It remains to analyze in detail what tool is needed for this.
Grout mixing tools.
The easiest option is to knead the grout in the buckets in which it is sold grout mixture with hydrophobic properties. Sold in paper bags.
You can stir by hand, with a trowel. The shoulder blade should be long and rectangular. With this shape of the tool, it is easier to stir and get it from the bottom. A narrow metal spatula is less productive.
Stirring the grout by hand, with a trowel.
Often the videos show stirring the grout with a drill or screwdriver.
Possibly at low rpm. But it's another one additional tool. Which needs to be washed, stored, bought, transported. The time gain is small. Except in the case of grouting tiles on the floor in the supermarket.
At this stage, another important tool is needed - a brush for washing the trowel and bucket.
If you leave it without flushing (there are many such advisers) and just, then, knock to sprinkle it, then everything will not fly off. AT new grout(and a different color) pieces of old dry grout from a bucket will come across.
Cleaning grout tools with a brush and water.
Tool for applying grout between seams.
Spatulas for grouting were considered separately. The best was for grouting epoxy grout Litokol. It mixes well. It is convenient for them to work in corners, thanks to sharp edges. This is the opinion of the majority who have tried it in work. Those who did not do this are still rubbed with a narrow piece of rubber.
Tool for applying grout into the seams.
Tools for eroding grout and cleaning tiles.
For this stage of work, you need to have two tools:
Spatula for cleaning grout from tiles and a piece of soft foam rubber. The beauty of the seam depends on these tools.
The professional spatula is made of high quality plastic and porous cellulose. Another such tool may be called a “rubber-coated plaster grater”.
There are many analogues. You can't call them otherwise. The problem of the designers of such devices is that they do not overwrite the tile and do not understand the main property of this tool. Outwardly copying, they want the product to be a success.
Spatula for removing grout from tiles.
The main difference between such spatulas ( in photo 1-3 ) - soft foam at the base. Often with small pores. It does not collect the cooled grout well and quickly clogs with the mixture.
Also, the foam is quickly erased, but often it doesn’t come to that, because it falls off the handle. If you buy such a tool, then the whole technology is perceived as nonsense.
With a piece of foam rubber - not everything is simple either. If you take the first one that comes across, then it will last for 2-3 working days. It quickly crumbles and turns into a rag. To blur the grout on the tile, with such foam rubber, you have to press harder. This causes cavities in the seam.
I felt the difference by accident, having bought a piece of pink foam rubber at the market. It is more expensive.
Pink furniture foam.
The whole trick is in the density and rigidity of this material.
Foam rubber is made for various needs. The cheapest is packaging or soundproofing. This is the one most often used for blurring. It quickly clumps into a ball and does not absorb water.
Furniture foam must be used Pink colour. It has more density and rigidity. It does not wrinkle after repeated squeezing. Such material lasts a year, without loss of quality.
Thickness also varies. From 20mm to 100mm.
Optimal - 40 mm. With a greater thickness, it is necessary to rinse more often and more thoroughly. The grout stays in the middle of the thick piece and hardens. With a smaller thickness - poorly collects water.
Pink foam rubber 40 mm thick.
Is in furniture production denser foam - of blue color. There was no such experience.
Below is information about the classification of foam rubber for furniture. There detailed explanation why the packaging material loses elasticity:
If pick up the right tools and use them correctly, there is no need for a round spatula to form a seam. The latter has a drawback - smearing grains of paint along the seam (for some grouts).
Tools for cleaning tiles from plaque.
it final stage in trowel work Oh. On it must be removed from the lined surface white coating, which appears after the cement grout dries.
You can use a simple dry cloth. It will work. But if I imagine the evolution of this tool with me, then there will be such a chain.
Work gloves > burlap > piece of towel > felt mitt.
The last option turned out to be the most effective. Such gloves are used in welding work. Sometimes they are given the name "welder's gloves". The pile removes plaque well and will never scratch the tile. One glove lasts a long time.
You can also use a more rigid version. Scotch Bright sanding sheets for hand sanding. This material has many options for implementation. It is necessary to use products that do not contain abrasive material.
They are good for removing hardened grout in pits and a deep pattern on the tile.
Felt gloves.
It is necessary to carry out cleaning from plaque after the seam has completely dried.
Dry tiles after grouting.
