Bituminous roof. Bituminous roofing - installation price, device, advantages and disadvantages. General information about bituminous mastic

The popularity of flexible tiles confidently relies on the traditional "three pillars" of low-rise construction. This is an attractive price, long-term operation of the coating and extremely simple laying technology.

An important advantage is the ability to cope with the roof of the roof with your own hands. Only for an impeccable result of work, you need to know how bituminous tiles should be laid on the structure to be equipped, which should be taken into account during installation to form the perfect coating.

A flexible tile is one of the varieties of soft roofing, made according to the principle of rolled materials. In terms of technical and technological essence, this is a modified roofing material, improved in terms of strength, aesthetics, and wear resistance.

For ease of installation and the formation of a spectacular look, it is cut into elements with a figured outer edge. They are called shingles, shingles or tiles, they are laid by analogy with wooden roofs according to the “fish scales” principle.

In the manufacture of flexible tiles, the same technologies are used as in the production of rolled bitumen-polymer roofing options. Several important layers take part in its structure, these are:

  • Fiberglass. Serves as the basis of the specified roofing. It is fiberglass that provides high strength, resistance to chemical, atmospheric, mechanical, biological aggression.
  • Bitumen-polymer shell. It is welded from above and below onto fiberglass, directly forming the structure of the material and impeccable waterproofing protection. Oxidized and supplemented with polymeric components, bitumen has almost zero moisture absorption.
  • External mineral dressing. Processing with granulate from the front side of the roof gives the impression of an expensive natural stone or copper coating. The second role is to protect the outer surface of the material from the external negative that occurs during operation.

The back side of the shingle tiles is sprinkled with sand or covered with a polymer film so that during transportation and storage they do not deteriorate, sintering with each other. Before laying, the film or sand is removed in order to be glued to the base prepared for the roofing device.

Many companies are now engaged in the production of various brands of flexible tiles, including both foreign and domestic representatives. Each of the manufacturers strives to make their own contribution to the process, to create a product with unique properties and technological advantages.

In some, the back side is completely covered with a self-adhesive bituminous composition that adheres the tiles to the base and to each other, in others this substance is applied only in stripes. There are differences, but they are minor.

As a result of laying, the technology of which is not much different from all manufacturers, all types of material under the attacks of UV rays are sintered together into a continuous carpet and reliably glued to the base.

Benefits of using bituminous shingles

Piece flexible roofing is produced in the most extensive color, texture, and decorative variety. In the abundant assortment it is difficult not to find the material necessary for the design.

In addition to the above priorities, justified by manufacturing features, the pros and cons of shingles cut into tiles include:

  • Unlimited technological possibilities. Using this type of material, you can equip a roof of any architectural complexity, regardless of the chosen configuration and the size of the slopes. Tiles are easily mounted on bulbous domes, multifaceted tent structures.
  • Compatibility. The result of laying perfectly harmonizes with the exteriors of low-rise and high-rise buildings, made in any of the architectural styles that are in demand today. Suitable for classics, and for antique styling, and for newfangled design trends.
  • Easy installation. Having familiarized yourself with the laying rules, the arrangement of the roof using bituminous tiles can be carried out independently. When contacting builders, it is not necessary to hire a large team; a couple of people can easily cope with the work.

It is impossible not to note the remarkable insulating qualities. Bituminous tiles, after sintering under the sun's rays, form a waterproof carpet that prevents all attempts of atmospheric water in any form to penetrate into the thickness of the roofing system. A flexible roof ideally dampens external noise interference, without letting external sounds into the equipped housing.

Maintainability is rightfully considered a valuable advantage. If one or more adjacent shingles are damaged, it is not necessary to completely remove the roof and lay a new one, it is enough to replace the damaged part of the roof.

It is advisable to change the damaged area to a material with a similar color and quality, for which it is recommended to stock up on a pack of material from the same series from which the entire roof is composed. However, the appearance of a piece roof allows some deviations in color, so it is acceptable to use a slightly different color.

Disadvantages of bituminous piece coating

No matter how hard roofing developers and manufacturers try, there is still no ideal option for roofing. Flexible shingles similarly have a number of disadvantages, including:

  • slope restrictions. The smallest angle of inclination of the slopes for possible laying is considered to be 12º. For flat structures, piece roofing is not suitable, because. before sintering, the tiles have many holes that can let water through. They can cause seepage and interfere with tile bonding.
  • The complexity of installation. Despite the simplicity of the technology, installation will still require much more time than when arranging a roof with large-sheet material, for example, profiled roofing sheet or metal tiles.
  • Incompatibility with conventional roofing material. It is unacceptable to use traditional roofing material as a waterproofing lining carpet, which is capable of “pulling” bituminous components from the roofing, which ultimately leads to destruction, and in some places to swelling of the roof.

In addition, the working life of a conventional roofing material is significantly less than its improved counterpart, from which flexible tiles are made. It is unreasonable to arrange a base for laying the coating, which will serve less.

Step by step laying technology

The stages of work on the construction of a roofing system with a flexible tile coating are carried out in a standard sequence for all types of roofing. First, the base is prepared, then the markup is carried out, the material selected for the arrangement is laid, additional elements are installed.

The same actions are performed during the installation of shingles, however, there are some technological subtleties that we will now analyze.

Step #1: Foundation Preparation Process

Flexible tiles are laid on a continuous crate constructed from edged or tongue-and-groove boards, moisture-resistant plywood marked FSF or OSB-3 boards. The material for the base device must be consistent in thickness, which is especially important if a board is used.

In the device of the crate, it is necessary to observe the technological gaps required to ensure the linear expansion of the material in case of moisture. Between the boards and plates leave "gaps" of 3-5 mm. The board is laid along the cornice outline, starting from the lower edge of the roof.

The slabs are mounted in such a way that the result resembles brickwork, i.e. there should be no cross joints. It is permissible not to leave gaps or reduce their size if the crate is installed in the summer. The thickness of the base for the flexible coating is selected depending on the pitch of the rafters.

A waterproofing carpet is laid along the crate, for the device of which it is necessary to take the material recommended by the manufacturer of the grade of bituminous tiles selected for laying. It has already been noted that the traditional roofing material is not suitable for these purposes. In addition, if it is used, the roof warranty will be voided.

To decorate and strengthen the roof perimeter, metal protection is installed in front of the waterproofing device, these are:

  • Cornice planks. Mounted in front of the device waterproofing carpet. They are fixed to the crate, staggered every 10-15 cm. Galvanized fasteners with wide caps are used.
  • End planks. They are installed above the lining waterproofing along the edge of the gable overhangs. Attach them in the same way.

The standard length of the strips, as a rule, is not enough to install along the entire length. They are lengthened by simply applying the next similar element with an overlap on the previous 3-5 cm. Fasteners in this area are placed after 2 cm.

