During long-term use, door leaves and frames lose their attractiveness as a result of wear or expiration of the decorative coating.
Painting a wooden door with your own hands will allow you to save money and acquire skills in installation and finishing work.
In contact with
Classmates
You can also show your creative ideas and perform original painting with visual highlighting of individual parts of the structure.
Types of paints
Currently, there is a huge selection of paints for painting wood. They are qualitatively divided into transparent and opaque. The first option is used if it is necessary to preserve the natural color of the wood and the visibility of the fiber structure. These include stains and impregnations that protect wood from insects and fungi.
Note!
They can add a slight tonality to the natural color, making the appearance more presentable.
The second option - opaque paint is more in demand because it allows you to achieve maximum compliance interior design premises. These can be enamels and compositions based on acrylic, polyurethane, alkyds and oil.
Which paint should I choose?
For interior works acrylic enamels are most often used. They allow you to obtain optimal viscosity for ease of use with a brush: it spreads well, forming a thin, uniform layer and is able to maintain rich color throughout its entire service life. It does not have a strong odor and therefore even allergy sufferers can paint. Paint for external doors is selected based on the temperature characteristics of the climate, air humidity and amount of precipitation. In such cases, alkyd paint is simply irreplaceable, as it increases resistance to temperature changes, moisture and sunlight. Painting can dry much faster than other compositions. However, when working with it you should use individual means respiratory protection because it is toxic.
Before painting, you need to remove the fittings
Preparatory work
Before painting, it is advisable to remove the door from its hinges and place it on a horizontal, stable surface. It is advisable to cover it with paper or oilcloth so that dirt and dust do not get on the canvas. Then, using an industrial hair dryer with a wide nozzle, remove the old paint down to the wood. Use a hot stream of air to heat the old paint until it swells, after which it is easily scraped off. IN hard to reach places The nozzle is removed and the area is heated, after which the paint layer is removed with a knife or small knife. Upon completion of work, grind with sandpaper or.
Should I remove the door or not?
It is convenient to paint the doors in the removed position, since the paint does not run off, drips do not form, and there is access to all the cracks and inconvenient places. You can assess the condition of the canvas more objectively and, if necessary, replace problematic parts. In addition, the room will be free of the pungent smell of solvent, paint and varnish. The time spent on dismantling is completely justified, since financial resources are saved on painting doors that are obviously unsuitable for use, and it will also be possible to carry out work in any convenient place. However, if the canvas is new, and painting is carried out only to change the color shade, then you can paint it right on the spot, having previously fixed the open position of the door.
Irregularities need to be puttied
Repairing small defects in the fabric
Before painting a wooden door, you need to hide possible defects, such as cracks, chips and places affected by pests. Putty is taken and applied to problem areas spatula in small quantities. Then it is carefully leveled. After drying, sanding is carried out using a zero polish. The surface is cleaned with a dry soft cloth to remove dust and then washed. It should be noted that only small defects can be hidden in this way. If there are rotten areas or serious cracks, it is recommended that a suitable piece be made from a similar type of wood and replaced.
What primer should I use?
Wood is absolutely necessary to improve water resistance, increase adhesion, especially dense wood, to impregnate outer layer to reduce paint costs. Before painting an old wooden door with opaque paint, apply alkyd primers and compositions diluted with water for alkyd based.
Note!
The color of the primer should differ from the main color by a tone or semitone in the light side, so as not to affect the external coating.
Under the transparent layer use primers based on oil and water based, having disinfectant, insecticidal and. In terms of color and type, they should have a great affinity with the decorative coating.
Carrying out monochromatic painting
The most simple option is to paint the canvas and the box in the same color. The brush should be fluffed before use to remove excess hair and make it soft. After this, painting is carried out in three stages. At the first stage, cover the ends of the door with a layer of paint, starting from the upper corners and ending with the lower, longitudinal movements of the brush. At the second stage, the plane of the canvas is painted from left to right. The paint should then dry according to the application instructions. After drying, apply a second layer of paint in the longitudinal direction from top to bottom. If the paint is partially absorbed, you can apply a third layer to obtain a rich color.
