To date, there has been a particularly increased interest in European-class fences. They are everywhere installed both in private possessions and at all kinds of objects. Meaning - fences from eurostudent.
Such fences enclose the territories of public and administrative buildings and objects, warehouse and industrial enterprises, summer cottages and other private properties. Let's take a closer look at this direction.
What is a fence made of eurostudent
The essence of the eurostudent
Eurostudent is a profiled metal planks coated with protective layer polymer (decorative). This material is endowed with a number of advantages, among which it is not high price finished products.
In addition, it is worth highlighting:
- high practicality;
- presentable appearance;
- simplicity installation work;
- durability.
In production, steel 0.5 mm thick is used very High Quality with processing:
- zinc - 275 g per sq. m;
- primer;
- polymer coating - 25 microns (one or two-sided).
This ensures the long-term indicated above and a guarantee (at least 10 years) for polymer coating(its uniform fading).
The picket fence is produced by the rolling method:
- sixteen profile bends provide reliable rigidity;
- top part cut with a stamp - looks classic.
The metal fence is a great alternative, surpassing them in terms of aesthetic and quality properties. At correct installation similar fence for a long time will serve you, pleasing the eye with the originality of performance.
Material properties
- Fences from metal fence practically do not require additional care from you during operation;
- This material is absolutely resistant to aggressive influences. external environment;
- Planks of metal pickets with the same dimensions with wooden ones are much lighter than the latter;
- By service life: this material is designed for 20-30 years of trouble-free operation;
- In addition, such a fence at any time (if desired) can be repainted as you wish, or supplemented with all sorts of decorative elements.
Know!
The planks of the European fence, having increased strength, are remarkably resistant to strong winds, while being able to bear loads of an additional nature.
Such a fence is almost impossible to damage or break!
In the photo above - the first two options are for special cases, therefore it is recommended to use them at a height of at least 180 cm due to the particular risk of injury.
On the railings this material it is possible to mount:
- lighting systems;
- signaling and video surveillance - at the same time, without worrying at all about the reduction in the bearing characteristics of the structure.
It often happens that fences of this kind are equipped with pointed tips, which significantly increases their protective qualities. Additionally, for insurance, anti-vandal head bolts are used instead of fasteners.
Construction and material for the fence
According to its design, the fence - eurostudent consists of:
- bearing area (pillars);
- metal picket fence - enclosing area.
The bearing area is the pillars between which the fence itself (enclosing area) is held.
Poles can be made from:
- bricks;
- concrete;
- metal.
The last option is the most acceptable, because it is metal (pipe 60 x 60 or more) that is the most durable material. In addition, it is less labor intensive and costly in comparison with the materials for supports listed above.
Advice!
When choosing a specific brand of metal pipe for the bearing part of the structure, one should proceed from the characteristics of its enclosing part.
The power of the support should depend precisely on the weight of the enclosing part: for a one-sided picket fence, for example, a 60 x 60 pipe is suitable.
- these are elements of direct filling between the supports. For metal picket fences, it is recommended to use a bearing jumper between the supports from a profiled pipe 20 x 40.
One shtaketin has a weight - 700 g - and it is the small weight that does not hurt to use profiled pipes of small cross section as profiled pipes. The fence can vary in height - from 1.5 - to 2.2 meters.
However, thanks to modern technologies You can order any size and color. The width of the section is - 2, 2.5 and 3 meters.
Do-it-yourself installation of a fence from a European picket fence is a simple matter
Installation of the enclosing part
- The height of the metal picket fence can be from half a meter to 3 m, but the most common option is to use 1.25 - 2 meter strips;
- By installing such a fence, pickets can be placed at any reasonable distance from each other;
- Sometimes pickets are installed in a checkerboard pattern, thus obtaining a “deaf” fence of increased strength, but while maintaining ventilation functions.
Conclusion
As you understand, it is quite possible to make a hand-made installation of a fence from a euro picket fence at home or in the country. Clear instructions can be a good help for you! In addition, in the presented video in this article you will find Additional information on this topic.
Market building materials every year grows and enriches with new and new types of products. With the development of technology, materials are becoming more modern, and their advantages over competitive ones are undeniable. Among such products is a eurostudent.
European picket fence for a private house
Why is the material so good, where can it be used and how exactly to use it? Let's consider in more detail.
