How to hide pipes from prying eyes with a drywall box. How to independently sheathe pipes with drywall Masking furniture and a screen

Many apartment owners, upon completion of the installation of pipes or heating systems in the house, are wondering how to close them with an outer box and what kind of sheathing to use for this. Everyone has their own preferences in this matter, however, the material that is most often used for this purpose is drywall.

Advantages of drywall boxes

In general, the construction of the outer box can serve various purposes, for example:

Give designs an aesthetic appearance.
Provide protection against accidental mechanical and other damage.
Achieve a soundproofing effect (especially in the case of sewer pipes).

Gypsum boards meet all these requirements well, and although other materials can be used to build the box, they are preferable for a number of reasons:

Low price.
Ease of assembly design.
Excellent environmental performance.
High sound absorption rates.

It is not difficult to work with this material, and therefore the involvement of professionals is optional, and with some skills, you can close the pipes with drywall with your own hands.

Preparation for sheathing pipes with plasterboard boxes

Before sheathing the pipes with drywall, some preliminary work should be done, which are as follows:

Preparation of the necessary materials, including metal profiles (rails, rack), screws, dowels and drywall sheets themselves.
Preparation of the necessary tools (knife, screwdriver, hacksaw, plumb line, level, pencil).
In the case of metal pipe products, it is advisable to clean their surfaces of old paint and repaint before sewing up the pipes with drywall. After sheathing the pipes with drywall, access to them becomes very difficult or impossible.

Upon completion of these works, before you close the pipes in the room or in the bathroom with drywall, you must first prepare a reliable frame for its fastening.

Do-it-yourself frame installation

The material for the construction of the frame structure, to which the plasterboard sheathing will be attached, is usually metal profiles (rack and guides) made of galvanized sheet.

These products are resistant to the process of corrosion and rust, and therefore their use ensures a long service life and the absence of serious problems during operation.

Work on the manufacture of a frame structure consists of the following stages:

Marking lines and contours of the frame on the floor, walls and ceilings, carried out with a simple pencil using a level and plumb line.
Installation of guide profiles in accordance with the marks and their fastening to the wall with dowels.
Installing three vertical rack profiles and measuring the distance between them.
Inserting rack profiles into the rails and fastening them to each other with small special screws called “bugs”.

After these works are completed, the frame for the planned sheathing can be considered ready, and it is possible to proceed with the construction of the box itself from drywall sheets.

Plasterboard box installation

Sheets of drywall are prepared for the assembly of the skin, after which they are cut into fragments of the desired size.
The blanks are inserted between the profiles and placed for subsequent fixation.
Plasterboard blanks are fastened to the frame using self-tapping screws. The screw heads should not penetrate the drywall by more than 1 mm. Screwing plasterboard sheets with screws to the frame is done on both sides.
The ends and edges of the used sheets protruding beyond the structure are sawn off with a hacksaw. Edges in places of cuts are leveled by means of a diamond grid No. 100.

Processing and finishing plasterboard sheathing

If we are talking about how to sew up heating pipes with drywall, or you need to surround the heating system as a whole with a box, then it becomes important to have holes in the casing for heat to escape into the room. It is desirable that such heat holes have a diameter of five centimeters or more, but they can be replaced by a large number of holes of small size.

During the summer, the heat vents are not used, and in order to prevent dust and other particles from clogging them, it is recommended that they be closed until the next winter. A handy option are commercially available hinged lids that can be left open in cold weather and closed in the spring/summer season.

If it is necessary to box ordinary household pipes in the kitchen or in the toilet, or the question is how to sew up the pipes in the bathroom with drywall, then the presence of such holes is not required.

In addition, lining and additional arrangement of a drywall box provides for several types of work:

Sealing of attachment points, slots and seams. As a rule, ordinary polyurethane foam is used for this purpose.
Strengthening the outer and inner corners of the box with steel corner profiles, which not only helps to align the corners, but also provides additional protection against accidental mechanical damage.
Inserting the exhaust flange into the top of the mounted duct.
Puttying work followed by grinding with a grout mesh or sandpaper.
Decorative finishing of the erected cladding structure. There are plenty of options here to choose from. For example, wallpaper can be pasted over the box, painted in the desired color with paint or emulsion, covering the sheathing with self-adhesive furniture tape, using liquid wallpaper, decorative plaster, etc. Which option or style to choose depends on the imagination, taste and preferences of the owners of the home .

As you can see, lining pipes with drywall does not present any particular difficulties, and does not require high professionalism or sophisticated equipment. This is due to the popularity of drywall boxes for enclosing pipe and other structures. Their manufacture is within the power of any self-taught home master who will carefully read the instructions and observe accuracy and thoroughness in work.

Photo 1 - Hiding pipes in the bathroom

Sewer and water pipes, being in plain sight, can ruin even the most original design, so you need to hide them.

Rules to be observed when hiding pipes

To make the bathroom look stylish and at the same time all systems work properly and for a long time, you need to follow a few rules:

Use pipes with a minimum number of connections, which is ensured by competent wiring and proper placement of equipment;
Use connections that use the same material as the pipes. At the same time, the margin of safety should also be identical, or better, it would be higher.
In order to have quick and convenient access to taps, valves and other items of equipment during revision or urgent repairs, special hatches should be provided.

Photo 2 - Plastic pipes in the bathroom

Insulating materials should be used to prevent condensation on the pipes. If the pipes are planned to be hidden in the wall, such insulation will also allow them to expand freely, which is especially true for pipes with hot water.

Photo 3 - Insulating material for pipes

Several ways to hide pipes

If there is a need to hide communications in the bathroom, then there are several proven methods.

