Children's playhouse drawing. Do-it-yourself children's wooden house

All your own free time children spend on the street. Fresh air gives them strength, health, joyful and positive emotions. In order for the child to spend as much time as possible in the air, it is necessary to make a children's room for him. wooden house. It will definitely become a favorite place in which the child can hide and equip his own world.

The joint construction of the building will allow you to spend time with your child fun and provocatively. This activity will bring a lot of positive and unforgettable impressions to any boy or girl.

To date, the stores offer a wide selection summer houses for children, but not everyone can afford to buy it. Creating a design with your own hands according to an individual sketch that the child came up with will be the best solution.

Important: before you start building a structure, you should take into account all the wishes of your own child.

It is necessary to issue a hut in bright colors. On the building you can draw your favorite characters from fairy tales and cartoons. The child should also be involved in this process, with the help of which he can show his talents and abilities. The house, which is made by the hands of a child, will become especially valuable for him.

What wooden house can be built for a child

children's house made from various materials that are available to everyone. If after the construction of the house remained Construction Materials, then you can, in general, do not buy anything. You can make children's wooden houses from chipboard, fiberboard, beams, plywood and any other wood materials.

Plywood playhouse for a child

Before you start building, you need to create a drawing, layout or sketch. This will allow you to evaluate the structure, determine where to place the door and windows. It is desirable to arrange it so that it can be seen by parents, so the child will always be in sight.

Most best places, in which a child can retire and dream - these are wooden children's houses, photos of which are presented here.

To create a plywood summer hut, you will need 2-3 sheets of material. The amount of plywood used depends on the size and size of the structure. The material can be used in any thickness. In the store, it is sold with a thickness of 8-12 mm. Windows should be located 60 cm from the floor, and the doorway should be 30 cm higher than the height of the children. But do not forget about the size of the door, since an adult, if necessary, should get into it freely.

The building must be large so that it is spacious and roomy. The roof is installed at a 45-degree angle. Sheets of plywood are knocked together with nails, then window and door openings are cut out. The top is made from the same material as the walls. When the structure is erected, it is necessary to polish it sandpaper or special grinder. This will avoid splinters and skin damage.

The next step is decorating and installing furniture.

Attention: the painting of the structure must be carried out with enamels and varnishes that are safe for the child.

It is desirable to decorate the hut at the request of the child. Colors should be chosen bright, colorful, saturated. For a girl, the design can be painted in a bright pink color, as in the presented photo.

Children's house for a child from wooden boards

Building from wooden planks virtually no wear. Therefore, several generations of children will play in the built hut. At first, a son or daughter will be in charge of it, and after a while - a grandson or granddaughter. For big family it is important to build a large temporary building so that all the guys interfere in it. A video instruction for building a structure from boards can be viewed below.

To build the frame of the building, you will need bars with a cross section of 5 cm. A children's designer - a wooden house will turn out to be strong and durable if its surfaces are treated with deck varnish. For windows and doors, special inserts are made, which are placed in a vertical position. The constructed frame to enhance strength is upholstered with thinner wooden planks, the thickness of which should be more than 2 cm.

The roof structure is made of timber of the same section. It should be installed on already finished walls. Thin boards from 2 cm are stuffed onto the roof.

Warning: To prevent the roof from leaking, the roof must be reinforced with waterproofing.

A plastic cap can be installed over the waterproofing material. After completion of construction, the structure is painted in a pre-selected range of colors and covered with deck varnish. The photo shows a children's facility for boys.

Hut on legs for a child

An interesting house - a hut on legs will help you find yourself in a fairy-tale land. Fairy house can be of various sizes, shapes, colors. The photo shows one of the interesting, creative designs of a children's playhouse.

To build a hut, the legs can be made of wooden bars, metal pipes, stones, and other decorative materials can also be used.

Important: The house is intended primarily for children, so do not make the legs too high.

The height of the legs should not exceed 70 cm. In this case, it is necessary to install a small ladder or several steps. If the legs are created from pipes, then the pillars should be dug into the ground 1/3 of the pipe. The base of the legs must be fixed. For example, pour concrete.

On the upper part each pipe is clogged with a bar of wood, to which the base of the hut is attached. The foundation can be made from boards with a cross section of about 4 cm. Then a structure is built from boards. The resulting frame is sheathed with thin boards, after which the roof is erected. The roof is made from the same materials as the entire structure.

The entrance to the hut on legs is equipped with a comfortable staircase with railings. The railing should be approximately 50 to 70 cm high. Their height is determined by the age and height of the child. The steps should be at least 20 cm so that it is convenient to climb them, and the legs fit completely into them.

A children's wooden house for giving can be supplemented with an original sandbox, horizontal bars for physical exercises, a game complex from game and sports equipment. All elements must be painted in a bright color scheme. Nearby you can break a flower garden or flower bed. The child will look after her and develop her talents and abilities.

Dollhouse for a child

The dream of any child is a beautiful, roomy house for his toys and dolls. Small children love to play with toys, scattering them in every corner. A do-it-yourself dollhouse solves this problem once and for all.

A huge house for dolls the size of a closet can be built by any parent. To do this, you need to show a little imagination and skill. Children's wooden Dollhouse can be made from chipboard or any other similar materials. To create a structure, you will need a jigsaw, glue, chipboard sheets. Anyone can build it, as the design is so easy that even a child can handle it.

Important: a wooden dollhouse must be made from materials that are safe for the child.

The box is very easy to assemble. On the walls, you can cut out small windows and glaze them with thin transparent glass, thick, multi-colored film, or use plastic bottles. Using a flashlight, you can electrify the structure. You can decorate the doll house with drawings, thin boards, stickers, laces, ribbons. In order to make a unique house, you just need to show imagination.

