Do-it-yourself slime at home recipe. How to make a slime at home: the easiest and safest ways. You only need two ingredients

Caring mothers are often concerned about the question of how to make a Lizun toy, which would contain only useful components, and not sodium tetraborate or glue, as in the store version. Fortunately, there are many recipes for creating fun at home with a variety of ingredients. Made with love, by performance characteristics a homemade toy is by no means worse than a purchased one, and the mother can be sure that Lizun will not harm the baby.

Kids just love to play Slime - this toy, useful for fine motor skills, is easy to make at home.

What is "Lizun"?

The original name of Slime is Slime. The toy was created by Mattel in 1976. Modern name fun acquired in the 90s. last century after the appearance of the cartoon "Ghostbusters". One of his characters, the Ghost Slimer, was very reminiscent of Slime: he was green and easily penetrated walls, leaving a greenish sticky slime on the surface.

Just like slime - a soft jelly-like substance that easily changes shape, but does not melt in the hands. It can become hard and elastic with a sharp or strong impact, stick to the ceiling or run down the wall, leaving an unsightly mark. If desired, the toy can be given any shape, and at the end of the fun it can be easily placed in a jar and proper storage does not lose its properties for a long time.

Psychologists consider the Lizun toy to be a wonderful anti-stress. It helps to relax the baby, occupy his imagination, grow up with a well-developed imagination. Moreover, Slime develops motor skills and motor activity well, strengthening nervous system, attention, vision, memory.

How to cook "Lizuna" at home?

There are quite a few easy recipes that describe how to make Slime. When choosing a method, first of all, you need to pay attention to whether the product will be safe for the baby if he decides to taste the toy.

It often happens that a toy at home does not turn out the way it was intended, even with the exact observance of the proportions and execution technique. The reason for this is the quality of the products that were used to make the homemade Slime. In this case, you need to gradually select the correct proportions.

After manufacturing, the toy is removed from the dishes in one mass. If it is heterogeneous, Lizun needs to be kneaded with his hands for several minutes. If the slime is too sticky, it needs to be thinned by increasing the water content. If the mass does not stick to the hands at all and slips off, it should be slightly dehydrated by pouring flour, borax or glue into the mass and mixing well again.

From shampoo, shower gel or liquid soap

You can quickly create Lizun yourself by combining shower gel (can be replaced with liquid soap) with shampoo in equal amounts. Then place in the refrigerator for a while (optimally - overnight), after which it remains just to wait until the mass thickens. To make the toy transparent, preference should be given to chemistry without granules! Slime made from shower gel is stored in the refrigerator in a closed jar. Such a toy "lives" for about a month.

From shampoo, starch and water

Without much effort, you can create a Slime from starch (200 g), shampoo and water (100 ml each). Combine the ingredients, mix thoroughly and leave in the refrigerator for twelve hours, after which the toy is ready. When the game is over, put the slime in a closed jar and put it back in the fridge. Expiration date - a month.

From baking soda

You can just cook Lizun for a child from baking soda And detergent for dishes. There are no exact proportions, since preparations of different brands have their own consistency. To create a toy, you need to pour a little water into the detergent to dilute it. Then put a little soda and knead, as shown in the photo. If the consistency is too thick, dilute with water.

There is another way to make a soda slime, which involves the use of stationery PVA. For this purpose, you need to mix warm water with glue (50 ml each) to a homogeneous composition. Then pour in the paint and mix well again. After that, dissolve 50 g of soda in 1 tbsp. l. water and begin to slowly pour into the mass. Let it freeze. The product will last about 3-4 days.

From flour

Absolutely safe fun for children is made from flour. To this end, 2 Art. flour must be sifted through a sieve, pour first cold water and then hot, but not boiling water (50 ml each).

Thoroughly mix all the ingredients until a homogeneous consistency. Get a few drops food coloring, optionally for taste - sugar or salt.

You need to stir until the dough becomes a uniform color. Leave in the refrigerator for three hours, take out, knead with your hands.

From PVA glue and sodium tetraborate

If you want to create a toy at home that is as close as possible to the store, you need to take:

Paint (any food coloring).
PVA - 60 g.
Borax or sodium tetraborate (Bura) - sold in a pharmacy. If a solution is taken, one jar is enough. If powder, then 1 tbsp. l. must be dissolved in 0.5 tbsp. liquids.
Water - ¼ tbsp.

The water must be slightly warmed up and begin to gradually pour in the PVA (than more glue, the more springy Lizun will be). Mix water with glue until smooth, add food coloring. If you purchased Borax in powder, then it must be diluted with water (15 g per 30 ml) until smooth - without lumps.

Next, you need to mix all the components together. If the masses are very sticky to the hands, you need to add more Borax. Pour the resulting mass into a bag and start kneading with your hands. After some time, the toy will be ready.

From liquid starch and PVA

Borax can be replaced with liquid starch (sold in hardware stores):

Pour 100 g of the product into a bowl, pour in 200 g of glue (the amount depends on the consistency you need to get);
to give color, you can drop a little dye;
stir until you get a homogeneous mass, the desired consistency;
leave in the refrigerator for 1-2 hours.

Sparkling Slimer

To make Glitter Slime, you will need:

glitter glue (100 ml);
1 glass of water;
1 tsp Boers;
1 st. l. water.

Mix borax in a glass of water. Pour a package of glitter stationery glue into another container.

Add a tablespoon of water (15 ml) to the glue, mix well - this will make the mass more flexible and pliable. Next - add Borax solution to the mixture, knead Lizun to the desired consistency.

Magnetic Slime

In order for the Slime to glow and be attracted to the magnet, you will need:

sodium tetraborate powder (borax);
water;
PVA - 30 g;
iron oxide;
neodymium magnets;
paint with phosphorus (optional).

The cooking process is simple:

stir 0.5 tsp. sodium tetraborate in a glass of water;
in another bowl, prepare a mixture of PVA and 0.5 tbsp. water, after which you can pour in paint with phosphorus;
two mixtures very slowly and carefully combine with each other until a homogeneous mass appears.

We make a “pancake” from the finished Lizun, sprinkle iron oxide on top and knead well until a uniform color and condition.

To create a slime from Borax without glue, you need to stock up on water, paint, polyvinyl alcohol in the form of a powdered substance. Medical alcohol or vodka is not suitable here:

Dilute polyvinyl alcohol with water and cook over low heat for 45 minutes, stirring constantly so as not to burn. Then turn off the gas and leave to cool.
Dissolve 2 tbsp. l. Borax in a glass of water, then strain and carefully pour into alcohol, observing the proportions 1:3.
Mix and pour in the dye. The toy is ready.

