fixed on the wall at the head of a double bed. The wall decoration has some glossy effect that can enhance the light from the sconce.

The color scheme chosen for this bedroom project, as well as the ornamental design of textiles, can be called very successful. Thanks to the successful combination of color and pattern, the interior looks respectable, despite the minimum number of furniture accessories.

Third option

The project is made in fairly intense color shades, but quite harmoniously matched to each other. However, when choosing a darker design option, you must remember that such a color scheme will require more light sources.

This interior has a ceiling structure consisting of three tiers, illuminated around the perimeter with LED strips. Thanks to this backlight, the depth of the structure is emphasized. Part of the ceiling illuminated by soft light is located above the bed. The darkened areas of the ceiling surface, which have a weak backlight, consisting of, the designer distributed around the perimeter of the room. Moreover, the luminous flux of these devices aimed at the walls serves as soft lighting for them.

Additionally, small table lamps are installed near the sleeping places.

The interior also provides for a workplace, and a table lamp was also chosen to illuminate it.

Be warned that the shades chosen for this bedroom get boring quickly, as they are difficult to dilute with elements that have fresher colors. Therefore, the best option for a rest room would be a proportional combination of light and medium-intensity tones.

Fourth option

If you want to create visual space in the bedroom, you can use plasterboard structures of unusual curved shapes. Moreover, they are mounted not only on the ceiling, but also on the wall surface.

In the example shown, the design of a two-tier ceiling is a combined version, consisting of plasterboard and a stretch ceiling. The central tension zone is equipped with lighting, which designers call the "starry sky". Such decorative lighting can be used both during the day and at night. The role of the main lighting is largely assigned to a series of built-in ceiling lights.

Rounded shapes, placed on wall surfaces to achieve the effect of expanding the space of the room, are equipped with LED lighting. It gives volume to flat elements and at the same time is an additional source of light.

This interior is made in light white and beige colors, which also contribute to the expansion of the space of the room. They are favorable for resting the eyes and for psychological relaxation after a busy day.

It is very important to choose the right textiles for the overall interior design. It can have shades close to the general mood or even contrast with them somewhat. However, the color orientation of the finish and the lighting chosen for the room should be in harmony with each other.

Fifth option

If there is a desire, while lying in bed, to admire the starry sky, then a stretch ceiling with this effect is exactly what is needed. A properly illuminated surface will expand the boundaries of the room and give the impression that there is no ceiling in the room at all. However, choosing this option for lighting the ceiling surface, it is necessary to provide for its complete shutdown. It is best to choose the option of switching off from two places - from the entrance door to the room and from the bed.

This bedroom project is made in a classic style. White shades predominate in the color scheme, contributing to the visual expansion of space. In addition, rooms decorated in light colors require fewer lighting fixtures.

Additionally, in the design of the bedroom, a gray-blue color was used, in which the wall sheathing at the head of the bed was made, as well as textile elements of the interior.

Since the selected flooring has a pattern that imitates white marble tiles with steel patterns, the bedside rugs are made in dark shades that create a color balance of the interior.

The stretch ceiling with an unusual pattern and internal lighting has a plasterboard frame, which also has built-in lamps aimed at wall surfaces. In keeping with the style, an elegant medium-sized chandelier has been chosen as the top light.

Table lamps with light shades are perfect for both color and lighting design of the room.

And another element that also contributes to the expansion of space is a highlighted false window, behind which a niche can be hidden. Or it is made simply as an element of decorative lighting.

* * * * * * *

So, the lighting in the bedroom, as well as the color scheme, should have calm, relaxing tones. They are able to create a comfortable atmosphere for daytime rest and night sleep. You can not deviate from the chosen style, as the lighting fixtures must match it both in terms of external design and light intensity.

In addition, it is very important to create a comfortable control of the lighting system, which includes a convenient location of switches and sockets. The automated switching on and off of individual lighting devices is also welcome.

So turn on your creativity “to the fullest”, get acquainted with the proposed options, come up with your own. And let it help, in addition to the examples shown above, there will also be an interesting video selection of bedroom lighting projects.

Video: Interesting modern ideas for organizing lighting in the bedroom

There is a lot of information about how to choose furniture for the bedroom, what color it is desirable to use for decorating the walls, and how to choose curtains, but the design of the ceiling surface somehow receives little attention, and completely undeservedly.

