Making sofas with soft upholstery with your own hands. Comfortable sofa with your own hands: instructions with photos Do-it-yourself wooden sofa design solutions

M Fucking, especially soft, is not a cheap pleasure. And the store does not always have models that are suitable in size or design. Moreover, if you, for example, want to furnish country house, where there is no need for special delights, spending a lot of money is simply not a good idea.

The solution is to master the basics of furniture making and make the desired item yourself. In this case, you will receive quite tangible benefits:

Saving on purchasing furniture.
By saving on furniture repair costs. If you learn how to make new furniture, repairs will not be difficult.
Finally, win a bet by betting that you can make upholstered furniture yourself, literally “on your knees”!

Upholstered furniture base - pillow

The soft elements of modern furniture sometimes represent complex multi-layer structures made of fabric, mesh and springs. Making such a mattress or seat yourself is not a realistic task.

However, it is easy to make quite comfortable pillows for a sofa or chair yourself from a thick foam rubber plate.

In addition to foam rubber, we will need two types of fabric and a zipper. We take natural fabric or with minimal addition synthetic fiber to avoid harmful electrification.

At first sew the inner cover, leaving one of the ends open. Any non-dyed dense fabric such as calico will be suitable for it. We put the cover on the pillow, tuck it in and sew up the open side with large stitches. The cover should fit the foam tightly, protecting it from wear and tear.

Now sew an outer cover. It provides an attractive appearance to our pillow and protects it from contamination. To be able to remove the cover from the pillow, we sew a zipper on the side. When cutting, we make the dimensions a little larger than necessary, taking into account possible shrinkage of the fabric during washing.

By laying several of these pillows on a simple frame or even just on the floor, we get soft bed, ottoman or sofa.

Making a soft stool with your own hands

The basis for the soft part is wooden base. Let's study the basic operations for its manufacture, using the example of a stool with a soft seat. Despite its simplicity, its assembly uses the same principles and techniques as for the manufacture of much more complex types of furniture.

Tools you will need:

wood hacksaw with small (1.5-2 mm) teeth;
figured screwdriver (cross);
hammer;
awl;
tailor's scissors;
needle with thread;
a sharp knife (a mounting knife with a replaceable retractable blade is suitable);
pliers;
drill or brace.

We place a soft pad on the seat, pull on the cover, place its edges from below under the seat and secure it with staples.

The stool is ready. Now it is advisable to make linings of thick rubber on the lower edge of the legs. You can buy suitable fittings at a furniture store.

The soft part itself can be framed along the edge of the seat with plastic edge tape or with a cord, nailing it with decorative nails.

Give free rein to your imagination, and using this principle you will be able to make the most bizarre and unusual furniture products.

Making more complex upholstered furniture with your own hands

Having mastered the basic operations of making upholstered furniture using the example of an ottoman, you can move on to more complex products.

Corner furniture will help you properly arrange a recreation area in a small living space. It fits perfectly into the geometry of the room, retains maximum usable area, providing enough space for guests. You can save money on buying furniture of a similar configuration if you assemble corner sofa with your own hands, demonstrating not only skills in working with various materials, but also the ability of a designer. The main thing is to be extremely careful in your work, not to rush, and the result will delight you with beauty and durability.

Assembling a corner sofa with your own hands, if you have the appropriate tools and materials, will not cause difficulties even for novice craftsmen. Such upholstered furniture will help zone the space of the room. Equipped with spacious drawers, corner sofas can accommodate many household items.

When wondering whether it’s worth spending time searching for the right model in the store or whether it’s easier to build a sofa with your own hands, we pay attention to the following points:

furniture assembled by hand always fits into the interior of the room and is ideal in size;
choice color range upholstery does not depend on the assortment provided by the manufacturer;
by making a soft corner yourself, you can minimize costs;
When assembling a kitchen corner sofa with your own hands, you can personally control the quality of the product so as not to have doubts about its strength and durability.

The main advantage of assembling a soft corner sofa with your own hands is aesthetic pleasure, a feeling of pride from the work done. During the production process, you can feel like a real designer and acquire useful skills. They will strengthen positive emotions rave reviews from others.

Materials and tools

Will help save time and money detailed diagram corner sofa devices. It is also recommended to make a list in advance necessary materials and tools. In the process of creating furniture you may need:

timber coniferous trees(used for frame);
plywood (preferably birch) is needed for covering the base;
Fiberboard is useful at the stage of installing the bottom and assembling storage boxes;
laminated chipboard is most often used for making armrests;
soft materials (foam rubber or padding polyester) are indispensable when stuffing the back of a sofa or pillows;
upholstery fabrics (thick fabrics impregnated with special water-repellent compounds that protect against excessive contamination);
fasteners (corners, screws, nails);
retractable mechanisms for drawers;
furniture legs (it is more convenient to use elements on wheels);
consumables (threads, glue).

One of important points making a corner sofa with your own hands is correct selection necessary tools:

saw - for cutting large wooden elements;
a screwdriver, without which it is very difficult to quickly assemble any structure;
sewing machine (preferably electric) – for sewing covers;
a furniture stapler that allows you to firmly fix the fabric in the right places.

Depending on the complexity of the design, the minimum list of necessary devices may be expanded during the work process.

