How to glue wallpaper on the ceiling. How to hang wallpaper on the ceiling How to hang vinyl wallpaper on the ceiling

Ceiling decoration with wallpaper in our time is very common, as it does not require large financial expenses and is carried out for short period time. How to glue wallpaper on the ceiling so that the work is done efficiently?

In contact with

Classmates

Wallpaper helps to hide defects in the surface of the ceiling, which are noticeable during normal painting. Today, the choice of wallpaper is very diverse. It all depends on the aesthetic taste of the owner of the room. You can purchase this finishing material with a pattern or pattern. But it must be taken into account that if the room is non-standard or complex shape, then it will be difficult to select a pattern or pattern when gluing. For such rooms it is better to choose wallpaper for painting. Each type of canvas has its own advantages and purpose.

To start wallpapering, you need to carry out the following work.

Room preparation

The room must be carefully cleaned so that there is no dust and dirt. Only after that you can proceed directly to work. A day before gluing, it is necessary to ensure the desired temperature (22-24 degrees) in the room by closing the doors and windows. To prevent bright sunlight from falling on the ceiling, the windows can be curtained.

Wall mural for the ceiling "Sky"

Tools and materials

For work, we need tools and materials. First you need to choose a wallpaper, carefully reading the instructions for sticking. For the ceiling, they are most often used, as well as liquid wallpaper. The wallpaper canvas should be without edges so that it can be glued close to each other.

Gluing is carried out using the following tools:

- a sharp knife for cutting wallpaper;

- pencil and tape measure;

- brush, roller for applying glue;

- dishes for preparing a solution of glue;

- to smooth out air bubbles;

- stepladder.

Needed to do the job the following materials:

— paper tape or mesh for seams;

- a cloth for wiping off adhesive residue;

Red wallpaper for the ceiling in oriental style

Preparing the ceiling for gluing

How to glue wallpaper on the ceiling? First, the surface for gluing is prepared: it must be smooth and even. The ceiling is the most visible part of the room, which is always on display, and therefore it must be perfectly flat.

First you need to remove the remnants of the old glue, paint. During daytime or artificial lighting the ceiling is perfectly visible: all the bumps, cracks, bubbles are visible. All cracks and pits are necessary so that they are not visible on the canvas.

It is necessary to pay attention to the corners of the ceiling with the walls. The corners should be straight, about 90 degrees. If there are old wallpapers on the ceiling, they must be removed. It is enough to cut in some places with a spatula and apply water with soda or with some kind of detergent. After that, they easily fall behind and are removed.

From the surface treated with enamel, the paint can not be removed. It is necessary to treat the surface with soapy water, dry and clean with a sandpaper. Lime coating can be removed with a brush hot water. After half an hour, a thick layer is easily removed with a scraper.

If the ceiling is laid out gypsum boards, then it must be puttied, a special mesh is installed at the joints, After the putty dries, grinding is carried out and. The primer improves the quality of gluing. It is preferable to use an acrylic primer that allows air to pass through the surface.

Before starting work, you need to remove the chandelier and insulate the wires. In order to compensate for the lack of light, you can use portable lamps.

Wallpaper in plasterboard construction

Wallpapering process

First you need to correctly make the markup on the ceiling. The center of the ceiling is determined by crossing the diagonals from the corners. A line is drawn in the middle of the ceiling and from this mark the distance is measured half the width of the roll in one direction and the other. This will be the first page. For example, if the width of the roll is 1 m, then you need to measure 50 cm in one direction and 50 cm in the other.

Start gluing from the center to maintain symmetry. If it is necessary that the joints are less noticeable, it is necessary to glue from the window, from a source of natural light.

For each type of wallpaper there is a special glue. Glue must be diluted from the dry mixture half an hour before gluing. Mix well and leave to swell. It is necessary to dilute strictly according to the instructions, maintaining the necessary proportions.

After marking and preparing the glue solution, you can start gluing wallpaper on the ceiling. There are several rules:

- you need to quickly stick the canvas so that the glue does not dry;

- it is necessary to measure correctly, avoiding re-gluing;

- in the joints, carefully apply glue, avoiding smudges and stains;

- carefully look at the pattern and select the desired piece of wallpaper;

- Thoroughly coat corners and joints.

Combination of wallpaper for the ceiling

When the glue is applied, it is necessary, before it dries, to take the canvas, gently holding it by the beginning, middle and edge. Then attach the side edge to the junction of the ceiling and wall, use a spatula to move to opposite side. To keep the surface of the canvas intact, it is necessary to carefully smooth the wallpaper to eliminate air bubbles. After gluing the first strip, proceed to the next, without the formation of a gap or overlap. Joints must be carefully rolled with a roller or spatula, depending on the type of web material.

The most extreme strip, near the wall, must first be measured and cut off. After drying, it is necessary to trim the excess pieces of the canvas with a knife and spatula.

During drying, do not open windows and doors in the room, as it will break temperature regime, and the wallpaper may not adhere well.

In order to know how to properly glue the ceiling with wallpaper, you must carefully read the instructions for the wallpaper. The process of gluing wallpaper on the ceiling is practically no different from these works on the walls.