DIY dollhouse

Before starting the construction, it is necessary to draw a plan or sketch of the future structure, as well as consider where the windows, doors and stairs will be located. Should be considered the smallest details and the desires of your own child.

To create a multi-storey closet for toys and dolls, you cannot do without a detailed drawing. It is easier to redo the drawing, in case of changes, than to disassemble the constructed structure.

Important: The size of the house must match the height of the dolls and the dimensions of the toy furniture.

The house must have windows, doorways, stairs, bathroom, light. When wiring a house, it is necessary to consider the insulation of all cables so that they do not pose a danger.

Warning: Do not use lamps that get hot.

If electrical installation work is difficult, then you can do without lighting. Wooden children's houses for dolls decorated with colored paper, wallpaper, pieces of multi-colored fabrics. Maximum realism can be achieved with the help of curtains on the windows, paintings on the walls, rugs. Surround the finished building should be a fence, as well as build a garage, veranda, swimming pool.

After the completion of construction work, it is important to make sure that screws, nails and other sharp elements do not stick out of it. And then the wooden structure for dolls will become a favorite toy for the child.

Perhaps it is difficult to meet a child who would not dream of his own little house. It can be anything - a textile tent, a wooden hut, a plastic house, and even a hut or wigwam. And it doesn't matter where they are installed similar designs- on the suburban area, or in an ordinary apartment - it is important that this is a personal place for the baby to play and spend free time. Such a space is very necessary for children, anyone will tell you about it. child psychologist, especially if the house does not provide a separate children's room. The article will discuss how to make a children's house with your own hands.

It is important to satisfy the need for a personal “corner”, because only this will lead to the full development of the growing personality. Here the child should feel like a master, he himself arranges furniture or brings toys, cleans up inside, brings cleanliness and beauty. This helps to foster responsibility and also makes the baby feel safe. In addition, it is also perfect place for educational games.

Children's house photo

That is, according to experts, any child needs a secluded place where he could feel confident, protected, could play, or be creative, or just relax from everything and everyone. Of course, today manufacturers of children's toys offer the most variety of options children's playhouses or tents. But it’s so nice to make a house on your own, all the more you can involve the future owner of this property in this work.

It remains only to create a project for a children's house and choose the materials from which the idea will be implemented.

Variety of children's playhouses

Wooden children's houses

  • To date, the choice of materials is very large. Of course, wood remains in the first place. It is a natural product, environmentally safe and readily available. Enough to work with wood simple tools- hammer, saw, screws and nails.
  • Of course, if you want to build real masterpiece, you will need a more serious set of equipment, but in principle there is nothing complicated here and you can always do it yourself. This category also includes products such as MDF, WPV, plywood, lining and other wood-based materials. They can be combined with each other, or used independently. It all depends on where the structure is planned to be installed and how it will be used.

House made of cardboard or cardboard box

  • Easy and simple to build a house out of cardboard or cardboard box even kids can do it. The basis can be packaging from household appliances, for example, from a refrigerator, washing machine, TV, etc. It is advisable to take thick and dense cardboard, then its strength will be higher. All structural elements- doors, windows and others are easily cut with a regular clerical knife and scissors. To do this procedure more accurately, it is advisable to first draw the borders.

  • The roof is made from glued pieces of cardboard or one large piece, depending on the design of the house. You can glue the parts together with PVA glue or adhesive tape (it is especially important to strengthen the joints in this way so that the product does not quickly become unusable). After the design is assembled, it should be brightly and beautifully decorated. This is easy to do with ordinary gouache and a brush. If there are pieces of wallpaper left in the house, then you can beautifully paste over the walls and roof with this material.
  • It is recommended to entrust the child to decorate the inner and outer parts so that he feels like a master here. True, such a structure will not differ in durability. Therefore, such a house is best kept indoors (in an apartment or house), and if used outdoors, then only in dry, calm weather. This rule applies to the next category of materials - textiles.

Fabric children's house

  • From fabric, you can build a variety of shapes for children's houses. Most simple view is a hut or tent. To create them, it is enough to come up with a base (frame) and cover it with a piece of fabric, an old bedspread or a sheet. This structure can be both stationary and collapsible, it all depends on the imagination of the master.
  • Ideal for frame plastic pipes(PVC), which are used for plumbing, or thin blocks of wood. It is quite easy to buy these products in hardware store, their price is low. In cases of creation wooden frame, all parts should be sanded and painted. This procedure will prevent the appearance of splinters and scratches in the child.

  • It will not take much effort to make a hut, it is enough to tie 3-5 guides together by the tops (from one end), and install the structure on a solid support with the free end, spreading the guides in different directions. Then fasten fabric to them to form walls. Since the floor is not provided for in the design, it is necessary to lay a thick carpet so that children do not catch a cold when playing on the cold floor. In the summer, such a children's house can be taken out into the garden. This is a fairly mobile design that the child can move at will.
  • Another option to simply build a hut is to take a gymnastic hoop as a basis or build a wire frame. Such a product should be fixed to the ceiling, or, if there is such an opportunity on the street, by a tree branch. Here it is important to cut the material correctly; with the proper approach, it is easy to make windows and doors from separate pieces of fabric. If you can’t build a frame, then you can take an ordinary table as a basis and tighten it with a cloth, like a cover, leave a place for entry, that is, make a folding canopy and the playhouse is ready. Children will be happy to spend time in such a place, especially if the table is large and there is room to turn around.