Material Features
Euro picket is metal sheets about 10-15 cm wide and from one and a half to three meters high. The metal surface is galvanized and coated with a polymer composition to protect against harmful effects adverse environmental factors (rain, snow, frost, hail, fog).
In appearance, it resembles, but has several advantages:
The wide possibilities of using the material contribute to the rapid spread of new items among the owners of their own homes and various companies.
Example original fence for a cottage
The popularity of the picket fence is only growing, thanks to which new colors and shapes appear. If each section is made separately, the material will cost more, but its quality will be much higher.
When mass cutting parts from one sheet, defects such as burrs, notches and other small deformations may appear.
They can also be different. If the powder method is used, each part will be painted evenly on both sides. They also produce a one-sided version of the fence, when only the front side of the fence is treated with paint, and inner side remains matte white.
Installation process technology
In the process of installing a fence from an eurostudent fence, several main stages can be distinguished:
- Preparation for installation (calculation and purchase of materials, preparation of tools, search for workers, if not planned self-installation fences);
- Territory planning;
- Frame installation;
We will describe each stage in detail for a clear understanding of the entire installation process.
materials
From the materials you will need:
Scheme of a fence section made of eurostudent
The parameters of the height and width of the material are pre-driven into them, and when you enter the calculation conditions (the length and shape of the perimeter of the site, the presence and number of gates and gates, their width), the computer issues exact value the number of shtaketins required to install the fence.
However, such calculators have a certain error, and during installation, you can often notice that there is not enough material. Experts recommend adding about 10% to the value calculated by the calculator in excess of the required value so that the picket fence is exactly enough. It is better to have some material left in stock than not enough.
After all, ordering a new batch of pickets can lead to many problems: a long wait for the completion of the manufacturing process (if the right material out of stock), differences in the quality of materials from different batches (shade may vary slightly); it may happen that the purchased material was sold out without a trace and its further production is not planned at all.
An example of a double-sided fence made of eurostudent
And the fault will be the wrong calculation using a universal calculator.
Instead of a calculator, you can just as well use a simple formula for: for each meter of fence there are about 6 shtaketins (if they are up to 15 cm wide) or 8 shtaketins (with a width of 10 cm). To calculate the length of the fence, the length of the gate and gates must be subtracted from the length of the perimeter. So, without calculators and other special programs, you can roughly calculate how many pickets are needed to install a fence of any length.
Tools
To install a fence made of eurostudent, you will need:
After everything is ready, you can proceed directly to the construction work.
The technology of erecting barriers is the property of developers. No secrets, everything is available and open! installed the frame and mounted the filling from corrugated board or picket fence. However, any amateur performance during the installation of the fence is excluded. Deviations from step by step instructions will not bring pleasant moments in the future. How not to use useful tips!
Euro picket photo
We owe the appearance of the euro fence on the territory of our habitation to manufacturers and manufacturers of stainless steel with a wide range of brands - the companies of the Belgian ArcelorMittal and the German ThyssenKrupp. Adopted know-how for the manufacture of lamellas from steel sheet served as an accelerator for the creation of a metal picket fence.
The metal eurostudent is a product made of high quality cold-rolled galvanized steel - corrugated board, industrially cut into individual elements(lamellas) with a polymeric covering.
Assembled from eurostudent sectional fences compare favorably with existing structures, combining the strength of the metal, the durability of the construct and the unpretentiousness of maintenance. The metal fence has become in demand due to the unhindered movement of air in the areas and the original appearance.
The cost of a European picket fence is acceptable for the purchase of lightweight lamellas and a structure made of galvanized steel with a polymer coating and increased rigidity. We will not hide the fact that many people assemble and assemble a fence made of eurostudent on their own.
Helpful Hints
The profile of the eurostudent is varied - from rectangular section to semicircular. The dimensions of the lamellas are from 80 to 128 mm in width.
If the European fence is still Terra Incognito for you, then this video is by the way.
Types of eurostudent
Distinguish eurostudent single-sided or double-sided fastening. For one-sided fastening, the placement of rails or picket lamellas is obtained in a single row with a gap, two-sided fastening provides a two-sided arrangement of rails in a checkerboard pattern. Let's say, Eurostudent (side A) and (side B) are used for traditional sewing with a distance between the lamellas up to 40 mm. For double-sided sewing (“Blinds”), sides A and B are used with an offset installation of lamellas.