From toothpaste

Often the question arises of how to make slime from toothpaste. To this end, it is necessary to squeeze 20 ml of toothpaste into the dishes, pour the same amount of liquid soap, knock down a homogeneous mass, where gradually add 5 tsp. flour. First, knead the mass of toothpaste with a spoon, then with your fingers. At the end of the work, you should slightly wet the Slime with water and wrinkle it with your fingers.

Toothpaste slime is very affordable, because every home has an “ingredient” for a toy.

From plasticine, gelatin and water

Often the question arises of how to make Lizun from plasticine. The method involves the use of:

gelatin - 50 g;
plasticine - 100 g;
water.

Pour gelatin with 200 ml of cold water, leave for an hour, then put on water bath. After boiling, immediately turn off the gas. Soften plasticine with your hands and mix with 50 ml of warm water. Pour the swollen gelatin into the plasticine substance and mix until a viscous elastic mixture is obtained. Place the mass in the refrigerator and wait until it hardens.

The color of the toy can be made absolutely any, here it is important to know the color preferences of the baby

From shaving foam

You can make your own slime using shaving foam. In this case, the toy will be soft and airy. Shaving foam, glue, acrylic paint, boric acid, liquid soap are useful here.

To prepare the toy, you need to pour 125 mg of thick high-quality glue into the dishes, add green pigment and knead until a thick dark mass is obtained. To make it lighter, you can release shaving foam into the mass (without sparing). After mixing, the mass will acquire the consistency of a sweet cream.

The next step is the preparation of the thickener. To this end, it is necessary to pour 15 g of boric acid, a little water, a couple of drops of detergent into a separate container. Stir, add to the colored mass prepared from the glue and stir.

From hand cream

You can make a plastic toy yourself from hand cream and perfume. This recipe is unusual and may not work, but if you want, you can try.

It is necessary to squeeze a thick cream into a jar, add dye and mix. Then add a couple of drops of perfume and continue to stir. When the mass thickens, knead with your hands.

Lizun has a specific consistency, so it is necessary to properly care for and store it. So that the plastic toy does not dry out, it should be stored in a jar with a well-closing lid. For the same reason, caring for jelly-like products involves hiding them from sunlight and heating appliances.

It must be borne in mind that the slime should not come into contact with the pile. If the villi stick to the Slime, it will lose structure and smoothness.

Slime, slime, fluffy or handgum - bright stretchy jelly toys have long gained popularity among kids and teenagers. It is not only interesting to play with them, children are attracted by the opportunity to create such a hand-made “chewing gum” on their own. different ways how to make a slime, you can find a huge amount on the Internet. The most original and interesting - in our article.

For the preparation of slimes are used different ingredients. The main components are glue and an activator - a substance with which the liquid substance does not spread and does not stick to the hands. Among the additional ones there is a huge number of options, from which bright and dissimilar handgams are obtained.

Most often, sodium tetraborate is used as an activator (a chemical compound is the sodium salt of boric acid), it is also called borax. In recipes, borax can be replaced with lens fluid or borax, a mixture of tetraborate and glycerin.

For the classic version of the slime you will need:

a few drops of borax;
25 grams of glue, preferably silicate;
300 ml of water;
1 or 2 dyes (choose safe ones);
sequins (optional)
two small bowls.

First you need to heat a glass of water in the first container to 32 - 37 degrees, approximately to body temperature, no more.

If you don't have a thermometer, try it by hand. The water should not be too hot, otherwise the slime will not turn out.

Drop 4-5 drops of borax into heated water and immediately mix the contents until smooth. Set aside for a while.
Pour 100 ml of water into the second container and use dyes to give it the desired shade, stirring thoroughly. Add glue mixed with glitter to it.
From the first vessel, in a thin stream, pour the solution with the activator into the colored water. Gradually, the water will thicken, and as soon as it becomes the desired consistency, stop adding tetraborate. If the diluted activator is not enough, you need to make another small portion and pour it into the second vessel.

The ideal slime does not stick to the hands, it stretches and does not tear, not too dense in consistency. Playing with it is a real pleasure for kids. But in no case should you taste such a toy. Although she looks very attractive, nevertheless chemical composition not entirely safe.

From water and starch

You can make slime without glue and chemical activator, and use potato starch as a thickener.

In addition to 200 grams of the main ingredient, you must have:

100 ml of water (32 - 37 ºС);
5 - 6 drops of dye (one or different for the original color);
dish (preferably enamelled).

The preparation of such handmade gum does not take much time.

First you need to combine starch and paints, gradually add water to the mixture, while stirring the contents all the time. You may need more or less water - you need to monitor the moment when the liquid turns into a pretty jelly lump.

Such a slime will not live long, only 2 - 3 days. But on the other hand, the toy is absolutely safe, because it does not contain chemical components.

You can use liquid starch for handgam, which is bought for automatic washing machines.

50 - 70 ml of this ingredient should be poured into a plastic bag and add 2 - 3 drops of paint (food or gouache).
Carefully pour glue (silicate or PVA) into this mixture - 30 ml.
Tie the bag and shake it until the contents inside are divided into two parts - a liquid and a lump of mucus.
Remove the clot from the bag and blot a little with a napkin.

In order for the slime to “live” longer, it should be placed in a plastic box or a small sealed bag.

Toothpaste technology

Toothpaste is an excellent thickener for slime. It is better to use gel options, they have a pleasant blue tint, and therefore no additional dyes will need to be added to the slime.

The recipe consists of:

one tube of paste (50 ml);
1 tablespoon sunflower or olive oil;
glitter, dyes (optional).

The gel paste must be squeezed into a small enamel pan and add paint if you want to change the color.

Mix everything thoroughly and put the container on low heat. You do not need to move away from the pan, you should stir the composition all the time for 8 - 10 minutes, until the liquid gradually turns into an elastic jelly substance.

After the mass has cooled down a little, you need to grease your hands with oil and knead the clot for 5-10 minutes.

Shaving foam slime

The original fluffy slime is distinguished by its airiness, it is also called fluffy slime.

To prepare such a toy, you must have:

shaving foam;
PVA glue;
food coloring (one or more);
activator (boric acid or lens cleaner).

Foam and glue are best measured in cups, circles.

It is necessary to mix 3 cups of foam and half a cup of glue in an enameled container until a homogeneous consistency is obtained.
Drop acid (4-5 drops) or lens cleaner (10 ml) into the mixture, continue stirring the contents until it stops sticking to the walls of the vessel.
Then you need to take out the slime and knead it in your hands for another 4 - 5 minutes, swing it on the table until you get the perfect chewing gum for your hands.

As an activator, you can also use sodium tetraborate powder, then it must first be diluted with warm water at the rate of 15 g of powder per 50 ml of water.

You can add dyes, or you can do without them - then the slime will be a rich white color.

