Finishing panels for walls inside the apartment. Decorative panels for interior wall decoration: types, materials, installation nuances. Glass and mirror

The interior decoration of apartments and houses requires a careful choice of materials that will cover different surfaces in the home. Particular attention should be paid to the walls that create comfort in the house. An excellent option are wall panels for interior decoration, the range of which on the building materials market is very large. It is necessary to choose the right manufacturer, take into account the features of the rooms, the location of the house, the quality of the proposed material, its service life, etc.

Such types of finishing materials as wall panels are in demand among consumers for several factors. Firstly, a large selection of colors, shapes and materials. Secondly, there is a significant simplification of repair. Thirdly, you can combine several types and shapes of wall panels, giving originality to the design of the room. Fourthly, the cost of repairs is reduced, since the walls are covered with panels without plaster.

Wall panels for interior decoration are divided into several types:

• Rack typesetting panels. Use for decoration of rooms, nurseries, hallways, halls. Suitable for closing corners - internal and external. The length of the slats varies from 2.4 m to 3.6 m, with a width of 12.5 to 30 cm and a thickness of 8 to 12 mm. Rack panels are colored, white, beige, made under different types of wood. The connection takes place according to the "thorn-groove" system. The joints are closed with special corners, plugs, skirting boards, so that the installation looks neat. Quite often, rack panels made of wood and called "lining" are used in the design of premises. From above, such material is varnished, stained, painted, creating the effect of an old tree.

• Sheet panels. Their main difference is their large size - 122 by 244 cm, thickness 6 mm. Sheets are assembled quickly and easily, despite the dimensions. Wall sheet panels are made from several layers of fiberboard and PVC; for strength, the sheets are impregnated with special solutions. In appearance, this version of the panels often imitates stone, wood, brick. Mounting to the wall is carried out using ordinary glue, if not possible, then the crate is not done.

• Tiled wall panels. Suitable for decorating living rooms, fireplace areas, bedrooms. This type of finishing material gives the walls volume, relief, especially if the original pattern is applied to the panels. Between themselves, the tiled panels are connected in a locking way. The tiles are of different sizes. For example, 30 by 30 cm, 60 by 60 cm, 90 by 90 cm. Such plates can be used to cover a fairly large area, making an interesting and unique pattern on the walls. Panels can imitate different types of wood, natural stone.

Wall panels by material

Wall coverings are made of chipboard, MDF, fiberboard, PVC, wood, glass, cork, stone chips, gypsum and other materials. Most often, it is wood that is used, since it is easy to process, care for and has a long service life. Consumers who want something original choose acoustic or cork panels for interior wall cladding.

The main materials from which wall coverings are made include:

• Wood. It has been used for wall cladding for a long time, but before the panels were massive and bulky, they were expensive, because of this they were inaccessible to most buyers. Now wood wall panels are made from cheaper types of wood. For example, the front layer is made from valuable varieties of wood, and then it is combined with a spruce or pine base. Panels are made from sawdust or wood chips. Such materials for wall panels are recognized as environmentally friendly and cheap.
• Chipboard and fiberboard. Budget option for decorating walls with wood materials. Panels made of fiberboard or chipboard have excellent soundproofing qualities, retain heat in rooms, and dampen external noise. At the same time, this type of coating is susceptible to deformation due to moisture, steam, and temperature changes.
• MDF. Such material is an improved version of chipboard. In MDF, not formaldehyde resins are used, but vegetable lignin. As a result, MDF panels have received high strength, withstand moisture, do not deform, and therefore have a longer service life. After installation, MDF panels can be varnished, veneered with various types of wood, laminated, coated with solutions to repel water. The panels are used to decorate offices, houses and apartments in which residents want to create a high level of comfort and coziness.
• PVC. The panels are not afraid of moisture, damp and resistant to deformation, do not fade. Similar characteristics of plastic appeared after the best material was used in production. PVC panels can be plain, colored, with drawings. They are used to decorate kitchens and bathrooms. It is not recommended to sheathe the entire apartment with PVC, otherwise it will cause an increase in humidity throughout the dwelling.
• Bamboo. Wall panels are made only from young bamboo, as it is easier to process with moisture, weave, press and apply acrylic paint, varnish. Bamboo slabs are produced for walls, 100 by 190 cm and 120 by 240 cm in size. Wall covering is pasted over with two-layer, three-layer, five-layer, seven-layer slabs. The thickness of the plates varies from 1 to 7 mm. Bamboo slabs smaller than 1mm (single layer) are not suitable for wall application, but are great for hiding corners and joints. The choice of coating thickness depends on the condition of the walls. If it is necessary to hide large irregularities and defects, then five- and seven-layer plates are used. There are bamboo wall panels with a 3D effect, the size of which is different: 30 by 30 cm, 50 by 50 cm and 62.5 by 80 cm, the thickness of the plates is no more than 1.5 mm.
• 3D panels. Such material is a new trend in the design of interior spaces, since a three-dimensional pattern is created on the walls. Such panels are made of wood, gypsum, glass, plastic, which give the room an unusual look. 3D panels have a long service life and do not require special care. It is enough to wipe the panel with a dry cloth to remove dust.