To install a fence from an euro picket fence, it is recommended to prepare a frame and fix the pickets using a mounting clip on the posts.
Fence installation technology
In summary, the technology of the fence device consists of the following steps:
- on the selected flat area, the future location of the support pillars is planned
- under the supporting pillars they dig or drill holes in the ground up to a depth of 800 mm
- make the installation of support poles with filling holes concrete mix, for brick pillars organize masonry
- transverse logs are attached to the supports in the mounting clips, on which pickets are to be mounted
- make installation of the picket fence and fix it on horizontal lags
- for specialized metal poles install a baffle.
By basic technology you can install the fence in certain ways.
how to build a metal fence
There are fundamentally distinctive ways of arranging fences for a picket fence:
- fence with metal posts
- fence with decorative brick pillars
- metal fence on a strip foundation
- fence with brick pillars on a monolithic foundation.
Any method is possible for hand-made installation. Let us know what the experts think budget option fence on metal poles.
Do-it-yourself fence from eurostudent
Installation begins with the installation of supports, which can be installed in the following ways: driving or backfilling into a drilled hole and concreting.
European picket fence posts
The installation of support pillars is considered a fundamental measure when creating a fence. Possible installation options: *metal fence posts or brick.
metal
For pillars everywhere use profile pipes with a section of 60x60x2, 80x80x3 and 100x100x3 mm, as well as screw piles D76 and D89. In practice, preference is given to profile pipes with a section of 80x80x3, capable of withstanding the weight of the fence at maximum load.
For fixing the lamellas, transverse frame logs made of profile pipe 40x40x2 or 50x25x2mm. The pillars are fixed by driving and backfilling. The bottom of the hole for the post is strengthened, after installing the pipes they are covered with gravel and rammed. Each picket lamella is fastened with 4 self-tapping screws - 2 each for the upper and lower logs.
Helpful Hints
The choice of a section of a profile pipe as supporting pillars must be confirmed by an approximate calculation, the initial data of which are the parameters overall length fences and the number of poles. The number of required slats is calculated by dividing the length of the fence by the width of the slats, taking into account the width of the gap between the slats. For double-sided installation, the result is doubled.
methods of attaching a metal picket fence
There are several ways to horizontal and vertical fastening metal fence: using welding and using special fastening systems and holders. Mounting X-brackets allow you to mount the log horizontally on vertically mounted support poles.
Step-by-step instruction
Step 1. Installation of supporting pillars.
Step 2. Installation of transverse logs according to the estimated height and weight of the fence.
Step 3. Fixing the shtaketin piece by piece
Step 4. Installing plugs on profile pipes.
Placing a metal euro fence on metal poles is the most affordable way.
Useful tips for mounting the euro picket fence are shown here.
More time-consuming and costly consider the method of installation on strip foundation, especially if they are involved brick pillars.
brick
To install brick pillars for the fence, it is necessary to erect formwork and a base under brickwork due to the solid weight of the whole structure. Tape monolithic foundation will allow erecting fences up to 5 m high, with a well-chosen pattern of euro picket fence, the fence has a presentable appearance
Step-by-step instruction
Step 1. Marking the site for brick pillars
Step 2. Digging a trench filled with sand and gravel
Step 3. Laying reinforcement and installation of support pillars, followed by pouring the foundation with concrete
Step 4. Tying each support post with a brick
Step 5. Installing the fastening elements of the transverse log
Step 6. Piece fastening pickets.
The fastening of the transverse logs for mounting the picket fence on brick pillars and the supporting profile is carried out on special brackets using dowels and self-tapping screws.
The device of brick pillars for fencing is shown in the video.
Choosing a fence for the site is not an easy task - it is necessary that it be reliable, durable, beautiful. All these requirements are met by a fence made of a metal picket fence (Euro picket fence). Climbing on it is problematic - not that rigidity. Breaking it is "boring" - usually, lovers of mischief are limited to bending a couple of planks. Beauty, of course, is a subjective criterion, but such fences look better than the same solid one. In addition, they are not so susceptible to wind loads, which saves on support poles. An additional plus is that they are breathable. In general, a good option.
What is a metal fence
The metal fence is made from galvanized steel sheet. A relief is formed on the sheet, after which it is cut into picket strips, covered protective compounds, is painted. Get strips of a certain height. Usually the height is from 150 to 180 cm. To complete the fence, you also need support poles (most often 60 * 60 * 2 mm), bowstrings (two or three crossbars that go between the poles) and fasteners.
