Before buying a new washing machine, we always carefully select the place where it will stand. But after the machine is installed and you need to properly connect the washing machine to the sewer and water supply, it may turn out that the hoses are short. Today we will talk about what to do in a situation if the drain hose is short. How to extend the drain hose in the washing machine in such a situation? In fact, everything is simple and you should not worry, because you can do it yourself, without disassembling the washing machine.
Drain hose extension for washing machine
Washing machine manufacturers put standard drain hoses about 1.5 meters long on their products. In most cases, this is enough, and if you plan the sewerage supply to the washing machine correctly or install a hidden siphon for the washing machine, then there should be no problems with the length of the standard hose. But it often happens that the hose is too short, or the sewer pipe is too far away and the standard length is not enough. What to do in such a situation?
In order for the drain hose to become longer, there are two ways that are difficult to implement:
Method one: you can buy a longer one piece hose and replace the whole hose. But in this case, you will need to tinker a bit and unscrew some parts of the washing machine. In some models of washing machines, this is easier to do, in some you even have to remove the front wall. Therefore, this option for extending the drain hose is not very convenient and is not suitable for many. And why actually mess around, if you can make everything much easier.
Method two: You can simply buy an additional hose for the washing machine and a connector in the store. With the help of which to lengthen the drain. It is this method that we will consider in more detail.
Choosing the length of the drain hose
You can buy a drain hose for a washing machine at almost any plumbing store or home appliance store. To do this, first measure the missing length of the new hose. To do this, take a tape measure and figure out how the hose will go from the machine to the sewer itself. Measure so that the tape measure is free. The hose should not be tightly connected, so leave a small margin.
In the store you can find drain hoses of various lengths: 1m, 1.5m, 2m, 3m, 3.5m, 4m, 5m and even modular drain hose.
Modular hose is a large coil of hose, which is divided into modules of 0.5 meters. You can order any required length in multiples of 0.5 meters, and the seller will simply unwind the required length and cut it off.
In our case, the best option would be to buy a hose with a fixed length, since it is much easier to find it in a store.
Attention: Do not try to buy the hose of the longest possible length. The drain pump needs much more effort to pump water over a longer distance. In general, you should not make a drain hose with a total length of more than 3.5 meters.
Once we have decided on the length of the hose, we need a special connector that will allow us to join the two ends of the drain hoses. It is a small plastic tube, on which both ends of the hose are put on and tightened with clamps.
Washing machine drain hose clamps can be purchased at any auto parts store. The dimensions of the clamps should be 16×27mm. I would like to separately note that the ends of one drain hose come in two different diameters. One is 19mm in diameter, the other 22mm. It is common to connect the thin end coming from the washing machine to the thicker end of the extension hose using connectors with 19 x 22mm carved diameters at the ends. But if you connect the ends of hoses with the same diameter, then there is a 22x22mm connector.
You can make a connector from any plastic tube of the appropriate diameter. It will serve exactly the same as the purchased one. Don't forget to secure it with a clamp.
Extending the drain hose
Let's check again if we have everything to make the washing machine drain longer:
- Extension hose
- Connector
- Clamps
- Screwdriver
If we have all this in stock, then we get to work. First, put the clamps on both hoses, then insert the end of the hose coming from the washing machine into the connector. After that, insert the other hose into the second end of the connector.
Now we tighten the clamp with a screwdriver, do not overdo it. It is enough just to fix the hose so that it does not slip off the connector.
After you have extended the drain hose, you can connect it to the sewer and run a test wash.
When draining the washing machine, make sure that there are no leaks at the connection. But we are sure that everything turned out well for you and nothing will flow. Recall that clogging of the drain system will entail
Specialization: master of interior and exterior decoration (plaster, putty, tile, drywall, wall paneling, laminate, and so on). In addition, plumbing, heating, electrical, conventional cladding and balcony extensions. That is, repairs in an apartment or house were done on a turnkey basis with all the necessary types of work.