Applying multiple tones
For interiors with complex decorative elements, several layers may be required. different colors. Take tape and cover the entire surface that should not be covered by the main color. After drying, seal the painted parts and apply paint to the remaining areas. Paint front door In a child's room, several colors are not enough and you have to create complex designs. First, stencils are made with applied adhesive composition on the other side. Painting is carried out in the main color, and when the paint dries, a stencil is installed and painted in additional tones. The disadvantage of this method is that the color of the substrate appears outward. Therefore, they select such patterns so that the background is lighter and subsequent layers are darker. This option is non-standard for painting wooden canvases, since they have a natural pattern, but is the simplest implementation of a complex pattern for doing it yourself. The sequence of work is as follows:
- The canvas is painted completely in yellow by single-color painting in one or two layers.
- Using a brush, apply liquid soap evenly to all surfaces.
- A layer of dark paint is applied to imitate wood fibers.
- The soap is washed off.
Conclusion
Before painting an interior wooden door, you need to determine the operating conditions, requirements for surface quality and color. But before this, the front part of the canvas and the box should be processed accordingly. This will guarantee successful completion of the work and will significantly increase the service life of the door.
How to properly paint a wooden door video:
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!
This procedure will help protect the wooden canvas from rapid wear and the harmful effects of the environment.
How to paint wooden doors: choice of paint
You are about to paint the door leaf, and the first question that arises is: what paint to choose? After all, not only the appearance of the door itself and the quality of its protection depend on this, but also the persistent smell that will remain after it. Therefore, this issue must be approached very seriously.
All paints can be divided into transparent and opaque.
The first are paints containing special pigments that allow the natural structure of wood to appear when applied.
The second includes compositions made on the basis of organic solvents - oil, alkyd and others.
The most popular is alkyd enamel. She got wide application thanks to affordable price, a wide variety of colors and good durability.
Painting technology
There are several various options painting wood panels.
So, solid wood doors for painting must first be prepared by applying putty and primer, and then proceed to painting.
Impregnation with tinting composition.
For it, it is advisable to choose paints made from natural oils.
The composition is applied directly to the surface large area, and then run over it 10-12 times with a rubber spatula.
You can apply the same composition in another way, using a sponge. It is dipped into the composition, and, pressing firmly, it is carried along the fibers. Such movements are performed for 2-3 minutes.
For the second option You will need paint and liquid soap. A layer of paint is applied, and after it dries, liquid soap is applied to it. Then re-painting is carried out.
Another technology will require paint and yacht varnish. The work is carried out sequentially, as in the above described option.
How to paint it correctly?
Before painting the surface, it is necessary to prepare wooden doors for painting and perform a number of preparatory steps.
Since coloring vertical surfaces associated with the formation of smudges, the doors must be removed and placed horizontally.
Before painting a new wooden door, we prepare all the materials and tools necessary for this. Painting can be done with a roller and brushes.
A roller is needed for painting flat surfaces, and a brush is needed for painting a relief pattern.
Then inspect the canvas for any defects.
If there are peeling areas on it old paint, then it must be carefully removed. Then carry out puttying work, sealing all existing irregularities and cracks. After the putty has hardened, it must be cleaned with emery cloth.
Wipe the canvas with a damp cloth to remove dust and putty particles.
The painting process itself can be performed in two ways:
- using a sprayer;
- using a roller and brushes.
If you decide to use the second option, then after applying the paint with a brush, you need to rub it using a gauze swab. This will help achieve uniform distribution over the entire surface and obtain a better appearance.
The house is being renovated and the question arises whether to buy new doors or restore and update the old ones. How to paint a wooden door to make it look like new? If you are committed to dramatic changes, then it makes sense to buy new door. But you need to take into account that in order for the room to look harmonious, you will have to change everything interior doors. Painting wooden doors requires certain investments. But you can try to restore the former attractiveness of old door panels if you have the desire, time and certain skills. So, how to repaint interior doors.
Range paint and varnish materials allows you to transform any door. Main types of wooden panels:
- Solid wood door. Solid wood consists of tightly fitted and glued boards (boards), which is why they are called panel boards, also solid wood sometimes bleached.
- The frame-bearing part is made of wood, and multi-layer plywood or fiberboard is inserted between the bases. Such doors are usually called panel doors. They are visually different in that the wooden parts are thicker, and the inserts are thinner and look like blind windows.
- Veneered doors. The frame part is made of wooden planks or MDF. MDF board is wood shavings, crushed almost to a dispersion composition and pressed using a vacuum method. Under the influence of vacuum pressure, adhesive resins are released from the chips. The result is a dense slab. In fact, this is also wood, but made from waste from solid wood processing. The top of the slab is covered with a layer of veneer (a thin cut of wood).