Types, shapes, profiles
The thickness of the metal of the European fence can be from 0.4 to 1.5 mm. The most common is made of steel with a thickness of 0.5 mm. Fence width - from 80 mm to 128 mm, length - up to 2 meters.
P and M - shaped profiles of a metal picket fence
There is a metal fence with a different profile: P (rectangular), M-shaped and semicircular. M-shaped have more ribs, respectively, have greater rigidity. But there are also U-shaped ones, in which grooves are formed in the “back”. In this case, it is already difficult to say which of them will be tougher. Most likely, the latter, especially if it has rolled edges.
Semi-circular also have greater rigidity, but are more difficult to form and usually have a higher price. For greater strength, along long side additional grooves may also be formed.
In general, the more grooves, stiffeners, the better the bar resists bending along the length. But with the complication of the relief, the price becomes higher. Since it is rather big in itself, you usually have to find a compromise. In any case, the bar must withstand your attempts to bend it.
What to look for when choosing
When you choose a metal picket fence, it is advisable to look at the party offered to you live. The same thickness of the metal can be declared, but in practice it turns out that the edge of the bar from one batch can be bent with a finger, with another batch such a trick fails. And this is from the same manufacturer. The point is the quality of the batch of metal, and it is rarely stable.
Rolled edge, several layers of protective coatings - these are the signs of a good metal picket fence
Also be sure to pay attention to the edges - it is better if they are rolled. First, it's more attractive appearance, secondly, the high rigidity of the picket fence, thirdly, the sharp edge is bent and it is impossible for them to get hurt. There is only one drawback with a rolling fence - a higher price, since special equipment and additional processing time are required.
If we talk about the products of specific companies, then the Grand Line (Grand Line), Barrera Grande, Nova, TPK Metalroofing Center, FinFold, UNIX (Unix) are popular.
Coloring methods
It is worth understanding the method of coloring. There is an iron picket fence with two-sided and one-sided painting. With one-sided, the back side is covered with a layer of primer without staining. Has, respectively, grey colour. Metal picket fence painted on one side, gray on the inside. It's not so bad - it's not conspicuous. If this option does not suit you, either buy with double-sided painting, or paint it yourself. The paint is taken “for roofs”, choosing the right shade. Note that the metal painted with a brush looks ... not very good. If there is an airbrush, the appearance will be good, although not ideal.
This is how the “wrong side” of a metal picket fence painted on one side looks like
It should also be noted that there are two types of coloring of a metal picket fence:
- polymer coating;
- powder paint.
The first method is much more reliable, since the application technology requires special equipment and strict adherence to technology. As a result, such a picket fence withstands increased mechanical influences. Even if there is a scratch in the coating (although you have to try), the metal does not rust, as there are still protective coatings that prevent rust.
Polymer coating is the best choice today
Powder coating, in theory, is no worse. But only if it was made according to the rules: protective covering, and on top of it - powder paint and baked it in special chambers. But the bottom line is that you can apply paint in the "garage", and somehow you can burn it there. The result will just be completely different. In addition, there are ready-made sheets of Chinese origin. In these, the paint is applied in the shop, but often directly onto an unprimed steel surface. Outwardly, it is impossible to determine all these nuances, and after the slightest scratch, rust appears. So the polymer coating is more "safe".
What can be a metal picket fence
You may like metal fences or not, because there is no dispute about tastes. But in terms of practicality, they certainly outperform. Once installed, you do not remember the fence for years. It does not need to be painted in order for it to look decent, since good quality The paint stays on for years without visible changes. And this is one of the important factors that make you think about installing such a fence.
On a strip foundation
With foundation and pillars made of clinker bricks
Mounting methods
There is a single-row and double-row (double-sided, checkerboard) method of mounting the metal picket fence strips. With a two-row, the slats are placed on both sides of the bowstring, and so that they overlap each other by at least a centimeter. Therefore, the distance between the planks should be slightly less than the width of the fence. With this installation, slats per linear meter of the fence will require 55-60% more. But the fence turns out to be practically invisible - only at a certain angle you can see a small part of the area. And this despite the fact that the fence will not be solid and all the "charms" of a solid fence will not touch you.
