Which side is better to glue the wallpaper. How to glue wallpaper. Features of gluing different types of wallpaper

Before proceeding to the final stage finishing works performed using non-woven, paper or vinyl sheets, you should clarify where to start gluing the wallpaper in the room, kitchen, bedroom, corridor. For each of the listed premises, there are a number of features associated with lighting or the presence of door and window openings. Therefore, when figuring out where to start gluing wallpaper, you should clarify in which particular room the finishing work is to be carried out.

Rules for gluing in the room

Paste the wallpaper in the room in strict accordance with all existing rules and requirements, after the material intended for creation is selected finish coat. The most common today are canvases on non-woven or vinyl. When deciding where to start gluing, you should pay attention to the rules for working with such a canvas:

You can start gluing wallpaper in a room from any major landmark, such as a corner, window or door. The selection is based on measurements taken previously. It is important to determine the maximum and minimum height of the walls and start from the data obtained in choosing the place for gluing the first canvas.
Beginning craftsmen should be aware that the feature of the non-woven wallpaper is its thickness. Such canvases need to be glued to the walls in a joint. The slightest overlap of one canvas on another is unacceptable.
Wallpapering in a room can be started from the far corner opposite the front door. In this embodiment, the gaze will not fall on the joint, but on a flat smooth surface whole wallpaper sheet.
When deciding where to start gluing wallpaper in a living room, you should pay attention to the presence of large objects in the room that attract the attention of others. Such a landmark can be the starting point for starting work related to wallpapering.
If the room has access to a balcony or loggia, and the distance from the boat to the nearest inner corner is very small, then when deciding where to start, you can choose the far corner as a guide.

Perfectly even corners in modern residential premises are extremely rare, therefore, there is a strict rule to maintain verticality throughout the pasting area. Wallpapering on the walls of the room is carried out after marking the vertical on each wall.

Another question that beginners often ask is, more precisely, from which side of the room to start work. The answer may be the statement experienced craftsmen who say that if there is no need to glue the wallpaper on the overlapping walls, you can start working from the doorway and move clockwise, that is, glue the canvases from left to right.

A feature of performing work in a residential area is the ability to make any decision, choosing where to start gluing wallpaper correctly. To create the most quality coverage it is important to remember to follow the rules when docking.

In this case, even the rays of light will not make the joints of the canvases visible, and the wall surface will look like a solid canvas.

The order of work in the corridor

When figuring out, it is important to clarify what kind of room we are talking about. The fact is that such a part of the apartment as a corridor or hallway differs from the rest of the rooms in the absence of window openings. Here decoration can serve arched structure or there may be several doorways. Gluing wallpaper in the corridor starts from the far inner corner.

This work can be done quite quickly and easily if the corners are absolutely even, otherwise the procedure for performing manipulations related to wallpapering will be as follows:

On the wall opposite the front door, make a mark, marking the vertical. To do this, use the building level with a spirit level. From the corner you need to retreat at least 10 cm
Each new leaf wallpaper should be glued so that its edge goes to the adjacent wall, where the vertical is also marked.
To ensure high-quality docking, you can use a plumb line.
with complex geometry are glued using a new vertical for each next canvas.

Before gluing wallpaper on the walls in the corridor, you need to prepare the adhesive base. It could be special composition, which is applied directly to the walls over the mark made.

A dry sheet of wallpaper is applied to the wall surface so that its edge exactly matches the mark.

Lightly pressing this edge, iron the middle of the sheet with a plastic spatula, then proceed to smoothing, directing the movements of the spatula from the middle in different directions, as if drawing a Christmas tree.

Beginners prefer to apply adhesive composition not only on the walls, but also on the canvas itself, which in many situations only complicates the work. You need to follow the instructions exactly to get it. quality surface and complete bonding.

Works in the kitchen

The complexity of performing work related to, lies in the features of the room itself. Here you need to consider:

the need for installation and installation of household appliances;
leave room to create kitchen apron from tiles;
take into account the location of the window and door;
take into account the peculiarity of the passage area and recreation areas.

In most cases, choosing which wallpaper in the kitchen is better and easier to stick on the walls, consumers stop at canvases for painting. Their advantage lies not only in the ability to change the color of the coating if desired, but also in the considerable width of the roll.

The procedure for performing work is not much different from sticking wallpaper on walls in other rooms. It is only important to make sure that the bonding is of high quality, since here the wall covering will be subject to negative impact temperature changes and humidity changes.