In this condition, as in the photo, it is too early to wipe the plaque. Seams are raw. By removing plaque, you smear the grout over the tile again. Can you wash again? clean water with foam. The next day, there will be less plaque and it will be easier to remove it. The more dilutions of cement grout with water, the weaker it is.
Epoxy grout tools.
To apply epoxy grout, you can use all of the above tools.
Only, in this case, some become disposable. The pores on the spatula for washing and foam rubber are clogged with drying epoxy mixture. They lose their performance. With significant volumes, one set is not enough, you have to change.
Tiler's bucket - is it necessary for grouting?
Tiler bucket.
This tool has recently appeared on the Russian Internet market. In Western YouTube, he was seen five years ago.
The main advantage of a bucket for grouting tiles (his know-how) is rollers for cleaning porous material on a grater from grout.
This innovation allows you not to wet your hands and work without rubber gloves. Prevents cement from corroding the skin. There is nothing more useful in that set. There are disadvantages:
- The first drawback is the grater that comes in the kit. It has a soft foam cover. This is one of the first three options in the photo above.
- The second inconvenience is the bucket itself. As a container, it is comfortable and roomy. But this is another container that needs to be moved, stored, bought. The most balanced review of the grout bucket is here:
It is not in vain that there are attempts to combine the idea of cleaning with rollers with existing containers for working with tiles:
- Use a small bath for cleaning.
- Adapt a simple roller for rolling wallpaper.
A device for squeezing a grater.
Roller for cleaning rubber grater.
Tools for grouting large areas.
A set of such a tool in the video below:
It uses a mixture somewhat thinner than usual. Due to this and repeated, repeated movements on the tile, the filling of the joints is achieved. Still there, the grout is “soft” - it hardens for a long time and is easily washed off with a foam rubber sponge.
Second interesting experience– use of a “butterfly” mop, with a mechanical spin when grouting large areas of tiles, on the floor. Its advantage is that the foam nozzle is covered with fleecy microfiber, which makes the mop absorb water, but with a hard surface. The flat surface does not wash out the grout in the joints. With such a mop, even quickly hardening mixtures can be washed.
TOOLS FOR REMOVING OLD GROUT.
Sometimes the grout does not match the color or is not applied professionally. In such cases, there is a desire to change it. The method of removing old grout from the joints depends on the type of grout applied.
If the grout is of class “CG2”, with increased resistance to abrasion, then it can only be removed mechanically:
Grinder or DREMEL mini drill. The latter is more convenient.
Tools for removing old grout.
When working with a grinder, it is necessary to pass the cutting wheel along the center of the seam, without touching the side edges of the tiles. Remains at the edges, then easily removed with a knife, with replaceable blades.
Grouts Ceresit, Sopro, - soft. They can be cut with a knife or a special scraper.
If the knife can only scratch the seam, then this is most likely Mapei's grout or similar in class. Scraper disadvantage:
- There is a danger of making a chip on the tile.
- On hard grout, it is not enough for a long time, and in some cases it is useless.
Knife Disadvantages:
- On not exactly laid tiles, corners may be chipped.
- In some cases, it is useless to apply.
Below is a collection of videos (playlist) “How to remove old grout”:
Grouting or, as professionals call this process, jointing is possible without a special tool. In very small areas, you can get by with your fingers or a piece of wiring. However, if you value your time, nerves and you are completely reluctant to get your hands dirty, we advise you to purchase a special jointing spatula.
What are spatulas?
There are a lot of options for rubber spatulas - some are produced by companies involved in the development building tools, some come with grout. Take the first one that comes across, if only the rubber one is not the best best strategy because, having saved on the purchase of a quality tool, you will lose on a lot of time.
Let's start the review with the most popular type of rubber spatulas - a tool with a trapezoidal rubber working plane and a comfortable plastic handle. The width of such a spatula is usually small, in the range of 50 - 150 mm. Produce them all and sundry, so you run the risk of running into not quality tool. The rubber part should be moderately elastic and resilient, but not soft. It is convenient to work with such a spatula in any position and even in very cramped circumstances, for example, when you need to get your hand under furniture.
However, due to the small work surface in open space, it loses out to wider options. However, such a tool should be in the arsenal of any tiler, and it will be quite enough for.