Drywall children's house

  • Another material that is successfully used in the construction of structures of varying complexity is drywall. Such a house can become an adornment of any apartment, the main thing is to create a project so that it fits well into the interior. Used as a frame aluminum profiles, and wooden bars. screw drywall sheets to the base follows with the help of self-tapping screws and a screwdriver, it is important to ensure that the sharp ends of the hardware do not come out inside the structure, otherwise the child may accidentally get hurt.

  • If a second floor and a staircase are planned in the house, then the floors should be made as strong as possible, and the steps are best done from boards, since drywall easily breaks under weight. A drywall children's house will already look like a whole room, it is allowed to put real furniture here and even hold the light. That's just on the street such a design is better not to use. Especially if the drywall is not moisture resistant and is not additionally untreated. Otherwise, all beauty will disappear literally in one season and the next one will have to build a new cozy house, and this is a waste of effort, time and money.
  • These materials are the most common for the construction of children's playhouses, but this does not mean that this is the only possible options. Some craftsmen manage to create structures from any improvised means, for example, from plastic bottles or build a house from sandbags. In general, there would be a desire, but there will be opportunities.

DIY wooden children's house

Since it is wood structures that are the most durable, durable and safe, it is worth considering in more detail the stages of building wooden houses, and learning about the necessary set of materials and tools.

Choosing a place to build a children's house

  • So, first of all, you should decide on a place for the future structure. This is especially important if a stationary house is planned, which will be located on one site for a long time. The dream of every child is to have a tree house, but if there is no way to completely secure this option, then it is better to avoid such a construction. Children cannot sit still, they need to move, and outdoor games at high altitude can lead to injuries, which is why it is recommended to stop at a hut built on the ground. Moreover, it is this option that can be easily supplemented with a wide variety of designs, including a sandbox, a swing and even a slide.

  • On the personal plot the location of the future house should be indicated. It is best if it is a quiet place where there is a slight shade from the midday sun. It is also important to keep in mind that around it is necessary to allocate additional territory for games. Such a place should not be occupied by beds or other household needs, but completely given over to children for games. This must be taken into account, first of all, not for the children themselves, but for the peace of mind of their parents, because noisy games can lead to the fact that precious plantings will simply be destroyed.

Foundation and floor preparation

  • The dimensions of the building are chosen arbitrarily, for a small children's house, a length and width of 140-160 cm is sufficient, and a height of about 1-1.5 meters. The first thing to do is prepare the foundation. The base can be a platform covered with rubble, or well-packed sand and even ordinary earth.
  • There are several options for laying floor boards. You can remove the top layer of turf, fill the formed place with rubble, level and lay the support bars on the prepared site. Another option assumes that only the corners of the building will be on special support blocks, for example, made of cellular concrete. Such supports are laid on prepared sand cushions. That is, having marked the corners of the future building, a recess of 30-50 cm is dug in each of them. All the earth is pulled out of the pits, and sand is poured into the vacated space, which is carefully compacted. To most accurately mark the corners, you can put together the main floor frame in advance.

  • Blocks are placed on the prepared sand layers at the same level. Horizontalness should be measured using a level and floor frame timber. Further, it is important to take care of the waterproofing layer, this will help the house to stand for more than one season in integrity and safety. As an insulator, roofing felt or roofing felt, as well as more expensive materials, including various mastics, are used. In addition, you can use the option in which there is free space under the floor to blow through the boards.
  • The next step is to mount the frame. Blocks of the required length are laid on the foundation blocks, or on the support bars (if the option with a rammed platform was chosen), and connected into a rectangular box using corners and self-tapping screws. Metal corners will make the structure durable, but for greater reliability, additional transverse bars should be installed. If planned big house hic, then there will be 3-5 such struts, if the building is of modest size, then one more board in the middle is enough.

  • Further, on the frame prepared in this way, the floor is laid. For the floor, you can use separate boards, wooden panels or sheets of chipboard, MDF or HDF. The main thing is that they can safely withstand the weight of not only a child, but also an adult. It is recommended to apply floorboard with parameters: length 6 m, width 13.5 cm and thickness 28 mm. As a rule, 4 boards are enough for floor installation.
  • Another rule in the construction of any structures made of wood is to protect the surface of the wood from moisture, as well as from damage by insects. And the orphanage will not be an exception here. It is advisable to impregnate the boards on both sides special composition, which contains both moisture-repellent components and antiseptics.

Installation of walls and roof

  • When the floor is sorted out, you can start creating walls. To mount this element, you should create a frame of bars, which will later be sheathed with clapboard or shields. The main thing is not to forget about the doors and windows. First of all, a bar is installed in every corner of the future children's house. For these purposes, you can choose products with a section of 60x40 mm, a length of 3 m is enough. Each element is cut into three parts, 1 m high, or into two parts 1.5 m each. Next, bars are installed under windows and doors.

  • To fix the main bar, you should nail it to the floor, but in such a way that in the future these nails can be easily pulled out. This is due to the fact that the most durable fastening of building parts can only be done on special mounting corners, which are installed a little later. Between the rafters (approximately at half the height), be sure to install additional spacers, which will also serve as a fastening system. It is unforgettable that the beams are connected from above by a frame, which will be the basis for the roof. When the base for the walls is ready, the nails are pulled out one by one and metal corners are mounted in their place. It is important to fix all corners and butt elements with corner fasteners, only then the house will really be strong.
  • Bars that are installed horizontally mark windows and doors. We need to calculate their height in advance. The calculation is carried out from the width of the sheathing boards, such parameters should be laid down so that when sheathing does not have to cut the board along its width or close the floor of the window. That is, we consider how much full boards fit into the remaining opening from above and below and at such a height and fix the horizontal struts.
  • And the last thing to do to complete the frame is to put the bars for the roof. To do this, we knock down two bars between each other at an angle (in the form of an unfinished triangle, the base of which will be one of the walls), and we strengthen the free ends on the upper bars of the walls. There can be from 2 to 4 such triangles. Without fail, one is installed on opposite walls of the house, opposite each other, and one or two can be installed between them, it all depends on the size of the structure. Also, these bars must be fixed with corners.