Masking pipes with furniture

Hiding all communications behind hanging or built-in furniture is the easiest, fastest, and at first glance inexpensive option. For example, if the pipes are mostly vertical, then you can buy a regular pencil case of the right size. It remains only to remove the back wall and make the necessary cutouts on the panels at the top and bottom. The result is a cabinet in which you can put a lot of different things, among which there will be pipes.

Photo 4 - Masking pipes behind the nightstand

However, this method has a significant drawback. In the place where the pipes pass, there is always high humidity, and it is difficult to find furniture that can withstand such a load for a long time. You can additionally treat all surfaces with a moisture-proof material, but this will take a lot of time and is not cheap.

Installation of pipes in the wall

This method is convenient if the house is just being built or redevelopment is being done. To hide the pipes in the wall, you will have to ditch, however, if the walls are panel, then such work in the horizontal direction is prohibited. Quite often, the walls are not thick enough to perform such work.

Photo 5 - Installation of pipes in the wall

It should be remembered that metal pipes, as well as any communications with threaded connections, cannot be used for wall mounting. It is important to properly route the pipes, and be sure to take into account the thickness of the tiles if facing is to be carried out. Next, you need to lay the insulation. It remains only to carry out plastering work, close the pipes and you can veneer.

Photo 6 - Pipes in the wall in the bathroom

This option allows you to make the bathroom a little more spacious, and it looks more attractive. But, if a leak occurs, it will be very difficult to get to the pipes.

Photo 7 - Pipes in the wall in the bathroom

How to use boxes and niches to mask pipes

The construction of the box can be considered one of the ways to redevelop the bathroom, quite simple and convenient. A metal profile of the desired shape, or several wooden bars of the required length and section, is sheathed with sheets of drywall, which needs further finishing. It is easier and faster to build a box using plastic panels.

Photo 8 - Box for pipes in the bathroom

Niches for masking pipes are built in a similar way, but they allow you to hide not only plumbing lines, but also a washing machine, washbasin, etc.

Boxes and niches have a serious drawback - they take up space, which is very important in a small room.

Closing pipes with a special screen

Currently, the choice of screens in stores is quite wide. It is a frame with two guides, to which plastic or drywall panels are attached.

Photo 9 - Screen under the bath photo

The cost of the screen is low, while it looks very original and attractive. In addition, it is easy to remove, which makes access to communications quite easy. The disadvantage is the same as that of boxes and niches - it takes a few centimeters of usable area.

Features of masking pipes with a plasterboard wall. Instructions for use

This option is easy to install, as well as low cost. It is better to install a drywall wall in rooms that have not yet been inhabited, where the owner determines the location of the partition. This option for masking pipes is also suitable for large bathrooms.

Before starting the construction of the wall, if steel pipes are used, they must be prepared: cleaned of old paint and applied a new coating.

At the first stage, you should prepare all the necessary materials and tools.

Now you can start building the frame:

Pipe routing must be carried out at the stage of frame construction. In this case, it is necessary to take into account the thickness of the wall of drywall and tiles, if the finishing work will be carried out with its help.

Now you can proceed to the sheathing of the frame with plasterboard:

Photo 13 - Finishing the box with tiles

Installation of a drywall pipe box video

When choosing a way to hide pipes, you need to be guided by the size and style of the bathroom, as well as personal preferences and financial capabilities. You can use any of the above options, while no one limits you in creating your own method, which will be more interesting and practical.

A photo

Photo 14 - Box for pipes in the bathroom

Photo 15 - Box for pipes in the bathroom

Photo 16 - Box for pipes in the bathroom

postroiv.ru

How to hide a pipe in a bath

High-quality modern renovation involves not only the use of reliable materials and elements, but also getting a beautiful room, so different parts of communication systems are hidden in the bathroom. To understand how to hide pipes in a bathroom, you need to know that it is quite simple, and various methods and materials can be used for this. Before starting work, it is necessary to evaluate the advantages and disadvantages of each option, as well as to study which communication elements are not allowed to be hidden in the wall, as they may require full access.

Ways to hide pipes in the bathroom

Disguising pipelines is allowed by various methods, and this will allow you to get a room that has an attractive appearance. If high-quality and expensive materials are used during the finishing process, but pipes are visible, then the room will not look too beautiful. Also, condensate often accumulates on open sections of the pipeline, so they darken over time, which does not add to the attractiveness of the bathroom.

An interesting and well-implemented disguise provides a neat, stylish and modern room. The main thing is to get acquainted with how you can hide the pipes in the bathroom with your own hands.

Hiding in the wall

This method is considered the most common, but it is only suitable for pipelines made of polypropylene or copper, since in them all connections are soldered and welded reliably and efficiently, and there is also no thread. How to close the pipes in the bathroom with this method? For this, the following steps are performed:

a scheme is created for laying the pipeline in the wall;
markings are applied to the walls, along which strobes will be created further;
chasing is carried out, after which recesses are obtained for pipes with the required depth and width;
pipes are placed in a special corrugation;
then they fit into the strobes obtained earlier;
the strobes are closed with concrete mortar, after which the walls are covered with plaster and putty, and then any decorative coating is allowed to be laid.

wall chasing

Pipe laying

From above, the pipes are closed with concrete mortar

Before turning on the water supply, you must wait until the concrete mortar used to close the strobe is completely dry, since if you turn on hot water, the screed will crack. Closing pipes in this way is quite difficult and expensive, and it also takes a lot of time to devote to this process. It is usually used for new apartments where major renovations are being carried out from scratch. It is also effective in redevelopment of the apartment. Before you hide the pipe in the bathroom, you should determine the locations of various adapters and taps, and viewing windows are certainly created for them.