Embossed wallpaper

Types of wallpaper for the ceiling

Depending on the type of wallpaper, there are some subtleties of gluing. The easiest way is to stick wallpaper on a non-woven base. First, glue is applied to the surface of the ceiling, then the canvas is glued and leveled with a spatula. Glue must be used in a thick consistency. The main advantage of this type is that when removing old wallpaper, the base does not remain on the ceiling surface, i.e. no need to further level the surface.

When working with vinyl wallpaper, the glue is applied only to the canvas, aged for about five minutes, and then glued to the ceiling. The vinyl sheet cannot be stretched, therefore, a spatula is not used in the work, but a soft roller.

Glued with a special plastic tool, which is called a falcon. The master collects the mixture and applies it to the ceiling, and then levels it with a falcon, constantly wetting it with water.

Fabric wallpaper for the ceiling

Final works

When the wallpaper is completely dry, sharp knife excess pieces are cut off. Then painting is carried out with a water-based or acrylic paint approximately 48 hours after drying. The color is selected based on the color of the walls and the interior. On the upper part masking tape is glued on the walls so that when painting the ceiling, the walls do not get dirty. Staining is done in the same order as pasting was done. After the first layer of paint has dried, a second one is applied so that the surface is completely painted over. A brush is used to paint the stucco.

After that, fixed ceiling plinth, fixtures are installed, and electrical wiring is connected.

With ceilings decorated beautiful wallpaper, the room will look much more beautiful. The comfort and coziness of the entire room will increase.

Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Kirill Sysoev

Calloused hands do not know boredom!

Content

Quite recently, several decades ago, during repairs, the ceilings were whitewashed with chalk. It was almost the only way to decorate ceilings. At present, the plane above the heads does not have to be white: bright, elegant materials are used at the top as actively as on the walls. It is important to know how to glue the wallpaper on the ceiling correctly so that the paper, vinyl or non-woven fabric lays flat and forms a flawless surface.

Do they stick wallpaper on the ceiling

Finishing the ceiling space is a complex and tedious process. For some types (installation of a suspended plane, installation stretch fabric, gluing wallpaper) you need a team of two or three people, you can’t do it alone. Do owners of apartments in new buildings glue wallpaper on the ceiling? Often this type of finish is replaced with modern coloring. However, with undoubted advantages, roll material will remain popular for a long time to come. Here are five reasons for its popularity:

This is not the most expensive type of finish. The material is presented in building markets in a wide price range.
You can easily choose the finish to your liking. On sale there are wallpaper rolls of any color, pattern, texture.
Wallpaper fabrics, especially ceiling ones, are perfectly combined with each other. Your design will be unique.
This type of finishing work does not require expensive equipment.
Professional pasting skills are also not required. If necessary, you can easily handle the repairs yourself, doing the work neatly and in a routine manner.

Which wallpaper is better

Sticking wallpaper on the ceiling with your own hands begins with the choice of rolls. What kind of wallpaper is better to glue on the ceiling in your room is an important question. So that the result of the repair pleases you for a long time, think about what the material, pattern, color of the wallpaper will be. It's good if the color of the upper plane is the same color scheme like the walls, but slightly lighter. It is better to choose light rolls with small pattern or without it at all. Such coloring does not need complex joining of lines, it hides surface flaws.

Used for pasting residential premises panels of different materials. Often they buy non-woven, vinyl, paper wallpaper. Each material has its own characteristics, pros and cons, you need to know about them before you stick the wallpaper on the ceiling yourself. If you will be pasting for the first time, and your ceiling is well prepared for repair (smooth, without flaws), choose vinyl rolls. Paper lays well even on a bumpy surface, it can hide ceiling defects. Interlining looks spectacular and stylish, but it takes skills to work with it.

How many wallpapers do you need

To calculate the consumption of wallpaper rolls, decide in which direction you will stick them. According to the rules, the sheets are placed above the head perpendicular to the flow sunlight, that is, parallel to the window (in most cases this is the width of the room). When measuring the width of the room, find out the length of each panel. Take measurements and calculate how many strips you need. When determining how much wallpaper you need on the ceiling, consider the standards. Rolls are 10 and 15 meters long. Their width is 0.5 or 1 meter.

Can it be applied to ceiling tiles

Before sticking the wallpaper on the ceiling correctly, prepare the base, which determines whether your finish will last a long time. The surface must be solid, even, monolithic. This is achieved by distributing the putty mixture and primer over the plane. deep penetration. Are you wondering if it is possible to glue wallpaper on the ceiling tiles? The result of the experiment will be disappointing. The canvases will not lie flat, they will sag over time, crack at the joints, and move away in places. Dismantle the ceiling tiles before pasting to a solid layer.

You can glue wallpaper on wallpaper

Sometimes the previous finishing layer is held so firmly that there is a desire not to cut it off, to stick new strips on top. Sometimes you can glue wallpaper on the wallpaper on the ceiling, but this is the exception rather than the rule. How to determine if this is possible in your case? Qualitatively moisten the old paper with a wet brush over an area of at least square meter let it soak in moisture. If the cloth starts bubbling, it will come off under the weight of glue and finishing material. It must be removed completely, to the ground. The quality of gluing new wallpaper strips over old ones is always low.

