Making a table fountain with your own hands. Do-it-yourself fountain at home. Shapes and sizes

In specialized stores today you can buy very original indoor fountains. The range of such goods is quite large, as they say, for every taste and color. Many people like it when the murmur of a small trickle of water is heard in the house. These sounds allow you to relax and calm down after a hard day's work. However, most consumers do not know what can be done. At the same time, special costs are not required, as well as knowledge.

Construction material

So, below we will describe how to make a fountain at home. To create an original design you will need:

1. Glue.
2. A container that will serve as the basis for the fountain.
3. Approximate scheme of the fountain
4. Large sink.
5. A small piece of hose commonly used for cleaning aquariums.
6. Polyethylene film.
7. Expanded clay, decorative multi-colored soil and shells various forms and sizes.

A large sink will serve as the central detail of the entire composition. A pump and a hose are needed for pumping water, and multi-colored soil, shells and expanded clay are for decoration. In addition, you need a small piece polyethylene film. So, expanded clay can be purchased at any flower shop. As for the soil black, red, and it is better to use a special mixture for aquariums.

We select the capacity

A home fountain should be strong enough and at the same time beautiful. Therefore, the container for its base should be selected more carefully. The first step in the manufacture of a structure is the selection of a vessel. For the fountain this case you can take a flower pot. If there is no such container, then you can use a flower pot, a beautiful basin, a clay vase, and so on.

The most important thing is that the vessel does not leak. If, for example, in flower pot there are holes, they should be sealed with epoxy glue.

Choosing a pump

Since everyone can make a fountain at home, it’s worth Special attention give to the pump. After all, not everyone understands them. There are several with a spray tip and a regular one. In this case, the first option is not suitable. First of all, splashes can get outside the main tank. And one more thing - we have a completely different idea.

Therefore, to make a mini-fountain with your own hands, an ordinary pump will be enough. The tip can be made by yourself. In this case, the pump should simply raise the jet up.

First stage

So, how to make a fountain at home at no extra cost? First you need to cut off a small piece of hose, about 10 centimeters long. After that, you need to put it on the pump tip and see if the hole in it is completely open. It is on this that the power of the jet that will be supplied to the fountain depends. The finished structure should be installed at the bottom of a pre-prepared container.

The home fountain in this case will be with a large sink in the center. This is where the water will come out. Therefore, it is necessary to make a hole in the sink that will fit the hose in size. This can be done with a conventional drill. Of course, the sink should be drilled carefully so that its walls do not crack.

Stage two

The layout of the fountain is quite simple. With its help, everyone will be able to assemble a similar decoration for their interior. When the pump is installed in the tank, expanded clay can be poured, which must be covered with polyethylene from above. A hole for the hose should be made in advance in the film.

Polyethylene is necessary so that expanded clay does not float when wet. After all, water will be poured into the container. After that, multi-colored aquarium soil should be poured onto the film.

Washbasin stand

The composition will not look if the main element is simply set on pebbles. Therefore, you should make a neat stand. So, how to make a fountain at home, which will not only soothe with the pleasant sounds of flowing water, but also be a wonderful addition and highlight of the interior? A beautiful stand can be created from pebbles. They can be held together with epoxy glue. When making the stand, do not forget about the hole for the hose.

Assembling the structure

When the stand is ready, a hose should be passed through it. If it is too long, then it needs to be shortened. Otherwise, you will see where the water is coming from. Now you can install the main element - a large sink. In the previously made hole, stretch the hose just one centimeter.

That's all, it remains to decorate the fountain. To do this, pour some shells around the sink and put the most beautiful pebbles. All this can be purchased in the store - for lovers aquarium fish or as a gift.

If there is no large sink, then it can also be replaced with any suitable item. The main thing is that you can make a hole for the hose in it. The design of a decorative fountain for a room depends entirely on the imagination of its creator.

The final stage

After the composition is completely folded and all its elements are fixed, it is necessary to pour water into the container. There is no point in completely submerging the soil. So the fountain will lose the main idea and its charm. The most important thing is that the pump is completely hidden under water.

Now you can turn on the fountain. To do this, plug the cable from the pump into the outlet.

That's all, homemade fountain ready for the room. However, it is worth remembering that the water from it will gradually evaporate, especially in the hot season. Therefore, it will be necessary to add liquid to decorative fountain at least once a week. More often if necessary.