Horizontal chasing is not allowed in panel walls.

If the pipelines are hidden in the wall, then to create them, it is necessary to purchase exclusively high-quality materials, since in a poor-quality system there is a high probability of breakthroughs, which leads to flooding of the neighbors and the need to dismantle the decorative coating and re-chase the walls.

The positive aspects of using this method include an attractive appearance of the entire room. Any finishing materials are chosen for the walls, and the size of the room will not be reduced, which is especially true for a small bathroom.

Bathroom podium

To hide communications, a podium is considered an excellent choice, which effectively disguises the unattractive space under the bathroom. A bathtub is considered a popular plumbing fixture found in almost every bathroom. It can be mounted on legs, but often a podium is organized for this. It acts as the base for the device.

Usually the ugliest and largest elements of the water supply and sewerage system pass under the bathroom, so this space is effectively closed with the help of a podium. For this, chipboard treated with special water-repellent compounds, or plastic panels can be used. Usually a small door is created, with the help of which access to the space under the bathroom is provided. In this case, various cleaning products are stored here. Most often, plastic is used for this, but before that you need to familiarize yourself with how to hide pipes in bathrooms with plastic panels.

Drywall box

Often, communication elements are closed with drywall. This material has many advantages, as it is notable for its low cost, ease of processing and cutting, and its moisture-resistant variety is also produced, which is perfect for the bathroom. Removing pipes with this method is easy and fast, and you don’t have to spend a lot of money on it.

Drywall hides not only pipes, but also other elements of communications.

How to close the pipes in the bathroom with this method? For this, the following steps are performed:

a drawing of future work is created, on which its result will be schematically visible;
calculations are made that determine the required amount of materials;
materials are purchased, which include metal profiles to create a frame, moisture-resistant drywall itself, fasteners for fixing profiles, as well as a sealant used at joints;
fastening of metal profiles begins, with the help of which a high-quality frame of the desired size is obtained, and it is desirable to do the work in such a way that the distance from the frame elements to the pipes is minimal;
the frame is sheathed with drywall, for which the material is easily cut with a sharp knife, after which it is inserted into the free space between the profiles;
joints are filled with sealant;
the box is finished with any materials suitable for the bathroom.

Frame around the sewer pipe

Frame around pipes on the floor

The frame must have places for passing pipes

The space around the pipe should be filled with mineral wool

Sheathing the frame with drywall

Thus, if you carefully figure out how to make a box correctly, you get a beautiful decoration of the room. Drywall is easy to work with and is an environmentally friendly material. The disadvantage of using a box is a decrease in the area of the room, which is especially important for a bathroom that is usually small in size.

To gain access to taps or other important sections of the pipeline, special technological holes are made in the box, on which doors are mounted. In the event of a malfunction in the performance of the system, you will have to completely dismantle the structure.

Masking furniture and screen

Often when looking at ways to hide pipes in bathrooms, the choice falls on furniture or a screen. Often a special furniture design is created, which is a cabinet equipped with shelves. With its help, not only unattractive areas of communications are hidden, but also free space is provided for storing various items. A room with such a design looks interesting and unusual.

With the help of a pencil case, you can hide vertical pipes

Cabinet with countertop will help hide the pipes

How to hide vertical pipes in the bathroom? For this, a special pencil case is suitable. The back wall is removed in it, and recesses for pipes are cut out in the shelves with the help of a grinder. However, for these purposes, special moisture-resistant furniture is selected, as it must cope with the constant exposure to high temperature and humidity. Such interior items are presented on the market in limited quantities, and also usually have a high cost. It is allowed to use standard items to create a furniture structure, but they will regularly have to be treated with special protective equipment, which entails a constant waste of time, effort and money.

Most often, laminated chipboard is used to create such furniture, which has high resistance to high humidity. Doors are selected hinged or sliding to ensure ease of use of the structure indoors. All cracks are necessarily treated with high-quality silicone to ensure high tightness.

How to hide the pipes in the bathroom under the tiles using a screen? This method is used quite often, and it involves closing the space under the bathroom with special panels or drywall sheets. The most frequently asked question is how to hide the sewer pipes in the bathroom with plastic panels. To do this, a frame is formed under the bathroom, sheathed with panels. Even during the production process, they are equipped with special grooves and spikes, so their connection is a simple and quick job. The disadvantages of this method include a decrease in the usable area of \u200b\u200bthe room, which is often critical for a small room.

Bath screen

roller shutters

Often, roller shutters are used to decorate pipes. They have an attractive appearance and are also considered easy to use. For many residential property owners, the main advantage of using roller shutters is the constant and easy access to communications and the main elements of networks.

Roller shutters are created for the bathroom from various materials, and are considered the ideal solution if the pipes are located in niches, since the installation process is greatly simplified. The disadvantages include the fact that usually inexpensive products are formed from soft materials, so if handled carelessly, they can be easily damaged, so they lose their attractive appearance.

What not to hide and possible mistakes

Before you close the sewer pipes in the bathroom, you should make sure that they can really be closed, since some elements of the communication networks must always be open to constantly provide access to them. It is not allowed to hide without access:

any threaded connections, as they are considered to break often, so there is a high probability of leakage;
threaded fittings that are assembled on metal-plastic using keys.

It is easiest to hide elements without any connections, since the likelihood of leakage in such places is minimal. If it is nevertheless necessary to hide areas with connections, then it is important to choose such structures where it is possible to make inspection hatches that give access to difficult areas, cranes or other important elements of the system.