From shampoo and salt

If parents are wary of recipes with the addition of chemicals, then they will surely like the following method. This is a version of slime without sodium tetraborate.

Method 1. For cooking, you must have:

shampoo - better than a thicker consistency, not transparent, but colored;
salt.

Pour 80-100 ml of shampoo into a small container and gradually add salt. It will require approximately the same amount, it all depends on the thickening process. As soon as the mass turns into one lump, the toy is ready for use.

The slime is not as viscous as with heavy thickeners, but the thinner substance has its advantages. Children are delighted with the “champing” of their new toy.

Method 2. In addition to shampoo, the recipe contains dishwashing liquid (100 ml of the main components each).

It's very easy to prepare everything. It is necessary to mix the components and put directly in the container in the refrigerator. After an hour, take out the work of art - the toy is ready.

Only between games with slime it is better to store it in the same refrigerator. So he will be able to please his excellent appearance. In heat, the toy will quickly melt.

Flour step by step instructions

This handgam recipe is perfect for toddlers who want to make their own colorful toy. This slime is safe, easy and fun to make.

You will need:

400 grams of flour;
50 ml of hot water (not boiling water!);
50 ml of cold water;
food colorings.

To make a slime, you must follow the step-by-step instructions.

Place the sifted flour into the container. Pour cold and then hot water into it, mix.
Drop a few drops of dyes. Mix again so that there are no lumps.
Place the container in the refrigerator for 2.5 - 3 hours.
Remove the mass from the container, knead until you get the perfect chewing gum for your hands.

Such a toy becomes not just another one in the baby's collection. It helps develop fine motor skills in children, improves psychological development child.

How to make slime with PVA glue

To create multi-colored slimes, silicate glue is most often used. It is transparent, which allows you to give the toy different shades using food coloring or gouache paints.

But PVA glue is also suitable for handgam recipes. Its structure allows you to quickly and reliably combine other components of the toy, gives it the right consistency and increases the shelf life.

Method 1. Air slime.

1. Pour PVA glue (100 ml) into the container and add a few drops acrylic paint. Mix all

2. Gradually pour two teaspoons of saline solution for contact lenses into the mixture and pour half a teaspoon of baking soda.

Constantly stir the contents until it thickens and stops sticking to the walls of the dish.
Such a slime stretches very well, even air bubbles can be made from it. To keep it longer - in between games it is worth placing it in a closed airtight container.

Method 2. Cosmic fluffy.

Children should make slime according to this recipe under the supervision of adults!

Combine in a bowl half a teaspoon of sodium tetraborate and a glass of cold water. Mix everything until smooth.
In the second container, prepare a mixture of 30 grams of PVA glue, a glass of water and two grams of phosphor paint.
Gradually, in a thin stream, pour the liquid with the activator into the second vessel, while stirring the contents.
Before the desired consistency is obtained, add 2 grams of iron oxide powder (used in laser printers). Continue mixing until thickened.

The toy turns out to be especially magical: it not only glows in the dark, but is also attracted to a magnet. Such magic delights little fidgets.

Plasticine toy

Children love to sculpt crafts from plasticine. This material is perfect for making cute soft slime.

To create an original slime, you should use not just plasticine, but neon or air. Such types in a wide range presented in the office departments.

Making plasticine fluffy is easy.

First, you need to soak a bag of gelatin (20 g) in 200 ml of cold water for an hour.
At the right time, put the pan with gelatin on low heat, stirring constantly until the mixture boils.
Turn off the gas and leave the gelatin mixture to cool.
During this time, knead plasticine (100 g) in your hands so that it becomes softer and “obedient”.
Put it in plastic container, add 50 ml of hot water, mix thoroughly.
Add the gelatin mass to the container, continuing to mix the contents until a homogeneous consistency.
Place the container in the refrigerator for one hour.

Such a slime is more dense, does not spread, it breaks, and then sticks together again easily. Plasticine manual chewing gum stored in the refrigerator. So the child can play with it longer.

From glue stick

In addition to using the silicate transparent glue and white PVA already mentioned above, you can make a popular toy using a glue stick. This option is more time consuming. But it is suitable if there were no other components at hand, or if you want to try something new.

Pencil rods (3 - 4 pieces) must first be removed, put in a glass or plastic container and heated in microwave oven until the glue becomes liquid. Then it is ready to be used in the slime recipe.

In a clean container, dilute borax powder (5 g) with water (100 ml).
Add 3-4 drops of paint to the adhesive mass, mix.
Gradually pour the activator solution into the vessel with glue, while stirring the contents.

The powder can be replaced with boric acid or saline for lenses. Then the recipe does not need water, just add 5-6 drops of acid or 10 g of saline to the sticky mass.

The characteristic smell of glue emanating from the toy can be interrupted by a pleasant aroma. To do this, it is worth dropping a little essential oil into the mass along with the dyes.

DIY transparent slime

Little inventors are constantly finding new components for their experiments to make their favorite toys.

Many people want to get not multi-colored, but transparent slime, or, as it is also called, glass. To achieve this result, you can use two versions of the recipe.

Method 1. Classic variant from standard components.

It is necessary to mix silicate glue and any of the activators in equal proportions until the desired consistency is obtained. Do not add any dyes - then the slime will look like soft glass.

Method 2. A more "chemical" version of the handgum.

For it you need to have:

half a glass of polyvinyl alcohol;
10 g activator (powder, boric acid or lens cleaner).

IN plastic utensils you should pour alcohol, add the activator and actively mix the components for 8-10 minutes, until the desired result is obtained.

Slime is like a dazzling precious crystal. But the polymer composition of such a toy cannot be called safe for a child. That is why it is better to use the proposed recipe in extreme cases. You should also play with such a slime carefully, be sure to wash your hands after playing.

To create such a culinary and toy masterpiece, you must purchase:

chewing marshmallow (marshmallow);
Nutella chocolate-nut paste (paste from other manufacturers, such as Merenda, Hazella or Biscochoc, is also suitable).

The cooking process itself is as follows:

Place a hundred grams of marshmallows in a glass container and put in the microwave. If there is no such technique in the kitchen, you can melt marshmallows in a water bath. You should get a homogeneous viscous substance.
In the melted marshmallows, little by little, by a teaspoon, add chocolate paste, while constantly stirring the contents. The process must be continued until the mixture sticks to the bowl and spoon, turns into one lump.
Wash your hands and start kneading the slime with your hands (sterile gloves can be worn). After 5-6 minutes, the slime will become plastic and elastic.

An edible toy will not last long for a baby. After all, she looks very appetizing, and he will not be able to restrain himself from tasting her.

Care must be taken to ensure that the tasty slime does not end up on the floor before the child eats it.

