Install a garden shower personal plot recommended in the following cases:

the country house does not have utility networks. The lack of running water significantly complicates the installation of a stationary shower indoors;
the garden house is used only for short-term recreation in summer period time. If you build a shower stall in such a room, then problems arise. big problems in preparation for her negative temperatures. It is necessary to completely remove water from the system, prevent freezing of pipelines, etc.;
in order to save energy. Water for a garden shower can only be heated by sunlight. If you want to expand the functionality of the shower stall, you can connect electric heating, but use it only in adverse weather;
financial resources do not allow the construction of expensive capital bathrooms.

The presence of a garden shower significantly increases the comfort of relaxation on suburban area, you can wash in it after working in the beds, etc. It is impossible to list everything in one article possible options When arranging a garden shower, each owner can make changes depending on preferences, skills, characteristics of the site’s topography and financial capabilities.

To make it easier for inexperienced builders to choose the best option for a garden shower, we present a table of the most commonly used designs with brief description their characteristics.

Name of structural element	Technical description
Frame	Can be made from wooden blocks or rolled metal. The dimensions of the bars are approximately 50x50 mm; slats measuring at least 20x30 mm are used to make side stops. It is better to make a metal frame from square or rectangular profile size of at least 20×20 mm.
External surface cladding	All lining options are suitable, including natural ones. Widely used profiled metal sheets, cellular or monolithic polycarbonate. The cheapest options are plastic film or thick fabric.
Water drainage	Some options may have special septic tanks, and most do not require storage tanks. Several tens of liters of water are quite successfully absorbed into the soil, especially if its composition is sandy or sandy loam.
Water tanks	Both metal and plastic containers. The best option is to buy shower containers in specialized stores. The minimum container volume is 100 liters, external surfaces must be painted black.
Water heating	Sunlight or combined with the use of electric heating elements. It is recommended to make a specific choice taking into account climate zone accommodation and shower time.

Garden shower

The construction of a shower consists of several stages; compliance with them allows you to avoid many troubles.

Stages of constructing a garden shower

The conditions listed below for placing a garden shower will increase the comfort of its use, reduce the amount of construction work and increase the time of use. These conditions are considered universal and must be taken into account when constructing any construction option.

Location. The shower should be located in a well-lit area garden plot, very desirable on a hill. If the land is sandy or sandy loam, then this arrangement will allow you to do without a septic tank or dirty water storage tank.
The distance between the shower and the residential building should be minimal. It can be adjacent to outbuildings, a garage, etc. The main thing is that after water procedures there is a place for shelter, which will eliminate the possibility of hypothermia in unfavorable weather.
Methods for filling a container under water. In all cases, the distance from water sources to the shower stall should be small.

After the issues with the location of the structure have been resolved, you should decide on the size and type of structure, and materials of manufacture. As we mentioned above, the choice is huge and depends only on the owner of the site.

Instead of building a frame, you can place the shower head on one of the walls of existing buildings, having previously taken special measures to protect it from moisture. There are options for placing a shower rail in an open space (vertical support, tree branch, etc.).

An original solution - the water tank is installed on the ground, and the supply is ensured using a special device, the so-called “treadmill”. It looks like a rubber mat with built-in water supply pumps. You need to press on them one by one with your feet, water is sucked out of the container and supplied under pressure to the shower head. At the same time physical exercise, and shower. Great option, can be installed anywhere summer cottage plot. To set up such a garden shower you do not need any construction skills, materials or time.

In this article we will dwell in detail on two more complex, but also more comfortable options. To build these structures you need building material and a little time and experience. The frame materials are wood or profiled steel. Standard sizes structures 100x100 cm around the perimeter and 220 cm in height. You shouldn't reduce it, it will be inconvenient to wash. If you want to do it in your heart separate place for changing clothes and storing bath accessories, you can increase the perimeter of the structure.

Step-by-step instructions for building a shower with a wooden frame

Step 1. Make the markings concrete slab grounds. To simplify water drainage, it is recommended to leave a recess in the middle of the shower for natural moisture absorption. The fertile layer should first be removed from the ground, a sand cushion 10–15 cm thick should be poured, compacted and leveled.

Step 2. Prepare the formwork. You need to make two square boxes. One with a square side of approximately 100×100 cm, the second inner one with a square side of approximately 60×60 cm. The height of the formwork is at least 10 cm; for manufacturing, use boards approximately 20 mm thick and 10–15 cm high. If you are afraid that the boards will bend under load concrete, then reinforce the formwork around the perimeter with wooden or metal pegs. Check the corners with a square; the formwork can be assembled using ordinary nails.

Step 3. Place the formwork on the prepared site and check its position. The small box should be located exactly in the center of the large one.

Step 4. Prepare the concrete for pouring. For manufacturing you will need cement, sand and gravel in a ratio of 1:2:3. Accuracy of proportions of great importance does not have, the strength is quite enough for small loads. Fill the formwork with concrete and use a level lath to level the top surface horizontally. Allow approximately 10 days for the solution to set.

Step 5. Dismantle the formwork and begin making the frame. It will require bars measuring 50x50 mm or more; the amount of material can be easily calculated. It is necessary to add the length of four vertical posts to the sum of the two perimeters.

Step 6. Make a base for the vertical posts. You can connect the bars in half a tree; a jumper should be made in the middle of the base; it will serve as an additional support for the wooden shower grate. Make sure that all corners are right; you can connect the bars with nails or self-tapping screws. The base bars (frames) should lie approximately in the middle of the concrete slab; the specific dimensions do not matter.

Important. Be sure to soak the base several times with an effective antiseptic. There is no need to install waterproofing between the frame and the concrete; it will only cause harm. The fact is that water gets on top of the insulation and cannot be absorbed into the concrete. As a result, wooden structures long time come into contact with water.

Step 7 Saw off the vertical posts to size, you need 4 of them. It is better to cut by hand electric saw, if it is not there, then you can use an ordinary hacksaw.

Step 8 Begin installing the vertical posts. For fixation, it is better to use galvanized metal corners. They greatly simplify and facilitate the work and guarantee proper stability of the structure. It is impossible to install vertical racks yourself; hire an assistant. Temporarily secure the racks with any pieces of boards; later they will be replaced with real stops. Constantly check the verticality of the racks, use a level.

Step 9. Make a second square from the bars, the dimensions are identical to the first, a water tank will be installed on it. If the container has a large volume, then you will have to install several additional jumpers; the distance between them depends on the size of the container.

Step 10 Using corners, secure the top square to the vertical posts. Check all frame elements with a level and correct errors if necessary. You can place wooden wedges at the joints; this will not affect the strength and stability of the structure.

Step 11 One by one, remove the temporary spacers and install the permanent ones. Use the same bars as for making the frame. The length of the spacers should be equal to the distance between the vertical posts; saw the ends at an angle of 90°. For fixation, use the same galvanized metal corners. Spacers are the most critical component of the frame; take all measures to ensure maximum strength.