The main problems that arise during work include:

along with hidden pipes, various taps or other important communication elements are hidden, the need for which may arise already during the operation of the system;
areas where there are threaded connections are hidden, so if leaks occur, it is impossible to quickly access them for repair, so you have to partially destroy the finish in the room;
there are no inspection hatches in important parts of the systems.

If you know about the main problems that arise during the work process, then you can make high-quality decoration of unattractive pipes in the bathroom. It is easiest to work with brazed copper and welded joints, as they are easily closed with ties or other methods without creating access to them. It is also possible to close press fittings crimped with construction tongs without fear, however, the products themselves must be of high quality and reliable.

Thus, pipes, which are part of numerous communication networks, are most often hidden to increase the attractiveness of any bathroom. For this, various methods and technologies can be used, so the design that looks the most attractive and interesting is chosen. This takes into account that some sections of the pipeline are prohibited from being closed, and in certain sections it is required to create access to the system in case of a need for repair work. At the same time, not only an attractive decoration of the room is guaranteed, but also the creation of a safe repair, therefore, in the event of a leak or other problems, it will not be necessary to violate the integrity of the finish.

Video

www.vannayasovety.ru

How to hide pipes in the bathroom

The presence of open pipes in the bathroom can disrupt the overall design concept of the room. To correct the current situation, it is necessary to make high-quality masking of the elements of communication systems.

The communication system is an integral part of the bathroom. At the same time, the presence of open pipes can spoil the overall appearance of the room, as a result of which there is a need to resolve this issue. You should first take care of how to hide the pipes in the bathroom. It is also necessary to consider further maintenance of the system. The presence of a small door or the installation of a collapsible structure can significantly facilitate access to the communication element. Before you hide the pipes in the bathroom, you should think very carefully about this point.

How to hide the pipes in the bathroom with drywall?

Drywall is a very affordable material that can be used for a variety of building purposes. Excellent performance characteristics allow the use of drywall when resolving the issue of how to close the pipes in the bathroom. At the same time, attention should be focused on the need to use a variation of the material with a high moisture-resistant potential. In order to close the pipes in this way, you may need:

moisture resistant drywall;
screws;
mounting strips;
dowel;
screwdriver;
paint knife.

Before you close the pipes in the bathroom with drywall, you should first take care of preparing the frame. The base will consist of a guide and rack profile. It is best to use a metal variation of the frame, which is made using galvanized sheet. Here we can talk about maximum resistance to negative corrosive effects.

At the initial stage, the future location of the main frame elements is marked. A guide profile is installed along the drawn contour. To mount the rack profile, small screws are used - bugs. At the final stage, the prepared frame is sheathed with drywall. For fixing sheet material, ordinary screws are used. They are screwed in such a way that the surface of the cap sinks no more than 1 mm.

Before you hide the pipes in the bathroom with drywall, you can take care of installing a shock-absorbing tape at the points of contact between the profile and the work surface. The presence of this element will help increase the stability of the entire structure, since the tape absorbs the resulting vibrations and does not transmit them to the frame.

Vlad Zhitin, expert

Thermal holes

Provided that the drywall box is mounted to mask hot water pipes or heating elements, then care must be taken to prepare the heat holes. Their presence allows thermal energy to freely enter the room.

To install the heat holes, you may need an electric drill with a special nozzle. Subsequently, special swivel covers can be installed that allow you to adjust the heat supply.

Finishing work

If we close the pipes in the bathroom with drywall, then one of the mandatory installation steps will be finishing work. When resolving this issue, it is necessary to close up the places of fastenings and seams very high quality. Also at this stage, the strengthening of internal and external corners is carried out using a special metal profile. This will provide reliable protection of the structure from various mechanical damage.

Finishing work also includes the application of primer and putty layers. After the putty has dried, you can resort to grinding the surface using sandpaper. Subsequently, the finished box can be painted or wallpapered.

Do-it-yourself installation of pipes in the wall

Masking pipes in the thickness of the wall is a fairly popular way to resolve this issue. It is very important to know the communications wiring diagram and have a special tool at hand. In addition, care should be taken to purchase special fasteners.

Before you hide the pipes in the bathroom in this way, you need to make small strobes in the wall. Their size must correspond to the pipes. At the same time, the prepared ditches for the hot water supply system should be somewhat larger, since possible thermal expansion should be taken into account.

It should be remembered that wall chasing in a panel house is strictly prohibited. It is also recommended to refrain from a similar procedure if the thickness of the brick wall is minimal.

At the final stage, facing works are carried out. The main advantage of this method is that the bathroom is not reduced in size. However, in case of pipe damage, it becomes necessary to completely dismantle the facing layer to identify the place of failure. This is not to say that this method is extremely practical.

How to hide pipes in the bathroom under the tiles?

Covering pipes with tiles can take a long time. This is a rather laborious process. It should be noted that this material is ideal for the bathroom. This is due to its high resistance to high humidity.

Here you will also need to install the frame. A wooden frame or a metal base can be used as a base. In the latter case, we can talk about practicality, since there is no need for pre-treatment of the surface with special compounds.

Before you hide the pipes in the bathroom under the tiles, you should initially sheathe the frame with moisture-resistant sheet material. Subsequently, a mesh is glued to the surface, which will be the basis for future tile installation.

First, the front side of the structure is tiled. After that, the tile is laid on the end sections and the horizontal surface. At the end, the uppermost part of the structure is lined.

To make access to the elements of the system as simple as possible, you can install a special hatch. Such a door is slightly recessed into the wall, and pasted over with tiles on top. This will help ensure that the hatch will not stand out against the general background of the wall.

