How to make a mirror table with your own hands. Unique do-it-yourself infinity table. The subtleties of the design of the table

Beautiful and original furniture attracts the eye. You can look at it endlessly, you want to surround your space with it both at home and at work. But many know that designer tables or the chairs are not at all budgetary. However, if your hands grow from where you need and eat minimum set working tools, then the creation original furniture you are quite capable. The do-it-yourself infinity table is a direct proof of this. And you will find out by carefully reading our article.

Unusual table

This invention is not the development of the design department furniture factory or a designer who never leaves the pages of glossy magazines. Instructions for creating such a table with the effect of infinity with your own hands appeared on the Imgur photo hosting. In just a few hours, the publication gained more than 60 thousand views. And it turned out that its author was an American high school student who had been preparing a project for a youth forum for three months.

Many people liked his invention, and dozens of craftsmen immediately tried out the instructions for creating a table with the effect of infinity with their own hands. Such simple furniture suitable for any room:

A do-it-yourself backlit table will fit perfectly into the interior of the office. Any visitor will immediately pay attention to such furniture and everyone will remember it. No wonder if your office wants to visit again.
In an apartment or a private house, such a table would also be quite appropriate. It is ideal for family and romantic gatherings. In full serving, it will cause delight and genuine interest among your guests.

Important! At first, this table seems to be nothing special until the backlight is turned off. But as soon as the LEDs installed around the perimeter of the tabletop start working, there is a feeling of a bottomless surface. It looks amazing with the lights on, but it's even more impressive in the dark with the main lights off.

Illusion of infinity

When creating a seemingly complex 3D table with your own hands, a simple display principle is taken as a basis:

The effect of infinity is achieved quite simply - with the help of LED lighting around the perimeter, made in various color variations.
tabletop in this case is a design of mirrors with the effect of infinity with their own hands.
To make the light emission as noticeable as possible, the upper glass in this design is made of a translucent material.
Experts advise to opt for red diodes. It is he who is less prone to scattering than others, so the visual tunnel will seem deeper.
To control the backlight, an on-off button or a special remote control can be used.

Some craftsmen use simple garlands when creating a backlit table with their own hands. But still it is better to use LEDs, as they have a number of advantages:

More saturated and deeper light than conventional lamps;
LED strips are strong enough and resistant to any vibrations;
Ice lamps burn out much less often, each of them can work continuously for about 100 hours;
The color range of LEDs is much richer and more diverse;
The service life of the LED lighting is not affected by the number of switching on and off;
They are environmentally friendly and safe;
With all the advantages, LEDs are also much cheaper than conventional lamps;
Impact low temperatures they are not afraid.

Important! To date, there are several ways to connect the LED strip to various power sources, whether it is a regular outlet or a computer. It all depends on your imagination and financial capabilities.

Table mounting

As we have already said, it will be quite difficult to find such furniture in a store or on the market. Therefore, a do-it-yourself table with an infinity effect is the easiest way to get an exclusive little thing in your interior. To do this, it is enough to know the sequence of actions and aim at the result.

Materials and tools

Of course, when creating a 3D table with your own hands, you cannot do without tools and materials. During this work you will need:

lumber to create the table itself - both wood and chipboard are suitable for this;
sandpaper for woodworking, however, if you are working with ready-made parts ordered from the factory, this material can be excluded from the list;
a mirror of suitable diameter, which will serve as the base of the countertop;
translucent mirror - it should be 10 cm larger than a regular mirror, since this part is installed on top of the countertop and covers all parts of the upper structure;
LED strip - its length will depend on the size of your future do-it-yourself backlit table;
power supply for LEDs and wires;
self-tapping screws;
Super glue;
Double-sided tape;
screwdriver

Important! If at this stage you have a question, infinite mirror with your own hands - how to do it, then the tinted surface can be replaced with a regular one, having previously applied a tint film on it. There is also an alternative to the usual mirror:

for this, food foil is glued to the glass;

for work, glass with a mirror coating is purchased.

If you are in doubt whether glass with a reflective coating is suitable for making a coffee table with an infinity effect with your own hands, then you can arrange the following test for it:

Carefully, so as not to drop, place a mirror and glass in front of each other.
Any light source is an ordinary lamp, and it is better to place the backlight that you will use between them.
Evaluate the resulting effect.

When preparatory stage finished, it's time to start assembling a 3d table with your own hands.

