To offer the consumer wide range of floor coverings from natural wood, manufacturers use lumber made from the following varieties and species of trees.
Light wood types
The light varieties of natural wood include:
Oak is a traditional breed with high aesthetic properties, which has become widespread in our country. Experts distinguish about 200 varieties of oak, including the so-called red oak, the wood surface of which has an original bright shade. Oak is practically not subject to deformation, even under adverse external climatic conditions. Its attractiveness remains unchanged after standard polishing and staining.
Maple is one of the best woods for making light parquet, appropriate in the interior, designed in dark colors. The shade of the maple cut surface is white with a barely noticeable yellowness. Over time, its wood darkens and acquires an attractive cream color.
Hornbeam - a "relative" of birch, is distinguished by the presence of twisted fibers - the so-called pilosity, which somewhat complicates the processing of this type of wood, which is considered quite heavy and "viscous". The color of its surface is brilliant, with a mother-of-pearl effect, white or a shade of melting snow, interspersed with fine threads of sand-colored fibers.
Ash is a popular type of wood that is ahead of beech and oak in hardness. Its color is soft creamy. Ash wood is resilient, its hardness is 4.0-4.1 HB. Ash grows in middle lane Russia, also its individual varieties are found in Japan and America.
Bamboo is a traditional plant for tropical and subtropical climatic regions of the planet. Bamboo is not classified as a tree, but as a cereal, due to the structural features of the stem - a hard straw up to 40 meters in height and up to 30 cm in diameter. Bamboo parquet has a number of useful consumer properties: it is durable and wear-resistant, easily withstands drops climatic conditions. Bamboo wood has a shade of flax with the effect of an enamel coating, its structure is uniform and relatively dense. Polishing bamboo is complicated by the peculiarities of the structure of the fibers, however, the result of the finish fully compensates for the costs incurred and will allow you to appreciate the attractiveness of this type of wood.
Yellow woods
Yellow types of wood used in the production of finishing materials are:
Teak, or, as it is also called, Siamese teak, is a popular type of wood widely used in shipbuilding, in particular, for arranging the decks of expensive yacht models. Teak is practically not subject to rotting, due to the saturation of wood fibers with oily substances - according to the degree of resistance to high humidity, it is in no way inferior to larch. Not absorbing excess moisture, teak retains its geometric dimensions and does not deform.
Flounder, or Iroko, is a tree that has characteristics similar to those of teak. Its wood easily tolerates a sharp change in climatic conditions without losing its external properties. This quality can be explained by the fact that the Iroko tree grows in the tropical latitudes of Africa and is well “familiar” with the long rainy season. The color of the wood is more yellow than teak. The pattern on the cut, rhythmically wavy, with blurred boundaries of the layers, resembles the pattern on the skin of a flounder, due to the similarity with which the tree got its name.
Oliva is a tree that grows in southern Europe and Asia. Olive wood is pale amber, with a reddish tint, its surface is decorated with a pattern of ornate dark orange zigzags, somewhat reminiscent of the sunlit reflections of sea waves that appear on the surface of the wood. Olive density - 850 - 950 kg / cu. m. Wood has a relatively fine texture, so its processing allows you to achieve a perfectly flat surface.
Types of wood with a pink tint
The following species of “pink” wood are widely used in the production of parquet:
Pear is a tree of the Rosaceae family, the wood of which has a delicate pinkish tint, which gives flooring a special aesthetic. The texture of the pear is subtle, the pattern of annual rings is transparent. Pear wood has a medium hardness.
Cherry is another tree in the Rosaceae family. The shade of the wood cut can range from coffee-pink to an interesting pink-pearl. Cherry floor coverings are particularly decorative, and modern interior designers are very fond of working with them.
Dark beech - wood of this variety is easy to cut and process, acquiring a uniform brown - pink hue as a result of thermal exposure. Do not confuse the dark variety of beech with its light variety - these materials differ significantly in the shade and texture of the wood.
Alder is a popular variety of natural wood, common in our country, in Asia Minor and North Africa. Alder wood is highly stable, without changing its properties, in conditions of high humidity. Alder has a relatively low hardness and is susceptible to pests. Its value is determined by the aesthetic pale strawberry-orange shade, which gives the flooring a unique appearance. Over time, it darkens, but does not lose its decorative effect, thanks to the characteristic fine texture of wood.
Red woods
The most popular "red" types of wood are:
Dussia is a tree that grows in West Africa. Its main advantage is resistance to adverse external influences. There are two varieties of doussia - yellow and red, the latter is especially highly valued due to its unique sable-pink hue. Floor coverings made entirely of doussia or having decorative inserts made of this type of wood are particularly decorative and can be classified as vip class finishing materials.
Kempas grows in South-East Asia. The hardness of this wood species is 4.0 HB, the density is 800 kg / cu. m, shades - from golden red to rich orange. The structure of the campas is highly wear-resistant, its wood is able to withstand increased loads, however, it is easily deformed under the influence of excess moisture.
African padouk is a real exotic, floor coverings from its wood are highly valued, thanks to its decorative properties. The tree grows in certain regions of Central Africa - in Cameroon, Spanish Guinea and Zaire, Nigeria and Angola. The bright coral shade of wood, which acquires a more saturated tone over time, turns the finishing materials into a real work of art, making the interior respectable and unique.
Yarra is one of the five hundred varieties of eucalyptus. Grown on the coast of Australia, from where it is shipped to different countries peace. The shade of yarra wood is all shades of red, from light strawberry to dark cherry. Over time, the yarra darkens and acquires a noble rich color. Wood is not affected by pests due to its high strength of 6.0 HB and hardness of 820 - 850 kg/m3. Yarra is easily sanded and polished during surface treatment, acquiring even greater attractiveness.
Mahogany - grows in the central regions of America and in Africa, where it is called "zipo". The tone of the wood is reddish-brown, decorated with intricate fiber ornaments. The surface of mahogany flooring is stable and high density, has an average hardness and is easy to machine - grinding and polishing.
Brown varieties of natural wood
Among the common varieties of natural brown wood, it should be mentioned:
Merbau - the tree grows in the regions of Southeast Asia and is exported from the Philippines, Malaysia and Indonesia. The hue of the cut wood resembles red ocher, with dark and yellowish veins. In the production of parquet, with the help of merbau, oak is “revitalized” - over time, the first one darkens, and the color of the surface of the flooring evens out.
Sucupira grows on the banks of the Amazon. It is difficult to process, but it is easy to grind and polish, due to the increased hardness of the structure. The color of the wood is chocolate-crimson, with ocher veins. Sucupira is not "afraid" of insects - pests and rodents.
Jacaranda - a tree better known in our country by the name rosewood - a variety that grows in South America. Due to its aesthetic properties, it is widely used for the manufacture of musical instruments, furniture and flooring. The color of the wood is from dark red to rich chocolate, with a hint of ripe plum. Rosewood is easy to process, has a significant weight and density. Often it is replaced with similar in texture, more popular maple, birch or alder, subjected to careful toning.
Walnut - its wood is recognized as an elite finishing material, regardless of where the tree grows. Hardness, stability, high density up to 600-650 kg/cu. m - all this makes the walnut ideal for the production of flooring and interior elements.
Mutania - grows in the tropical latitudes of West Africa. Mutania wood is very aesthetic and spectacular, its shade ranges from light Brown, to olive, as if enlivened by bright purple rays.
Kumaru is a tree native to South America. Its wood is renowned for its exceptional hardness, well ahead of oak, beech, sucupira and dussia. Kumaru density - up to 1100 kg / cu. m, 5.9 on the Brinell scale. The shade of its wood is red gold, with dark longitudinal stripes of fibers. However, the material is subject to deterioration, due to a sharp change in climatic conditions and increased loads.
