Review: Good store, the most low prices, polite person!
07.09.2018 07:43
Review: 06/19/2018 I chose the Hephaestus 6300-03 0046 gas stove on the website, but I wanted to see it "live", I called and the manager Andrey told me the addresses of the stores where you can see the order. Then he very thoroughly and kindly answered all my questions, advised on the issue of delivery, i. as if accompanied the entire period until the purchase of the stove. On 06/22/2018, the stove was delivered, and exactly within 1.5 hours after the call, as promised! Thanks to this clarity in organization, I managed to call the gasman, and the stove is already working! Thanks to all those responsible for working with clients, it is felt that we are really welcome, and not an automatic phrase on duty. By the way, the phone, despite the fact that it is on the whole " Soviet Union", works quickly, and live people immediately answer, this is also a plus. Spa-si-bo!
22.06.2018 17:39
Review: I thank the manager Fedor for his help in purchasing a gas meter, advice and prompt delivery. Manager Andrey - thanks for the reservation at the pick-up point. Good luck and prosperity!
22.03.2018 12:02
Review: Bought a column. Didn't know anything about them. All explained plain language. After that, it was not difficult to make a choice. Thank you for the column and recommendations for choosing.
14.02.2018 18:17
Review: I made a purchase through the site, in a store at Novo-Vokzalnaya 4, ran into rudeness on the part of the seller, who simply refused to advise, citing that I had to study everything myself on the Internet, an extremely unpleasant impression was left.
Response to the review from the site "Boiler & Column":
Hello dear Anton!
We will definitely resolve this issue. At present, the information has been brought to the attention of the management that the manager at Novo-Vokzalnaya, 4 violated the regulations, and measures will be taken. Please accept our apologies. Thanks for the feedback!
09/08/2017 Hurrah! A warehouse was opened in Ufa and a pick-up point for the Kotel Kolonka online store with the possibility of self-delivery began its work. Now you can purchase heating, gas, electrical equipment and related products on the spot, payment upon receipt.
Warehouse and pickup point address: Ufa, st. Novozhenova, 88 letter 1E
Warehouse and pickup hours:
Mon-Fri: from 9-00 to 18-00
Sat-Sun: day off
T. 8-800-200-10-91 (toll-free within Russia)
Low prices, promotions, discounts, wide range of!
We are waiting for your orders on the site! 06/30/2017 Informative article about solar collectors. Soon summer season, and colletcore - a good option water heating.
18.01.2017
Online store "Boiler & Column" gives discounts!
When buying a kit "OVEN + PANEL + HOOD" or "BOILER + BOILER + PUMP" you are given the opportunity to ask for a discount from the manager when placing an order. The amount of the discount is calculated on an individual basis.
For all questions, you can contact tel. 8-800-200-10-91 (free call within the Russian Federation)
Sincerely,
The team of the online store Boiler & Column
The Junkers geyser installed in the house will provide quick preparation hot water and please with its excellent appearance. This is a modern water heating equipment manufactured on the basis of advanced technologies. However, the use of advanced developments did not deprive geysers Junkers certain disadvantages. However, they are found in many houses and apartments. Here are the main advantages of these columns:
- Excellent appearance– Junkers speakers have an excellent strict design;
- Large selection of performance;
- Convenient control - a minimum of control elements.
The choice of buyers provided big choice columns that differ in their performance, thermal power and type of ignition system. Some design solutions unfortunately missing. Their main advantage is affordable price. Flow-through geysers from this manufacturer are offered in many stores selling water heating equipment and gas equipment. What do reviews of Junkers gas water heaters say? Our review will tell about this.
Junkers geysers have received many positive and negative feedback. By familiarizing yourself with them, you can right choice and choose the most reliable gas water heater.
