How to make your own cocoon hanging chair. Various models of hanging chairs with their own hands. What hanging chairs can be made with your own hands

Dacha is a place not only for intensive work, but also for have a nice rest, so it's hard to imagine a backyard without a hammock or swing. In garden supply stores today you can find designs for children and adults of various shapes and sizes. If you don't want to spend money, try making your own garden furniture. In this article we will tell you how to make a comfortable hanging chair with your own hands and decorate your backyard. country house or cottages.

Materials:

- metal hoops;
- slings;
- cord;
- centimeter;
- wooden bars.

Master class for making a hanging chair for a summer residence

Master class hanging chair for giving

If you didn't find the hoops different sizes, you can make them yourself from PVC pipes with a cross section of 3.5 cm. Decide on the size of the chair and calculate the length of the pipe using the formula:

L=3.14*d, where L is the length PVC pipes, and d is the diameter of the ring.

For example, if you need to make a hoop with a diameter of 100 cm, you need to measure 100 * 3.14 = 314 cm of the pipe. To connect the ends of the pipe, inserts made of wood or plastic can be used.

It is better to braid the hoops with a polyamide rope 0.4 cm thick, as it is more durable and at the same time soft to the touch. It is better to buy a lot of cord in advance so that it is enough for the whole product, at the rate of 400 cm of cord per 100 cm of the hoop. The winding should be uniform, and to increase its strength, tighten every 10-20 twists.

Now you can start weaving the net using the macrame technique. You can choose any pattern, for example, chess with flat knots or any other. Watch the tension of the rope during weaving, as the beauty of the product depends on it, as well as the strength of the finished cross. The remaining ends can be turned into a fringe that will hang down beautifully.

After the hoops are braided, they can be assembled into a finished structure. Start by braiding them together from one end. To make the back, wooden rods are inserted. It is best to make cuts on the ends of the rods so that they do not slip off.

You can also braid the back with any pattern, while weaving is better to start from above and go down. When the chair is ready, you need to attach the slings and hang the product in a convenient place.

Watch a useful video: Weaving ropes for a chair

Master class chair for giving with a fabric cover

If you are not familiar with the technique of macrame and do not want to do weaving, you can make a chair with a fabric cover. To make it, you will need a hoop with a diameter of 0.9 m, 3.0 meters of durable fabric, metal rings and buckles, braid and slings.

From a piece of fabric, it is necessary to cut out two squares measuring 150 * 150 cm. In order to make a circle, the squares must be folded four times, measured 0.65 m and cut off. At a distance of 40 mm, measure the contour with strokes.

Now you need to outline the cutouts for the lines, so the circle is folded four times and marks are made relative to the bend lines. The first two slings will be located at an angle of 45 degrees, and the second - 30. The slots should be 10 * 15 in size.

To make them on the second circle, connect the parts and make a mark. Two circles need to be sewn on a typewriter along the marked line so that there is a hole for the hoop. From the synthetic winterizer, cut strips 6-8 cm wide and sheathe the hoop.

The cover must be filled with padding polyester and fastened to the hoop. It remains to attach the slings and fix them in one suspension on a metal ring.

Ideas for hanging furniture in the garden

Hanging seats have been popular for a long time. Most often they are made of rattan, as they are highly durable and lightweight.

Semicircular structures are very comfortable for relaxing, while they can be hung on a tree or other support. The form of hanging furniture can be completely different, so each owner of a country house chooses the most suitable options for himself.

In the garden furniture market, you can find hanging furniture made of plastic, wicker, acrylic or rattan, and each has its own advantages and disadvantages.

To make the seat soft, the kit includes decorative pillows or mattresses. There are many options for decorating a corner for relaxation, so you can either make garden furniture yourself or buy ready-made products.

hanging chair can be hung not only on a tree branch, but also in the gazebo. To do this, you will have to build a suspended structure that will withstand not only the furniture itself, but also the weight of a person.

Watch the video: Hanging chairs - romance in the house

The advantage of a handmade chair is that it will fully meet your needs and be in harmony with the overall landscape design.

Now you can in free time It's nice to sway and get satisfaction from outdoor recreation.

Hanging chair - comfortable and unusual garden furniture designed for relaxing outdoor activities. This device appeared in the 50s of the last century and in a short period of time became an integral part of the house, which claims to be a truly comfortable home.

A beautiful "cocoon" can be used as a swing, a place to sleep or meditate. It is noteworthy that a hanging chair for a home or a summer residence is easy to make on your own from improvised means.