Furniture fittings

Upholstery fabrics

Drawings and diagrams

Competently compiled drawings and diagrams for assembling a corner sofa with your own hands determine the quality of the final result. Sketches should be extremely simple and understandable. The basic principle is to describe the size and location of all parts of future furniture. After the drawing of the future soft corner has been drawn, a detailed diagram of the location of all fasteners, reinforcing parts, partitions, and, if necessary, drawers is drawn up.

Some expert recommendations will help you do everything correctly:

When choosing the dimensions of furniture, it is important to measure in advance the place where it will be installed;
first of all, a sketch is drawn, which necessarily indicates the length of the two halves of the sofa, its depth and the height of the back (this parameter can be arbitrary);
the width of the sofa frame is calculated as the difference between total length two halves and depth.

The main points that are taken into account when creating a drawing of a sofa:

back angle;
dimensions of the entire structure and its individual parts;
the need to install folding mechanisms;
the need to arrange storage compartments;
height of sofa legs.

A secret from a professional: for ease of reading drawings and diagrams, when creating them you must use different colors for each material.

For example, a base made of timber is shaded yellow, surfaces made of chipboard are shaded with gray, areas of upholstery with foam rubber are shaded. pink. The direction for tightening the screws is drawn with red arrows. This will help you quickly navigate and significantly reduce time costs.

Step-by-step manufacturing instructions

Let's consider step by step how to make a corner sofa with your own hands. In accordance with the previously drawn diagram, the parts must be numbered and laid out as they are introduced into the work. The smallest elements must be set aside separately from large parts. You can cut timber, fiberboard and chipboard panels yourself, but it is much easier and faster to order the work from professionals. Assembly begins with large parts

, gradually building up small elements onto the base.

All components are connected to each other with screws. To enhance strength, each part is first glued, and only then the two parts are pulled together.

Creating a wireframe

Assembling a sofa begins with creating a frame made of timber. Two long and two short blanks are connected into a rectangle. After the beam is fastened with self-tapping screws, metal corners are attached to the corners. Additional transverse supports are fixed in the center of the backrest. This ensures the strength of the sofa base.

The bottom of the corner sofa box is sewn up with a fiberboard sheet of the appropriate size. To fix the material, use special small furniture nails or a stapler with staples (which is much easier and faster). The second half and the corner insert are made using the same principle. After all three parts of the corner sofa base are assembled, they are fastened together with bolts and nuts.

A washer placed in front of the nut will help protect the wood from damage by metal fasteners. chipboard sheet or plywood. The upper end is covered with a piece of wood cut at an angle.

Next, the seat hinges are fixed to the frame (at the rate of three pieces for each element). The hinges are secured with self-tapping screws at the junction of the side board and the pepper beam. They are fixed on them fiberboard sheets, which will later become the basis for soft reclining seats. Interior The sofa will be a convenient storage place for various household items. The final step of assembling the frame is covering the back part with fiberboard and installing furniture legs around the perimeter of the corner sofa.

Assemble the frame

Sew up the bottom of the box with a sheet of fiberboard

Fix the seats and niche

Upholstering the frame of a corner sofa is not difficult if you strictly follow the following recommendations:

the thickness of the foam for the back and seat should be greater than for the armrests (at least 10 cm);
Before cutting, measurements are carefully taken;
In order not to get confused, it is better to immediately glue the cut piece from foam rubber to the right place (we use regular glue PVA);
You can give the desired bend and shape to the soft part by cutting off the thickness of the foam rubber in certain areas;
if you want to make a beautiful bend in the back, you can use twine and small pieces of foam rubber, placing them in the right places soft material and clamping it with twine, forming the necessary relief;
Before the fabric upholstery stage, it is better to cover the foam rubber with a layer of agrotextile.

No need to throw away foam scraps. From them you can cut small pieces of soft cladding to suit the size.

Fabric upholstery

The pattern of covers for a corner sofa with your own hands consists of individual elements– for upholstery of seats, sides, facades, backs. Most often, when assembling a corner sofa for the kitchen or living room with your own hands, the following fabrics are used:

Matting is a very durable material that is resistant to abrasion and dirt, allowing you to create a surprisingly pleasant to the touch, soft surface. An undeniable advantage is its durability. Having upholstered furniture with such fabric, you can forget about changing covers for many years. The matting has a high density, holds its shape well, and does not wrinkle.
Cotton fabrics attract naturalness. They allow moisture and air to pass through and are distinguished by their bright colors. But when choosing such covers for a corner sofa, you need to be prepared for their frequent replacement. They quickly become unusable, wear out, and lose color. If a corner sofa is going to be used in the kitchen, it is better to avoid natural fabrics of this type.
Flock – a good option. The fabric, soft and velvety to the touch, is distinguished by its practicality due to the nylon and nylon threads in its composition, and is resistant to dirt and exposure to sunlight. When assembling a sofa for the kitchen with your own hands with flock upholstery, you can be sure that even after a couple of years the covers will look the same as on the first day.
Leather is an expensive material that allows you to create very beautiful, practical furniture. Leather covers for a corner sofa are not only a way to preserve the original appearance for as long as possible (they do not fade, do not wear out, and are easy to clean), but also an opportunity to add elegance to the furniture.