This omission needs to be corrected immediately, because the desired atmosphere is also created thanks to the ceiling, including.

Each of the currently existing types of ceilings has its own nuances, and it can become both an interior decoration and its bad taste.

Standard

Until recently, the ceiling in the bedroom was of a standard form - first well-plastered, then puttied, and, in the end, whitewashed.

No fantasy. A little later, they began to use paint instead of whitewashing, but this did not affect the appearance of the ceiling surface in any way.

A standard white ceiling can still be used to finish the ceiling today, but more and more interesting finishes are being used instead.

Why? The fact is that the coloring does not pass without preliminary time-consuming surface preparation.

To slightly diversify the design of the ceiling in the bedroom, it is pasted over with wallpaper.

Adhesive

Ceiling decoration is often performed with plates made of a material such as polystyrene foam. The varied texture of the plates, and therefore they easily imitate stone, wood and stucco molding, by coloring.

It is worth considering the fact that the material is not environmentally friendly, and therefore it is not rational to use it in the bedroom.

Suspended ceiling

In the bedroom, false ceilings are very common, because they are not boring, they are diverse. Favorite ceilings - made of drywall.

The ceiling made of plasterboard hides all existing surface imperfections. In addition, the advantage of using such a finish is that it is not necessary to level the surface.

The ceiling increases sound insulation, bringing zest to the interior. The color of the ceiling in the bedroom can be any, thanks to which individuality is introduced into the room.

With low ceilings in a room, it is important to remember that false ceilings "steal" space. To "lift" the ceiling, you need to pay attention to the light design of the ceiling.

The lucky ones are all owners of high ceilings, because there is a place where fantasies can roam, it is possible to make a two-level ceiling in the bedroom, thereby zoning the space.

Stretch ceiling

Such beautiful ceilings in the bedroom, like stretch ceilings, are no longer a curiosity, as they used to be, but a familiar element of decor. Remarkably, the installation of such a ceiling is quick, easy, without dust and debris.

Ceiling care is elementary, and it is also safe and environmentally friendly. A ceiling with a glossy surface visually increases the area of the room, reflecting light, and a matte canvas is rough, and therefore absorbs all the rays.

Stop thinking about which ceiling is better in the bedroom - definitely a matte stretch ceiling.

Combined ceiling

The design of such a ceiling perfectly combines such finishing materials as drywall and natural wood, which are combined with wallpaper.

Enormous scope for imagination, and most importantly, to know everything in moderation. The interior of the ceiling in the bedroom should be in harmony with the surface finish of the walls.

Tricks

It does not matter what materials are applicable for finishing the ceiling surface, to achieve a stunning result, you should know about the following tricks:

If the ceiling is low, then with caution you need to choose a stretch ceiling.
When the room is dimly lit, the ceiling should be simple.
If the room is small, then you should not pile it up with a textured and artsy ceiling.
Illumination of the ceiling in the bedroom allows it to play with new bright colors.

ceiling decoration

To bring a romantic mood into the room, a so-called alcove is created using a canopy.

Its basis is a frame that is mounted on the ceiling, and on it lies a light pastel-colored fabric.

Increasingly, the surface of the ceiling is decorated with a “starry sky”. How? The simplest option is a stretch ceiling with a photo print of the sky.

The “sky” in this case is static, as it were, and if you make the backlight with the help of lamps, you can achieve a completely different effect.

It does not matter which ceiling you decide to choose, remember the main thing - the purpose of the room is rest, healthy sleep, and therefore it is not always appropriate to chase trends, it is not always necessary to follow fashion.

Look on the Internet for a photo of the ceiling in the bedroom, and choose for your room the option that will look most appropriate.

Photo of the ideal ceiling design in the bedroom

Stretch ceilings are increasingly common in modern apartments. Thanks to them, you can organize interesting lighting, which will serve not only to supply light, but also to create a cozy atmosphere in the room.

The lighting design of the bedroom will largely depend on what type of stretch ceiling is installed. Let's take a look at what the options might be.

Types of stretch ceilings

There are three main types of stretch ceilings:

glossy;
matte;
satin.

Also, stretch ceilings with additional decor can be distinguished separately.