A variety of recipes will allow children to try themselves as experimenters-inventors and create original and bright toys. It remains only to choose the method of preparation and prepare the necessary components.

Good afternoon friends! Today I have for you unusual topic, and this topic will be dedicated to original toy called slime. Are you surprised or pleased? I know that many of my subscribers have small children, and even older children who are addicted to such creations and are constantly drawn to something unusual, well, like such a sticky and at the same time cool weirdo.

Of course, in the shops and supermarkets in the toy departments, there is nothing now, including this rather peculiar souvenir-toy. To be honest, I don’t really like this charm, but it’s not clear where to buy it, especially now everything is mostly made in China, it’s somehow dangerous and raises all sorts of doubts, so I suggest you make such funny and funny Velcro yourself at home.

By the way, this toy is called slime in another way. Have you ever made it yourself with your own hands? I think probably yes, since you are reading this article, well, let's understand and learn this work of art))).

I really liked the latest recipe, which I recommend to everyone to make. The pictures and photos in this note are taken from a free source on the Internet, and the videos are from the YouTube channel, if you want to see your inventions here, write your feedback and wishes below under this note.

If you have a lot of free time, then of course you can make a lot of slimes in different colors and different forms, and then, together with friends, arrange all kinds of tournaments.

Incredibly, this recipe is quite interesting and uses only 2 main ingredients. Can you imagine?! I suggest that those who have never created these beauties start with this simple option, because the ingredients that are used in this form are in any house or apartment.

If you start looking for and reading information on how to make a real lick, then you will definitely stumble upon the fact that the most common option is from sodium tetraborate, but you must admit that it is not always at hand, so you can do it by another method, using for this targets ordinary water.

We will need:

hot water- 0.5 st.
salt - 3 tsp
dye - a pinch or without it
stationery glue - 1.5 tbsp

Stages of work:

1. Take any container for work, for example, you can use a disposable container. Pour hot water into it, then add salt.

2. Thoroughly stir the liquid, it turned out to be salty water, now what? And now you have to add some dye or paint.

3. After that, you have to cool the water, let it stand on the sidelines and cool down. And then you take stationery glue and pour it into the liquid.

Important! Now leave this mixture for 20 minutes, and you don’t need to interfere, they added glue and left it in this position to stand on the table.

4. After the time has elapsed, start stirring with a spoon, the glue should begin to curl by this time.

5. The glue separated from the water and became like a cool consistency, take it with your hands and try to catch this funny weirdo.

6. And here is a funny and mischievous licker Pink colour, but you could add red dye and it would be red. The toy is stretchy, but a bit stiff, if you want a more liquid version, then see the following descriptions.

Sculpt from flour and shower gel

The next one is a fairly easy and low cost option that young kids love because it's safe and not as slippery and runny. And how he develops fine motor skills is also not unimportant. By the way, do you know how this miracle toy appeared that conquered the world?

It turns out that it was invented a long time ago, it was in 1976, then such a toy was called a slime, but then when for the first time a film about ghost hunters was released on TV screens, and there was the most important and cool green and inimitable green hero, whose name was Lizun.

Since that time, this name has taken root, our children know these two concepts, so do not worry if you make a reservation, they will definitely understand you.

We will need:

shower gel - a small amount of 2-3 tbsp
flour - by eye

Stages of work:

1. First, take a clean and wiped dry plate, pour liquid shower gel into it. Take the gel with the volume that you want to see this Velcro in the future, for someone it will be enough for a small lick, someone wants to make a huge one.

2. Next to the gel, start adding regular wheat flour. Stir until smooth, what do you think happened? Actually nothing yet, the mixture looks like sticky dough. Add more flour and stir until combined.

And then, with the help of your hands, start kneading and you will get super soft and elastic plasticine, or the same Velcro, which wrinkles very well in your hands and is pleasant to play with.

In general, the toy is ready for fun. Run to your friends and show off your masterpiece.

Dishwashing liquid and starch slime

This option will appeal to young children, it is much harder than the previous one, it resembles something like modeling dough, the mass is elastic and pleasant to the touch, with the kids you can make all kinds of crafts from this mixture, as they say, sculpt, and use instead of plasticine.

Many claim that a sticky monster is obtained from such ingredients, but for some reason I got a mass similar to something else, try to do it and write what you got. After all, you will cope with this recipe in 2 minutes, and how much delight your kids will have.

We will need:

starch - 2 tablespoons with a slide
dishwashing detergent Feri or Aos can be different - by eye

Stages of work:

1. Take a bowl and pour starch into it, but so that it covers the entire surface of the bowl, that is, distribute it evenly. Then add dishwashing liquid to the very center.

2. Add the agent as much as you need until you get a homogeneous mixture that you like. It can be made a little softer, or cooler, see for yourself to play later on.

In this version, no dye was used, because basically all dishwashing detergent already has various colors, it can be green, yellow and orange, and in principle any. So take your remedy and wonder!

Video on how to make slime easy and simple

Probably everyone wants not only a handsome and funny friend with whom you can have fun and humor, but also make it quickly in a couple of minutes, so this recipe will use an air freshener, it’s unbelievable, but it’s a fact, even from this products are already making this slime.

If you want to understand in more detail and in detail, then see this step by step video from the YouTube channel, it is quite popular in terms of views, and I think you will like it:

I also want to say that you will find out why the slime may not work out, which freshener is worth taking.

How to Make a Sticky Monster in 5 Minutes with Shaving Foam

Such a bag can rightfully be called an anti-stress, because you can do anything with it, crush, throw and even sculpt. In addition, you make it yourself from different stuff, which means you develop Creative skills, and also learn how to correctly add certain ingredients by eye, which is also not unimportant.

It turns out you, like the very scientist who measures, cuts himself, well, or a teacher. And then bam and done. By the way, such a toy can be put in a net and then observe how a mass of sticky mass passes through it.

We will need:

shaving foam - 1 tbsp
silicate glue - 2 tbsp
Laundry detergent Losk

Stages of work:

1. Take a deep cup and add shaving foam to it. Now add silicate glue to the foam and start mixing with a stick, or you can take an unnecessary simple pencil. Then pour a little Gloss to thicken.

2. Here is such an airy and fluffy, plus a stretching little fox jumper turned out. Keep it in a jar so it doesn't dry out.

Do-it-yourself slime without PVA glue and sodium tetraborate

Now let's look at the most popular and well-known option that everyone knows, it has been tried by thousands of subscribers, you will definitely succeed in doing it.

I remind everyone that sodium tetraborate can be bought at any pharmacy, do not be afraid of this word, it is due to it that the mass will thicken.