Geyser Junkers WR 13P
Gennady
We bought a Junkers WR 13P gas water heater less than a year ago and are already planning to change it. By its design, the column resembles a leaky sieve - water flows from all holes, and the heat exchanger has already been soldered a couple of times. There is a feeling that the heat exchanger itself is made of thin foil and is completely unsuitable for working in gas equipment. Not a week goes by that I don't have to tighten or patch something, it just pisses me off. Seals keep leaking gas reducer Broke after a couple of months of use. If you want to keep strong nerves, do not buy this column, it is better to buy a Bosch gas water heater.
Advantages:
- Electric ignition, thanks to which the column is spared from a constantly burning igniter;
- Works well at reduced pressure, the gas is ignited confidently and without hesitation;
- The maximum capacity is 13 l/min, which is what you need for two taps.
Disadvantages:
- Everything leaks that can leak, from seals to the heat exchanger;
- It makes noise during operation like an old Soviet column.
Geyser Junkers miniMAXX WR 15P
Behind the strict appearance and good performance lies a miserable filling, not much different from the filling of domestic gas water heaters Oasis. Let's start with the heat exchanger - it is unrealistically thin, lost weight six months after buying the column. Then the gaskets began to leak, they had to be constantly changed, otherwise it was possible to flood the neighbors. Sometimes the igniter goes out, as the gas control is triggered - and it is impossible to understand why it suddenly works. It is impossible to repair its “guts”, since everything is very thin, flimsy, non-repairable, I don’t know at all how it was developed and how it is produced - this is one big drawback. And even the fact that it can work with little pressure, does not justify her snotty fragility. This is not a column, this is sheer torment.
Advantages:
- Easy control, no extra handles and buttons, the temperature is easily regulated;
- Good performance, you can open two taps at once or take a shower while someone is washing the dishes;
- Noise is not strong, does not scare anyone with its noise.
Disadvantages:
- This column itself is one big disadvantage, since literally everything breaks in it;
- Terrible heat exchanger, the thinnest copper that can not withstand heat;
- Constantly flowing, threatening to flood the neighbors. Who knows how it will break through next time;
- It cannot be repaired, since it is impossible to repair these "snots".
Gas burner Junkers miniMAXX WR 13G
In general, a good column, it served me for three years, after which the heat exchanger began to leak. Disassembly showed that a crack had formed in it. This was the most serious malfunction, and for three it served properly. As it turned out, a flimsy heat exchanger is a disease of all gas water heaters from this manufacturer. The fact is rather strange, given that trademark belongs to such a well-known company as Bosch. The verdict is this - if you're lucky with the heat exchanger, then the geyser will last a long time. If you are not lucky, you will have to constantly solder the heat exchanger.
Advantages:
- The absence of batteries allows you to get rid of unnecessary expenses, since ignition is carried out from a miniature generator rotating under the pressure of water;
- Solid appearance, no frills;
- Productivity up to 13 l / min, this is enough for a washstand and a shower cabin.
Disadvantages:
- Flimsy heat exchanger, leaks regularly and requires soldering. Moreover, soldering helps for a short time;
- Sometimes it goes out without visible reasons, which I have not been able to find.
Geyser Junkers miniMAXX WR 10P
If the burner does not ignite at the Junkers gas column, it's time to clean the igniter. I came to this conclusion after a year of fiddling with the miniMAXX WR 10P column. The device is not bad, but not without some shortcomings - and the burner is an eloquent proof of this. I bought this speaker for reasons of economy, so I took a model with a minimum power, since I live alone, and usually either the faucet or the shower works for me. The column quickly heats the water, ignites without pops and rumbles. I was pleased with the presence of protection against overheating and a gas control system - this makes the column safer.
Advantages:
- Fast heating of water, no need to wait long for it to warm up;
- A minimum of controls, there are no unnecessary things, such as self-diagnostic systems;
- Ultimately simple design, you can repair the device yourself, without calling the master;
- No need to spend on batteries.
Disadvantages:
- Often there are problems with the operation of the igniter, but the burner itself almost never goes out;
- The manufacturer promised a trouble-free start at a minimum pressure, but I would not say that it always starts - in the summer it starts with two or three attempts when the water barely flows.