Masking pipes with furniture

Using furniture to mask pipes is a fairly effective and very affordable way. However, it is predominantly decorative. Installing hanging cabinets or cabinets provides the easiest access to the plumbing system if necessary. Before you close the pipes in the bathroom with a cabinet, you need to pay attention to the location of these elements.

Provided that the pipes are placed vertically, it is most advisable to resort to installing a pencil case. In this case, the back wall of this furniture attribute is removed, and holes are made in the upper and lower parts of the cabinet. Additionally, such an attribute can be used to store various things.

Given the high humidity in the bathroom, you must carefully approach the choice of a headset. In order to increase the overall service life in such conditions, the furniture attribute used must be pre-treated with special compounds.

Seal pipes with plastic panels

When using plastic panels, it also becomes necessary to install a box. Such a finishing material is suitable for use in wet conditions, as it has a number of advantages:

moisture resistance;
minimum weight indicators;
optimal thickness;
environmental friendliness;
ease of installation;
price availability.

Before you hide the pipes in the bathroom under the panels, you must first calculate the amount of material that will be needed for this. After that, markup is carried out to install the frame.

The fastening of individual elements of the frame is carried out using self-tapping screws. Profiles are attached to the wall with dowels. Initially, it is necessary to mount the frame base to the wall. Before you hide the pipes in the bathroom under the plastic panels, you should take care of the possibility of access to the individual elements of the plumbing system. To do this, you can make a collapsible box.

At the end of the installation, the skirting board is installed, which can be removed very easily during dismantling. After that, the screws are untwisted and the panels are very easily removed from the frame. Here we can talk about the practicality of the design.

How to hide pipes on the floor?

If you are faced with the task of hiding the pipes in the bathroom on the floor, then this issue can be resolved with a screed. It is the floor arrangement of communications that is the most optimal option.

Before you seal the pipes in the bathroom in this way, it is very important to determine the most appropriate thickness of the screed. The implemented layer should freely contain communications with a small gap. In order to ensure the mobility of the pipe during expansion, it is laid in a corrugation.

The laying process must be carried out with the heating turned off. Moreover, starting hot water is prohibited until the screed is completely dry. Otherwise, cracks may form on the floor surface. This method of masking is not practical, since in case of damage to the system, it is necessary to completely dismantle the implemented layer.

Alternative methods of disguise

In addition to the above methods of masking, there are several more simple and affordable methods. Each of them has its own characteristics. Alternative masking methods include:

stucco;
mosaic;
roller shutters;
metal gratings;
false walls.

Stucco. The use of such material does not require special skills. Stucco molding can be an excellent element of decor, which is characterized by maximum practicality. In case of damage to the pipe, the stucco molding is very easily removed and subsequently also returned to its place. The material is easy to process.

Mosaic. This solution can also be called exclusive. In order to disguise, it is enough to simply paste over the pipe to match the color of the tile. A feature of the mosaic can only be called that such material can be used exclusively for wide pipes.

Roller blinds. Plumbing shutters are a great option for masking pipes. They can be positioned as a decorative element. Roller blinds are very practical to use. They provide the easiest access to the damaged section of the highway. If necessary, roller shutters are equipped with a mechanical or manual drive.

Metal lattices. These elements are mounted on an installed frame or directly to the pipes. Their use allows you to bring variety to the overall design concept of the room.

False walls. The advantage of this solution is the possibility of simultaneous masking of several pipes at once. At the same time, the installation of so-called false walls is associated with a decrease in the total space in the room.

What is the result?

We looked at several options for how to close the pipes in the bathroom. With a sufficient abundance of ways to resolve this issue, it is quite possible to choose the most appropriate method. The final choice will depend on the characteristics of the bathroom and the characteristics of the pipes to be masked.

It is possible that you have your own ways to resolve this issue. If so, please share them in the comments.

Vlad Zhitin

Expertise - sewerage, water supply

How to hide pipes in the bathroom under tiles, how to close them with drywall, how to seal them with plastic panels: photo, video - printable version

protryby.ru

How to close the pipes in the bathroom with your own hands?

Many owners of modern apartments often have the question of how to hide the pipes in the bathroom with their own hands. After all, furniture and sanitary equipment create comfort in this room. There can be no question of beauty if at the same time beautiful tile is visible and plain rusty pipes against its background. How to hide pipes in the bathroom under the tiles? Let's consider several options for solving this issue.

How to hide pipes

In a renovated apartment, hiding the pipes in the bathroom and not littering it is impossible. How to hide pipes in the bathroom? It is better to do this work at the stage of repair. You can hide them in the wall. How to remove pipes in the wall? It will not be possible to do this with products with a diameter of 110 mm. Cutouts up to a depth of 50 mm can be made in the wall. But not everything can be hidden there. Piping systems are:

Welded ones are suitable for hiding in the wall. And the fittings may begin to ooze over time. In this case, the walls will get wet. Fungus and other harmful microorganisms will start in the strobes (grooves in the wall). Strobes must be sealed with cement mortar. You can remove the pipes into the wall and fix them with special fasteners. Grooves for them are made with a puncher and a circular saw.

How to close the pipes in the bathroom in another way? You can do this with a drywall or plastic box. This method can be an excellent solution in cases where you need to hide risers or sunbeds that have a large diameter. Even a large number of thin pipes can be hidden in a box. It is made of drywall or plastic.

The plastic box is easy to assemble and disassemble. It is suitable for sheathing old pipelines, the strength and quality of which are in doubt. Drywall is recommended to cover new pipes. This is due to the fact that tiles are usually glued onto drywall. To make a box you need:

profile UD - 4 pcs.;
profile CD - 1-2 pieces;
drywall or plastic panels;
dowels and screws;
drill;
a hammer;
screwdriver or screwdriver;
building level.