If you need to know how to connect a washing machine to the sewer, then you have come to the right place to come for advice. I want to talk about two main methods that are generally possible to apply in this case. In addition, I will explain the features of the tie-in, and also suggest that you watch the video in this article.
Two methods
There is another, third way, which you see in the photo above.
But this is no longer a connection, but simply fixing the hose with a U-shaped adapter over the side of the bathroom.
Such a U-shaped fitting is included with every automatic washing machine.
Method one
It is not for nothing that I focus your attention on the machine, since the water is drained there forcibly. Therefore, the entire instruction that will be below refers specifically to this type of washing machine:
- on the plumbing market, siphons for sinks, sinks and bathtubs are currently on sale with an additional outlet for connecting a hose 22 mm in diameter;
- we can say that it is precisely such siphons (with an additional outlet) that are offered much more than ordinary ones;
- if you install such a siphon, but for some reason you will not connect the washing machine, then the output can be closed with the plug that comes with the kit.
Method two
But the correct connection of the washing machine to the sewer directly into the pipeline may differ slightly:
- the hose, which is designed to drain water in the washing machine, has a diameter of 22 mm, but there is no special socket for bends to 50 mm or 32 mm pipelines;
- therefore, a rubber reduction with a transition of 22 mm is used here for connection- its price is rather symbolic, but the device is fully consistent with the purpose - it is convenient and airtight;
- if your washing unit is in close proximity to a 50 mm sewer pipe, then of course you will crash into it through a tee;
- but if the machine is located at the other end of the room, then a 32 mm PVC pipe should be used, connecting it to a 50 mm outlet;
- in such cases, the scheme for connecting the washing machine to the sewer does not require the installation of the 32nd pipe under a slope, since the drain is forced here;
- The 32nd pipe into the outlet socket of the 50th is also connected using a rubber reduction.
The drain hose for some units has a diameter of 19 mm on the machine side and 22 mm on the pipeline side.
Features of connecting a washing machine
First of all, you should know if your washing machine has a check valve on the drain that only allows water to flow in one direction. Only in this case you will be able to figure out how to properly connect the washing machine to the sewer.
If such a device does not exist, then the manufacturer must indicate the height level at which the hose loop should be - a water loop is created in this area. This closure mainly serves to prevent the leakage of unpleasant odors that may pass from the sewer through the machine.
In the latest models of automatic washing machines, for the most part, a check valve is provided, so in this regard there should be no questions about how to connect the hose. Your task is only the correct connection of the end pipe (it is smooth, without corrugation) with a rubber reduction or with an additional siphon outlet.
In order not to damage the rubber reduction, I usually lubricate it with liquid dishwashing detergent - this way it is easier to pack it into a socket and stick a smooth pipe into it.
If the connection is made through an additional outlet of the siphon, then there you just need to remove the tube that is inserted there from the factory and install a hose pipe instead. To seal the connection, there is a coupling - in the image it is indicated by the number 8 - it presses the cone gasket, which, in fact, provides a seal in this place.
That is, the tube that is in this siphon from the factory is installed there more to keep these parts in working condition.
If the standard drain hose does not reach the tie-in into the sewer, then it can be increased by adding a piece of the desired length and connecting these fragments with a fitting with insurance with steel clamps 16 × 27 mm. As I said, the end pipes can have different diameters, which is why there are connecting fittings for two options - you can see them in the top photo.
There are also modular hoses on sale, where each of the fragments has a length of 0.5 m, so that you can fulfill any requests. But at the same time, do not forget that the longer the outlet, the more difficult it is to cope with the water supply.
Water connection
In this case, oddly enough, connecting the unit to the water supply is much easier than to the sewer, since here, in fact, there is no choice. In any case, the pipeline with the water supply must be located near the automatic machine and it must have shut-off valves in the form of a straight or angle valve. There are two clamping nuts on the hose itself, therefore, on the machine itself and on the shut-off valves there must be a fitting with an external thread.