After measuring the sofa, we make a pattern on paper. We redraw the pattern onto the fabric and cut out the details (with seam allowance). To appearance The upholstery was neat, the textiles for the covers were thoroughly ironed in advance. The cut material is thrown onto the foam upholstery and secured with a stapler. For lovers of comfort, coziness, corner folding sofa you can add it yourself soft pillows, sewn from the same fabric as the main upholstery.

When choosing a sofa for their apartment, people are often faced with the problem of the lack of models with a color or finish that matches their interior, or the required dimensions. One solution to this problem is to make a sofa yourself. With this approach, it becomes possible to fully realize your imagination and creative inclinations. In this article we will look at how you can make a simple sofa from pallets and wooden boards for your kitchen, balcony or even living room.

How to make a sofa with your own hands at home

Stylish and modern furniture does not have to cost a lot of money and be made from expensive materials. For a real owner who has the necessary set of tools and skills to work with them, it will not be difficult to create a sofa with your own hands at home. This guarantees the quality of the assembly and materials used in the work, and will also save a significant amount of money on buying new furniture in the store. Even made from old pallets or ordinary pine boards, this main element of any interior will attract attention and delight the owners for many years.

So, what do we need to make a sofa? Let's look at the lists the right tools and materials.

Required tools:

Electric jigsaw or hacksaw;
Screwdriver or screwdriver;
Roulette;
Stationery knife for cutting foam rubber;
Fabric scissors;
Stapler for fastening upholstery elements.

At the initial stage of work, it is necessary to make a drawing or sketch of the sofa, clearly determine the layout and overall dimensions. After creating the drawing, it is calculated required amount materials.

Materials to be used:

Beam with a section of 50×50 mm;
Any sheet material;
Furniture foam;
Furniture synthetic padding for the back;
Upholstery fabric;
Thread for joining fabric;
Wood glue;
Self-tapping screws;
Pencil.

When making a sofa with your own hands, you can also use any suitable materials, which remained after the renovation or construction of the dacha. These can be boards, timber, sheets of plywood or MDF, necessary to provide additional rigidity to the structure. The missing material must be purchased.

How to make a sofa: step 1. Making the frame with your own hands

The basis of any sofa or bed is the frame, which bears the entire load. In order for furniture to last for a long time, you need to take its assembly responsibly. The frame of the sofa is created from durable boards (ideally solid wood, or high-quality and thick plywood), which are fastened with self-tapping screws. To give additional strength, you can use metal corners and wood glue, which are used to coat the joints of the wooden parts of the frame. After creation wooden frame, it is sheathed sheet material. Those parts of the frame that will not be covered with fabric should be treated with sandpaper and covered with stain, paint or furniture varnish.

How to make a sofa: step 2. Create a comfortable backrest

When you create a sofa with your own hands for the kitchen or balcony, you can get by with sewing thick pillows under the back. A distinctive feature of sofas in the living room is the mandatory presence of a backrest, which allows you to comfortably spend your free hours on the sofa.

Depending on the chosen design of the sofa, you need to decide on a comfortable angle of the backrest, and then secure it firmly. An interesting idea for creating a sofa back is presented to you in the following photo.

Step 3: upholstery, seats and cushions for the sofa

When making a sofa with your own hands, the easiest solution is to buy ready-made seats of the appropriate size. But if you have the desire and a sewing machine, it will be easy to sew them yourself. For seats, you need to cut pieces of foam rubber of the appropriate size, wrap them in a soft material like padding polyester, and then cover them with purchased fabric. Great solution will sew zippers into the pillows, which will allow you to conveniently remove the covers for washing in the future.

A more difficult undertaking would be to create full-fledged upholstery. Step by step instructions with photos you can find in our article Restoration of upholstered furniture: reupholstery or replacement of upholstery.

Creating a sofa with your own hands is a great opportunity to show your skills as a craftsman and create stylish item interior We invite you to enjoy the photo for inspiration. homemade sofas from different materials.

Original do-it-yourself sofa made from pallets

One of the most popular ideas today is to create a sofa from pallets with your own hands. These pallets are also called pallets. They are inexpensive and easy to get at any hardware supermarket. Pallets consist of several boards, which are very convenient to disassemble and can then be reassembled into any design convenient for you. All that remains is to paint them in the desired color and make cushions for the sofa. See the photo below for examples of homemade sofas made from pallets:

Important: If you decide to make a sofa from pallets, then when purchasing them you need to pay attention to the condition of the wood - there should be no damage or obvious signs of dryness and old age. In any case, to create a high-quality sofa with your own hands, the pallets should be sanded and a protective coating applied, for example, using a special wood impregnation or varnish. Euro pallets have standard dimensions of 800x1200 mm, so you can easily calculate the required frame size.

How to make a corner sofa for the kitchen

An excellent idea for creating a sofa for the kitchen with your own hands are reclining seats, which allow you to arrange storage for kitchen items inside and at the same time simplify the process of making a sofa. The bottom and side walls of the box will provide strength and additional stability to the structure.