Users often search:

Types of hanging chairs

Currently, there are several types of products:

With a rigid framework from a rattan, plastic. The design is covered with a strong fabric. A vine is also used as a base.
With a soft frame (reminiscent of a hammock). The main difference is in the size: the chair is smaller than a hammock, and therefore takes up little space. Such a product adapts to the human body, which means that it is convenient to both sit and lie in it.
Chair-cocoon. hallmark this modification is 75% hidden inner space. This effect is achieved thanks to the wicker walls - macrame. "Cocoon" will appeal to those who love secluded relaxation, hidden from prying eyes.
"Drop" - usually used in the children's room. The chair looks like little house sometimes equipped with doors. Excellent rocking chair for a child.

Self-made hanging chair

Making a comfortable hammock for a comfortable pastime is not as difficult as it might seem at first glance. First you need to prepare the necessary parts:

Metal hoop with a diameter of 90 cm.
A piece of strong fabric 3 m long, 1.5 m wide.
Braid, interlining or dublerin.
An eight-meter line.
Steel ring for mounting the structure to the ceiling.
4 iron buckles.
Sewing supplies, tape measure and scissors.

Let us dwell in more detail on the choice of a hoop. As load-bearing structure you can use the following improvised materials:

Hoops for gymnastics. Aluminum and plastic are not suitable for this purpose, as they will not withstand the load of the body of an adult. You can only consider steel models. The maximum cross section of such a hoop is 16 mm, while for the manufacture of a durable product, 32 mm is needed, which is twice as much (for a wicker chair, this figure should be 40 mm at all). However, the gymnastic ring is perfect for children's version. A small cross section is compensated by the multilayer filler.
Softwood. Such hoops are light, but require careful processing, as moisture and heat contribute to the destruction of the tree.
Plastic water pipe. Perhaps, the best option to implement the idea. PVC is cheap and durable material. The hoop is made by folding the cut off part of the pipe into a ring. For fastening, parts made of wood or plastic are used.

The list of materials suitable for creating a hoop is not limited to the listed options. Everyone chooses the basis for the frame - it all depends on the imagination.

Case preparation

Cutting material for a hammock chair requires accuracy and care. If in doubt, it is better to leave a small supply of fabric, in the future it can be removed without problems.

The principle is this: measure seven times, cut once.

First, take a 3-meter piece of fabric and cut out 2 squares from it - 1.5 meters long and wide each. We add both in 4 times. In the corner in the center we mark a circle with a diameter of 65 centimeters. We draw a line along the marked points. Cut out identical circles from each square. We move away from the edge of the circle 4 centimeters and draw a dashed line.
We cut out the squares
On the first circle we put two holes. They are for slings. Next, fold the fabric 4 times and iron. We take folds as reference points. Two slings should have a slope of 45 degrees, the others - 30 each. Having selected the corners, open the circle and iron it again. As a result, axes are obtained, indicating the points of the slot for the sling.
We select the necessary holes on all axes - rectangular figures 10 cm wide and 15 cm high. Y is marked in the inner part. A cut will occur along its contour. We add circles between ourselves, but in such a way that the threads do not combine with each other. Because of this, the cover will be able to withstand the load better. Put the circle on top. We cut the marks on two circles at once.
We bend the ends of the cut holes to the reverse side. We attach a braid around the perimeter of the figure or process it with doubler so that the material does not crumble. Next, cut through completely and sew along the edge, leaving 3 mm.
Bend and sew the edges
Leaving the marked 4 centimeters along the edges, we connect the circles with each other, highlighting the cut for inserting the hoop. The left pass is cut in such a way that the teeth are obtained along the entire edge. Turn cover right side out and iron.
We cut the filler in strips, then sheathe the hoop (preferably in 2 layers). We insert the processed design into the case. Moving the ring towards the edge, we sew all the circular parts at a distance of about 7 cm from the end.
Insert and sew the hoop
The edges of the unsewn cut intended for inserting the hoop are turned inside out. We carefully cut off the allowances from the front side so as not to damage the correctness of the circle. We connect the edges and scribble on a typewriter, leaving a few millimeters. We move the frame to the stitched end, we sweep the fabric by 7 cm.
Sew the edges
Syntepon mode through the slots and move it inside the material, securing it with threads. We close the side holes with a hidden seam. Then we fix the cover on the hoop, stitching it along the verified 7-centimeter basting. Make a knot after every 4 stitches. Further rows are made at a distance of 7 cm from the previous one, so that the thick fabric can gather into soft folds.
Sling mode for four 2-meter segments. It's better to burn the edges over the flame. We put the end into the hoop through the prepared slot. It is necessary to fold so that a loop is formed. With the help of a needle we cut off and sew a line. For all lines, the algorithm is the same.
Attaching the slings to the hoop
We put the end from each into the buckles, then into the ring and again into the buckle. It is necessary to weave everything well in order to be able to change the height and tilt of the chair. The ring serves to collect the slings.