Productive but not very handy spatula for grouting joints in the form of a rectangle, top part which is made of plastic or wood, and the lower one is made of dense rubber. Due to the small height of the rubber part, it turns out to be quite rigid, despite the large width. though experienced craftsmen rarely acquire such an instrument - firstly, hands get dirty, and secondly, for a long time holding it is uncomfortable, fingers get tired. The width of the spatula is quite small - about 50 mm.
More convenient option rectangular spatula - wide trapezoidal. It is convenient to hold it both with one hand and with two, and due to the wide working part, it very quickly copes with large volumes of work. Such a tool will especially help out when it is necessary to seal the seams in the mosaic. Be sure to purchase a corner spatula - as the name implies, it is designed for sealing seams in the corners. However, it is also often used for sealing joints between decorative stone tiles, in figured mosaics. It does not have high performance, but it is very maneuverable!
A round spatula for forming seams looks like an ordinary piece of electrical wiring, and in fact it can really be replaced with an ordinary wire. It serves for the same deepening of the seams around the entire perimeter of the installation, but you probably already guessed that the effectiveness of such a device is extremely low. By the way, such a tool is sold as a bonus only when paired with a grout.
Professional tools - from grater to seam tamping
You will hardly see these tools in the home workshop - they belong in the hands of professional tilers who do this every day and in large volumes. Let's start with a grouting spatula-grater - its design is exactly like that of a grater, but it performs the functions of a spatula, thanks to a rubber or rubber working surface.
There are a lot of variations of the spatula-grater - with a monolithic "sole", with a removable one, hard, soft. It is better to purchase such tools from well-known, trusted manufacturers, for example, Litokol or Raimondi. In these cases, you will be sure that the money spent will pay off with a very long service life - a quality tool can last up to 10 years! The width of the instruments ranges from 9 to 12 cm, the average length is 25 cm.
There are also special spatulas-distributors - outwardly they look like an ordinary mop, with the only difference being that they do not wash the floor, but “dirty”, because the process of initial distribution of the grout mixture along the seams with its help leaves a lot of stains and streaks. However, they cannot be avoided in any case, and sometimes it is much faster to use this tool and clean everything up than to mess around with each seam separately. The dimensions of this "mop" are quite impressive - the length of the working part can reach 60 cm.
The grouting gun is an indispensable tool for sealing joints between decorative stone tiles, terracotta tiles and others. uneven surfaces. In some ways, this tool resembles a confectionery syringe. It really can be replaced, if not by the confectionery syringe itself, then by a strong bag with a cut corner. You can work with such a tool only if the grout has a sufficiently liquid consistency.
When buying a pistol, it is worth buying an expensive and quality option than to spend money on a cheap product that may not be airtight. Another interesting and useful tool in the arsenal of the master - a rammer and a seam leveler. Outwardly, it looks like a long cane with a replaceable metal tip that resembles a ball from a bearing. Its use is especially effective when laying tiles with wide joints, from 3 to 10 mm.
Well, what really distinguishes the master from the amateur is the presence of special sponges and buckets with squeezing rollers for quick and accurate cleaning of the tile surface from dirt. The grout contains sand and other abrasive particles as a filler that can scratch the tile. The use of high-quality foam and cellulose sponges reduces the number of scratches.
How to use the tools - the secrets of the process
By itself, the presence of all the above tools will not make you a master. It takes skill, and it can only be acquired through practice. However, it is much easier to master all the skills in practice, having also a theoretical background, and we will help you with this. Let's start by mixing the dry grout. This process is usually described in detail on the packaging of the grout, we will only suggest that the best containers for this process, plastic troughs, wide and shallow, will serve - earlier photographs were developed in such. The bottom of the trough must be completely flat, so painting cuvettes will not work for you.
And today, tilers use halves of rubber as a container for grouting. baby ball- although such a container is not very convenient for kneading, it is very easy to clean it from the dried residues of the mixture. To knead the grout, metal spatulas of a convenient width are usually used - these tools should only be made of stainless steel, otherwise real rust may appear on the seams over time. Mixes should be small so that you have time to use up the mixture before it hardens. The consistency of the grout is like that of a mortar for laying bricks.
Before applying the grout, the seams should be cleaned of dust and dirt. Do not try to immediately process the entire surface - work with a floor area of \u200b\u200bno more than 1 square meter at a time. If you try to wipe all the seams at once, then it will not be so easy to align the seams and clean the surface of the hardened mixture. Moreover, working for small area, you do not have to move on an uncleaned surface.
