Almost any bathroom is fully or partially lined with ceramic tiles. Today, this material is considered, perhaps, unsurpassed for rooms with high humidity. Approximately 80% of the collections of all global tile manufacturers are dedicated specifically to bathrooms. Laying and replacing tiles in the bathroom are in incredible demand. This is especially true for cities such as Moscow or St. Petersburg, where you can buy tiles of any price range. different manufacturers, such as, for example:
- Russian Kerabud and Ukrainian Atem
- Polish Cersanit, Oposzno and Paradyz
- Spanish Peronda, Venis and Rocersa
- Italian Ragno, Atlas Concorde and Caesar
Each collection is presented not only in different price ranges, but also in various sizes and forms. Therefore, laying or replacing tiles should only be carried out by an experienced specialist, who can be easily found on the Youdo crowdsource exchange.
Why do you need to replace tiles?
Bathroom tiles, especially floor tiles, are often exposed to external impacts. In addition, the replacement of tiles in the bathroom may be necessary in the following situations:
- the house has shrunk, the wall has sagged, and the tiles have crumbled, or have chipped and cracked
- over time, the old one fell asleep grout mixture from the seams, and began to get enough dry adhesive mixture, as a result of which voids appeared under the tile, and it failed
- the bathroom is being renovated, for which it is necessary to remove all or part of the old tile
In each of these situations, the replacement of tiles will take place taking into account certain features.
Bathroom tile replacement
Despite the specifics of the work on replacing tiles in the bathroom, depending on the situation that caused it, there is a general algorithm for carrying out this procedure:
- removal of damaged tiles or their row with complete cleaning of the surface on which they were located
- restoration of the base of the wall or floor on which the new tile will be laid
- direct laying of new material using a level and a rubber mallet
- decorative Finishing work after laying the tiles, including grouting the joints with special grout mixtures
It may happen that the “classic of the genre” - tiles - is fed up, and you want to somehow change the design of the bathroom, make it more original. Let's try to get to the heart of the matter and find out what finishes you can choose and how to replace the tiles in the bathroom so that the space of this room does not lose its beauty and functionality, but at the same time is completely transformed.
It is advisable to use materials that meet certain requirements dictated by the specifics this room. First of all, it is moisture resistance, practicality and, of course, aesthetics.
Create a cozy and comfortable interior bathroom can be used as a finish:
- waterproof wallpaper;
- paint;
- mirror and glass tiles;
- mosaic;
- wood;
- phototile;
- fake diamond;
- the liquid wallpaper.
If you are looking for an acceptable replacement option for the floor, then good decision can become styling artificial stone or screed floors.
Self-leveling floors in the bathroom look interesting and unusual
Before replacing the tiles in the bathroom with any Alternative option, you need to make sure that the preferred material will outperform, or at least be as good as, decades of proven tile.
Plastic panels
The material is attractive for practicality, simple installation technology and affordability. Amazing variety of species plastic panels, excellent in texture, tint solutions and sizes. They can have a glossy or matte finish. The most demanded PVC panels white color, pastel colors and imitation natural stone- onyx, marble, etc. You can purchase panels that are difficult to distinguish from tiled cladding.
Decorate bathroom interior modern style possible with plastic panels
This bathroom finish does not require alignment of the walls, it is moisture resistant. It is advisable to use panels for the ceiling. The disadvantages of the material include not very high strength characteristics. If you neglect the careful sealing of the seams, mold may appear on the inner surface of the panels. The material is attached to the crate.
Wallpaper in the bathroom - unusual, but quite possible
Good alternative tiles in the bathroom - the use of wallpaper, which is recommended to be combined, for example, with tiles or decorative panels. The usual paper version is unsuitable for the bathroom. You can only use products with the marking "three waves", indicating increased moisture resistance. The facing material is coated with a water-repellent layer, withstands temperature changes and is immune to the penetration of hot steam.
Vinyl or fiberglass moisture-resistant wallpaper is a great replacement for boring tiles. But this option for changing the interior requires the use of a moisture-resistant primer, and the glue must contain antifungal components.
Vinyl wallpaper with 3d glitter will look very unusual on the walls of the bathroom.
Very practical in bathrooms - washable wallpaper. Their surface is covered protective film and less susceptible to the damaging effects of moisture.