Pattern example

Hanging chairs are a kind of swing, cozy place for relaxation and privacy.

Making a wicker chair

Macrame technique allows you to create original products on your own.

Photo: egg-shaped wicker hanging chair - a comfortable place to read books in the fresh air

it unusual building consists of several circles woven together in a macrame. For such an "egg" you will need the following details:

2 metal-plastic rings with a section of 35 mm. One for the backrest measuring 1.1 m, the other for the seat - 70 cm.
Polyamide 4 mm thread, 900 m long. In the store, ask about the option with a polypropylene base, which guarantees strong knots.
Twelve meter lines.
2 thick ropes for connecting hoops.

It is worth mentioning that rings of smaller diameter are also suitable for the product, since these characteristics are the maximum for the chair. It is better to buy a thread of the required length immediately in order to avoid differences in color or quality. After preparing all the parts, you can safely begin to work on creating an "egg".

For weaving the back, any patterns are suitable. The cord is attached to the top. The work is going down. On the lower hoop, the knots are tightened, the remnants of the threads are collected in tassels. The design requires reinforcement with 2 wide cords connecting the seat to the back. To finished product attach slings - and the hanging chair "egg" takes its well-deserved place in the summer cottage.

Having made such a device, you will receive cozy corner for a secluded holiday and forget about problems and stress for a long time!

Hanging chairs, which last years settled in interior fashion, are unique inventions. They not only add coziness, add variety and fill the home environment with romanticism, but also play a role functional item interior. It is not difficult to make a hanging hammock chair with your own hands, it will look especially relevant in the country house or on the veranda of a private house and will become perfect place for relax.

Wicker hammock chair on a rigid frame

Not the easiest to manufacture, but the most comfortable are hanging hammock chairs based on a rigid frame. Most often, they are an ordinary metal hoop, of the type used for gymnastics. You can make a hanging hammock chair with your own hands in several ways from different materials, however, macramé or textile hammocks are the most convenient and easy to manufacture.

Fabric hammock chair

What you need for a macrame hammock chair

If you know the art of macrame, then it will not be difficult to make a hanging chair that will create a unique peaceful atmosphere on the veranda. In this case, you do not have to sew, because the whole structure will consist only of a frame and a woven fabric, the pattern of which you choose yourself. To create a macrame hammock chair with your own hands, you will need:

two metal hoops, the diameter of which should be different. For sitting, a diameter of 80 cm will be sufficient, for the back - 110-115 cm;
800-900 m of dense rope material or polyamide cord for weaving;
12 meters of lines;
strong cords for fastening hoops;
a pair of wooden rods;
centimeter, scissors, gloves.

The art of macrame will allow you to create an elegant, graceful and comfortable chair.

The most convenient and practical will be hoops made of a metal-plastic tube with a cross section of not more than 35 mm. It is this hoop that can give the entire suspension structure the necessary strength. Make a tube hoop as follows:

Decide on the length of the segment using a simple formula, based on the required diameter of the hoop: S = 3.14xD. Since the outlet needs a diameter of 115 cm, the required pipe length will be 361 cm.
In the same way, calculate the length of the pipe for the second hoop. To connect the ends of the tubes in the manufacture of hoops, plastic gaskets are useful, which are fastened with ordinary screws.

For weaving the back and seat of the chair, you will need ropes with a diameter of 4-5 mm with soft surface or a strong rope with a polypropylene core - such material is sold in a building materials store. Its advantage is that when weaving, strong knots are created that do not “spread” as it happens with cotton threads. It is advisable to purchase the entire length of the cord at once, so that later you do not suffer with the selection of a material similar in texture and shade.

Hanging Chair Assembly Instructions

Stage 1: Winding the frame. The surface of both hoops must be covered tightly, without gaps and sagging, with a cord, tightening every couple of tens of turns.

Do this work with gloves to avoid blisters or cuts.

Stage 2: Weaving the seat. Fasten the threads along the diameter of the smaller hoop with the same distance between them, and then proceed to the pattern. Macrame drawing can be anything: you can give free rein to your imagination and skill if you are well aware of the macrame technique. Most craftsmen prefer the classic chess. And the use of flat knots in this weaving will allow even a not very experienced “knitter” to make a hammock chair with their own hands using macrame.

The two-color "checkerboard", despite the simplicity of the pattern, looks very cute and original.