Step 12 The frame is ready - start covering the side surfaces. Any material can be used for cladding. You can make doors to enter or use a retractable curtain. If the cladding is solid, then windows should be provided under the ceiling. Leave ordinary holes; you can cover them with glass or film. It is recommended to seal the sheathing cuts at the outer corners with even edged boards.

Step 13 Place a container of water on the roof of the frame.

Practical advice. If you plan to take a shower in rainy weather, then you should cover the roof with a piece of metal profile and make a hole under the outlet of the shower head.

Step 14 Paint wood surfaces with durable exterior paint.

You can install electric heating elements in the tank to heat water, but you must certainly follow the rules of the Electrical Regulations.

Step-by-step instructions for building a shower with a metal frame

To make the frame you will need a metal profile pipe, a grinder, welding machine, roulette and level.

After manufacturing, it is recommended to protect metal surfaces from corrosion processes with paint for exterior use. The amount of metal is determined based on the dimensions of the frame, as we described above. It is better to use a purchased water container; the length and width of the structure are adjusted according to its size.

Step 1. Draw a sketch of the frame indicating the length of each element. Take your time, carefully consider ways to strengthen the vertical posts. To strengthen loaded units, you can use pieces of rolled sheet metal with a thickness of at least 1 mm. Prepare squares or triangles with a side of 10–15 cm from it. Make sure that the angle is right and the cuts are even.

Step 2. Cut the blanks with a grinder. It is necessary to cut in compliance with all safety regulations; the grinder is a very dangerous tool. If you have many identical parts, it is recommended that you first accurately measure and cut one, and then use it as a template. This increases the accuracy of the elements.

Important. Make sure that the cutting disc rotates in the desired direction. At correct installation sparks should fly towards the master, but some people find it inconvenient to work this way and change the direction of rotation. This is very dangerous; while biting, the grinder is thrown onto the worker, which can cause serious injuries. It is impossible to hold the tool with your hands; the ejection force is too great.

Step 3. Start welding the frame. In order for the weld to be strong, maintain the welding conditions. The electrode thickness and current indicators depend on the profile parameters. For the frame, it is enough that the pipes have a wall thickness of 1–2 mm; such rolled products have the required physical strength and will fully withstand the load of a water tank. For welding, we recommend using a Ø 2 mm electrode; make sure that the slag is evenly blown off the surface of the molten metal and the seam is continuous.

How to weld a structure correctly?

Prepare a level workspace; the dimensions should be such that the largest elements can fit freely.
Place the two parts to be welded on the workbench and check their position under the square. As we already mentioned, the angle should be right and the parts should lie in the same plane.
Tack the parts on one side, the length of the tack is no more than a centimeter, give the metal time to cool. During cooling, the unit will move to the side and the correct position will be disrupted.
Using a hammer, trim the corners and turn the pieces over to the wrong side. Check the dimensions and spatial position again.
Carefully weld the parts on the other side, now you can make a seam along the entire length.
Turn the assembly over again and make a full tack weld. At the same time weld metal pipes from all sides.
Remove slag from the surface of the weld and check the quality of the weld. If there are large shells, then re-suture.
Use a grinder to remove sharp metal stains.

Thus, you can independently prepare two side planes of the frame; all that remains is to connect them into single design. It is very difficult to do this alone; it is better to call an assistant. One will hold the elements, and the second will weld them. You need to constantly check the corners, don't rush. Practice shows that reworking an incorrectly welded frame always takes much more time than carefully checking the dimensions and spatial position during the preparation of structural elements.

It is better to make vertical posts and a platform for the tank from a rectangular or square pipe; with the same dimensions as a round one, they have significantly better characteristics of physical strength in bending and compression. As jumpers, in addition to sheets at the corners, you can use any wire rod, square or reinforcement. There are pieces of profile pipe of sufficient length left - use them.

Step 4. At the bottom, weld a platform for the sheathing boards. The dimensions do not matter, it is intended only for support. The grille can be made non-demountable or assembled from individual elements. For manufacturing, take smooth lumber; the thickness of the boards or slats should support the weight of the washable ones. If you have thin materials, then make several jumpers for them.

Step 5. Install the frame over the shower location. This can be a concrete platform or ordinary temporary stone stops. The second option is preferable for several reasons. Firstly, there is no need to deal with earthen and concrete works. Secondly, at any time, if necessary, the shower can be moved to another place.

Metal frame - old lattice, wound with wire

If you weld legs with support platforms made of sheet steel at the bottom of the vertical posts. The dimensions of the platforms are approximately 20x20 cm, this is enough to guarantee the stability of the structure. Such a platform makes the shower more mobile when moving; for installation you only need to slightly level the ground under the supporting platforms; this work takes a few minutes.

Practical advice. Many people are concerned about water drainage. If your booth is located near the entrance of the house, and everywhere on the plot sidewalk paths, then it is recommended to make a dirty water storage tank. If the shower is located at the back of the buildings, then you don’t have to waste time and effort on building outlets. For hygiene procedures, 10–15 liters of water is enough for one person, this is not a large number of It will be absorbed into the ground on its own without any problems. For complete peace of mind, you can dig a hole under the shower for 2-3 car tires, water will accumulate in it. After moving the frame, the tires are removed and the hole is filled with earth.

Step 6. Align the cabin, make sure that the racks are strictly vertical and the platform for the container is horizontal.

Step 7 Clean the surface metal structure from rust, oil stains and dirt, check the stability of the frame with your hands. Everything is normal - you can start painting. Choose the color of the paint as desired, the main thing is that it is suitable for painting metal surfaces and for outdoor use. Don’t be too lazy to do the painting very well, use brushes, carefully rub the paint into the frame. If one layer is not enough for uniform coverage, you will have to repeat.

Metal frame coated with primer

Step 8 Place a container under water on the top platform and attach a shower head. If desired, you can do additional outlet for collecting warm water for various household purposes.

Water supply through a tee with taps on taps

If there are no doors in the cabin, and only a plastic curtain is hung, then the wind can blow it inside the cabin. This creates some inconvenience when taking a shower. There are several ways to correct the situation:

Attach to the curtain in several places of attachment. Two approximately in the middle of the height is enough.
Hang any “hangings” next to the plastic curtain. Main criterion choice – weight. The heavier they are, the better they will hold the curtain.

If you want to increase the comfort of taking a shower, then it is better to attach a door. For its manufacture, you can use both lumber and rolled metal. The design of the doors is elementary; they are hung on vertical side supports.

When making the frame, think about this point; little material and time will be required, but the convenience of using the shower will increase significantly. The compartment also needs to be equipped with wooden gratings for the feet.

Silicone mat to prevent feet from slipping on wet boards

If children will use the shower, be sure to install a shower head with a flexible hose for them. Place the water supply switch tap at such a height that children can reach it without any problems.

Video - Garden shower options

This will require skills in plumbing installation and tiling. But even a novice builder can handle a simple shower on a ready-made pallet. The main thing is to correctly assess your capabilities.

Of course, it is much easier to plan a future shower room in a house under construction. In this case, imagination is almost unlimited:

construction of a shower room with a sloping floor;
device for a tray “recessed” into the floor;
installation of a monolithic pallet with a side;
installation of a finished pallet;
connection of a modern shower cabin.