Washable wallpaper for bathrooms
As additional protection from moisture, the joints of the canvases are coated with silicone sealant. Wallpapers with bright, colorful patterns and patterns are perfect. It should be borne in mind that the life of the wallpaper in the bathroom is quite short. The option will be of interest to lovers of frequent changes.
Glass and mirror tiles
Glass tiles are an elegant and original, but rather expensive way of finishing. The material is durable, does not deform, long time does not lose its attractiveness. An extensive range of formats and colors allows you to implement almost any, even the most daring, design ideas. Such a surface is hygienic and safe. It is easy to care for it with glass cleaners.
Mirror tiles on the ceiling in the bathroom will visually expand the space.
An excellent choice for a bathroom can be a tile imitating granite, phosphorus, silver, or a material with the effect of an icy surface. For connoisseurs of original and elegant design, glass tiles truly open up unlimited possibilities. This cladding is suitable for both walls and floors.
Mirror tiles - lovely decoration for the bathroom
An excellent effect can be achieved by combining ceramic and glass tiles, especially since the same thickness of the materials somewhat simplifies working with them. Calling on your imagination to help, you can create unique, inimitable compositions.
Bathroom interior combines glass and ceramic tiles
Often, glass decor is used to decorate the bathroom, which is produced in the form of tiles. different color having a thickness of 4 mm. Their size is usually 100x100 or 65x65 mm. Such facing material used to create decorative panels and mosaic patterns.
Mosaic on the bathroom wall
A great alternative to bathroom tiles is mirror tiles. The room, lined with such material, has an exclusive, stylish look. At correct selection adhesive mixtures, the tile is securely held on the surface for a long time, it is not afraid of either heat or moisture. Mirror tiles visually increase the space of the room. More often the color of the reflective layer is silver, but other dyes (blue, gold, pale pink, etc.) can also be used.
Plastic mirror panels look like tiles, but it is a flexible material suitable for applications not only on flat surfaces. With large panels, finishing work progresses faster. This is facilitated by the low weight of the sheets. The panel is a plastic base coated with a reflective film. It can be transparent or glossy, sometimes it has a decorative pattern. It can be given any shape using an ordinary clerical knife.
Plastic mirror panels
You can list all the ways to design a bathroom for a long time, especially when you consider the many various ways combination of materials. Nobody better specialists who know all the intricacies of working with each specific finish option will not complete this task. Therefore, in the absence of practical skills and experience in this area, the most rational decision there will be an appeal to professionals.
Since the bathroom is the room that we visit most often, the need for its repair increases dramatically. However, many are wondering why the tiles in the bathroom are falling off? Over time, various flaws appear on the surface of the tile, and therefore restoration of the tiles in the bathroom will be required. This is often due to the fact that constant humidity affects the entire surface, as well as a sharp change in temperature, which causes the tiles in the bathroom to crack.
If the tile in the bathroom is swollen, this indicates that during operation moisture got under it or errors were made during its installation.
If your bathroom tile is coming off or it just started to crack, then this indicates the need to restore it.
That being said, enough people are asking seasoned experts how to restore bathroom tiles without having to renovate the entire bathroom. Let's consider what is the replacement of tiles in the bathroom and how this can be done.
How to repair the tiles in the bathroom if there are cracks in some places? This can be done in the following way. First you need to clean the dirt in the cracks with water. Then mix the glue with paint that matches the color of the tile. After that, we close up all the defects with the resulting composition. Note that such restoration of old tiles in the bathroom as wall painting is practically not used at the present time, since this is not the elimination of the causes of the problem, but only the “hiding” of shortcomings. But at the same time this option is budget. With this solution to the problem, the old tiles in the bathroom will continue to crack. Therefore, replacing tiles in the bathroom is the only the right decision all problems.
Tile repair - where to start?
Repairing bathroom tiles is a process that requires care and attention. In this article we will understand what points the restoration consists of. tiles in the bathroom. And also, in fact, how to change the tiles in the bathroom with your own hands.
Repair of tiles in the bathroom, for starters, includes preliminary work that is associated with preparing the surface for tiles.
Before changing the tiles in the bathroom, you should clean the ceiling and walls from the previous coating.
We change the tiles in the bathroom with the help of special tools. For convenience, we recommend that you use a mechanical puncher (with a spatula attachment), building hair dryer(which softens the paint), with a spatula, or even with a chisel (you can easily renew old tiles in the bathroom with it). After the complete removal of the previous coating, the work surface should be treated before the next stage of restoration of the tiles in the bathroom. To do this, it is enough to use a soap solution.