Guides are attached to the walls. Their position is regulated by the level. The finished frame is sheathed with plastic panels or drywall sheets. Installation of a plastic box is best done after the completion of the rest of the finishing work. A drywall box is made before they are carried out. The framework for them is the same. In drywall, you need to think over and build an inspection hatch for quick access to pipelines. Then the hidden and disguised pipeline can always be inspected and the casing not damaged.

Other ways to disguise

How else to hide pipes in bathrooms:

When developing any method, you need to consider the placement of all pipes, appliances, joints and turns. It is advisable to mark all this on the wall and on the floor. This will make it possible to spend less time on practical work, because some of the products will fall on the floor. You don't need to cut walls underneath.

Under the fill, you can place a heating circuit, water supply. If the pipes in the bathroom will be hidden in a box, you need to additionally insulate them with a layer of foam, mineral wool, and then close them with drywall or plastic panels. Drywall is better to use moisture resistant.

More ways to hide the pipe in the bathroom:

A good way is to close the pipes in the bathroom with cabinet furniture that you can make yourself. Shelves are closed with doors. There is also a storage facility for household chemicals.
It can be masked with foam stucco, colored mosaics, artificial flowers and lianas, just paint with paint in a color suitable for the interior. Roller blinds (roll-type metal shutters) are also used. They provide full access to the hidden and allow you to equip shelves for household chemicals. Installation is not difficult, any color is selected.

Disguise methods

You can mask the pipes in the bathroom:

stucco;
mosaic;
roller shutters;
metal gratings;
false walls.

Stucco is a material for which you do not need to have special skills. It is very practical in design, easy to remove and stick, easy to process.

Mosaic is an exclusive solution. You can simply paste over the product to match the color of the furnishings or tiles. But you can use the mosaic on rather large things and on pipes of large diameter.

Roller shutters or plumbing shutters are another option to hide pipes. At the same time, they are a decorative element. Roller shutters are very practical in operation, they allow easy access to any hidden section of the pipeline. They can be equipped with a drive - manual or mechanical. Roller blinds are durable and comfortable. Their disadvantages include their high cost.

Metal gratings are mounted on an installed frame. They bring variety to the design of the room. False walls are able to hide several plastic or steel products at the same time. But they take up part of the usable area of the bathroom. They are made of drywall and hide everything that is there.

Conclusion

We have already figured out how to hide your plumbing and other pipes in the bathroom. This can be done in different ways. The main thing is to leave an inspection channel for checking and repairing threaded connections, meters, valves and fittings. Valves must always be accessible.

It is desirable to wrap all products with a layer of waterproofing material. This is done so that they do not sweat. It is best to use polypropylene products for hidden communications. They will go under the filling of the floor. All connections are best boiled well. Before laying on the floor, the products should be placed in a corrugated hose. From above, everything laid is covered with a layer of cement or concrete pouring. The layer thickness is at least 2-3 cm above the pipes. Tiles, linoleum, laminated panels are laid on the screed.

How to attach a drywall profile to a wall

Major repairs in dwellings often involve replacing pipes. Upon completion of the installation of pipes or radiators, it becomes necessary to hide communications to create a favorable appearance of the walls in the bathroom, toilet or in any other room. A lot of work done during the renovation period with the use of expensive tiles, underfloor heating and attractive plumbing fixtures, and a lot of effort put into creating a pleasant interior, can be in vain if communication disguise is not thought through.

Various materials are used for such work, but the most acceptable is the use of drywall, from which the box is made. Why the choice falls on drywall?

The advantages of a drywall box for pipe sheathing are due to the following:

affordability of drywall;
ease of manufacture of plasterboard structures.
environmental safety of drywall, characterized by the absence of harmful substances in its composition. This is especially true in the manufacture of boxes for batteries and heating pipes that emit heat during space heating.

Some information about drywall. This popular building material is characterized by a multilayer structure with alternating gypsum and paper layers. Drywall sheets are on sale in the size of 2.5 by 1.2 meters. One sheet of drywall will be enough to make a box for a fan riser.

Note! For the construction of the box in rooms with high humidity, such as a bathroom and toilet, a moisture-resistant type of drywall should be used.

wood or metal

First of all, you need to assemble the frame. For the manufacture of the box, both a metal profile and a wooden bar can be used. The advantages of a metal profile made of galvanized steel is that, unlike a wooden beam, it has increased resistance to moisture and is not exposed to rust for a long time.

The advantages of a wooden frame include the environmental friendliness of wood and a higher degree of sound insulation.

Materials and tools

Before proceeding with the manufacture of the box, you should consider a set of tools and materials.

Materials and tools:

sheet drywall;
metal profile (guide and rack);
dowel-nails, self-tapping screws for fastening parts of the box;
special knife for cutting drywall.

You will need materials such as mounting foam, cushioning tape, putty to level the surface of the box. Of the tools, a drill, hammer, screwdriver, tape measure, level, plumb line, pencil are useful.

Preliminary work

The preparatory work includes the processing of steel heating pipes and radiators (heating radiators), from which the old paint is removed and, if necessary, a new one is applied. Paint as an insulating material will protect metal pipes from premature rust damage. These works must be completed before installing the box, which will subsequently block access to the pipes.

The above work will not be required if the manufactured box is used for sheathing plastic water pipes.

Note! It is possible to continue work on installing the box only after the final drying of the paint on pipes or batteries.

Frame assembly and cladding

A drywall box is fixed to a power metal frame with vertical and horizontal profile elements.