So, to organize a sloping floor, even at the construction stage, its level must be made lower than the floors in the remaining rooms by at least 10-15 cm. The same applies to a shower with a tray, the edges of which are located at floor level - so that you do not have to make a threshold into the bathroom.

If you need to re-equip the shower room in finished house, and there is no way to dismantle the floors, you will have to limit yourself to only the last three “floor” options. Their advantage is undoubtedly - such a shower can be made with your own hands, even without professional skills.

Features of piping in the shower

The second method is much more complicated - first the water enters the collector, and from it separate pipes go to each object - sink, shower, toilet and other appliances. This solves the problem of pressure drop when several water intake points are turned on simultaneously.

Without special skills, it will not be possible to make a collector system correctly, so in houses built with your own hands, they use a series connection. To prevent boiling water from pouring out of the shower when filling the washing machine, it is enough to use pipes different diameters– 3/4” for the common pipe and 1/2” for connecting devices.

Another important point– organization of drainage from the shower. When choosing a siphon, you need to decide in advance:

When choosing a place for a shower, the distance of the sewer connection is important - if it is more than 3 m, you will have to do deaeration to remove the air coming with the water.

Waterproofing and ventilation of the shower - what to pay attention to

Organizing a shower even in wooden house– not a problem thanks to modern materials and solutions. So, you can level and protect the walls with moisture-resistant plasterboard with mandatory gluing and puttying of the joints. The sheets should not reach 0.5-1 cm from the floor. If the walls are concrete or brick, you can immediately begin finishing them.

The waterproofing is applied to the screed and should cover the entire floor, extending onto the walls at least 15 cm. The walls in contact with the shower are also covered with waterproofing.

It can be either mastic or built-up roofing felt. Special attention should be paid to the outlets of pipes and electrical appliances. At the junction of the walls and floor, as well as at the corners, an additional sealing tape is glued, the edges of which are also rubbed with mastic.

But proper organization of waterproofing in the shower is only half the battle. Constant high humidity, even if it has no effect on the facing material, can ruin the most modern bathroom. That's why forced ventilation should be provided for at the planning stage.

The direction of air in the ventilation shaft, if it affects and living rooms, should be from “dry” rooms to “wet” ones - the bathroom and kitchen. Otherwise, constant dampness in the bedroom will be ensured. At the same time, it is advisable to do the hood even if there is a window - in the cold season it is hardly rational to constantly ventilate the shower room.

Shower with a ready-made tray - a simple and aesthetic solution

Installing the tray is extremely simple - just follow the instructions. Steel and acrylic pallets, in most cases, are equipped with special legs. But even in this case, it is better to place the pallet on a monolithic base with a support in the center - so that it does not sag or move.

The installation process includes five steps:

To simplify installation, instead of installing glass screens, you can attach a curtain bracket. To add originality to your shower, you can use non-standard brackets - oval, semicircular or even spiral.

How to make a shower without a tray

A shower without a tray looks very stylish. Such a shower in the house is convenient for children and the elderly, as well as for bathing pets. The absence of a curb is compensated by the correct slope for draining water, so you don’t have to worry about complete flooding of the bathroom.

The process of organizing such a shower is also quite simple, although it takes a lot of time:

To avoid screeding the entire floor twice, you can make a shower with a border. To do this, bricks are laid along the desired contour, and the whole process is repeated, but only in the space limited by the curb.

How to make a shower with such a tray with your own hands is very clearly shown in the video:

Country house For many, it is a favorite place where you can relax from the bustle of the city. But here, far from civilization, people are not used to giving up the benefits that this civilization provides. And one of them is the opportunity to splash around on a hot afternoon under a cool shower. That's why Summer shower refers to utility structures necessary for a comfortable pastime in a suburban area. It is even more relevant if there is no natural body of water nearby. To feel like a person even in the country, you need to build a solid structure that can last for more than one season. Have you already thought about how to build Summer shower? The photos will clearly demonstrate the main stages of the process.

We build a summer shower for a summer house with our own hands

Start bringing your vision to life with careful design. As they say, measure seven times, but cut only once. To get started, look through ready-made summer shower designs and make your own based on them. The space allocated for the shower, the availability of building materials and the desired dimensions are taken into account. Here you need to take into account the volume of the owners themselves.

Even a beginner can easily create a shower project on his own. Simple drawing or small drawing will help you calculate the amount of building materials, avoid some mistakes and unnecessary costs.

Summer shower should be spacious and comfortable. It is necessary to provide space for clothes and bath accessories - at least 40-60 cm. The height of the shower should be about 2.50 m. Dimensions interior space, which are most common - 160x100 mm and 190x140 mm. All this must be taken into account when drawing up a drawing or project.

Tips for site preparation...

Now you need to decide on the location of the summer shower. Naturally, it is better to build it in a well-lit, sunny place, away from other buildings. Then the water in the tank will be heated from the sun's heat throughout the day. But if you plan to build a heated summer shower, then it is not necessary to adhere to this condition.

The distance from home should also not be too great so that you can quickly go indoors after water procedures. It would be wise to take care of water drainage in advance. It is better to dispose of it in a septic tank or settling tank. It is worth paying attention to the convenience of water supply and, if possible, ensuring automatic filling of the container. After selecting a location, it is necessary to prepare the site: remove upper layer, level the base for the shower and fill the area with sand.

We are building the frame...

An outdoor shower can be a permanent structure, or it can be a light frame structure. Therefore, the main stages of constructing such showers differ.

The foundation is a reliable basis for a shower stall, but sometimes it is completely unnecessary

In order for the base for the shower to be correct and for convenience, you need to make basic markings: for this, pegs are driven into the outer corners of the site. After this, be sure to check the diagonal and tighten the cord.

The dimensions of the foundation depend on the materials that will be used in the construction of the shower. For a building made of brick or cinder block, pour a foundation 30 cm deep. If metal or wooden frame for a summer shower, the foundation will be slightly different. Before pouring, you need to prepare a place for the pipes - lay a log or branch of the required diameter, wrapped in roofing felt.

If you use an outdoor shower family has been planning for more than one year, it is better to make formwork - raise the level of the foundation above the ground by 10-15 cm, increasing the height of the trench using boards reinforced with pegs and spacers.

When pouring concrete for a shower base, it is extremely important to ensure a level surface. This is done in the same way as when screeding a floor, using a level and two guides. The guides are leveled, poured with concrete, and the base floor is leveled along the guides. Only a horizontal surface can serve as a reliable basis for further construction. After the leveling is completed, they begin laying bricks.

Installing a shower using a frame

You can use a metal frame as a base for the shower (it is more durable). Construction of a summer shower will be much more economical if you use wood. But this material is not durable. Taking into account the peculiarities of our climate and high humidity Due to the use of the structure, it is better to treat it with bio-impregnation to protect it from insects and fungus.