The tile should be slightly moistened - just wipe it with a damp sponge. Thanks to this, the spatula glides better over the surface and scratches it less, and the solution is easier to smear. rubber spatula it should also be moistened, it works much easier this way - most often beginners make this very mistake when working with a dry tool. The spatula should be held at an angle of about 40° - this ensures optimal force. The grout should be pressed into the seams - so they will be completely filled. Voids and depressions are unacceptable, especially in the case of tiles laid outside.
tile cleaning is described in a separate article - we recommend that you read it!
The grout gun is the most handy tool, with which to fill the gaps between the trim elements. It is suitable for working with any materials: natural or artificial stone, paving and tile, brick, concrete.
For filling seams ceramic tiles use a special pistol. This grouting tool helps make the job easier and faster. There are 2 types of pistols:
- for grouting stone joints;
- for grouting tiles, ceramic (clinker) tiles.
All tools of this type are plunger, equipped with a special simple mechanism for squeezing the mixture. different models differ in several ways:
- material for the manufacture of parts;
- color solution structural elements;
- the volume of the container for the mixture;
- the number and type of nozzles included in the package.
Any gun for grouting clinker tiles and stone consists of several elements:
- a housing in which a container for the mixture is installed;
- one or more nozzles;
- plunger mechanism with a piston;
- handles.
The plunger mechanism consists of:
- metal pusher;
- seal in the form of a solid rubber ring;
- piston
- springs.
Professional and semi-professional equipment is equipped with a mechanism that provides enhanced feed with a slight pressure on the handles. Large models have a welded metal body that can withstand enough high pressure. All elements of such structures are galvanized, which prevents the development of corrosion. it important point, since the gun, while working with it, is in contact with wet environments.
Nozzles, spouts of tubes and the tubes for the mixture themselves are made of high-strength plastic. It is a wear-resistant material that can withstand prolonged exposure to abrasive grouts. The most popular models are STAYER and POINTING GUN.
Seam filling guns are easy to use. In order to get started, you need to consistently perform a series of simple steps.
- fill the tube with grout;
- install the tube in the body;
- put on a spout if necessary.
After that, the handles of the tool are slowly squeezed, which sets the piston in motion. It is located inside the tube, in its upper part. When the handles approach each other, the spring straightens, which begins to put pressure on the piston, and it gradually goes down. In this case, the mass inside the tube is squeezed out through the spout. This is all you need to know about how a stone and tile grout gun works.
Putty knife
A spatula for grouting is a highly specialized product, represented by several types of this tool. Masters know how important its form is, on which labor productivity largely depends. No less important is the size of this tool for finishing and plastering works.
The most popular among professionals and beginners is a rubber spatula for grouting gaps between trim elements. These tools are made of durable and sufficiently elastic material. Stores sell kits consisting of two, three or more spatulas. different sizes. The color can be anything, but the most common are white, gray and black. The shape is rectangular or trapezoidal.
For a beginner who does not have a skill in finishing work, it is advisable to buy a set of spatulas. In this case, you can try each one in practice and choose the one that is most convenient and provides high labor productivity. The length of the rubber sheet can be from 5 to 50 cm. Such spatulas are suitable for working with any kind of mixtures. But for applying cement grout, the use of a metal spatula is often required.
A round spatula is necessary to form a beautiful line of seams. Outwardly, this tool resembles a piece of elastic and at the same time elastic wire.
Other types of tools
In order to make high-quality grouting, you will need not only a spatula. There is a set of tools and devices, each of which is designed to perform any one task. So, to apply the mixture using the slurry method, you will need a grout grater, on the underside of which there is dense rubber.
It is not difficult to work with this tool: a small amount of the mixture is collected on the canvas and distributed over tiles. Moving the grater diagonally up and down, fill the joints with grout. Collect the next portion of the mixture and repeat the process. This is done until tight seams are obtained.
To give them evenness and smoothness, you will need a special trowel for grouting. An integral accessory for a tiler is a soft foam rubber sponge. It is used to wash off excess mixture and eliminate uneven seams.
Over time, the mixture between the tiles begins to darken, and fungus or mold may appear. This is due to the insufficiently high moisture resistance of the composition used to fill the gaps. In this case, a grout pencil, which is otherwise called a "grout marker", will help out. And outwardly, the tool corresponds to the name: it has a spout, a removable cap and a hollow body, inside of which there is a white or colored antiseptic composition. The tile marker paints the seams in the desired color, masks stains, and disinfects.