Lapacho - the wood of this tree species has a high density, reaching 900 kg / cu. m and 5.9 HB, but does not differ in stability, with a decrease in air humidity, it is easily deformed during the drying process. Lapacho is exported from the regions of South and Latin America. The shade of its wood is silver-olive, decorated with a pattern of dark stripes and light spots.
Dark woods
From dark varieties wood, in the production of flooring use:
Wenge is a wood that has become a rarity in the market of finishing materials due to the difficult political situation in the growing region - the African state of Zaire. A shade of wenge color is thick cocoa with black stripes of fibers. The wood has a high density of 850-950 kg/cu. m, 4.2 N on the Brinell scale, resistant to mechanical stress. Wenge fibers are oily and rich in minerals, which makes the wood quite difficult to process. The use of wenge flooring gives the interior a special charm and a certain mystery.
Bog oak - popular finishing material, which received its luxurious shade, thanks to deep tinting. Exceptional aesthetics and strength of wood make it possible to rank oak among the group of elite species.
Westwing loves wood furniture and accessories - this is a great natural material that can add warmth and comfort to every home. For each interior, you can choose the right type of wood. Whether Scandinavian style, minimalism or classic - elegant wooden furniture will become a bright accent in every room.
There are different types of wood, each of which has unique characteristics and appearance. Westwing has prepared for you a guide to the most popular breeds. Find out more right now!
Oak
The special charm of oak is its age-old rings, which give each piece of furniture a unique character. To create furniture, the yellow-brown core of the tree is usually used. Oak furniture is considered reliable, resistant to weather conditions, durable and therefore ideal for the garden, terrace or balcony.
Birch
Birch is a light, almost white wood species. Its texture is very thin, so the furniture is light, but at the same time strong and flexible. Birch furniture is usually made from solid wood, natural veneer or plywood. On the other hand, birch furniture is not suitable for outdoor placement, as it is subject to weathering.
Spruce
Spruce wood varies in shades from white to cream. It is very light, flexible and durable. Spruce can be used for all types of furniture, except for outdoor furniture, because this type of wood is soft in structure and does not tolerate moisture and temperature changes.
wild oak
Wild oak is not a separate breed, but rather a subspecies of ordinary oak. Its main characteristic is its color, which combines various shades of brown, and its durability. This wood is heavy, wear-resistant and therefore ideal for the manufacture of solid wood furniture.
mango tree
Furniture made of mango wood appeared not so long ago in our country, but has long been popular all over the world. The unique texture of wood gives a special character to each piece of furniture, in addition, this type of wood is very environmentally friendly, because it is used only when the tree no longer bears fruit.
beech core
Beech heartwood is a red to dark brown wood that only forms after 100-140 years of tree growth. Since this type of wood is found only in very old specimens and therefore belongs to rare and expensive breeds, it quickly gained popularity and became a symbol of luxury. But the main charm of beech lies in its bright appearance, which is especially noticeable on large surfaces.
Pink tree
Indian rosewood - or rosewood - is characterized by contrasting woods. This breed is very durable and ideal for making solid wood furniture. In addition, due to the strength and wear resistance of this tree, it is also used to make boats and tools.
Walnut
Walnut originally from Greece, Iran and Asia Minor. The wood of the trunk is light grey, while the heartwood is dull brown with veins of various widths. Color can also vary from tree to tree and is determined by the location and age of the tree. Walnut is very hard, heavy and inflexible.
Image Sources: living4media / House & Leisure
Pine- the most common coniferous tree. The color of its wood can be brown, reddish, yellowish and almost white with slight stains of red. best material obtained from those trees that grow on hills, dry hills, sandstones; their annual layers are located close to each other, and the wood has a dense structure. The structure of pine wood growing in humid places is looser. When dry, pine is light and pliable for carpentry work. Along the fibers, it is planed well, across - with difficulty, and sawn across - well, along - badly. Pine wood sticks well. Furniture is made from it (for this they select natural wood with a beautiful, pronounced texture), frames of carpentry structures and structures for facing with sliced veneer valuable breeds. Pine is widely used for the manufacture of doors, windows, flooring, etc. Wood is well processed with dyes and varnishes after deresining. Pine is also used for mosaics and carvings.
Spruce softer than pine, but it has a large number of small and medium knots, which makes it difficult to use in responsible carpentry structures. The texture of its wood is inexpressive. Spruce is less moisture resistant than pine, and is more likely to rot, but its wood is not very susceptible to warping, which is positive quality this material. Spruce gets off badly, but sticks together better than pine. It is widely used in mosaic sets due to its knotty texture. AT carpentry It is used mainly for non-responsible furniture designs that do not experience heavy loads during operation.
Larch occupies a special place among other conifers. Its wood has a reddish-brownish, sometimes brownish tint and is highly durable (stronger than oak) and moisture resistant. Dry larch wood is processed well, although during long-term processing of parts, the sole of the tool becomes tarred. Larch is little susceptible to warping, but with quick drying internal cracks may occur in the wood of the trunk. For finishing larch, mainly nitrocellulose varnishes are used. The breed is used in carpentry and mosaic work, used for the manufacture of carved products.
Cedar has a whitish-yellow wood with different color shades depending on the place of growth. Cedar wood is not distinguished by high density and strength, it is resistant to decay, it is not very susceptible to wormholes, it has a strong specific smell, it pricks well. In carpentry, it is used for products that are not subjected to heavy loads. Polishing of cedar wood is used little, it is finished mainly with wax. Cedar wood, like larch, is well processed cutting tool. Cedar - good material for carving.
Juniper- a coniferous shrub, the trunk diameter of which reaches 10 cm. Its strong thin-layer wood is well processed and polished, has a specific pleasant smell. Juniper is used in carpentry to make small parts, when turning, for carving and mosaic work.
Cypress and thuja similar in properties to juniper, but their wood is broader and darker in tone. They are used for small carvings. Cypress does not crack or warp.
Yew has red-brown wood with dark and light veins. The sapwood is light, almost white. Yew wood is strong and hard with a significant number of knots on the trunk. It is almost not exposed to a wormhole and is little sensitive to atmospheric changes. Planed and polished well; looks great, especially black. In carpentry, yew wood finds a variety of uses; it is a good carving material; yew veneer is valued in mosaic work.
Siberian fir It is used on a par with spruce, although it has reduced physical and mechanical properties.
Deciduous species.
Highest value in carpentry, they have not coniferous, but hardwood. Of the variety of hardwoods, oak should be distinguished first of all.
Oak characterized by high strength, hardness, resistance to decay, ability to bend, has beautiful texture and color. On the tangential section, the pores are clearly visible, and on the radial section, large core rays. The sapwood of the oak is clearly separated from the core in a light tone. Oak wood has sufficient viscosity and is well processed by a cutting tool. After lying in the water for several decades, it acquires a silky dark purple color with a greenish tint (under the "crow's wing"). Its hardness is higher than dry wood, but its brittleness is also higher. Processing bog oak is difficult. Having a lot of tannins, oak wood is well pickled. The bark of a young oak serves as a source of tannins. In a decoction of a mixture of crushed bark and oak trunk shavings, wood of other species is kept and thus saturated with tannins. Soaked in such a broth and saturated with tannins, the wood is well pickled in solutions of metal salts, acquiring the necessary color. Oak wood is widely used for the manufacture of furniture, parquet, arts and crafts, as well as in cooperage. Oak veneer is used for facing low-value species, plywood, chipboard, etc. Oak is used in mosaic work and for large carvings; for small profiles it is inexpressive. Oak wood does not accept alcohol varnishes and varnishes well, but sticks well. Ash wood is similar to oak, although it does not have pronounced core rays. When discolored, it acquires a shade of gray hair. It bends well after steaming. When drying, ash cracks a little; due to its high viscosity and strength, wood is difficult to process. Ash is easily damaged by a wormhole, so its wood is subjected to antiseptic treatment. The sapwood of the ash tree is clearly separated from the core. Its texture is beautiful, brownish-yellow. AT adverse conditions(humidity, dampness) ash quickly rots. Flexible and durable, ash wood is recommended for making home sports equipment - gymnastic walls, gymnastic boards, as well as railings, tool handles, etc. Due to low frictional resistance, ash is not recommended for cutting tool blocks. Ash is poorly polished; requires, like oak, pore-filling. Recommended for ash decorative coating nitro varnishes or waxing. Due to frequent outgrowths on the trunk and a pronounced texture, ash wood is widely used in mosaic work.