It is noteworthy that the nuts are designed for a 3/4 inch diameter, therefore, the valves must have exactly the same thread. But if a special tap that is designed for this purpose is done at 3/4, then the plumbing most often has 1/2 inch. Therefore, in some cases, a reducing fitting will be required for connection.
Conclusion
In fact, connecting the unit with your own hands to the sewer is quite simple, if at the same time all the connections are made carefully, that is, tightly. But if you still have a misunderstanding in this matter - ask about it in the comments.
When buying a machine, we almost always know its future location. But it often happens that due to size or for other reasons, the place changes. The first difficulty that SM owners face is the long distance from communications. Therefore, today we will talk about whether it is possible to extend the drain hose of an automatic washing machine, and how to do it correctly.
Before extending the hose, you must understand its parameters. Remember: in no case should it be raised higher than 1 meter so that the drainage pump can normally pump out waste water from the tank. If you neglect this recommendation, the low power of the pump will not be enough to drain, the water will linger in the tank.
During connection, you must take care of the free tension of the tube, especially paying attention to the top point. It should be 60 cm higher than the lowest point. This is typical for all cars, regardless of brand and model. But still, if you have everything calculated up to a centimeter, you need additional information. To find out the exact value, look at the user manual - everything is written there. If nothing is indicated in the manual, look for other technical documentation for the CM.
Usually the maximum length of the hose does not exceed two meters, and more often it is only one and a half. If the tube is much shorter, or the standard size is not enough for you, you can go for a trick - instead of lengthening the drain hose, get a new one of sufficient length.
Attention! You can buy the part in a store specializing in the sale of plumbing, or in a service center. If you did not find what you were looking for, go to "online" - find the desired part on the Internet.
To replace the part, you have to disassemble the case. If you are not ready for such a radical action, there is a simpler solution - connecting 2 washing machine hoses. To build a drain hose, take:
- Another new detail.
- Quality clamps.
- Connector for drain hoses.
In principle, you can save on clamps if the connection is tight. But to make sure of this, you will have to visit the store repeatedly - first buy a connector, and then clamps, if there are doubts about the tightness. Also, clamps will come in handy without fail if you can’t pick up a connector.
If you bought a connector
- Fix the hoses in the connector on both sides.
- Secure with clamps.
- Install on the machine and sewer.
- Run a test wash, if everything is fine, the machine can be used.
Without connector
- Find a plastic or rubber tube. Its size should be such that it fits on both hoses.
- Buy clamps.
- The tube is put on the hoses so that they converge in the center. The tighter the tube sits, the better.
- Use clamps for a tighter fit.
If you do not have enough allowable length of 3.5 meters, then there are other ways out of the situation:
- Install equipment closer to communications.
- Zoom in on the drain.
Want to visually see how to extend the drain hose? We offer video:
Having figured out how to lengthen the drain of the washing machine, you have solved only part of the problem. But you still need to figure out what to do with the water inlet hose, if its length is also not enough. About all this - below.
Not sure how to extend the inlet hose? Everything is extremely simple: instead of building up a water supply hose, buy a more authentic part. It is sold in the same place as the parts for the drain system. To change the part, disassembly of the SMA is not needed. Proceed like this:
- Disconnect the SM from the water supply, if it was connected to it.
- Unscrew the fasteners (manually, without tools, so as not to damage the plastic fasteners).
- Installing a new item. When tightening the fasteners, do not use tools - do everything manually.
- Open the valve and check the tightness of all connections.
- If everything is fine, proceed to washing. At least for testing.
If you can’t find a hose of a suitable length, you can lengthen it. Usually the water supply hose is extended by the second of the same element, but you will need an adapter. Use a 3x4 inch brass nipple. To extend the hose for the water supply to the washing machine, simply screw the nipple on each hose, and that's it - the job has been done successfully.
If you had to add or change parts, do not forget to check if your typewriter has enough cord to connect to the mains. If the cord is too short, or vice versa - the outlet is far away, then you need to pay attention to this moment. It is better not to use extension cords to connect the washing machine to the mains. This is fraught with serious damage: such extension filters often provoke a fire. 