You can mask the cable from the pump to the outlet. In addition, the indoor fountain can be decorated with artificial flowers. This will give the composition a more effective look.

Finally

Now you know how to make a home fountain. It does not require large expenses and special talents to create it. Enough to turn on the fantasy. It doesn’t take much time to make such compositions, but they will delight you for more than one year.

It seems to many that making a fountain is very difficult. Perhaps there is some truth in this. But do it yourself with your own hands mini fountain absolutely real and within the power of almost everyone. It can decorate your garden or even become part of the interior of your home. Consider how you can make the original mini fountain from clay pots of various sizes.

In order to get started, you need to prepare all the necessary materials:

Two clay pots of different sizes.

Five clay pot holders. Two should match the diameter of the pots, and it is preferable to take three smaller than the first.

A large clay stand for the base of the entire mini-fountain. It should be with sufficiently high edges.

Small fountain pump.

Hose of appropriate diameter.

Waterproof silicone-acrylic lacquer with a wet stone effect for outdoor use, which can be in the form of spray cans.

Drill with a drill equal to the diameter of the hose.

File.

Silicone adhesive sealant.

Pebbles for decoration mini fountain.

Fresh flowers in a pot for decoration mini fountain.

Fig.1 Necessary materials for mini fountain

Fig. 2 More materials for a mini-fountain

When all the materials are prepared, you can get to work.

1. We prepare pots and coasters. To do this, cover them with waterproof varnish and let dry.

2. After that, using a drill, we drill a hole in the center in the largest pot and the corresponding stand.

Fig. 3 Preparing pots and stands for a mini fountain

4. The next step is to process the edges drilled hole in a pot and stand, so as not to damage the hose. Also on the edge of the same pot we cut small hole to exit the wire from the pump.

Fig. 4 We continue to prepare pots and stands for a mini-fountain

5. Next, put the hose on the pump and thread it through the pot from its inside, and bring the wire into the prepared hole on the edge of the pot. pump way for mini fountain should be under the pot.

Fig. 5 We prepare the pump for the mini-fountain

6. We put a prepared stand with a hole on the hose sticking out of the inverted pot. Then we cut off the excess, leaving 1-1.5 centimeters of the hose coming out.

Fig. 6 Preparing a hose for a mini-fountain

8. After the sealant has hardened, cover it on top with a stand of the appropriate size with a prepared hole for draining water.

9. Then we put a smaller pot next to it, which will act as a step for our mini fountain. We put an appropriate stand on top of it.

Pay attention to the places for draining the formed reservoirs. The lowest and last level will consist of two stands, which should also have a drain.

Fig. 7 Installing pots and stands for a mini-fountain

10. The main structure of a small do-it-yourself fountain ready. Next, you should pour water into its base to the brim and try out how everything works. To do this, plug in the pump for mini fountain and adjust the arrangement of pots and coasters as you like.

Even the smallest pond is able to decorate your own summer cottage and give it a twist. And a do-it-yourself fountain will not only become a favorite place to relax and provide aesthetic pleasure, but will also become an occasion for compliments from invited guests.

But not everyone decides on the construction of this mysterious hydraulic device. Some summer residents mistakenly believe that the construction of a fountain is a laborious and expensive process, and one cannot do without the help of specialists in this matter. But every fan of spending time in nature can give himself such pleasure, the main thing is to know all the nuances of building a fountain with his own hands.

SELECTING THE TYPE OF THE FOUNTAIN

There are two types of fountains according to the type of construction.

1. The open version involves the supply of water to the nozzle. The formation of a jet in this version of the device occurs due to changes in the water level. The water pressure in this case is weak, so it is necessary to constantly monitor the water level. In addition, the water in such a fountain quickly becomes contaminated. To create it, you need to install a small tank at a height of about one meter above the nozzle.
2. A fountain with pump installation is the most practical and effective option. Thanks to the placement on the bottom of the pump, continuous circulation of water is ensured. Here, the pressure is stronger and the visual effect is more beautiful.

By design, pumps that act as fountains are divided into submersible and surface (stationary).

THE OPTIMUM PLACE FOR THE FOUNTAIN

When choosing a convenient place for the construction of a fountain, it is recommended to take into account the degree of slope of the earth. If the area is uneven, it is better to place similar decoration in the lowland. This option for the location of the reservoir will allow not only to adjust the volumes ground water, but will increase the oxygen saturation of the air.