Beech has strong and solid wood; in terms of strength, it is not inferior to oak. In its pure form, beech does not have a pronounced texture, but on tangential and radial cuts, its wood is very beautiful and these decorative qualities it is used when facing furniture with sliced veneer. Beech is hygroscopic, so it is not used for products that are in humid environment. The wood dries quickly and does not crack. Beech is easily pricked, sawn and processed with a cutting tool; bends well when steamed; hard to polish. The use of beech in carpentry is varied: from planer blocks to solid wood furniture. The wood is successfully used in carving, although it has a high hardness, as well as in mosaic work. It is well finished with nitro and polyester varnishes, waxing, dyed in various solutions and bleached.
Hornbeam also called white beech. It has a hard, strong and dense wood of a whitish-gray color. The texture of the hornbeam does not differ in brightness, as, for example, in ash; light dots are scattered on an evenly matte background of its wood. Often this breed has a slanting structure of wood, so the hornbeam is pricked with difficulty. The sapwood does not have a large pinkish color with slight deviations in tone with redness or browning. Its wood is moderately hard and dense, well finished, polished and processed with a cutting tool, but it warps strongly. In mosaic works, it is used for sets of portraits, landscapes and geometric ornaments. In carpentry, it is used to make blocks hand tools.
Chestnut has several varieties; of these, the most famous are the edible and horse chestnuts. Due to its softness and uniformity, edible chestnut is used in carpentry and carving. In its structure, this breed is somewhat similar to oak and ash, but in the radial section it does not have the luster of core rays characteristic of oak. Horse chestnut is obliquely layered and resembles pine in a grayish color; has strong wood and thanks to tannins it is well etched in solutions. It is used in carpentry and mosaic work in the form of sliced veneer.
Rowan has a hard, dense, fine-grained wood, which is successfully used for the manufacture of handles for percussion carpentry tools and planer blocks. Only well-dried wood is used in business. The texture of rowan is weakly expressed.
Elm- hard, strong and dense rock, which is well finished and polished. Due to its beautiful texture, its wood is used in mosaics and carpentry, especially in the manufacture of fine furniture. Burls often form on tree trunks, which are widely used as veneers in mosaic sets.
Plane tree and plane tree(eastern plane tree) grow, like elm, in the south of our country. Their core color is brownish-brown. In a radial section give beautiful drawing wood fibers, which is successfully used in mosaic work. These rocks are moderately hard; processing them with a cutting tool due to the oblique layer is difficult; wood polishes well.
Fruit trees (plum, cherry, cherry, apricot) and some shrubs (lilac, buckthorn, hawthorn, hazel, broom, cotoneaster, barberry, etc.) are used for the manufacture of small joinery. As a rule, their wood is thin-layered, hard, of various color shades - from white-pink to purple in the core parts of the trunks. Wood fruit trees well polished, painted and etched in chemical solutions. Many of the shrubs (barberry, buckthorn, cotoneaster, broom, hawthorn, etc.) are used as dyes. To do this, use their shavings, bark and sawdust.
Teak and rosewood imported as sliced veneer for furniture veneer. Teak has a monotonous texture of a light brownish chocolate color, rosewood has a very beautiful texture with a purple-brown background, along which black and dark brown stripes run. Their narrow sapwood is light yellow. Teak wood is easy to cut, but rosewood is very difficult. These breeds have a specific smell, similar to the smell of dried, prunes. Polyester lacquer does not bond well with them, especially with rosewood, which, more than teak, highlights essential oils accumulating in places with a black tint. Red, ebony (black), lemon Tree and some other breeds.
The color and luster of wood.
The color palette of wood species has almost all shades of the spectrum, and variations of these shades include countless tonal ratios. One breed can have several dozen.
The color of wood is one of the signs by which one type of wood differs from another. The wood of linden, pine, birch, maple, aspen is light, oak and ash is brown, walnut, teak is brownish, etc. If we compare the wood of pine and oak, we can say that it is light yellow in pine, in oak - gray-brown. But in both cases, the coloring and tannins that are in its cells give the color to the wood. Breeds with warm shades of colors (ocher, brown, red-brown, yellow, orange) are more common, less often with cold ones (green, blue, purple).
Under the influence of atmospheric conditions, the color of wood can change: within each climatic zone, wood of the same species has its own color shade. The color of wood is also affected by light and air: over time, the grain of the wood darkens. So, cut down alder becomes reddish after a while. To a certain extent, the color of the wood is changed by fungal lesions, as well as mineral salts in the ground, the environment of the tree (darkening from the sun), etc. The wood is darker towards the butt, and lighter towards the top. With age, all trees also darken the wood. All this must be taken into account in carpentry and especially mosaic work, where texture and color act as a pictorial element when revealing a plot or image.
color shades various breeds can be classified into main groups, where one color of wood will prevail:
yellow- birch, spruce, linden, aspen, hornbeam, maple, fir, ash (whitish yellow with light shades of pink and red), barberry (lemon yellow), mulberry (golden yellow), hawthorn, Karelian birch, bird cherry (reddish -brownish yellow), ailanthus (pinkish yellow);
brown- cedar, poplar, elm kernel (light brown), beech, larch, alder, pear, plum (reddish-pinkish-brown), chestnut, mountain ash (brown-brown), acacia (yellow-brown), Anatolian walnut (greenish -brown);
brown- cherry (yellowish brown), apple tree (yellowish-pinkish-light brown), apricot, walnut (light (dark) brown);
red- yew, mahogany;
pink- cherry laurel (yellowish pink), plane tree (dark pink);
orange- buckthorn;
Violet- lilac, privet (core);
black - bog oak, ebony;
greenish- persimmon, pistachio.
Glitter wood- this is its property to reflect the light flux. Different breeds have different luster; to a large extent, this property is manifested in beech, maple, plane trees, white acacia. Poplar, linden, aspen, teak have a matte (satin) sheen; silky - willow, elm, ash, bird cherry; golden - cherry; silver - Siberian cedar; moire - birch, gray maple, laurel cherry.
The gloss of wood depends not only on the presence and size of the core rays, but also on the nature of their placement along the cuts: the larger the core rays (for example, in oak) and the denser wood, i.e., the more closely the core rays are located (for example, in a maple), the more significant the shine of the wood will be. The distribution of gloss over the surface is not the same and depends on the type of cut: in the radial plane it is stronger, in the transverse plane it is weaker.
Chiaroscuro overflows in some rocks are clearly visible only in the longitudinal section of the trunk, in others - in all sections. They significantly affect the decorative qualities of wood, enhancing or weakening its expressive sound, so the shine of wood is taken into account when compiling mosaic sets.
Determination of wood moisture content.
Humidity is determined using a special device - a moisture meter. There is another way. To determine the moisture content of wood, an alcohol solution of iodine is applied with a brush to a fresh chipped flake from the workpiece. If the tree is harvested in winter (less damp), then the veins will acquire a dark purple hue, if in summer (more damp) - yellowish. However, it is difficult to determine the moisture content of a knotty blank in this way, since the presence of knots will enhance the “sound” of the wood.