We will need:

PVA glue Luch - 1 pack
yellow dye
sodium tetraborate - a couple of drops
shaving foam - 2-4 tbsp
puzzle glue - 1 jar

Stages of work:

1. Pour a whole pack of PVA glue into a glass jar, then add about 2-3 tablespoons of shaving cream. Mix very thoroughly.

2. Now add yellow dye, if you want your sticky souvenir to be more saturated, pour in more dye, dimmer, then less. Stir.

3. After all these actions, it remains to pour in a couple of drops of sodium and all our liquid will begin to gradually curdle, you just have to mix well with a spoon.

4. How cool and soft the slime will be, but it can tear, if you do not want this to happen, make it even more elastic.

To do this, take and pour puzzle glue into another container and pour in a couple of drops of sodium tetraborate, mix, do not overdo it, otherwise the whole mass will curl up very quickly, and then simply combine the yellow and transparent slime into one. It will turn out cool and super, like a toy in a store, I consider this option one of the best recipes.

By the way, many children use this gift as a keyboard cleaner.

Perhaps your slime will dry out over time, so it doesn’t matter, make a new one or just moisten it with water. Or you can go to the store and buy yourself another one, but this is an extreme method, I think it’s always more interesting to make such funny trinkets myself.

We make at home from toothpaste

Each apartment has personal hygiene products, so go to the bathroom and get toothpaste. And take sweets from the kitchen).

We will need:

toothpaste - 1 tbsp
sugar - 0.5 tsp

Stages of work:

1. Put some toothpaste in the cup, since the example uses blue paste, then the slime will turn out accordingly blue color, if you have another one, then our funny weirdo will turn out the same.

Stir the paste into a bowl with a spoon. Enter into it granulated sugar. Well, the mixture turns out to be sweet, probably to the taste).

2. Microwave this jar for 15 seconds. What do you think will happen?

Important! Be sure to cover the cup of toothpaste tightly with a lid.

3. Now you need to put the mixture in the refrigerator for 3 hours after warming up, by the way, it has already increased in volume, has become soft and elastic.

4. Well, after the time is up, enjoy the game.

5. This species resembles chewing gum, or something alive, you can make any animal out of it, what do you usually do?

Easy 2 Ingredient Recipe

Moving on, now let's make out liquid glue slime and the addition of ethyl alcohol. It also turns out to be interesting and seems to be alive, I liked this look for its simplicity, literally in 30 seconds or 1 minute you can already enjoy the game with this fun and easy to control toy.

We will need:

liquid stationery glue - tube
ethyl alcohol - 50 ml

Stages of work:

1. Take a container and pour clerical glue into it first, and then alcohol. Alcohol can be purchased at a pharmacy.

2. Ethanol you need to add slowly, it acts as a thickener, if you go too far with it, then the slime will immediately become hard. Therefore, it is best to pour it into a regular syringe and dose a little into the glue. Each time you drop alcohol into the container, stir the mixture with a stick.

3. And this is what happens, by the way, until the glue is completely curtailed, you can add a dye or paint it with an ordinary felt-tip pen. Wow, it's creative.

4. Such an original mixture at first glance turned out, which really looks like this modern fluffy slime toy.

5. As soon as it becomes difficult to mix the liquid in the cup, put it on the table and knead it with your hands, you will feel some small water, squeeze it out, over time after pressing it will disappear by itself.

And here it is so thick, but at the same time, a sticky and elastic toy will turn out. Make such a giant and you will enjoy surprising everyone. Play twist on your finger, make funny faces, etc.

Funny Shampoo and Sugar Thing

If you want to make this miracle of science transparent, so let's make a jumper or how else to call it a licker using ordinary improvised means, two ingredients are used.

Guess what? I won't hide it, and you'll see for yourself soon. Cheap option, but used by most children huge demand because it is lightweight and affordable.

We will need:

pantin provi shampoo - 5 tbsp
sugar - 2 tsp

Stages of work:

1. Randomly take a shampoo by eye, use any, but it is better to take Pantin Pro and add sugar to it, stir. Well, it's a hell of a mix.

3. But he is magical and unique, like a slime glass.

Facial film mask licker

This recipe will make a multi-colored slime, which of course will appeal to everyone, both children and adults.

We will need:

PVA -1 bottle
dye
Feri dishwashing detergent
boric acid - 25 ml
dyes

Stages of work:

1. Pour PVA glue into the jar, then add boric acid and mix everything very thoroughly. After that, pour in the feri, just a little, about 1-2 tablespoons. Stir, wow, the mass will trample right before your eyes, it will become fluffy.

2. Add another tablespoon of feri and start kneading the mixture with your hands.

3. Pour in any dye and mix with your hands. You will get a real slime like in the movies, but if you want to make a lot of toys, then divide the resulting mixture into several containers and add the desired dye color to each container.

5. And then in one bowl combine all the options, you get a rainbow-arc. Play and create for your health! It turned out very even nothing, and most importantly, that the consistency is just the same, which everyone is so stubbornly looking for everywhere.

Learning how to make colorful slimes with Stasya Mar

Now I propose to watch a video from one well-known blogger from the YouTube channel, with it you will also learn how to make this magnificent awesome little thing in a couple of minutes, and you will learn how to make slimes in three main ways, I note proven ones, so repeat:

So how did you like it? Unrealistic, but even salt is used))).

Funny bauble made of stationery glue and soda

The next option, please note, will be without clerical glue, but from a pencil and, moreover, without sodium carbonate, quite interesting and unusual way which is based on soda. The result is cool and you will also want to make such a friend.

We will need:

glue stick - half
soda - 0.3 tsp
dye
Weasel detergent

Stages of work:

1. Cut the glue stick into pieces round shape, as if you were cutting a cucumber for a salad. Place on a plate and pour in 1 tablespoon of water, now melt in the microwave for 20-30 seconds. While the glue has not hardened after the microwave oven, add baking soda and pink dye to it. Stir.

2. Add detergent and stir, knead for 30 seconds, then add more Laski and stir for one minute.

3. After all the manipulations, you should get such a lick that is not sticky to your hands, it does not stain your hands. But at the same time, it stretches well and is fun to play with.

We create from PVA glue and boric acid

The last version of Velcro will also make unusual ingredients, such toys are usually made for sale. This perfect recipe, and if nothing has worked out for you before, use this one, and you will definitely get this miracle. And you will play with it, make balls and much more.

We will need:

PVA-K glue
dye - any
detergent gel for washing Persil - 1 drop

Stages of work:

1. Pour out the glue, take PVA-K glue and then you will definitely succeed. Add a dye of any color and a drop of washing gel.

2. Stir. If the mixture is not thick enough, then you need to add more washing gel.

3. And here it is, a great cool slime. Make it big or small, whichever way you like to play more.

4. Create, it is viscous, elastic and does not tear somewhat, make it red, white and other colors. Have fun and don't be upset if you can't build it the first time, don't overdo it with the gel.