Drawing development

First of all, you will need a design drawing, drawn up taking into account all the dimensions of the future piece of furniture:

Before you start assembling an infinity coffee table with your own hands, you need to think about where they will be electrical elements that affect the quality of the backlight and create the desired effect.
After that, it is necessary to put exact marks on the location of the socket, switch, and potentiometer on the drawing.

When assembling mirrors with an infinity effect with your own hands, it is imperative to take into account one very important factor - the depth of the tunnel that you want to see in the finished furniture. It is achieved by maintaining a certain distance between the details of the countertop:

if you want to know in advance what the depth of the tunnel will be, then multiply the distance between the mirrors by 16 to get the approximate apparent depth of the tunnel;
if the result did not suit you, then when drawing up the drawing, take into account and indicate by how much you need to increase the space between the details of the countertop;
in most cases, the optimal distance between the lower and upper mirrors is 8 cm, but here it all depends on your preferences.

After the drawing is drawn up, you can start assembling the backlit table with your own hands.

Base assembly

In order to get a new, original piece of furniture, you can use ready-made furniture. To do this, you need to detach the countertop. We propose to consider the option of creating a backlit table with your own hands from scratch:

To begin with, we create a strong and durable frame for future furniture. To do this, we take 4 boards, 4 metal corners that will fasten the structure and lower part designs.
Now we use sandpaper. We process with it the surface and edges of each detail of the future table with the effect of infinity with our own hands
Using a drill, we make holes for the elements, according to the drawn up drawing. They also need to be processed with sandpaper.
Let's move on to assembly. To do this, we connect the parts in single structure, the joints can be additionally glued to increase the possible load on your future do-it-yourself backlit table.
It is better to stand the finished base for a day, so that all the joints dry out and the structure gains strength.

Table top assembly

Now let's move on to creating a do-it-yourself mirror with an infinity effect, which gives originality to this furniture. As we have already said, you can use mirrors, or you can replace them with pre-treated glasses. The second is a more complex option, and we suggest considering it. In this case, the list necessary tools it is worth adding a glass cutting device. General scheme work looks like this:

We cut out a part from the plexiglass blank required sizes. We calculate the width and length at the stage of drawing up the drawing.
Then we process the edges of this part in order to simply avoid injuries at work.
We glue a mirror film on this detail of the future table with the effect of infinity with our own hands.

Important! It is better to pre-sprinkle the surface with water, and even better - with a soapy solution. Then, during the gluing process, air bubbles trapped under the film will be easy to remove.

We cut off the excess film along the edges and wait at least 12 hours for the part to dry thoroughly.

While the mirror dries, we understand common device countertop. In the context, it will look like a layer cake:

The basis of the structure is a mirror, which is placed with the display side up.
The sidewall of the countertop body is attached to the main mirror.
A front frame made of chipboard is attached to the installed sidewalls. Its outer diameter, as we have already said, can be equal to the outer frame of the table. But the inside needs to be done a little less.
Already on the frame of our table with the effect of infinity with your own hands from wood board a translucent mirror is installed.
LEDs are attached with double-sided adhesive tape around the perimeter of the front frame. Moreover, this must be done in such a way that the bulbs are not visible from above, but they should be reflected in the mirror, which is installed as a base. That's why external dimensions frames are getting bigger.
The wires are laid inside the frame, which should be hollow. If there is a need to bring out the wires, then holes of the required diameter are drilled in advance in the legs of the future table with illumination.

After that, we fasten the entire structure of the tabletop with screws and finish assembling the table. It is also worth assembling the control panel. It includes a switch, a power slot and a potentiometer.

In order to create a glowing table with an infinity effect with your own hands, you should carefully study the connection diagram of the LEDs to the power source in advance. If you do something wrong at this stage, it can lead, at best, to a short circuit, at worst, to a fire.
As a rule, glasses are pasted over with a special protective film before work in order to avoid scratches on the surface in the process. If you do not skip this stage, then the surface of your furniture will have a presentable appearance.
If your table is not square but round, then you will need double-sided tape when cutting glass. With it, fix the router in the middle of the workpiece, then it will be possible to make the circle perfectly even.
When creating a table with an infinity effect with your own hands, you should use only waterproof glue. Surely, at further exploitation you will spend wet cleaning furniture, and no one is safe from tipping a cup of tea onto the surface.
It is better to fix the LED strip around the perimeter of the tabletop with high-quality double-sided tape. Before assembling the structure together, you should make sure that the LEDs are securely fixed. If even a part comes off during the use of the table, the integrity of the illusion will be broken, and you will have to disassemble the entire structure in order to eliminate this defect.
The LED lighting control parts are best placed in a plastic box and secured under the table top. You should not hide it inside the structure, it is better to leave free access to the block - in case of a breakdown.