Types of 3D panels

Volumetric panels should be considered separately, as they are increasingly used to decorate living spaces. The main data types of wall panels include:

• Glass - resistant to external influences, not affected by moisture and temperature changes. The glass base allows the wall covering to serve for a long time. This is very important for panels with drawings and decorative elements. Recommended for wall decoration in bathrooms and kitchens.

• Stone veneer - a combination of "stone" pattern and its natural roughness. Similar panels on the wall, made under the stone, are lightweight, flexible, durable. Veneer panels are attached to the walls with glue. Stone veneer is produced in the form of panels or tiles, the thickness of which does not exceed 4 mm.

• Metal - the latest trend in the production of wall panels that have an original and beautiful metal finish. The surface of such panels is solid, the thickness of the material varies from 0.5 to 2 mm. The metal film is made from a special liquid solution, which is applied to a different base. It can be wood, ceramics, concrete, metal and plastic. The panels can be sanded, polished and engraved, which allows you to create an interesting decor and pattern for the walls, various textures that will imitate patina, corrosion, rust, bronze, copper.

• Cork - are produced in the form of plates and sheets, fit perfectly into any design of the premises. Cork wall panels are used to reduce the level of noise from the outside, to soundproof the room, and to insulate it. The cork is resistant to moisture and temperature changes, so the material does not deform, does not absorb odors, and does not require special skills for wall mounting.

• Acoustic - suitable for living quarters in which there is a low level of sound insulation, and sounds from neighbors and from the street are clearly heard. They are made from different materials, the main one being PVC. Sound dampening occurs due to the porous structure of the material. You can use acoustic foam rubber to cover the walls, which is perfectly combined with plastic, wooden, plasterboard panels.

• Gypsum - made from gypsum, which is similar in strength to artificial stone. Such panels for walls are distinguished by safety, environmental friendliness, high sound-proofing qualities, and heat preservation in the room. Gypsum panels are distinguished by a wide variety of patterns, decorative ornaments, volume, colors, the ability to create an individual design on such a coating. Do not use in rooms with high humidity. Perfect for decorating living rooms in a classic style.

Overview of wall panel manufacturers

For walls in apartments and houses, you should carefully choose high-quality panels that are produced by trusted firms and companies. Rating of the best panel manufacturers in the ratio "price and quality":

1. artpole.
2. cork art.
3. Coswick.
4. Decoplast.
5. Eucatex.
6. Granorte.
7. Kronospan.
8. Kronostar.
9. Eurostar.

Consumers really like domestic brand wall panels:

• "Ortho" - high quality panels that use thermal printing.
• "Alta Profile" - panels can be varnished or laminated.
• "Union" and "Decor-panel", distinguished by affordable prices, a large assortment, a variety of materials from which the panels are made.

The list of the best manufacturers of MDF panels includes:

1. Swiss Krono Group (Austria, Switzerland) - produce MDF boards of the Kronostar brand. They are laid on the walls in different ways - horizontal, vertical, at an angle.
2. P&M Kaindl (Austria) is a leader in the production of MDF panels, which are environmentally friendly and have a large assortment.
3. Sonae Industria (Portugal) is one of the largest and oldest wall covering companies.
4. Kastamonu (Bosnia and Herzegovina, Romania, Turkey) - products are characterized by low cost, high quality products, which have different coatings, sizes, patterns and decor.

The best manufacturers of plastic wall panels for interior decoration include:

• Venta (Belgium), producing panels of various shapes and designs. There is a material with a cladding effect that looks great on the walls.
• Forte (Italy) - specializes in the production of decorative and exclusive panels for walls, in the production of which stone chips are used.
• Deceuninck (France, Great Britain, Russia) - produces panels that belong to the "quality and price" category. The material for the walls is of high quality, does not deform, and tolerates the influence of ultraviolet rays perfectly.
• Shanghai Zhuan (China) - produces panels from plastic, wood, cork. On the market you can find products of different colors and shades.
• LLC "Green Line" (Russia) - raw materials for products are brought from Europe. The panels of this company have strong joints, which ensures durability in use.
• LLC "Planet Plastic" (Russian Federation, Moscow) - the company produces panels from different materials, but specializes in the production of PVC plates and sheets, which differ in thickness, width, length. Drawings are applied to the panels using offset and thermal transfer printing.
• EVROPLAST service (Russia, Samara region) - panels are produced according to European technologies in compliance with quality requirements.