Stage 3: Assembly of the structure. Before proceeding with the design of the back of the hanging chair, you need to fasten the hoops together. Do this by gathering and wrapping them from one end with a tight, strong tourniquet. At the same time, it is important to determine the length of the support rods: the larger it is, the deeper and higher the hammock chair will be. Before fixing, it is better to provide the ends of the rods with small cuts: this way you will eliminate the risk of slipping, the structure will be more stable.

A phased diagram of a macrame hammock chair

Stage 4: Weaving the back. You can weave it with any pattern, but it is better that it matches the method of weaving the seat. Weave the back from above, descending to the lower hoop and tightly fastening the ropes.

Watch the elasticity of weaving: the reliability and practicality of the design will depend on this

When you finish weaving and you have free edges of the threads, if desired, form a fringe from them. From the remaining ropes, weave strong cords for hanging the chair. The result is a practical, elegant, comfortable hammock chair that will decorate any interior.

A variant of the frameless macramé hammock chair made of twine

How to install a wicker hammock chair

Think in advance where the hammock chair will be hung: whether it will be a wide branch of a tree in the garden or the ceiling. suspension mechanism must be reliable, because he has to withstand the weight of not only the chair, but also the person located in it.

Crossbar - simplest way hammock fasteners

If a do-it-yourself hanging hammock chair is planned to be placed in the garden, then you can purchase a wide and durable carabiner and hang the product on a wooden beam. If the chair is made for the home, then in ceiling plate make a hole and fill it with a special high-strength polymer chemical.

After filling the voids in ceiling covering, attach a ring or hook to it. But you need to hang a hammock chair on a similar design after the solution has completely solidified in the ceiling - at least two days after filling.

Example ceiling mount for hammock chair

on the veranda with wooden ceiling You can fix a hammock chair with your own hands very simply: in drilled hole a bolt mount made of high-strength steel is placed, for which the hammock will be hung on a carabiner, hook or ring.

How to make a hanging chair out of textile

If you are unfamiliar with the technique of weaving macrame, do not despair. There are many options for how to make a hammock chair with your own hands, and one of them is a textile chair. For its manufacture, you can also use a hoop, while an ordinary gymnastic one, with a diameter of 90-93 cm, is suitable. You can use a fabric of any color, which will make it possible to decorate and add zest to the interior of the veranda.

A variant of a frame textile chair-hammock for a garden and a summer residence

Materials for a textile chair for a veranda

In addition to a hollow metal hoop for a textile hammock chair, you must:

about 3 meters of fabric of any color, but its structure should be quite dense (denim or thick cotton will do);
synthetic winterizer for filling a cover made of fabric;
4 buckles, hanging ring;
braid or interlining - at least 3 m;
belt tape - about 9 m;
sewing machine and related accessories for sewing: centimeter, thread, scissors.

For the manufacture of a hanging chair, a hoop made of a bent metal-plastic pipe is often used. Some use bent wood, but this option is only suitable for being indoors: with temperature changes, the tree dries out and changes shape.

Manufacturing technology of a fabric hammock chair

First, make a fabric base. From a 3-meter piece of fabric, make two circles, each with a diameter of 1.5 m. It's easy to do it step by step:

cut the fabric into two even parts;
fold each in four;
marking the border of the circle with a radius of 65 cm from the center, cut off the excess fabric.

Having made a pattern of a hole for the sling, sheathe the edges with braid or glue them with interlining

Having familiarized yourself with the diagram, mark and make holes for the slings at angles of 45 ° C and 30 ° C.
After marking the place for the lines, straighten the circles. It is better to work with both cuts at once, superimposing one circle on the other: this way all lines and cutouts will be symmetrical. Pins will help to make cuts for the lines on both circles at the same time, with which you need to chop off the cuts.
Sew a zipper into one of the circles in the middle, the length of which should match the diameter of your hoop.
Leave the zipper open.
After that, stitch the two circles together with the front sides at a distance of 1 cm from the edge.
Turn out the resulting cover, iron it.
Sheathe the hoop as tightly as possible with pre-prepared strips of synthetic winterizer, and then process it with the same fabric from which you make the hammock chair: this way its operation will be much more convenient and reliable.
Put the hoop into the resulting case through the zipper and close it. With a strong thread, make a blind seam around the entire circumference, framing the ring from the inside.

How to hang a textile hammock chair from a hoop

Divide the prepared 8-9 m of belt tape into 4 equal parts and thread it into the cells left for the slings. It is better to melt the ends of the tape with fire so that the belts do not unravel during use. Wrapping the hoop with a ribbon, fasten it and sew it with strong threads.

You can replace the belt tape with strong ropes, fastening them at the top with a ring

To be able to adjust the height at which you are going to hang the chair, as well as its slope, thread metal or plastic buckles into the free ends of the belt tape. Gather all the slings into a single suspension (a special iron ring), which can be fixed with a carabiner in place for hanging the chair.