- Canvases made of fibreboard. Fiberboard It is wood shavings glued together using hot pressing. The top of the plate is covered with a thin layer of polymer film.
Therefore, before painting interior doors, it is necessary to take into account the characteristics of the material. Painting old panel doors is a little more difficult than painting doors made of solid wood.
Types of paint and varnish coatings
Painting interior doors requires certain stages of preparation and an idea of the types paint and varnish coatings. Manufacturers offer a fairly wide range of paint coatings for wood and its derivatives. In general, they can be divided into: wood paints, various types of varnishes and coatings, impregnations, and tinting agents.
Wood paints
How to decide what to paint interior wooden doors with. It is necessary to familiarize yourself with the main types of paint products. It is important to consider the following factors:
- what is the array made of?
- whether these surfaces have been previously coated;
- is there any in the room high humidity air and temperature changes;
- operational loads, that is, how often the doors will be subjected to mechanical impact. For example, you cannot compare the load of linens that are in the kitchen or bathroom small apartment, with doors to a bedroom in a large house.
On video: acrylate paint for doors.
Based on the above, we choose what to paint wooden doors with.
Basic properties of wood paints
You can paint an interior door only after deciding what paint to paint, what color, and what to paint the door with. Natural wood can be coated with clear varnish or tinting agents in order to preserve the natural texture of the wood.
Wood paints:
- Quick-drying enamel is nitroenamel obtained by chemically treating cellulose nitrate with nitric acid. It lays well on the surface, creating an even layer, and dries within half an hour. The main disadvantage is the rather pungent odor and toxicity. Therefore, this type of coating should be used, if possible, in a well-ventilated, isolated room. It is better to process the canvas outdoors.
- Alkyd enamels are produced based on alkyd varnish or resins. The composition includes various additives and solvents. Alkyd resins form a moisture-resistant film, so they can be used for wet rooms and external door panels.
- Acrylic paints the most harmless, have almost no characteristic odor. They contain polymers (polyacrylates, copolymers) mixed with a water-dispersed solution. They mix well with various pigments. Thanks to this, you can achieve any color and shade. Copolymers form a film after drying that protects the surface.
Previously, oil paints were often used, but now they are giving way to the above-mentioned paints. Nitroenamel and alkyd coatings penetrate deeper into the layers of wood and are resistant to aggressive external influences and moisture. Have a wide color scheme. Therefore, it is fashionable to use them for bathrooms, kitchens, and external doors.
Acrylic paint is often used to coat interior doors. To enhance the protective and aesthetic properties, you can apply a layer of varnish on top.
Varnishes and tinting products
For wooden doors from natural massif In order to preserve the natural beauty of the wood structure, various varnishes, tinting stains and wax impregnations are used. Stains deeply impregnate the wood and give it a certain shade, while maintaining the structure. Transparent varnishes perform a protective and aesthetic function. Perfectly highlight natural beauty natural wood.
On video: how to cover wood.
Door painting
How to paint doors? First you need to decide how to paint a wooden door, what color it will be. An important role is played by the interior of the room, in what conditions the canvas will be used. For example, white canvases are suitable for interiors in light colors. Dark and brown accents are used. They must match the color of the floor, stretch ceiling, furniture.
But how to repaint wooden panels so that they become snow-white. To do this, use a white primer as a base. To repaint doors you need to adhere to a certain technology.
How to beautifully paint interior doors? First, the canvas needs to be removed from its hinges and placed on stands. Stools are most often used for these purposes. A painted door that is mounted on permanent hinges and cannot be dismantled must be fixed. Door locks, handles, and latches must be removed or sealed with masking tape.
Prepare as follows:
- First, remove the remaining old paint. For these purposes, use a hair dryer or a regular blowtorch. Old wood door paint begins to bubble and peel. Clean the surface using a metal spatula.
- Then the surface is cleaned with coarse sandpaper. You can use a grinder or grinder with special attachments.
- Prime the canvas with a special primer for wood. Seal cracks and smooth out unevenness. If they paint a door in White color, then it is better to use a white or colorless primer.
- Allow the primer to completely absorb and dry. Then clean with fine-grained sandpaper or attachments on an angle grinder.
This must be done before painting the interior doors.
What and how to paint a wooden door correctly? Paint the door leaf using a paint brush, roller or spray gun.
Painting should be done in a well-ventilated area or outside, if it is possible to dismantle it.
Array
How to beautifully paint interior doors::
- The surface is cleaned of traces of dust and primed after cleaning.