Having decided on the amount of building materials and the dimensions of the building, we proceed to the installation of the frame. The first stage is marking. A rectangle is marked on the ground, the sides of which will correspond to the parameters future design. In order for the design of the summer shower to be stable, it is necessary to make pile foundation. Therefore, holes of the required depth are drilled at the corners of the markings (130-170 cm, the depth depends on the length of the pipes). Then the pipe foundation is installed directly. For this, it is better to use metal pipes 1.5–2 m long (diameter 9-10 cm), but even railway sleepers can be used. The piles are deepened into the ground so that they protrude 20 cm beyond the ground. The pipes are then filled with concrete. After it hardens, wooden beams should be installed in the pipes. The width of the timber used for the frame should be no more than 10 cm.

This is how we will cover the frame with PVC film and get an excellent construction

The next installation step is bandaging: starting from the top, the entire structure is bolted together. If the calculation is made correctly and all dimensions are observed correctly, the design will be reliable. This will make it possible to install a large water tank. Its volume should be calculated according to the formula: 40 l × 1 person and no more than 200 l. The structure simply cannot withstand a heavy container. It is desirable that the tank be flat and correspond to the area of the roof, that is, rest against the supporting structures.

The bandage inside the frame will later serve as shower floor joists. Now we connect the beams-bases of the walls with each other using bevels. They should be installed in the thickness of the wall, but not in the overlay.

And here is a version covered with plastic slate

Slate sheets, OSB boards, boards, plastic panels and even PVC film.

Summarizing communications...

You can build a summer shower with your own hands from building materials, remaining on the site after the construction of the dacha, but with the provision of communications the situation is somewhat different. This is not possible without financial investments.

Laying pipes, installing a tank. After the structure is erected, it is installed water pipe. The outlet for the shower head hose must be made above head level. Otherwise the pressure will be too low. Now you need to install the tank. You can install a purchased plastic tank. Although, in order to save money, they usually use a barrel or any other container. Before the tank rises to the top, you need to make a threaded outlet, and also install a tap with a nozzle. Now the tank or barrel should be securely fastened to the roof. As a rule, the water in a tub or tank is heated by the sun's rays. In order for the tank to heat up faster, it is pre-painted black. It is good to equip a greenhouse made of film around the tank: cover it with foil on the north side to reduce heat transfer.

A metal shower tank will never go out of style, but now plastic options are increasingly being used

Lighting. When wiring for lighting, do not forget about the electrical installation rules. After all, the humidity in the shower is increased. Of course, you can do without electric lighting if you use the shower only when summer time. A stream of light coming from a small window (above head level) with frosted glass will be sufficient. In spring, the days are somewhat shorter, so there will not be enough daylight alone.
Ventilation. To improve air circulation and protect against condensation, it is advisable to make a hole in the ceiling and cover it with a decorative grille.
Shower drain. How to build an outdoor shower, install pipes, install lighting - we figured it out. Now let's deal with the drain problem. With an increase in the average daily temperature, the workload of summer residents increases significantly and the load on the shower increases. But the temperature of the soil does not affect its drainage properties. It’s good if it is possible to combine the shower drain and waste pipe at home.

For quick disposal and good outflow Wastewater, the summer shower must be installed on a hill. The walls of the pit should be further strengthened to prevent collapse. Please note that the volume of the drainage pit must certainly be at least 2 cubic meters. meters.

A common mistake made by novice builders is placing the septic tank next to the wall of the shower stall or under the shower itself. If the volumes of water are large, the septic tank may overflow. Over time, drainage works worse, and bad smell. With constant flooding, it is possible not only for the soil to shrink, but even to destroy the foundation, which is extremely dangerous. Therefore, the drain of a summer shower must be diverted several meters from the structure.

The water drainage is equipped with a waterproof layer using PVC film, roofing felt or hydroglass insulation. As an option, they make a concrete screed reinforced with a metal mesh.

Clay cannot be used as a waterproof layer. After some time, it will wash away and may contaminate the drainage ditch.

Installing the pallet

A tray will allow you to equip a summer shower with your own hands and ensure the drainage of wastewater for it. This can be a purchased pallet, a stainless steel sheet pallet, or the most cheap option – wooden pallet. Instead of a pallet, boards are laid, but not tightly, but leaving gaps for water. The lattice of boards is first sanded well with sandpaper and treated with an antiseptic. For convenience, you can put a rubber mat on top.

The simplest shower tray is made from ordinary boards

Waterproofing must be laid between the floor of the summer shower and the tray. For this purpose, roofing material is used. When installing the pan, you must ensure that the slope is formed towards the drain for unimpeded water flow. The pallet is screwed to the walls with self-tapping screws.

For more comfortable washing, so as not to have to stand on a metal tray, it is advisable to install plastic grilles.

Facing the structure...

An outdoor shower should fit harmoniously into the overall design of your yard. Any designer will say that for external upholstery It is better to use materials that complement the ensemble of nearby buildings.

The cladding of a summer shower is not only decorative; it is necessary to protect the walls from the effects of weather conditions. The surface of the walls can be plastered and painted or sheathed vinyl siding, it all depends on the owner’s imagination, his financial capabilities and the features of the structure. For example, a summer shower made of polycarbonate on a frame does not need cladding at all.

On the left is the polycarbonate version; on the right is a shower lined with wood

A good option is to cover the walls and ceiling with clapboard. If the family will visit the dacha only in the warm season, then it is better to choose PVC film, thick colored (opaque) polyethylene or tarpaulin as a material for lining the summer shower. If the shower casing is removable, it can be easily stored in the pantry for the winter.

How to make a summer shower comfortable...

It is very convenient when the building is divided into two zones: a shower and a changing room. To prevent water from entering the locker room area, the floor of this area should be raised a few centimeters. A small decorative curtain made of polyethylene will also help protect clothes from splashes.

If you need to use the shower during colder periods, the walls will have to be insulated. For this purpose, polystyrene foam is used. This material must be used to fill the internal space of the frame. Next, the structure is covered with PVC film using a stapler and decorative slats. Already on top of the film, interior finishing is done.

If you are choosing materials to decorate an outdoor shower (there are plenty of photos on the Internet and in catalogues), try to pay attention not only to aesthetics, but also to practicality. Only moisture-resistant materials are suitable for finishing the inside of the shower stall.

A modern summer shower in the form of an extension to the house - why not an option?

For interior decoration, you can use thin linoleum, plastic panels, oilcloth or wood. If you choose wood, don’t forget to cover each board separately with hot drying oil, and only then begin finishing work. When facing interior walls the material is run under the sides of the pallet.

To improve soil drainage, you can plant several moisture-loving plants near the shower. Green spaces absorb water. They will not only decorate, but also protect the space around the shower stall from waterlogging.

Thus, a do-it-yourself summer shower will become an indispensable outbuilding on a personal plot.

Preparing for summer season is already in full swing. Some people use summer cottages to grow crops, others prefer to sow them with lawn grass, plant ornamental plants and simply spend time in nature. Be that as it may, on hot summer days you can cool down and take a cool shower everyone wants it. It is not always possible to hire construction team for the construction of a shower on the site, and such costs will not always be justified. So that you can competently and easily cope with the construction process, in this article we will look at 8 tips for arrangement of a summer shower at the dacha with your own hands.