Panels for interior wall decoration in apartments and houses help to hide the imperfections of wall coverings, eliminate gaps, irregularities. In addition, such wall material helps to make housing more comfortable and cozy, thanks to its high sound and noise insulation qualities, and heat retention. A large selection of wall panels, which are made from various materials, help to create an individual style in the room, which will take into account the nuances and features of the premises.

To date, wall panels are considered a fairly popular type of finishing material. Easy installation and beautiful appearance help create a real masterpiece of design art. Modern technologies make it possible to obtain natural and synthetic surfaces.

They have a huge number of advantages rather than disadvantages. A variety of colors and shades help you choose the right model of plastic panels for your interior space.

Pros and cons of plastic panels

This material has a large number of positive qualities. They include:

• easy installation. Installing such material will not be difficult. Finishing wall panels requires special care. First of all, it is necessary to prepare a frame on which each plastic element will be attached;
• heat and sound insulation. There is a small distance between the wall and the panels, which absorbs the loud sound. In addition, an "air cushion" of warm air appears here. This, in turn, prevents cold air masses from entering the interior of the room.
• a light weight. This design looks neat on the surface of the wall;
• durability. The materials and components that make up the panels are particularly durable;
• affordable price. Artificial wall panels have a low price range. Natural materials have a beautiful appearance and have a higher price. As a rule, they have high strength.

Modern panels can imitate natural solid wood, brick and other types of surfaces.

Varieties of design

In building stores there is a huge selection of finishing materials. Each type is distinguished by a peculiar modification, method of attachment and structural components. On sale are:

Rack elements. They are long slats whose size ranges from 250 cm to 350 cm. The thickness of each part varies from 9 to 15 mm. Such material is suitable for decorating a small room or its corner parts.

Installation of wall panels of rack construction is carried out by fastening parts to a metal frame using short self-tapping screws.

Tiled structures. They are large squares. The dimensions of the panels range from 40 to 80 cm. The installation of such elements is carried out using a special adhesive. You can also use additional fasteners that fix the elements together.

Such structures are made from chipboard MDF, fiberboard and chipboard. These materials have a low cost, which makes them accessible to absolutely everyone.

Sheet panels. Among all models, they have the largest parameters. The length of the finished product is about 1.5 * 2.5 m. The thickness of the canvas varies between 5 -7 mm. They consist of a fiberboard or MDF board. On the surface of the panel there is a textured base that imitates natural wood, tiles or bricks.

Design of interior space

A huge variety of models allows you to choose the right option for wall decoration. For each room, it is recommended to choose the appropriate panels. Here it is important to consider the composition and surface of the structure.

For high-tech, modern and minimalist design, panels in the form of a convex abstraction are suitable. The classic interior prefers solid wood elements. They have a beautiful appearance and high cost.

Country and loft design require a rail system for attaching elements. Here it is absolutely not necessary to decorate the entire wall. It is enough to highlight the corner parts of the room with elements made of solid pine or oak.

Wall panels for the kitchen can be made of glass or MDF material. A protective film may be present here, which will retain the original appearance of the product for a long period of time. For the design of the kitchen area, a tiled version of the design is suitable. The surface is perfectly cleaned with detergent.

Wall panels for a room are most often made in the form of sheets or rack construction. As a rule, they are attached with special glue or additional clamps. Many designers prefer the presence of natural materials in the interior of the room.

For this, a wooden beam is suitable, which is attached vertically to the base of the wall. This will visually increase the living space. Each element is fixed on a pre-prepared frame.

Wall panels for the bathroom are long flat parts that are attached to each other with additional locks. Mounting bases are also made here. To do this, use metal plates with additional holes. This will ensure that the parts are neatly connected to each other.

How to choose the right wall panels?

At first glance, choosing a wall decor is not difficult. In addition to a beautiful appearance, it is important to consider the following parameters:

• combustibility;
• flammability;
• toxicity. This item indicates the synthetic composition of the panels.
• smoke generation. The lower the values, the better the materials from which this design is made.

On the surface of the wall panels should not be chips and cracks. All these damages reduce the life of the product. If the parts consist of multilayer materials, then there should not be any bulges or dents.