Drawing of a children's house

Sheathing of a children's playhouse and its design

  • Now you should start covering the building. To create walls, you can use lining, shields or boards. The clapboard option suggests faster sheathing, since the elements do not have to be adjusted, and they are quite easily connected to each other. The roof is closing edged boards and roofing material, tile or ondulin can be laid on top, everything depends on the builders' ability.

  • Since we have a children's house in front of us, it is advisable to decorate it in bright colours. This can be done with children. In addition, windows can additionally decorate carved architraves, which are commercially available, or make them yourself. Inside the building, it is recommended to install benches and a table, but, of course, this is far from the only option for decorating the interior. A porch is often made in front of the house, which was either originally included in the plan, or it can be easily completed separately.
  • It is important that the house for children is completely safe. This concerns its stability and reliability of the connection of elements to each other. Also, so that during the game the kids do not get hurt and scratched, all boards must be jointed and well protected with a layer of paint, varnish or stain. Metal corners, screws and nails must be properly sealed so that they do not bulge or stick out.

Today, choosing an option for building a playhouse for children is not difficult, because there are a lot of photos and videos on the Internet on this topic. The approximate cost of the building is 5000-15000 rubles, this cost includes the purchase of boards, hardware, paints and other materials. But often, many parents can build a children's house for their child's games with their own hands for free, using only improvised materials.

play house video

Do not deny your child such pleasure as a small house. This will help the child to fully develop and feel happier. If it is not possible to arrange a place for games on the street, then this can always be done right in the apartment. Do not forget to please the children, and they will certainly please you with their successes.

Remember your childhood. Remember how you played adulthood in which you always had your own house? Let in fact it was just a small space under the table, curtained from the whole world with an old bedspread. It seems like it all happened so recently. And how many years have passed since then! Now you already have your children, who also dream of their own tiny corner. Make them happy: build a wooden children's house for them with your own hands. Try to make this work collaborative. After all, common causes and interests bring together and help in communication.

The house that you and I are going to build should be extremely simple. It is important. You can make it beautiful inside and out, if you show imagination, work not only with your hands, but also with your head. In short, your child and you have a front of joint work. For a baby, this will really be a wonderful rehearsal for adulthood.

Children love to play as adults. For this purpose, they simply need to have their own space, which they can equip to their liking in order to put their toys there.

Determine the need for materials

If the age of the child is from 2 to 6 years, then he does not need a big house. We have to build a building with a modest size, having a square of 1.7x1.7 meters at the base and about 2.5 meters in height.

The need for materials is as follows:

  • Chipboard 2x1.7 m - 4 sheets;
  • For walls and roofs, 13 bars 2.5 meters long and 2.5 x 2.5 cm are needed. Of the 13, only 8 bars need to be sharpened at one end;
  • For floor supports, take 8 bars 35 cm long and 2.5 x 2.5 cm in section;
  • To fasten the floor horizontally, you will need 4 boards 2 meters long, with a section of 15x5 cm;
  • We will lay the floor with boards (13 pieces) 2 meters long and 15x5 cm in section;
  • We will cover the roof with plywood and any roofing material;
  • From consumable you need self-tapping screws, metal corners, paint and brushes.

All this must be prepared before starting work so that it is at hand. Let the child learn to work in an organized and harmonious manner from childhood.

Building materials for a small children's house should be prepared before construction begins. There is no need to make a drawing for it: it is a very simple and easy construction

We select and mark a place, we make flooring

Yes, the child wants to have his own corner for games, but it is simply dangerous to lose sight of him at this age. Is there anything that can happen to a baby? Therefore, it is necessary to build a playhouse for children in the country in such a place that this building can be clearly seen from the kitchen window, for example. So mom, while preparing dinner, will be able to look after the youngest member of the family.

Like this little house enough to make a child happy. Approximately such a structure we suggest you build for a baby aged 2 to 6 years

We have to do the markup. We take pegs and twine, mark out a plot, the size of which is 2x2 meters. The selected area should be well compacted, and its surface should be made even. In the corners of the resulting site we dig holes 20 cm deep. We place the bars in them so that they are 15 cm above the ground.

Exactly the same recesses must be made in the middle of each of the four sides of the site. We also place bars in them and strengthen them. The structure is small and it is not necessary to use a solution in this case. We got eight supports: one at the four corners of the site and one on each of the four sides.

Once again, measure the height of the supports using a gauge. The quality of the entire building depends on how even the base of the floor of the house turns out. Distortions are of no use to us. We nail four boards to the supports so that a box opens at the top. On it, the boards will be laid tightly one to the other. We attach the boards with screws and get a finished flooring for the floor.

Particular attention should be paid to initial stage work, because distortions at first can negate all the efforts of the builder

We build the walls of the building

To build walls, we need all four sheets of chipboard ( chipboard) and 8 bars with pointed ends. To each sheet of chipboard, it is necessary to attach a beam with screws on both sides. In this case, the blunt ends of the bars should be flush with the top chipboard edge, and the pointed ones will protrude half a meter. Everyone chipboard sheet with two bars on the sides forms one wall of the house. Let be end wall will be deaf, and in the one opposite it, you can cut out the door. Side walls can be made with windows. Two or one window will be in your house, you decide.