The best way to determine the moisture content of wood is by the chips removed from the workpiece with a jointer. The wood will be damp if thin and long chips can be tied into a knot, and dry if the chips break.
The density of wood can be determined by the degree of saturation of its moisture. So to select oak plank High Quality, samples of several boards of the same size are placed in water for several hours, after which they are weighed. The heaviest specimen will be of the lowest quality, since it has absorbed a lot of water, which means that its wood is less dense than the rest.
The juices that the tree feeds on during its growth contain a lot of various salts. When the wood dries, they remain in the pores of the checkered structure of the tree, where, under certain conditions, moisture with air also enters. This contributes to the decay of the material of the blanks. To get rid of salts, workpieces with a load are lowered onto a clean river bottom butt against the current. After a certain time (usually 7-8 months), the water will wash out all the salts from the wood. After drying, the wood becomes very durable, almost does not warp or crack. It should be remembered that not every tree can be freed from salts in this way, since many species rot in a humid environment. Therefore, only those species that are hardy to stay in a humid environment are subject to leaching: oak, pine, alder, yew and some others.
M........I
MACLURA(Maclura pomifera) - This tree comes from Central Texas. The wood is extremely durable, stronger than oak. It has a beautiful amber color that becomes luxuriously golden over time. Its fruits are familiar to many who have been to the Caucasus - green, round, rough texture, the size of an apple, inedible. Since ancient times, this durable, flexible wood has been used to make the finest bows.
MACORE(Makore, Abaku) - Grows in Africa.
MARUPA(Simarouba amara). Grows in South America. Straw-white wood. The durability is good. Application: parquet, musical instruments, decorative furniture parts, plywood. The wood is very good in cutting and planing, the surface is perfectly polished. Density kg/m3 - 440-500.
MARFIM Amazonas (Planchonella pachycarpa). Grows in South America. Wood color: juicy yellow with brownish-yellow sapwood. Durability is durable. Application: parquet, decorative furniture parts. Good in cutting and planing, the surface is well polished. Products supplied: parquet, veneer, plywood. Density: about 920 kg/m3.
MAHOGONY(TRUE MAHAGONNY) - (Swietenia candollei.) The name "true mahogany" is valid only for varieties growing in Central America. Wood from Africa, which is similar in properties, has other names, in particular, zipo (bot. Entandrophragma utile German, Italian Sipo). The sapwood is light yellow, almost colorless, the mature wood is reddish brown. The texture and structure of wood fibers are very diverse. The wood is durable, very well polished, resistant to external influences. Density: 620 - 650 kg/m3. Hardness: medium
MERBAU- (Intsia palembanica). It grows in Southeast Asia (Malaysia, Indonesia, Philippines). An African breed, very close in properties to the merbau, is the Dussia. Merbau reaches a height of up to 45 meters and, under favorable growing conditions, the diameter can reach 2 meters. On open surfaces, the trunk is short with a branched crown. Trunk up to 15 meters without knots. The main tone of the merbau color is brown, from light to dark brown, in places interspersed with yellow streaks. The wood is very hard, resistant to moisture, and does not dry out very well. Thanks to these properties, merbau is used, in particular, for decking and interior decoration on ships and yachts. AT parquet floors both in its properties and aesthetically, merbau blends very well with oak. During operation, merbau darkens (especially lighter areas), as a result of which the color of the wood is generally evened out. Density: 840 kg/m3. Hardness: 4.1
MERSAVA(Mersava) - Native to Cambodia. It surpasses oak in hardness, which, combined with a relatively low price, makes it a very attractive choice for parquet.
MOvingu- (Distemonantbus bentbamianus.) Origin - Liberia, Nigeria, Gabon, Cameroon. Use as an interline interval for furnish of rooms, furniture, parquet works. Heartwood lemon to yellow with some green or brown. This wood has glossy surface and varnishing is not particularly difficult.
JUNIPER(Juniperus) - Juniper. Its varieties: kara-archa (J. polycarpos) - Indian juniper and saur-archa (J. cemiglobosa) grow in the mountains of Turkmenistan, Kyrgyzstan in the form of large shrubs or small trees. Juniper is a coniferous shrub, the trunk diameter of which reaches 10 cm. Its strong thin-layer wood is well processed and polished, and has a specific pleasant smell. Wood darkens when exposed to sunlight. Archa, like other junipers, are heartwood with narrow sapwood. The core is brown, the annual layers are wavy, there are no resinous passages, the core rays are not visible. Juniper wood has a density of 500-700 kg / m2, it is well processed by cutting tools. It can be used to make a pencil board, but it warps a lot; in the mountains it is used for construction. Juniper oil is used in medicine for the treatment of skin and other diseases.
MUIRAKACHAIRA(Astronium lecointei Ducke). Grows in South America. The color of the wood is light brown fading to dark red with darker sapwood. Durability is very durable. Application: flooring, construction of solid structures, outdoor use. The wood is good in cutting and planing, the surface is well polished. Density kg/m3 860.
MUIRAKATIARA(Mouracatiara) - Native to South America.
MUTENIA- (Cuibourtia arnoldiana) grows in tropical West Africa. Mature wood is light brown to olive brown with dark purple hues, shiny and very decorative. Good for making furniture and parquet. Turbidity is relatively hard, resistant to loads and deformations. When dried, it practically does not crack and does not warp. Density: 800 - 900 kg/m3. Hardness: 4.0
OLIVE TREE- (Olea europea) olive family. It grows mainly in southern Europe and close areas of Asia. The sapwood is light brown, darkening somewhat later. Mature wood is yellow-white, sometimes with a reddish tinge, with characteristic irregular dark rays. Olive Tree has a fine texture, very decorative, dense, little subject to drying out. It sands very well and gives a beautiful smooth surface. Density: 850 - 950 kg/m3. Hardness: about 6.0.
ALDER(Alnus) - Alder. The most important are sticky alder, or black, (A. glutinosa) - Black alder; gray alder, or white, (A. incana) - Specked alder, growing in the European part of the territory of the CIS countries and in Western Siberia; Siberian alder. Alder is a nuclear-free breed. Its wood is light, soft and viscous. It cuts very well, does not prick when carving, is not brittle, does not crack when dried. Viscous and malleable for processing in all directions, it is used in such critical products as musical instruments: in some types of accordions, all wooden details are made only from alder. For art products alder burl is especially valuable. Fresh cut white, i.e. ordinary, alder (in total, about 15 species of alder grow in our country) quickly turns yellow, up to orange tones, but then the bright yellow color fades, the wood turns gray, although the end remains quite yellow. Dry wood in split and cross section also not a bright yellow color, but under oil or drying oil it again acquires, although not as bright as in a fresh cut, but quite intense, uniform color, which distinguishes it from other types of wood. A characteristic negative property of alder is that it is very poorly drilled (the last place among the known ornamental species). Another drawback of this wood, uniform in texture and color in the total mass, is that it often contains core repetitions in the form of longitudinal narrow brown dashes, and sometimes in the form of darker wide inclusions. In sunlight, alder wood loses its orange tint in two to three months, its color becomes similar to the color of aged pine wood. Species signs of alder are as follows. The fruits are woody cones on strong stems 14-18 mm in size, which is especially noticeable in winter. In black alder, the leaf is obovate or round, bluntly chopped off or even having a notch; the trunk (only in black alder) is elongated, straight. Black alder got its name from the black-brown color of the bark with cracks. Flowers with earrings in black alder are formed in autumn and bloom in March. In white (or gray) alder, flowering is two weeks earlier, its leaf is broadly oval, gray-green on the underside, the bark is smooth, gray in old age. White alder wood is slightly lighter and stronger than the yellow-red black alder wood. Density: 420 - 640 kg/cu.m. Hardness: low.