Most often, the slats are mounted vertically, but there are also horizontal way installation - it can also be single-row or double-row. The horizontal fence looks more "exotic". With a two-row (two-sided) installation of the strips, it turns out to be generally opaque.
The disadvantage of this mounting method is that special poles and intermediate poles are needed to provide the required structural rigidity. Another caveat: planks are usually produced up to 180 cm long, longer ones will have to be ordered, and this costs extra money. So either you have to put up poles more often, or overpay for a non-standard size.
Dimensions and distances
When mounted in one row, the gaps between the strips may be different. The exact distance is chosen arbitrarily, depending on how "transparent" you want to make the fence. Most often, the distance between the pickets is 35-50% of the width of the plank. But this is not a rule, there are both smaller and larger gaps.
When mounting in a checkerboard pattern, if you do not want your yard to be visible at an angle, the planks should overlap 50% of the width of the picket fence or more. If "viewability" is not important, you can set them so that the edges overlap by only 1 cm.
The height of the fence is selected depending on the wishes of the owners. If you want the yard to be as closed as possible from prying eyes, the length of the bar should be from 180 cm. Given that they will be slightly raised above the ground, this is enough for the vast majority of people to not be able to look into your territory.
If you don't care if something will be visible through the fence or not, you can take both 1250 mm and 1500 mm. In the first case, the fence will end somewhere at the chest level of passers-by, in the second - at eye level or slightly lower (see the figure for an approximate layout), and this is without a foundation.
The width of the span of a vertical fence made of a metal picket fence is 200-250 cm. It is at this distance that the pillars are dug in, then two or three crossbars are fixed between them. These crossbars are called "lags" or "bowstrings". For a picket fence up to 150 cm high, two crossbars are enough, for higher ones, three are better.
Infill types
There are several more varieties of filling spans (distances between supporting pillars). The easiest way to install a direct way is when all the strips are the same length. On top of such a fence, you can put a U-shaped bar made of the same material (sold in the same place as the euro picket fence). In addition to the aesthetic load, it also covers the metal sections, which increases the service life of the fence.
All "waves" require trimming most of the planks to a certain distance. One "wave" per span is made in increments of 50 or 25 mm. With a step of 50 mm, the height difference between the shortest and longest planks is significant, but the fence looks more delicate. In the case of a "wave" with a pitch of 25 mm or with a "double wave", the difference is smaller. The upper bars are put here much less often, but they can also be installed. Only at the point of fracture of the “wave” will you have to cut the sidewalls and bend.
Features and installation rules
When installing a metal picket fence in middle lane Russia, it is recommended to install poles from a profiled pipe 60 * 60 mm (60 * 40 can be). For crossbars, it is more convenient to take the same profiled pipe, but with a section of 40 * 20 mm. In this case, the fence will definitely withstand wind and snow loads.
When installing, the installation step of the pillars is 2 meters. If there are two crossbars, then they are fixed so that there are 25-35 cm to the edge of the plank. With a fence height of 150 cm or more, the distance is 30-35 cm, with shorter ones - 25 cm. But, with a fence height above 1.5 m, it is better to do three lags, and not only in regions with strong winds. Just with two lags it turns out too long distance between fasteners, which makes it easy to push the slats.
There are two ways to fasten the slats: with screws and with rivets. Self-tapping screws and rivets are installed along both edges of the bar on each of the crossbars. That is, if there are two crossbars, 4 self-tapping screws / rivets are needed for each bar, if there are three, then 6 fasteners are needed per picket. You can, of course, fix it on one self-tapping screw or rivet on the crossbar, setting it in the middle. But in this case, pushing the pickets with your hands is as easy as shelling pears - and you don’t need to climb over the fence.
Mounting is faster this way, but this is a “purely decorative” fence
Which fastener type to choose? Self-tapping screws are easy to install - this is their plus. But they are also easy to unscrew, which, under certain circumstances, can be a minus. Rivets take longer to install, but are much more difficult to remove. What to choose? On the front of the fence, or if the fence is left unattended for a long time (summer cottages), it is definitely worth putting rivets. Of course, if the attackers set their sights on the goal, they will also cope with the rivets, but this will be more difficult to do. When installing a fence between neighbors in houses permanent residence, it is quite possible to mount a metal picket fence on self-tapping screws.