• too close to the house so that moisture in windy weather does not get on the walls;
• in open areas, in order to prevent water from blooming due to sunlight on the pond;
• next to the trees so that the leaves, seeds, fluff falling from them do not clog it, and the roots do not damage the waterproofing.

The fountain should be located in such a way that it is not an obstacle on the way to other buildings and is visible from all points. It is recommended to place the structure near the resting place.

The minimum distance that must be maintained between the fountain and plants, buildings, furniture is 50 cm. So the plants will not die from excessive moisture, and the furniture will not become unusable. Perfect option for the location of the fountain - partial shade and a place protected from the wind, located in proximity to a source of water and electricity. This arrangement will save you from unnecessary wires and additional work for their isolation.

Having decided on the place, it's time to think about the shape and depth of the future fountain.

PREPARATION OF MATERIALS FOR CONSTRUCTION

To build a fountain in order to save money and effort, you can use the construction technology ornamental pond with the equipment of his pump.

Materials needed to build a fountain:

• fountain container;
• pumping station;
• durable film;
• bayonet shovel;
• natural stones of various sizes;
• sand, gravel;
• decorative elements.

TANK SELECTION AND INSTALLATION

If you plan to build a miniature fountain, you can use an ordinary plastic basin or any other small container as a reservoir.

For large reservoirs, old bathtubs or a self-dug pit are suitable. If a bath is used, it is necessary to dig a hole of such a size that its edges are not higher than the ground. All holes are securely sealed in the bath, after which it is lowered into the pit and strengthened with earth, stones and sand.

For a homemade tank, a hole is made of the required depth and covered with a dense, high-quality film, which is fixed along the edges on the surface with stones. Stones of various shapes and sizes are also poured to the bottom. It is important that the stones do not have sharp edges and cannot cut through the film. The stones are evenly distributed over the entire bottom of the future fountain.

SELECTION OF A PUMP FOR CONSTRUCTION OF A FOUNTAIN

In order to construct a fountain on the site on your own, it is not necessary to purchase expensive materials, you can adapt any old elements. However, you should not spare money - the pump, the better it is, the more beautiful the fountain will turn out and will decorate the site for longer without causing problems.

Submersible pump - best option for the construction of a fountain at their summer cottage. Works on the principle of a centrifuge. You can also install surface pump, it is mounted on the edge of a pond, but is most often used on large fountains and cascading ponds.

When choosing a pump, it is worth starting from the pressure that is constantly present in the pipe and the differences in this pressure. Therefore, buying the most powerful pump may not be justified, since not in all cases it will be able to work out its full power.

Regardless of which type of pump is chosen, it is important to remember that its power must be related to the diameter of the pipe. The jet of the fountain should come out under powerful pressure, and not slowly flow out of the pipe, since there will be no effect from such a design.

HOW TO MAKE A FOUNTAIN WITH YOUR HANDS: A STEP-BY-STEP INSTRUCTION

The construction of the fountain includes several main stages:

• pit preparation;
• fixing the trench;
• installation of a container or covering the bottom and edges with a film;
• installation of pumping equipment;
• fountain decoration.

FOUNTAIN WITH A POND FROM AN OLD TIRE

To build such a fountain you will need:

• an old tire from a truck or tractor;
• cement mixture, water, crushed stone and sand;
• container for mixing cement and a shovel;
• sealant;
• building level;
• mastic;
• stones;
• pump.

Stages of work:

VIDEO - FOUNTAIN FROM THE TIRE WITH YOUR HANDS

FOUNTAIN FOR COTTAGE USING FILM

For such a fountain you will need to prepare:

• thick film;
• shovel;
• sand;
• pump;
• stones different sizes without sharp corners.

Stages of work:

• we dig a hole, clear it of stones and tamp the bottom;

NEW LIFE FOR AN OLD BATH

For this version of the country fountain, you need to prepare:

• shovel;
• pebbles;
• pump equipment;
• bath;
• insulating tape;
• metal scissors;
• colored iron sheet;
• drill.

Stages of the construction of the fountain:

• we dig a pit corresponding to the size of the existing container;
• we put the bath inside and plug all the holes;

• we cut out wide strips from iron and lay them around the bath, close them with stones;

MINI FOUNTAIN FROM A PLASTIC BOTTLE

For this sprinkler you will need:

• plastic bottle;
• metal, strong wire or nail;
• insulating tape;
• garden hose.