Stage #2: implementation of waterproofing works

Usually, manufacturers produce all the components for the roof device themselves, including waterproofing lining carpets. They are made from a mixture of bitumen with a polymer, but they are made thinner than the coating itself, and do not use granulate for sprinkling.

The specifics of the waterproofing lining device depends on the steepness of the structure, if:

  • Slope within 12-18º. They arrange continuous waterproofing protection with preliminary fastening of duplicate waterproofing in areas where the likelihood of leakage is greatest, which include all convex and concave corners of the structure, cornices, penetrations, gable overhangs.
  • Slope over 18º. Waterproofing protection is placed only on areas of possible leaks - those very curved and convex corners, i.e. in the valleys, along the hip and ridge ribs, along the cornices, along the gable overhangs and around the passages of communication pipes through the roof.

In the first case, a continuous waterproofing carpet is laid in horizontal stripes, starting from the cornice line. Before laying it, waterproofing of problem areas is reinforced with self-adhesive water-repellent material.

The waterproofing itself is laid horizontally, in longitudinal panels, so that each overlying sheet overlaps the previous one by 10 cm. As a result of this arrangement, moisture ingress into the roofing system is completely excluded. In the longitudinal direction, the overlaps are 15 cm.

In the second case, the insulation is glued fragmentarily. Self-adhesive roll material is laid along the cornices and the line of valleys, at convex corners and along the gable overhangs it is permissible to use protection with less waterproofing properties, to stick a water-repellent lining on bituminous mastic.

At the intersection of sewer, ventilation, chimney pipes and other communications, a lining carpet measuring 1 × 1 meter is glued.

Stage # 3: marking the roof before laying

Marking is necessary to speed up the laying process, facilitate and systematize the work of the roofer. At this stage, it is most convenient to think over and adjust the roof, because. most often, there are still some deviations in the geometry of the equipped slopes both vertically and horizontally.

The markings are made with coated construction cord. The lines drawn with it are not a strict guideline for roofers, they only outline the general direction and do not allow them to stray from it when performing laying work.

Lines are "drawn" along and across the ridge ribs. The pitch of the longitudinal marking is equal to the width of the bituminous shingle. Horizontal guides beat off 5 standard rows, this is approximately 80 cm.

During marking, you should decide from what point the fastening of flexible tiles will begin. It all depends on the length of the slope, on the shape and size of the curly teeth of the outer edge of the bituminous tiles.

On slopes of impressive length, shingles are laid from the center. This makes it easier to align the row if there is a possibility of horizontal displacement of the piece roof. For the correct laying of bituminous tiles on short slopes, it is necessary to calculate in advance how many uncut elements will lie on the surface in order to reduce cutting.

Step #4: Installation of shingles

Consider the procedure for laying bituminous tiles using the example of working with Shinglas material, a product supplied to the market by TechnoNikol. In her assortment, materials varied in tone with symmetrical and asymmetrical external teeth.

Depending on the coating series, the tiles in their upper part are either glued to the mastic or attached with an adhesive back. In the second option, it is not necessary to use mastic for fixing ordinary tiles; it is enough to detach the protective polymer film and attach the shingle to the required place.

Each tile must be nailed. Ordinary tiles are fixed to the prepared base with roofing nails with wide caps that ensure reliable fastening of the flexible material. The number of fixation points depends on the steepness of the structure.

Nails are hammered clearly perpendicular to the base, deviations are unacceptable. They are placed at a distance of 2-3 cm from the edge. The serrations of the row laid over cover and mask the attachment points of the underlying tiles, thanks to which they are hidden from view and protected from rust.

Before proceeding with fixing the flexible tiles, the starting strip is laid. It is used in finished form, specially produced for finishing cornices with skates, or they are made independently by cutting off curly protrusions-petals from ordinary bituminous tiles.

The flexible shingle is laid with an offset in each subsequent row so that the overlying petal is just above the joints of the two underlying ones. It is necessary to shift, but there are no clear requirements for the selection of a pattern, the main thing is to close the fixation points.

Regardless of the features of the series, it is customary to lubricate the extreme tiles with bituminous mastic by a minimum of 10 cm. This is necessary to protect the roof from heavy rains.

Flexible tiles cover the entire surface of the slopes, not reaching the edge of the hip ribs and the ridge ridge by 0.5 cm.

Stage # 5: arrangement of valleys, junctions, ridge

Like any other type of coating, shingles require decorative and protective design. It will give aesthetic completeness to the roof, as well as protect its edges from the penetration of atmospheric phenomena dangerous for the roof.

The valleys are equipped in an open and closed way. According to the first, the tiles are simply laid on top of the waterproofing carpet laid in the groove as usual. However, the edge of the tiles falling into the valley is not fixed or nailed, not reaching the axis of the valley by about 30 cm.

After laying the flexible tiles completely on adjacent slopes, two parallel lines are beaten off with a coated cord, in accordance with which the excess coating is cut. The distance between the lines is from 5 to 15 cm, depending on the slope of the slopes. Narrow grooves are arranged on steep roofs, wide - on gently sloping structures.

According to the second method, tiles are first placed on a gentle slope, while they go onto an adjacent steep surface by about 30 cm. The upper corner of each laid tile is additionally fixed with nails.

After arranging the entire slope, the line of the upcoming undercut is beaten off with a coated cord. It is carried out at a distance of 7 cm from the axis of the groove. Flexible shingles on a steep slope are placed taking into account this line, cutting them in the process of fastening. To improve the fastening of cut tiles in places that do not have an adhesive back, they are smeared with mastic.

The junctions are equipped with the use of a wooden lath, loosened along the length along the diagonal. The size of its wall is 5 cm. The triangular rail is nailed along the junction line of the roof with the walls, with a ventilation shaft, with a brick pipe, etc.

Before arranging, brick surfaces are plastered and coated with a primer. After laying the slats, the waterproofing carpet is glued so that one edge of it extends at least 10 cm onto the vertical surface. The second edge is glued to the horizontal surface.

Metal strips are placed on top of the roof at the junctions, the upper shelf of which is deepened into the brick wall by about 1.5 cm.

To equip the exit points of the antenna and ventilation pipes, specialized elements are produced that seal the passage. Their use greatly simplifies the work of the roofer and speeds up the procedure.

Arrangement of hip and ridge ridges is carried out using ridge-cornice elements, divided into three tiles along the perforation line. You can use ordinary tiles by cutting off the petals from it, and then also cutting it into three parts.

Before attaching the spinal trim, the outline of it is traditionally beaten off with coated cord. Tiles bent in half are laid on the side opposite to the prevailing winds in a particular area. Each previous one is superimposed on the next one. The overlap must be at least 5 cm.

As a result of fixing the back plates, their open part must be turned along the direction of the wind. So that the gusts do not “shaggy” the flexible tiles and, as it were, flow in his direction.