- Glued masking tape in areas that do not need to be painted.
- It is better to paint with a roller. The areas around the lock and handles are carefully painted with a brush. Apply paint in 2 layers. Apply the second one when the first one dries.
- The masking tape must be removed after the second painting, before the paint dries.
In order for the layers to lay evenly, it is necessary to apply the second layer in the opposite direction relative to the first.
Paneled doors
These canvases are best painted using a brush and roller. To paint wooden doors, you need to follow the following sequence:
- First, use a brush to paint over convex and uneven areas.
- The entire canvas is covered with a roller using a coloring composition. Allow to dry, then apply a second layer.
- When using one paint brush Each layer is painted in the opposite direction relative to the previous one.
- The painted door is left to dry completely, then installed in place.
MDF, fiberboard doors
We clean these sheets with great care so that the film or veneer does not peel off. IN in this case You cannot use a hot hairdryer. If the film has peeled off in some places, it needs to be repaired. In order not to tear the film, you can introduce glue using a syringe and press this place well. After this, we paint the surface according to the same scheme as described above.
You can paint the door leaf at home in any color. Technical capabilities And color palette modern paintwork allows you to decorate them depending on the intended design. If we varnish the canvas on top, it becomes less vulnerable to the influence of the external environment. They look more beautiful.
It is not recommended to repaint door panels without removing the old paint or other coating. The doors will not look attractive from an aesthetic point of view; unevenness and peeling may occur.
How to restore a lacquered door
If the door has been painted with varnish, it must be cleaned. Remove it using abrasive materials, that is, sandpaper, an angle grinder with attachments, or a sander.
With help special technology wood can be given an aged look and its structure can be emphasized. To do this, it is initially brushed, that is, as if combed with a special metal brush along the fiber structure. Clean, then impregnate the recesses wax impregnations or stain. Sand and apply layers of varnish.
When painting canvases that cannot be dismantled, it is better to start painting from the bottom to avoid smudges. The paint is applied in a thin layer to the surface to be coated.
So, you can update the door leaf at home yourself. Do-it-yourself painting of doors in an apartment is interesting and useful process. You will not only restore the canvas, but you will be proud that it was painted with your own hands.
Painting wooden windows and doors (1 video)
Many people think about what color to paint interior doors when starting renovations. After all, the entire interior should be harmonious. And we’ll look at how to paint interior doors today.
In this matter, it is important to initially decide on their appearance. After all, there are many finishing options, and the photos and videos in this article will help with this.
Painting interior doors
There are many different coloring compositions wooden surfaces(see Which paint is better to paint wood: making a choice). First of all, you need to determine what paint to paint the interior doors. After all, they are different in their composition and characteristics.
It can also be a dense, saturated layer. But if you wish, you can apply a thin transparent layer of coating and simply highlight the structure of the wood. Everything can be done with your own hands and the final price will not scare you.
How to paint doors
For creating good coverage you need to choose the composition, and this depends on you personally.
In this question, you need to understand what kind of coverage you want to see:
- Creates a dense, opaque coating. These are thick enamels and paints with a base of liquid acrylic, polyurethane, perchlorovinyl. This group also includes quite rare, outdated oil-based formulations.
- Toning compounds. These are various impregnations that penetrate deep into the layers of wood, and not only give it a certain shade, but also protect it from destructive external influences.
- Transparent coatings. These are a variety of varnishes, both glossy and matte, that cover the surface of the wood with a transparent layer that protects the wood from moisture.
For home use, professional painters recommend using easy-to-apply compositions, such as:
- Water-based acrylic dyes. They have the best consistency for painting with a brush, good adhesion and excellent covering ability. Acrylic paints are only slightly inferior oil paints in its surface spreadability, which is another advantage of these coatings.
- Alkyd-based paints and varnishes. They dry quickly, are not affected by temperature fluctuations, and repel liquids well, protecting the wooden surface.
When installing new wooden doors in a bathhouse, you should immediately take care to protect them from negative impact. Steam, heat, drafts from ventilation contribute to the deterioration of wood, its deformation and loss of visual appeal. Painting the doors will help you avoid this - a simple and effective method. The most important thing is to choose the right paint and apply it correctly.
Paint and varnish products are classified as follows:
- by type – varnishes, paints and impregnations (oil, wax, stains, penetrating and film-forming);
- By chemical composition– organic and water based;
- by method of application – internal, external and combined;
- in terms of protective effects - from temperature and humidity fluctuations, from mechanical damage, from chemical and organic irritants.