If you have a good enough knowledge of electrical engineering, then you can make a table with spectacular lighting that will respond to movement. For this you will need.

Illuminated table - very interesting and eye-catching element decor rooms.

Thanks to the use of a translucent mirror and many sources light is created stunning Effect shining tunnel.

This unusual a piece of furniture is also called an infinity table, 3D table and a glowing table.

In contact with

Classmates

LED strips

Used in the manufacture of the table LED Strip Light, which creates the effect of infinity.
The most convenient are self-adhesive ribbons.

Operating principle

The LED strip consists of two diodes - single-chip, having one color spectrum, and three-crystal, consisting of three color spectra (green, blue, red).

radiation crystals blend to form a broad color spectrum gamma.

Specifications

LED type - The main difference between all LED strips from each other. The most common are SMD 3028 and SMD 5050 LEDs.
The abbreviation stands for "surface-mounted device", and the numbers indicate the dimensions of the LED lamps: 3.0 x 2.8 mm and 5.0 x 5.0 mm.
Density. The more LEDs per running meter, the brighter the glow from the tape.
Glow color LEDs can be anything. The most popular are white, yellow colors, cold and warm tones.
Moisture protection. IP 20 - open, IP 65 - moisture resistant, IP 68 - the highest degree of moisture protection.

Advantages

Large light return;
high strength and vibration resistance of tapes;
Long service life (about 100 thousand hours);
various tones and shades glow lamps;
inertia tapes is small, which allows you to use the most high brightness from the moment you turn it on;
Quantity cycles switching on / off does not affect the service life of LED strips in any way;
Environmental friendliness;
Safety;
budgetary price;
Not prone to breakage due to low temperatures.

Note! High temperatures categorically contraindicated for LED strips.

How to make backlight computer desk using LED strip, see video:

DIY 3D table

Consider making more complicated but the safest beautiful LED table.

materials

In order to make a table, you will need the following materials:

Mirror(diameter 60 cm);
Mirror translucent self-adhesive film;
Styrofoam(for the body);
Glass or plexiglass (thickness 4 mm, 65 x 65 cm);
metal strip in a roll (for a window);
wires;
Instantaneous Super glue;
Bilateral scotch;
power unit 5/5.5V 200/300mA with USB output;
Self-adhesive tape LED(not less than 1.5 - 2 meters);
Arduino Uno;
programmer for Arduino (for projects);
USB to power the microcontroller.

Note! The mirror can be absolutely any shape: square, circle, oval, D-shaped bar, etc.

Tools

Tools, necessary to create an LED table:

router(a nozzle is required for the manufacture of round parts);
regular or
soldering iron(you definitely need solder for a soldering iron);
dremel;
scissors;
knife(for cutting metal and plexiglass);
pencil, pen, thin marker;
square(ruler).

Stages of work

Step 1. Cut out a piece of plexiglass circle according to the diameter of our mirror. The edges clean up, remove the string.

Note! When cutting a circle from Plexiglas, the milling machine must be driven quickly so that the edge does not melt.

Step 2 Gently glue on the plexiglass self-adhesive film. We glue the plexiglass to the table with adhesive tape. Remove the film applied to plexiglass, and a film from a mirror film. Spraying Plexiglas water, and even better - soapy solution. We place the mirror film on the glass and drive out all the resulting bubbles.

Step 3 Protruding edges of the mirror film cut off scissors. We leave the entire structure to dry (no less 12 hours).

Step 4 On the dried mirror plexiglass, carefully attach metal strip with transparent superglue.

Step 5 Glue the LED strip on internal side of the metal strip.

Step 6 We drill holes in the metal strip for wires.

Step 7 We polish the received holes.

Step 8 Connection code can be write yourself, or you can use ready-made ones. Scheme connecting the Arduino Uno controller:

Step 9 From plexiglass you need to cut 10 - 15 small rectangles. Using transparent instant glue, attach them to facial side of the mirror. They will serve as supports for designs from glass and metal. Size rectangles should be such that the strip, together with the plexiglass, overlaps our mirror.

