Children's games with shaving cream. Gum for hands or a manual ghost - how to make a slime yourself From titanium glue and shampoo

If a man lives in the house, then a whole mountain of accessories automatically comes with him. Cooler than the toy Ken from childhood.
Among the "accessories" there will certainly be shaving foam. Even if the faithful / brother / son is a fashionable bearded man. It turns out that this hygiene product, in addition to the main one (to pacify facial hair and not only), has at least 10 additional and completely unexpected functions. Details are below.

Through trial and experiment, it turned out that the usual shaving foam is a very useful thing in the household. After all, with its help you can not only get rid of the bristles, but also put things in order in the whole house. For example:

1. Clean the carpet from stains

Treat the stain with foam, walk on top with a damp sponge and leave to dry naturally. Vacuum after a few hours, removing the remnants of the dried foam, and rejoice at the clean carpet again.

2. Clean and polish stainless steel surfaces

A layer of shaving foam and a dry sponge will return the presentation to both old pans and your favorite refrigerator.

3. Keep the bathroom mirror from fogging up

Treat the surface with foam, wait half a minute and wipe dry. The product forms a thin water-repellent film that will not allow the glass surface to fog up under the influence of steam. The trick will also work with shower doors, glasses, windows, and other glass/mirror objects.

4. Remove traces of careless manicure from the skin

Often, trying to restore beauty in a hurry, girls accidentally smear varnish everywhere (except for the nails themselves). A small amount of shaving cream will solve this problem. Sprinkle the errors and rub a little. The lacquer will peel off the skin, but will remain "sit" on the nails.

5. Clean your jewelry

The composition of the shaving foam is not aggressive, does not contain harsh abrasive particles, but is full of cleansing components. This makes her an excellent candidate for delicate work such as cleaning jewelry. The recipe is the same: add a small amount of foam, wipe, dry naturally.

6. Clean stains on the stove or oven without scratching

The explanation is a combination of points 2 and 5. And, yes, you can safely arm yourself with a metal brush for dishes.

7. Mute a creaking door

Try lubricating the loops with shaving foam. Perhaps this will not eliminate the problem forever and completely, but it will give you at least a couple of evenings in silence.

8. Soothe skin after sunburn

The secret is in the softening ingredients and the cooling effect. It will also help relieve itching from insect bites.

9. Make paint for children that can be safely painted on windows and furniture

Just add some food coloring to the foam. Kids will be delighted with permissiveness, and you can easily eliminate the consequences of children's creativity with the help of an ordinary wet sponge.

10. Going on a hike? Take a small bottle of shaving foam with you

After all, with its help you can wash the camping pot to a shine, grease from your hands and soothe the skin after contact with the sun's rays and obsessive insects.

Slime or slime (from the English Slime) is a toy that has a viscous jelly-like shape, resembling a non-Newtonian liquid. It has two main components, a polymer and a thickener, originally they were a polysaccharide or guar gum and borax. This is such a toy that you don’t have to buy it in a store, as there are many ways to make it yourself at home from improvised ingredients. There are at least 22 recipes for this type of toy.

There are many ways to create this toy. But since this is a toy, you should not forget about safety measures when making it, as well as while playing with it.

From shampoo and salt

One of the simplest methods for it will require the presence of:

• Shampoo;
• Salt.

1. Take about 4 tablespoons of shampoo and add a little salt to it.
2. Thorough mixing is required after each addition of salt.
3. This is repeated until the mixture becomes viscous.
4. After that, put the resulting mass in the refrigerator.

From plasticine

Children will love the game, as well as the process of creating plasticine slime.

Ingredients:

• 1 sachet of gelatin;
• A piece of plasticine;
• Water.

1. Gelatin is poured into cold water.
2. The correct proportion is indicated in the instructions on the package with gelatin.
3. After an hour, the pan is transferred to the stove until the gelatin mixture boils.
4. While the gelatin is being prepared, it is necessary to knead a piece of plasticine with your hands.
5. 50 g of water is poured into a plastic container and plasticine is placed.
6. Everything is thoroughly mixed until smooth.
7. When the gelatin has cooled down a little, it must be poured into a container with plasticine.
8. Mix everything well.
9. As soon as everything cools down, you can play with the toy.

Soap and salt

The recipe is very similar to making a salt shampoo slime.

But there is a difference in the composition:

• Liquid soap;
• Salt;
• Soda.