Glossy ceilings

Ideal for small rooms, as they have the ability to reflect light, thereby visually increasing the space. Light sources in the room are reflected on the mirror surface of such a ceiling.

Matte ceilings

They look like a perfectly flat surface (although the same applies to glossy canvases, but the latter look a little different due to the reflective effect). Matte canvases do not reflect light.

satin ceilings

Combine the features of the previous two types. They can change their appearance: in daylight they look completely different than in electric light. Thanks to this feature, individual zones can be emphasized with the help of lamps.

Ceilings with additional decor

Stretch ceilings can be not only plain - if the client wishes, any image can be applied to the canvas. Here you can use lamps to create decorative effects. For example, a picture of the starry sky can be brought to life by careful selection of lighting.

Types of lighting fixtures

When choosing fixtures, you need to understand whether they will go well with your stretch ceiling or not. Consider the features of popular types of lighting fixtures.

Most often for lighting a bedroom they buy:

floor lamps;
chandeliers;
Spotlights;
LED Strip Light;
fiber optic strands.

All of them can be used in a bedroom with stretch ceilings - alone or in combination with other types.

Chandeliers

Chandeliers are not so common in the design of a bedroom with a stretch ceiling - this is not the room where bright light is needed, besides, it is enough from spotlights. The main requirement is light weight, as massive lighting fixtures are not suitable for stretch ceilings. There are chandeliers with shades that are directed upwards - they scatter light across the ceiling, emphasizing the beauty of the stretch ceiling. Chandeliers are not suitable for ceilings with an image, as they disrupt the perception of the picture.

Spotlights

The most common type of stretch ceiling lighting. They are wall and ceiling. As a rule, they are installed along the perimeter of the ceiling in a drywall box. It is important to consider that spotlights can emphasize the flaws of the ceiling. If desired, you can divide the lamps into several groups, which will turn on independently of each other.

Sconce

Such a lamp is often installed on the walls near the bed - this is very convenient if a person likes to read before going to bed. They can be installed on both sides of the bed - one of the spouses can sleep, while the other reads a book under the light of a sconce located on his side of the bed.

Floor lamp

It can serve as a source of additional lighting, for example, near the bed. Also, a floor lamp can act as the main source of light in a room instead of a chandelier - it all depends on the power of the lamp.

LED Strip Light

Mounted in a box along the perimeter of the room, it cannot serve as an independent source of light, but it gives the bedroom a cozy atmosphere thanks to soft lighting. LED strip can replace a night light.

fiber optic threads

Used to create realistic images on the ceiling. For example, the image of the starry sky in this case will flicker, making the ceiling look like a real space.

Choosing the right lighting concept

What is useful to know when creating lighting design is the basic approaches to lighting rooms. Currently, 2 popular concepts can be distinguished: American and European.

European

It provides ceiling lighting in the form of a large chandelier and additional light sources, smaller in power. In this case, separate areas of the room and elements are not distinguished. This option is not the best for a bedroom with a stretch ceiling. However, it can be used to create some interior styles, such as classic, rustic or romantic. Also, a chandelier of the original form can be interestingly combined with the ceiling and other lamps in a modern interior.

American

With this concept, spotlights are installed on the walls and ceiling. Sconces, floor lamps, night lamps are used as additional light sources. With a large number of lamps, it is possible to achieve a cozy atmosphere. This concept is ideal for rooms with stretch ceilings.

Creating a bedroom lighting design (examples)

Glossy ceiling:

1) sconces on the sides of the bed, spotlights along the perimeter of the ceiling;

2) the image of the starry sky on the ceiling in combination with LED strip and spotlights around the perimeter of the room;

3) chandelier in the center of the ceiling, LED strip, spotlights.

Matte ceiling

1) a chandelier in the center of the ceiling and spotlights around the perimeter, sconces;

2) spotlights in combination with LED strip;

3) chandelier, LED strip, spotlights, wall lamp, floor lamp.

satin ceiling

1) chandelier and spotlights, sconces or floor lamps by the bed;

2) ceiling lights, LED strip;

3) sconces, ceiling lamps.

Light sources can be located in different ways. Often, stretch fabrics are combined with drywall, which makes it possible to create multi-level ceilings with an original arrangement of lamps that can brighten one or another area of the room.