On hip roofs, convex corners are first equipped, the tops of which are closed with a ridge assembled from the shingle. On the roofs arranged in the manner described, ventilation is provided by the installation of aerators.

If it is planned to build ventilation through a ridge rib, then it is closed with a ridge aerator. Instead, two boards connected at an angle can be used, on top of which spinal tiles are attached.

A visual guide to the installation of flexible bituminous shingles will help you thoroughly understand the technology:

Bituminous coating deserves close attention of the owners of suburban property. It looks great, serves for a long time, reliably protects the roof structure. The information we offer will help you to carry out roofing work on your own and to control a team of hired builders.

Soft roofing is one of the popular types of roofing. It is successfully used both in the construction of private houses, outbuildings, and for multi-storey buildings. Materials of this group are made on the basis of bitumen and fiberglass. They have such advantages as: ease of installation, increased noise, hydro and heat insulation properties. In this case, even for the repair of special costs will not be required. And all the work can be done independently.

Roof repair documentation

When carrying out repair work on a soft roof, they are guided by the following documents:

  • estimate (work production document). It takes into account all planned repair activities on this roof. For example, dismantling the roof, preparing the base, installing new material and sealing joints, creating a waterproofing layer. The estimate includes the cost of consumables and combustible materials, as well as the cost of their delivery. This document will help to estimate the budget for future repairs and decide whether to carry it out on your own or to provide an opportunity for specialists to do it;
  • SNiP (building norms and rules). During the repair, it is important to follow the requirements that are set out in the document SNiP "Repair of soft roof" number 11-26-76. It contains all the necessary materials for waterproofing, types of mastic, roofing materials and requirements for the order of work;
  • PPR (project for the production of works). This document is important if repairs are being carried out on the roof of an apartment building. It indicates the rationale for the repair work, the results of the survey of the roof, its characteristics, methods of organizing and methods for the production of roofing work.

Types of damage and types of repair

A soft roof needs periodic inspection. It will help to identify all violations of the integrity of the roofing in time and to carry out restoration work in a timely manner. Common problems with soft roofs are:

Swelling of a soft roof may appear as a result of a violation of the technology of laying materials

Moss on a soft roof appears as a result of a violation of laying technology

The delamination of the roofing material can be repaired by sealing the ends and reinforcing the seam with a patch

Soft roofing may crumble after the end of its service life or under adverse conditions of use.

Bituminous shingles can change color over time and even exfoliate.

A preventive examination should be carried out at least twice a year. At the same time, it is recommended to regularly clean the roof from branches, debris and snow. These measures will increase the service life and minimize repair costs.

Depending on the type of damage, there are three types of soft roof repairs:

    Local or current - involves the elimination of small defects in the roofing sheet.

Local repair of built-up roofing provides fast restoration of the coating at low cost

Roof refurbishment consists of removing old roofing and installing new roofing material.

Emergency repairs are carried out immediately after an unforeseen roofing violation to avoid even more problems.

Soft roof bitumen

Soft roofing is ubiquitous today. It is easy to stack, so its popularity only grows from year to year. Soft roofing materials can be produced both individually and in rolls, made on the basis of various materials. Another indisputable convenience is that repairs, elimination of deficiencies and the waterproofing process do not require large investments and time. However, first things first.

Features of a soft roof

This type of material is one of the five most popular in Russia. They cover baths, cottages, garages and gazebos. Soft roofing is made on the basis of:

It is bitumen that makes it easy to solve problems in the form of defects, swelling, the appearance of fungus and other troubles. From time to time it is required to check the roof for its integrity and make repairs. How to do this, we will tell in our article.

In addition, the soft roof looks very attractive. Its light weight is also a plus. There is no additional pressure on the base of the roof, building and foundation.

Possible problems during operation

To extend the life of a soft roof, it is necessary to inspect it twice a year for defects, the causes of which can be many. You need to pay attention to:

  • delamination at the joints;
  • swelling;
  • the appearance of cracks and other damage where water could accumulate.

Timely elimination of problems will keep the coating in its original form and extend its service life. High-quality repairs are the key to excellent waterproofing of the roof.

Repair of a soft roof is carried out using bituminous mastic. You can buy it or make it yourself. In addition to repair, bitumen can also be applied:

  • for roof waterproofing;
  • for sealing seams;
  • for carrying out anti-corrosion measures on a metal roof;
  • for the manufacture of soft roofs.

However, let's talk about repair in more detail. The fact is that today the market is full of various sealants and mixtures for repairing soft roofs. Anyone can get confused in this diversity. Suppose a defect is found that requires repair. What to do to someone who decides to immediately make repairs? First of all, you need to choose a material.

Bituminous mastic as a material for roof repair

We propose to consider a simple bituminous mastic as a material. Its advantages are as follows:

  • it is an economical product;
  • material tested by generations;
  • repairs are carried out quickly and efficiently.

Characteristics of the material and its advantages

Modified bitumen is a solution of two or more components. Consider the positive characteristics:

  • increased elasticity and viscosity;
  • resistance to oxidizing agents, alkalis and other aggressive materials;
  • withstands elevated temperatures up to +100 degrees;
  • not afraid of sunlight;
  • withstands low temperatures down to -40 degrees;
  • Easy to apply and light weight
  • has high strength;
  • after application there will be no seams;
  • meets all waterproofing requirements.

Thus, the material can be used on any type of roof: single-pitched, multi-pitched, flat, and so on.

Physical properties, especially increased elasticity, allow the hot mortar to stretch, as it is necessary for the master, and after hardening, tighten. There will be no bad consequences from this. The consumption of mastic per 1m2 is extremely small. It is believed that this is the best quality solution. The problem with many of the materials that people try to replace bituminous mastic with is that they can break down over time when applied to a crack. The crack itself, under the influence of temperature, humidity and the sun, even with mastic, will try to expand. Poor material will simply not withstand this stretch over time.

All mastic for the repair of soft roofs can be divided into two types according to the method of its application:

  • cold application;
  • hot application.

In addition, today a huge number of roof repair materials are produced in the form of bituminous mastic with various compositions.

In addition to bitumen, the composition may include:

  • rubber;
  • isobutylene;
  • polymer modifier;
  • other additives.

In appearance, the mastic is a black homogeneous mixture in the form of briquettes, paste, liquid or thick glue. Depending on the form in which it is produced, the method of its use and the consumption of material per 1m 2 change.

Manufacturers, in turn, also divide all mastic into four types:

  1. Polymer cold application (used for almost all types of repairs, including for anti-corrosion treatment).
  2. Roofing (used for waterproofing, but the name itself comes from the method of use when applying rolled roofing material to the roof).
  3. Rubber cold application (for repair work and sealing joints).
  4. Adhesive (functions are similar to those possessed by roofing mastic).