The gluing process has certain distinctive features. For high-quality fixation of the canvases on the walls, you need to apply the adhesive on the wrong side of the wallpaper sheet, wrap the edges towards the middle, and then fold it in half again. Now you need to wait until the glue begins to soak into the wallpaper and you can start gluing.

The first sheet is placed in accordance with the mark made, placing the edge strictly vertically. You need to smooth it with a rubber roller or a plastic spatula. You can study the process of wallpapering in detail by watching the video.

The performance of works on gluing wallpaper on the walls of any room in strict accordance with the instructions guarantees high level the quality of the finished coating.

For wall decoration, it is not enough to choose high-quality wallpaper and good glue. If the room is pasted over with crooked paper strips, then the repair will look sloppy. The same applies to joints or thickenings that clearly show under the light if the tapestries are overlapped. Where to start wallpapering? There are several ways to start, and they all take into account the evenness and placement of doors, windows, and other elements.

Why you need to choose a starting point

The first strip of wallpaper should be glued as evenly as possible. All other pieces of the roll will be attached to the wall relative to the first, in a circle. If it was mounted unevenly, then at the end the joints will not converge, and you will have to redo everything. That is why it is so important to find the perfect vertical line as a guide.

In the Soviet Union, wallpaper was glued only from the window, and this is due to several reasons. Firstly, there was not such a diverse choice of materials and textures. The wallpaper was paper, thin, and easily overlapped. This made it possible to hide ugly thickenings. Secondly, the window line in Soviet apartments was often smoother than the door, and even more so the corner.

Now the structure of the wallpaper allows you to stick them more accurately - end-to-end. Therefore, it is permissible to start from almost anywhere. The main thing is that the vertical reference line is even, then the first and last sheets will converge. The coincidence of verticals will be especially noticeable on wallpaper with a geometric pattern.

Which side to start: all options

It all depends on the characteristics of the room. Somewhere the line of the window is more even, somewhere - the door. In some rooms, it’s even worth pushing off from the center of the wall or from the corner.

Where to start gluing wallpaper in the room, all possible options.

Let's start from the window

The most popular way. But he is chosen not only because of many years of stereotypes. Moving from the window is really convenient. How to decide whether to glue wallpaper from the window or to the window? If the canvas is wide, then it is likely that in the case of starting from the door, when approaching the window, the entire layer will not fit. You will have to cut the roll lengthwise.

Sometimes wallpaper is glued on both sides of the window. In this case, the joint is located under the window and covered with curtains. You can act similarly from the door, placing the joint over the opening.

When pasting from a window, it is easier to avoid the problem when you need to match the sheets according to the drawing. It is especially difficult to do this under the windowsill and above the window. You have to cut and match a lot. Complicate the work of heating radiators, which are often placed under the window.

The door as a guide

Modern doors are installed as evenly as possible, so it is more than acceptable to start wallpaper installation from them. The main convenience of the method is that the first and last canvas do not have to be compared, since there will be a doorway between them. it good way for wallpaper with a bright print, because the pattern may not converge at the end of the installation.

In what cases will the angle help

Gluing wallpaper from the corner is not the most popular way. In order for the installation to be successful, the corners must be as even as possible, but this a rare event. At the same time, this method is allowed if there is no window in the room, or the doorway is too crooked.

It will be right to start from the corner if the design of the room provides for several types of wallpaper. For example, opposite walls are covered in the same way. In this case, to avoid the accumulation of joints at the corner, you should start right from it.

The evenness of the landmark can be checked with special construction tools. Even if the vertical line visually looks straight, do not neglect the additional check. Carelessness will cost you nerves, time and additional materials. The building level is the simplest tool, the longer it is, the more convenient it is to measure walls. Vertical lines are also drawn with a plumb line. The most expensive device laser level, but it gives the most accurate result.

These tips will help you decide where to start:

If indoors a large number of large objects - arches, windows, openings, then you need to start from the largest of them.
If the wallpaper has a very pronounced print, then in order to avoid an uneven joint, it is hidden in an inconspicuous place. That is, you need to start from where the discrepancy will not be visible. It's good if there is a tall piece of furniture, but consider if a rearrangement is planned.
To make the joints invisible to the eye, they are made above the windows or doorways, under the batteries, behind the kitchen set.
Measure the walls, determine their maximum and minimum heights: in some cases this helps to find a reference point. You should not immediately cut the roll into identical pieces so that you do not have to correct the work by gluing the missing centimeters from above and below.
Pay attention to the lighting of the room where the window is located, how the wall lamps shine. Well, if the joints are not placed in the most visible place.
It is better to start from the far corner, then when you enter the room, your eyes will fall on a flat canvas, and not on the joint.
Vinyl, non-woven and glass wallpaper cannot be overlapped, this must be taken into account. In extreme cases, it is better to cut off a few centimeters than to make a convex connection that will spoil the view.
If the distance between the exit to the balcony and the nearest corner is very small, then it is better to start from there.
If the wallpaper is overlapped, then professionals recommend moving from left to right. In this manner .
Tapestries in the corridor begin to be glued from the far inner corner.
In the kitchen, do not forget to leave room for a kitchen apron.