1. Salt and soda are gradually added to the soap.
2. There is mixing.
3. This is repeated several times until a homogeneous viscous mass is formed.
4. The end is the exposure of the mass in the cold.

From shaving foam

To make a shaving foam slime you will need:

• Tube with PVA glue;
• Shaving foam.

1. The plate is filled with glue.
2. A little foam is injected into it.
3. Everything is mixed up.
4. The foam is added until there are signs of the appearance of the correct consistent mass.
5. All the slime is ready, but if its white color does not suit you, then you can add a couple of drops of coloring matter. If you add not one, but, for example, two colors, then the slime will acquire a marble pattern.

From flour

Slime made from flour is the safest toy recipe. Even small children are allowed to play with it, especially if substances of natural origin act as a dye. The use of natural dye will only affect the degree of staining in the direction of less intensity.

Components:

• Flour;
• Hot water;
• Dye;
• Apron.

Subsequence:

1. To 2 cups of flour sifted through a sieve, ¼ of the capacity of the glass is poured into cold water.
2. Next, add ¼ of the capacity of the glass of hot water (not boiling water).
3. Thorough mixing is required to achieve complete homogeneity.
4. Coloring is added if desired, it is better to add more food coloring.
5. Mix thoroughly until a sticky consistency is formed.
6. The slime, together with the container in which it was prepared, is placed in the refrigerator for at least 2 hours.
7. When the mixture has completely cooled down, you can play with it.

From nail polish

1 way

Perhaps such a recipe will not meet the expectations of the child, but you can experiment. This requires:

• Sunflower oil - about 100 ml;
• A jar of nail polish.

Pour the varnish into a bowl with oil, mix until all the dye from the varnish is knocked down in one ball. This will mean that the slime is ready.

Such a slime turns out to be small, smelly, a little greasy.

2 way

• Varnish 1 jar;
• Water;
• A tube of PVA glue;
• sodium tetraborate.

Progress:

1. Glue is combined with varnish in a container.
2. Are mixed.
3. Gradually add water 1x1.
4. Tetraborate is introduced.
5. Mixing does not stop until a homogeneous mass is formed.

From PVA glue and stick glue

Glue pencil with PVA glue are very similar in structure. The difference is only in consistency, form. If there is no PVA, but there is a glue stick, then this is no worse. It is necessary to have:

• Glue stick;
• Food or other dye - 1-2 drops;
• Bora.

Progress:

1. Glue stick comes out of the tube.
2. It is placed in a bowl in the microwave until it is melted.
3. You can add coloring matter.
4. In a glass, water is mixed with sodium tetraborate.
5. Gradually stirring, an aqueous solution is introduced.
6. If the slime does not work due to the fact that the mass is very liquid, then you need to add tetraborate.

Edible slime variant

In order to create an edible slime you will need:

• Packaging of chewing sweets (Fruttella or Mamba);
• powdered sugar;
• Water bath containers.

Cooking process:

1. Sweets are folded into a container and placed in a water bath.
2. Until they are completely melted, stirring all the time.
3. The slightly cooled mixture is transferred to a bowl with powdered sugar.
4. The mixture falls into it, kneads well.
5. You need to knead until the mass does not easily come off your hands.
6. Even a small child can play with it.

From baking soda

Slime made according to this recipe is not safe for small children due to the fact that it contains dish detergent. You can play with such a toy only under the supervision of an adult. Be sure to wash your hands after playing with it.

• Dishwashing liquid;
• Soda;
• Water;
• Dye.

Step by step action:

1. The liquid dish detergent is poured into a suitable container.
2. Soda gradually falls asleep and mixes.
3. If the consistency is very thick, add water and mix.
4. You can add dye.

Making a Magnetic Slime

In order to be original, you can make a slime that will respond to the influence of a magnet, that is, a magnetic slime.

Required:

• Bora;
• Water;
• Glue;
• Iron oxide or metal filings;
• Magnet.

The process itself goes like this:

1. 0.5 teaspoon of boron is poured into a glass of water.
2. Stir until completely dissolved. This will act as an activator.
3. In another bowl, pour 0.5 cups of water with 30 g of glue.
4. Mix until smooth.
5. You can add dye, paint. In order for the slime to glow in the dark, you can add phosphor paint.
6. The activator solution from the first glass is added to the resulting mixture in a small stream.
7. Pour in gradually, stirring all the time.
8. If the mixture begins to acquire the desired consistency, it is worth stopping the addition of the activator to harden.
9. Slime is ready.
10. The slime must be removed from the bowl, leveled on the plane of the table.
11. Iron oxide should be poured into its middle.
12. Mix everything thoroughly until the color is uniform.
13. The magnetic slime is done. You can check its interaction with the magnet by bringing it up, moving the magnet away from the slime mass. The mass should follow the magnet.