Comfortable sofa do it yourself: instructions with photos updated: May 22, 2017 by: Andrey Zinchenko

The sofa is one of the most noticeable pieces of furniture in any home. It can help you relax after every difficult, tiring working day. But since it is not always possible to buy a sofa that is suitable for its design and price, it is possible to build it with your own hands. This article can help you with this.

Manufacturing options

There is a huge variety various types sofas made from materials to suit every taste. Everyone can find the one that suits them perfectly: a product made of pallets, wood, timber, plywood or other types of materials. Below are more detailed descriptions of each type.

From pallets (pallets)

Today, furniture made from scrap materials and waste released after construction is extremely popular. Of course, different factories offer many interesting species and furniture designs, but original sofas, for example, made from pallets (pallets), will become unusual decoration any interior.

photos

Pallets are wooden platforms; they are available in every construction store. The reason why they are very often used in DIY home furniture construction is because they are cheap. To create such furniture you will not need any special skills; the most important thing is to come up with the design of the structure.

photos

To create a sofa from pallets with your own hands, you need, of course, square or rectangular pallets, a saw, a hacksaw, nails, screws, and a hammer.

photos

Made from wood

Such sofas are distinguished by their durability and reliability, as well as their attractive appearance and special atmosphere. Their only drawback is their high, unaffordable cost for many. Although creating such furniture is not an easy task, it is worth it.

Firstly, a wooden sofa made by yourself will fit into any interior, since it will be created based on the design of the room. Secondly, it can be given any shape, even the most unusual.

photos

Wood is a malleable material. Everyone is quite capable of making a sofa out of wood on their own.

From timber

Most optimal timber for the manufacture of any furniture - it is one-piece, chamber-drying. You can choose any type of timber. It could be pine, ash, larch or, for example, oak.

The technology for assembling such a sofa is not particularly complicated. Many people can create real masterpieces from this material.

From plywood

Plywood is another very economical, cheap material. You can use it to create functional, comfortable, truly unique furniture. The simplest sofa project made from plywood is a sofa made from plywood-covered drawers. This is a very lightweight and yet functional option.

From a profile pipe

After installation and repair work, there are always unnecessary materials left, which we very often simply throw away. But there is no need to rush to do this, because they can come in handy if you want to build a sofa for your living room or bedroom yourself.

Sofa from profile pipe- the thing is quite unusual. Many guests will be jealous of such unique and stylish furniture. In addition to its original appearance, such a sofa is very durable and can last for several decades.

By collecting a sufficient amount of profile pipe, you can build a high-quality sofa. It is enough to familiarize yourself with the not very complex algorithm for working with a pipe and work a little.

Made of metal

This option is perfect for a summer house or garden. Metal can be easily found on any construction market, store. Metal furniture is easy to assemble if bending is used tubular elements. If you practice working with metal, you can easily make an excellent addition to your interior.

From a metal profile

To make a homemade sofa more reliable and durable, you must, of course, use the appropriate materials. If you use metal and metallic profile, a sofa created independently will not differ at all in terms of strength from one purchased in a furniture store.

Frame leather models

Price leather goods prices on the market are now extremely high, and purchasing such a sofa can seriously hit your wallet. By making a frame, upholstering the body with several layers of foam rubber and upholstering the product with leather, you can get a wonderful sofa of no less low quality than in many furniture stores.

Leather sofas always look luxurious and very stylish. Such furniture can make the interior of any house or apartment beautiful and elegant.

Leatherette

Artificial materials can be no worse than real, natural ones. In the event that finances do not allow you to purchase leather for upholstering a homemade sofa, it is possible to create a sofa from leatherette. In appearance, most likely, it will not be much different from its natural counterpart, but it will save your budget a lot.

From chipboard or laminated board

These types of sofas are far from the most reliable of all, but they are the cheapest. They have a beautiful, aesthetic appearance. Easily amenable to wet cleaning.

It is worth keeping in mind that, as a rule, furniture made from chipboard and laminated chipboard is heavier. Also, this material is quite brittle, and you should be careful with it.

From MDF

Fiberboard medium density, or MDF (from the English “Medium Density Fiberboard”) is a material of a higher cost than chipboard, while having, compared to the latter, a number of advantages. Firstly, it does not emit substances harmful to human health. Secondly, it is twice as strong. Its main advantage is that a wide variety of furniture can be made from it, because MDF can imitate wood, metal, and even glass.

MDF board is very easy to work with, it lends itself to many in various ways processing. From of this material you can make sofas of various designs and types, while being very wear-resistant and harmless to the health of family members.

Creating new from old

Sooner or later, time takes its toll on any furniture: it stops looking as beautiful, fashionable and new as before. The same thing happens with sofas. What can you do if the old one has already outlived its usefulness, but you don’t really want to spend money on buying a new one, or your finances don’t allow it? There is a solution: converting an old sofa into a new one.

Most often, it happens that it is not the frame of the sofa that deteriorates, but its upholstery. Replacing it is not at all as difficult as it might seem at first glance. You will only need some materials, such as foam rubber, silicate glue and others, and a little effort.

First you need complete dismantling coverings or upholstery. In this case, the first step is to remove the armrests, then the transformation mechanism, sides, backrest and seating areas. Next you need to prepare and cut the fabric for the upholstery. After preparing the fabric and cutting out the foam lining, you can proceed directly to the stage of upholstering the sofa.