The color palette of each element must be the same. If there are slight deviations, it is recommended to refuse to purchase this product. This indicates improper storage of the material or a violation of the manufacturing process.

Locks on the edges of the wall panels are a major requirement. They can be made of lightweight metals or durable plastic.

As you can see, decorating a living space is not difficult. Good imagination and quality materials help to create a real masterpiece. The photo of wall panels shows the best options for models that will decorate any interior space.

Photo of wall panels

A relatively new finishing material, which in such a short time has managed to gain incredible popularity among buyers and interior designers.

The main advantage of this option for interior wall decoration is the possibility of mounting on an unprepared uneven wall surface. Another big plus is that the installation of panels is so simple that it can almost always be done by hand, saving on the involvement of a professional craftsman. In addition, wall panels for interior decoration are beautiful, stylish and versatile for rooms of various stylistic concepts.

Advantages of wall panels

The modern construction market offers a wide range of decorative panels for interior wall decoration, made of various materials. The properties and performance capabilities of each type of wall panels directly depend on the material used as a base, the thickness of the slab, as well as on the technology of its production and the manufacturer. And yet, all modern wall panels, which you can buy in our online store, have a number of advantages over other options for interior wall cladding.

Advantages of wall panels over other materials:

• Ease of installation. Unlike wallpaper and ceramic tiles, for the installation of panels it is not necessary to level the walls and even completely clean the surface from old building coatings. It is enough just to properly mount the crate and fix the panels with fasteners. In addition, working with wall blocks is easy in terms of trimming, changing the size and shape of the slab. In many cases, you can finish the wall with such material for interior wall decoration on your own, with minimal training and a set of simple construction tools.
• Excellent sound and heat insulation of the room. Any wall panel after installation forms a kind of air gap between the wall and the rear surface of the material. This allows you to level the walls, and most importantly, to ensure a high level of noise and heat insulation of the room.
• The possibility of hidden placement of communications. In the cavity described above between the wall and the interior wall panel, any wires, cables and other communication systems can be discreetly placed. This allows you to make the room as comfortable and aesthetically attractive as possible for its inhabitants.
• Wide variety of species. In the modern construction market, you can buy a wide variety of wall panels for interior decoration. Photos of interiors, in which designers prefer this particular type of wall decoration, amaze with stylistic and aesthetic diversity. So, panels made of natural wood are a luxury and richness of the interior, while cheaper counterparts made of pressed wood-fiber materials will be an excellent solution for a modern minimalist decor.
• Price availability. Of course, there are a large number of wall panels, the price of which is not included in the category of budget materials for interior decoration. These are, as a rule, wooden wall panels for interior decoration made from precious woods, tempered glass surfaces and 3D volumetric panels with author's design. However, the vast majority of options are relatively inexpensive panels, which, in addition, can significantly save on professional installation.

In addition to the general advantages listed above, each specific type of material has its own advantages, which determine the possibility of using such panels in rooms for various operational purposes.

Characteristics of wall panels for interior decoration

When choosing decorative panels for interior wall decoration, it should be borne in mind that there are a number of requirements that a really high-quality and reliable option must meet. So the general requirements are:

• Ecological purity. The most environmentally friendly and safe, of course, are wall panels for interior decoration made of natural wood. However, it should be noted that modern synthetic and semi-synthetic materials are also made without the use of toxic components hazardous to health. This allows you to mount them even in rooms with sharp temperature changes, because the risk of fumes dangerous to humans is completely absent.
• Fire safety. It is very important to pay attention to the marking of wall panels, taking into account the fire hazard classification of materials. Here it should be borne in mind that in the event of a fire, the panels should not only not burn or melt, but also not cause smoke in the room. In this regard, experts recommend refusing to purchase panels for interior installation that do not have all the necessary quality conformity certificates.
• Humidity resistance. The issue of moisture resistance of the material for the production of wall panels for interior decoration is very acute, because often such lining is used in rooms with high humidity - bathrooms, kitchens, steam rooms, etc. Here, before making the final choice in favor of a particular material, you should definitely decide on the place of its installation. So, wooden panels for interior wall decoration are not recommended to be installed in the kitchen or bathroom, while plastic and glass perfectly tolerate high humidity loads and even direct contact with water. That is why wood is an excellent solution for wall cladding in a living room, office or bedroom, while plastic and glass are more often used to equip a working kitchen apron near the sink.
• Strength and durability. The resistance of the material to weight, mechanical and shock loads determines its durability. It is especially important to take this into account when choosing wall panels that will be used in children's rooms and other rooms with high loads.
• thermal stability. Changing the shape and geometry of the wall slab under the influence of temperature changes can be a serious problem and significantly worsen the aesthetics of the room. That is why preference should be given to heat-stable options, especially if the stove will be mounted near a window, front door, battery or stove.
• Hygiene. The decorative wall should be washed well, since not only the complexity of cleaning will depend on this, but also the duration of the preservation of the original appearance of the wall. It is especially important to consider this parameter before buying decorative wall panels for the kitchen, hallway or corridor.