What else to consider

When gluing, you need to take into account not only the location of doors and windows, but also other elements:

see how sockets and switches are located;
where important pieces of furniture and other interior details are located;
location of windows relative to each other;
where is the balcony?
placement of batteries, pipes;
how do the door and adjacent corners relate;
the width of the wallpaper sheet also plays a role.

These nuances will help to accurately determine the starting point of work.

Advice! Before starting work, de-energize the room, remove the covers from the sockets and glue the wallpaper on top. After drying, you only need to cut holes and install sockets. This will turn out much neater than cutting the wallpaper along the line of the covers.

What to do if the corners are uneven

Rough corners are a real puzzle for those who glue new wallpaper. It is especially problematic to make a print finish, since the pattern will not converge due to unevenness, verticality will be lost. Folk wisdom has found a way out of this situation:

For each new wall a new reference point is selected.
At the junction, each canvas should go onto the adjacent wall by about 10 cm.
A vertical line is drawn on the entry bar. It should be flat, not parallel to the corner.
The next wall is pasted over from the drawn strip. The method works, but only for thin wallpaper that can be glued on. For heavy non-woven and vinyl samples, this option is not suitable. In this case, you will have to work with a sharp clerical knife to match the pattern.

In such a case as wallpapering walls, the saying is appropriate: measure seven times, cut once. In case of an error, all joints will be evident. It is necessary to take into account all the details, the location of key interior items, the evenness of the corners and much more so that the repair is completed successfully.

For those who decide to paste the wallpaper on their own, several questions immediately arise: how to start gluing the wallpaper, when you can open the windows after gluing, first lay the laminate, and then glue the wallpaper, or vice versa? After all, you really want to glue the wallpaper perfectly so that they are even and without bubbles. How to properly prepare the walls and glue the wallpaper? Answers to the most popular wallpapering questions and some repair tips can be found in this article.

After choosing and buying wallpaper, you need to prepare the walls. First you need to remove the old wallpaper. If high-quality glue was used during their installation, the work will take longer. Wallpaper can be wetted before use, you can also use a spatula or knife.

After removing the wallpaper, you must remove the old plaster. It is possible that from some places it will fall off by itself.

All holes must be filled and primed. Must be primed uneven walls, otherwise the wallpaper will dry unevenly, bubbles will form, the wallpaper may even fall off and not stick at all.

In general, the whole preparatory stage is to level the surface. The end result should be clean and flat wall that can be wallpapered. All holes, debris, dirt must be removed. After the walls are completely dry, you can start wallpapering. To do this, you need to dilute the glue, make markings and begin to carefully glue the material. Spread the glue evenly using brushes or a roller.

When can you open windows after wallpapering and why

While wallpapering, close all windows and doors so that there are no drafts.

After the wallpaper is pasted, do not open windows and doors for 48 hours.

The draft is the most great danger for newly pasted wallpapers. Due to temperature differences and drafts, the wallpaper falls off, so best solution will make repairs in the summer, in the warm season, the wallpaper will dry faster without bubbles.

During and after wallpapering, windows must be closed and left in this position. If you open windows, then the wallpaper will dry unevenly, somewhere the wallpaper will already dry, and somewhere it will remain damp. This difference in drying leads to skew of the material. You need to open the windows after the material has completely dried, it takes at least a day, but the time depends on some factors: temperature, air humidity. If the wallpaper is glued in the cold season, then it is better to wait two days after gluing and in no case open windows that will lead to a temperature difference.

The process of drying the wallpaper should be slow and even, while the wallpaper is drying, do not use an air conditioner, fan or heater. In addition to windows, doors must also be closed, after the wallpaper is pasted, windows and doors must be tightly closed, do not enter the room for 1-2 days.

About where to start gluing wallpaper in a room

Where to start wallpapering? It depends on the method of gluing and on the thickness of the wallpaper.