Materials for a decorative fountain

Construction stages:

• decorate the pot with paints;
• make a small hole in the bottom of the pot;
• install a pump under the pallet;
• we drag the pump tube through the hole made in the pot;
• we fill the bottom with pebbles;
• decorate artificial plants and figurines;
• fill the pot with water.

VIDEO - DECORATIVE FOUNTAIN OWN HANDS

FOUNTAIN DECORATION

You can emphasize the uniqueness of a handmade fountain by decorating it. It is recommended to lay out beautiful, multi-colored stones of different sizes around the reservoir, put flowers in pots, place cute figurines of animals, birds, and so on.

In order for the fountain to amaze with its beauty and unusualness at night, you can make it illuminated with the help of special equipment. Lamps installed around the perimeter of the fountain and lighting at its bottom will create a fabulous, magical atmosphere.

The bottom of the reservoir can be planted with special plants, bushes can be planted around the fountain.

Any country pond and fountain, including, needs careful care. To maintain the order and transparency of the water, a pleasant spring appearance of the structure, it is necessary to regularly clean the tank. With the help of special devices, it is required to remove leaves, seeds, fluff and other objects from the surface of the water that can not only spoil the appearance of the reservoir, but also lead to a malfunction of the fountain.

At the end holiday season it is necessary to drain all the water, transfer the removable parts of the structure to a closed room, and cover the remaining parts and the bowl with a film so that dirt does not get into them.

Building a fountain with your own hands in a country house or even in an apartment is not difficult and does not require large financial resources. Before building a decorative fountain, you need to decide on the shape, size and installation location. There are many options for the location of such structures - at the gazebo, on the lawn, in the garden. After the construction of the fountain, you need to carefully monitor the purity of the water, regularly remove debris and add water, as it will evaporate.

Such structures are widely used in the design suburban areas. Fountains can decorate any ownerless area or become the highlight of a summer cottage. And by connecting fantasy and decorative elements, you can make it even more beautiful and unusual.

contemplative

landscape design

Each owner of a suburban area seeks to make his home and the space around it as comfortable as possible and at the same time beautiful. After all, a well-designed landscape design is not only a decoration of a summer cottage, but also harmonious combination different zones in the same area. How nice after a hard day to have dinner in the gazebo with your family or relax on a bench in the hot summer, enjoying the coolness of the fountain. It is about him that we will discuss in our article, and more specifically, how to make a fountain with your own hands.

Advantages

Most would agree with psychologists that the sound of water has a calming effect on the nervous system. A person watching the flow of water internally relaxes and gains emotional balance. You can sit for hours at the fountain, watch its play and splashes, think about your own.

There is nothing complicated in the design, so almost anyone can install a fountain in the country with their own hands - you just need to have the desire and the necessary materials. We will also consider the latter in our article.

The incomparable advantage of the fountain is that it can be an excellent addition to the landscape design of any suburban area. In addition, a home-made fountain with the right lighting will become your guests' favorite vacation spot.

Depending on your preference and general style landscape design the design of the fountain is also selected, but also consider the size: if the area is small, then you better install a small garden fountain with your own hands.

How it works?

The device uses the principle of circular water supply. In other words, initially a certain amount of water is poured into the reservoir (bowl), which, using a pump, then circulates throughout the entire structure. Above the surface of the bowl there is a nozzle to which water is supplied. To prevent the bowl from overflowing, a special device is installed in it that regulates the amount of water.

This is a generalized diagram that describes the simplicity of the design. Therefore, by installing a fountain in the country, you do not need to think that water consumption in the area will increase. Just pour once required volume water and from time to time only check the degree of its contamination. Although the pump has a filter, the water should still not be too dirty.

Choose a place

Of course, before you install the fountain with your own hands, you must at least visually determine the most appropriate place for him. And even better - draw a plan in order to have a specific idea of ​​\u200b\u200bthe location of the structure and take into account all the nuances in advance. We offer you several practical advice by choice of location:

1. The structure should be visible from any point on your site and not block the paths.
2. If there is a gazebo on the territory or summer cuisine, then a cozy do-it-yourself fountain will be the perfect addition to such a recreation area. If you have a playground, then you can make a mini fountain nearby with your own hands - children will be happy to splash in it in the summer.
3. Study the relief of your site and find a low-lying place - it is best suited to install a fountain on the site with your own hands - in the warm season it will be cool and comfortable here.
4. The presence of trees nearby will not have the best effect on the operation of your fountain - the roots can damage part of the structure underground, and the falling leaves can clog the water. At the same time, too open space in direct sunlight can cause the water to “bloom”.
5. It is best to install the structure away from the house, as gusts of wind can carry the water jet to the side, from which the walls will be constantly wet.