On this I have all my dear guests and subscribers of the blog! I say goodbye to you, let this creative work will give you a lot positive emotions And good mood. Bye everyone!

Hello! In this article I will write several ways how at home you can make the famous and beloved slime by many. This toy was very popular in my childhood, because it was in the 90s that the cartoon and the movie "Ghostbusters" were shown. In this cartoon there was a ghost Lizun, which became the prototype of the famous toy. She could stick to a wall, a table, quickly change her shape.

You can also make a similar toy yourself. This interesting activity for kids (they love all kinds of experiences) and adults will enjoy the process of creation too. So, I write some of the best ways.

According to this recipe, I made a slime yesterday with my daughter. The process is very fast, it takes a couple of minutes. First you need to stock up on the necessary ingredients. It turns out according to this recipe a substance similar to "smart plasticine". For it you will need:

PVA glue - 100 ml
a solution of 4% sodium tetraborate (boron) - a few drops
food coloring (or brilliant green, or gouache)
plastic container
wooden stick (pencil or spatula)

From these proportions, a fairly large slime is obtained. If you need a small one, reduce the amount. Can make multiple slides different colors, so the children will be much more interesting.

I did it in a jar of gouache. You can use any plastic jar or container. First, pour PVA glue, add any dye that you have available to it. I used food coloring orange color(I still have from Easter). You can also paint with greenery or gouache. Mix the glue with paint thoroughly with a pencil until a uniform color.

Then pour sodium tetraborate and mix well. If tetraborate is not enough, then add it little by little. The glue should become thick. The mass will begin to peel off the pencil and jar. After that, you can take it with your hands and knead. It relieves stress in adults well, on the table it slowly spreads into a small smooth puddle.

I didn’t like the fact that such a slime (or smart plasticine, slime or handgam, which translates as chewing gum for hands) paints hands and a table. I think it would be better with gouache. It also doesn't have a very pleasant smell. Optionally, you can add flavorings to it, if there are any in the house.

The price of such a slime is small. I bought glue for 35 rubles, sodium tetraborate is sold in any pharmacy without a prescription for 19 rubles, the dye cost me 5 rubles. Total - 59 rubles. But I used glue for one slime somewhere in the sixth part of the jar, less than a third of the tetraborate.

It is important that the glue is fresh, homogeneous, without water. Nothing will work out of bad glue. Keep the mass in a closed jar so that it does not dry out.

Here's what I got (video):

Slime without sodium tetraborate

You can make a slime very similar to the previous one, only use liquid washing powder instead of sodium tetraborate. It is the washing powder in the gel, not the fabric softener and other gels.

Take a look at how the creation process takes place:

We make a slime from plasticine and gelatin

This method is popular and good feedback. They write that it turns out a good slime. But such a toy is short-lived. Suitable for young children to develop fine motor skills. You will need:

plasticine (color optional) - 50 gr.
gelatin - 25 gr.
warm water - 30 ml
plastic container for mixing ingredients
a metal container for heating gelatin (you can use plastic or ceramic if you use a microwave)
wooden stick for stirring

First in metal container pour gelatin with cold water so that the water covers it. Leave for 20 minutes for the powder to swell. After that, it is necessary to heat the mass so that it completely dissolves. This can be done in a water bath or in the microwave. In the second case, heat the gelatin for about 2 minutes.

Pour plasticine into a plastic container warm water, mix with a wooden stick until smooth. Add the cooled gelatin to the plasticine and mix everything thoroughly again. Then put in the refrigerator to harden our slime. When it freezes, it's ready! The finished toy should also be stored in the refrigerator in a closed container.

How to make slime with starch and PVA glue

This is also an easy way, like the first with the second. The difference is that liquid starch is taken as a thickener (and not boron or liquid powder). Required components:

PVA glue - 100 ml.
liquid starch (this is not food starch, but chemical agent for washing). You can take food, but with it the result will be worse. If you take food starch, it will need to be mixed with water - 140 ml
dye (brilliant green, gouache, food)
plastic bag

They write that it is according to this recipe that the slime will turn out, as in the store. To make such a slime, you need to pour starch into a small bag, add paint and glue to it.

Mix everything thoroughly with your hands until smooth through polyethylene. After that, the mass should be given time to freeze slightly in the refrigerator (about 3 hours). Everything, the toy is ready, you can play!

If excess liquid remains after mixing, it must be drained.

Other slime options at home

There are many more various options. But they don't guarantee good result. Most of those who did according to other recipes write that nothing happened. For example, slime is made using baking soda. Only in this case a very hard substance is obtained, which cannot be called a lizun, a handgum, etc. in any way. There's no way to crush it. So it's better not to waste your time making such a creature.

There is also a way to make slime from shampoo and titanium glue. But the slime by this method, too, most likely will not work. It will spread, stick to your hands.

There is also a way to make a toy using polyvinyl alcohol instead of glue. But this method is quite troublesome. First, you need to find this very alcohol in powder, dilute it correctly with water. And then cook for 35 minutes. I think not everyone wants to bother like that when there are ways that are more affordable and faster.

In some sources I found a recipe for making slime from flour, water and dye. But every person knows that by mixing flour with water, you get dough. You can sculpt from this dough, it's safe for kids, good for fine motor skills, but this is not slime. I make this colored play dough for my kids because it is softer than plasticine.

Store the slime in a closed jar with a tight lid. Otherwise it will dry out.
Do not store the toy in warm places. Moreover, do not put it on the battery, in the sun.
Do not place handgams on a fleecy surface. Because of this, hairs will stick to it, it will lose its structure and smoothness.
You can add flavorings or essential oils during cooking to kill the smell of glue and other ingredients.
You can experiment with the composition of the mixture. Two drops of vinegar can be added to the paint mixture - the slime will stretch better. If you add a little hydrogen peroxide, the mass will turn out to be more airy, not sticky. If you add glycerin, then the "crusher" will become slippery.

If you know others good ways how to make another slime at home, write in the comments! And share this article with your friends on social media. networks. See you!

The name of the popular toy was the hero of the famous cartoon about ghost hunters - Lizun. This amorphous, jelly-like creature is loved by children, so the toy remains popular. In addition to entertainment, handgam also benefits the child by developing it.

Characteristics of the toy

A popular toy has acquired the name of a handgam. It can be crushed, twisted, deformed, tossed. Slime can return to its original shape, stick to surfaces, peel off from them.

The jelly-like, but not melting consistency of the toy helps the development of fine motor skills of the child's hands.

Handgam exercises help relieve stress by calming the nervous system. The toy can be found in the store, but many parents are concerned about the composition of the material from which the slime is made.