Currently the market building materials offers customers a huge range of different wallpapers:

Paper wallpaper;
Vinyl wallpapers;
Non-woven wallpaper.

Wallpaper means the seams between the canvases during gluing. This means that you can start gluing wallpaper from anywhere in the room. However, many have retained the habit of starting to glue wallpaper from the window, because it is convenient.

Often the window is also used as a vertical line, which allows you to achieve smooth lines.

A door or a corner of a room can be considered the same straight line. By the way, more and more often, professionals advise taking the corner of the room as the beginning of gluing, but, unfortunately, not all rooms have even corners. If you want to save money on aligning the corners, then you should start gluing the wallpaper from a vertical line drawn on the wall using a level approaching the corner. All the same, it is necessary to check the vertical so that the corner does not “move out”. The joints will be striking due to the thickness of the wallpaper, so you can start gluing the material, in principle, from any part of the room.

Paper wallpapers remain quite in demand. Moreover, the price for them is the lowest. But how to glue them correctly so that the result pleases? A few tips for you:

How to glue wallpaper: from the window or to the window

Previously, it was very important to choose the right direction during wallpapering. Thick wallpapers covered each other and cast a shadow at the junction, so people glued the wallpaper away from the window so that the light fell on the edge of the top sheet and did not create a shadow. In the opposite situation, if you glued the wallpaper towards the window, then the top sheet cast a shadow and wide floors were visible.

When gluing wallpaper with an overlap, you need to start from the light source. When gluing wallpaper end-to-end, you need to start gluing from the least noticeable place in the room.

In the latter version, the joints will be less noticeable, but at the same time, at the end there may be too much piece of wallpaper that will have to be cut off, and the pattern may not match the rest of the room. Therefore, it is better to start and finish gluing wallpaper in an inconspicuous place, such as behind a wall or other furniture.

If you start to glue the wallpaper from the corner, then you need to devote a lot of time to the correct docking of the wallpaper. If the wallpaper is glued with your own hands, then it is better to step back a few centimeters from the corner and start gluing the wallpaper.

Professionals work differently, some first glue the wallpaper, and then lay the laminate and vice versa. If the repair is carried out independently, then professionals advise first to install what leaves behind a large amount of debris.

If you first glue the wallpaper, and then lay the laminate, then:

During wallpapering, various debris can ruin the laminate, so you need to prepare the floors in advance, and then glue the wallpaper.
Some types of laminate are sensitive to wallpaper paste, so the coating may deteriorate after the wallpaper has been pasted.
Before wallpapering, the laminate must be covered with a special film to prevent damage to the coating. It should be remembered that the film can move out due to any furniture, so you need to carefully monitor the safety of the coating.

Experts say that the first step is to glue the wallpaper, and then lay the linoleum.

In this case, the sequence of work should be as follows:

The surface on which the wallpaper will be glued is being prepared.
Marking is done, glue is diluted, wallpaper is tried on.
Wallpaper is glued from the required side.
After the wallpaper has dried, it is necessary to proceed with the installation of the laminate, and then attach the baseboard.

Nevertheless, it is precisely this sequence that is the best, in which case a perfectly even coating of both wallpaper and floor is created. However, it is necessary to take into account various circumstances during the repair work, so the owners themselves must look at the situation and make a decision.

Wallpapering on the wall (video)

In conclusion, it should be noted that you can stick wallpaper on your own, you just need to follow some rules, choose the right materials and carefully perform repair work. After wallpapering, do not open windows and doors to prevent drafts and temperature changes that will affect the final quality of the wallpaper. Glue first laminate or wallpaper? The choice depends on the circumstances, but it is better to paste the wallpaper first. In any case, everything must be done slowly and carefully, then the wallpaper will not bubble and will last a long time.

And you should not treat this problem with condescension - to the choice of a place for sticking the first roll of wallpaper. It is from him that the whole dance will begin: Captain Vrungel used to say - as you call the ship, so it will float. And we will say - how correctly the choice of the place will be made, from where to start gluing wallpaper on a non-woven base, this will be the result of all the work.

The price of this choice is very high, sometimes it is so high that it will even force you to redo the whole thing.

A problem that does not pass by anyone

To begin with, we will decide what needs to be considered in this choice.

What do we consider

The first is the location of all the elements of the room:

the position of the door relative to adjacent internal corners and the ceiling;
the same three points of the window, and everything is much more complicated if there are two windows or there is an exit to the balcony;
position of sockets and switches;
the position of the battery and pipes of the heating system.