Varieties

Surely, many noticed that the fountains outwardly differ from each other not only in design, but also in design. Some are made in the form of reservoirs with nozzles, others - on a stand in the form of jugs, statues and other devices from which water flows.

Accordingly, fountains are of two types:

• submersible;
• stationary.

The first option has simple design and often found on suburban areas and even in houses. To make a similar home fountain with your own hands, you need a bowl, plastic pipe, pump and nozzle.

Stationary have more complex structure and pompous look. Such devices can often be found in city parks and squares. For this option, it is already necessary to lay the foundation, since the body is made mainly of stone or marble - durable materials resistant to aggressive weather conditions.

For a large plot of ten to twenty square meters a large stationary fountain is suitable, but for a small area it is best to install a submersible one. Well, the style of landscape design also dictates its own rules: for Japanese garden, for example, the submersible type is suitable.

Construction design

As we noted earlier, the style of design also plays an important role. After all, all elements of landscape design should complement each other and be in harmony with each other. The most common option is the classic submersible jet fountain. Its construction does not require large financial and physical costs, and it will look advantageous in any design. Especially if you want to complement them artificial reservoir. If you want to see options for how do-it-yourself fountains can look like, we presented a photo idea at the end of the article.

The shape of the bowl is most often symmetrical - it is either a circle or a square. You can put on the edges decorative rock or pebbles, add greenery. Only plants must be moisture-loving, otherwise the appearance of the composition will be hopelessly spoiled by rotting plants.

Necessary materials

Before you make a decorative fountain with your own hands, you should take care of the materials and tools for construction in advance. If you want to do stone fountain, then you will need the following materials:

• smooth rounded and flat stones of different sizes;
• gravel or crushed stone for drainage;
• bowl for water;
• water pump;
• copper tube;
• clutch;
• plastic pipe of small diameter;
• silicone;
• boards to strengthen the structure.

In accordance with the above materials, you will need tools:

• hammer;
• jigsaw or small saw;
• scissors;
• fum tape;
• drill;
• sliding key.

Depending on the desired decor method, you may need Additional materials and tools. Here you can orient yourself according to the situation or make a list of necessary items for work in advance so as not to be distracted in the process.

Pump installation

Undoubtedly, the main and important part of the whole structure is the pump. If you are a beginner and still do not know how to build a fountain in the country with your own hands, listen to our advice: you need to approach the choice of a pump thoroughly. First, consider the volume of the bowl - the larger it is, the more powerful the pump will be. The presence of a filter will protect it from various debris and extend its service life.

There are two types:

• surface;
• submersible.

The first type is installed on the surface, but in no case above the water level. This is where the principle of communicating vessels comes into play.

It is advisable to install a submersible pump not at the very bottom of the bowl, but at some elevation - then the sediment will not enter the filter. Keep in mind that the pump will consume electricity, so make the necessary communications in advance and provide a safety shield.

Even if it is not possible to install an electric pump, do not be upset - then we will tell you how to make a fountain in the country without it.

Design without pump

Out of stock submersible pump, you can make an outdoor fountain. If you have a well with a pump on your site, then you can bring this water through the pipe into the fountain. The only thing you will need to decide on the place of water flow - for example, you can turn on the fountain and water nearby plants at the same time.

Thus, you can create mini garden fountains with your own hands at several points on your site.

External design

Of course, you should not forget about the end result of your work. Appearance the finished structure should be pleasing to the eye, and the backlight will allow you to enjoy the beauty of the fountain in the evening. Here are some decorating tips for you:

1. You can use a variety of nozzles: the shape of the jet will depend on their shape. It can be in the form of a dome, an umbrella and even a geyser.
2. Properly selected lighting will add zest and mystery to the reservoir. Light sources can be installed not only around the perimeter of the fountain, but also under water. And it is not at all necessary to use standard options - the multi-colored glow of water will definitely fascinate any viewer.
3. Use flowers and shrubs to decorate the pond - thanks to them, the impression of a truly "paradise" corner will be created.