1. Where to start?

If you have thought about building a summer shower at your dacha, then you already have a rough idea of what it will look like and what you need to purchase. In addition to the design itself, it is very important parameters are:

Choosing a location;
Shower size;
Water tank volume;
The nature of the construction is temporary or permanent.

Many people try to choose the most secluded corner behind the house or in the shade of trees in order to hide such an intimate structure from prying eyes. This is precisely the main thing mistake! By building a shower among the trees, you will be subject to constant attacks from insects that love moisture and coolness, and will deprive yourself of the possibility of natural heating of the water in the tank. That's why place For the future structure, it must be located in an open, well-lit area and in no case be in a hole or in a low area. Even if you plan to use a heated tank, it is more rational to refuse in order to save money on hot days. The building itself should not be located at a short distance from. When taking a shower late in the evening, you need to get home as quickly as possible so as not to get sick.

Concerning size future the buildings and the volume of the water tank. The recommended height of future walls is 200-300 cm. It is necessary to build on the height of the tallest family member, who should not rest his head on the shower head. Width And length shower space is calculated depending on whether the building will have a dry changing room or be limited to only a wet area. The option with a changing room is, of course, more convenient; your clothes will be protected from getting wet, and you will have the opportunity to change clothes in comfort. This way, your shower will consist of two sections separated by a partition. An area of 220x120 cm is quite enough for these two zones, even taking into account the cladding.

Choosing a tank for water, it is necessary to consider the number of people who will use the shower and the intensity of its use. If you come to your dacha only on weekends and use the shower after a hard day at work, then a container that will hold the amount of water at the rate of 40 liters per person is quite sufficient. This will allow each user to continuously pour water for approximately 10 minutes. If many more people take water procedures in a row, you should think about a larger tank. But keep in mind that temporary buildings will not support containers with a volume of more than 200 liters. As the tank itself, you can use iron or plastic barrels, or purchase ready-made country models with a built-in watering can. A little advice– if you paint the surface of the tank with black paint, the water in it will heat up much faster due to the ability of black color to attract heat.

So, let's highlight basic moments:

Location: in an open, elevated, bright area, at a maximum distance of 2-4 meters from the main building;
Room size - the height is selected taking into account the height of the tallest family member, the minimum comfortable perimeter is 100x100 cm;
The size of the water tank capacity is 40 liters for each user, multiplied by the number of people who will consistently take water procedures.

Character future the buildings– temporary or capital, must be selected based on the following parameters:

2. We equip the foundation and ensure the outflow of water

The basis of any structure, of course, is reliable. In the case of a summer shower, the foundation should not only protect the structure from being washed away by groundwater and subsequent subsidence, but also be able to quickly drain used water into large quantities. Building any foundation begins with markings. It is necessary to draw an outline in the selected location. For example, the size of the shower will be 120x120 cm - a person of any size will be comfortable in such a space. You need to drive pegs into the corners of the rectangle, pull the cord around the perimeter and check the dimensions using a tape measure.
This marking is universal and is performed before the construction of any type of shower. Now let's consider types of foundations for various buildings.

Foundation for a simple temporary shower

For temporary construction, it is enough to remove the top layer of soil 15-20 cm deep within the outlined rectangle and level the area. Now you need to make a pillow that will help drain the water. To do this, prepare a mixture of crushed stone and. You can simply fill the hole halfway with sand and add a layer of crushed stone on top. Small stones will allow soap scum to settle on their surface. Additional filtration a sand layer will avoid rapid mulling. This design can also be placed near the garden without harm to the plants. On top of such a base are usually laid, which serve as the floor in the summer shower. To prevent rapid rotting of wooden materials that will often come into contact with water, it is recommended to place pallets or boards knocked together at a height of 15-20 cm above ground level. For formwork you can use old bricks or . They are laid out around the perimeter of the base, leveled and compacted using a mallet.
You can use wood to decorate walls or floors only after making it moisture-resistant. The most effective way is impregnation with hot oil and subsequent opening with drying oil or. Arranging such a foundation will allow you to use a summer shower for more than one season.

Foundation for capital construction

If the shower will be used frequently and not by one or two people, you need to think about erecting a permanent building. The most expensive method would be a brick structure. But it is easiest to heat it in the cool season. To do this, it is enough to insulate the walls. The best option would be frame building made of metal or wooden beams. Special attention need to pay attention to arrangement reliable basis. In this case, it is necessary to fill foundation from concrete.

According to the markings, you need to dig a hole about 30-35 cm deep. You need to make mortgages around the perimeter of the rectangle. For these purposes, you can use old iron pipes. The larger their diameter, the stronger the structure will be. In the places where the pipes are located, using a drill, a hole up to 30 cm deep is made, into which pipes or wooden beams are driven. If you use wood, you need to protect its surface by wrapping it in roofing felt or treating it with hot bitumen. After this it is filled in cement-sand mixture. Wooden mortgages can be made not only in the corners, but also along the entire perimeter of the base. To do this, use logs of sufficient width, which can ensure further installation of the floor. The base must be level. This will help prevent water from accumulating in sloped areas. Filling is carried out using arrangement technology. Use special construction beacons and rules.
Disadvantage foundation, which is made by pouring, is that we begin to arrange internal space you can only after it has completely dried. For brick buildings you can use solid cast reinforced concrete slab 170-300 mm thick as a base. This will significantly reduce construction time.

Arrangement of water drainage

Any capital building needs high-quality water outflow.

Best suited for collecting waste septic tank, which must be placed next to the shower stall, but in no case under it. If you decide to save space on your site and still place it under the shower, after a short period of time you will begin to feel a sharp, unpleasant odor inside the building. In addition, there is a risk of soil collapse around the septic tank and, as a result, destruction of the foundation. The recommended distance from the shower stall is 1-2 meters. From shower tray a drain pipe is removed or a drain ditch is laid into a septic tank, which must have a sump and drainage tank. A pit is dug for the receiving chamber. It must be sealed. It could be a tin barrel or. It is recommended to cover the container with a lid to prevent rain or groundwater from filling it. Nearby is a leaky drainage tank. It should be installed on a bed of sand and gravel. These two compartments are connected to each other by pipes.
Another option for collecting waste water is cesspool. To equip it, you need to dig up about 2m3 of earth. This is the optimal volume that will ensure long-term use. A drainage cushion of sand and gravel is made at the bottom of the pit, and the walls must be strengthened and made waterproof. You can line them with bricks, use ready-made concrete rings, or you can reinforce the pit with old ones. Arranging drain hole, do not forget that it needs to be pumped out. In this regard, it must be located in a place where unhindered access for special equipment will be ensured. In addition, the pit must have a distance from the residential building of at least 3-4 meters, as characteristic odors may form.
For simpler types of shower that will not be used with great intensity, it is enough to equip drainage well. It will be located directly under the shower stall. A hole is dug, 2 meters deep, a layer of crushed stone is poured at the bottom, and then a plastic pipe with perforation is inserted. Such a well is filled with material that will act as a filter. It can be gravel, crushed stone, old broken bricks, slag. The well is filled to the very top, then covered with a layer and covered with soil. A wooden pallet is already installed on top of the formwork, which has slots for water infiltration. This is the most affordable, but no less effective method that will ensure the necessary outflow of water.