How to DIY
As you probably noticed, the metal fence is produced using almost the same technology as the profiled sheet, but the sheet costs less. Therefore, many people have the idea to make a picket fence by spreading the profiled sheet into strips. In principle, this can be done if you are able to cut strictly along the line without any noticeable deviations. But for cutting it is necessary to use scissors for metal - perforated or manual. In no case should a grinder be cut, as it burns out the protective cover. So the work is not easy and it will take a lot of time. If that doesn't scare you, you can try.
What is the disadvantage of a homemade picket fence from a profiled sheet? Everything is obvious: the edge is rarely even, since it is difficult to do it manually. In addition, the cut is unprotected and may begin to rust. You can, of course, smear the sections with a primer / paint, but in order for all layers to lay down normally, an absolutely clean surface is required. That is, the places of cuts must first be dedusted (not so difficult, but it takes time), then also degreased. Only in this case the protective coating will be of really high quality.
It is advisable to roll the edges - this will give the home-made picket fence greater rigidity, because additional reliefs are rarely formed on the profiled sheet. It "holds" its shape due to its size and the alternation of waves.
A common dilemma when arranging a site is the choice of material for a strong, beautiful and durable fence. Among the many options Special attention deserves a euro picket fence, which is a worthy analogue of a wooden picket fence. A fence made of euro picket fence is distinguished by increased strength, perfectly shades the surrounding area and, unlike a wooden picket fence, does not require special care and periodic painting.
Euro picket properties
The fence consists of metal strips of various profiles with a width of 40 to 120 mm and a length of 1.5-3 meters. High-quality cold-rolled galvanized steel is used in production. The thickness of the metal reaches 0.5 mm and has a one- or two-sided painting with a thickness of 0.025 mm from a polymeric material.
Outwardly, the euro picket fence does not differ from the traditional wooden picket fence, but it has increased strength, durability and has a large color palette. When choosing a European picket fence, it is necessary to pay attention to the production technology, which is divided into three types:
1. Edge processing method:
- with rolled edge. The edges of the section are rolled, which gives the product strength and a more attractive appearance;
- without rolling. Sections are cheaper to manufacture and look less neat.
2. Manufacturing method:
- piece production. Each lath is passed through a rolling mill. This allows you to improve the quality of the product, and also increases its cost;
- profiled cutting. Reiki are cut from a profile sheet. The ends of the picket fence are not machined, which lowers their quality. This technology makes the fence as accessible as possible.
3. Painting method:
- one- or two-sided polymer painting;
- powder coating. Allows you to get an even layer of paint on both sides.
Color variety of eurostudent
The advantage of the euro picket fence
Compared to its counterparts, the eurostudent has the following advantages:
- high ventilation, similar to a wooden picket fence;
- high service life (more than 50 years);
- fire resistance;
- high strength and rigidity;
- attractive appearance;
- simple installation technology;
- low weight. Facilitates transportation and installation;
- resistance to high humidity and direct sunlight.
Do-it-yourself installation of a eurostudent
For the fence device, you need the following materials and tools:
- intermediate pillars. Profile pipe of square section with a wall thickness of at least 2 mm;
- Cross logs from a rectangular profile pipe. Based on 2 pcs. for arranging the distance between two pillars;
- Digging tool for posts. Shovel, manual or motorized drill;
- Level, sledgehammer, drill, hardware, tape measure;
- Primer and paint to match the color of the fence;
- Crushed stone, sand, cement.
The installation of the fence practically does not differ from other types of fences, but it has nuances at the stage of attaching the picket fence.
Before starting work, the territory is marked, and the locations of the pillars are indicated. The recommended distance between the posts is 1.5-2 m.
To install the pillars, you first need to dig or drill a hole with a depth of 50-60 cm. A pillar is set into the hole according to the level and additionally hammered to a depth of 30-50 cm. After that, the hole with the pillar is poured with concrete mixture.
After the concrete has set, logs are welded or screwed to the posts. The lower lag is attached at a distance of 30-50 cm from ground level. Upper - 20-30 cm from the milestone of the pillar. The resulting frame is primed and painted in the color of the European fence.
The picket fence is strictly vertically attached to the frame with the help of self-tapping screws. The recommended distance between the rails is 2-5 cm.
There are two ways to mount the picket fence - regular and chess.
Euro picket fence price
average cost running meter picket fence is 0.8 - 1.5 dollars. Depending on the height of the fence, the width of the picket fence and the method of installation, the cost of the fence is calculated.
Loading...