When choosing among a wide range of types and types of wall panels for interior decoration, one should be guided primarily by the microclimatic conditions in the room and the interior style concept. A very original and exclusive cladding option is embossed and voluminous panels, which are often called 3D panels. This option is considered designer and is used most often in large areas, since it visually “compresses” the room somewhat.

Looking at the photo of wall panels for interior decoration, it is impossible not to pay attention to the variety of colors and textures. This is ensured by the possibility of coloring and laminating MDF blocks. Also often used are the techniques of aging, metallization and patination of the surface of the tiles. This significantly expands the range of decorative possibilities.

Classification of wall panels according to the form of release

By individual order today you can order wall panels for interior decoration of any shape and size. However, if blocks of standard sizes from well-known manufacturers are purchased, the buyer is invited to choose from three shape options:

• Tile. Small individual tiles of rectangular or square shape are usually 300 to 980 mm long and less than 500 mm wide. According to the type of material, texture, nature of the surface, such tiles can be varied and used in various rooms. Their installation is most often done on a wooden crate.
• Reiki. Long rectangular wall panels in the form of rails or clapboards are an excellent option for interior decoration of small areas, since this form allows you to visually increase the size of the room. It should be borne in mind that when choosing rails, the buyer must take into account the features of their installation. Most often, they, like tiles, are fixed to a wooden or metal crate of a wall, however, hidden clamps are used for inconspicuous fastening, and the slats are connected to each other using a tongue and groove system. The length of such rails depends on the height of the finished room and can reach 3,700 mm.
• Sheet panels. In fact, wide strips are called sheets, the width of which can reach 2450 mm. Such sheets often imitate the surfaces of natural materials such as stone or wood, while being made from pressed MDF or chipboard. Unlike wall panels of other forms, sheets are often mounted directly on a pre-prepared even and clean wall, using glue for fixing. To decorate the butt elements, special moldings are used.

The best wall panels for wall decoration depending on the material

Today, panels are made from various materials, which leads to the widest range of prices on the modern market. The most popular and in demand today include panels from the following materials:

• natural solid wood;
• cork;
• pressed wood fiber materials - MDF, chipboard, etc.;
• PVC, plastic;
• tempered and non-tempered glass;
• gypsum;
• acoustic foam, etc.

Wooden wall panels. The final choice always remains with the buyer and is largely determined by the cost of panels for interior decoration. One of the most expensive and at the same time beautiful options are wooden wall panels, which are distinguished by the best characteristics of environmental friendliness, safety and naturalness of the material. In addition, the tree has the ability to "breathe" in response to changes in the microclimate of the room. The most popular types of wood for interior wall decoration are oak, alder, beech, larch, walnut, etc.

Additionally, the wood surface can be treated with special water-repellent wax-based compounds. This makes the wood less sensitive to liquids, but it is still not recommended to mount such boards in rooms with high humidity. To achieve a certain decorative effect, they often resort to additional aging, patination and other techniques for aesthetic processing of wood wall panels. Also common is the technique of changing the visual characteristics of a tree, which makes it possible to imitate valuable wood species, using slabs from cheaper varieties as the basis.

The most popular are smooth surfaces that show a natural wood pattern. However, leading manufacturers also offer to the attention of buyers a new original version, made of split solid wood. Such panels look very original and embossed, because their appearance reveals the beauty of each fiber and knot of wood in the fault. For the manufacture of such unusual wooden wall panels, only a small number of wood species are used, including birch, ash and oak, due to the beautiful natural pattern and unusual texture of wood.