How to glue wallpaper on the ceiling

Prepare necessary materials and work tools. You will need:

roulette;
construction or clerical knife for side cuts and cutting of the panel;
marking pencil;
special roller for smoothing wallpaper or a plastic spatula;
a rag or sponge to wipe off excess glue;
brush-brush and small brush for glue;
wallpaper rolls;
high-quality glue (preferably fast-dissolving).

Before gluing wallpaper, make sure that the base is well prepared. The ceiling surface should not have traces of chalk, cracks, potholes. Defects must be carefully processed, puttied. A strong and monolithic plane will make good primer, which should dry before the beginning of gluing. It will ensure uniform adhesion of the material to the pasted surface, the strips will hold securely.

Measure the panels of a given length, if necessary - consider the places where the pattern matches. Cut the blanks, each time marking the beginning of the strip. The marked edge should always be on the same side, this is important even if the stripes do not have a pronounced pattern. You need to draw a marker along the ceiling - the level of the first strip, a line parallel to the wall along which the first sheet is laid. Start from the window.

Lubricate the gluing area (part of the ceiling) with an adhesive solution according to the instructions. It should not be as thick as the main adhesive mass. Apply a neat, thin layer of adhesive with a wide brush. Spread the strip with movements from the center to the edge, do not allow excess glue on the smeared canvas. Treat the edges and corners especially carefully. Fold the wallpaper sheet with glue inward, leave it to soak for a couple of minutes.

On the next step you will need an assistant. Expand the panel, lean it against the ceiling immediately along its entire length. You need to quickly correct the position of the strip, aligning it with the marker line. Use a roller or plastic spatula to smooth the wallpaper, removing blistering caused by air bubbles and excess glue. Avoid wrinkles and folds along the canvas, some of them will be noticeable after drying. Repeat the action, glue the strips end-to-end, one by one, until the entire surface of the ceiling is finished.

non-woven

This type of wallpaper requires skills and some experience from the master. The fact is that non-woven wallpaper is glued to the ceiling, smearing only the base. If the wallpaper is of high quality, they are perfectly smoothed with a special spatula. The coating dries evenly, under there are no bubbles or kinks. This technique may allow you to stick blanks alone. Simply apply the strip, rolled into a roll, to the smeared part of the ceiling plane and unwind as it is glued.

Vinyl

Durable, dense material with a vinyl finishing layer well masks the irregularities and defects of the ceiling in visual perception. Sticking vinyl wallpaper is a simple matter. It is important to pay attention to the quality of the joints, well lubricating the surface. The junctions of the vinyl-coated strips are very neat and inconspicuous. If necessary, the edge of the sheet hanging along the wall is cut with a knife, using a metal spatula as a ruler.

Paper

For imperfect ceilings, paper canvases can be a wonderful finishing option. Glue thin paper wallpaper on the ceiling you need to quickly, not letting them get very wet. They are laid on the surface of any degree of unevenness and, unlike vinyl, hold tightly after drying. However, paper with an embossed pattern, more dense and massive, is more reminiscent of vinyl in properties.

How to glue wallpaper alone

You can adapt to any circumstance. So from the range you can choose non-woven rolls that are glued dry. But a team of two people will cope with the work many times faster and better. Therefore, before sticking wallpaper on the ceiling alone, try to find a person to help.

Video

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

Not every home craftsman knows how to glue non-woven wallpaper on the ceiling. This process has several features. We will talk about them in detail.

Non-woven fabric is understood as a special nonwoven fabric, produced by complex technology from textiles and cellulose. An obligatory component of such wallpaper is special connection with a very fine texture. It acts as a binding element for textiles and cellulose, characterized by properties that ordinary fiberglass has.

Non-woven wallpaper

Non-woven wallpaper has the following operational advantages:

Sufficiently high strength. Non-woven products are almost impossible to tear when gluing. This distinguishes them favorably from paper wallpapers.
Possibility of gluing almost all known ceiling surfaces, from wood and plasterboard to concrete.
Stability geometric shapes and sizes. After drying on the ceiling, the wallpaper does not shrink. And if you accidentally wet non-woven products before gluing, they will not lengthen even a millimeter.
Excellent aesthetic performance. Externally, non-woven wallpaper on the ceiling looks perfect. You can purchase material with an ordinary (flat) image, as well as with a three-dimensional pattern that is now popular.
When pasting the ceiling, it is required to apply glue exclusively to its surface. The wallpaper itself does not need to be processed. They are applied to the ceiling in a dry form, which greatly simplifies and speeds up the process of finishing the room.

Non-woven wallpaper well level surfaces with small defects - dents, cracks. They are allowed to be glued to uneven ceilings. In addition, after a while you have the opportunity to easily remove upper layer such wallpaper, leaving their leveling base on the ceiling, which can be repainted several times. We add that it is really easy to care for the non-woven finish. It can be cleaned with a damp cloth and vacuumed. At the same time, the wallpaper will not lose its unique operational and wonderful aesthetic properties.