The compositions of different manufacturers differ, however, the main component remains unchanged for many years. This is a modified bitumen of petroleum origin. For increased elasticity, latex and resins based on synthetics are used. The viscosity, which is obtained as a result, affects the consumption of material.

Additionally, we can not say about the minuses of bitumen:

  • liquid bitumen can leak, so many manufacturers add various modifiers to its composition;
  • in severe frost (below 40 degrees), the material may crack.

To prevent the formation of cracks for roofing in the north of the country, special compounds are used, supplemented with additives. This must be indicated on the label.

The choice of mastic for repair work

When choosing, carefully read the label. Good material should be made in accordance with GOST 30693-2000 or GOST 14791-79. Regardless of whether the bitumen is modified before you or not, you need to check a number of parameters:

  • density should be within 1000-1100 kg/m3;
  • the expiration date must be indicated on the packaging;
  • the seller must provide a quality passport and a certificate of conformity;
  • the drying time is indicated on the condition that it is +25 degrees outside (the standard is 24 hours, but if this time is less, then very little solvent has been added to the modified bitumen, which is not very good).

Consumption per 1m 2 is also important for savings. Another question that worries buyers is whether to buy cold or hot mastic? Let's understand the difference between them.

Cold mastic is ready for use. The manufacturer may insist that it needs to be heated slightly, but the maximum temperature will be 40 degrees. It is good because it reduces the time of repair work and is not afraid of moisture. If it has recently rained, and the roof has not completely dried out yet, you can pour cold mastic to eliminate leakage, waterproofing, and repair soft tiles.

The hot applied material is very good, but requires safety regulations. The temperature reaches 150-200 degrees.

In addition to buying ready-made material, you can make liquid hot bitumen yourself.

Self-cooking

To prepare the solution you will need:

  • old metal bucket;
  • materials for lighting and maintaining a fire;
  • bricks;
  • bitumen;
  • gasoline (if necessary);
  • a strong wooden stick for stirring.

First you need to build a fire. Now, hanging a bucket over it, put bitumen in it. The material will slowly melt under the influence of high temperatures. The mixture must be stirred from time to time.

If the mastic is very thick, gasoline is added to it. The consumption of the final product will be small.

The process of self-production and application is shown in the video.

Repair work

Depending on what a visual inspection of a soft roof shows, repairs are divided into:

  • emergency (waterproofing process in the presence of leaks);
  • small (seal of cracks and seams);
  • capital.

For minor repairs, small pieces of roofing material, soft tiles or other material are needed. First, the crack is filled with a liquid solution, then a piece of roofing material is glued, everything is squeezed and a new layer of bitumen is applied on top. For such work, the material consumption per 1 m 2 is minimal.

Emergency repairs require high-quality waterproofing. In case of leaks, it is required to apply mastic under the roofing material, after drying the area with a burner. The same method is used when the seams of the soft roof diverge. The consumption in this case is also small.

Overhaul is the most difficult of all, bitumen consumption here needs to be increased. The process itself can be divided into three stages:

  1. the damaged canvas is removed from the roof;
  2. modified bitumen is prepared according to the instructions;
  3. a layer of waterproofing (special material) is lined;
  4. using a solution, the roof is again covered with roofing material.

In cases where water lingers on the roof, it is filled with water without a canvas and this area is marked. After that, the liquid is driven off, the surface is dried and modified bitumen is applied, on it is a roofing material 1 mm thick. Now you can cover the roofing material.

Bituminous mastic is a wonderful material. Low consumption, efficiency, ease of use and high quality waterproofing have provided him with an impeccable reputation.

Mastic bituminous cold application for waterproofing and gluing roofing material: consumption and technical characteristics + Photo

This article will help you understand what cold-applied bituminous mastic is. What is the difference between cold and hot mastic. Where is it used. How to choose the right material by properties and qualities for the required work.

Bitumen is a hard resin used to make mastic. In order for the material to become plastic, its temperature is increased, which significantly increases the time of work and has a clear drawback - the risk of fire.

For this reason, it is much more convenient to use cold applied mastic. Due to the solvents present in the composition, the waterproofing material is in a liquid state and heating is not required for use.

Hot and cold mastics are used to achieve complete waterproofing. The solvent evaporates, the material solidifies. It turns out a high-strength waterproofing layer.

General information about bituminous mastic

There are two types of cold applied bituminous mastic

First view

It is made on the basis of solvents. These are ready-to-work mixtures. Solvent-based mastic is suitable for use at sub-zero temperatures.

This type of waterproofing sets within 24 hours. Complete curing of the mastic and the acquisition of waterproofing properties takes a week.
Typically, this type of material is used in roofing.

The second type of bituminous waterproofing coating

They are made on a water basis - which characterizes the material as not harmful to the environment.
The coating does not have a pungent odor, dries in a couple of hours.

Water-based waterproofing cannot be used at low temperatures. It is also worth storing the material in a warm room.

Bituminous mastic has different modifications

Unmodified waterproofing. The composition does not contain polymers and other components that enhance the properties of the material. For roofs, this view is not suitable, for the foundation it is ideal. The waterproofing applied to the foundation does not experience atmospheric overloads.

Mastic without polymers is not recommended for roofing.

Bitumen-polymer mastic. From the name of the material it is clear that this type of waterproofing is characterized by high performance. Perfectly adapted to a wide temperature range. Very good molecular bond (adhesion), which allows the mastic to be used for gluing roofing material and similar materials.

Bitumen-polymer mastic, due to its qualities, is widely used to cover flat roofs.

Bitumen-rubber mastic. The composition contains a crumb of rubber. It has decent anti-corrosion properties. Used to cover metal structures.

For roofing bituminous - rubber mastic is NOT suitable.

Bitumen-rubber waterproofing, it is also liquid rubber - very elastic with high physical and mechanical properties. These qualities increase the wear resistance of the coating. Great for roofing.

Rubber mastic can become an independent roofing. Virtually unaffected by the weather.

The type of mastic is directly related to the components contained in it.

One-component - ready-to-use coating.

Two-component mastic before starting work requires mixing with a hardener. Used for professional purposes. Has good performance.

When using a two-component mastic, it is IMPORTANT to follow the mixing instructions exactly. Incorrect proportions will lead to an increase in the hardening time.

The main advantages of bituminous mastic of cold application

  • Reduces waterproofing time
  • Mastic can be diluted with a solvent, which will make it the desired consistency
  • Service life more than 25 years
  • The coating can be applied on surfaces made of different materials
  • Easy application.
  • Self use

Cons of this material

  • High price.
  • Bituminous - polymer mastic gives a large shrinkage, which affects the consumption of material.