Bathroom tile restoration next step includes the process of priming with ordinary glue, which is diluted with water in a ratio of 1 to 1.
After that you can already install door frame for future doors. If necessary, at the same stage, the procedure for leveling the ceiling surface is carried out - for which it is necessary to putty the surface. Final stage renovation is, in fact, the replacement of tiles in the bathroom. Experienced craftsmen know how to renovate bathroom tiles without resorting to complex and expensive methods. For example, in order not to crack the tiles in the bathroom, it is necessary to pre-strengthen the ceiling and walls with a special mesh.
Basic rules for laying tiles
Before you start laying tiles, you need to take care of all necessary tools, which greatly facilitate the repair of tiles in the bathroom:
- level;
- mastic, glue and solutions;
- spatula;
- set of distributors.
Next, we make a complete marking of the walls using a vertical level. You should also determine where the bathroom tile replacement will start from, since a symmetrical pattern should start from the central part of the wall or other surface.
If the tile has a uniform texture, then it should be laid from the lower left corner. To prevent cracks on the tiles in the bathroom, it is necessary to fix plastic crosses between the tiles. The thickness of the crosses will depend on the size of the tile - than more tiles- the thicker the crosses should be.
Please note that in order not to fall off the tile in the bathroom, it must be laid as follows. The very first tile is located at the intersection of horizontal and vertical marking lines. Next, glue the second tile next to it. The third tile must be applied a little higher than the first, so that the tile in the bathroom does not crack. This way of laying is a kind of steps, which we continue to lay up and to the side. In the photo below you can see how to do it correctly.
After 20-25 days, we overwrite the seams with a special solution. Grouting is not only wonderful way how to update the tiles in the bathroom, but also a necessary procedure.
Replacing broken tiles
Very often you may encounter the fact that one of the tiles on the lining is cracked or damaged. AT this case nothing will help except replacing the damaged tile with a new tile. You can easily do it yourself, quickly and simply. The first thing to consider is the strength of the adhesive on which the damaged tile was planted. After all, the stronger the glue was, the more difficult it will be to dismantle the damaged tile.
If the tile does not hold tightly, a light blow will be enough for the tile to fall off, but if the damaged tile is firmly planted on the glue, you will have to use a chisel plus everything. Just chip the tile into pieces, breaking it into pieces, it is easier to peel off.
When the damaged tile has been removed, before sticking a new one in its place, you need to prepare the surface. The first thing to do is to clear the place of the slightest fragments and remnants of the old glue. When the surface is completely cleaned, you need to prepare a new tile. Carefully check the match of the size of the tiles and the nuances of the shades. If there is a pattern on the tile, make sure that it matches the pattern of the previously laid out, pasted tile.
In this article, you learned how to restore the tiles in the bathroom with your own hands, without resorting to complex and costly procedures. We also note that updating the tiles in the bathroom is a great opportunity Plus, freshen up your home.
Ceramic tiles are widely used as a finishing material.
No matter how carefully you handle it, cracks appear on ceramic tiles over time.
Cracks not only worsen appearance rooms, but also cause dirt and moisture to enter the walls. And this can lead to mold and fungi. How do you remove tiles without damaging them?
There are many ways to remove damaged ceramic tiles.
We are interested in those that can be easily done at home by a novice master with his own hands. In order to repair damaged ceramic tiles, you must carefully remove the damaged area.
Preparatory stage
Lay a piece on the floor polyethylene film. Prepare protective equipment:
- glasses;
- gloves;
- respirator or gauze mask.
Areas adjacent to the removed tile are recommended to be protected in advance. To do this, insulating is glued to the tile, masking tape or tape.
True, there are traces of adhesive tape on the tile that must be removed at the end of the work.
Destroyed tile removal procedure
Grout removal toolRepairing a cracked tile begins with a survey of the area to be removed.
First of all, you should make sure that there is no under the tile electrical wires or plumbing or heating pipes.
Demolition work begins by removing grout from all edges of the cracked tile. The grout can be removed manually, or you can use a power tool. For example, an angle grinder equipped with an abrasive wheel and a vacuum cleaner. But we must immediately warn that the use of the grinder is accompanied by the formation a large number dust.
At manual way grout remover is best to use:
- putty knife;
- screwdriver;
- chisel;
- sharp shoe knife.