Now you know how the drain and intake hose of the washing machine is extended. And wherever your washing machine is, you will always find a way to successfully connect it to all communications.
Washing machines have long been indispensable household appliances for most people. But in order for them to perform their functions, moreover, uninterruptedly and in full, it is necessary to ensure the possibility of draining contaminated water.
The easiest way to do this is with a regular hose included in the package. However, it is more practical to use a siphon for a washing machine, which will provide a number of important advantages. We will talk about how to select and install an important and convenient sewer device.
The process of removing contaminated water after washing must be organized correctly. For this, an important device called a siphon is used, which is able to uninterruptedly ensure the draining of any required amount of liquid.
Moreover, at the same time with such an operation, a number of important tasks are performed, including:
- Preventing the ingress of odors, gases from the sewer into the premises. This is achieved by using a water seal, which is a water plug that completely covers the desired section of the pipe along the entire diameter. Moreover, this structural element performs its functions, even when the washing machine is not used for a long time.
- The exclusion of the formation of plugs in the drain system, and, if this does happen, the design of the siphon will provide an easy and quick cleaning procedure.
In addition, many siphons are capable of filtering large particles of debris. This additionally helps to prevent the possibility of clogging the sewer, requiring. Still, such a solution can save valuable items forgotten in the pockets of any washable items.
Any siphon for draining / draining water from a washing machine is a plastic or metal structure with a water seal that prevents odors from entering the housing
An important function is also considered to reduce the load on, which extends its life, and significantly. Is it mandatory to use it?
The washing machine is equipped with a drain hose with a device for forming a bend. It can replace the siphon, because. prevents the reverse flow of waste water, but at the same time, the contaminated liquid gradually spoils the enamel shell of the bathtub, sink or toilet bowl
Modern washing machines are equipped with drain hoses, which may well replace the siphon. The advantage of this method of water drainage is the ease of installation and operation.
Since all that needs to be done to prepare for the drain procedure is to run the hose into the bathroom, sink, toilet. Such a device is attached using a curved element - a holder attached to the hose.
If the indicated method has only one plus, then there are more disadvantages and they are more significant. So, if the hose is not connected to a sewer pipe, then the hose will have to be bent into an S or U shape.
The siphon does not have to be specialized, that is, the product for washing, dishwasher, which has an additional pipe for draining from the machine, will be able to drain contaminated water
As a result, the thin-walled corrugated product will be constantly under load. Which often leads to a violation of its tightness and related problems. And by abandoning the water seal, the owner of the washing machine runs the risk of saturating his home.
Often the distance from the washing machine to the outlet of the sewer pipe is impressive, and it is not possible to lay the drain hose correctly, that is, with a slope. As a result, the load on the pump increases significantly, which will lead to its premature failure.
When connecting a drain hose with a water seal formed by a bend in the pipe, it is necessary to provide a slope to improve the flow of water into the sewer
In addition, if the length of the existing hose is not enough, it is increased with the help of an additional piece of the same product and a coupling. Which also leads to an increase in resistance, which means an increase in the load on the pump.
Additional docking points for all parts of the drain hose are not sufficiently reliable and durable. As a result, a leak can start at any time.
While drain hoses are inexpensive and easy to replace, the fear of hurting yourself or your neighbors should keep washing machine owners from constantly using a hose, especially a misplaced one, instead of a siphon.
Due to these significant drawbacks, the use of a drain hose can only be a temporary solution. And it will be possible to properly organize the drain by connecting the washing machine to the nearest sewer pipe. If it is far, then it should be lengthened.
To connect the hose to the pipe, you should purchase a rubber cuff that levels the difference in the diameters of these products. In addition, this way you can achieve the desired tightness of the connection. In this case, the requirements of the instructions attached to the washing machine must be observed.
The laying of sewer pipes in a hidden way is quite rare in our country, because. building codes require free access to communications. However, the location of the connection point to the sewer behind a false wall is quite possible.
All of the above indicates that you can do without a siphon designed for, but this will not be the most practical and best solution.