As mentioned, non-woven products are suitable for most ceiling surfaces. Here it is only required to correctly prepare the ceiling for pasting. If it was previously whitewashed, it is necessary to wash off the old finishing layer with a rag and brush, as well as a soapy solution. In cases where the whitewash was applied in a thick layer, it is advisable to first clean it off using a spatula. And only then rinse old layer fully. plastered and concrete floors be sure to align. You have to close up all the existing cavities and gaps, putty the surface treated in this way, and dry it. After that, it is desirable to bring the ceiling to an ideal state with a fine sandpaper. .

Non-woven products for ceiling surfaces

Important point! Concrete or previously plastered surface must be well primed. Then non-woven products will stay on the ceiling, without exaggeration, forever. Painted with dispersion or oil formulations surfaces are not allowed to be prepared for the procedure. Just wipe the dust off them and feel free to start gluing the wallpaper. But only on condition that the paint does not fall off, but is held firmly enough. practical advice. Take a small piece of tape, stick it to ceiling surface. And then abruptly tear off. If there are no particles of paint on the adhesive tape, feel free to glue the non-woven wallpaper on the ceiling.

With plasterboard ceilings you have to tinker a little. You need to carefully close up all the fastening areas of the drywall sheets and the joints between them and the putty. It will be correct to lay reinforcing tape at the junctions of individual products. And putty the surface on it. Then wait until the leveling layer is completely dry, sand it and apply a primer. Note! There is no need to putty the entire drywall surface. Interlining is a dense material with two layers. He himself, as we noted, will cope with the alignment of the ceiling.

For pasting the ceiling with non-woven products, you need to use a special glue. When buying wallpaper, sellers will definitely advise you which composition is best to purchase. The following types of adhesive mixtures are popular:

KLEO Extra Line;
Methylan Ultra;
Special interlining Quelyd;
Premium.

All of these compounds are sold in the form of powders. They need to add water in the proportions recommended by the manufacturer and mix thoroughly. Note that the glue on the ceiling is always made thicker than in cases where walls are pasted over with wallpaper. Now proceed to the main operation. First, mark the ceiling for the first non-woven fabric. This strip must be glued as correctly and evenly as possible. It is she who will subsequently begin to set the direction for all other pieces of wallpaper.

Sticking non-woven fabric on the ceiling

The marking is done simply - at the joints of the ceiling with the walls, measure 50 cm each ( standard width non-woven wallpaper). Put the appropriate marks and stretch the twine (rope, marking cord) between them. Draw a marking line along it. Professionals advise marking the ceiling perpendicular to the window. In this case, the lines will run parallel to the flow of light, which will provide high-quality masking of the resulting joints. Follow the instructions below:

Cut out wallpaper strips along the length of the ceiling (take an extra couple of centimeters for tolerances - on both sides of the wall surfaces). Cut using a square, a roll along the line.
When sticking products with any images, be sure to number the cut strips. Then you definitely will not be mistaken with the correct arrangement of the elements of the picture.
Lay paper or plastic wrap on the floor.
With a roller with a long handle, or lubricate with an adhesive part of the ceiling surface on which the wallpaper strip will be glued.
Paste wallpaper. You need to align the edges of the strip with the markings applied earlier and firmly press the products to the ceiling. This operation is more convenient to perform with two people. One person gives the canvas to the second, who is under the ceiling (on construction goats or on another elevation). Do not forget to bring one of the edges of the canvas to the wall.
Smooth out the glued strip with a rubber roller or a plastic spatula from the center to the edges. Thus, you will not only level the wallpaper, but also remove all small air bubbles from under them.
Press the edge that comes onto the wall surface (very tightly) with a metal ruler (you can also use a spatula), after which you cut off the excess parts with a knife.
With a soft cloth, immediately wipe the glued strip, getting rid of traces of glue.

The next steps are simple. Glue butt to the first second non-woven strip, then the third to the second and so on. Do not worry about the fact that the joints between the wallpaper may disperse after the glue dries. With non-woven products, this never happens. Sections of the ceiling surface near the lighting devices are pasted over as follows: make a cruciform incision in the strip, pass through the incision made electric wires, press the interlining to the edges of the hole for the lamp or chandelier, mount the box (decorative). It will hide the cruciform incision.

Glued non-woven wallpaper should dry in the complete absence of drafts. Just do not open the doors and windows in the room for a while.

Wallpaper processing with paint is allowed only after they have completely dried. Coloring in progress water-based paints, water-dispersed, latex. Choose their shade to your taste. But do not forget that the color of the ceiling should be in harmony with the overall interior design of the room. In addition, pay attention to the following design tips before:

In rooms with low ceilings, as well as with a modest area, choose champagne, bluish or peach-colored paint. Such tones will visually lift and expand the room.
Fans of the traditional approach will suit all shades of white paint.
Young people are encouraged to paint the ceiling in bright colors.

Painting non-woven wallpaper on the ceiling

The process of painting non-woven ceilings is carried out with a short pile roller. Usually the surface is treated with two layers of coloring composition. The first should be applied perpendicular to the wall with a window opening, and the second - parallel to it. The use of this technology guarantees the absence of unattractive stripes on the ceiling.