In addition, all coatings are divided into transparent and opaque. The first includes varnishes, glazes and oil impregnations, the second includes paints and enamels made on acrylic, alkyd, polyurethane and oil bases.
| Type of wood processing compound | Basic properties |
|---|---|
| Suitable for painting interior and exterior doors, has high moisture resistance. Transparent, emphasizes the structure of the wood. Disadvantage: long drying time. | |
| Safe for health, suitable for any wood, quick-drying. Provides high protection from ultraviolet radiation, gives the surface increased resistance to dirt and moisture. | |
| The most harmless to health, non-flammable, used indoors. Not suitable for external doors. Preserves the natural texture of wood and its original color. | |
| Easy to apply, penetrates the wood well, gives the wood a darker shade. Used for treatment before painting. | |
| Penetrates deeply into wood, perfectly protects against moisture, fungus and dirt. Gives additional strength and a pleasant shine to the surface. | |
| It is used for external and internal surfaces, creating a durable, dense coating with water-repellent properties. Has high hiding power with a glossy or matte effect. | |
| It is easy to apply, has low hiding power, thanks to which it preserves the texture of the wood. It has high breathability, so it allows the wood to “breathe”. |
Opaque paint for bath doors it is used less often, since the natural grain of the wood fits more harmoniously into the interior. Traditionally interior decoration Baths are made of wood, so doors with a pronounced texture look better.
But if tiles are used to decorate the walls, you can make the doors plain by choosing the appropriate color.
When using paint, pre-treatment of the surface with antiseptic impregnation and fire retardant is required if the door is in a steam room. It is advisable to choose all products from one manufacturer, this will improve their interaction and make the coating better.
The optimal choice for bath doors are alkyd-based varnishes and paints, the main advantage of which is considered to be resistance to temperature fluctuations and water resistance.
And one more thing: paint and varnish products should be purchased only in specialized stores where storage conditions are observed, especially temperature conditions.
Wood varnish prices
wood varnish
How to paint new doors
Untreated wood absorbs moisture well, and if new doors are installed in the bathhouse without impregnation protective compounds, they will very soon swell and stop closing tightly. Therefore, before installing the doors, they need to be properly prepared and painted. All work should be done indoors to prevent dust from getting on the paint.
Step 1. The door leaf without handles, hooks and loops is laid on a flat, stable surface. During the manufacturing process, the material was already amenable to grinding, but small roughness or protrusions could remain. Therefore, using a grinder or sandpaper, the doors are processed again on both sides and at the ends. Remove any uneven surfaces and wipe off any dust.
Step 2. If paint is chosen for the doors, the canvas is first impregnated with a primer. The recesses are treated first, then the flat areas. Since the doors are in horizontal position, drips do not form, and absorption occurs more evenly.
Step 3. Allow the surface to dry completely and treat it a second time.
Step 4. Now you can paint. For panel door A roller is more suitable; for paneled, use a narrow brush. The paint should not be too thick; if so, thin it with solvent. You should not apply the paint in a thick layer, as this will only reduce the quality of the coating. Depending on the coverage, you may need from 2 to 4 layers of paint, each of which must dry completely before applying the next.
Step 5. While the door dries, paint the opening. You can’t leave it untreated for the same reason as doors, and besides, painted door it doesn’t look very harmonious in an unpainted opening.
After the paint has dried, the hinges, handle, and hook are screwed onto the door and installed in the opening.
If stain is chosen for the door, no primer is used. The stain penetrates deeply into the wood, coloring the fibers and increasing the protective properties of the material. There are several ways to apply stain, which give different results.
| Way | Description |
|---|---|
| Trituration. | This method requires a stain with for a long time drying. Using a roller, apply the composition to the door leaf and rub it thoroughly with a foam swab or a piece of thick fabric. You need to rub with force, centimeter by centimeter, so that the liquid penetrates well into the pores of the wood. The painted surface has a very pronounced pattern. |
| Spraying. | The stain is chosen in light colors and 2-4 layers are applied using a spray gun. This method of painting gives a less pronounced texture, but perfectly hides minor wood defects. |
| Regular application. | Suitable for flat surfaces. The stain is applied using a roller, resulting in the surface being painted evenly and without streaks. |
| Staining with a brush. | The product is generously applied using a wide brush, first along the fibers, then across. Thanks to this method, the wood acquires a deeper and richer shade. |
Advice. To avoid discrepancies in color, stain should be purchased in reserve and mixed well in the jar before use. Coloring pigments tend to settle to the bottom, as a result of which when painting doors, one part may differ in tone from the rest.