Device selection guidelines
It is difficult to choose drain fittings only because of the low awareness of potential buyers with this type of equipment. But fixing this is not difficult, since there are only a few of its types, which greatly simplifies the task.
With the typical types of siphons used when connecting washers, the video will acquaint you:
These include the following siphons:
- outdoor;
- internal;
- combined.
Since each type has its own advantages and disadvantages, the interested person should familiarize themselves with them in more detail. This will help save time and money when buying.
The built-in type of siphon is installed in the wall. The product is usually supplied with an external decorative panel that allows you to hide the installation site.
Inexpensive and extremely unsightly
Typically, external siphons are used if a fairly large distance separates the washing machine and the nearest sewer pipe. This makes it possible to install in a convenient place and use for this purpose structurally simple products that are not distinguished by compactness or other technical delights.
An external siphon is used when there is no need to save space, and its unprepossessing features are not striking, for example, if it is hidden behind the washing machine itself, the bathroom
The disadvantages include the fact that external siphons do not make it possible to install existing washing machines close to the walls that people need. Therefore, in some cases, insufficient compactness can also be considered a minus.
Comfortable and affordable models
A feature of all internal siphons is their small dimensions and the fact that they are mounted inside the wall, for which special recesses are made. The above allows you to install washing machines close to any wall of the room.
In addition, internal siphons are distinguished by high aesthetic qualities. Their body is recessed into a pre-made cavity, and the outer part is closed with a decorative panel, which can be metal or plastic. Therefore, only the 90 °C curved compact fitting can be seen from the entire structure.
The use of a built-in siphon allows you to completely hide aesthetically unattractive knots. Outside, there is only a coupling or fitting for connecting hoses
The disadvantages of internal siphons are a relatively complex installation and a considerable cost compared to other types. In addition, they are much more difficult to dismantle, which causes some inconvenience when cleaning is necessary.
Universal combined option
Visually combined siphons do not differ from ordinary ones with the exception of only one moment. This is the presence in the design of several fittings, designed for the simultaneous connection of drain hoses belonging to various objects.
Such a product is versatile, therefore it is used for the simultaneous removal of contaminated water from washing machines, washbasins, kitchen sinks, dishwashers.
How to install a combined siphon is described in the following video, and it also indicates the advantages and disadvantages of this method of connecting to the sewer:
Differences in size and shape
For ease of use, all modern drain fittings differ in shape and size. This is done to ensure the desired performance, efficiency, clogging prevention, ease of installation, imparting sufficient aesthetic qualities, and other issues.
Siphons for arranging sewerage are now available in a wide range, which makes it possible to supply all points of connection of plumbing and household equipment to the sewer with a water seal
Therefore, if a potential buyer needs to save space when installing a washing machine, then you should pay attention to flat siphons. They have the most compact dimensions.
As a result, they make it easy to place the purchased washing machine under the existing washbasin. What is an effective solution, especially in small bathrooms. This type of installation can be an interesting design decision if a person chooses a matching appliance and sink.
The option of installing a washing machine under the sink requires the use of a special flat type of siphon, to which it is also possible to connect a washer drain
Check valve attachments
Although modern siphons successfully resist clogging, the formation of traffic jams, but anything can happen. Therefore, the buyer should take care of an additional degree of protection.
For these purposes, a siphon for a purchased washing machine with a built-in non-return valve is used. It is designed to solve a number of important tasks to ensure safe use.
Which include:
- Preventing the return of polluted waters when blockages form in sewer pipes.
- Exclusion of unauthorized draining of water during the washing process.
The presence of this valve is especially important for residents of the lower floors of houses. Since they are most affected by blockages in sewer systems.
The check valve is extremely simple in design, however, its use allows you to avoid the unpleasant phenomena of the reverse flow of dirty liquid into the pipes connected to the siphon
At the same time, a potential buyer of this type of siphon should pay attention to the fact that many washing machines are supplied with non-return valves already equipped. Therefore, in order to avoid unnecessary spending, this issue must be clarified in advance.