Wall panels made of MDF and chipboard. MDF is a material in the production process of which a small fraction of lumber is used, which is subjected to dry pressing with the additional action of very high temperatures. As a binding component in the manufacture of MDF, carbamide resins are used, which are safe for human health. This fact is the main difference between MDF panels and another very popular chipboard material - chipboard. The latter is made with the addition of toxic formaldehydes, which, evaporating, accumulate in the air and can have a sharply negative impact on human health. In this regard, chipboard wall panels can only be used for finishing non-residential and well-ventilated premises, while a safe analogue of MDF can be mounted to finish a home interior. You should buy MDF wall panels for interior decoration, taking into account their operational and decorative properties:

• Strength and wear resistance. Chipboard panels in terms of strength and hardness are superior to many types of solid wood. This allows us to talk about a high level of impact resistance and mechanical stability, which guarantees the durability of their use.
• High level of fire safety. Compared to solid wood panels, MDF boards have lower flammability ratings. It also reduces the risk of smoke in the event of a fire. Heat and sound insulation. Wall panels for indoor installation made of MDF provide a high level of insulation, both in terms of temperature and noise inside the room.
• Wide variety of textures and colors. The widest color palette, the ability to imitate various natural materials (solid wood, stone, leather, etc.) and create a variety of surface textures - all this became possible thanks to the use of special paints and lamination techniques. Also, in order to reduce the cost of the material, you can often find veneered wall panels, which are based on MDF. The difference between such models lies in the presence of a top layer made of solid natural wood. This allows you to achieve an aesthetic that exactly repeats solid wood panels.
• Today, manufacturers offer MDF panels that have a special water-repellent coating or a laminated surface. However, it is not recommended to mount such material on the walls of rooms with high humidity. With constant contact with water, even treated MDF absorbs a certain amount of liquid, changing its shape and geometry.
• PVC panels, natural cork, gypsum vinyl boards, as well as glass surfaces, most often used in the kitchen, as an apron for work areas, also have excellent performance properties.

Features of fastening wall panels

Installation of decorative wall panels can be carried out in two ways - glue and on the crate. The adhesive method involves fastening the panel to the wall using a special chemical composition that provides a strong fixation. In this case, before carrying out installation work, the wall should be carefully prepared - leveled, cleaned from old plaster, sanded, etc. Panels are glued onto a flat and clean surface, paying great attention to the correct distribution of glue. There should be more adhesive on the edges of the panel than in the center, but excess fixative chemistry should be avoided. This technique is most suitable for working with sheet panels, especially those that are light in weight (cork, MDF, etc.).

The method of adhesive mounting is used extremely rarely. The most common and successful solution is the installation of tiles on the crate. It can be made of wood, metal or plastic strips. Further, the panels are attached to the crate using classic fasteners. The most successful solution is the use of concealed mounting systems - clamps.

You can buy wall panels for interior decoration inexpensively, while receiving a guarantee of the highest quality and appreciating high-class service, using the catalog of the Seal Parquet online store. We offer our customers only the products of the world's leading manufacturers, with the possibility of targeted delivery of any volume of goods.

Different materials can be used for interior wall decoration in different rooms. Each species has its own characteristics, cost, appearance. An excellent choice for different rooms are special wall panels for interior decoration, which have a great appearance, imitate a variety of exquisite, unusual materials, and are easy to install, which even a beginner can handle.

The use of panels in conjunction with the crate makes it possible to hide various flaws, defects on the walls that cannot be eliminated by standard alignment. A photo of such panels is presented below in large numbers, and they look great in different interiors. Decorative panels are produced from different materials, but plastic products are most often chosen, which are reliable, high-quality, attractive and inexpensive.

For their production, different types of materials are used. Since they are intended for use in residential premises, they are environmentally friendly, therefore they cannot cause any harm to residents of an apartment or house. In the selection process, it is important to pay attention not only to the material of creation or the design of products, but also to their colors, appearance, since decorative panels for interior wall decoration should fit perfectly into the existing interior.

Rack

They are represented by small boards that are made of PVC or other popular materials. As a rule, their length varies from 240 to 370 cm. Due to the large selection of lengths, it is possible to choose products suitable for a certain wall height. The width can also be different, since it varies from 12.5 to 30 cm. The thickness starts from 8 mm and ends at 12 mm. Rack panels made of PVC or other materials are used, usually for low walls, and are also considered ideal for small rooms.

They are mounted using a frame created in advance on the walls, and metal profiles or wooden slats can be used to create it. The elements are connected to each other with special grooves and spikes, which they are equipped with even during the production process. These fasteners are located at the end of each part.

They are fixed to the frame with self-tapping screws or special brackets, and in the second case, you must have a special tool at your disposal - a construction stapler. If there is a need to make hidden installation, then clamps are used.

Elements can be mounted both vertically and horizontally. It is allowed to use a special way - a Christmas tree. Most often, PVC or chipboard, as well as MDF, are used to create rack products.

Wooden metal
MDF
PVC

Tiled

Presented in a square shape, and their sizes may be different. With the use of such panels, it is possible to lay out an original, unique picture on the wall. They are produced in a huge number of colors, textures, therefore they are an indispensable material in the process of the work of designers.