Prices for stain
wood stain
Using oil or wax impregnation
Treating doors with oil impregnation also has its secrets. If applied incorrectly, streaks and darker areas may appear on the surface. Before use, the impregnation must be stirred very well, and this must be done several times during the work process. Apply impregnation in any convenient way - roller, brush, spray or foam sponge. The number of layers depends on the porosity of the material.
So, take a little product and distribute it evenly over the surface from edge to edge. It is more convenient to do this according to the width of the door leaf. Next, the impregnation is thoroughly rubbed with a brush or rolled out with a roller, avoiding sagging. The surface dries in 8 to 12 hours, depending on the composition and air temperature. The second layer is applied no later than 24 hours later, otherwise it will not be able to absorb well and its protective properties will decrease.
Wood impregnation prices
impregnation for wood
Painting old doors
Old doors in a bathhouse can also be revived and made no less attractive than new ones. Although this process is more labor-intensive, anyone can handle it. For convenience, the door must be removed from its hinges and laid horizontally, but if for some reason it cannot be removed, you will have to work this way.
Step 1. The door leaf is removed from its hinges and laid on flat surface. Unscrew handles, hinges, remove locks. If you can’t unscrew them, wrap them with tape or foil.
Step 2. Using an abrasive attachment, remove all layers of old paint to the base.
If there are putty areas, the putty is also completely cleaned off. There is one more convenient way remove paint: upper layer coatings are heated construction hairdryer until the paint begins to swell, and then scrape it off with a metal spatula.
Step 3. Sweep away pieces of paint and dust from the canvas, and then carefully sand the surface. In hard-to-reach places it is convenient to use sandpaper. After sanding there should be no rough areas, small irregularities or scratches.
Sanding the door leaf
Step 4. Carefully inspect the door from all sides, check the tightness of the connections, and, if necessary, strengthen the frame metal corners and self-tapping screws.
Step 5. The resulting recesses and cracks must be repaired with new putty. Under alkyd paint The putty will work in any color, but it won’t show through anyway. If you plan to treat the surface with oil impregnation, wax or varnish, the shade of the putty should match the color of the door leaf.
Advice. If the wood has become very dark over time, you can bleach it a little: mix bleach with water in a ratio of 1:3 and moisten the surface generously. When it brightens, the door is washed well clean water and air dry.
Sanding dried putty
Step 8. Use a damp cloth to wipe off dust from all sides. Next, cover the door with an even layer of primer. Instead of a regular primer, you can use an antiseptic impregnation. Joints and recesses need to be treated especially carefully.
Step 9 For painting you will need a thin brush and roller.
When the primer has dried, take a brush and first paint all the lintels, recesses, decorative overlays, and panels. Next, using a roller, smooth, wide areas are painted.
The paint is applied in a thin and even layer, carefully rubbed in one direction. The second layer can be applied no earlier than the first has dried. In this case, the top layer is always applied perpendicular to the bottom one, that is, if the first layer was applied along the width of the doors, then the second one must be done longitudinally. It is especially important to follow this rule when using a brush that leaves strokes.
Step 10. Leave the canvas to dry and begin painting. door frame in the doorway. It’s exactly the same here: use a thin brush on the joints, and a roller on smooth areas.
Wood paint prices
wood paint
If the door cannot be removed from its hinges, for convenience it is fixed with wooden wedges on both sides so that there is maximum access to all parts of the door. The wedges should be secured as firmly as possible, otherwise the blade may move during operation. All further actions are performed similarly. When painting, be careful not to allow drips to form. Handles and hinges, and other fittings should also be cleaned of dirt, sanded, and lubricated for ease of movement.
When treating doors with stain, you should take into account that splashes that fall on clean wood leave dark spots that are visible through 2-3 layers of dye. Therefore, if you are painting a door that has not been removed from its hinges, it is recommended to apply the stain very carefully and from the bottom up. The roller or brush should not be dipped into the liquid too much to avoid drips. A canvas with streaks and dark spots looks sloppy even under a layer of varnish.
When using a water-based stain, wood fibers tend to straighten, causing the surface to become rough. Sanding with fine-grain sandpaper will help eliminate such a defect. After secondary treatment with stain, the canvas remains smooth.
Video – Painting wooden doors
Video - Door painting technology
Loading...