Preparing to buy fittings
To organize an effective washing process, you can use any type of siphon. The main thing to consider is ease of installation, use and aesthetic qualities. If the washing machine is located far from the siphon, and there is no question of saving space, then you can buy any of its varieties.
It is ideal when the drain fixture will be covered from view by something - a bathroom, a sink, a door, furniture, any other object. If the shapes of the siphon “hurt the eye”, do not add aesthetics to the room, and besides, there is no way to hide it, then you need to purchase a built-in product.
Such a solution will allow you to put the washing machine close to any wall the owner needs, to hide the drain fittings. This option will significantly improve the look of the room.
The combined siphon is the most versatile solution, as it allows you to connect any number of drain hoses to the sewer pipe
When it is planned to install under, then it will be right to purchase a flat siphon. It takes up a minimum amount of space, so it will easily allow you to complete your plan.
If a potential buyer plans to drain contaminated water simultaneously from 2-3 types of equipment, then the best solution would be to purchase a combined siphon that has the right number of fittings for connecting drain hoses.
If there is no check valve in the design of the washing machine, you should not save money on its purchase. The owner will not regularly benefit from it, but in a critical situation this product will save you from significant troubles and losses.
A flat siphon is the best option when the owner of a washing machine needs to save space in a bathroom or other room.
No need to save on the quality of the siphon itself, its components. Since their service life is always relatively short, and budget options remain operational for an even shorter period of time.
Installing Your Purchased Product
When installing a siphon yourself, you should always take into account a number of mandatory rules. Otherwise, it will not be possible to organize an effective drain of contaminated water, and this will also affect the performance of the washing machine.
The mandatory installation rules include the following points:
- the siphon cannot be installed higher than 80 cm from the level at which the washing machine is located - non-compliance entails a large load on the pumping device, which leads to its rapid wear;
- you should not extend the drain hose, such a solution will again lead to a significant increase in the load on the washing machine pump.
If you still had to perform an extension, then this should be considered as a temporary solution. The drain hose does not need to be thrown to the floor, as the pump will have to exert even more extra effort to perform its functions.
Therefore, the best way to solve the problem with the length is to connect the sewer pipe to the required distance.
The installation of any siphon is a simple operation, but this only applies to the situation when all preparatory work has been completed and communications have been connected
If this is not possible, then the hose should be laid along the wall with the necessary slope in order to ensure the gravity flow of water. In this case, the permissible loads will act on the pump, which means that the service life will not be reduced.
If you want to install the purchased siphon yourself, then you need to understand that this will be a simple operation only if the sewer pipes, sinks, washing machine, etc. are installed and connected. And the necessary preparatory work was completed, for example, a recess was made in the wall for a built-in siphon.
Installation and connection of the washing machine must be carried out in strict accordance with the manufacturer's instructions, the exact recommendations of which are given in the technical documentation for the product (+)
In addition, a number of features must be taken into account. For example, if the mentioned internal siphon is installed, and tiles are used to finish the walls of the bathroom, then the cladding is first performed. And only then a place for drain fittings is selected. Since work in the specified sequence will allow you to get higher aesthetic qualities.
If any of the above conditions is not met, then essential knowledge and a special tool will be required for installation. What makes the possibilities of an unprepared person limited.
Often mistakes are made that lead to financial losses. This indicates the need to use the services of craftsmen for complex work on wiring communications and other things.
The drain pipe from the washing machine must be connected to the sewer system at a strictly defined height, which may differ slightly depending on the brand of the machine, more precisely, on the capacity of the drain pump
Nevertheless, the usual replacement of the siphon or just the installation is quite simple to perform. Why you need to connect the product to the sewer pipe, and then bring the drain hose.
New gaskets must be used to ensure proper tightness. And after dismantling the old siphon from the sewer pipe, traces of contaminants must be removed from the hose.
After completing the installation procedure, carefully check the tightening of all available clamps, bolts, and other fasteners. Next, you need to drain the contaminated water in test mode.