Note: a do-it-yourself hanging hammock chair will become even more beautiful, more comfortable and softer if you place multi-colored cotton pillows with synthetic filler on it.

Quick options for making hanging chairs

A do-it-yourself hammock chair can be made lighter, fast ways from improvised materials. We are talking about soft structures, without the use of frames in the form of hoops.

Attach a couple of pillows to your hammock chair for more comfort. comfortable rest

Place a rectangular piece of fabric, approximately 1.5x1.2 meters in front of you.
Make cuts on its sides every 7-8 cm: the cutouts will be rectangular, the width of each of them will be 4-5 cm.
Tape each neckline to prevent fraying.
The protruding tucks will be the fasteners of the chair, in total they will turn out 12-14 pieces. Wrap each of them tightly and secure with a strong rope.
Connect the free ends of the ropes on one side and the other into one knot, make a loop and hang the hammock chair on two powerful carabiners or on a wooden plank, drilling a couple of holes in it.

The most convenient way to hang such a hammock chair is by a wooden plank.

On a square piece of dense fabric, mark a distance of 6-7 cm on both sides.
Wrap the edges of the fabric and sew along the marked line with a strong thread. These holes are needed to pull and secure the rope on which the hammock chair will be hung.
Pull a thick tourniquet or strong rope through the holes made and close at the top with any of convenient ways described earlier.

In such an armchair you will feel as if in weightlessness, on a soft airy feather bed.

Make a hanging chair from a textile cover, filling it with padding polyester and hanging it on chains from metal brackets to the ceiling.

As you can see, manufacturing options hanging hammock chairs for home and summer cottages - a lot. Which one to choose depends only on your preferences, imagination, talent and skills. The main thing is that the end result pleases with comfort, reliability and aesthetics.

Hanging chairs are an alternative to a rocking chair on skids at home and a hammock in nature. Comfort and easy rocking will help you relax and unwind after a hard day. A variety of models and materials for manufacturing allows you to harmoniously integrate such a chair into any interior. And it is not necessary to spend money on the purchase. Some models are easy to make with your own hands.

Types of hanging chairs

They produce a variety of models and designs. They can be made of wood, metal, rattan, wicker, transparent plastic. There are models that you can easily make yourself.

Swing chair. Fastening is carried out at two points. Due to this, the structure sways in one plane. There are soft models (hammock chair) or on a rigid frame:
- the basis of the first option is a soft fabric or woven fabric, which is easy to sew, weave with macrame technique or crochet - the ends of the panel are attached to the transverse bar with 4 slings, and it is already suspended from the ceiling or a stand-leg;
- the second option has a rigid frame made of acrylic, plastic, wood, rattan or metal in the form of a hoop covered with a soft base.
Nest chair. The basis of the design is 2 strong hoops. The model has a flat bottom and low sides, which are braided with a cord, rope or tied with strong threads.
The chair-cocoon (egg) differs from its counterparts in greater closeness, often up to 70%. backrest and side surfaces high and connected above the head. Rigid frame braided suitable material or lined with fabric. Varieties of this model - basket chair and drop chair - perfect option for the children's room.

Hanging chairs of various shapes - gallery

Techniques and finishing materials

Such chairs usually have a rigid frame and a seat made of various materials.

Textile. An affordable and easy-to-use material, the density and strength of which is selected based on the expected load. Suitable raincoat fabric, tarpaulin. The chair for children from old jeans with pockets and rivets looks original.
Knitted fabric. Craftsmen who are proficient in knitting or crocheting can use their skills to create original chair from monophonic or multi-colored threads.
Macrame. Weaving from a durable cord will not only last a long time, but will also give a special flavor to any interior.
Vine, rattan. Armchairs made from eco-friendly materials, will decorate any interior, but special skills are needed to work with them. In addition, rattan does not grow in our country.

It is interesting! Unusual and very durable material for braiding a chair - a thread of plastic bottles. Such a chair will not get wet, does not deform, it can be hung on the street.

frame material

The base of the chair can be made from different materials.

Gymnastic hoop. Only suitable for child seat, for an adult, its strength is not enough, because the cross-sectional diameter is 16 mm, and for the frame of the chair you need 2 times more.
Metal pipe. The product from it will turn out to be durable, but heavy - at least 7 kg. For its manufacture, pipe bending equipment is required.
Wood. The design will be durable, lightweight, environmentally friendly. Since the material absorbs moisture and dries out in the sun, wood for outdoor chairs must be treated with impregnations. This will protect the material from decay.
Metal pipes. Durable, lightweight and non-corrosive material. When using coiled pipes, there is no need to bend them. The ends of the segment are connected with a wooden or plastic insert and secured with screws.