Note! When alternating horizontal elements, a step of 60 cm must be observed.

The finished frame is sheathed with sheets and strips of drywall, pre-cut to fit the dimensions of the frame. Drywall parts are fixed to the profiles with self-tapping screws. They are screwed into the drywall with a slight recess so that they can be hidden under a layer of plaster.

There are several ways to close the pipes with drywall:

1. Carry out the "preservation" of the pipeline of the fan riser: remove rust from pipes, replace damaged pipeline sections, prime or paint pipes, repair joints between pipe sections.

2. Start work on installing the cladding box should be from the bottom. This means that marking the dimensions of the box, taking into account its contours, should be applied by drawing straight lines using a corner, starting directly from the floor surface - to the left and right of the pipe. Sections of profiles of the required length are fixed horizontally with dowels along the lines drawn on the floor. Similarly, horizontal profiles are installed on the ceiling (or elsewhere on top of the future box). Vertical profiles are attached to the installed horizontal ones. Next, the remaining horizontal profile elements are added in increments of 60 cm.

Note! Vertical profile elements are attached to horizontal rails using special self-tapping bugs.

3. Cutting blanks from drywall is carried out after the final installation of the frame from the profiles. Drywall is cut with a special knife, often used for cutting wallpaper. On the front side of the drywall sheet, lines are drawn for the external dimensions of the individual sides of the box from the profiles. Furrows are applied along these lines with a knife - alternately for each workpiece. The notched drywall blank is simply broken and then cut from the back of the drywall sheet.

Note! Plasterboard blanks are fixed to the box frame using ordinary metal screws.

4. Arrangement of a window (vent) in a drywall box opposite the fitting (faucets and connecting devices on pipelines). The need for such a window is obvious - during operation, regular revision and repair of the sewer system is necessary.

Only after you learn how to close the pipes with drywall, and do all the work on installing the box, you can start finishing work. They may include applying plaster to the surface of the box and then painting it, or lining the box with ceramic tiles.

Video

An example of making a pipe box:

A photo

If before you did not have to deal with such a wonderful finishing material as gypsum plasterboard (gypsum plasterboard), then you can only rejoice, because you have a lot of discoveries ahead of you. Today, the option of how to close the pipes with drywall with your own hands will be considered in detail, but, strictly speaking, its capabilities are not limited to this.

Hiding pipes with drywall is the most popular way at present, easy, fast and not expensive.

GKL is used today almost everywhere, because the range of its application is very wide. Partitions inside the premises are being erected from drywall today, walls are leveled with it and ceilings are sewn up, with the help of these sheets they achieve amazing architectural forms that amaze the layman's imagination. And today this material practically reigns supreme in the market of materials for interior decoration. You can even say that thanks to him, an entire profession disappears - a plasterer. After all, the use of GKL is much faster, easier and more profitable from the point of view of the financial side of the issue.

Among other things, this material is so easy to work with that almost any consumer will be able to perform work related to coating any GKL surface. And this means that additional benefits will also be obtained due to the fact that you do not have to attract third-party specialists and pay them money.

materials

Before you close the pipes in the bathroom with drywall, let's figure out what this material is. As the name suggests, gypsum board is a sheet that is made up of gypsum filler and cardboard. Cardboard in this "sandwich" plays the role of a reinforcing and binding coating, and gypsum acts directly as the main filler, or compound.

All sheets are perfectly even and of the same thickness over the entire area. They are produced in thicknesses from six to twelve millimeters, each of these sizes is good for its own purposes. Light structures and ceilings are sheathed with thin sheets, interior ceilings are made with thick sheets, and in order to close the pipes, you need something in between, namely a sheet nine millimeters thick.

In addition, GKL is ordinary and waterproof. Needless to say, for finishing in wet rooms, the second option is needed, it can be distinguished by the green color of the cardboard.

It is also worth mentioning the sections of the GKL plates. They come in different shapes: rectangle, slope, rounded and combined shape. For work, this parameter is not so important, since usually the edge of the sheet is simply cut to plaster at an angle of forty-five degrees.

Getting Started

Before we can cover the pipes with drywall, the following work must be done:

Measuring work. They will require the appropriate tools, namely: a tape measure, a building level and a marker for marking.
Cutting and preparation of material. Here we need to build a drawing using the measurements obtained and calculate how many profiles and gypsum boards will be required to build a box around the pipes. The next step is to purchase materials.
In order to make a drywall box in the bathroom, you need to purchase the drywall sheets themselves, guide and supporting profiles, dowels with a wide edge for attaching the structure to the wall, drywall screws, self-tapping screws for fastening to walls and floors, profiles, putty and spatulas.
From the tools, first of all, take a drill, then a jigsaw, a paint knife, the already mentioned spatulas, a container for mixing putty and a sealant for laying it under the guides. Don't forget the cutter too.

Useful advice. Many do not know about such a tool as, but meanwhile this is a very useful thing when working with GKL. The die cutter connects structural elements from profiles to each other without disturbing the surface smoothness of the front side of the structure, which in turn guarantees a perfect fit of the sheets to the frame.

Before closing the pipes with drywall, it is necessary to seal them with insulation - this will reduce the noise characteristics of the structure.

There are certain subtleties that you need to know when doing the work of building this box. Let's look at all the stages of work:

First, it is necessary to prepare the surfaces and the communications themselves for future sheathing. To do this, remove all dirt from surfaces where necessary, repair cracks and check the strength of all surfaces. Also carry out all the necessary work on tying pipes, building interchanges, and so on.