From chairs

Human imagination is limitless, and you can see this by watching video tutorials on YouTube or reading articles on the Internet from people who create furniture from a wide variety of objects. There are several options you can take note of. For example, if you have two or even three unnecessary chairs at home, you can turn this useless furniture into useful, and also new, furniture. For example, you can do full sofa!

To bring such an interesting idea to life, you need to follow the following simple instructions. After removing the seats, wrap your chairs together with tape. Then put the seats back in. Rewind to them plastic bottles(alternatively, you can use any other materials) to add volume.

The most important thing remains: cover the resulting structure with padding polyester, put on a pre-sewn cover (a huge plus: you can choose its design yourself). Voila! The real sofa made of chairs is ready.

From tires

Very often we all see various things made from tires at our dachas. These are flower beds in the form of flowers and, for example, swans. But not only these things can be made from this material. One of the most unusual options- a sofa made of tires.

It would be better to make the seats on the sofa intended for the garden removable. Then you can bring them indoors whenever you want. For tensioning, it is worth using ropes made of nylon, as well as rope. They will be very useful, as they do not rot. An interesting idea would be to make a stretch on the sofa seats in the shape of a “dream catcher”.

As you can see, there are endless options for DIY sofas. To make it, you only need a diagram, the necessary materials such as fabric, padding polyester or foam rubber, and a little imagination and creativity. Functional, comfortable, stylish and unusual furniture can be made from a wide variety of available materials. A sofa created independently on your own can have any style, size (long, large, small), in a word, be whatever you want, exclusive.

How to do it at home?

The main advantage of homemade sofas (besides the low cost), thanks to which they are relatively popular, is that their owner can choose all its components: the desired backrests, seats, armrests. You can choose a structure or frame that is suitable for a particular house (for example, Biarritz).

Below are detailed instructions, a step-by-step master class on making various types of sofas at home.

Let's start with the fact that frame sofas are also divided into several types. These include:

rectangular;

sliding;

U-shaped;

folding;

with concave sides;

dastarkhan;

baby;

built-in (for example, in a closet);

carved.

Instructions for creating a frame product

The instructions show a diagram for making the lightest and most typical sofa - a rectangular frame sofa.

Required tools: jigsaw or hacksaw for wood, furniture or mechanical stapler, grinder, screwdriver, sharp screwdriver, scissors, sewing machine, tape measure, sharp knife.

Materials: bars (40-50 mm), plywood or other sheet material, foam rubber (thickness - 50 mm), padding polyester, furniture fabric, wood glue, thread, screws, markers.

First you need to do the basics - frame. Its support consists of wooden blocks, the cross-section of which is 40-50 mm. The frame is assembled using a screwdriver and a self-tapping screw. For connection wooden parts special construction adhesive is used. The average length of a sofa is 3 m, but you can use any length to suit your taste.
Followed by make a sofa frame from boards. For convenience, you can also weave the entire frame structure with special furniture straps.

Next you will need make the back of the sofa, cover it with plywood or other sheet material. It is best and easiest to use the simplest shape of the back - a rectangle.
Just like the back, they are made of plywood. side backrests . Their most common shape is the same rectangle.

Next stage- This pasting with foam rubber. Here you will need foam mats. Matami the right size It is required to paste over the back (top and front), as well as the sides. Next you need to strengthen it all with glue. The glue is usually used either as a brush or as a spray. When the application of glue is completed, you need to leave it for a while.
Next material, which is required to make a sofa is padding polyester. It is needed to hide all uneven places and add additional volume. Sintepon will make the sofa more comfortable and soft. First you need to grind the sharp corners on the frame. Then you can start upholstering the sofa with padding polyester.
The following is upholstering the sofa with fabric or leather(optional). You can find the necessary patterns for a case on the Internet and make it yourself, or contact a workshop. Next, you need to put a cover on the sofa, using a furniture stapler if necessary.

Sofa assembly – final stage. Finally, you need to assemble all the seats and everything else together. Ready! You can build such a sofa in about 3-4 days. This is an easy and economical way.

Step-by-step guide to creating a frameless model

Required materials and tools: furniture fabric of the required type, 2 foam sheets, 7 pieces of zippers, reinforced threads, glue, sewing machine, measuring tape, chalk, sharp scissors; 8 foam blanks, 2 pieces each - square (80 by 80 cm), rectangle (60 by 80 cm; 20 by 80 cm; 30 by 80 cm).

At the very beginning, you need to make four out of eight foam rubber blanks. To do this, each pair must be glued together using PVA glue.
Making the first part. You need to find patterns for a sofa without a frame on the Internet. Let's mark 3 strips of fabric, size - 20 by 160 cm. Two parts need to be sewn in half, attaching zippers to them. Next we stitch the opposite two sides.
Next you need to sew the squares and stripes according to the suitcase principle. We process the edges from the inside of the products using an overlocker.

The manufacturing method for the remaining parts is the same. Therefore, further we will consider only their sizes and some other nuances.