Yes, and you can not do without a needle file.
Before replacing a damaged tile, care must be taken.
We remove the grout
Scratching seams With help sharp knife cut along the seam line. With a spatula or chisel, remove the old grout from the edges to the cut line. Clean the remaining pieces of grout with a file.
By the way, the grout can be removed and by chemical means. But for this you must know what material the grout was made of.
After removing the grout, you can begin to dismantle the cracked tile.
In the damaged parts, it is necessary to drill a dozen holes, evenly distributing them over the entire surface. This allows you to relieve tension and not damage adjacent tiles.
Adhesive removal Using a hammer and chisel, all pieces of cracked tiles are carefully removed. To remove pieces, it is recommended to use a hammer weighing up to 200 g and a sharply sharpened chisel. The sharpening angle of the chisel should not exceed 60°.
Hammer blows should be soft, without accent.
Try to remove tiles in small pieces, avoiding cracking adjacent tiles.
After removing pieces of old tiles, proceed to clean up traces of tile adhesive or mortar.
To answer the question of how to replace a cracked tile, you must not only arm yourself with information, but also prepare right tool and auxiliary materials. We have already talked about the tools above.
Replacing cracked tiles
Take a new tile, apply it to the prepared place, check with building level or rulers. If the tile is uneven, remove any spots or elevations that prevent the tile from adhering to the wall.
Laying tiles Before laying a new tile on the floor surface, it should be vacuumed and treated with an acrylic primer.
Ceramic tiles with glue applied to it are applied to the wall and are easily pressed down. Plastic crosses are inserted into the inter-joint space. Aligning tiles is best done with pressure or a rubber mallet, the main thing is not to overdo it.
Replacing cracked tiles is completed by applying grout and.
Do-it-yourself tile repair with improvised materials
At home, you can glue a broken tile in almost any kind. It is important to remember only that acrylic sealant cannot be applied when the tile is in contact with water. But silicone sealants perfectly hold it, and even an inexperienced master can easily glue the fallen tiles into place. This method is often used for local repair of fallen ceramic tiles. A good option are liquid nails. In this case, you need to read the instructions and pay attention to the method of application and the time of fixing the glue.
Tiled flooring is considered to be the most resistant, durable and reliable. There is no doubt about this, because almost every homeowner, for example, has a bathroom decorated with ceramic tiles that have served with dignity for many years. But sometimes it happens that even on such reliable coverage, over time, damage appears that is easy to remove with minor repairs bathroom, tiles lend themselves well to restoration.
The occurrence of imperfections and damage on the tiled surface is caused by a number of the following reasons:
Factors leading to material damage
If the master makes mistakes, over time the tile will begin to fall off, and damage will appear. Among the main types of such errors are:
Materials and tools
If you have made a decision about self-fulfillment restoration of the tiled floor, prepare the following set of materials and tools in advance so that you do not experience any inconvenience during the work. These materials include:
How to repair ceramic tiles in the bathroom?
Each acquired defect on the tile requires a special repair, so we suggest considering the most common types of repairs. 
Chip and crack repair technology
The tile has peeled off but is still holding.
In such a case, do the following:
How to remove a hard-holding damaged tile?
What to "plant" the old tile?
There are several options for mixtures on which you can re-fix the old piece of tile. Among the most popular methods, experts recommend:
Installation of new tiles - rules
If you decide to do a more thorough renovation of the bathroom, tiling is not the most difficult stage. The strength of its adhesion to the base largely depends on the quality of the preparatory work performed.
To do this qualitatively, adhere to the following scheme:
How to replace grout?
Over time, stains appear on the tile joints, which violate the aesthetic appearance of the floor or wall, while the tile itself remains in excellent condition. It will not be difficult to replace the grout, and the appearance of the tile will immediately change. To replace the grout, do the following:
How to revive the color of a tile?
Today, in specialized stores, there are many chemicals, which are able to update the appearance of the tile. But there are other ways besides this, one of which you can choose based on personal preferences and creativity. 
Ways to update the hue include:
Video
If you decide to completely change the design of the bathroom and make styling new tiles, check out the proposed video example, which clearly shows this process in full.
Conclusion
As you can see, repairing ceramic tiles in the bathroom is quite easy to do with your own hands. It won't take you much effort or time. Updated by any of the above methods, the tiled surface will sparkle again and can last for many years.
Loading...