NUT- (Juglas regia), nut family. Grows everywhere. Main regions: Southern Europe, Asia, America. The most common are two types: walnut (J. regia) - European walnut (grows in the Caucasus and Central Asia) and Manchurian walnut (J. mandshurica) - Manchurian walnut (on Far East). By mechanical properties the wood of the Manchurian walnut is significantly inferior to the wood of the walnut. The sapwood is light, mature wood is brown-gray, with darker patches. Depending on the climate and soil, the color and structure of wood change significantly, but it is always very decorative and has long been widely used for interior decoration and furniture manufacturing. Walnut is relatively hard, but fairly easy to process. It is resistant to deformation and cracking during drying. Density: 600 - 650 kg/m3. Hardness: about 5.0.
ORMOSIA(Ormosia) - grows on the island of New Guinea. The tree belongs to the class of rare and valuable species; it closes the list of species such as ebony and sandalwood. The wood is hard and dense. Brinell hardness: high.
ASPEN(Populus tremula) - Aspen is the second largest hardwood in terms of area (1/10 of this area), grows almost everywhere. Aspen is a nuclear-free breed. Wood white color, with a greenish tint; annual layers are poorly visible, medullary rays are not visible. Aspen wood has a homogeneous structure, is easily peeled, impregnated and does not give a very smoky flame (raw materials for the match industry). Used in agriculture(wells, cellars, roofing shingles, etc.), as well as for the production fibreboard, pulp, cardboard, plywood, in wood chemistry and other industries. Application is limited due to heart rot, which is often found in growing trees. Aspen wood is not favored as an ornamental material in the special literature on woodworking: it occupies one of the last places in terms of the percentage of excellent and good quality when processing - planing, milling, turning, drilling. And woodcarvers love aspen, like linden, for its ease of processing, for light tone , the fine texture of the fiber, and for the fact that it is affordable and even more common than linden. In the handicraft industry, aspen is also "respected" for the fact that it is not afraid of moisture, for its low density. Only Siberian fir and poplar have a density less than that of aspen, while linden has the same density. Therefore, aspen is used to make light toys and dishes. Previously, troughs, tubs, and gangs were made from it. In addition, it does not crack and does not prick from impact. In addition, aspen peels well - shingles are made from it, matches are made. Aspen has another completely unexpected property - a strong increase in strength during exposure. With her lightness! The practice of our ancestors confirms what has been said, although it does not fully reveal all the reasons and secrets. It turns out that the walls of the huts built of aspen many years ago still amaze with their strength, whiteness and purity. The ax bounces off such wood, at best it sticks only shallowly. It is not for nothing that aspen is now used in villages for making shelves and benches in baths, for facing their walls - it is hygienic, bright and clean, is not afraid of moisture, does not warp or crack. It also turns out that experienced villagers make handles and handles for agricultural implements, when the combination of lightness and strength, just from aspen, is worth its weight in gold. Only for this purpose it is necessary to cut down a young aspen in the spring, when the wood is filled with juice, and allow it to dry well in the shade - to dry out. Then it will become both light and strong, like a bone. Obviously, the aspen does not just dry out, some kind of polymerization occurs under the action of the components of its juice. Oral legends say that they did the same with the harvesting of aspen logs for construction, only on each of them two or three grooves were made along the log on the bark so that the wood did not rot during drying, and the necessary juice was preserved in moderation. For the same reasons, when drying an unskinned aspen trunk, some branches were sometimes left on its top, which pulled excess moisture out of the wood. To obtain the ideal aspen wood, its trunks were harvested along with the birth of a son in the family, and it dried up until the son was separated from the family and a house was built for him. The best ax for a carpenter and joiner, as well as for a home craftsman, is also made from well-aged aspen. It is not only light, but it also does not bruise the hand, does not fill corns, which usually happens when working with a birch ax handle, which is polished and slips out of the hands (although it is better to buy an ax handle for an ax for chopping firewood from birch: its fracture strength does not depend slept from the time of year). Another property of aspen, which is a vice in woodworking, deserves attention. This is the presence of a hollow and rot in the middle of large trunks. In terms of chipping strength, aspen is similar to linden and is superior in this conifers, as well as poplar. And in terms of resistance to splitting from impact, it stands next to birch and ash, even ahead of beech, oak, maple, walnut, linden, coniferous trees. This indicates the viscosity of aspen. Aspen is cut elastically, even tight, with effort, but the surface is good in all directions, it is perfectly ground and polished. Considering the indicated properties of aspen, it is especially advantageous to use it for crafts with blind carvings, for making complex, one-piece ornaments or such decorations. Let us also mention the famous property of the silvery glow of aspen, which we observe on the roofs of the cathedrals of wooden architecture of the North of our country covered with plowshares (figured carved planks). Any wood that is not protected by varnishes or paints turns gray and gradually collapses and rots. Unpainted aspen also turns gray, but unlike other types of wood, it is more resistant to atmospheric influences and, having acquired its silvery gray color with a metallic tint over several years (according to some sources, for 8-10 years), it retains it for many decades. . By appearance aspen can only be confused with its related poplar (aspen has a second name - trembling poplar). She, like the white poplar, has a smooth greenish-gray bark, brownish at the base, cracked (in old trees). But the aspen leaf, unlike poplar, is ovoid.
PADUK(African Paduk) - (Pterocarpus soyauxii.) Grows in Cameroon, Spanish Guinea, Zaire Nigeria and Angola. Mature wood is coral red, but gradually darkens. The structure of the wood is straight-grained, so it is easily processed. Paduk is very resistant to mechanical loads (pressure) and external influences. Dries easily, but requires slow drying. Density: 750 kg/cu.m. Hardness: 3.8.
PALISANDER- Dalbergia latifolia, Dalbergia javanica. rosewood - name different breeds having wood similar in color and structure. Most often, this name is used for black dalbergia wood (Dallbergia nigra) - Rio rosewood. growing in Brazil, and rosewood(D. latifolia) - Indian rosewood (in Southeast Asia). This is a sound scattered vascular hardwood with large vessels. The tree is very large, reaching 25m in height and 1.5m in diameter. Sapwood and mature wood are very different. The sapwood is narrow, grayish-white, sometimes with a pinkish tinge. Mature wood - very dark (dark brown) with lighter longitudinal veins, may have a subtle purple or lilac hue. On the cut, exits of numerous pores (channels) are visible in the form of small black dots or dashes. It is characterized by high hardness and strength, but at the same time it lends itself well to machining, grinding and polishing. It is used for the manufacture of valuable musical instruments (pianos), artistic furniture, typesetting parquet, turning products, etc. Drying rosewood is associated with significant difficulties, because. when this process is accelerated, intense cracking occurs. Density: up to 1000 kg/cu.m.
ASIAN ROSEWOOD(Sonokeling, Rosewood) Grows in South America. Sapwood and mature wood are very different. The sapwood is narrow, grayish-white, sometimes with a pinkish tint. Mature wood - very dark (dark brown) with lighter longitudinal veins, may have a subtle purple or lilac hue. On the cut, exits of numerous pores (channels) are visible in the form of small black dots or dashes. It is characterized by high hardness and strength, but at the same time it lends itself well to machining, grinding and polishing. Brinell hardness: high
PANGA-PANGA It grows in the tropical jungles of East Africa. Mature wood is golden brown to very dark brown with black veins. The structure is large, smooth-fibered, the wood is very decorative. The wood is heavy, resistant to pressure and bending. Its pores contain many mineral and oily substances that make it difficult to process and, in particular, varnishing. Density: 900 - 1000 kg/m3. Hardness: 4.4.