The simplest way to ensure a water supply is to install a plastic tank or an old iron barrel on the roof of the shower, paint it black to increase the rate at which the water is heated by the sun's rays, and connect a hose to it, through which water will flow into the tank. A water supply hose is required, especially if the tank volume is 100 liters or more. Disadvantage tanks with natural heating is that in the cool season their use is problematic. Therefore, many people prefer tanks With heated There are three types of such systems:

Installation selected tank can be done in two ways - placing the tank directly on the roof of the cabin or on a special frame. The second case is rational to use if the volume of the tank is impressive, and the building may not support its weight. It is enough to make a frame from old iron pipes over the shower roof or from wooden beams. This method of placement will help to avoid significant heat loss and speed up the water heating time.

4. The simplest ways to organize a summer shower

It happens that a summer cottage is visited very rarely, and then not for work, but more for relaxation. In this case, the shower can be a simple design that you can even bring with you.

Portable shower. This design looks like a large heating pad and is made of the same material. After filling the container with water, it is twisted with a special nozzle, at the end of which there is a. There is a loop at the opposite end, which is convenient for hanging the container on a tree or hook. By placing the container in a well-lit place, the water will heat up very quickly. The volume of such a “shower” is 10-15 liters. This entails restrictions regarding the duration of water procedures and the number of people who can use it. But it is very convenient and inexpensive option for one person.
Shower stand– is an iron pipe on legs, which is equipped with a shower head and a hole for connecting a hose. This rack is convenient because it can be placed in any convenient place and, if necessary, brought into the utility room for storage. Disadvantage its lack of a water tank. That is, if there is no warm water on the site and normal pressure in the system, you will have to take a cold shower.
Usage shower system. The shower column is a metal rod to which the overhead shower and mixer are attached. In order not to bother with arranging a special room for its placement, many attach the shower system directly to the wall of the house or outbuilding. To do this, water is drained from the wall. The wall of the building is protected from moisture. You can veneer it, or with other materials that are available. For convenience, you can separate the space with a curtain and place a wooden tray or rubber mat on the floor.

Let us remind you that this is an option for rare use. For the time when you are not at the dacha, the system can be removed and the output can be closed with a special plug.

All of the above types of showers are good because they do not require a foundation or drainage. But also the disadvantage is obvious– the possibility of their use depends entirely on weather conditions.

5. Do-it-yourself summer shower made of wood

To erect a wooden building you you will need:

Related timber;
Fastening elements;
Rubber hose;
Shower head or shower set;
Crushed stone.

Construction begins with the construction of a pit for water drainage. It is necessary to remove the top layer of soil 30-40 cm deep and fill it with crushed stone. This way, the soil under the shower stall will quickly absorb water, and the soap residue will remain on the rubble. Now you need to do formwork, to protect the wood from rotting. In the corners of the pit, bricks are laid in a level. The height of the formwork must be at least 15 cm.

Now let's move on to construction frame. You should start from the foundation. It requires boards 15 cm wide and at least 3 cm thick. The size of the base must correspond to the size of the pit. To fasten boards together, it is better to use threaded connections. Over time, the joints will not weaken even under significant weight, unlike conventional ones, which can “slip” out of the mounting hole. 4 beams with a cross section of 7×10 cm are attached to the base.

Frame dressing performed using side and two transverse jumpers, which are inserted into the grooves. The same jumpers will strengthen the frame from above, which will ensure stability after attaching a heavy water tank to the roof. At your discretion, you can add a few more jumpers if you think that the design is unreliable.
For wall cladding You can use thinner wooden planks, lining, false beams, blockhouse and other timber. The main thing is to leave small gaps between the parts, 3-4 mm thick. This is necessary so that the planks can freely expand when wet, without deforming each other, and also shrink freely after drying. Remember that everything wooden parts that will be exposed to constant exposure to water must be carefully primed and varnished. You can soak them in drying oil or hot oil. Especially important before painting. There is a special antifungal antiseptic impregnation. You can start painting after the primer has completely dried.

When the shower is completely ready, you can hang up the tank. You can simply lay it on the cross beams and secure it with straps. If the tank is homemade, do not forget to cut a hole in the bottom for the watering can and a hole for the hose in the top. For convenience, several shelves for shampoos, soaps, etc. can be provided inside the cabin. and a couple of hooks for towels and clothes. Such a shower can be built in a weekend, and if necessary materials already existed on the site, then the costs will be minimal. Life time The design of a wooden shower depends entirely on how well you treated the wood and protected it from moisture before construction. Therefore, this point deserves special attention.

6. Shower cabin made of polycarbonate

Polycarbonate is usually used to create. Therefore, many people associate this material with the greenhouse effect, and, consequently, with inconvenience. This opinion is wrong. To create showers there is a special opaque type of polycarbonate. The most durable building will be one that is made of metal profiles. Working with them is no more difficult than with wooden beams. Profile pipe with a cross section of 40×20 mm and a wall thickness of 2 mm, suitable for constructing a frame. Also to you required steel corner 50×50 mm. The number of profiles is determined depending on the area of the future shower. The only thing worth considering when cutting is that the racks should be 10-15 cm larger than the expected height of the shower. This is necessary so that you can concrete them and not lose height. Work plan will look like this:

The frame assembly must be performed on a flat surface. Two side drains and two overlapping crossbars are laid on the ground. their straightness is checked. The parts are connected to each other using welding. The second wall is assembled in the same way.
After welding, finished structures must be installed vertically at the required distance from each other and connected to each other by two transverse profiles. Maintain a 90 degree angle between the walls. The crossbars only need to be fastened on one side; the door will be welded on the other.
After the frame is assembled, a hole of the required size is dug. The top layer of soil 10-15 cm deep is removed, leveled and a concrete screed is poured. Once the screed has been poured and leveled, it must be installed on top assembled frame in such a way that the racks, which were initially longer, plunge into. The level checks verticality installed structure and adjusted if necessary. If the length of the legs exceeds the height concrete screed, you need to drive them into the ground until they are completely immersed.
To collect water, you can install a special steel pan or provide drainage ditches during concreting.
For this design, it is better to use flat-shaped plastic water tanks. They are easy to install and, moreover, they eliminate the need for arranging a roof.
Separately, you need to weld the door frame and weld the hinges to the frame. It is more convenient to immediately sheathe the door separately from the walls.
When covering the walls, attach the polycarbonate directly to the profiles using self-tapping screws.

The color range of polycarbonate, which is used for lining shower enclosures, is very diverse. Therefore, the design can turn out to be very attractive. Caring for this material is very easy, and in the evening it will protect you from the cool wind.