Choose the shape of the openings for windows and doors yourself. But it’s better to look into children’s books and make a choice based on pictures. Kids love fairy tales, let the child's house look as fabulous as possible. There should be a lot of sun in the house, but you should not forget about the shade on a hot day either. Already finished walls with a sledgehammer are installed so that the surface of the chipboard is in close contact with the flooring. Don't forget to check the vertical orientation of the walls. Between themselves, the walls must be fastened with corners and screws. There should be no gaps in the building!

We build a reliable roof

The roof of the house can be made high or flat. It all depends on how you imagine this building. We will do this: take 4 beams, the edges of which are not pointed, and cut their ends at 45 degrees. Fasten two beams together with screws so that inner corner between them was 90 degrees. Both corner structures are constituent parts roof bases. From the inside, each of the corners should be fastened metal corners on screws.

It does not matter if there was no plywood on the farm. For the crate, you can use thin slats, the remains of a laminate and other similar materials.

One of the corner structures must be attached to the front wall of the house. To close the free space between the roof of the house and the wall, you need to outline a triangle. It is cut with a hacksaw. We do the same with the opposite wall of the building. Now the roof supports can be fastened together with a transverse beam. The finished frame remains to be attached to the walls with metal corners.

To cover the roof, plywood is needed. If it is not there, you can use everything that remains from the construction and repair in the house. Suitable, for example, slats, laminate, etc. As a roofing material, you can also use the remains of ondulin, colored slate, profiled sheet or tiles. It is even better if there are multi-colored pieces of the same type of roofing material. Get a real "gingerbread house". Remained finishing work and painting. So childish playhouse with your own hands you can build in one day. And this does not require special skills of the builder.

The construction of a children's house should be taken seriously. If you manage to accurately complete all the stages of work, then you and large objects will be on the shoulder.

Option # 2 - a house for older children

Older children need not only a place to play, they also need all kinds of devices and structures with which to play. This video will tell you how to build a more complex children's house for children over 6 years old.

Option # 3 - a two-story house made of willow and reeds

A house for children can be built from various improvised materials. In this case, the builders had the opportunity to use willow trees for these purposes, from the thickets of which the local reservoir was freed, as well as reeds harvested in advance. Trunks of cut trees can be used to build the first floor of the house. To do this, they are cut into logs 15 cm long.

The first floor of the willow house

For the frame, old 10x10cm beams were used, which made it possible to make the first floor geometrically accurate. Since it forms the basis of the structure, this option can be considered optimal. We fix the frame of the future window and begin to lay the chocks on cement mortar. The solution requires sand (1 part), clay (2 parts), cement (1 part). We add water so that the mass is not liquid, but elastic.

Laying must be done carefully. To do this, it is necessary that the solution has not a liquid, but an elastic consistency. All gaps between chocks must be carefully filled

In order for the frame and masonry of logs to get a strong hitch, we will use nails (20cm). They must be driven in pairs into the frame of the building, alternating them every 2-3 rows. For doorway put another beam. We make sure that all the gaps between the chocks on both sides of the wall are completely filled with mortar. The walls are ready.

In order for the frame and masonry to be securely fastened to each other, you can use not only nails, but also long metal pins

Now we will build the floor. To do this, you need churbachki 10 cm long. Inside the structure, we take out the soil 15 cm deep. Pour five centimeters of sand into the bottom of the formed pit. On it very tightly, carefully selecting, we lay the chocks. With help wide board and we ram them with a hammer.

The construction of such a floor from wooden blocks is not an easy task, but the result is worth the effort. After all, your children will play in the house

We fill the existing cracks with sand, after which we should pour water on the floor under pressure so that the sand fills the cracks and securely fixes the logs. The gaps are filled with a solution of sand and cement. We leave the floor to dry, after which it is necessary to rinse it well so that the color of the wood returns.

The second floor of the willow house

If the wood for the first floor was cut down before the start of sap flow, then for the second floor, willows are needed when the sap is already running in them. It is this kind of wood that can be very easily freed from the bark. It is necessary to attach logs to the frame with the help of two-hundredth nails. Between themselves, they should also be knocked down in the most dense places. Do not forget about the door and window openings. To make a hipped roof, you need four even logs from which you can build rafters. They are nailed along the edges of the house, and fixed with self-tapping screws at the intersection.

Willow trunks during the sokogon period are very easily cleaned of bark. It is from such peeled branches and trunks that the second floor will be built

We take young reeds for the roof. It should grow in the spring, and it should be harvested in the winter. It is better to mow reeds during a period when there is little snow, and the shore and surface of the reservoir are covered with ice. The scythe glides over the ice, so the reeds will be cut evenly and look neat.

When laying a roof made of reed, it is fixed by tightening two rails with self-tapping screws. First, we place a crate on the rafters, we lay reeds of such thickness as planned on it. Then we lay the rail on top of the reeds and tighten it with the crate with long self-tapping screws. We do the same with all sides of the roof. The top of the structure is crowned with a cap, which is pressed against the rafters with the help of a wire.

This is what it looks like four pitched roof covered with reeds. If everything is done slowly, then the result of the work will please everyone.

frame can be covered water-based paint. Hammocks are attached to a specially dug large log. However, you can also use an old tree, the trunk of which is still quite reliable. The video will tell you in detail how to make a wooden children's house from the materials that are around us.

If the child has nowhere to play and he is bored in the country, a children's house made of wood can solve the problem. Children are much less demanding than adults. Even the simplest house - no more than a hut made of wooden slats covered with fabric - can become the most beautiful place for them to play. What to say more complex structures- located on a tree, similar to wonderful forest huts, with a built-in slide or even imitating a pirate frigate.