Creating a sparkling look

• Hot water - about 5 l;
• Polyvinyl alcohol powder - 1 tbsp. spoon;
• Borax - 0.5 tsp;
• Sequins (glitter) - 1 teaspoon.

Course of action:

1. Pour 0.5 liters of hot water into a bowl.
2. Add polyvinyl alcohol powder.
3. Pour boron into another container and pour hot water until dissolved.
4. The contents of the containers are whipped and combined.
5. In order for the slime to sparkle, you need to add sparkles, mix well.
6. All is ready.

From hand cream

Only two ingredients are needed, the proportions of which must be selected experimentally. It might look like plasticine.

• Hand cream can be of several types;
• Flour.

Description of the method:

1. Flour is mixed with cream.
2. Stir until completely curdled.
3. In the process, you can add cream.

From sodium tetraborate and glue

The fastest way

• PVA glue;
• tetraborate;
• Green solution.

Creation process:

1. A tube of glue is poured into the container.
2. A drop of greenery drips.
3. Mixed.
4. A little tetraborate is added.
5. Mixed.
6. If the density is not enough, you can still add tetraborate.
7. It is mixed or kneaded in a plastic bag until it can be easily removed from the bag.

Without sodium tetraborate

One of the most successful, as well as simple methods.

Ingredients:

• PVA glue - 1 tube;
• Capsule of two-component or three-component washing gel - 2 pieces.

The manufacturing process consists of 3 stages:

1. Pour the glue into the container from the blender.
2. Pour the gel from the capsules there.
3. Beat well.
4. Leave to infuse for 15 minutes.
5. You can take it out and play.

Without PVA glue

One such way is with the use of toothpaste.

• Toothpaste;
• Salt;
• Shampoo;
• sodium tetraborate.

Work plan:

1. Mix the paste, shampoo and some salt.
2. Mix.
3. Add sodium tetraborate drop by drop, stirring several times.
4. Cool down.

starch free

Two of the many ways to make slime without starch.

1 way

Items needed:

• Water;
• Guar gum;
• Baking soda;
• Solution for lenses;
• Dye.

Sequencing:

1. Guar gum is sifted into the poured water through a sieve.
2. Everything is stirred. The size of the slime depends on the amount of water.
3. Strain the resulting liquid through a sieve over another container, no lumps are allowed.
4. The liquid is colored with a dye.
5. Add lens fluid about 2 tablespoons.
6. Soda is added about 2-3 tablespoons.
7. Everything is mixed for about 5-7 minutes.
8. You can play.

2 way

Required:

• 1 glass of flour;
• 2 glasses of water.

Sequencing:

1. Water and flour are mixed.
2. The mass is divided into 3 parts, each of which is painted with its own color.
3. It is necessary to warm up in one of the ways: in the microwave for a minute at medium power; in a frying pan with constant stirring over medium heat; in the oven 15 min 160 .
4. After cooling, the slime begins to lose its viscous qualities.

Without water

Required:

• Jelly shower gel;
• Dye;
• Flour.

Actions:

1. A dye is added to the gel, flour is gradually introduced.
2. If thickening does not occur, then it is worth adding flour.
3. Good thorough mixing is essential.

From toothpaste

Also, the method is not complicated, but the proportions must be selected by experimenting.

1 way

Ingredient composition includes:

• Gel toothpaste 1 tube;
• Glue 1 tube;
• Perfume composition (optional).

Stages of creation:

1. Squeeze the paste into a container.
2. Mix well to add glue.
3. Knead until the desired consistency is formed.
4. To remove the smell of the paste, you need to add a drop of perfume composition.

2 way

• Toothpaste - 100 g;
• Polymer glue - 40 g.

Progress:

1. Mix paste and glue.
2. Mix well, even beat until bubbles form.

From sugar

A recipe in which you need to experiment with proportions.

• Sugar or powdered sugar - from 1 tsp;
• Liquid soap;
• Shampoo.

Creation method:

1. Shampoo and soap are mixed in equal amounts.
2. Sugar is added, and powdered sugar is better (due to a lack of powdered sugar, it can be very liquid).
3. Mixed.
4. Left for 2 hours.
5. For 30 minutes in the freezer.