The stucco elements on the ceiling are painted not with a roller, but with a brush. It is also used for processing any decorative details on the ceiling surface. And in cases where the walls were finished clean, their upper section must be pasted over masking tape. After painting the wallpaper, you will remove it and get clean walls, not spattered with paint.

How to glue wallpaper on the ceiling: useful tips.

Until about the middle of the last century, people did not really bother about the appearance of the ceilings in their houses and apartments, so most often they simply whitewashed them with chalk. But about 15-20 years ago, such repairs lost their relevance and people began to transform their living space with the help of brighter finishing materials. It was during this period that the fashion for wallpapered ceilings appeared.

Initially, only paper wallpapers were glued to them, but as vinyl, non-woven and liquid wallpapers began to appear on sale, they also began to be used to update the ceiling space. If you are also planning to wallpaper the ceiling, then let's figure out how to make sure that this coating served you for many years.

How to prepare the ceiling for wallpapering?

Preparing the ceiling for gluing

If you want the ceiling space in the renovated room to look perfect after all the work is completed, then be sure to pre-prepare this surface. It must be done necessarily as it will depend on this stage of work. correct docking separate pieces of wallpaper.

In view of this, before proceeding with the renovation of the ceiling, be sure to make sure that it does not have any obvious defects. If you find cracks and indentations, then you will have to repair them with a special putty. If at visual inspection it will be seen that the ceiling has a wavy shape, then you will have to spend more on its complete alignment.

Yes, and do not forget, after the entire surface is brought into perfect condition, it will definitely need to be primed. If you want to update the ceiling with wallpaper after whitewashing, then you will need to wash off all the chalk as thoroughly as possible, wait until everything dries, prime everything again, and only after that you can start gluing.

Ceiling wallpaper adhesive

If earlier it was possible to find only one type of glue on sale, now almost every wallpaper company is trying to offer customers glue of its own brand. Of course, this simplifies the selection of the adhesive base, but still, sometimes sellers, for the sake of earning money, sell people not quite what they need. That is why before you make a purchase, you should carefully look at the paper, vinyl or non-woven wallpaper you have chosen.

You will also need to check the glue packaging to make sure it can hold the heaviest wallpaper on the ceiling. And, of course, do not forget that the glue must be diluted strictly according to the instructions. Even if it seems a little thick to you, do not try to add water to it. If you make it too liquid, then in the end it will not be able to provide good adhesion of the finishing material and the ceiling surface.

Types of glue:

Special vinyl (for vinyl and embossed wallpapers)
Paper (for light and thin wallpapers)
Non-woven (suitable exclusively for non-woven wallpaper)
Adhesive for fiberglass (for heavy wallpaper for painting and textile wallpaper)
Universal (suitable for absolutely all types of finishing material)

How to apply and glue liquid wallpaper on the ceiling?

Recommendations for pasting the ceiling with liquid wallpaper

Immediately I want to say that liquid wallpaper should be applied exclusively on perfectly flat surfaces. If you try to update the ceiling without first leveling it, then after drying decorative material all flaws will be visible on the surface. If you do everything right, then the ceiling in the repaired room will look like a silk fabric playing with different shades.

At the very beginning, you will need to tightly close all the doors and windows that are in the room.
After that, pour the dry matter that is in the bag into a bucket or other deep container.
Add some coloring pigment to a little water and start mixing everything with a construction mixer
Add water in small portions until the mass in the bucket becomes like thick sour cream in consistency.
After that, let the mass stand for 20 minutes, mix it again and start applying to the surface.
To do this, put a small part of the wallpaper on the trowel and spread it over the ceiling in semicircular movements.
It is necessary to start fixing the mass on the ceiling space from the corner of the room
If you want to make the ceiling more textured, then approximately 4 hours after the end of the application, walk over it with a relief roller

How to properly glue vinyl wallpaper so that the joints are not visible?

Ceiling wrap tool

Vinyl wallpaper belongs to those finishing materials, which well disguise minor flaws in surfaces. In view of this, if your ceiling covering covered only with small cracks, then you can simply prime it and you can safely proceed to the main stage of work.

So:

To get started, use a building meter to measure the length of the first piece of wallpaper
When this is done, unroll the wallpaper roll and measure out the desired amount.
Add a few centimeters to it for circumcision and cut off a piece
Smear the wrong side of the wallpaper special glue, Special attention giving joints
After that, you can safely take a piece of wallpaper in your hands and fix it on the ceiling
Having applied at one corner, gently stretch it to its full length, and smooth out the bubbles remaining under the decorative material with a foam rubber sponge
Apply glue to the part of the wall where you will fix the second cut piece
Spread glue on the second piece, fix it at the edge of the ceiling, and then start joining the pieces together
Carefully connect them together and make sure that there is no overlap anywhere.
Smooth this canvas with a sponge, and then pick up a rubber roller and carefully walk it along the entire joint

How to glue non-woven wallpaper correctly so that the joints are not visible?

Wallpapering tips for ceilings

In principle, non-woven wallpaper is glued in the same way as vinyl, just in this case you will not need to additionally coat the wall with glue. The basis of this decorative material is made in such a way that even a small amount of adhesive contributes to good adhesion to the ceiling.