Content of this article:

Why a tree: pros and cons

Of course, in order to make a house for a child, you can use a variety of materials - from plastic to real brick. But the tree has a number of specific advantages, some of which are devoid of other materials. This is:

In addition, the tree, purely in meaning, is best suited for the implementation of some ideas. For example, it would be strange to make a fairy-tale hut out of plastic, but it would not be possible to assemble an alien ship out of brick at all. Also, if you have a dacha and connections with neighbors, you can find a tree at a low price.

There are also cons:
  • The need for care. Every year the house will have to be painted or varnished again so that nothing happens to it.
  • The need for careful handling. So that the child does not have a chance to splinter his hand, you need to carefully check all the boards, sand them if necessary.

A tree that is not cared for quickly begins to rot or dry out. But if you are ready to process it every spring, it will serve for a long time.

To further increase this period, you can make a house from one of the most common breeds in construction:
  • Pine. Among conifers is the best one you can choose. She has a gentle golden color, slight resinous smell. The first years it will not need processing, because due to the high resin content in the wood it does not rot. May have a positive effect on respiratory organs child.
  • Oak or beech. Wood of a dark, noble shade, which, due to tannins, does not absorb moisture well and, therefore, resists well to the external environment. Flexible, workable - it can be given any shape if it is properly bent during shrinkage.

You can still use an apple tree, but first you need to make sure that its wood is completely dry - during drying, it cracks, changes shape. It does not make sense to process it until it is completely dry.

You should not buy wood for the house that does not meet the standards - this is unsafe, and will also greatly affect its appearance.

You do not need to take boards that have:
  • cracks- this means that they are overdried, they will quickly crack further;
  • green spots- this is mold or rot, which means that the boards will quickly fail;
  • protruding knots- it's ugly, and the child can catch on during the game;
  • cavities filled with resin- it will have to be pumped out, otherwise the board will be fragile.

Ideally, the wood should be of a uniform color, without admixture of shades, without large knots, without spots, without minor defects. Then it can be used for a house without fear.

What are wooden houses?

Children's houses can be very different from each other - several different categories can be distinguished at once.

The first - by number of storeys:
  • single tier. It is easier to make such a design, since there is no need to calculate whether the pillars will withstand the second tier, whether it will be dangerous for the child to be on it. But they usually look less impressive, you can’t attach a slide to them, you can’t satisfy the endless love of children for lasagna. However, if you approach the design correctly, the result can still be worthy of attention.
  • Bunk. Such houses look more interesting, plus you can attach a slide, ladder or even a rope to them, along which the kids can go down. They require accuracy, accuracy - if you don’t calculate, the pillars simply won’t withstand, the second tier will collapse, and it’s good if no one is on it at that moment.

You can, of course, show creativity and build a three-story house for children, but usually such an idea is abandoned - it is costly in terms of materials, labor, and it is more difficult to calculate.

The second is by design:
  • open. These are, in fact, small gazebos that are relevant in the southern regions, where in the summer, indoors, children will suffer too much from the heat. They are made either in the form of a hut, or in the form of columns that support the roof, and they themselves are connected by a wooden lattice. As a result, there is a shelter, but it is cozy and cool. And if you want privacy, the child can always hang a cloth between the posts.
  • semi-open. Such houses have one or two walls, and the rest are posts with bars, like in a gazebo. On the one hand, they are not too stuffy, on the other hand, the child will not suffer from the rain if he goes, and it is more convenient for him to hide from the sun.
  • Closed. If you make two windows and keep them open, it will even be possible to be inside in the heat - especially if you place the house under the trees, in the shade. Most of the structures belong to this variety - castles, huts, ships, houses in a certain style.

Third - by placement:
  • Outdoors. In the courtyard of a private house or in the country, so that the child can spend more time outside - this is good for health.
  • Inside. Usually in an apartment, for those who do not have a summer house or a private house. Such a house cannot be two-tiered, does not require laying the foundation, but can become an excellent playground.

Fourth - for mobility:
  • Mobile. These are structures that can be assembled and moved to another place if desired. Usually these include plastic houses, but huts on wooden slats can also be easily rearranged.
  • Stationary. Standing in one place for several years - most of wood structures is one of them.

What will be the house that you build depends solely on your imagination and the tastes of the child.

Advice

If you are going to build a structure in a country house where you spend only weekends, you better fit a mobile outdoor house that you can assemble and put away during your absence. And if you live in a private house, then it makes more sense to make a stationary one - a child can play in it even in winter.

How to build a house?

You need to approach the construction carefully, without haste. There is no hurry, but how much effort you put in, how much time you spend on calculations, how well you choose the material depends on what quality the result will be.

Preliminary work

In order for the house to serve for a long time, you need to lay the foundation from the very beginning. There are rules for this:

  • Without a drawing - nowhere. Finished drawing You can find it online, or you can do it yourself. Imagine what your dream design looks like. What size should it be so that the child is comfortable, how to achieve this. The easiest way is to make a drawing of an ordinary wooden box - and that's what you can do to start. Then, once you understand the principle, you can do something more complex.
  • Height. In order for the child to be comfortable, the design must be thirty centimeters higher than his height so that he can stand up. In fact, this rule is inaccurate - children grow quickly, ceilings will soon interfere. Therefore, it is better to take a universal height of sixty meters - although if you suspect that a teenager will not get tired of the house, then you can take two.