We mark 2 rectangles (60 by 80 cm) on our fabric, then cut them out. Next you need to cut out a strip for them (20 by 120 cm). Next - two strips 20 by 160 cm. We assemble a cover from them.
Next, you need to cut out rectangles with a size of 86 by 60 cm and four squares with a side of 20 cm. We attach zippers to the opposite edges of the larger element.
At the next stage, we have to cut out four parts: these are 2 blanks 20 by 30 cm, 2 blanks 20 by 80 cm and a blank 80 by 78 cm. We need to fold 2 strips of the bottom and sew a lock along the fold line. Next, stitch all the products from the wrong side.
Finally, we come to the last, most important stage - assembling all four parts of the sofa. Think from the very beginning how all the furniture pieces will be connected to each other. There are two connection methods. The first is stitching the blanks inside out. The second, and simpler one, is to sew a double strip over the joint. This way, one of the chairs will be ready. To complete the manufacture of the sofa, you need to do a similar operation with the rest.

Rocking chair

Tools and materials: pine beams, boards, hacksaw, hammer, tape measure, drill, nails, concrete mortar.

First of all, we install side supports in pre-created holes (recommended depth is at least 1 m) and fill them with concrete solution.
We install horizontal crossbars and secure them with metal corners. This will make the structure stronger.
You should also install fixing plywood pads in the place where the beams meet.
We install a crossbar in the gap between the side posts. You need to secure it with large nails. We screw in very strong screws.
Attach chains to these screws.
The last step is to attach the rocking seat of the size you need.
If you strictly follow these instructions, your household will be able to enjoy swinging on this beautiful swing at least every day. home garden or at the dacha.

Sofa chest

Country life unthinkable without a veranda. In the mornings they have breakfast here, and during lunch they relax with a book in their hands. You always want to make this corner as cozy as possible. The following instructions tell you how to make a stylish and comfortable sofa chest for your summer house.

Materials: 2 sheets of plywood (1500 by 1500 by 15 mm), 2 pine timber(910 by 50 by 60 mm), pine panels, timber (3000 by 5 by 25 mm), lifting mechanism, rod 1150 mm, 2 liters of white paint, self-tapping screws, wood putty, 6 pieces of furniture supports, plugs for self-tapping screws (diameters - 12 mm, 17 pieces), 3 pieces of hinges, drawer handle.

Tools: drill, drills, router, screwdriver, roller, hacksaw or saw, tape measure, sandpaper, liquid nails, square.

First you need to make the parts of the sofa, guided by diagrams from the Internet or making them at your own discretion. Next, you should drill the holes in them necessary for the subsequent installation of a metal rod.

Next, we drill holes that will be needed in the future for attaching the backs and seats. We also drill holes for self-tapping screws.
Assembling the back of the sofa. We install a metal rod in the previously made holes.
The next step is to secure the bars for the bottom of the sofa. We attach the plywood bottom to the upside down furniture frame. We fasten the plywood wall with self-tapping screws.
Glue it on liquid nails plywood strips.
The next stage is assembly drawer, then the roller mechanism should be secured.

We connect the seat and back of the sofa using long self-tapping screws.
Next is the installation of the bottom of the box. We secure the structure with self-tapping screws. We fix the bar.
Mark and twist the loops to the installed bar.
The most important and most responsible step. You need to carefully sand the entire structure, paint it with the desired color and let it dry. After this, the sofa is completely assembled.

The last thing to do is to make a set of cushions and seats for the sofa. You will need patterns and diagrams, padding polyester, fabric of the desired style and color. By analogy with the previous instructions, you need to create a new set of pillows, as well as a mattress. Set it all up on the sofa.

Now you have a wonderful sofa-chest that fits perfectly into the interior of any cottage, very functional and comfortable.

Bench or bench

An unusual, but at the same time simple and easy to implement option for your patio.

To begin with, we make two three-section lattice panels. In the future they will serve as the back and seat of the sofa. Using slats, we connect the parts of the panels using wood glue and screws.
The main difference between this sofa and the others is that they do not have front support legs. Therefore, the seat should be secured using three console supports. We reinforce the supports with steel plates. Screws will also help, the length of which should be from 70 to 80 mm.

The next stage is the installation of seats and a shaped backrest. This will give the furniture a finished, solid look.
The next step is sanding the product. It is made with sanding paper. Next, the bench needs to be coated with a special varnish, which can be purchased at any hardware store. You can also use, for example, enamel.
And finally, we make our sofa comfortable and soft. To do this, use a foam mattress, dressed in a sewn cover made of any fabric.

Made from a bathtub

If suddenly the idea came to your mind to change old bath for a new one, don’t rush to throw it in the trash. As they say, everything new is well forgotten old. Same with the bathroom. Making a new sofa from an old unnecessary bathtub is a great design idea that will save money and make the interior of an apartment, cottage or private house even more original.

Required tools and materials: actually cast iron bath, sanding machine, primer, paint of any color of your choice, sanding paper, mattress.

Take the old one cast iron bath. It is necessary to remove the old legs and polish it.

Draw the contour lines of the future sofa. This should be treated with extreme caution. As they say, measure twice, cut once. Use a sander to trim.
Smooth the edges of the tub using the same machine.
Using a primer, you need to level the surface of the bathtub and its legs.
Paint the tub and legs the colors of your choice. The bath can also be made multi-colored, or left white - it all depends on your desire.