Application

Bituminous mastic of cold application material consumption:

  1. For bonding 0.8 – 1 kg per square meter
  2. For waterproofing layer 2 - 3.8 kg per square meter

There are two leading manufacturers in the market:

  1. Bituminous mastic TECHNONICOL
  2. Bituminous mastic EXPERT

Both manufacturers meet all requirements. There may be a difference in cost. And some nuances, such as material consumption and drying time.

Important to remember. Before applying the mastic, it is necessary to clean the surface of debris, dirt. The area to be treated must be dry. If the surface is porous, it must be pre-treated with a primer.

Bituminous mastic for the roof

In construction, bitumen-based building materials are now often used. In particular, bituminous roofing, bitumen tape for roofing, as well as various polymer-bitumen-based sealants.

Bituminous mastic for roofing has received wide use - it is made on the basis of bitumen, it allows you to simply and efficiently perform waterproofing and repair of the roof. Roofing mastics are well resistant to aggressive environments. One of their main advantages is that they can stretch and shrink without any consequences, they are applied evenly on the roof of any configuration, the work is performed seamlessly. Thanks to these properties, the coating is reliable and durable.

Bituminous mastics used for roofing work are of the following types.

cold application

bituminous mastic expert

Cold bituminous mastic is a ready-to-use composition, although it can be diluted with various solutions if necessary. It can be applied even on a wet coating, which allows you to perform work without special training and in the shortest possible time.

hot application

Water based

The most environmentally friendly, because the content of toxic substances in them is minimal. They are easy to use and safe.

Bituminous mastics with special additives and fillers (plasticizers, minerals, etc.) have some specific properties:

Rubber mastic and polyurethane - the most elastic, they include rubber or polyurethane.

  • Bitumen-latex - very durable with increased water resistance, contain synthetic binders and mineral fillers (latex, asbestos, mineral wool fibers, modifiers).
  • With an oil solvent - does not harden, it is usually used on objects with constant vibration.
  • Rubber-bitumen - does not lend itself to stretching, shock and vibration, easily adheres to any surface.

rubber-bitumen mastic of cold application

Rubber-bitumen mastic is more often used for cars, but it is also successfully used for roof repairs.

Now consider the use of various types of bituminous mastics for roof repair.

Soft roof repair

Repair with a patch. Bituminous roof mastic is usually applied by hand with a spatula or brush, sometimes with a spray gun. The surface of the roof to be repaired is cleaned of dirt (rust or old paint can not be cleaned) and covered with mastic, then a patch is applied. Bituminous tape, tarpaulin, etc. can be used for the patch. The patch must be pressed firmly against the surface so that no air gap remains. On top, you can apply another protective layer of mastic.

Roof repair with bituminous mastic and roofing tape. Bituminous roofing tape is commonly used to repair soft rolled roofs. This tape is multi-layered - it has a protective layer of aluminum foil, a layer of bitumen with plasticizers and a layer of polyethylene film. It adheres well to various materials. Good quality tapes do not contain harmful chemical additives, are resistant to tearing and puncture, their protective reinforced surface is resistant to pollution, acids, alkalis and other aggressive environments. Such tapes are very easy to use and do not require special skills to use. We will analyze in detail the method of repair using bitumen tape.

bituminous mastic for soft roof repair

First you need to clean the place of leakage and the space around it from contamination, rinse thoroughly with water or detergent solution, and allow to dry completely. Lubricate the leakage contour with bituminous mastic or primer. Next: remove the protective film from the tape from the adhesive side. Then, using a pressure roller, fix the tape on the roof surface, cut off along the edge.

Flash repair. The roof surface is cleaned, treated with a primer, degreased if necessary, cracks are sealed with a moisture-resistant cement-based putty. Next, two layers of mastic are applied, then reinforced geotextiles are laid and a protective layer of mastic is laid on top.

Hard roof repair

Repair of corrosive areas. To repair a hard roof, hot mastic is usually used. First you need to clean the rust, clean the surface of dirt, then apply a layer of hot bituminous mastic.

Repair with a patch. First, we prepare a patch of the required size from a dense material (tarpaulin, burlap), then we impregnate it with a mastic composition and fix it in the place to be repaired, leave it to dry well. Then we apply another layer of mastic on top. This method is good to use for sealing interlocking surfaces.

Approximate consumption of bituminous mastic per 1 m

The consumption of mastic depends on its type and is often indicated in the description of the composition.

Hot applied mastics do not shrink much. To apply bituminous mastic with a layer about 2 mm thick, approximately 2.2 kg / m 2 of the composition will be required.

Typically, ready-to-use mastics shrink and about 3.6 kg/m 2 of composition is needed to create a 2 mm layer.

consumption of bituminous mastic per square meter

If necessary, to reduce consumption, the composition can be slightly diluted. So how to dilute the bituminous mastic? Bitumen mastic can be diluted with white spirit, solvent, toluene, kerosene, etc. For safe dilution, you need to carefully read the manufacturer's instructions for working with the composition.

Bituminous sealants for roofing

In some, especially in problematic or hard-to-reach areas of the roof, it is better to use specialized sealants to better achieve the waterproofing effect. Bituminous roofing sealant is a special viscous compound made from modified bitumen. It is quite toxic and is only used for outdoor work. It is well resistant to moisture, ultraviolet, various oils, solvents, gasoline. Bituminous sealant is applied at temperatures above freezing, usually in several coats. For repairing roofs on small surfaces, rubber-bitumen sealant is well suited, because it is vapor- and waterproof, very elastic.

Thus, summing up, we can say that bitumen has been widely used for roofing, as it has very good operational and consumer properties. Bituminous materials of the desired type can be easily bought at the store or made by yourself. Their use does not require complex preparatory activities, special tools or extensive experience. However, when carrying out repair work, some attention should still be paid to their choice. Sometimes different types of roofing can have their own specifics. If you are at a loss with the choice of materials for repairing your roof, then it is better to use only universal quality products. New materials allow you to repair the roof quickly and efficiently.

From this video you can learn more about roof repair with cold-applied bituminous mastic:

Cold applied bituminous mastic - the main points that you did not know about

What is cold bituminous mastic? How is it different from hot, and for what purposes can it be used? I will talk about the main properties of this insulating material and its scope. This will allow you to choose the most suitable waterproofing option for yourself.

Mastic bituminous cold application - universal modern waterproofing material

What is the material

General information

Bituminous mastic is a plastic material made on the basis of bitumen. The latter is a hard resin. Therefore, the bitumen-based mixture is heated before use.

Hot applied mastics are not very convenient to use. The need for heating increases the time of waterproofing work, and also increases the fire hazard.

Therefore, analogues of cold application have recently become more popular. They contain solvents, as a result of which they are sold in liquid form and do not require heating.

In the photo, cold applied mastic is a liquid waterproofing material ready for application.