Why toilet paper is placed under the siphon - such a simple solution will reveal even minimal leakage, which is not always possible to do visually. Therefore, verification should be carried out only using the specified method of control.
If a combined type of drain fitting is used, then it is worthwhile to simultaneously drain from all equipment in use. This will allow you to check the tightness and performance at maximum load.
This is how the drain hose is mounted to the sewer pipe, if there is a desire to save on the siphon, although this is not the best solution
If the testing did not reveal any leakage of the siphon to drain the contaminated liquid from the washing machine, then the owner can proceed to its normal use. And without any restrictions.
Conclusions and useful video on the topic
You can get acquainted with all existing types of siphons by watching the following video:
To choose the best option for a siphon, which makes it possible to uninterruptedly drain contaminated water from washing machines for a long time, it is enough to have a small stock of knowledge.
Since only a few types of drain fittings are produced and used by the owners of washing machines, which is quite enough to meet all needs. And also you should never forget that the siphon must be installed correctly.
Tell us about how you chose and installed a siphon with a pipe for draining dirty water from a washing machine. Share valuable information on the topic of the article. Please leave comments in the block form below, post photos and ask questions on points of interest.
The hose for the washing machine plays a very important role in the operation of the device. In order for it to serve its owners properly and effectively, water must enter the drum on time and drain after use. Both the drain and the inlet hose for the washing machine, at the slightest malfunction, can cause stops, malfunctions, which will gradually lead to a breakdown of the unit.
1
When buying a washing machine in most stores, delivery will be provided to you, but installation does not always go smoothly. Sometimes you have to invite the wizard to install separately or independently carry it out.
For the unit to work correctly, it is necessary to connect according to the following algorithm:
- connect electricity;
- provide water supply;
- provide an opportunity for its removal.
Connecting a washing machine
Preparation for installation is carried out as follows: the plugs fixing the washing drum are removed from the back wall, the holes from them are closed with special plugs. The machine is put in the place intended for it and the height of the legs is adjusted so that it stands level.
The first step is to ensure the supply of hot and cold water - this operation must be performed depending on the characteristics of a particular device. Sometimes the inlet hose for the washing machine is too short for your conditions. In this case, you will need to purchase an eyeliner for lengthening.
If it turns out that the diameters of the water supply and the water supply hose do not match, adapters will need to be used to connect.
2
The drain hose has a simple task - it ensures the discharge of waste dirty water into the sewer pipe during the washing process. The drain hose of the washing machine can be of different lengths, the cost varies depending on the type. The varieties are as follows:
1. The simplest type of this assembly unit has a fixed length, varying in the range of 1-5 meters. This size is considered standard, and if necessary, it can be easily extended by connecting two hoses using clamps.
2. The telescopic drain hose of the washing machine is more versatile - it is sold in a compressed state and can stretch up to 2 meters from an insignificant 60 centimeters. But it also has disadvantages: it becomes more clogged, vibrates when water is drained. It is necessary to stretch such a product as carefully as possible, since with sudden movements the material can be damaged.
3. The hose sold in the form of a bay is quite convenient - you can independently measure and separate the desired length from it (within the available one). Serifs are applied on the surface of the product, which can be guided when measuring the desired length. Usually it is about 0.5 meters. Do not use hoses that are too long to drain waste water - this increases the risk of blockages that can create stagnation and even cause clogging of the hose. This sooner or later leads to machine shutdowns, and in some cases to breakdown. If the hose is too long, it is easier to deform and may be damaged.
washing machine hose
As a rule, the washing machine is equipped with a gray polypropylene drain hose. At its ends there are rubber elastic fittings with a diameter of 19 mm, 22 mm. One end is connected to the sewer pipe, the other is attached to the unit itself. Sometimes, if the sewer pipe is located in a hard-to-reach place, the drain hose is directed at one end to a bathtub or sink.
3
Drain hoses are attached differently in different models of washing machines. But there are certain rules that must be observed before replacing or installing them, regardless of the brand of the unit.