So:

Dilute the glue with water and let it brew
While it swells, take all the necessary measurements and cut off the first two pieces from the roll
Spread one of them with glue and attach it to the ceiling parallel to the wall
Smooth it out with a roller or soft cloth.
Spread glue on the second piece and join it with the first, avoiding an overlap
Continue gluing the pre-measured strips until the entire ceiling sheet is covered with wallpaper.
Remove pieces of material that hang on the walls with a sharp knife, after pressing them with a metal spatula

How to glue paper wallpaper correctly so that the joints are not visible?

Tips for wallpapering your ceiling

As a rule, paper wallpapers have a small thickness and for this reason they cannot mask defects in the ceiling sheet. In view of this, if you give preference to this particular decorative material, then you will definitely need to putty, level, sand and prime the ceiling surface. Also keep in mind that this material is afraid of excess moisture.

Therefore, apply glue to it carefully, otherwise the paper sheet will become very soft and begin to tear even before you begin to fix it on the ceiling. Yes, and do not forget that in this case, the joints must be additionally rolled with a rubber roller. If you do not, then after drying, they will begin to diverge and will be very conspicuous.

Tips for wallpapering the ceiling with paper wallpaper:

Prepare the ceiling
Prepare glue (you can use universal)
Cut off the pieces paper web desired length
Spread glue first on the wall, and then on the canvas itself
Attach it to the ceiling, spread it gently with your hands and roll it with a rubber roller

How to glue 3D wallpaper correctly so that the joints are not visible?

3D on the ceiling

If you want to stick 3D wallpapers in your house, then be prepared for the fact that you will have to do everything as carefully as possible. This type of decorative material is so fragile that it can be easily damaged if not used correctly and as a result, you will not get the desired effect.

That is why, before you start gluing them, sit down and carefully study the instructions that are on both the wallpaper roll and the pack of glue. As for the glue, it must be prepared strictly following all the rules that are indicated on the pack.

And remember, if it says that it must be stirred for five minutes, then this must be done. If you only mix it slightly, you will not get the desired consistency and will not be able to properly fix the wallpaper on the ceiling.

So:

Measure the length of the ceiling from one corner to the second
Cut two pieces of the same size from the roll
Spread the ceiling with glue and start applying the canvas to it
You need to start pasting from an angle that is not exposed to the sun's rays.
Using a foam sponge or soft roller, expel all the air from under the canvas
Reapply glue to the thread and start gluing another piece
Already at this stage, measure the parallelism of the pattern.
If the first two pieces are glued correctly, you can cut the rest and fix them on the ceiling surface

How to properly glue the wallpaper for painting so that the joints and painting of the wallpaper are not visible?

Recommendations for pasting the ceiling with wallpaper for painting

Wallpapers for painting are good because, if desired, you can easily change their color and even put some original drawing on them. If you also want to save on paint, then give preference to non-woven wallpaper for painting. As practice shows, in order for such a wallpaper to look perfect, only one layer of paint needs to be applied to it.

Be sure to close up all the defects on the ceiling and plaster it
Cut a piece of the desired length from the roll and run it through the middle with a brush dipped in glue
Next, begin to evenly distribute the glue over the entire surface of the canvas.
Fold the canvas with an accordion in increments of 25 centimeters
Glue the ceiling with glue and start fixing the wallpaper on it
Press the canvas to the surface with a flexible spatula, and then drive out the remaining air and excess glue with a soft roller

How to glue wallpaper on the ceiling?

Although photo wallpapers are glued according to the same principle as ordinary wallpaper, updating the ceiling with this method is still a little more difficult. In this case, you cannot afford to simply cut off pieces from the roll. right size and fix them on the ceiling. Since the photo wallpaper is nothing more than a huge drawing, you will need to fold it like a puzzle and do it in a not very comfortable position.

In view of this, it would be better if you carry out such decoration of the space in the room with one of your relatives. In this case, the person below will immediately be able to see that the drawing does not add up correctly and you will not have to redo everything when most of The photo wallpaper will be glued to the ceiling surface.

So:

Initially lay out the photo wallpaper in the room and see how many parts it consists of
Cut off all the white parts and fold it in such a way that you do not mix up the pattern.
Take a level and a simple pencil, and mark the ceiling
Ideally, you should divide it into squares, the size of which should correspond to the size of a piece of photo wallpaper
In case you do not want to do this, then mark at least the first row of squares, and then move further away from them
After the markup is done, you can smear the ceiling with glue and fix parts of the photo wallpaper on it

How to glue ceiling wallpaper on your own on a plasterboard ceiling?

Wallpapering the ceiling

Some people believe that you can glue wallpaper on drywall without any pre-training. But in fact, even such an ideal flat surface need to prepare for further finishing. If you try to update the ceiling by simply priming the surface, then in the end all the joints that exist between the pieces of drywall will be visible on it.

So:

First, clean the drywall surface from dust and prime it thoroughly.
Next, take putty and seal all the seams
When it dries, sand these areas sandpaper
Then again dilute the putty to the consistency of thick sour cream, and this time stretch the entire ceiling sheet with it
At the next stage, again grind the surface and prime everything again
When the primer is completely dry, proceed to the standard wallpapering procedure.