We invite you to see how beautifully designed garden fountains with your own hands, the photos of which are below.

Ideas and important little things

There are many photos of country fountains on the Internet, methods of their construction are described. You can also find enough information on how to make a home fountain with your own hands. Yes, yes, such mini-devices look very original and complement the interior. Such designs are especially popular among supporters of Feng Shui. Of course, the process of their construction is much simpler and cheaper - and the dimensions are quite small.

If you still have a desire, but do not know how to make a fountain at home, we will help you make the right choice and give you a few useful tips:

1. If there is no space on the site, the fountain can even be made at home - in the hallway, for example, or in the greenhouse. Its dimensions can be completely different - depending on your desires and the available space.
2. A submersible fountain can be made from improvised means - an old cast-iron bath or a bath cut along can serve as a bowl car tire, large flower pot, wide basin.
3. The stationary version can be made in the form of a jug, bottles, stones, in the middle of which is water hose is also a great option for homemade design.
4. The fountain does not have to be placed separately - it can be part of a wall or landscape composition.
5. The cascade fountain belongs to the stationary type, and has indisputable advantage- such a structure can become the fruit of even the wildest imagination. The case may be limited not only to traditional pots, from which water pours and overflows, but also to entire structures in the form garden carts, samovar teapots, watering cans with buckets, etc.
6. Fountain elements can be painted in various colors, often used special formulations for processing to prevent the appearance of moss and mold.

And, of course, do not forget about care - with the onset of cold weather, the fountain must be turned off, the water drained from it and the entire structure covered with a film before the onset of heat. In this case, your little country oasis will delight all households and guests with its joyful murmur for many years to come.

Photo gallery

We bring to your attention a successful selection of 30 do-it-yourself fountain design photo ideas.

Now many have a desire to have (especially in summer) a small fountain that would make the atmosphere more exotic. But many are sure that this idea is beyond their means. At home, you can try to realize this dream. Homemade can be done in a few hours, even if you have never created such things.

Such products are divided into indoor (decorative) and yard, arranged on summer cottages or in yards multi-storey buildings(if they do not interfere with garages, etc.). There are many different designs of home fountains. Consider how the opportunity to make at least a small one with your own hands indoor fountain. To begin with, let's think future design according to the following parameters:

1. Desired sizes.
2. Form.
3. The number of cascades in your fountain.
4. Proper design of the closed water system of the product, otherwise the fountain will not work normally.

So you have passed the first stage, and you have a drawing of your fountain on paper. Now comes the next stage: you need to prepare materials and parts for the assembly you invented. Here is a rough list:

1. Small. If you are planning to do desktop version, then you can use an aquarium pump-pump.
2. Hermetically sealed container made of metal or plastic. For these purposes, you can adapt any dishes available in the house (vase, plastic bucket, basin).
3. For decorative design you can use pellets, shells, decorative colored glass, etc.
4. Electric cords, sockets for connecting the pump.

Self-made fountain at home

The assembly begins with the installation of the pump on the bottom (bottom) of the container you have chosen. To do this, you can use synthetic adhesives or suction cups (if an aquarium pump is used, they are included in its kit). The rise of water to the upper level is carried out using a tube (plastic, silicone). We put it on the outlet of the pump and fix it strictly vertically. Further, to mask the pump and isolate it from external environment it is necessary to close the equipment with a home-made or purchased, suitable-sized frame. If you are going to make it yourself, then do not forget to prepare the materials and tools you need for this.

If you have a plastic box with dimensions suitable for the pump, then by cutting out ventilation holes, use it as a casing. In extreme cases, you can shove the pump under a layer of colored pebbles. Next, you need to turn on your imagination, since the final result depends on it. We take any tank we like (a beautiful mug, a large sink, a plate, etc.)

It must be installed on some elevation.

This can be achieved by creating a slide of stones with your own hands, on which we mount our decorative tank with epoxy glue, into which a tube is inserted from the output end of the pump.

If there are no stones, then you can make cubes from foam or use ready-made plastic ones. To do this, we drill a hole in the vessel we have chosen according to the diameter of the tube, which is inserted into the tank (into its internal cavity), by 6-12 mm. We seal the hole and fix all the elements with our own hands, using waterproof glue and sealants.