Geyser Junkers Jetatherm WR 275-1KDP
Bought this speaker a long time ago. Reading reviews of modern speakers, you are involuntarily amazed at how messed up the quality is. But our column has been serving for 7 or 8 years already. During this time, practically nothing broke in it, only changed the current gaskets a couple of times. But otherwise, the model deserves a positive review - it is reliable, works well in conditions of reduced pressure. Calmly heats water up to 55-60 degrees, this is more than enough for the house. True, I would gladly supplement it with battery-powered ignition - and then there would be no price for it.
Well-chosen original Spare parts for Junkers speakers are a guarantee of continuous operation of Bosch equipment and high-quality water heating in any volume. In water heating equipment from a German manufacturer, every stroke is thought out, therefore, using high-quality spare parts for geyser Junkers You can significantly extend the life of water heaters and reduce the cost of subsequent unforeseen repairs.
Our company offers original and manufacturer-recommended parts, consumables that are necessary for maintenance and repair. If the apartment / house is installed in need of repair geyser Junkers parts buy available in the following range:
- Heat exchangers for water heaters wr275 wr350 wr400;
- Membranes, seals, gaskets;
- Automatic blocks of ignition;
- Overhead and built-in temperature sensors;
- collectors, three-way valves, smoke pressure switch, etc.
 |
|
 |
Main safety nodes (Fig. 1, 2) 1 Flue gas sensor (Fig. 1). Temperature Water fitting device (Fig. 3–9) |
Refurbished gas Junkers column, spare parts for which they were purchased in our store, has high efficiency rates, consumes fuel economically and does not require additional maintenance costs (provided professional performance repair, maintenance and installation of parts).
| A PHOTO | DESCRIPTION | |||||||||||||||||
 |
Water valve WR13/13-2 Bosch (87070063430) Water valve WR10/10-2/11 Bosch (87070062860) Water valve WR15/15-2 Bosch (87070063440)
|
|||||||||||||||||
 |
Junkers gas column piezo button. Bosch Piezo button (piezo igniter, piezo ignition button) Junkers speakers (8748108023) WR 10-13-15 250, 275, 325, 350, 400, W125, 200, 250, 275, 325, 350, 400 |
|||||||||||||||||
Due to the ease of installation, operation and safety, Junkers gas water heaters are gaining popularity both in private homes and in ordinary high-rise buildings. Such a device will be very useful in families with small children, because due to frequent shutdowns of hot water supply, the child can get sick, and the constant heating of water on gas stove not very comfortable.
Varieties of columns
All German geysers Junkers are equipped with various types igniter. This is the basis for distinguishing them from each other. Produced geysers in the following versions:
- Junkers V;
- Junkers R;
- Junkers G.
The first type of speakers does not have a burning igniter, so it is ignited using two batteries.
The call column in this case is fully automated and therefore it starts itself, controls the level of water pressure and monitors the pressure in the water supply in order to correctly set the heating mode. It is also equipped with a sensor that will inform the owner at the right time about the malfunctions that have appeared in the column, which will help to eliminate the malfunction as soon as possible and prevent damage to the entire device.
If you look at the customer reviews of this version of the column, we can conclude that its service life is more than 10 years, which is a big plus in comparison with analogues.
Junkers R is equipped with a piezo ignition, that is, the igniter that is installed in the device will be on fire all the time when the device is running. It is not automated, so you have to independently regulate the water pressure in the system.
Type G is equipped with a hydrodynamic generator that ignites the burner (it does not have an igniter). Such a device is capable of operating at a pressure of 0.35 ATM and is equipped with Hydro Power technology. Also this type of Junkers column available in two sizes:
- standard;
- mini.
All components are the same, the difference is only in size.
Advantages and disadvantages
The device has both advantages and disadvantages. The benefits include the following characteristics:
- equipped with flame modulation;
- increased security;
- adaptability for use in Russia;
- beautiful appearance.