Elimination of cracks on the wallpaper, on the ceiling

In case you saw ceiling wallpaper a crack, it's not worth much to get upset. If you show a little patience, you can mask this defect and you will not have to completely re-paste the ceiling space.

So:

To get started, prepare spicy construction knife, universal glue and quite a bit of sealant in a tube with a gun. When everything is ready, proceed to seal the resulting crack.
To do this, sprinkle this place with water from a spray bottle and wait until the wallpaper begins to move away from the ceiling. But do not overdo it, if you wet them too much, then in the end they may tear and then the defect will definitely not be able to be removed.
As soon as the wallpaper begins to move away from the surface, take a knife and make a neat cut along all the lines of the crack. Then spread the wallpaper so that you can easily see the cracked ceiling.
Carefully seal the crack with sealant, level everything and wait until it seizes. On the final stage grease the wallpaper with glue, wait 5 minutes and bring the two parts together.
You have to glue these two halves in the same way as you glued two pieces of wallpaper. If you are not in a hurry, then you will not get an overlap, and after drying, this place will seem perfectly even.

Tips to help you properly paste ceiling wallpaper

As you probably already understood, if you follow the generally accepted rules, then wallpapering will pass without any problems. In view of this, in no case do not rush and try to do all the stages of this process as correctly as possible.

Tips to help you properly paste ceiling wallpaper:

Always pre-prepare the ceiling for gluing
Dilute the glue strictly according to the instructions
Make sure that the temperature in the repaired room does not fall below +5 and does not rise above +25
Keep windows and doors closed while wallpapering and during the entire drying period of the wallpaper.
Glue the first strip in the brightest place in the room
Apply glue with a soft brush and make sure that its layer is not too large.

Can wallpaper be applied to ceiling tiles?

I want to say right away that ceiling tiles is the most unsuitable basis for wallpaper. If you glued it yourself, then you probably know that it falls off quite easily. Now imagine what you put on it wallpaper glue, and then fix the wallpaper itself.

It is clear that all this will have weight, which after some time will break the adhesion between the tile and the ceiling, and in the end it will begin to fall off. And since wallpaper will be pasted on it, they will fall off with it. In view of this, if you do not want to spend money in vain, then it is better to remove the tiles from the ceiling and only then glue the wallpaper on it.

Wallpaper on the ceiling: modern design

Below you can see photos showing modern design ceiling space. After reviewing them, you can get a better idea of how beautiful and original a ceiling can be pasted over with ordinary wallpaper.

Idea #1

Idea #2

Idea #3

Idea #4

Idea #5

Video: How to glue wallpaper on the ceiling, all the nuances, (repair in the apartment)

One of the popular options for finishing the ceiling is pasting it with wallpaper. It is not only fast, but everyone can do it with their own hands. For such a case, patience, attentiveness and a small volume are required. useful information. It is thanks to this article that you will learn how to glue wallpaper on the ceiling quickly and easily, what is the difference between the technique of pasting non-woven and vinyl panels, and a number of other tips that will make finishing work easier.

Wallpaper - best way ceiling finishes. Respectable appearance over a long period, relatively cheap material and the ability to do do-it-yourself pasting increases their popularity. But only high-quality canvases and compliance with all the subtleties of the upcoming work can guarantee the achievement of all these advantages.

The modern building materials market provides a wide range of panels for the ceiling. Their main difference from wall panels is their light weight. (1 m must weigh no more than 110 g) at higher density. They do not get wet, it is more difficult to tear and hold firmly. There are models with the possibility of updating by painting with special solutions.

As for the structure of the material itself, there are several suitable options: vinyl and non-woven. They differ in the technique of pasting. How to glue vinyl and non-woven wallpaper on the ceiling correctly, we will consider in more detail.

Features of gluing vinyl wallpaper

Vinyl wallpaper will last about 5 years without noticeable changes in color. Dense structure, resistance to moisture allow you to stick them yourself. In order to avoid the visibility of joints (seams), it is recommended to place wallpaper cuts in a certain sequence (as in a roll). After cutting, they mark the top and bottom.

For vinyl products, buy a special, reliable adhesive. It guarantees fast and strong adhesion to the ceiling area in a short time. It must be applied in an even layer on the entire canvas. After that, the wallpaper strip is folded into an “envelope”. Only after that proceed to the distribution of the adhesive mass on the working surface.

The next steps are universal. Wallpaper is attached to the ceiling. Then excess adhesive solution and air particles are expelled with a plastic spatula, elastic sponge or roller (depending on personal preference).

Subtleties, the procedure for sticking vinyl products, see the video

Features of gluing non-woven wallpaper

Non-woven products do not require prior cutting into separate sheets, like vinyl or paper. In addition, glue is applied only to the ceiling. This saves not only the cost of adhesive solution, but also reduces the time for gluing. In addition, they are very dense, so they allow you to hide surface irregularities.

Non-woven products simplify the process interior decoration, and it is really possible to do the gluing work alone. Apply glue to the working part of the ceiling. As the roll unwinds, attach the wallpaper with smoothing movements from the center of the strip to the treated surface. Finally, cut off the wallpaper in the required place with a clerical knife.