Tile cleaners
The appearance of a tiled wall largely depends on how beautiful the seams are. There is a special grid for grouting, with the help of which the surface of the mixture in the slots is sanded. A trowel is also suitable for this purpose.
2 methods of grinding seams have been developed: dry and wet. For the first choose a grater with fine mesh. The seams are not wetted with water, which leads to the formation of a large number dust. For this reason, many craftsmen prefer to use wet way grinding.
Before starting work, you need to buy a cellulose sponge, which is necessary to remove the grout from the tile. The process of using this device is simple: the sponge is immersed in a container of water, slightly squeezed and the mixture is cleaned from the tile.
How to choose a tool for the job
The choice of tool depends on what material you have to work with. A rubber spatula can be used to fill gaps between tiles and stones. If you have to finish the wall from artificial brick, the best choice there will be a gun. Grind the seams with the help of trowels. For grouting concrete, graters with nets are used.
Finishing step when laying ceramic tiles or artificial stone is grouting seams with a spatula, which gives the surface a finished aesthetic appearance and also protects the joints between separate elements from the ingress of moisture, the development of harmful microorganisms. 
Modern grouts differ in color design, thanks to which they can be selected in such a way that they fit the external design of the rest of the surface. Spatula for grouting joints between tiles, will become the right choice, usage this instrument allows for better filling of seams. If you are wondering what tools are used to lay tiles on the floor, then this one will help you.
Why these tools should be chosen correctly?
A grouting spatula is a specialized device, the configuration of which is designed in such a way that this operation can be done quickly and efficiently. Its main difference from the painting counterpart is its large length, so working with it is easier and faster. It comes with plastic or wooden handle, due to which it has a relatively small weight, which also makes it possible to significantly simplify the work. 
Another difference is that its canvas is quite thin, and it has a rounded shape at the end, so with it you can quickly give the seam a curly shape without using additional devices for this. Usually, the canvas is made of rubber, but sometimes other materials are used.
Best Spatula Configurations
A tool with this configuration is convenient and practical for grouting joints between tiles. It is convenient for them to knead the grout, and at the same time, due to the flexibility, the product does not damage the container in which the kneading is carried out. For this reason, the possibility of foreign objects entering it is minimized. soft rubber allows you to fill the joints tightly with grout, and ensures that no air voids remain inside the composition, leading to a decrease in the quality and strength of the joints, and as a result, a reduction in the life of the tile.
The most popular types of these tools are:
- toothed;
- rubber.
notched trowelis an auxiliary tool for working with ceramic tiles, decorative stone and others facing materials. Its main purpose is to optimally evenly align the adhesive on the surface of the floor or wall. It is more advantageous in comparison with the even varieties of these tools, since the layer geometry is even. Thanks to him, you will be able to avoid such problems in the future as: the formation of voids between the tiles and areas with an exorbitant amount of glue, which will be the result of poor quality work.
Notched trowel device.
At its edges are cells with a square section. For this reason, the distance between the teeth is always known, it is equal to the height and width of the teeth. It also has a comfortable streamlined handle, so it is easy and pleasant to hold in your hands, thereby facilitating the workflow.
Serrated tools are classified by tooth length and are marketed in a wide range. Buying spatulas with teeth of four to five millimeters will not be very justified, since glue is more than six millimeters thick on almost any wall. To align completely curved walls, tools with a tooth length of 12 millimeters are used.
Spatula rubber.
This tool can be of three types: soft, painting and trowel.
Soft rubber spatula.
The material of manufacture of this tool is technical rubber, so it is characterized by increased flexibility. Work takes place from the side of the chamfer. The tool has a comfortable handle, it is sold sharpened.
The scope of its application is wide, it is Finishing work– smoothing wallpaper, sealing joints between tiles.
Why is a rubber spatula better than competitors?
Using this tool you can create a smooth arched surface, it is suitable for grouting stone tiles, after all, deforming, does not spoil the material at all.
What is a paint spatula?
As a rule, it has a black color, because the material for its manufacture is a canvas of this color. Its main advantage is that it bends perfectly, so it can adapt to any type of surface. Usually it is sold even without a handle, but simply as a piece of rubber of a rectangular or trapezoidal shape.