Thanks to its design, Junkers will fit perfectly into any interior. The device operates at a gas pressure of 13 Mbar. This pressure is present in all gas pipelines in Russian houses. If we compare it with the European pressure (20 Mbar), then it is much lower, which creates problems when buying other gas water heaters. The device works effectively high-rise building, where the pressure in plumbing system very low (works from 0.1 ATM.)
Junkers has increased safety and low cost in comparison with its counterparts. When the water pressure changes, the device will automatically select the power at which the water heating will be optimal. The device is assembled by German designers and has a 2-year warranty. At correct installation and operation of the device can last more than 13 years.
Among the shortcomings are the fact that Junkers is present in most modifications of geysers elevated level noise. During the operation of the device, problems with the heat exchanger and leaks in the seals appear, which creates a risk of spoiling flooring under the gas column or completely flood the neighbors.
Common breakdowns
Often the device breaks down due to its improper operation. It happens that this happens due to corrosion, poor water quality and power surges. If after the acquisition a marriage was discovered, then it is eliminated free of charge at the service center.
Paid repairs will cost approximately 1500 r. The price depends on the complexity of the damage. It is recommended to take the device to the service yourself in order to save on delivery or calling a private master. Most frequent malfunctions are:
- water leak;
- overheat;
- the occurrence of loud sounds emanating from the device;
- water does not heat up;
- sensor stopped working.
Basically, these breakdowns occur due to the formation of a large layer of scale. In order to repair the device yourself, you need to determine the cause, purchase original spare parts, follow the recommendations of specialists and study the basic rules for repairing this type of boiler.
After repair, it is necessary to make sure that all fastenings of the device are correctly fixed, and during its operation there will be no gas leakage. It is only allowed to repair the device yourself if you have such experience. Only original spare parts purchased from Bosch should be used.
Device cost
The cost of the device depends entirely on the size (standard or mini) and its version (B, P, G). On average, the price for type B varies from 10 to 13 thousand rubles, for type P from 6.8 to 9.7 thousand rubles, for version G from 11 to 12 thousand rubles.
Each device comes with detailed instruction, which describes the technical component of the device, instructions for installing, configuring and caring for it. The manufacturer recommends that you do not install the device yourself, but trust the specialists from the gas service. After all, improper installation can not only break the device, but also cause significant harm to an inept installer.
The device has a large number of positive feedback from satisfied customers. They consider it reliable, safe and affordable.
Geyser Junkers- a technique of German engineers for preparing hot water and facilitating family life. Attractive design and compact design saves space, and make Junkers gas water heaters universal for apartments. The built-in piezo ignition will turn on the device automatically when the water tap is opened. Reliable and safe. The protection is based on a thermoelectric pulse that controls gas formation and, in case of violation, will turn off the igniter.
This automation requires constant supervision by the masters. Failure to follow the rules leads to Junkers geyser stops heating and turns off completely. Black soot falls, red light flashes, does not turn on or pops at startup. Trust the elimination of these breakdowns should be trained craftsmen.
Company "GazService" is an organization for the service of heating and water heating equipment. The advantage of the company is operational junkers gas water heater repair . Response to the application within one hour.
Repair of geysers Junkers in Moscow
The workshop offers an on-site cleaning service, prevention and junkers gas column repair. We cover the districts of Moscow and the Moscow suburbs. The list of works includes the restoration of defective assemblies and faulty components: wick group, block solenoid valves, security automation. Checking the heat exchanger for wear and tear. Flushing the burner, increasing the air flow to increase the heating of the water in winter time. Repair of geysers Junkers (junkers) as part of the technical cleaning. Replacement Supplies and lubrication of jammed mechanisms.
We leave behind a guarantee confirming the presence of the master. We indicate the malfunction of the column, the type of repair and the cost. Repair of geysers Junkers (Junkers) with a departure outside the Moscow Ring Road is paid separately, - 30 rubles = 1 km.
 |
|
Loading...