Do not use dilapidated material in the manufacture of chairs: such furniture will not last long.

Hanging rockers made of various materials - gallery

We make a hanging chair with our own hands

A handmade hanging chair will look good in the country house or on the veranda of a private house. The easiest to manufacture is a hammock chair. It can be done in several ways from different materials, but the most convenient and uncomplicated of them are macrame or textiles.

Hammock without frame

For work you will need:

dense fabric - 1.5x1.5 m;
durable cord;
wooden rod for fastening;
sewing accessories.

After preparing everything you need, proceed to the assembly process.

Swing on a rigid frame

To make it you will need:

hoop with a diameter of 90–95 cm;
durable fabric 3 m long and 1.5 m wide;
lightning - 90–95 cm;
strong cord or rope - 10 m;
metal rings for attaching the structure to the ceiling;
interlining;
scissors;
tape measure;
sewing accessories.

When all the materials are prepared, proceed to the execution of the chair.

Fold the fabric in half and lay it out on a flat surface.
Place the hoop in the center, mark around the circle at a distance of 20-25 cm from it and connect the marks with a line. Cut out 2 circles.
On one of the blanks, make a cut through the center with a length equal to the diameter of the hoop, sew a zipper in this place.
Connect both blanks with a seam around the circumference.
Make cutouts on the finished cover for attaching ropes to a 10 cm long hoop. To do this, fold the cover in half and measure 45 ° C from the fold line in one direction, 30 ° C in the other, put marks.
Duplicate the marks on the second part of the circle. The distance between the cutouts in the front of the chair should be greater than in the back.
Treat the slits with tape.
Wrap the hoop with a strip of synthetic winterizer, to secure it, connect with a seam.
Insert the hoop into the case, fasten the zipper.
Cut the cord into 4 pieces 2.2 and 2.8 m long. Fold each piece in half and fasten to the hoop. To do this, thread a loop through the hole in the cover, and insert the ends of the cord through it and tighten them. Long cords should be in front of the chair, and short cords in the back.
Tie a short and long cord with right side to one ring, from the left to the other. Make strong knots.
Hang the rings from the ceiling, a beam, or a thick tree branch outside.
Put pillows inside or sew a round mattress. So the chair will become even more comfortable.

Instructions for making a rocking chair from a hoop - video

How to make a wicker nest chair: step by step photos

By making the seat flat and providing the structure with sides, you can get a nest chair. For such a rocking chair you will need:

two hoops made of a metal-plastic pipe with a cross section of 35 mm: for a seat with a diameter of 70 cm, for a backrest - 110 cm;
polyamide cord 4 mm thick - 900 m;
sling or strong rope - 12 m;
a thicker cord to connect the seat and backrest.

To make this chair, you need to be able to weave.

First, braid both hoops:
- wrap the pipe with a cord (it is worth taking a cord with a polypropylene core, as it will help to make a stronger knit);
- pull the thread well (each next turn should fit evenly and tightly against the previous one);
- every 20 turns, fasten the thread, pulling it as much as possible and twisting it;
- for greater strength, coat the weaving with glue.
At regular intervals, fasten with a double loop on the braid of the hoop pieces of the cord folded in half. They should take half the length of the hoop.
Weave the bottom of the chair with flat knots in a checkerboard pattern, securing the remaining ends to a free semicircle. The tension of the cords when weaving should be quite strong. It's not scary if the hoop is slightly deformed, in the future the shape will be restored.
Connect the finished seat and back hoop by wrapping them together with a cord in front of the structure.
At the back, connect the seat and the back hoop with two wooden spacer rods, making cuts at their ends for a strong attachment. The length of the spacers is selected in accordance with the desired backrest height.
Attach the cords to the upper arc of the back and weave from top to bottom. Fasten the rest of the cords to the seat and form brushes out of them.
Connect the upper arch of the backrest and the seat with a thick cord parallel to the spacers, and then remove them.
Tie slings to the finished structure. They also need to be made using the macrame technique from cords.
Hang up a chair.

Weaving "chess" with macrame technique - video

How to make an egg chair at home

An egg chair (cocoon) is the most difficult option for a home master. The design is closed on three sides, and the side surfaces and the back are closed over the head.

For work, you can use metal-plastic pipes by assembling a frame from a hoop and additional arcs. To give additional rigidity, the structure is reinforced with several horizontal arcs, the elements are connected to each other with self-tapping screws.
The finished frame is braided with a cord using macrame technique, sheathed with fabric or crocheted.
For someone who knows how to work with wood, the frame is easy to cut out of thick plywood.