Therefore, most people prefer to make their own handgam from safe materials. Moreover, the process is not particularly difficult, and the costs are minimal. There are many materials for creating slime at home:

water with flour;
PVA glue;
shampoo;
toothpaste;
shaving foam;
paper;
soda;
starch;
plasticine.

This an exciting activity will occupy the child and divert the attention of the adult from worries. But it is better not to give such a toy to children under 5 years old, as they may try to pull it into their mouths.

In addition to the main components, when creating a slime at home, you will need to prepare containers for mixing the bulk. You will need stirring sticks, rubber gloves, a plastic bag.

Creation home version slime is a creative process. Instead of food coloring, gouache is suitable. In art supply stores, you can find pearl paints, fluorescent, with sparkles.

Gives a pleasant smell to the toy aroma oils just add a couple of drops. To bring the toy as close as possible to its prototype, add a few drops of glycerin.

Handgum will become slippery. If you want to give airiness to the mass, you can add hydrogen peroxide. Each time you can create a completely different slime, which the child will be very happy about.

Making a Water Slime

This toy is very similar to the store version of the slime. To make it not too liquid, you can use more glue. So, below is a detailed description of the process of how to make slime from water at home. Components:

PVA glue - 100 g;
warm water - 50 ml;
sodium tetraborate (4% solution) - 1 vial / 100g of glue;
food coloring, you can gouache or brilliant green.

Adhesive must have a valid expiration date. Sodium tetraborate can be found in a pharmacy or in a chemical reagents, radio goods store. A quarter cup of water at room temperature is poured into a prepared container to create a slime, PVA glue is added.

If the mixture turns out to be a little watery, then the amount of glue needs to be increased. After thorough mixing, sodium tetraborate is added to the mixture. If it is in powder, then its aqueous solution is made - 1 tbsp. l. powder in half a glass of water.

But you should not increase the portion of sodium tetraborate, as the mass can become hard, lose plasticity.

After that, the solution is poured into the container. It remains to add the dye. The mixture is poured from the container into a cellophane bag, well kneaded. The toy has a chemical composition, so after playing with such a slime, you should wash your hands.

How to make slime with PVA glue

To make a slime from PVA glue, you will need minimum set ingredients:

PVA glue - 3 parts;
shampoo - 1 part;
food coloring (you can gouache) - a pinch.

All components must be mixed, placed in a bag of polyethylene. It is necessary to mix until a uniform mucus is obtained.

The quality of the glue directly affects the result. It should be fresh, it is desirable to choose a transparent glue. Construction adhesive "Titan" of a high degree of viscosity is in demand.

It does not contain toxic substances. The elasticity of the slime depends on the amount of glue. Increasing the amount of glue increases the elasticity property. The shampoo will give the toy a pleasant aroma, and to get your favorite color, you can use gouache or brilliant green.

Making a slime without glue

The method is the simplest. All you need is a tube of toothpaste. The paste is placed in the microwave for a couple of minutes, then taken out, crushed and put back in the oven.

After repeating the procedure three times, the paste is cooled. Then she is kneaded with oiled vegetable oil hands. Slime is ready.

Slime without the use of sodium tetraborate

Slime can be created without sodium tetraborate if it is not available. The toy will turn out no less bright and interesting. The only drawback is the short service life, only 2 days. Required Components:

PVA glue -100 ml;
baking soda - half a glass;
water - 50 ml;
any color food coloring.

A small amount of water (15 ml) is mixed with the adhesive to liquefy it. Then the dye is added until the particles are completely dissolved. Now you need to make a slurry of soda and water. Baking soda should be kept on hand as it usually has to be added.

It remains to mix both masses until completely homogeneous. You can place it in a plastic bag and shake it to achieve the desired uniformity. After all the work done, you can use the resulting slime.

If it seems watery, you need to mix it again until the desired density is obtained. If necessary, increase the content of soda and glue.

The toy should be stored in a closed container, as it will become less and less effective day by day.

Perhydrol toy

You can apply another recipe that makes the slime more elastic. The future lizun resembles a bouncing ball. To create it, you need a set of components:

Starch is diluted with water and mixed. Glue is added to the mixture while continuing to mix.

Then pour a teaspoon of perhydrol, add the dye and mix again until the mass is completely homogeneous.

DIY shampoo slime

For lovers of cleanliness during creative process there is a simple recipe for making shampoo handgam. You only need a couple of components:

50 g of any shampoo;
50 g dishwashing detergent.

Both components are thoroughly mixed, after which they are removed for one day in the refrigerator. You can play the next day.

At the end of the games, the slime should be put in the refrigerator. If a lot of dust and dirt has stuck to it, then it is better to get rid of it and make a new one.

If you need a transparent handgam, then you need to take care of the transparency of the selected components.

How to make a slime out of toothpaste

This is one way to create a slime with glue. You only need two components:

PVA glue - 1 tbsp. l.;
toothpaste - half a tube.

A homogeneous mass is created, after which it is placed in the refrigerator for 15 minutes. You can add more glue to achieve the desired consistency. Such a product becomes a slime when room temperature, and when cold, it is an anti-stress toy.

Other ways to make slime at home

Made from polyvinyl alcohol

Required Components:

polyvinyl alcohol powder;
a couple of st. l. borax solution;
glass of water;
food coloring.

You will need iron utensils. Having defined required amount polyvinyl alcohol powder per package, you need to boil it for 40–50 minutes.

It is necessary to stir constantly. Borax is dissolved in water. If there is a ready-made solution, then you need to take several vials.

After that, both solutions are mixed, combining 3 parts of alcohol with 1 part of sodium borate.

In the process, it will be possible to observe the transformation of the mixture into mucus. To give a pleasant smell is added essential oil can be tinted by adding food coloring.

Plasticine handgam

A simple and bright plasticine slime is made from the following components:

1 pack of gelatin;
plasticine - 1 piece;
water - 50 ml and more to dissolve the gelatin.

Gelatin is dissolved in cold water according to the instructions on the packaging. After waiting an hour, completely dissolved gelatin is placed on the stove until it boils, then left to cool.

Plasticine, thoroughly kneaded by hands, is added to warm water, trying to stir until a homogeneous mass is obtained. Cooled gelatin is added to the resulting mass. After mixing and cooling, handgam can be used for games.

From starch

This is one of the methods for making toys in the absence of sodium tetraborate. It is necessary to prepare two ingredients in equal proportions:

starch;
water.

The components are mixed, a dye is added to them. It can be brilliant green, gouache, food pigment. The mass is formed into a ball and used for the game.

Making a slime from starch and glue

To create a toy, you need a simple set of ingredients:

liquid starch (for washing clothes) - 70 ml;
PVA glue - 25 ml;
food coloring;
polyethylene bag.