Dear readers of the site.! Our site already contains a sufficient amount of materials related to tile works. tiling, various tips when working with him, and so on.
In this article we will show how ceramic tiles are grouted, we will give detailed instructions with a photo, after reading which you can easily complete this work with your own hands.
So, all the tiles are already laid by your with my own hands and it remains to wipe the seams for a full gloss. What do we need to work?
Materials and tools for grouting tile joints
Well, first of all, you need to purchase a grout.
The calculation of the required amount can be made using the calculator for calculating the amount of grout mixture or recommendations on the packages. In the "online calculator" you need to enter the format of the tile, the width of the seam, the area of the surface to be laid and you get required amount fugue in kilograms. This is what you will follow when buying. For tips on choosing a grout mixture, read the article “How to choose a grout for inter tile joints? Link to article.
Tools for high-quality grouting of tile joints will need a little:
- container for diluting the grout mixture;
- electric or cordless drill with a light mixer;
- rubber spatula and foam sponge or viscose cloth.
By the way, it will not be superfluous, and a small hand sprayer for water or, as it is also called, a sprayer.
We close the grout mixture
Most often it happens that, for example, in bathrooms, the grout mixture on the walls is different from that used for the floor. It is best to start working with seams from the walls. For now, the floor can be covered with cardboard or something else, so as not to stain and subsequently waste time and effort on cleaning it.
Now you can take the container that we prepared for diluting the grout and pour the required amount of water on the bottom in accordance with the instructions on the package.
Pour water first, then pour the grout.
There is no need to do the opposite, otherwise unmixed lumps will remain at the bottom, and it will be difficult to get rid of them.
Now you can mix everything thoroughly using a drill with a light mixer. You do not need to take a mixer for this purpose, which is used for plasters or mortars. The one that usually stirs the paint when tinting is suitable. Just like you see in the photo. This is so because the volume of the diluted mixture is not large, and a massive mixer will simply scatter everything around from your container. And it’s not worth breeding more than two kilograms, because you simply won’t have time to work out the finished product. It will seize before you use it up, and it will be impossible to work with it. So, after mixing everything thoroughly, you will get a wonderful elastic solution that looks like thick sour cream.
A small preparatory stage
This stage includes wetting the joints of ceramic tiles. This is where you need a water spray bottle. Using it, you can very quickly spray the entire area that we will overwrite.
This is done so that the laid grout has better adhesion with seams. Also, this moisture will enable the mixture to have a longer pot life. By the way, if you have not found a sprayer, then you can perform this operation using a container of water and a regular paint brush appropriate size. She can also moisten the seams. But this process is longer and less efficient. The sprayer is much faster and more productive.
Do-it-yourself tile grouting
After doing preparatory work grouting tile joints is carried out using a rubber spatula. It is it that can be used to hammer the mixture into the seams. We do this very carefully and quickly. At the same time, we try to fill the grout into the inter-tile space as tightly as possible.
This is an important point, because if voids occur in the corners and edges of the tiles during laying due to a lack of glue (and this can sometimes happen even for experienced tilers!), Then the grout mixture will fill them and this drawback will be eliminated.
Excess grout on the plane of the tile is also carefully collected with a spatula.
If this is not done, then the material consumption will increase, and subsequently you will be tormented to wash the surface.
Let's not forget to fill up those places where there are holes for the output of communications.
Sometimes such holes are subsequently closed with caps from faucets and other plumbing fixtures.
In this case, their grout, in general, would not be required. But often these conclusions remain open. In this case, the omission to wipe the gaps between them and the tiles will spoil all our work.
The final touch in grouting ceramic tiles.
After you've used up all your ready-made grout and hammered all the existing seams with it, you ended up with something like this.
Now the main thing will be to clean the tile from the remnants of the mortar and smooth out the existing irregularities at the seams (they will be one way or another!).
For this purpose, you can use a foam sponge or viscose cloth. Carefully wipe off excess grout from the surface of the tile with this tool.
The existing irregularities tile joints can be smoothed with the same things, but after dipping them in water. After such a wet treatment, the irregularities simply blur, and the seam becomes even and smooth.
Unless, of course, you wash them not the next day, but immediately after you have finished hammering the grout between the tiles.
And when you have completed the work with the walls, the grouting of ceramic tiles laid on the floor is done in the same way. Everything is the same, only the surface is no longer vertical, but horizontal.
Well, now the view is finished!
Loading...