With the help of tiled products, an unsurpassed interior is formed, as well as unique design fantasies are embodied.

Such decorative panels are fastened for interior wall decoration with the help of clamps or special glue. It is allowed to combine them with other materials. Often they are used only for part of the wall. PVC elements are considered the most popular, as they are affordable and easy to use. Since all elements are of the same size, clear shapes, visual surface leveling is ensured, and a neat, really attractive finish is obtained.

leafy

They are considered the most convenient elements for prompt, high-quality installation. They are ideal for large spaces. Their dimensions are significant, and the thickness can even reach 6 mm.

Sheet elements are multi-layered, and the most popular are details that imitate a variety of exquisite, unique materials. They can be made of PVC or other raw materials. Their photos can be easily found on the Internet. Installation is carried out with the help of glue, but among themselves they are fixed with the help of special moldings. It is allowed to use them even in the case of preliminary creation of the frame.

Wooden

Wall panels for interior decoration, created from wood, can have different shapes and sizes. They are available both smooth and with a unique embossed pattern. For each individual interior, the most optimal and suitable option is selected.

To create them, oak or larch, cedar or alder wood is most often used. If cheap material is used, then unique technologies are used in the production process that provide imitation of expensive, refined wood. For this, special compositions are used that ensure the formation of darker fibers and an unusual texture.

Wooden elements are considered an excellent choice for any premises in residential real estate, and this is due to the following parameters:

• ecological purity due to the use of natural, safe components;
• if you choose a material that is impregnated with special moisture-resistant compounds at the factory, then it can be used even in rooms with a high level of humidity;
• wooden panels are presented in different forms, photos of which are located on the Internet, so for each room the optimal material is selected to create the coating;
• wood is considered a traditional material, the texture of which fits perfectly into a variety of interior styles, so a truly bright, unusual finish is guaranteed;
• the cost of such products may be different, since it depends on the raw materials used, however, for each person it is possible to choose an option at the best price.

The disadvantages of products formed from wood include the lack of good resistance to moisture or fire, if special protective coatings were not applied to them during the production process.

Cork

Cork panels are an excellent choice for any room. They have an incredibly large number of advantages, which include:

• environmental friendliness, since only safe components are used in the process of their production, as well as cork tree bark, which is considered high-quality and unique;
• from this material, products are obtained that are distinguished by high thermal and sound insulation parameters;
• seeing such panels in the photo, each person will be convinced of their attractiveness and originality;
• material racks before exposure to moisture;
• elements easily withstand high temperatures, and also do not support the combustion process;
• cork is not able to absorb foreign odors;
• it is resistant to ultraviolet radiation or temperature changes;
• Installation is simple, so anyone can handle it.

Cork panels can be not only wall, but even floor. They are equipped during the production process with locking joints, due to which not only the installation procedure is simplified, but also a seamless and even coating is obtained. They are available in different shades, so the creation of an optimal color coating is ensured.

Acoustic

They are most often used in apartments where sound insulation is low. Due to this finish, noise coming from neighbors, from the street or from the entrance is reduced. They are created from different materials, but PVC is most often used for this. Their important parameter is porosity, due to which excellent soundproofing parameters are provided.

The most commonly used insulator is acoustic foam, which comes in a variety of shapes and sizes. It is combined with plastic or other panels, so it is not visible after finishing. In addition to foam rubber, other soundproof materials can also be used, and usually their structure has a higher rigidity index. Installation of such products is easy, and the apartment becomes protected from extraneous sounds from the street or from neighbors.

Plastic or gypsum fiber acoustic panels are extremely common among apartment owners located in multi-family buildings. Due to their use, the soundproofing parameters of all residential real estate are increased, which significantly increases the comfort of living.

3D panels

They are also formed from PVC or other popular materials. They fit perfectly into different interior styles, and also have an incredible appearance. They become a unique decoration of any room.

As a rule, such plastic 3D panels are additionally highlighted with lighting, which improves the appearance of the wall. Drawings can be varied, and are selected depending on the room in which it is planned to carry out repair work.

3D panels are created not only from PVC, but also from wood, aluminum, gypsum or MDF. There are a huge number of photos of such panels that differ in images, sizes and parameters. All species are environmentally friendly and attractive. Due to the complex structure, the heat-insulating and sound-proofing parameters of the premises increase. Fastening is usually done using a frame, so there is no need to level the wall surface, so a lot of time is not spent on preparing the base.