Step 10 into rectangles install top design with glass. The adhesive must be completely dry out. It is advisable to put something heavy on top for the best surface bonding.

Step 11 Second (external) film remove from plexiglass. This design can be used as mirror. We install the structure on a table with a tabletop of the same or smaller diameter.

Not worth it take for the manufacture of a luminous table, if you are not sure that Right connect led strip to the battery or mains. Wrong or inaccurate connection can lead to short closure and fire.

Films that protect glass from external influences, filming lastly so it is save your appearance.

Before cutting plexiglass in the middle of the circle bilateral sticking a piece of wood with tape bar. It will serve as a support for the router.

Glue must be taken waterproof.

glue you need a good, strong double-sided LED strip scotch. If the tape comes off when the table is completely ready, have to open up the entire structure fixes this problem.

minicontroller put in a box and attach to bottom countertops.

For food ribbons can be used Electricity of the net or build a small battery. When powered by a battery, the table will become even more safe and will not depend on the power grid. It can also be installed in country home without electricity.

LED strips are safe and durable. To illuminate the table, you can use plain or colorful LED strip (they differ only in price). Luminous the table will please the owners and their guests with an unusual design.

How to install desktop lights in the kitchen, see the following video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

This Coffee table ik acquires real charm in complete darkness. A bottomless well glows in the center of its tabletop: Hundreds of cold lights, going to infinity, fascinate and attract the eye...

At the same time, the table does not lose its direct purpose: you can serve it for a romantic dinner or use it for tea drinking.

A round table top with a diameter of 120 cm and a thickness of 2.8 cm made of solid pine, as well as a table leg with four supports, were purchased ready-made - in a building materials store. In addition, the manufacture required a sheet of mirror, tinted glass and LED strip. I will say right away that the mirror can be replaced with glass by sticking on it food foil. And instead of tinted glass, take the usual and special tinted film.

The working tool that I used to make the table: manual frezer, jigsaw and drill.

"Well" in the section shown in the drawing. As you can see, it consists of 3 cylinders. The diameter of the middle cylinder was chosen based on the length of the LED strip (the circumference is equal to the product of the diameter and the number P). In my case, the length of the LED strip is 157 cm, respectively, the diameter of the base of the middle cylinder is 50 cm. The diameter of the base of the upper cylinder is 50.5 cm, and the lower one is 49.5 cm. Therefore, I cut out a mirror circle with a diameter of 50 cm, and a circle of tinted glass 50.5 cm. I entrusted cutting to a professional from a glass workshop.

First, I sawed out a cylinder of a smaller diameter. Made a jigsaw in the center of the tabletop through hole with a diameter of 49.5 cm. For this, it is convenient to use a template - a circle. It can be made from plywood, plastic or hardboard. Then, stepping back 1 cm up from the bottom edge, he removed the walls of the hole by 0.5 cm with a milling cutter - he prepared a ledge for the mirror. Since the thickness of the tinted glass is 40 mm, I made the upper ledge 0.5 cm deep and 0.4 cm high. I also cut it out with a cutter.

To connect the LED strip, I drilled a through hole at the bottom of the middle cylinder to bring the electrical wire under the countertop. Then he laid the mirror on the lower ledge. For fastening, you can use double-sided tape or glue.

I glued an LED strip to the wall of the middle cylinder (the distance from the strip to the mirror and glass should be approximately the same). I connected the tape to the power supply and fixed it on the bottom surface of the countertop. And then he closed the "well" with tinted glass. The gap between glass and wood was filled with transparent silicone sealant and attached the leg to the tabletop.

Reading time ≈ 6 minutes

You can make the interior unique and original with the help of unusual pieces of furniture, for example, a table with an infinity effect. Making such a little thing yourself is not difficult if you follow a simple instruction. The finished product will organically complement any modern interior and will cause genuine delight among households and guests!

Table with LED lighting.

Table feature

Externally, the table is not much different from any ordinary coffee table. However, as soon as the backlight is turned on, the tabletop of the product begins to flicker and glow with hundreds of lights, creating the illusion of infinity. You want to admire such magic all the time, but those who are indifferent to unusual table not found among adults or among children.