Starch is taken and added to the bag. It is better to use liquid starch or simply dilute with food water in a 1: 2 ratio. Dye is added to it, just a couple of drops. Excess dye will make the toy stain the hand.

After thorough shaking, PVA glue is added to the mixture. The contents are mixed well again. The released moisture can be drained.

After all the manipulations, the finished slime is removed from the package and blotted with a napkin. The quality of the toy will depend on the proportions of the components introduced.

If you use more glue, the toy will become too sticky.

More starch will give the slime extra hardness. You need to store handgam in the refrigerator, about 5-7 days. To avoid dust settling, the toy should be stored in a tightly closed container or bag.

slime for baby

The safest handgam for absolutely small child can be made from flour. Natural dye is used, so you can not be afraid that the child will pull the toy into his mouth. Flour slime has a very short shelf life, but making a new one will be easy.

Ingredients to prepare:

wheat flour - 400 g;
cold and hot water - 50 ml each;
dye ( onion peel, beetroot juice).

Sift the flour into a bowl, pour cold and hot (but not boiling water) water in turn. After mixing, it remains to add only coloring vegetable juice.

It is necessary to cool for 4 hours in the refrigerator.

At home, it is easy to create a slime from the components available in the house. This recipe consists of equal proportions of the following components:

Instead of alcohol, you can take vodka, but it will need one and a half times more than glue. The ingredients are mixed, a dye is added.

The resulting homogeneous mass should resemble wallpaper glue. Now you need to take it with your hands and hold it under running cold water.

This will lead to solidification of the mass. Slime is ready.

The simplest handgam

To work, you need only two main ingredients: water and starch. The components are mixed in equal proportions.

To give greater hardness, more starch should be used. To make the toy beautiful, you can add dye. Such a slime tends to stick to surfaces, but does not jump.

A toy can be created using just two components in equal proportions:

shampoo;
liquid soap (the color should match the shade of the shampoo).

After mixing the components, a homogeneous mass in a tightly closed container is placed in a refrigerator. If handgam is handled carefully, then its shelf life can reach a month. To do this, you need to protect it from dust, debris, and after the game put it in the refrigerator.

From sodium tetraborate and clerical glue

The drill used in the composition makes the toy similar to the store version. Composition:

half a teaspoon of borax;
30 g of transparent stationery glue;
food coloring green and yellow;
one and a half glasses of water.

You will need two containers. In one, you need to dissolve sodium tetraborate powder well in a glass of water. The second container is filled with half a glass of water, glue, two drops of green dye and 5 drops of yellow.

A solution of sodium tetraborate is poured into the mixed homogeneous mass from the first container. This should be done slowly, constantly mixing the resulting mass.

Gradually, the properties of the resulting mixture will reach the desired condition, and the slime will be ready for use. You should watch the child so that he does not take the toy in his mouth.

From soda

To create a slime, you need very few components:

soda;
liquid dishwashing detergent;
water;
dyes.

In accordance with the right amount slime container is filled with dishwashing liquid. Soda is added to it, mixed thoroughly.

If the mass seems thick, you can add a little water to dilute and mix.

You can also vary the amount of detergent to achieve the desired consistency. Dyes are added to change the color.

From washing powder

To create such a slime you will need:

liquid laundry detergent - 2 tbsp. l.;
PVA glue - a quarter of a glass;
dye.

The glue is poured into the prepared container, then you need to drip a few drops of dye. After mixing, detergent is added.

Stirring is continued until the mixture becomes sticky and thick. An excessively thick mixture is diluted with washing liquid.

Now you need to put on rubber gloves and knead the mass like dough. The liquid released during the process is removed.

It turns out a viscous, rubber-like mass. The toy is well preserved in closed jar. If she begins to change her appearance, then she is put in the refrigerator.

This toy can glow in the dark. Required Components:

borax - half a teaspoon;
iron oxide;
glue - 30 g;
Neodymium magnets;
phosphor paint;
water - half a glass.

Borax is dissolved in a glass of water. Half a glass of water is poured into a separate container with the addition of 30 g of glue. After intensive mixing paint is added. You can use regular dye, but then the toy will not glow.

In cooked adhesive mixture slowly add the borax solution. In this case, it is necessary to mix the mass thoroughly until the consistency reaches the desired density. The rest of the borax solution is poured out.

To give the toy magnetic properties, iron oxide is added to the mass.

It is necessary to lay out the resulting mass on the surface of the table and level it. Now you should pour iron oxide on it, evenly distributing it.

It remains to mix the resulting mixture thoroughly until a uniform gray appearance. The magnetic handgam is done. You can bring a magnet and see how the slime reaches for it.

From shaving foam

To make an elastic, large slime, you will need several ingredients:

shaving foam;
borax - 1.5 tsp;
PVA glue;
water (warm) - 50 ml.

Borax dissolves in water until the crystals completely disappear. Shaving foam and glue are squeezed into a separate container.

After stirring, you need to add a couple of tablespoons of borax solution. As you stir, the mixture will thicken. The solution must be added gradually until the mass begins to lag behind the walls of the container. Slime can be considered ready when it easily comes off hands.

paper handgam

Making such a toy out of paper is impossible. This material does not possess the properties necessary for the product: ductility, viscosity, stickiness. The only option for creating a paper handgam is origami.

How to deal with slime

If the toy does not work, then you need to try to find the right amount of ingredients and their proportions empirically. A properly made slime should be taken out of the container in a single mass, viscous and homogeneous. If inhomogeneities are visible, you just need to rumple the product for a couple of minutes in your palms.

If the handgam is too sticky, it is difficult to clean the hands after the game, then you need to dilute it with a liquid ingredient from the composition. Water, liquid starch used in its manufacture can be used as a diluent. An overly liquid slime just slips off your fingers.

The situation is corrected by adding glue, flour, borax solution, which also depends on the component composition.

There is also a fun game that the child will love. Slime can be grown. If you put it in the refrigerator in a tightly closed container with water all night, then in the morning you can find an enlarged slime.

The kid will be interested in doing this manipulation on his own. Lizun is best preserved in a cool place and tightly closed container. If these conditions are neglected, then a homemade handgam can simply dry out.

Therefore, immediately after the game, you need to take care of saving it. If there is a drying of the handgam, then you can try to reanimate it.

The method of resuscitation depends on the composition of the product. If water was used, then the toy is reanimated by moisturizing it. But a completely dried handgam cannot be restored.

It is better to make a new one, especially since it is not expensive and very fast. You should not keep the toy on a surface with a nap, as it will quickly fill with dust and lint, losing its properties.

Playing with a slime is very popular with children, soothes adults. It is only necessary to explain to the child that it is impossible to bite and lick the toy. Wash your hands before and after playing.

The following video also shows very clearly how you can make a toy called slime yourself.