Basic properties

PVC panels, as well as other varieties of this material, provide an excellent transformation of different interiors. At the same time, they solve numerous problems that cannot be fixed with wallpaper or other finishing materials. These include the following characteristics:

• various irregularities or other problems are hidden on the base base of the wall;
• elements of communication networks are held behind the cover;
• insulation and soundproofing materials are laid in the crate, which increases the thermal insulation parameters of the apartment, and it is also protected from extraneous sounds from the outside;
• By selecting panels that imitate refined, unique materials, a unique and expensive finish is ensured.

Photos of the finished finish from different panels are presented on the Internet, so you can choose the best option for a concert venue. Additionally, the panels are environmentally friendly and fire-resistant, resistant to moisture and easy to install.

Dimensions

Panels can be presented in different dimensions and sizes. The following types and their parameters are distinguished.

Each option has its own characteristics and parameters, which are described above. When choosing, usually not too much attention is paid to the dimensions of the panels, however, this factor is considered quite important, since it affects the ease of transportation and installation of the material, as well as the appearance of the already obtained coating.

Color and pattern

PVC panels, as well as other types of panels created from various materials, are presented in a huge number of colors and textures. This allows you to choose elements that imitate a variety of exquisite and expensive materials.

For each interior and premises, an optimal color scheme is selected or a separate image is created, which will be formed from panels. When choosing a finishing material, many people initially pay attention to its appearance, since the atmosphere created in the room depends on it.

Soft and calm colors and textures are chosen for the bedroom, and marine motifs are great for the bathroom. For the kitchen, it is desirable to choose bright and cheerful colors. However, in addition, when choosing a color and texture, each person who owns the premises should be guided by their preferences.

Thus, wall panels designed for interior decoration are considered an excellent choice for every room. They are presented in a huge number of types, have many advantages and are easy to install. Therefore, the process of their installation is easily implemented on their own.

Video

Options for interior decoration with different types of panels.

Photo with options for how wall panels in interior decoration might look

Examples of interior wall decoration with panels of various materials.

Today, this is the fastest and best option for changing the appearance in the design, while spending a minimum on consumables.

This material is produced from artificial and organic raw materials, which has a huge selection and gives you the opportunity to taste and pocket.

To start installing decorative wall panels in a room, you do not need much time and knowledge, this is done as easy as shelling pears without the help of specialists.

The popularity of the material has reached due to its ease of use and elegant appearance.

You can use the panel together with any other material for wall decoration, this will in no way violate the harmony of the interior, but will only give an elegant look.

Finishing panels have certain requirements, they must be observed when choosing a material:

Choose panels made from organic raw materials that will not cause further damage to your health.

The material must be moisture resistant in order to extend the time of its operation, and delay the next repair.

Strength. The panel you choose must be durable, so you will not damage it during transportation and installation.

Take care of your safety, the panel you choose must withstand temperature fluctuations. This can ensure your safety in the event of a short circuit in the wiring and in places of increased heat.

And one more of the most important points - the panel should not give you any inconvenience during installation.

Functionality of decorative panels

When finishing with decorative panels, you not only gain time, but you can also solve those problems that cannot be solved with wallpaper and painting. Advantages:

• The ability to get rid of uneven walls in the shortest possible time, with a minimum of effort.
• A great opportunity to get rid of pipes and wires by hiding them behind the panel.
• The space behind the panel can be used as room insulation by laying the appropriate material there.
• Budget, artificial panels, it is almost impossible to distinguish from those made from natural materials. Thus, decorating the walls with decorative panels for little money will give the room a kosher and elegant look.

Panel shapes

To this day, panels are produced with the following forms:

Square and rectangular panels.

Reiki. Identical to the material "lining". Has high durability, gives the chance to use in hard-to-reach places. With the help of lining with slats, you can visually increase the space in small rooms.

Sheet panels. Suitable for all types of finishing work. It is the most practical and common material that can easily fit any design style.

What are they made from?

Decorative panels for interior decoration can be made from a variety of materials, in addition, an additional layer is always built on top of the panel as a decor:

Natural wood (specify the type of wood with the manufacturer).

PVC is also polyvinyl chloride. These panels have a monochromatic appearance, but it is possible that a pattern could have been applied to it.

Gypsum vinyl. For manufacturing, gypsum is taken as the basis, which is hidden on both sides with the help of vinyl.

Cork slabs. This is the most common type of panels, which has gained its popularity due to environmentally friendly material, durability and sound insulation.

As you can see, this is a really practical material that will save you a lot of time and make the whole repair process easier for you. For inspiration and the right choice in the future, we recommend that you look at the photos of decorative panels.

Photo design of decorative panels for walls in the interior