A very easy way to make glass slime

You need very simple ingredients such as:

• Cold water 1 glass;
• Borax spoon;
• Stationery glue (silicate).

Procedure:

1. Borax is added to the water and mixed until completely dissolved.
2. Glue is gradually introduced into the resulting liquid.
3. Mixed.
4. Let it brew.

Air slime option

Another such slime is called as FLAFFI slime.

It is prepared from:

• Shaving foam;
• silicate glue;
• liquid soap;
• sunflower oil;
• sodium tetraborate;
• Dye and glitter (if desired).

In the following way:

1. Shaving foam is added to the glue.
2. Mixed.
3. Soap, oil, 0.5 tablespoons of boron are added to the resulting mass.
4. Mixed.
5. Knead by hand until fully cooked.

How to make from boric acid

Since the cost of boric acid is not high, the recipe is quite budgetary.

• Boric acid;
• Dye;
• PVA glue.

Process of creation:

1. The amount of glue poured will determine the size of the future slime.
2. Coloring agent is added and stirred.
3. Boric acid is added dropwise while stirring.
4. For a better distribution of all components, the slime is washed by hand.

What to do if the slime does not work

There are times when self-preparation of slime does not give the desired result. It is important to understand that the following factors influence the final result:

• The quality of the materials used;
• Compliance with proportions;
• Step by step action.

If the slime turned out, then its mass will be homogeneous, uniform and easily accessible from the container.

If the slime turned out to be not homogeneous, then it is possible to save it by continuing to actively knead further until it acquires the desired ductility, uniformity.

If the slime is very sticky and stretches for a spoon like cobwebs, then you can try adding a little liquid starch or water, depending on the recipe. This will thin out the consistency.

But if there is ductility, but the slime simply slides off the hands without sticking to them, then it means there is an excess liquid content in it. In order to get rid of it, it is necessary to drain these excesses, but you can add the binder required by the recipe (glue, boron solution, flour). Mix everything well again.

How to keep the slime longer or proper slime care.

So what does proper slime care include?

To do this, you need to get:

• nutrition;
• house;
• bath;
• give him a place to play with him;
• place in the refrigerator.

Meals include two basic salt, water, and an additional component of eraser pieces (optional).

The daily diet is from 1 to 5 pinches of salt. It is required to slightly cover the bottom of the jar with water during storage. After that, everything needs to be well closed, shaken. You can add eraser pieces.

The slime house is a tightly closed jar.

The slime can become pregnant, it will look like the appearance of small bubbles all over the slime. If this happens, then it is worth putting the slime in a jar and leaving it for 4 days. After this time, check if a small colored spot appears, it means that the baby is “born”. It must be separated by placing it in another jar.

Bathing is necessary for this, in a bowl with a small amount of water, you should wash the slime, after which it must be removed to the house.

Frequent games are not desirable, because due to its structure, it absorbs all the dirt and dust surrounding it. And this reduces its size.

Guys, we put our soul into the site. Thanks for that
for discovering this beauty. Thanks for the inspiration and goosebumps.
Join us at Facebook And In contact with

Girls are the treasure of our world. Therefore, they try to look and behave accordingly. But you must admit that always being on top is not an easy task.

That's why website collected cool tricks that can make life easier for every representative of the weaker sex.

18. Lemon and honey

17. Pencil and lip balm

A very hard eyeliner can be dipped in a little lip balm. This will soften the lead and make it easier to use the pencil.

16. Hashtag and smoky eyes

To quickly and easily make smoky eyes, draw a lattice on the outer corner and gently blend it with a brush or sponge. For darker eyelid makeup, repeat the action several times.

15. A jar of antiperspirant and oil

A jar of roll-on deodorant, after washing, can be used as a massager. You just need to apply a few drops of oil on your face and distribute it with a ball. Cool massage and tightened skin are guaranteed.

14. Suspenders and jeans

Suspenders and jeans are a classic pair. But together they can also work in a very unusual way. If the jeans are wide at the waist, attach the suspenders to the back of the belt loops - and you will get a perfectly fitting jeans.

13. Hand cream and apple cider vinegar

If a regular hand cream does not provide the desired moisture, then you can add a couple of drops of apple cider vinegar to it. Moisturizing your hands with such a cream, after a week you will not recognize your skin, it will be so soft.