The second is what is often forgotten, perhaps because it requires a more subtle calculation:

furniture arrangement and
placement of additional interior elements.

Useful advice!
Of course, everyone has their own ideas about saving, but we advise you to pay attention to this nuance.
You are going to put a closet in the room, a wall, make a wardrobe enclosure that will cover the entire wall from floor to ceiling, from the left corner of the wall to the right.
So why glue wallpaper here, and even puzzle over how it is more convenient to do it at the corners.
Isn't it easier to refuse wallpaper on this wall.
This wall, as a rule, is large, in any case not with front door and a window, so the total wallpaper savings will be at least 40%, which is very decent.

Third - . kinds of this finishing material quite a lot, but we only consider those that come in rolls.

In other words, we do not take into account:

liquid wallpaper is just a dry mix, and belongs to the noble wallpaper community due to its large cellulose component;
murals - these often are just rectangular fragments of a picture, but even if they are in rolls, then His Majesty, the drawing, dominates here, and all sorts of talk about doors, windows and sockets fade into the background.

The first step is mandatory

Before you start choosing a point or line of the first roll, be sure to align the ideal vertical and best of all mark it with a clearly visible marker.

For this:

we hang the cord and lower it down - we got the perfect vertical, the trace of which remains only to be applied to the wall;
to do this, holding the cord down (C), pull it slightly (A) and release it - it will spring itself to the wall and leave a mark (B).

Basic calculation

Having a reference point in the form of a vertical line, we begin the selection of the first vertical for the first roll.

Very useful diagram

Of course, a lot here will depend on the configuration of the room. But that is why we advise you to create a similar scheme for the vertical placement of rolls.

The initial data for it will be:

room configuration and
the width of the roll, which is usually 53 cm.

Let's try to parse the proposed option for sticking:

the edge of the window is selected as the start; one can even say not as a start, but the idea was adopted that the wallpaper on the left (16) and on the right (1) would go away from the window - and this must be recognized as one of the most successful choices;

while the pieces on top (14 and 15) and bottom (27 and 28) of the window are located exactly along the center line of the window;
pieces for two internal corners x on the wall, the windows are the same and glued with the capture of the corner (usually 3-4 cm)- here you have to accurately cut pieces 2 and 17;
on a large wall we glue already full rolls (3-8) to the next corner; what to do with the 8th piece will become clear as you work;

with the 9th piece we will wait for now and process the door with 10, 11 and 12 pieces in the same way as the rules for window processing- the door is in the center, 10 and 12 are close to the door (although in the example the 11th went beyond its borders, which must be recognized as a completely unjustified mistake, but with such small incidents you need to be prepared, they are difficult to avoid, they are also included in the rules of the game) ;
when 10 and 12 pieces are in place, the situation with both angles is finally cleared up - 9, 13 and 26;
further we are engaged in the principles of centering with a fireplace - 21, 20 and 23;
finally it becomes clear what to do with the remaining sections - 18, 19, 22, 24, 25 and 26- without a certain amount of uncertainty in this matter, it is difficult to manage to the very end.

Rescue tricks

Given the large number of various obstacles on, we advise you to pay attention to the following useful tricks from life:

in order not to suffer in the future with batteries, it is better to stick wallpaper immediately behind them;
the same applies to heating pipes going up and down to neighbors;

do not forget to turn off the electricity before sticking and remove the covers of all switches and sockets - then you can just stick the wallpaper on top, then carefully cut out the holes and close them with covers (here you just need to be more careful with glue, so insert paper squares inside the holes, or something);
do not forget that you have special openwork strips of wallpaper at your disposal, which will allow you to very carefully process the joints at the top near the ceiling (some also process the joints below according to the same principle);
work on outside corners- a constant problem when wallpapering; We advise you to always use plastic corners to the color of the wallpaper, they will not only eliminate inconsistencies between adjacent rolls, but also provide a very good protection the very corner;
on the inner corners, it would be very good to contrive in such a way as to process them with one piece of the roll - in this situation, four points of the beginning of gluing are possible - four inner corners, which will be exactly in the center of the roll; True, such an approach is possible only for sufficiently flexible non-woven wallpaper, more rigid vinyl ones lend themselves to this technique with difficulty.

Tsugunov Anton Valerievich

Reading time: 4 minutes

Wallpaper replacement is an obligatory stage of every second repair in a house or apartment. However, it is not enough to choose suitable material, glue and tools. To get the desired result, you can not just open the roll and get to work. You need to prepare in advance, as well as decide where to start gluing the wallpaper in the room.