Sand the bathtub with sandpaper.
Place the pre-prepared mattress on the seat.

Luxurious, stylish, modern sofa ready!

Restoration

Sometimes it happens that old sofa no longer beautiful, comfortable and fresh looking as before. In this case, many people go to the store to buy new furniture, but this is always unprofitable. It would be easier and smarter to restore an old sofa. Then it may become even more interesting than before and transform the interior of the house. Below are some of the most basic ways to restore an old sofa, as well as detailed instructions for each of them.

How to replace springs/spring block?

Replacing and altering springs may be necessary when:

the sofa is already very useful long time and its spring block has weakened and brings visible discomfort when sitting;
the spring unit has been faulty since the date of purchase;
The level of spring stiffness is not suitable for owners from the very beginning and brings some inconvenience.

Tools: tape measure, wrench, screwdriver, pliers, sharp stationery knife, furniture stapler.

Instructions:

First you need to disassemble the sofa and separate the parts using a wrench. To remove the cover you will need pliers. Next, you need to pull out the mattress, carefully examine the springs, and find the problem. If necessary, you can replace some of the springs. To do longer term operation of the spring block, it is necessary to cover it with a foam mat.
If there are a lot of broken or damaged springs, you can purchase a new block of springs at any hardware store. Then the sofa will become even better and last even longer.

Replacing foam rubber

This is another way to restore an old sofa. We will need: new good quality foam rubber, any thick fabric, canvas fabric.

Brief instructions:

We remove the old foam along with the sofa brackets.
We make a pattern with an allowance of 7-8 cm.
For safety, a dense fabric is placed on the spring block, which is best further reinforced with threads. We put two layers of foam rubber on the seats.
We tighten it with canvas fabric.

Foam rubber is a very cheap material, so you can find it in good quality and at the same time affordable price won't be a problem. This is still better than buying a new sofa if its contents have become unusable. This modification method is very simple and easy to implement.

Changing the upholstery

It happens that the appearance of the sofa becomes completely unusable and ugly. He starts to look old, ugly. The culprit is usually the upholstery. This master class will help you replace the upholstery yourself without much effort.

Tools: wrench, screwdriver, pliers, side cutter, furniture stapler, sharp large scissors, soap soap, sewing machine and thread.

Instructions:

Disassemble the entire sofa. For convenience, put all small fasteners in a box: they can easily get lost during operation.
Remove the old fabric with great care. Don't tear it, strictly follow the seams. The slightest mistake can lead to a horribly unsatisfactory result.
Inspect the mechanism and all the components of your sofa.

Next, work begins with the upholstery material. Be sure to iron it using an iron, smoothing out all seams. Don’t forget to keep your sofa beautiful, every little piece of fabric is important!
The next stage is cutting out fabric parts for the sofa. We simply trace all the pieces of old upholstery onto the new fabric. Then cut along the contour. Using a machine, we sew the seams on each part.
The final step in replacement is stretching the finished upholstery onto the furniture. A specialized stapler will be an excellent assistant in this matter - it can easily sew up fabric. When everything is ready, all that remains is to assemble all the seats for the sofa and its cushions together.

How to change the height?

Sometimes the size that the manufacturer intended does not suit us for reasons of height or simple convenience. Sometimes you just want something new in the interior. And since the sofa is the most noticeable thing in any room, changes should primarily affect it. Next instructions will help increase the height of the sofa without much effort.

In order to raise the sofa above the floor, you will need metal stands. They can be made from aluminum or steel. First you need to drill holes in the legs of the sofa and connect them. Bolts and nuts will help here.

How to increase the length?

Sometimes it is also necessary to make a given piece of furniture longer. There is no universal method, but here are some very easy life hacks that can help:

You can place cardboard boxes in the place where the pillows should be.
You can remove one side of the sofa and place several ottomans nearby (choose the number as desired).

Original advice– place stacks of unnecessary books nearby. They need to be covered with a blanket and soft pillows placed on top.
The armrest of the sofa can be converted into a part that extends it. For this you will need foam rubber.

Decoration and decor

The sofas offered on the furniture market are not always distinguished by their special beauty, style and originality. If you can’t find the right one among the many boring models, there is a way that is a little more difficult than just buying, but very worthwhile - decorating the sofa. There are many ways to do this. It all depends on the imagination of its owner.

But if you're looking for the most practical, original ways to decorate and enhance your sofa, here are some tips:

Design of armrests. Many people ask the question: how to decorate standard, unremarkable armrests? It all depends on your imagination and originality.

You can paint them in bright, non-standard colors. Moreover, it is not necessary to make them the same: combinations of colors such as, for example, green and pale yellow will look very advantageous. Armrests painted in gold and silver colors will look luxurious.

You can cover the armrests with various stickers, or, for example, with shells brought from the sea - you just need to apply glue to them and attach them. This option is ideal for marine-style interiors.

If your armrests are made of fabric, here's a great and easy option: patchwork. They can be purchased at any fabric store. You need to remove the cover from the sofa, sew the desired applique in place of the armrests, and then put it on again.