Fabric cocoon baby chair

For children, a cocoon chair can be sewn from fabric. It does not take up much space, organically fit into the interior of the children's room and is not traumatic.

To make it you will need:

2 meters of dense fabric 1.5 m wide;
lightning;
pillow or inflatable balloon;
sewing accessories.

The technique for making a cocoon is simple, the main thing is to follow the instructions.

Instead of a pillow or an inflatable chamber, you can insert a hoop into the bottom of the chair, then you get a drop chair.

How to make a cocoon baby chair - video

Mounting suspended rocking chairs to the ceiling, rack, beam

For any suspended structures the main thing is a reliable fastening. The safety of those who will use the chair depends on it. There are several mounting options:

to the ceiling;
to the stand-leg;
to a tree branch or beam (for the street).

If indoors stretch ceiling, then installing the mount will be problematic. In this case, you need to mount the structure before fixing the ceiling or you should purchase a special stand-leg.

Consider different variants installation.

You can drill a hole in the concrete ceiling, install a powerful anchor with a hook for hanging the structure. On sale there are special sets consisting of an anchor, a hook and a chain. Fasteners must withstand a weight of at least 120 kg.
Voids in the ceiling through the hole must be filled with a special solution of high strength polymers - chemical anchors. Such compounds are sold in tubes for building syringes. Then you need to insert the anchor into the hole and wait a day until the composition is completely dry.
For a ceiling with solid floor beams or for a terrace and a street, bolting is suitable.
For false ceiling it is worth purchasing a special suspension that has a bracket that is attached to the concrete ceiling and exits through the suspension. A hook is attached to it.
Mounting bracket is mounted on concrete ceiling, then a hook is screwed to it
Slings are tied to a tree branch with a strong knot.
The leg stand can be purchased at the store. It is convenient because the chair is not fixed permanently in one place and can be moved, and if necessary, disassembled and transported.

Do-it-yourself rack drawing

The simplest stand-leg for a hanging chair can really be done independently.

The wooden rack consists of only 5 parts, but it cannot be made without special equipment, all parts are bent.
The most common option is a metal rack. To make it you will need metal pipe, pipe bending equipment and welding.
A simple version of a metal rack: the design does not require complex drawings and special skills.
For stability, a simple metal rack is attached to a vertical support with a chain or cable.

To fully relax, it is not necessary to spend a lot of money. With a creative approach to business, relaxation will become not only relaxation in a hanging chair, but also the process of its manufacture. And the product will cause legitimate pride.

Each of us strives to equip the interior of the room in such a way that it is not only cozy, but also comfortable. This is quite logical, because after hard working days you want to relax in a comfortable environment so that nothing disturbs you. Such a favorite place can be a cocoon chair.

Previously, such structures were used only on suburban areas, today it has become fashionable to hang them in urban dwellings. And why not, if space permits?

A hanging cocoon chair is not cheap, so it is not available to every ordinary resident. How to be? Everything is obvious: you can make a chair with your own hands, because it is not as difficult as it might seem at first glance.

Types of hanging chairs

Armchair with hard frame.

The frame is usually made of rattan and wicker, in some cases acrylic and plastic. Cushions and small mattresses are used as seats.

Hammock chair.

The design of such a chair is similar to hammocks, the only difference is in size and fastenings.

Chair-cocoon.

The peculiarity of the model is that 3/4 chair is closed. Basically, the walls are made wicker in the macrame style.

Drop chair.

The model is similar to a hanging house, especially suitable for installation in a children's room.

Armchair on a stand.

The main feature in the mount is that due to the wide stable leg there is no need to mount it to the ceiling, the structure is placed on the floor. The advantage of this chair is that it can be placed anywhere in the house.

Features of creating a hanging chair

Today, there are more and more craftsmen who managed to make a master class for making such a design tells in detail about this process.

A distinctive feature of the chair is its resemblance to a spider cocoon. Such an element will decorate absolutely any interior and will become a favorite vacation spot. According to its structure, it is an unfinished ball, braided with ropes.

The most simple technology creation looks like this:

First of all, a frame is created. As a rule, 2-3 hoops of the same size are used for this, which are interconnected so that a ball is obtained. In order for the ball to keep its shape better, several more half rings are installed inside.
To make it comfortable to sit in a chair, you need to put a seat there. It can be a pillow, a plank, or you can just weave it.
In order to be able to sit quietly in the ball and not fall through, it is necessary to cover it with a net. Here, too, there are several options: you can buy a ready-made mesh, you can weave it yourself, or you can simply wrap the chair with a rope.
The chair must be hung from the ceiling. This will not be a problem if you initially provide hooks or brackets on the product, through which you can attach a chair. After all, the main thing in a hanging chair is the ability to swing from side to side. In some cases, a spring is used so that you can swing up and down in addition.