7. Country shower made of corrugated sheets

Another good material for covering a summer shower is corrugated sheeting. This material has a high strength And durability combined with ease. It is windproof. And when its walls warm up throughout the day, it will be comfortable to shower in. Both wooden beams and metal profiles can be used as a frame. Metal is, of course, more durable. Therefore, if you still need to purchase materials, give preference to it.

Making the frame is similar to the examples from points 5 and 6. The only thing difference– more crossbars need to be added. This is necessary for reliable fixation of the sheets and imparting rigidity to the structure, since the corrugated sheet itself is considered soft material. Attach the sheets using . Be sure to use spacers to avoid damaging the sheet. You can cut corrugated sheets with metal scissors or using a grinder and a disc with teeth. It is not advisable to use other circles. May burn during cutting polymer coating, which protects the coating from corrosion. The roof is also covered with corrugated sheeting, and the tank is located under it. The gap between the walls and the tank will provide natural ventilation in the cabin and will prevent the formation of unpleasant odors. An unheated tank can be placed on top of the frame. Then there is no need to build a roof.

8. Brick shower

This is the most labor-intensive design that is found in summer cottages with year-round living. Benefits This kind of soul has a lot:

With the proper approach to the construction process, such a shower will last for many years;
If you use a heated tank, you can take water procedures at any time of the year. Windproof walls also contribute to this;
It is very easy to insulate such a building by covering the outside with foam plastic;
A brick shower can consist of two zones - wet and dry, where it is much more convenient to change clothes;
A brick shower can be combined with a toilet and use one drainage hole;
Strong walls and a concrete foundation will allow the use of very large water tanks without the risk of structural collapse.

Disadvantages include high costs associated with the purchase of materials and the duration of work.

Construction must begin with the arrangement foundation. In the selected area, markings are made and a trench is dug around the perimeter with a depth of 20 cm and a width of 40 cm. Now you need to fill the trench with crushed stone or broken bricks and fill it with a liquid concrete solution so that it seeps through the stones. After the mortar has dried and settled, about a week later, you can begin laying the first layer of bricks. When making masonry, be sure to control verticality after each new row. Don't forget to leave room for the door. When laying the last layer of bricks, make foundations from thick wooden beams. The tank will be attached to them and the roof will be laid. It is also necessary to strengthen the doorway metal corner or the same beam. The roof is covered with corrugated sheeting. It is also necessary to provide a small window that will provide lighting and ventilation.

Now we need to arrange drain It is best to install a drainage well under the shower and lay a drain pipe from it into a sewer pit. Then a large number of people can easily use such a shower. The drainage well is filled with earth and filled with concrete; the drain pipe is first brought out. To facilitate drainage, you can fill it with a slight slope towards the middle. In this case, the upper edge of the pipe should be flush with the floor. A wooden pallet with holes is placed on the concrete floor.

Optimal tank size is at least 200 liters. When placing it on the roof, provide an opening for inlet pipe, onto which the shower head will be screwed. It can be either purchased or homemade. When using a heated tank, do not forget about the electrical supply. If you are not strong in this matter, then for your own safety, seek advice or help from specialists. Door leaf can be made of wood or OSB or chipboard covered with galvanized sheet. This way you will ensure yourself comfortable conditions for taking water procedures at any time of the year.

Many people prefer to spend the summer at their dacha. And this is not surprising, because this is where you can hide from the bustle of the city and the unbearable heat. But to make your stay in a country house as comfortable as possible, you need to think about building such a structure as country shower. To implement this idea, first of all, you will need imagination, because the building must be not only practical, but also beautiful. In addition, you need to decide on the materials from which the construction of the shower will be ordered, because this is one of the main components of the “issue price”.

Some shower stalls don't even have to be built - they are delivered from the store ready-made

Pros and cons of a summer shower

Today, summer showers of various designs are used to furnish summer cottages and houses. Each of them has its own advantages and disadvantages. This is worth considering when choosing a design. Popular options include:

Film shower. The structure consists of metal and wooden elements that are covered with film. The disadvantage of such a shower is its fragility. As for the advantages, we can highlight ease of installation and mobility. If desired, it can be easily moved from one place to another. Metal corners are often used for construction.
Frame construction. The shower is a stable and monolithic product that has a long service life. The design is well ventilated, and the water heats up quickly. It is easy to serve and comes off just as quickly. As for the disadvantages, it is worth highlighting the vulnerability from negative factors environment. During operation, the structure loses its attractive appearance.

One of the most durable solutions is a polycarbonate summer shower

So, having analyzed all this, we can note several main advantages of a summer shower:

efficiency;
ease of installation;
practicality.

As for the disadvantages, among them we can highlight the limitation of use. The fact is that in such structures, water heating is most often carried out from solar energy. Therefore, they cannot be used in the cold season or in bad weather.

Types of summer shower

For the manufacture of modern shower use various materials and technology. When choosing, you should rely on financial capabilities and other equally important factors.

Wooden shower

A wooden cabin is a popular and common option. This is due to the fact that it is very simple to implement. Used environmentally for construction pure material, which has many advantages. The only drawback is low resistance to moisture and insects. That's why wooden elements are treated with antiseptics. Timber and boards are used for construction. Wood would be the best option coniferous species, as it is highly resistant to humid environments.

Often offered combined options– shower plus toilet

A wooden shower in the country is performed in the following sequence:

The shower is frame structure, which consists of racks of a certain cross-section. When choosing timber, it is worth considering the load that will be created by the storage tank.
Holes are dug under the posts, the depth of which is 80 cm. A cushion of crushed stone and sand, 10 cm thick, is made at the bottom.
To protect the timber from rotting in the ground, it is coated with bitumen and wrapped with roofing felt. After this, they are installed in the hole and leveled. Additional racks are installed in the places where the doors are mounted.
The racks are connected at the bottom and top by horizontal bars. Bolts or angles are used to fasten them together.
The sides of the cabin are finished with sanded boards. After this, all elements, including doors, are treated with paints and varnishes.

During construction, it is worth considering a method for draining waste water. As for its supply, storage tanks are installed on the roof, which have different shapes and volumes.

You can order the construction of a full-fledged open-air bathroom

Polycarbonate construction

This design is somewhat simpler to construct. To perform the work you will need a welding machine. This is necessary for the construction of a metal frame. A profile with a cross-section of 40x60mm is used as racks. Smaller products are used for strapping.

Installation of the frame is carried out in the same way. The racks are concreted in pits. Jumpers are attached between them, which will add rigidity to the structure and will also be used to fasten the polycarbonate. A durable frame is welded on top on which the water tank will be installed. After this, the entire structure is covered with waterproof paint.

For finishing, opaque polycarbonate sheets are used, the thickness of which ranges from 6 to 10 mm. A circular saw is used to cut the material.

The polycarbonate shower warms up like a greenhouse

Corrugated shower

As a summer shower, you can also use a structure made of corrugated sheets. This material is lightweight and distinguished by its durability. To construct the frame, wooden blocks and metallic profile a certain section.

The construction of the shower follows a similar pattern. The racks are connected by a transverse profile, which will give rigidity to the structure. To fix the finishing material, galvanized self-tapping screws equipped with sealing washers are used. The doors are made of a profile frame, which is sheathed with corrugated board. To cut the material, use metal scissors or a grinder with a toothed disc.