A backlit coffee table looks especially impressive when the lights are off in the evening.

The effect of infinity is achieved due to the special design of the tabletop - its box consists of two mirrors, and a diode tape is installed on the sides. At the same time, a translucent mirror is selected for the top cover so that the light pattern is more visible and pronounced.

A more detailed design of the product is shown in the photo below:

Design.

You can turn on the product using remote control or a special switch on the box.

To illuminate the countertop, you can choose diodes of any desired shade or combine several colors. But experts especially recommend taking a closer look at the red diodes - due to the small dispersion, the endless tunnel acquires more depth.

Such unusual item furniture is perfect for home use as well as for placement in the office. It can be made in absolutely any size and from any material.

Table with lilac backlight.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

boards for the frame (made of wood or chipboard);
mirror according to the parameters of the countertop;
translucent mirror. Dimensions should be 10 cm larger than the lower mirror;
self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
materials for connecting the tape: controller, programmer, wires, power supply with USB;
consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take ordinary glass and paste over it yourself with a tint film.

Idea: to cut down on work, in any furniture store you can purchase the simplest table in design and use it as a finished base.

Why choose LEDs:

They give a rich, beautiful, deep shade.
Longer service life without burnout (at the same time, the number of on / off does not affect the service life).
No heating.
High efficiency.
A variety of colors.
Acceptable cost.
Light bulb safety.

Assembly

Before assembly, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and consider the location of the electrical elements.

To get an idea of what the flickering lights will look like in finished product, just place any light source between the bottom and top of the table and look at the result.

Regarding the distance between the mirrors, everything is individual and depends on your wishes. But often the average value is chosen - 8 cm. To calculate the depth of infinity, the distance between the covers must be multiplied by 16. Also keep in mind that the depth of the tunnel will depend on the light transmission of the top cover. After all the calculations, you can proceed directly to the assembly.

Step-by-step instructions for making a table with an infinity effect with your own hands - making a base:

From bars with a section of 5 * 5 cm and metal corners you need to make a frame for the future table. For fastening, use screws and a screwdriver.
With help sandpaper carefully process all edges and corners to give them smoothness, eliminate burrs.
Drill holes for electrical elements with a drill, follow the drawing. The holes need to be sanded tighter.
For additional fastening of the structure, you can process the joints with glue. After that, the frame must dry for at least 24 hours.

Frame assembly.

Tabletop assembly step by step:

To plywood sheet right size attach boards (section 5 * 1 cm) along the outer perimeter, and at a distance of 5-6 cm along the inner perimeter. You should get a kind of gutter between the boards - this is where the wiring and electrical elements will be placed (see photo above).
Place a mirror on the bottom of the countertop with the reflective side facing up.
To the inside of the smaller frame, you need to attach the LED strip with double-sided tape.
Wiring is laid in the space between the frames.
Attach the top mirror cover to the table top.
The whole structure is fastened with screws.

Tabletop assembly.

At the end of all the work, you should get something like this table with a mirror surface:

Finished product with backlight off.

However, it should be understood that you can make a table with an infinity effect from any material that you know how to handle - for example, plexiglass, plastic, metal.

When working with mirrors and glass protective film remove only at the end of all processes.
Be sure to thoroughly study the diode connection diagram in order to avoid a short circuit, or even worse, a fire.
Use a moisture-resistant adhesive for fastening.
In the event of a breakdown of electronic parts, it will be convenient to have free access to them, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and fixing it under the table top.

Use all sorts creative ideas to draw the attention of the buyer to your product. Self-taught masters successfully plagiarize creative inventions, trying to introduce their own features into the design. So, the table with the effect of infinity looks bright, original, not from some well-known manufacturer furniture, but one that is made by hand. It is not easy to design this, but it is real if you are striving for something new, have the skill of carpentry, want to try your hand at making furniture. Technical knowledge is also important, especially circuit diagram operation of the LEDs.

How do you achieve the illusion of infinity?

When you peer into such a space, it seems that somewhere there, in the depths, there is a portal to another dimension. To achieve this effect, you need only two mirror canvases, suitable in size, and the LEDs that are located between them, with inside. Choose the color of the lamps that you like best.

Important! Experts advise taking red light bulbs to design a mirror table with an infinity effect. With their help, it is possible to achieve maximum effect due to the property of color - it is less prone to dispersion than others.