  • Width with length. The area near the house should be such that the child can turn around normally in it. Usually it is one and a half by one and a half - in such an area you can seat toys, put a table, turn around with board games. But less is possible.
  • Accommodation. The right place for the house is in the shade, but not too close to the trees, otherwise they may start to hurt it. It is also desirable that you feel comfortable looking after the playing children from anywhere in the house and garden, and that no large-scale changes are planned in its place.
  • Foundation site. Must be clean and even. If this is not in the garden, you can make it yourself by removing the top layer of soil, leveling it with the same shovel.

And, of course, you need to stock up on materials.

For the most a simple hut This:
  • several (from five) rails of the same length;
  • strong twine;
  • fabric measuring about two by one and a half meters plus nails.

For a single-tier design, you will, of course, need more:

You will also need nails, screws, mounting brackets along with tools with which they can be fixed.

And the rest - only accuracy, along with readiness, if anything, to redo.

Direct construction

To make a hut - and they haven’t come up with anything easier yet - it doesn’t take so much effort:
  • slats are dug into the ground in a circle with a radius of about a meter;
  • the ends of the slats are tied together with twine;
  • the fabric is attached from above - first to one rail with the help of nails, then to the next, and so on until two adjacent rails remain.

At the top of the hut there is a hole, like an Indian wigwam, which provides ventilation. Through the last piece of fabric that was not fastened, you can climb inside and close it - for example, with Velcro. It is easy to breathe inside, you can read, relax or play the inhabitants of a desert island.

It is somewhat more difficult with a real single-tier structure - it will not work to build it in half an hour. Although you also need to act consistently:

  • fold the base bars into a square, fasten them with corners, plus attach a separate bar in the middle with them;
  • dig four recesses under the foundation blocks in the chosen place and lay them;
  • put a frame on top, sheathe it with boards to make a floor;
  • attach wall beams to the frame - four at the corners, two each where there will be windows and doors, one on the remaining free wall, fix the frame from above, similar to the foundation;
  • make rafters - connect two bars each with special corners at an acute angle, attach them to the wall frame;
  • sheathe everything with shield sheets - from the walls to the roof;
  • hang a pre-prepared door and windows.

Of course, in the details, the process is much more complicated, but its main stages look exactly like this. The result is a simple house that needs to be furnished to make it look good.

Registration

The design of the children's house must be approached with imagination. It should be bright, interesting even in appearance, but at the same time not devoid of taste.

Ready Ideas

Of course, it is not necessary to take what someone has already come up with before you. But you can always use other people's ideas for inspiration. So, a children's wooden house can look very different.

The first solution is like a fairy tale hut.

  • External design. The walls are finished in such a way that they seem to be made of logs (you can use imitation for this). The door is squat, also made of logs, but vertical. The roof is gabled, with a carved visor and a platband in the form of a cockerel. The shutters are carved, if desired, they can be closed. Colors - natural wood, bright red , bright yellow .
  • Interior decoration . The walls are made of the same logs, the floor is wooden, on it is a homespun (at least in appearance) carpet - it is convenient for children to play on it softly. In the corner there is a little whitewashed brick stove, in which, of course, you can’t really bake anything, but you can perfectly play the same Kolobok.
  • Interior design. At the walls of the bench - they sit on them. In the middle of the table - you can put on it board games, constructor, sandwiches brought from big house. There is a traditional chest in the corner, there are toys in it, and a lock can be hung on the lid. Hang bundles of herbs, beads, dried flowers under the ceiling. A Russian rag or straw doll will look good.

Of course, children will quickly turn a thoughtful design into something of their own - they will play with a doll, they will spill something on the table, they will fill up the carpet with toys - but the general atmosphere will still be traced.

The second is the gazebo of the Sultan.

  • External design. There are no walls - instead of them there are four pillars, a woven wooden mesh that looks intricate, interesting (instead of a wooden one, you can take a metal one). The roof is pointed, if skill is enough - in the form of an elegant onion. Arch door instead. It will be beautiful if grapes or another similar plant weaves along the grid. Colors - wood, red, blue, white, gold.
  • Interior decoration. The floor is wooden, no carpet. A fabric is fixed under the ceiling - if it is hot or you want to hide, it can be stretched by closing the grid.
  • Interior design. Lots of colorful pillows on the floor, a low table that not only plays with the entourage, but is also comfortable for children. An intricate iron candlestick with a real candle - of course, light only in the presence of adults. A dream catcher or wind chime hangs from the ceiling.

If children do not have allergies, you can put a stand for incense sticks - in the fresh air, their smell will not be suffocating, but pleasant.

The third is a pirate ship.
  • External design. The walls repeat the shape of a pirate ship, instead of a roof, in fact, a deck. You can make an ordinary door, or you can - round manhole in the roof, like on a real ship. Then the child will need to climb the rope ladder to the deck and go down through the hatch. Such exercises are useful for coordination, but if the child is clumsy, it is better to refuse them.
  • Interior decoration. The floor is made of wood, the walls too, round portholes are not curtained with anything. On the walls there are benches or hammocks where you can lie down, read, swing. You can put a table, but you can do without it.
  • Interior design. Necessarily - accessories of the marine theme. Encyclopedia with ships. Rope on which you can learn to knit knots. A compass that can be used to determine directions. You can even give everyone who goes to the ship an eye patch to make it more convenient to play pirates.

The fourth is a European-style house.
  • External design. Paint the walls, make the door framed, beautiful. The windows are simple, with rectangular shutters. In front of the entrance, you can set up flower beds that children can care for if they want. Colors are pastel, with bright accents on the roof and doors.
  • Interior decoration. Paste the walls with simple wallpaper, leave the floor wooden, whitewash the ceiling. You can put a carpet to make it more comfortable.
  • Interior design. Necessarily a vase with flowers, a small sofa child size. You can make an imitation of a fireplace, you can put a bookcase. Plush toys, a table with a set for tea drinking. Nothing fancy, nothing flashy.