Neat booths made of corrugated sheets

On our website you can find contacts of construction companies that offer metal structure installation services. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

Brick shower

To build a shower stall from brick, you need to make a shallow foundation. To do this, dig a trench 20 cm wide and 40 cm deep around the perimeter. To save on the construction of the foundation, in concrete mortar throw broken brick or stone.

When the concrete has hardened, laying is done with cement mortar. At the same time, a doorway of the required dimensions is arranged. The door can be made of wood or a metal frame covered with corrugated board. Bars are laid on top of the masonry, which will serve as the basis for the roof and the installation of a water tank.

Brick is a permanent building

Choosing a location on the site and installing a base for a summer shower

When building a summer shower at the dacha, special attention is paid to the choice of location. It is worth considering some factors:

The water should warm up well. Therefore, the structure is mounted in a sunny place. Trees and buildings will cast shadows on the cabin, which will negatively affect solar heating.
When choosing a place, you should consider your preferences. So, the structure can be placed near the house, in the garden or near the pool, if there is one on the site.
It is better to install the shower stall on a flat area, near which there is a place for water discharge. Otherwise, you will have to do complex wiring.
The structure should be located near the house.

To do right choice, you need to carefully inspect your area. It is also worth considering the features of constructing a shower. First of all, this concerns the need to build a foundation for the cabin.

It makes sense to install an outdoor shower only in an open, sunny place

The foundation for an outdoor shower is arranged when we are talking about a stationary structure that has significant weight. First of all, this applies to buildings made of bricks, blocks and other materials. A popular option is to install a slab foundation, which will also serve as the floor in the cabin. The construction process looks something like this:

The area is marked and cleared of thickets and debris.
A pit is being dug out. If we are talking about building a brick cabin, then a pit with a depth of 15 cm will be enough.
A sand cushion no more than 5 cm high is placed at the bottom. It is carefully compacted.
Concrete is poured. The surface must be carefully leveled, which will avoid the need for floor screed.

You can also use a columnar and strip foundation to build a summer shower. In the first case, using a drill, holes are made with a depth of 1 m, into which support pillars are subsequently installed. If hollow pipes are used for this, they are filled with concrete.

The foundation must provide openings for drainage and water supply

Concerning strip foundation, then here we are talking about a shallow structure. For the arrangement, you will need a trench 40 cm deep and 20 cm wide. When pouring, reinforcement is performed with several reinforcement rods. This will give the structure durability and strength.

Installation of a shower cabin

A shower cabin in a country house can be made locally or purchased in a store. Today the market offers a wide range of ready-made structures. When choosing them, it is worth considering the following factors:

Size. The shower stall should be easy to use for all family members. Therefore, it is worth relying on the largest user.
Material. The cabin should fit optimally into the landscape design. The material must also be highly resistant to negative impacts environment.
Storage tank size. On average, one person consumes 35 liters of water while taking a shower. Therefore, when choosing a tank, you should rely on the number of family members. The container should have a small reserve reserve.
Price. There are designs on the market in a wide price range. So, you can purchase a product for 5 thousand rubles or 15 thousand rubles.

Even the most economical option will be quite functional

The structure is installed on a level, prepared place. It's best to make a monolithic one concrete platform, which will give stability to the cabin during operation. During the construction of the cabin, a number of specific processes are performed:

arrangement of drainage;
construction of the foundation, if necessary;
the frame is erected and its finishing is carried out;
a tank is installed and connected to water.

The construction features directly depend on the material used in construction, as well as the preferences of the owner of the country house.

Video description

In the following video you can evaluate 30 design ideas for a summer shower:

Insulating a summer shower

Why insulate a simple summer shower if it is used in the warm season? The fact is that carrying out thermal insulation work will significantly extend the life of this structure. The main thing is to properly insulate the perimeter. For this use:

Mineral wool. This is an environmentally friendly material that is very easy to install. The mats are laid into the frame, after which it is sheathed from the inside. To prevent moisture from entering the material, it is covered with an impermeable film.

Glass wool. If desired, it can be used to insulate the shower at the dacha. Of course, you need to be careful when working with it and carefully follow the installation instructions.
Waterproof foam. Is modern material, which is optimal for insulating an outdoor shower. To do this, it is enough to use slabs 5 cm thick. They are laid in a frame, on top of which the interior walls are finished.

The insulation of the structure allows it to be used even in bad weather. Of course, it is worth understanding that thermal insulation is only relevant in the case of closed shower stalls.

Installing a shower tank, water supply and heating

You should approach the choice of tank very carefully. It is worth considering some recommendations from professionals:

Metal containers heat up faster in the sun. Plastic containers are distinguished by their durability due to their resistance to corrosive processes. They are also lightweight, which will reduce the load on the frame.
The water container should be painted in dark color, which will speed up heating. This is achieved through better heat absorption.

Most often the shower tank is dark in color

The tank must have a sealed design to prevent dust and dirt from entering the water.
Before installation, holes are made in the tank for the tap and water supply.

Today in the store you can find ready-made designs that include a watering can, pipe, tap and fittings. A sensor for monitoring the water level and its temperature would also be useful. The container is installed and secured to the prepared frame.

To supply water to the shower, water pipes are used:

A trench is dug at the site where the pipeline is laid. Its depth should be greater than the freezing level of the soil. This will protect the system from frost.
The pipeline is being assembled. Particular attention is paid to the pipe joints. They must be sealed and reliable. A water tap is installed at the end of the pipeline, with the help of which water will be supplied to the pipeline.
The pipeline is insulated mineral wool and is placed in the trench. If it is necessary to supply electricity, the electric cable is buried in the same trench with the pipe. This will make your work easier.

At the final stage, the pipeline is connected to the water source and to the storage tank. In the latter case, polyethylene pipes or a garden hose can be used.

Water tanks can be installed separately - in this case, you can increase the volume of heated water

If necessary, the garden shower can have independent water heating. A common option is to install heating elements. Heating is also carried out using a boiler or gas boiler low power. When installing these heating elements safety requirements must be taken into account.

Also used for heating solar panels. This is a glass box with a coil installed inside. With its help, a greenhouse effect is created, which leads to heating of water.

Video description

And a few more options for arranging a summer shower in the following video:

Organization of water drainage in a summer shower

There are several ways to arrange a drain in a summer shower. Thus, water can be discharged into a filtration well or into a filtration field. In the latter option, channels are installed between the beds. This will allow you to irrigate the area at the same time without any special costs.

Diversions are carried out in open and closed ways. In the first option, ditches are made at a slight slope from the collection site. This option is often used on moisture-resistant soils. The closed method involves laying pipes in the ground.

You need to decide where the used water will flow, given that it will be soapy

Conclusion

A summer shower at the dacha is inexpensive, but in any case useful design, which is quite simple and short to install. Even if you haven’t quite decided on the material and design, you can always additionally consult with a manager at a store or construction company, who will suggest incomprehensible nuances and help you make the right choice.