How to make a macrame chair

It is within the power of everyone to make a cocoon chair with their own hands, a master class of the process itself, the main thing is to have it at hand.

You will need:

two with a diameter of 90 and 110 cm, a cross section of 35 mm;
polyester cord with a diameter of 4.5-5 mm;
crochet hook No. 8-9;
slings - 12 m;
2 wooden bars 60-80 cm;
tape measure, scissors.

The bottom of the chair can be crocheted or weaved using the macrame technique.

First of all, it is necessary to wrap the hoop with a cord, tying every tenth turn in a knot.

Starting from the center, crochet a tight viscous circle of air loops and single crochets. After 6-7 circles, you can proceed to the manufacture of the seat with a dense viscous, as well as the back, which can be made into a mesh.

knitted product in ready-made should not reach the edges of the circle by 10 cm. Knitting will require about 120-160 m of cord.

It is worth fixing the seat on the hoop from the side of tight knitting, at this time it is necessary to evenly stretch the napkin along the diameter of the hoop.

Suspension Chair Seat Manufacturing

The macrame seat is much more economical, you will need the following parts of the cord:

8 pieces of 6 m;
4 to 5;
4 to 4.5;
2 to 4.

Now you need to place the blanks on the hoop. 8 threads are fastened in pairs in the center at a distance of 6 cm from each other. All the rest are fixed with the same distance on the sides.

To fix the cable, it is necessary to make a knot on each thread. We knit with a knot at a distance of 6 cm, periodically we stretch.

In order for the cocoon chair to be fringed, it is necessary to lengthen each thread by a meter and not cut the end.

How to make a chair frame and back

To make a hanging cocoon chair with your own hands, you need to take care of a solid frame. Wooden rods should be wrapped with a cord and inserted into the back, they should be fixed before knitting the back.

hoops on opposite side must be secured with string. The frame is knitted in the same way as the seat - with a network of knots.

The next step is the location of the straps on the seat and the suspension of the chair.

Making a hanging hammock chair

To make a frameless cocoon chair with your own hands, you will need to acquire the following materials:

two meters of dense fabric;
wooden stick;
drill;
carabiners for fastening the rope;
rope for climbing;
sewing accessories.

It is easy to make a cocoon chair with your own hands, a master class will help you with this.

So, we fold the fabric in half, count 18 cm from the top corner, mark a triangle on the fabric to the bottom corner, cut it off.

We bend the sides by 1.5 cm and hem the fabric.

We drill two holes on a wooden stick on both sides at the same distance, thread a rope into the nearest holes and fix it with knots. A carabiner will be located in the center of the cable, so we mark this place with a knot.

The fabric is pulled into the threaded ropes on both sides, and the ends of the cable are inserted into other holes of the stick and secured with a knot.

To fix the chair on the ceiling, a hook and two carabiners are installed on it, the rope of the chair is threaded onto the lower one.

It remains to put a pillow on the seat and you can relax.

Hanging chair with cover

In order to make your own cocoon chair with a cover, you will need:

2 m thick fabric;
metal hoop with a diameter of 90 cm;
lightning 1 m;
carbine;
10 m of rope;
sewing tools.

Fold the fabric in half and cut out the circle so that it is 25 cm larger than the hoop.

We sew a zipper.

We cut 4 holes along the edges of the product, grind it.

We put the hoop into the case, insert the rope into the holes and attach it to the carabiner.

Choosing a cocoon chair is a matter of taste

The manufacturing options described above are not the only and unique ones. Can be added already existing technologies own ideas or even come up with something new. The main thing is to treat this process with imagination and desire.

Especially often you can find hanging chairs made of vines, wooden slats.

Instead of hoops for the frame, you can use whatever comes to your mind or comes to hand. As weaving, you can also choose absolutely any options, be it ordinary ropes, fabric or a fishing net.

Buy a cocoon chair or make it yourself - in any case, you decide. The variety of materials on the market allows you to create hanging chairs from whatever your heart desires. AT recent times Increasing attention has been paid to products natural materials they do no harm environment and owners and looks aesthetically pleasing. So, for example, a rattan cocoon chair would be an excellent option.

Before similar designs usually installed in country houses and on household plots, however, in modern time they became frequent guests in modern designs apartments.

Having done hanging cocoon chair with your own hands, you can create a master class after this event yourself. Then a lot of those who wish, who did not dare to make such a seemingly complex decor element, will follow your example.