12. Tape or band-aid and toes

While walking in heels, strong pressure is created on the foot and the nerve located between the middle and ring fingers. Connect these two fingers together with a band-aid and enjoy long walks in high heels.

11. Shaving foam and sugar

A great homemade facial scrub can be made with shaving foam and sugar. This simple combination will not cause irritation, but will make the skin tender and soft.

10. Colored nail polish stains

Dark and bright nail polishes, after rinsing off, most often leave pigment on the nails. For a complete cleaning, you need to mix hot water, hydrogen peroxide and soda and hold your nails in this solution.

9. Liner and lens solution

To revitalize dry eyeliner, add a couple of drops of special lens solution to it.

8. Sequins and foil

To give your lips a little volume, just use regular toothpaste. The paste must be distributed on the lips and, after waiting a bit, rinse.

If a man lives in the house, then a whole mountain of accessories automatically comes with him. Cooler than the toy Ken from childhood. Among the "accessories" there will certainly be shaving foam. Even if the faithful / brother / son is a fashionable bearded man. It turns out that this hygiene product, in addition to the main one (to pacify facial hair and not only), has at least 10 additional and completely unexpected functions. Details are below.

Through trial and experiment, it turned out that the usual shaving foam is a very useful thing in the household. After all, with its help you can not only get rid of the bristles, but also put things in order in the whole house. For example:

1. Clean the carpet from stains

Treat the stain with foam, walk on top with a damp sponge and leave to dry naturally. Vacuum after a few hours, removing the remnants of the dried foam, and rejoice at the clean carpet again.

2. Clean and polish stainless steel surfaces

A layer of shaving foam and a dry sponge will return the presentation to both old pans and your favorite refrigerator.

3. Keep the bathroom mirror from fogging up

Treat the surface with foam, wait half a minute and wipe dry. The product forms a thin water-repellent film, which will not allow the glass surface to fog up under the influence of steam. The trick will also work with shower doors, glasses, windows, and other glass/mirror objects.

4. Remove traces of careless manicure from the skin

Often, trying to restore beauty in a hurry, girls accidentally smear varnish everywhere (except for the nails themselves). A small amount of shaving cream will solve this problem. Sprinkle the errors and rub a little. The lacquer will peel off the skin, but will remain "sit" on the nails.

5. Clean your jewelry

The composition of the shaving foam is not aggressive, does not contain harsh abrasive particles, but is full of cleansing components. This makes her an excellent candidate for delicate work such as cleaning jewelry. The recipe is the same: add a small amount of foam, wipe, dry naturally.

6. Clean stains on the stove or oven without scratching

The explanation is a combination of points 2 and 5. And, yes, you can safely arm yourself with a metal brush for dishes.

7. Mute a creaking door

Try lubricating the loops with shaving foam. Perhaps this will not eliminate the problem forever and completely, but it will give you at least a couple of evenings in silence.

8. Soothe skin after sunburn

The secret is in the softening ingredients and the cooling effect. It will also help relieve itching from insect bites.

9. Make paint for children that can be safely painted on windows and furniture

Just add some food coloring to the foam. Kids will be delighted with permissiveness, and you can easily eliminate the consequences of children's creativity with the help of an ordinary wet sponge.

10. Going on a hike? Take a small bottle of shaving foam with you

After all, with its help you can wash the camping pot to a shine, grease from your hands and soothe the skin after contact with the sun's rays and obsessive insects.

In addition to shaving foam, another household assistant with high efficiency is the usual one.

For many men, foam is the usual shaving agent, but what if the product runs out at the right time and you need to safely remove the stubble? Indeed, only thanks to shaving foam, a man can easily and easily remove excess facial hair and not damage the integrity of the facial skin. Experts advise using folk recipes and making foam yourself.

Few men know how to make shaving foam and what is even possible. In fact, the experience of previous generations shows that even a few improvised means can be used to make such a shaving product at home. It can be ordinary soap, solid oils and a soap base, to which various useful components are added.

In fact, shaving foam with your own hands is quite real, and any man can cope with such a task. Moreover, alternative means are in no way worse than foam, if properly prepared according to the recipe and used immediately for its intended purpose.

To prepare homemade foam for safe, gliding and gentle stubble removal, you can use:

• toilet or simple laundry soap;
• solid vegetable oils;
• soap base and additional components to it.