PAU MARFIM(Balfourodendron riedelianum). Grows in South America. The wood is creamy white with light brown sapwood. Durability is durable. It is used in the manufacture of decorative parts of furniture, parquet, plywood, wood paneling. The wood is good in cutting and planing, the surface is well polished. Density kg / m3 - 700.
FEATHER(Aspidosperma populifolium). Grows in South America. The color of the wood is yellow to rose red with purple spots and pale yellow sapwood. Durability is durable. Application: furniture and carpentry, flooring, veneer. Moderately easy to work with, sticks well. Density kg / m3 - 700.
PINCADO- (Xylia dolabriformis). It grows in the tropical rainforests of Southeast Asia, in many cases in close proximity to teak. The color of the mature wood is generally reddish brown, with dark brown to violet brown veining; during operation, it darkens somewhat. The structure of wood is fine-fibered, twisted, dense. Due to the peculiarities of the structure, pinkado wood is fairly well resistant to deformation (warping), does not split or delaminate during processing. Density: about 950 kg/cu.m. Hardness: high.
FIR(Abies) - Fir. The following species are most common: Siberian fir (A. sibirica) - Siberian fir; white fir (A. nephrolepis); Sakhalin fir (A. sachalinensis); Caucasian fir (A. nordmanniana); European fir, white (A. Alba) - Common silver fir. Fir is a nuclear-free, ripe wood species. The wood is very similar in appearance to spruce wood, but differs in the absence of resin passages. Caucasian and European fir wood has the highest rates. Both types of wood are used in the same way as spruce. The use of other types of fir for the manufacture of some products is not allowed due to the reduced strength of its wood.
PLANET ORIENTAL, plane tree, (Platanus orientalis) - European plane, - the most common type of plane tree, grows in Central Asia, is found in the Caucasus. Heartwood with a wide grayish sapwood, not sharply demarcated from the reddish-brown heartwood. The annual layers are poorly visible, the vessels are small, inconspicuous, the medullary rays are wide, clearly visible in all sections, they form a characteristic texture on the radial section. Sycamore wood is used in furniture production as a finishing material, as well as for the manufacture of artistic and household products.
CORK TREE. The breed is deciduous. The sapwood is almost white, vaguely demarcated. The core is white with a slight reddish-brown tint and shine. The softest and lightest of all breeds. Very high porosity. One of the fastest growing breeds. It is used in the manufacture of compensatory thresholds and borders.
PUNICADO(Pyinkado, Plane Xilia) Other names: pyin, pran, pkhay, irul. Grows in Burma, India. Wood. The sapwood is narrow, pale, reddish-white. The core zone is homogeneous, reddish-brown with a few specks or with darkish veins. The wood is dull, with straight, wavy or tangled grains and a medium-sized texture. Due to deposits of resinous substances, the wood is dotted with dark sticky spots. The density of wood in a dry state is on average 990 kg/m3. Strength. durable, hardwood. Brinell hardness: high
RAMIN- (Gonystylus macrophyllum). The color of the wood is light yellow with light brown sapwood. Resistant durability. Application: parquet, joinery, furniture, stairs. Easy to glue, good for screws and nails, good for cutting and planing, good sanding. Density kg/m3 670
PINK TREE has wood of yellowish-brown or pinkish-brown color with brown stripes and stains; in terms of physical and mechanical properties, it is close to walnut wood; well processed and finished. Used as facing material in mosaic sets. Belongs to rare materials, imitated by light Anatolian (American) walnut.
ROSCHINO(Roxinho, Pearple heart) - Grows in South America. (see Purple heart).
MOUNTAIN ASH(Sorbus aucuparia) - Roman tree. Distributed in the forest zone of Russia. Grows as shrubs and small trees. Heartwood, with broad reddish-white sapwood and reddish-brown heartwood. The annual layers are clearly visible, the vessels are small. core rays hardly visible on the radial section. Has a characteristic luster. In terms of mechanical properties, rowan wood is somewhat inferior to beech wood. It is used for the manufacture of handles for percussion instruments, turning products. Only well-dried wood is used in business. Young branches are used to produce black paint.
BOXWOOD EVERGREEN(Buxus sempervirens) - European box. It grows on the Black Sea coast of the Caucasus and in the Crimea. Non-core wood with light yellow, matte, very dense and hard wood; annual layers are narrow, slightly wavy, vessels and medullary rays are imperceptible. In terms of physical and mechanical properties, boxwood wood is close to hornbeam wood. It is used for wind musical instruments, carved and turned art products.
SUNBOW(Sunbau) Native to Southeast Asia. Sunbau is traditionally used to produce very expensive and exclusive furniture. In ancient times, it was used only for the manufacture of ritual items and household items of royal persons. It is not without reason that it is called the "solar tree", it is as if woven from the sun's rays. When you change the viewing angle, the sunbau wood seems to have its own "inner fire", it shimmers with a unique silky-gold light. The density of wood is much greater than oak. Very stable breed with changes in humidity. Brinell hardness: 4.5
SANDAO(Sandao) - Native to Southeast Asia. The wood has a unique silky-gold sheen.
SAPELLI- (Entsndropharagma cylindricum). It grows in equatorial Africa. Sapelli has properties close to true mahogany and their surfaces are very similar. Therefore, it is often used instead of mahogany and is called by the same name or, given one of the local names, zipo-mahogany. The tree is very tall and large, the trunk has an even cylindrical shape. The sapwood and heartwood are distinctly different. The sapwood is wide, can have all shades from white to gray. Mature wood is red-brown with a beautiful golden sheen. The spiral arrangement of the fibers gives the wood a special decorative effect. Good for polishing. Has a tendency to warp when dried. Density: 600 - 650 kg/m3. Hardness: medium.
SEQUOYADENDRON(Sequoiadendron) and sequoia (Sequoia). Each genus has one species. Both grow in California (USA) mainly in nature reserves. Giant sequoiadendron, or mammoth tree (S. giganteum) - Gigant sequoia reaches enormous sizes. There are trees up to 120 m high with a butt diameter of 15 m and an age of 6000 years. Not inferior in size and evergreen sequoia (S. sempervirens), which is bred and grows well on the Black Sea coast of the Caucasus. Sequoia and secoiadendron are coniferous heartwoods with narrow white sapwood. The kernel is light cherry to reddish brown. The annual rings are clearly visible due to the darker and denser latewood. Early wood is loose and soft. It does not have resin ducts, but contains numerous resin cells arranged in vertical rows. The core rays are single row. In terms of physical and mechanical properties, sequoia is quite close to spruce, but surpasses it in resistance to decay. At home, it is used in furniture production, for interior decoration wagons, cabins, in cooling towers, silos, in the construction of bridges, flyovers.
SEREGEYRA(Amburana cearensis). Grows in South America. The color of the wood is yellow to medium brown with a pink tint. Durability is moderate. Application: parquet, decorative furniture parts, used in shipbuilding. The wood is good in cutting and planing, the surface is well polished. Density kg/m3 - 600.
SIPO(Sipo, Utile, Assie) - Grows in Africa.
PLUM- very susceptible to cracking and warping during drying. Solid and durable wood with many multi-colored veins perfectly pricked and polished. Most often it goes to the manufacture of jewelry and to the relief decoration of furniture. Turned utensils made of plum wood are also highly valued.
PINE(Pinus) - Pine. It occupies about 1/6 of the area of all forests in Russia and neighboring countries. The most common pine (P. sylvestris) - Common pine. It should be noted Crimean pine (P. taurica), the wood of which differs from ordinary pine in high resin productivity. Pine wood has a slightly pinkish heartwood, which becomes brownish-red over time, a wide sapwood from yellowish to color pink, clearly visible annual layers with a clear boundary between early and late wood, rather large and numerous resin canals. Medium-density wood (p12=500 kg/m3), fairly high strength, resistant to decay, well processed. It is used in construction, mechanical engineering, furniture production, railway transport, container production, for fixing mine workings, etc. It is widely used as a raw material for chemical processing in order to obtain cellulose, fodder yeast; pine wood products large quantities are exported.