Pockets for remote controls– a great option for any home, because almost all of us like to watch our favorite shows or movies in the evening. This is a very simple decoration. First you need to choose a fabric to match the sofa upholstery and cut out a pocket on it. With help sewing machine sew its two parts together. We attach it to the back or side of the sofa - a stylish addition to the furniture is ready.

In the same way, you can make various organizers for other things: magazines, books, various accessories, your favorite board game.

Carriage screed or capitonné will give any sofa an original, luxurious appearance. Such sofas are sold as separate models, but you can also make a carriage tie yourself using buttons on upholstery such as jacquard, chenille, flock, velor, leather.

Over time, your sofa's upholstery becomes dull, aged, and fades or deteriorates. Also, the fabric on the sofa becomes boring and begins to irritate the eye. If all this happens to your furniture, you can choose a wide variety capes and bedspreads. There are many of them offered in stores: from different fabrics, colors, styles, ranging from the simplest and most inconspicuous ones to genuine leather capes for luxurious interiors. The cape will perfectly complement the appearance of the room, making it more original and interesting.

Scrolling through the colorful illustrations of exquisite furniture for living rooms, you will undoubtedly stop your gaze at the photo of a small, simple sofa consisting of a wooden frame and a mattress. The practicality and convenience of such a sofa are captivating, but the price is stopping us. Perhaps an excellent alternative to such waste would be the manufacture simple sofa with your own hands.

DIY sofa: advantages

The basis of a simple sofa is a reliable frame made of several transverse and guide boards. Such a sofa is remarkable in that it can be made independently without any difficulties from the most simple materials accessible to everyone. All you need to make a sofa with your own hands is the development of a drawing - diagram, accurate calculation of the necessary materials, basic Building tools(square ruler, drill or screwdriver, hammer, jigsaw and furniture stapler), accuracy, patience and hard work.

For a modern apartment, a simple sofa made by yourself will look a little rough, and it has no such purpose. However for country house or dachas - this excellent option, which will cost you less effort and expense.

Several arguments can be made in favor of making a sofa with your own hands:

Significant savings Money. A simple sofa with your own hands will cost you several times less than one bought in a furniture store. However, do not forget the simple truth: savings should not come at the expense of quality!
When making a sofa, you control the quality yourself and are responsible for the finished furniture! You don’t have to worry about unscrupulous connection of beams, low-quality consumables, and shortcomings and defects in work.
By choosing high-quality wood and modern fittings, you can give the sofa a certain “professional” feeling. Choose wood without knots, dark areas and rot, ensure the accuracy of the assembly - it will help give the finished furniture a special shine to a homemade sofa.

Use original finishing and reliable, high-quality upholstery materials.

When making a sofa with your own hands, you develop the design project yourself, and the finished structure will be made in accordance with your needs and dimensions.
In the future, you can easily reupholster the sofa, again significantly reducing your financial expenses.
By assembling a sofa with your own hands, you will receive satisfaction from participating in creative process, conducting a master class and incomparable pride in the results of their work.

DIY sofa: master class

All parts of the frame of a simple sofa should be made and assembled in the following sequence:

back,
Front Panel,
seat,
armrests.

And finally, the base is mounted on the finished frame.

So, how to make a sofa with your own hands?

To begin with, you should prepare boards of suitable sizes.

After you have accurately taken all the measurements, you need to carefully saw off. Then marks are made on the parts and grooves are made in the designated areas and holes are drilled for the stopper on the base frame in order to screw the fastening screws into the lower horizontal beam of the frame without allowing the stopper to crack.

Attention: when preparing parts and blanks, you should pay attention to the “pattern” of the tree. The connections must be made in such a way that the annual rings of wood with their convex sides face each other.

After completing the assembly, all surfaces of the boards must be thoroughly sanded. The final work of this stage will be surface treatment with colored glaze, special furniture wax or stain with further matting.

Of course, the dimensions of a simple sofa are set individually. However, it should be taken into account that the parameters of the sofa base will determine the dimensions of the finished structure.

When making a sofa with your own hands, you can make the backrest at an angle. The skeleton can consist, for example, of 2 horizontal and 4 vertical boards. The height of the backrest is adjustable depending on your height and personal preferences. The plywood is applied completely to the back of the skeleton, and from the side on which the back of the person sitting will rest, only on open area. Bottom part will be covered by the seat.

Soft seats for a simple homemade sofa

The base material for creating the seat is foam rubber with a density of at least 35 kg/m3, which can be laid in two layers. The base is covered with a protective non-woven fabric, which minimizes possible friction between the decorative covering and the base of the sofa, and also prevents it from sticking to the base, wrinkling and sliding.

The manufacturing technology of the backrest is similar with only one difference - the quality consumables You can use foam rubber of a smaller thickness, since the level of load on the back is much less than the load on the base of the sofa. It is recommended to use a strong edging cord to sew the decorative covering together. Zippers or Velcro strips can be placed along the rear bottom edges.

It should be noted that some home craftsmen are successful in making furniture, but upholstery work can be challenging. In this case, specialized organizations will come to the rescue; you just need to indicate the dimensions and provide them with consumables.

The top layer of soft seats is fastened with Velcro, which ensures a strong connection under normal load and shear.

The sofa is ready!

DIY sofa: video on youtube

How to make a sofa with your own hands video