The first version of the soap-based foam is ideal for men with normal and oily skin types, as the alkalis in the soap remove fat and disinfect the epidermis. The soap base can be supplemented with plant extracts, moisturizing ingredients and essential oils, making it ideal for sensitive skin. And on an oil basis, it turns out more like a shaving cream that will moisturize and soften dry skin type.

Important! Do-it-yourself shaving foam should be used immediately after preparation, as it will whip and after some time the effect of the foam may be lost.

Recipes for home cooking

Many men have long known how to whip shaving foam from soap, when shaving cosmetics were not invented. Having no alternative, all the men foamed a simple soap and applied such a product to the skin of the face with a brush, after which they removed the stubble with a straight razor.

Soap

Today, to prepare an alternative foam from soap, you will need to use the following improvised means:

• toilet or laundry soap;
• shaving brush;
• water temperature of about 50 degrees;
• ceramic bowl.

To whip soap to a state of foam, experts advise choosing a shaving brush from badger hair. First, you need to dip the shaving brush in warm water and leave it there for a few minutes to steam out the villi. Next, the brush must be shaken off the rest of the water, and then rubbed over the surface of the soap until foam appears. The resulting foam must be quickly transferred to a bowl until the desired amount is collected in it.

Using warm water, you can adjust the density of the foam, adding a few drops as needed. After that, the foam is immediately applied to the skin of the face with a brush, if necessary, the foam can be constantly whipped with a brush. It is imperative to shave with a machine with sharp blades, as you can damage the skin and bristle hairs. After the procedure, it will be enough to wash with cool water and apply a moisturizer after shaving.

From soap bases

The soap base is sold in any pharmacy or specialized stores, it is used by people who independently prepare natural products for hygiene procedures. In creating shaving foam from such a base, you can also turn on fantasy and add various valuable components. For example:

• glycerol;
• oils (peach, almond, coconut, grape seed, citrus, shea, jojoba, wheat grains);
• decoctions on herbs;
• essential oils.

In addition, you will need dishes for preparing the product on a steam bath, a grater and a container for the finished product. On a grater, you need to grate a piece of soap or cut the soap base into pieces, heat it in a steam bath and pour in about 100 ml of herbal decoction. The product is stirred until the soap melts, you can add a little sea salt to speed up the absorption of soap and rejuvenate the skin of the face with salt minerals.

Half a teaspoon of vegetable oil, glycerin are added to the product, vitamin E and a couple of drops of essential oil for aroma can be added (but ether is added to the cooled product). Using a mixer or a simple whisk, the finished soap should be whipped until foam forms. After that, the agent is poured into the finished container and can be used for its intended purpose.

From solid oils

You need to choose your own shaving oil, taking into account personal preferences and skin response characteristics. Experts advise choosing from the following options for solid oils:

• Shea Butter;
• coconut;
• pistachio;
• cacao butter;
• almond oil;
• mango butter.

In addition, you will need a container, a couple of drops of any essential oil and water. You can mix several oils in equal proportions, melt them in a water bath to a liquid state, add a little olive oil or vitamin E and mix well. Add esters to the cooled product and beat with a whisk or mixer. After that, the self-prepared foam cream can be used for shaving.

For reference! All of the above recipes, how you can make your own shaving foam, are in demand among men all over the world, they protect the skin from injury, nourish and moisturize, taking into account the needs of the skin.

Important nuances in cooking

Before using the prepared product, you need to test it for an allergic reaction. To do this, a small amount of homemade foam should be applied to the skin of the wrist or on the bend of the elbow, and then check if redness appears on the skin. If the skin does not respond, this alternative foam can be used to remove excess facial hair.

The choice of recipe by skin type is as follows:

• dry skin - foam from solid vegetable oils;
• normal and oily skin - foam from laundry or toilet soap;
• sensitive skin - natural soap base foam.

Brushes for applying foam to the face are best used from natural materials. For sensitive and dry skin, liquid glycerin and vitamin E must be added to the composition of the homemade product to ensure the machine slides, nourishes and moisturizes the skin after such a procedure. Any prepared shaving foam should be used once, and fresh foam is prepared for the next procedure.

Conclusion

Do-it-yourself shaving foam is ideal for those men who have an allergic reaction to most cosmetics. You can prepare foam from solid vegetable oils (cream foam will turn out), from a soap base (an alternative to shaving gel), as well as from simple toilet or laundry soap. In creating foam at home, you can give free rein to creative impulses and fantasies by adding any other valuable substances and components to cooking recipes.