Choosing a starting point: why is it so important?

In Soviet times, wallpaper was glued from the window. The canvases were glued with an overlap, because the material was thin. To make the joints invisible, they started working from the window opening. Today, a range of wallpapers from various materials huge - from up to a cork tree. Why is it important to choose appropriate place to start gluing?

Wallpaper indoors are glued in a circle - from point to point. The starting point in this case is the very first canvas. However, if you proceed in this way, in the absence of experience, it is easy to make inaccuracies, and the last piece may not coincide with the first.
The last strip of wallpaper often does not fit entirely, which means that the pattern may not converge. Therefore, it is better to choose a starting point for gluing in an inconspicuous place.

To glue the wallpaper neatly and evenly, you will have to carefully work with the first canvas. If it is glued somehow, the rest of the strips will also lie crooked. You need an even vertical for the first strip of wallpaper, as it will become a guideline when gluing the next strips.

Tools that determine the evenness of the desired landmark:

The building level is a simple and affordable device. The longer it is, the better the performance.
Plumb – suitable for vertical lines.
The laser level is an expensive, but the most accurate and convenient tool.

Where to start wallpapering in a room: options

There are several generally accepted methods for choosing a start point for work:

from the window;
from the doorway;
from the corner;
from a major landmark;
from several lines, for example, on 2 sides of the window.

The choice of working method depends on the characteristics of a particular room.

From the window

The old Soviet method is still being used, and often, despite the ability modern wallpaper create seamless coating. The method is popular because people are used to working this way, and the older generation advises the younger generation to do this.

The second reason: Soviet windows were even, unlike doorways or corners, the curvature of which is sometimes visible to the naked eye. Another plus of this method: the window opening, as a rule, is deformed very weakly and is quite suitable for a guide.

And one more argument in favor of the window opening. When gluing from another point, when it comes to the window, the whole canvas will most likely not fit near the opening and you will have to cut off a strip of the desired width.

In addition, it is usually very difficult to stick wallpaper under the window, since heating radiators are usually located there. If the work starts from the window, these problems can be avoided.

From the door

Currently, builders, as a rule, strictly monitor the verticality of doors and corners. Unfortunate exceptions do occur, though rarely. It is convenient to glue wallpaper from the door for the following reasons:

the first and last strips do not have to be joined together;
in places such as a hallway or hallway, the doorway is often the only suitable landmark.
if there is an unevenness somewhere, the door will close it. This option is optimal when .

It should be noted that even a very even-looking doorway does not hurt to once again check a good building level or plumb.

From the corner

The angle as a guideline is unreliable, as it is rarely perfectly even. Therefore, wallpaper is glued from the corner infrequently, in cases where the room is without windows or when the doorway is very skewed.

Sometimes they work with an angle like this: they do not start directly from it, but recede a distance equal to the width of the roll minus 2–3 cm. They draw a vertical line, which will be the starting point. This approach allows you to smoothly and beautifully join the wallpaper in the corner.

From any major landmark

If there are many doors and windows in the room, big choice work start points. In this case, it is recommended to start from the most voluminous landmark.

From multiple lines

Option for rooms with big window, from which the wallpaper is glued immediately in 2 directions. To make the joints of the strips invisible, they must be placed above the window, then they will be covered with curtains. Instead of a window, you can start gluing on both sides of the doorway.

What else to pay attention to

To avoid additional problems, you need to consider the following points:

The ratio of adjacent corners and doors.
The location of window openings relative to each other, the entrance to the balcony.
Placement of heating elements: pipes, radiators, etc.
Arrangement of furniture items.
The presence of other important interior details.

If the room has a stationary cabinet that is not planned to be moved to another place in the future, you can start gluing from it, so that the junction of the strips is hidden behind it. The same applies to the headset in the kitchen.

How to mark an even vertical on the wall with the help of improvised items

Work order:

We select a rope length from floor to ceiling.
We make a loop at one end, we hang a load at the other.
We rub the cord with chalk or paint.
We hammer a nail under the very ceiling, tie a rope.
We hold the cord by the weight at the bottom, pull it slightly and release it - an even trace of paint remains on the wall.

Maintaining verticality in uneven corners

This is especially important if the wallpaper has a geometric pattern that needs to match. There is a proven way to maintain verticality. When wallpapering each wall, mark a new vertical line using the method described above. In this case, the last strip of wallpaper on one wall will go a few centimeters over the first fragment to the second.