To begin with, the device must be turned off from the mains. When doing this, make sure that the machine is not in working condition. If this is the case, you must wait until the wash cycle is completely finished. Fix the wire so that it does not interfere during operation.
Then the device must be disconnected from the water supply. When the flexible tube is unscrewed, it is necessary to remove the gasket in time and arrange it in a place where it will definitely not be lost. Where the drain hose of the washing machine was attached, install the plug, and put the hose upside down on the back of the device.
Disconnecting the device from the water supply
After the preparation for the replacement of the part is completed, you can proceed to the installation. To replace the hose, access to the inside of the unit must be provided. Most often, the hose is attached inside the housing next to the drain pump. The top panel must be removed - it is more convenient to work. The hose, as a rule, protrudes from the back of the washing machine: in its upper or lower part. To replace it, the hose is carefully disconnected from the housing and the pump and pulled out as carefully as possible.
A complete disconnection from the sewer is made, after which the remaining water is drained from the hose. Only now you can start installing a new one. This process may differ depending on the design, model of the unit. Therefore, in order to properly perform the work, you must refer to the manufacturer's recommendations.
4
The more carefully all stages of work are carried out, the longer the drain hose of the washing machine can last, which will ensure its uninterrupted operation.
When organizing a drain method, you should choose the one that is more convenient for installation.
For example, you can simply drain used water into a bathtub or sink. All required operations will be extremely simple to perform. The drain hose can simply be inserted into a special holder (supplied), and then hung on the bath or fixed over its edge. This method can be used as a temporary, as well as in cases where connection to the sewer is not possible. It also has its drawbacks:
1. When draining, all dirty water is in plain sight - this not only irritates clean housewives, but is also not particularly convenient. After the operation is completed, you have to wash the sink, and with a strong spray pressure, not only it, but also the walls.
2. The plumbing fixture where the drain is carried out cannot be used during the operation of the washing machine - waste water flows there from time to time;
3. If the bath or sink is made of acrylic or cast iron, they will constantly form plaque due to flowing dirty water. Such a surface is quite difficult to clean.
Tip: if the sewer system in the apartment is in good condition, and the machine will be used regularly and often, it is better to install a drain directly into the sewer pipe.
Installation of drains in the sewer pipe
To do this, you can choose one of the following methods:
A. Drainage of dirty water can be successfully carried out through a special outlet on the siphon. They are usually installed under sinks in kitchens or bathrooms, and it will be easy to connect a washing machine hose to them, wherever it is located. The drain end fitting must be fixed as securely as possible on the siphon outlet - this will not allow leaks to occur in the place where they are joined. To give the mount additional security, use clamps.
B. In another option, the drain hose is connected to the sewer pipe using a sealing cuff. In this case, the hose must be fixed in the cuff as securely as possible, and the length should be chosen in such a way that it has a small margin. The hose should not be too tight or easily pulled out of the cuff. During the draining of the liquid from the machine, strong vibration occurs, the connection is broken if the installation is poor, water will flow to the floor.
The second option is more convenient in cases where the owners want to equip the drain site next to the installed device. Most often, this procedure is carried out during repairs - when building modern houses, a site specially equipped for installing a washing machine is not planned.
It is possible to organize the discharge of water using a separate sewer siphon equipped with a check valve. It has a fairly simple principle of operation. Inside the siphon is a weighted ball. When water passes through the siphon, the ball floats, and after it drains, it sinks into place and plugs the sewer drain. This not only blocks the way for unpleasant odors, but also prevents the waste fluid from flowing back into the hose. Ideally, when it is possible to pre-select a place suitable for the location of the washing machine, and then install all the necessary communications there.
Using a sealing cuff, if desired, you can independently mount a siphon equipped with a check valve and get rid of many problems associated with operation.
Important: the point of attachment of the drain to the unit must be located higher than the connection to the sewer. Otherwise, all the water will flow back into the machine. To ensure reliable and trouble-free operation of the washing machine, make sure that it is installed in accordance with all the rules.
Loading...