This decision is suitable only for calm introverted children - this should be taken into account. It’s not interesting to play active games in such a house, but it’s quite enough to play something economic.

Advice

When building a house, be sure to use the help of a child. Discuss with him what he wants to see. Invite to participate in the creation of a sketch. Even if the baby is only four years old, it will be he who will use the result, which means that his opinion is also important.

It is simply necessary to take children in the country, because adults are absorbed in the garden or vegetable garden, and children are left without attention at this time. A playhouse on the playground will take the child's attention for a long time, especially if it looks like a fairy-tale palace or a space rocket - there is no limit to fantasy. It is easy to build a wooden hut with your own hands - look at the photo gallery, with what imagination and love some parents build playhouses. Everything that their kids dreamed about is embodied and built. Read this article to the end, then even the most complex and fantastic project of a playhouse will be up to you.

Step into a fairy tale: a wooden hut

Wood - natural natural material, which does not cause allergic reactions in children and adults. Children's houses are best made from wood, which does not heat up in the sun like metal or plastic; does not release phenols into the air when heated by sunlight, as happens with some types of plastics. wooden logs or boards are easy to purchase within walking distance from the location of the suburban area.

Wood of different species has a unique texture pattern, which can be preserved by covering the wooden houses with a layer of protective varnish. The tree is easily painted with any paint, so the wooden hut for children's games can be painted in bright colors, giving the house a fabulous flavor.

Play complex for children with a house

Which place to choose for a play hut

A playhouse for a child should be built in a place that parents can control from anywhere in the summer cottage.

You should not densely plant a wooden hut with shrubs and trees - frequent watering of green spaces planted next to the house can increase soil moisture, which causes the development of mold foci and fungal infections of wooden parts. It is worth placing a playground with a hut away from fountains, pools and ponds.

Advice! The house should be located away from the barbecue or barbecue area - proximity open fire, especially in windy weather, can cause a fire in the children's house. The wooden parts of the playhouse for children must be treated with special fire-fighting agents.

House project for a children's playground

The choice of the project of the house should correspond to the main ideas that the parents decided to implement on their own.

  • The dimensions of the building depend on the actual availability of free space on the site allotted for the construction of a children's hut.
  • The presence of a foundation. When building a foundation for a playhouse made of wood, the life of the building increases significantly. Wooden parts, not in contact with wet ground, are not covered with mold and rot, the possibility of developing fungal infections of wood is excluded.
  • Mobility - the playhouse can be collapsible. In this case, you can transfer the game building to different areas.
  • Type of construction - the house can be built open or closed type. In a closed house, a doorway and at least two window openings must be provided. The open-type hut resembles a gazebo with a fencing belt along the bottom, the roof of which is supported by four vertical bars.

The project of a children's house for a summer residence

Roof design - it is worth providing a pitched roof on the playhouse for kids, then children will not be able to climb on it, thus, it is possible to prevent injuries and falls. If the building is of a stationary type, it will stand on the site in winter, the pitched roof will not allow accumulation a large number snow. In the spring, the snow begins to melt, moisture seeps inside wooden structures causing premature failure.

Advice! Finishing internal walls- the wall surfaces of wooden houses should be finished to smoothness, otherwise the child can easily slip his hands.

The height of the openings is provided in the following dimensions:

  • window openings - from 55 cm from the surface of the floor covering.
  • doorways - at least 25 cm higher than the height of the child.

Types of wooden houses (using different materials)

Advice! Wooden houses for a children's playground can be made from different materials: boards, plywood, logs.

Details of plywood houses are sawn from a thick sheet of waterproof plywood in full size. Strengthening of cut parts is carried out according to the erected frame from wooden beams using self-tapping screws. Installation of plywood houses does not take much time. The support for the structure can be a pre-built foundation or thick timber, laid in the ground as a support belt.

Similarly, the assembly of the hut from the boards is performed. All parts must be pre-treated with antiseptic substances, preventing premature decay. Boards with a thickness of at least 40 cm are cut according to the template. Then a frame of wooden beams is erected. The frame is tied with boards, be sure to arrange the necessary openings for the entrance of the kids and the internal lighting of the hut.

Two-story wooden house

The roof is best to arrange a gable, high. With this shape of the roof, the hut takes on a fabulous look. The roof can be made of boards, covering it with siding or rolls to protect it from precipitation. roofing materials. amazing view acquires high roof, trimmed with piece roofing tiles. The roof area on the playhouse is small, so we can not talk about the high cost of decorating a children's hut.

The most exotic houses for kids are made from logs, the option from birch trunks with bark looks very interesting. When building a log hut, you need to have some skills in working with round log- the house is assembled according to a special technology (mounting in grooves along the notches). The interior decoration of the log house can be provided with or without wall cladding. Anyway, log cabin- most durable option playhouse, especially if there is a foundation support.

If an old tree grows on the site that is planned to be destroyed, a children's playhouse can be built on the trunk of this tree. In order for the child to get inside the hut, it is worth building a safe staircase with railings.

Any version of the play hut, built with your own hands, will decorate the site and cause a lot of delight among the kids. Invite them to participate in the discussion of the design of the house, and also assign the children simple construction works, for example - painting the shutters or the outer walls of the house. In any case, the child will be proud of the wonderful playground, which he equipped with his parents.

Playhouse for children: video

Children's house in the country: photo




















Loading...
Top