The backlight can be controlled by an on-off button or a special remote control.

Getting Started

To design a table with an infinity effect, you will need a set of tools and materials. In the work of the master will be useful:

boards made of chipboard or wood;
sandpaper;
mirror canvas with dimensions of 60x70 cm;
translucent mirror with a width of 10 cm more than a normal mirror. It can be replaced ordinary glass covered with a mirror film;
power supply with USB output;
self-adhesive LED strip - 1.5-2 m;
wires;
USB cable for powering the microcontroller;
programmer;
microcontroller;
self-tapping screws;
Super glue;
screwdriver

It looks interesting version of the table with the effect of infinity, made using a garland. This option is easier to implement and will not cost as much as a design that requires the purchase of special equipment.

How to assemble a tabletop?

Taking four boards, twist the frame (sidewalls) of the future table with the effect of infinity. Stick a mirror on the front side of the box, choosing the reflective surface according to the size of the cabinet base.

Assemble the LED frame. In terms of dimensions, this part should be equal to the outer diameter of the frame, and in terms of the inner one, it should retreat from the edges inward by 1-2 centimeters. Having finished with the manufacture of the box, an LED strip is glued on the inside of the frame and screwed with self-tapping screws to the already finished sidewalls of the structure.

Now we have to work with electronics. Start with the holes you need to drill to bring the wires out. After that, attach the translucent mirror surface to the frame using special screws.

Important! Masters advise to nail thin strips along the edges of the frame, forming a single plane in height with glass. At the final stage of work, an upper frame is attached to these rails, which ensures secure fixation.

The subtleties of the design of the table

Not every master succeeds in making a coffee table with an infinity effect. Furniture makers have in their arsenal - plexiglass and self-adhesive mirror films that simplify the design process. Inside the box, two walls are obtained, mutually reflecting each other. The one that is turned to the mirror is processed additionally, or translucent glass is purchased, although this material is quite rare.

Do not forget to pay attention to the depth of the tunnel located between the two mirror surfaces. It is determined based on the following indicators:

distance between surfaces. By multiplying the actual opening width by 16, you can get a number that characterizes the visualization depth;
throughput of a translucent material.

Important! A do-it-yourself table with a 3D infinity effect will last longer, and the backlight will work without failures if you choose a power supply unit with a 50% power reserve as an electric carrier.

How to assemble the base and legs?

Having completed the work on designing the countertop, you just have to put the bedside table on the legs. To do this, choose an array of wood with a section width of up to 10 cm. In one of the volumetric legs, wires will be hidden in the future. Such a move allows you to make the design aesthetic.

The wires are also taken out of the countertop, but such a product looks less attractive, at the same time it does not differ in functionality.

Having bought blanks or assembled legs, form a through hole with a diameter of up to 5 cm in one of the supporting structures. Grooves are made in the upper part of the tabletop, through which the wires are passed. In addition, a corner hole is cut out, which is responsible for fixing the tabletop.

The height of the hole must match the height of the countertop. Its depth is calculated individually in each case. The main requirement is to ensure reliable fixation of the countertop. Such grooves are made in each of the legs.

Arrangement of fastening

To design a table with an infinity effect with your own hands, you also need horizontal plane on which the countertop would fit. It can be a wooden square 8-10 cm larger than the main structure. This free space wooden frame and is used for the location and wiring of wires and additional equipment ensuring the smooth functioning of the system.

Holes are formed at the corners of the tabletop, into which the legs are subsequently screwed or inserted. After supporting structure assembled, attach the outer frame, attach the countertop to the finished structure. Wires are placed inside, which are brought out through one of the structural elements.

Having finished with the assembly, the open space between the compartment with wires is closed, fixing the table top on the inside of the base.

How to calculate the width of the additional fastening for the table top?

For fastening from above, a special frame is made, the width of which is calculated as follows: the thickness of the outer frame is added to the width of the cut gutter with a couple of centimeters in reserve, which help to fix the table top with a frame.

The frame is assembled from four wooden blanks and fastened with self-tapping screws. Then, with the help of bolts, they are screwed to the outer frame, capturing the frame of the countertop with LEDs. Remember that holes are pre-drilled to prevent splitting. tree species in progress.

Having on hand the fundamental instructions for the table with the effect of infinity, it will not be difficult to make such a design with your own hands. A beginner will have to work harder, but the result will exceed all expectations.