Advice. Use pipe insulation, this will reduce the noise characteristics of the finished structure. Another option to reduce noise and protect pipes is to fill the interior with foam, but this option requires skill and experience, in addition, you will no longer be able to access the pipes after that.

After that, proceed to the installation of the supporting structure. To do this, fix the guide profile on the walls and ceiling. To all base surfaces, it is necessary to hem exactly the guide type of profile, marked as UD. Make the distance between the fasteners within half a meter. Lay a sealing tape between the profile and the surfaces, this will provide additional insulation to the structure and reduce its vibration noise.
To build transverse jumpers, you must use scissors for metal and a die cutter. To do this, first mark and cut out the “U”-shaped elements of the jumpers, opening the carrier profile from the inside out, which will create petals with which the profile will be mounted to the structure. When everything is ready, use the die cutter and attach the structural elements to each other. The advantage of the cutter is that the surfaces of the elements to be joined remain smooth, therefore, with further sheathing of the gypsum plasterboard, swelling and distortion will not occur.
Finally, everything is ready for sheathing with GKL sheets. Make a distance at the joints of the sheets of at least three millimeters, in the future these places will be puttied. Fasten them every thirty centimeters. If it is necessary to install a hatch for access to valves and meters, reinforce its edges with bars at the stage of frame construction. This will increase the strength of the finished structure.

After the structure is sheathed, proceed to the finishing work. Close all joints of the plates with a rough putty, then, without waiting for it to dry, glue them and apply the finishing layer of putty. Do not forget to also close all the caps of the screws.

An important detail: if in the future it is planned to tile the resulting structure with tiles, the transverse load-bearing profiles must be placed every thirty centimeters - for a general strengthening of the structure. And the GKL sheet itself must be taken with a thickness of at least twelve millimeters.

It remains only to apply a layer of primer and top coat. Congratulations! The GKL box for pipes is ready.

Conclusion

According to the same scheme, you can close, for example, heating pipes using drywall, or hide ventilation ducts and other communications. Strictly speaking, lining pipes with drywall is simple, affordable and reliable.

In addition to blocking pipes in the bathroom, drywall can close heating pipes or ventilation ducts.

In addition, you can do this work yourself, and the result will be more than excellent. Try to work with GKL, and you will understand that this is an easy and exciting process that gives a high-quality result. Most likely, you will want to use such material as drywall more than once.

If you are thinking about how to close the pipes with drywall, start your work by creating a drawing of your future design.

Without experience, opt for the simplest design - boxes. If you already know how to handle this material, then you can make not just a box of rectangular or square section, but a more complex structure, which, for example, will combine a false wall and a countertop.

We give such advice, since it is necessary to close the pipes with drywall with maximum benefit for yourself and with minimal losses for the usable area of \u200b\u200bthe room.

Assembling the frame structure

Work is best done in the following sequence:

Using a broom and a vacuum cleaner, clean the area where you will mount the structure from dust and debris.
Be sure to treat the wall behind the pipes, which will later be hidden behind drywall, with an antiseptic - this will prevent the appearance of fungus and mold inside the structure, which will be quite difficult to disassemble without damage. Use a spray gun to treat the wall.

Do not save on antiseptic - it should literally drain from the wall, and not cover it with a thin layer.

Mark the location of the structural frame elements, given that there should be at least three centimeters from pipes to drywall. If you are going to close communications with a solid false wall, then to install the frame, choose the most protruding point (usually a radiator), adding 3 centimeters to it.
If you don’t have a laser level at hand (it is also called a “laser level”), you can use an ordinary pencil and a building level to draw lines on the walls.

Fasten the metal drywall guides to the walls so that their outer edge coincides with the boundary lines you have drawn for the future structure.
Assemble the entire frame of the structure (along the perimeter), fixing the guides not only on the walls, but also on the ceiling and on the floor.
Install intermediate vertical guides from a metal profile. Be sure to check their verticality with a laser level or building level.
The individual guides should be fixed to each other either with the help of a professional cutter or with the help of self-tapping screws.

The heads of the self-tapping screws still protrude slightly above the surface of the profile and the material in this place will bend. Such a bend in the future will need to be leveled with putty, which will complicate your work.

Fasten the cross members of the structure frame. For drywall with a thickness of 12 mm, the size of the “cage” side of the frame should not exceed 60 centimeters, otherwise the structure will not have the strength you need.
To prevent the frame you have assembled from “walking” relative to the plane of the wall that it covers, attach it to it with small corners, also made of metal guides. Do not forget to check the verticality of the frame elements.

When marking sheets, be guided by the following principle: if you can cut drywall, as they say, “in place”, without using a pencil and tape measure, do just that. This will speed up the entire process of assembling the structure, and besides, you will not be mistaken in size.

In this case, the pinning process will look like this:

Lean a piece of drywall that is larger than you need against the part of the structure frame where you are going to mount it.
Attach it to the frame in two or three places.
With a knife, mark the edge of the sheet you need by cutting through a layer of cardboard.
Gently break the material along the cut line.
Bend the unnecessary part and cut the remaining whole cardboard with a knife.

You can fasten drywall to the frame either with a screwdriver and self-tapping screws, or using a special nozzle for a screwdriver to work with this material.

The step between the screws that attach the drywall to the frame should not exceed 25 centimeters.

Plasterboard finishing

The fully wired frame of the structure must be carefully puttiedso that its surface is smooth and even. All the irregularities that appear in the putty must be wiped off. And since it is necessary to close the pipes with drywall as imperceptibly as possible, it is better to line the erected structure from above with the same material as the rest of the walls in the room: stick wallpaper, lay ceramic tiles, etc.

Video

These videos will help you cope with the job of masking pipes with drywall.