In the video, you can clearly see how to glue the wallpaper on the non-woven ceiling with your own hands.

List of required tools

Regardless of the type of wallpaper chosen for gluing, you will need:

Stepladder, rack.
Container for adhesive solution.
Brush, roller for spreading glue.
Roulette for the necessary measurements.
Rag, piece of cloth.
Stationery or ordinary sharp knife.
Scissors.
Pencil, marker for marking.
A plastic spatula or roller, necessary for smoothing the wallpaper.

The specified arsenal is quite enough for gluing panels on their own.

Surface preparation and adhesive solution

Before you stick wallpaper on the ceiling with your own hands, you need to properly prepare the work surface.

de-energize sockets and other outlets from electricity;
free up space in the room as much as possible so that there is no interference in the future;
remove old wallpaper;
seal problem areas, joints and connections of structural elements with a special solution. After drying, sand the corrected places with sandpaper to perfect smoothness;
the effect of direct sunlight on the newly pasted wallpaper does not affect in the best way, therefore it is recommended to cover the sunny side with a piece of cloth or paper;
drafts, open windows and doors, the included air conditioner will only harm, exclude their presence before gluing;
treat the working area with a soil solution 2-3 times. Each subsequent layer is applied after the absolute drying of the previous one;
for convenience, mark a visible line under the first wallpaper strip.

An equally important question in preparatory stage- preparation of glue. Follow the instructions. To avoid the appearance of lumps in the composition, it is recommended to add the dry mixture in small portions, stirring continuously. Leave the prepared adhesive mass for 20-30 minutes for high-quality swelling.

Pasting process

Let's take a closer look at how to glue wallpaper on the ceiling quickly and efficiently with your own hands.

The gluing process includes several basic techniques:

for sticking paper and vinyl sheets, glue is applied to both surfaces (both wallpaper and ceiling). The adhesive solution is distributed with a brush, roller evenly, in the direction from the central part to the edges. The glue should take some time to soak in, for convenience. vinyl wallpapers fold in half inside. In the meantime, spread the adhesive over the working surface of the ceiling. After 7-10 minutes, proceed to pasting it;
for non-woven materials, it is not necessary to apply glue to the canvas, only to the ceiling part. But keep in mind that the adhesive mass for non-woven wallpaper is thick. It must be applied in an even dense layer;
attach the first strip according to the markup. Its edge should coincide with the drawn line;
for tight adhesion to the ceiling area, removing excess glue and preventing swelling of the canvases, perform smoothing. Movement should be directed from the center to the side. To do this, use a rubber roller or wallpaper spatula;
apply subsequent strips end-to-end to the previous ones;
folds are not allowed. If they do not smooth out, then carefully separate part of the canvas and re-coat it. After that, try gluing the wallpaper again. Drive excess glue to the edges of the canvas and remove with a clean cloth;
make sure that the edges of the canvases fit snugly, correctly against the ceiling surface. Walk several times with a spatula along the joints. This will prevent them from peeling off in the future;
canvases should be 1-2 cm on the side wall. After drying, excess paper will be removed with a sharp knife;
so you should be able to smooth surface without swelling and visible wrinkles. You don't have to worry about small wrinkles.

During the drying process, they will smooth out on their own.

Additional subtleties of pasting the ceiling with wallpaper are shown in the video

Wallpaper sticker rules

In how to stick wallpaper on the ceiling with your own hands, so that they last for more than one year, the following recommendations from experts will help.

Long or wide?

It is difficult to answer this question unambiguously. The shape and relief of the ceiling can influence the location of the stripes. But in standard cases, in order to visually hide the joints of the finish, it is recommended to place the canvases perpendicular to the direction of the light flux.

Wallpaper cutting

Paper, vinyl canvases must first be cut. When determining the length of the strip, consider allowances of 4-5 cm for entering the walls. The overlap allows you to avoid gaps in the case of "shrinkage" of the wallpaper when it dries.

Some wallpapers require a selection of a pattern. Please note beautiful view finishing depends on the strict observance of the pattern.

Glue wallpaper in the corners

The angle for many beginners causes great difficulty. The corner sticker technique consists of the following steps:

Carefully bring the wallpaper strip into the corner and make a noticeable mark with a marker, pencil. Do not overdo it with embossed products so that there are no kinks later.
Release the wallpaper and cut out the marked part.
Now you can stick the corner itself.

This technique is suitable for hard-to-reach places, kinks and areas under the chandelier.

Wallpaper should be glued in such a way that the glue does not have time to dry, and the material is soaked. Speed of action is an important factor in finishing works. Therefore, additional assistance is recommended. The assistant should hold the wallpaper strip, correct its location, suggest visible shortcomings, or give a tool if necessary.

Wallpapers hide structural irregularities, do not require regular updating and will last a long time. Yes, and in terms of price - the method is quite acceptable, especially if you glue it yourself.

This article reveals the main issues that may arise when finishing the ceiling surface with your own hands. Visually consider how to glue wallpaper on the ceiling will help the video.