The principle of operation of such compositions is similar to paints and varnishes - after application to the surface, the solvent evaporates and the coating hardens. The result is a durable waterproofing layer.

Compound. Bituminous mastics of cold application, depending on the composition, are divided into two types:

  • Solvent based. Ready-to-use mixtures that can be handled even at sub-zero temperatures.
    Drying of the coating occurs a day after application. True, the material acquires its final properties only a week after application.
    As a rule, solvents are used in the manufacture of roofing mastic, however, this waterproofing material can be used for other purposes. I'll cover the possible use cases in more detail below;

Water-based bituminous water-based mixture is environmentally friendly

  • Water based. This cold-applied mastic is an aqueous emulsion. As a result, it is odorless and environmentally friendly.
    In addition, the water-based coating dries faster - usually it takes several hours. True, it can only be used at positive temperatures, the same applies to the storage of material.

Modifications. Depending on the initial components that are used in the composition, the material in question is divided into the following types:

  • Not modified. These coatings do not contain polymers and other improving additives. Therefore, they are not recommended for roofing, but at the same time they are excellent for waterproofing foundations, where they are not subjected to strong temperature changes and heat;

Unmodified composition can be used for foundation waterproofing

  • Bitumen-polymer. Polymers are usually modified bituminous roofing mastic. It tolerates heat and temperature changes well.
    Another of its positive qualities is increased adhesion. Due to this, the composition can be used for gluing roll materials;

The bitumen-polymer coating is not afraid of high temperatures, which allows it to be used for waterproofing flat roofs

  • Bituminous rubber. They differ from the addition of crumb rubber to the composition. As a rule, they are used for waterproofing metal building structures, as they have good anti-corrosion properties. For roofs, this waterproofing material is not used;
  • Bituminous-rubber. This coating is characterized by increased elasticity, as well as excellent physical and mechanical properties, therefore it is also called liquid rubber. Such compositions are great for roof repairs.
    In addition, due to their high efficiency, durability and weather resistance, they can be used as an independent roofing.

Before applying a waterproofing coating, regardless of its type, the surface must be carefully prepared - cleaned of foreign debris, dust and dirt, and then dried thoroughly. In addition, it is desirable to pre-apply a bituminous primer.

Depending on the number of components, bituminous coatings are divided into two types:

  • One-component. Represent a completely ready-to-use coating;
  • Two-component. Must be mixed with hardener before use. These compositions are professional and have higher characteristics.

When mixing the two components, it is extremely important to maintain the correct proportions, otherwise the hardening time of the coating may increase dramatically. Instructions for mixing the components are available on the packaging.

Key qualities

As I said above, unlike hot bituminous mastic, the analogue for cold application is convenient to use and speeds up waterproofing work. But besides this, it has many other advantages:

  • Possibility of obtaining any consistency. To do this, the required amount of solvent is added to the composition;
  • Durability. This quality applies primarily to modified compositions, the service life of which exceeds a quarter of a century;

Modified bituminous mix can last over 25 years on a roof

  • Versatility. Mastic can be used for waterproofing a wide variety of surfaces;
  • Ease of application. The coating is easy to apply with your own hands using a roller, spatula or brush.

disadvantages. The disadvantages include only a higher cost, the bituminous polymer mastic is especially expensive. In addition, this waterproofing shrinks more strongly than its hot-applied counterpart, which increases its consumption.

The consumption of mastic depends on the type of work. Bonding usually requires 0.8 to 1 kg/m 2 of coating per square meter. To create a waterproofing layer per square meter, it takes 2 to 5 kg of the composition.

%D0%96%D0%B8%D0%B4%D0%BA%D1%83%D1%8E%20%D0%B3%D0%B8%D0%B4%D1%80%D0%BE%D0%B8 %D0%B7%D0%BE%D0%BB%D1%8F%D1%86%D0%B8%D1%8E%20%D0%BD%D0%B0%20%D0%BE%D1%81%D0 %BD%D0%BE%D0%B2%D0%B5%20%D0%B1%D0%B8%D1%82%D1%83%D0%BC%D0%B0%20%D0%BF%D1%80 %D0%B8%D0%BC%D0%B5%D0%BD%D1%8F%D1%8E%D1%82%20%D0%B4%D0%BB%D1%8F%20%D0%BF%D1 %80%D0%B8%D0%BA%D0%BB%D0%B5%D0%B8%D0%B2%D0%B0%D0%BD%D0%B8%D1%8F%20%D1%80%D1 %83%D0%BB%D0%BE%D0%BD%D0%BD%D1%8B%D1%85%20%D0%BC%D0%B0%D1%82%D0%B5%D1%80%D0 %B8%D0%B0%D0%BB%D0%BE%D0%B2

%D0%9E%D0%B1%D0%BB%D0%B0%D1%81%D1%82%D1%8C%20%D0%BF%D1%80%D0%B8%D0%BC%D0%B5 %D0%BD%D0%B5%D0%BD%D0%B8%D1%8F

%0A

%D0%9A%D0%B0%D0%BA%20%D0%BF%D1%80%D0%B0%D0%B2%D0%B8%D0%BB%D0%BE,%20%D0%BF% D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5%20%D0%B1%D0%B8%D1%82% D1%83%D0%BC%D0%BD%D1%8B%D1%85%20%D0%BC%D0%B0%D1%81%D1%82%D0%B8%D0%BA%20%D0% BE%D0%BF%D1%80%D0%B0%D0%B2%D0%B4%D0%B0%D0%BD%D0%BE%20%D0%B2%20%D1%81%D0%BB% D0%B5%D0%B4%D1%83%D1%8E%D1%89%D0%B8%D1%85%20%D1%81%D0%BB%D1%83%D1%87%D0%B0% D1%8F%D1%85:

    %0A
  • %D0%94%D0%BB%D1%8F%20%D0%BA%D1%80%D0%BE%D0%B2%D0%B5%D0%BB%D1%8C.%20%D0%9C%D0%B0%D1%82%D0%B5%D1%80%D0%B8%D0%B0%D0%BB%20%D0%BF%D1%80%D0%B8% D0%BC%D0%B5%D0%BD%D1%8F%D0%B5%D1%82%D1%81%D1%8F%20%D0%BF%D1%80%D0%B8%20%D0% BE%D0%B1%D1%83%D1%81%D1%82%D1%80%D0%BE%D0%B9%D1%81%D1%82%D0%B2%D0%B5%20%D0% BC%D0%B0%D1%81%D1%82%D0%B8%D1%87%D0%BD%D1%8B%D1%85%20%D0%BA%D1%80%D0%BE%D0% B2%D0%B5%D0%BB%D1%8C%20%D0%B8%20%D1%80%D0%B5%D0%BC%D0%BE%D0%BD%D1%82%D0%B5% 20%D0%BA%D1%80%D0%BE%D0%B2%D0%B5%D0%BB%D1%8C%D0%BD%D0%BE%D0%B3%D0%BE%20%D0% BF%D0%BE%D0%BA%D1%80%D1%8B%D1%82%D0%B8%D1%8F.%20%D0%9A%D1%80%D0%BE%D0%BC%D0 %B5%20%D1%82%D0%BE%D0%B3%D0%BE,%20%D1%81%D0%BE%D1%81%D1%82%D0%B0%D0%B2%20% D0%BF%D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D1%8F%D1%8E%D1%82%20%D0%B4%D0%BB%D1%8F% 20%D0%BF%D1%80%D0%B8%D0%BA%D0%BB%D0%B5%D0%B8%D0%B2%D0%B0%D0%BD%D0%B8%D1%8F% 20%D0%BC%D1%8F%D0%B3%D0%BA%D0%BE%D0%B9%20%D1%87%D0%B5%D1%80%D0%B5%D0%BF%D0% B8%D1%86%D1%8B%20%D0%B8,%20%D0%BA%D0%B0%D0%BA%20%D1%8F%20%D1%83%D0%B6%D0%B5 %20%D0%B3%D0%BE%D0%B2%D0%BE%D1%80%D0%B8%D0%BB%20%D0%B2%D1%8B%D1%88%D0%B5,% 20%D1%80%D1%83%D0%BB%D0%BE%D 0%BD%D0%BD%D1%8B%D1%85%20%D0%BF%D0%BE%D0%BA%D1%80%D1%8B%D1%82%D0%B8%D0%B9;
    • %0A
  • %D0%93%D0%B8%D0%B4%D1%80%D0%BE%D0%B8%D0%B7%D0%BE%D0%BB%D1%8F%D1%86%D0%B8%D1 %8F%20%D1%84%D1%83%D0%BD%D0%B4%D0%B0%D0%BC%D0%B5%D0%BD%D1%82%D0%BE%D0%B2.%20%D0%92%20%D1%8D%D1%82%D0%BE%D0%BC%20%D1%81%D0%BB%D1%83%D1%87%D0%B0%D0%B5 %20%D0%BF%D1%80%D0%B8%D0%BC%D0%B5%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5%20%D0%B1%D0 %B8%D1%82%D1%83%D0%BC%D0%BD%D1%8B%D1%85%20%D1%81%D0%BE%D1%81%D1%82%D0%B0%D0 %B2%D0%BE%D0%B2%20%D1%82%D0%BE%D0%B6%D0%B5%20%D0%B4%D0%BE%D1%81%D1%82%D0%B0 %D1%82%D0%BE%D1%87%D0%BD%D0%BE%20%D0%BE%D0%B1%D1%88%D0%B8%D1%80%D0%BD%D0%BE %20-%20%D0%BE%D0%BD%D0%B8%20%D0%BC%D0%BE%D0%B3%D1%83%D1%82%20%D0%B8%D1%81% D0%BF%D0%BE%D0%BB%D1%8C%D0%B7%D0%BE%D0%B2%D0%B0%D1%82%D1%8C%D1%81%D1%8F%20% D0%BA%D0%B0%D0%BA%20%D0%B4%D0%BB%D1%8F%20%D0%B3%D0%BE%D1%80%D0%B8%D0%B7%D0% BE%D0%BD%D1%82%D0%B0%D0%BB%D1%8C%D0%BD%D0%BE%D0%B9%20%D0%B3%D0%B8%D0%B4%D1% 80%D0%BE%D0%B8%D0%B7%D0%BE%D0%BB%D1%8F%D1%86%D0%B8%D0%B8,%20%D1%82%D0%B0%D0 %BA%20%D0%B8%20%D0%B2%D0%B5%D1%80%D1%82%D0%B8%D0%BA%D0%B0%D0%BB%D1%8C%D0%BD %D0%BE%D0%B9%20(%D0%BD%D0%B0%D1%80%D1%83%D0%B6%D0%BD%D0%BE%D0%B9%20%D0%B8% 20%D0%B2%D0%BD%D1%83%D1%82%D1%80%D0%B5%D0%BD%D0%BD%D0%B5%D0%B9).%20%D0%9F% D1%80%D0%B8%D1%87%D0%B5%D0%B C,%20%D0%B8%D0%BC%D0%B8%20%D0%B3%D0%B8%D0%B4%D1%80%D0%BE%D0%B8%D0%B7%D0%BE %D0%BB%D0%B8%D1%80%D1%83%D1%8E%D1%82%20%D0%BD%D0%B5%20%D1%82%D0%BE%D0%BB%D1 %8C%D0%BA%D0%BE%20%D0%BB%D0%B5%D0%BD%D1%82%D0%BE%D1%87%D0%BD%D1%8B%D0%B5%20 %D1%84%D1%83%D0%BD%D0%B4%D0%B0%D0%BC%D0%B5%D0%BD%D1%82%D1%8B,%20%D0%BD%D0% BE%20%D0%B8%20%D1%81%D0%B2%D0%B0%D0%B9%D0%BD%D1%8B%D0%B5;
    • %0A
%0A

Bitumen-based material can be used for horizontal waterproofing of a strip foundation

  • Floor waterproofing. It is allowed to use mastic under the screed. In addition, the material is used for waterproofing basement floors, as well as balcony slabs.
    Often this waterproofing is used for bathrooms, garages, etc.;
  • Installation of waterproofing pools and terraces. As a rule, liquid rubber is used for these purposes.

Roof waterproofing with the material in question can be carried out provided that the slope angle does not exceed 30 degrees. The exception is liquid rubber, which can be applied to any surface.

Price

The prices shown in the table are valid in the spring of 2017:

Conclusion

We figured out with you what cold-applied bituminous mastic is, what types of it exist, and what qualities they possess. Watch the video in this article for more. If you have any questions - write in the comments.

Bituminous roofing is a modern and high-quality material that is resistant to external influences. Unlike the old types of coating, which can serve no more than 5-10 years, the current varieties show a much longer resource.

This is due to the use of a multi-layer material, which is based on durable and load-resistant fabrics, and the binding layer is modified bitumen.

The advantages of such coatings are usually attributed:

  • strength, ability to withstand all operational loads
  • durability - most materials last up to 30 years
  • tightness, resistance to moisture
  • fastening density to the base, which does not allow gusts of wind to tear off the coating canvas
  • high sound insulation and heat-saving qualities
  • maintainability, the ability to restore small parts without replacing the entire coating

The disadvantages of bituminous roofing are:

  • most varieties need to create a substrate, which increases the cost of the entire roof
  • installation requires appropriate conditions. In particular, installation must not be carried out at temperatures below +5°C.

The disadvantages of bituminous roofing are not so noticeable that users refuse to use it. The demand for the material is stable, and a wide choice allows each buyer to get the best option.