SOPHORA JAPANESE- (Saphora japonica L.) Moth family - Papilionaceae. Japanese Sophora is a tree up to 25 m high with a dense spreading crown, like white acacia, with smooth green branches and slightly cracked bark covering the trunk. Leaves pinnate, with 11-15 pairs of leaflets; leaflets ovate or oval-lanceolate, pointed, dark green above, gray-white below, due to the presence of many petiole hairs complex sheet strongly thickened at the base. The flowers are small, yellow, irregular, moth-like in large panicles. The fruits are juicy beans, indehiscent, 6-10 cm long and 1 cm wide, flattened-cylindrical, bead-shaped, with slightly pronounced constrictions between the seeds, green with a yellow stripe along the edge, remain on the tree throughout the winter. Seeds are located in the expanded parts of the bean, up to 1 cm long. Most of seeds do not develop. Blooms in summer. Sophora japonica is native to Japan and China. It is widely cultivated along roads, in gardens, parks in the Crimea, the Caucasus, and Central Asia as an ornamental and phytomeliorative plant.
SUCUPIRA- Bowdichia virgilloides (Diplotropis purpurea) It grows in South America, mainly in the Amazon basin. The sapwood is narrow and almost colorless. Mature wood has beautiful reddish-brown tones interspersed with light or yellowish veins. The wood is very heavy, durable, contains oily substances, and is not damaged by pests. It is processed relatively hard, but it is well ground and polished. Drying must be carried out very slowly, as otherwise, the wood warps. Density: 850-1100 kg/m3 Hardness: 4.1.
TAMARINDO(Dialium guianense). Grows in South America. The color of the wood is brown-orange with dark sapwood. Durability is very durable. Floor covering, building facade decoration, outdoor use, stair construction. Processing is moderately difficult, the surface is polished medium. Density kg / m3 - 1120.
TAUARIE(Couratari oblongifolia). Grows in South America. The color of the wood is light straw with an orange tint and darker sapwood. Durability is durable. It is used to cover the floor, decorative parts of furniture, musical instruments. The wood is good in cutting and planing, the surface is well polished, glued easily. Density kg / m3 - 620.
DARK RED MERANTI- (Shorea pauciflora). The color of the wood is light pink. Good durability. Application: windows, doors, furniture, stairs. It sticks easily, accepts screws and nails well, is good at cutting, planing, grinding. Density kg/m3 650
TIGER TREE(muiracatiara) Unusual breed, has warm color copper with rich texture and contrasting color stripes.
TEAK- (Tectona grandis) Native to India, Indonesia, Burma and the surrounding region, as well as East Africa. The wood is golden brown with dark patches or patches, the texture is well defined, the grain direction is even or slightly wavy. The Burmese variety of wood is more uniform in colour, with few speckles, while in India, especially in Malabar, the mottling of the wood is often abundant. It has a high content of oily substances and therefore practically does not rot and can be preserved under favorable conditions for hundreds of years. Teak lends itself well to all types of mechanical processing. It is very resistant to loads and external influences and therefore has long been used in shipbuilding. Density: 550 - 750 kg/m3. Hardness: 3.5.
YEW(Taxus) - Yew is a very ancient breed. Currently, there are two species: European yew (T. bacata) - Common yew (in the mountain forests of the Caucasus and Crimea) and spiky, Far Eastern yew (T. caspidata) - Japanese yew. Yew wood has a red-brown heartwood and sharply demarcated narrow yellowish-white sapwood. The annual layers are winding, there are no resin passages. Wood has a beautiful texture and is valued as a finishing material; high-quality furniture is made from it. Burl wood is used for making handicrafts, sliced veneer. Yew is often used to make carved pieces, but there can be a lot of wastage due to the strong knotting of the wood.
POPLAR(Populus) - Poplar. This genus unites 30 species, including the aspen considered separately. The most widespread are black poplar, or black poplar, (P. nigra) - Black poplar and white poplar (P. alba) - White poplar, growing in the vast territory of the CIS countries. Its wood is very soft, light, its density is even lower than that of linden and aspen. Therefore, poplar is used to make wooden shovels, troughs, dugouts, and plywood. It is a sound rock with white sapwood and a light brown heartwood. It is susceptible to rotting, fungal attack, unstable to splitting from impact. In the very last place among the most famous species is poplar in terms of the percentage of output of parts of good and excellent quality: when planing (21%), milling (3%), grinding (in this it is slightly better than only linden, which has an indicator of 17%). Worse than poplar, only alder is drilled (it has an indicator of 64%). The only advantage of poplar compared to other species is that it is easy to drive a nail into it - the wood does not crack. AT this case only willow can compete with him. But screwing screws is easiest in poplar. The most valuable and distinctive quality of poplar (albeit, of some of its species) is the unusually beautiful flat cuts of its butt. Such wood is used for the manufacture of veneer for facing expensive furniture. By the appearance of the trunk and bark, white (or silver) poplar can be confused with its related aspen. But white poplar has different leaves: not round, like aspen, but five-lobed. Black poplar differs markedly from aspen in its dark gray bark with deep longitudinal cracks and triangular or rhombic leaves, wedge-shaped at the end.
TUYA. There are many types of thuja, but how furniture material the one growing in Algeria is especially prized. The liveliness of the paint, the subtlety and elegance of the arrangement of the veins, the soft transitions of tones, the ease of polishing and the glassy sheen - everything in this wood is good and excels. the best varieties mahogany. Particularly beautiful are the brown-pink specks, which, like the skin of a leopard, are dotted with the entire surface, this coloring gives the tree a magnificent original look. All shades and colors retain their liveliness, which should also be counted among the merits of thuja. The color of the wood is indefinite, most often it presents intertwined brown, brown, yellow and red veins.
FERNAMBUK used in the manufacture of mosaics. The most expensive are violin bows and conductor's sticks made from this tree. During storage, fernambuque can change color from yellow with an orange tint to dark cherry or even black. Its wood practically does not rot and, when dry, does not warp. But a tree that has just been cut down dries out, cracks and changes shape. In terms of severity in processing, it is second only to eucalyptus.
PURPLE HEART/ROCHINO(Peltogine spp.). Grows in South America. The color of the wood is violet-purple or deep lilac with creamy white to pinkish-brown sapwood. Application: in turning, furniture production, flooring, facing works, in the construction of bridges, light ships. Processing is moderately difficult, requires little sanding, easy to glue. Durability is very durable. Density kg / m3 - 880.
PISTACHIO(Pistacia) - Pistachio tree. Within the CIS, two species grow: the pistachio tupolistnaya, or keve tree, (P. mutica) - Amblyophyllos pistachio (in Transcaucasia and Crimea) and real pistachio (P. vera) - in Central Asia. Pistachio belongs to the heartwood species with a wide yellowish-white sapwood, sharply limited from the core, which, when freshly cut, has a greenish-brown color. During chamber drying or long-term storage, the kernel becomes reddish-brown. Large vessels are clogged with tills. Small vessels in the late zone of annual layers form oblique lines. The core rays are very narrow, imperceptible. In wood, gum-resin passages pass along the core rays, and there are vertical passages in the bark. The wood is very dense, hard, wear-resistant, difficult to split, oily to the touch. Used in mechanical engineering.