Roof device: pie

Experts call a roofing cake a multi-layer package of materials laid under the topcoat.

It usually includes:

  • vapor barrier. Most often, this is an ordinary polyethylene film.
  • heat insulator. Soft or hard types of mineral wool, foam, sprayed types, etc. can be installed.
  • waterproofing or vapor barrier membrane. It is able to pass water vapor in one direction, ensuring the dryness of the insulation.

After these layers, a ventilation gap is installed, formed by slats. A solid flooring of OSB, plywood or other sheet materials is laid on top of it. A lining carpet is laid on it, after which a bitumen roof is mounted.

There is another design option. If, there is no need for a heater. Therefore, the composition of the cake is much simpler - a solid flooring is laid directly on the rafter legs, then a lining carpet and a finish coat follow.

Types of bituminous roofing, pros and cons, cf. price per sq. m.

The name "bituminous roofing" is the general name for a fairly extensive group of coatings. All of them have their own characteristics and properties. Among them are roll and piece types of material. The first ones include:

Rolled

Ruberoid

This is the oldest type of bituminous coating, and is currently only used on outbuildings or for waterproofing some structures during construction.

Uniflex

It is a coating with a solid base and modified bitumen as a binder layer. A layer of mineral topping is applied on top of it, which does not allow the layers in the roll to stick together.

glassine

It is a kind of roofing material, it is not used as a roofing sheet.

bipol

The fiberglass backing is impregnated with UV-resistant modified bitumen. There is a layer of mineral topping on top.

linocrom

This is a fiberglass base coated with bitumen pasting.

piece

bituminous tiles

Bituminous tiles are referred to piece types of bituminous roofing. It is produced in the form of separate sheets (shingles), which are overlapped on the substrate and form a continuous and hermetic coating.

A feature of bituminous tiles is the ease of installation and ease of installation on pitched roofs, which greatly expanded the scope.

Prices

Prices for bituminous roofing are relatively low, but the overall price is quite high. Due to the need to install the substrate, the cost of 1 sq. m. coverage ranges from 400 ₽ to 3500 ₽.

List of types of bituminous roofing TechnoNIKOL

TechnoNIKOL is a leading supplier to the domestic market. Bituminous roofing is not the main, but a very important area of ​​production. The range of materials is very wide and includes the following types:

  • rolled materials (roofing material, glassine, uniflex, bipole, linocrom)
  • piece materials - bituminous

The flexible tile is presented by a wide choice of materials. They are combined into groups (collections) that have several color options:

  • Atlantic
  • Continent
  • Western
  • Country
  • Ranch
  • Foxtrot
  • Samba
  • Rumba
  • Modern
  • Tango
  • Quadrille
  • Flamenco
  • salsa
  • Bolero
  • Chord
  • Sonata

Between themselves, these collections differ in a set of color schemes and the shape of the cutouts on the sheets. There are rectangular, jagged, wavy and other varieties. In the canvas, they form a peculiar pattern of the roof, reminiscent of traditional tiles.

Repair and auxiliary materials

In addition to roofing, TechnoNIKOL presents repair and auxiliary materials used during installation or restoration of the main coating. For example, bituminous mastic for roof waterproofing is used both for pre-treatment and in repair work.

In order to choose the most suitable type of bituminous roofing, it is necessary to carefully analyze the conditions of its operation:

  • temperature range
  • solar intensity
  • the possibility of mechanical influences
  • amount and intensity of precipitation. In particular, the amount of snow in winter and the frequency of its removal
  • strength of winds, possibility of hurricane gusts
  • the complexity of the roof configuration
  • other features

Given these criteria, the most durable and resistant to all expected impacts of the material is selected. It is important to understand that roll webs are generally less stable than piece materials. In addition, flexible tiles are much more convenient to repair, able to adhere tightly and firmly to the substrate.

An additional criterion will be the method of installation. If self-installation is planned, more expensive materials can be considered, but if hired installers are involved, the cost of coating will increase installation prices.

Stages of installation and installation

The order of installation work is described in detail in the manual that comes with the material. It must be carefully studied, since each coating has some features or nuances in the installation. Procedure:

Foundation preparation

Solid flooring must be free of dirt, debris and dust. It is necessary to make sure that it is assembled correctly, that there are ventilation gaps and other necessary elements. If shortcomings are noticed, they must be eliminated immediately - then there will be no possibility.

Underlayment carpet laying

It is produced parallel to the cornice line. On flat roofs or with a small angle of inclination, it is mounted over the entire area. On roofs with large angles of inclination of the slopes, they often manage to lay the carpet only in the valleys, at the transitions of the planes and other critical areas. Installation is carried out on roofing nails, all overlaps and joints are treated with bituminous mastic.

Installing slats

Installation of end and cornice strips around the perimeter of the entire roof. They are nailed on top in a zigzag pattern.

Shingles installation

Laying shingles (sheets) starts from the middle of the eaves and goes to its ends. It is recommended to mix sheets from several packs together.- this will help to achieve a uniform color of the entire roof.

Shingles (more precisely, their lower edge - petals) are fixed at a distance of 1 cm from the edge of the cornice and fixed with roofing nails so that their caps are subsequently hidden by other sheets.

  • the next rows are fastened so that the cutouts of the lower row fall in the middle of the petals of the upper one. When the installation approaches the ends, the shingles are cut to size and glued to the cornice strips on the mastic
  • the ridge part is laid either with the same shingles with cut petals, or using metal or plastic ready-made elements from metal tiles

The installation procedure is simple, but requires accuracy and thoroughness. If the eye fails, it is recommended to make markings in order to be guided by it when installing subsequent rows of bituminous roofing.

Bituminous mastic

Bituminous mastic for roofing applied to joints, sheet overlaps or other critical areas. Sometimes it is applied with a continuous coating over the entire area of ​​\u200b\u200bthe roof. This makes installation more expensive, but provides high-quality waterproofing of the surface.

The material is poured on a continuous floor and evenly distributed over the entire area. Before applying the mastic is thoroughly mixed in a container. If it is too thick, heating up to a temperature of 60-80 ° C is allowed. Hot material must be used quickly, as it quickly cools down during application and loses fluidity.

bituminous tape

Bitumen tape for roofing is a strip of material with a sticky layer applied, covered for the time being with a film. used for sealing joints, protecting joints, insulation adjoining the canvas to the cornice or wind slats.

This strengthens the cover and prevents the wind from tearing it off in a sudden gust. Another way to use is to seal cracks, seams, gaps during repair work. It is noteworthy that the bitumen tape does not have to be used in conjunction with bituminous coating, it lies on, ondulin, and other types of roofing.

bituminous sealant

Bituminous roofing sealant is used to process adjoining, nodes of passage through the roof and other critical areas.

Loading...
Top