ZEDR. (Cedrus ssp.) Origin - North Africa, Asia, Himalayas. The most famous is Satin Zedr from North Africa. In Europe, the peel grows in parks and artificial plantations. The zest is the longest-lived tree and can be up to 3,000 years old. It is currently used in the manufacture of furniture, but was previously actively used for shipbuilding. The zest has a reddish-light wood, which has a characteristic pungent odor. Its surface treatment is very difficult due to the high resin content, which prevents staining and polishing.
European Championship(Che) - Growing in Southeast Asia, the wood, which is superior in hardness to oak, has an attractive "chocolate" hue.
CHERRIES in appearance it is very similar to cherry, but reaches such a thickness that it can be sawn into boards. Its wood is denser and harder than that of cherry, and therefore its use is preferable. This tree is highly susceptible to wormholes. It's good for the "lungs" furniture sets and individual Art Nouveau items.
EBONY. This trade name combines different species that have black wood. The most famous Ceylon ebony (Diospyros ebenum) - Ebony, growing in India, Sri Lanka, and African ebony (D. crassiflora), growing in Nigeria, Ghana, Cameroon, Zaire. Ebony is a hearty, diffusely vascular hardwood with narrow white sapwood. The core is glossy black. Annual layers are invisible. The core rays are narrow, not visible on any section. Vessels are small, collected in radial groups 2-3 together; the cavities of the vessels and fibers of the libriform are often filled with accumulations of black nuclei. The density of dry wood of the first botanical species is 1190 kg/m3; the second - 1030 kg/m3. The best Indian and Ceylon ebony produces Diospyros ebenum, which grows in abundance throughout the western plain of Trincomalee in Ceylon. The sapwood is pure white. Only the core is black. Although only the center of the tree is used, logs nearly 1 m (1 to 3 ft) in diameter can be obtained. A significant proportion of East Indian ebony is represented by D. melanoxylon, D. montana and D. quaesita. D. dendo, native to Angola, is a valuable forest tree with very black and hard wood known as Gabonese, Calabar or Niger ebony. American or green ebony produces Brya ebenus, a bean tree or shrub; the wood is a rich dark brown, very heavy, extremely strong, and highly polished. It is used for the manufacture of wind and other instruments, artistic and decorative products, handles, etc.
MULBERRY(mulberry tree) has reddish-brown wood; her sapwood is narrow. When exposed to light, wood darkens over time. It is difficult to process with a cutting tool, it is very well polished. Finds application in turning and mosaic works. The best variety is black mulberry.
EBONY. It grows in Southeast Asia (Indonesia, Celebes, Philippines, etc.). Sapwood from pink-gray to light brown, very wide (up to 10 cm). The color of mature wood is from very dark brown to velvety black with characteristic lighter (light brown) longitudinal veins. The wood is very dense and heavy and sinks in water. It is used mainly in artistic parquet floors, in turning works, for the manufacture of woodwind musical instruments, piano keys, and jewelry. Density: over 1000 kg/cu.m. Hardness: very high, over 8.0.
EUCALYPTUS(Eucolyptus grands hill). Eucalyptus trees are native to Australia and Oceania. It grows in Southwestern Australia, Indonesia, Tasmania, Philippines. In the CIS - the Black Sea coast of the Caucasus. There are more than 500 species. Among them are giant eucalyptus (E. gigantea) - Alpine ash (up to 150 m high) and spherical eucalyptus (E. pilularis) - Blackbutt. Eucalyptus trees are characterized by a high growth rate. More than 150 species were grown on the Black Sea coast of the Caucasus. Dalrymple's eucalyptus (E. dalrympleana) turned out to be the most frost-resistant. Heart scattered vascular hardwood. The sapwood is light, the heartwood is brown in various shades. Annual layers are visible only on a cross section. The physical and mechanical properties of eucalyptus wood depend on the botanical species. In most cases, the density of dry wood is 700-900 kg/m3; wood has high strength and biostability. The wood is good in cutting and planing, the surface is well polished. Density kg / m3 - 580. Eucalyptus wood in its homeland has wide application: used in car building, construction (pillars, sleepers, end bridges, underwater structures); essential oils are obtained from the leaves.
SOUTH AMERICAN CEDAR(Cedrelea spp.). Grows in South America. The color of the wood is dark red-brown with white-gray or pink sapwood. Durability is durable. Application: furniture and joinery production, flooring, facing veneer. Easy to glue, accepts screws and nails well, good at cutting, planing and sanding. Density kg / m3 - 770.
APPLE TREE widely represented both in cultivated and wild condition, in all areas. It has a slightly textured, with slight deviations in tone, pinkish color with redness or browning. Its wood is moderately hard and dense, well finished, polished and processed with a cutting tool, but it warps strongly. In mosaic works, it is used for sets of portraits, landscapes and geometric ornaments. In carpentry, it is used to make blocks for hand tools. It is used in the production of expensive furniture, knife plywood, canes. The outgrowths on the trunks of the apple tree (burls and nodules) are used in the manufacture of caskets, cigarette cases, pipes and writing instruments.
SYCAMORE- A variety of common maple. It has a grainy structure, which is appreciated in mosaic works.
JARRA- Eucalyptus. The fast-growing yarra is common in the southeastern part of Western Australia, reaches a height of 30-45 meters and a diameter of 90-150 cm. The trunk is without knots up to a height of 20 meters. Yarra (lat. Jarrah) is the trade name of one of more than 500 varieties of Australian eucalyptus, which is distinguished by a particularly bright color (all honey agarics are red, mainly from strawberry to dark red). Over time, the yarra darkens and its color can take on very different shades. The wood is very hard and durable, resistant to all kinds of pests. It is difficult to process, but it is very well ground and polished. When it dries quickly, it warps, twisting in the direction of the fibers. durable construction timber Jarry is suitable for furniture, floors, and window and door joinery in wet areas. Due to its good fire resistance, yarra is also used to cover railroad platforms. Density: 820 - 850 kg/m3. Hardness: about 6.0.
ASH- (Fraxinus excelsior), oilseed family. It grows mainly in the central part of Europe, although there are American and Japanese varieties of ash. Common ash (F. excelsior) - European ash has the greatest distribution in the middle and southern strip of the European part of the CIS; Manchurian ash (F. mandschurica) - Japanese ash (in the Far East). Ash wood is very dense, hard (heavy), sound. The heartwood is light brown, gradually turning into a wide yellowish-white sapwood. In cross section, light continuous wavy lines are visible along the rings. Ash wood is strong for splitting, but cracks when dried. However, successfully dried ash in handicrafts is resistant to cracking. It is mainly used in the production of sports equipment, in carpentry, furniture and parquet industries in the manufacture of veneer; in car and shipbuilding, as well as in furniture production in the manufacture of veneer. Made from ash stair railing and tool handles. The bark of growing ash is dark gray, with longitudinal cracks. Characteristic species features of ash: seeds with tongue-shaped wings hang in bunches among the branches, which is especially noticeable with the onset of winter; leaves are pinnate with 9-13 oblong leaflets; black buds in winter. It grows in the middle and southern strip of the European part of the CIS, in the Caucasus, in the Crimea. best age for use 80-100 years. Density: on average about 700 kg/cu.m. Hardness: 4.0 - 4.1.
JATOBA(KURBARIL) - (Hymenaea courbaril) Grows in tropical Central and America from Mexico to the Amazon basin. The sapwood is grayish-white, relatively wide, the wood has very beautiful and decorative tones orange-brown to violet-brown. The wood is heavy, strong, hard and relatively elastic. It is difficult to process, but it is ground and polished almost to mirror shine. When grinding, in some cases, the color of the pores of the wood may appear from almost white to yellow-lemon. Drying must be carried out very slowly to avoid cracking. Density: 840 kg/m3. Hardness: 4.4
A........K M........I
Loading...