Enamel facade paint for wooden surfaces. Facade paint for wood: oil-based compositions, acrylic, silicone, alkyd. Varieties of facade paints

Regardless of the appearance of various materials on the construction market, wooden buildings remain at the peak of popularity. In such houses, the microclimate is better, and their construction is sometimes easier than, for example, brick ones. But to maintain an attractive appearance, the tree needs additional processing. Most often, facade paint on wood is used for this process. At the moment, there are a great many such coatings, so it’s worth understanding all the diversity presented.

Varieties of facade paints

The main function of coating a wooden house with paint and varnish material, in addition to the aesthetic component, is to increase the resistance of wood to external influences and increase its service life. The right choice of facade paint is able to perform these two functions at the same time. So, facade paints for wood, intended for outdoor use, are of the following types:

Advantages and disadvantages of facade paints

Each paint has both its positive and negative qualities, so it is worth considering these features depending on the type of solution.

Acrylic is distinguished by a high percentage of environmental friendliness and protects the surface much better from the adverse effects of the environment, due to the formation of a kind of film on the surface, from which moisture evaporates during drying. It became popular due to another quality of the resulting layer - strength. Because of this, it does not crack throughout the entire service life, even with a strong temperature difference.

Due to its low cost and wide range of uses, alkyd paint is chosen by many. It can be used to paint some elements of the house, for example, such as frames, front doors, platbands. It is very important that the surface to be painted is as dry as possible. Otherwise, the resulting layer will crack very quickly and become unusable.

For a long time, until there were no other types, oil paints were very popular. At the moment, facades are painted with them less and less, since such a solution has poor adhesion with other paint materials. If the surface is covered with oil paint, then it will not work to update it with another paint and varnish substance. In addition, it dries for a long time and has a very sharp and unpleasant odor.

Facade paint selection criteria

For a wooden facade, one should select the composition that is not afraid of exposure to moisture, temperature extremes and direct sunlight. The surface must be vapor-permeable so that the house has the opportunity to "breathe". Facade paint on wood in any case should have a high degree of adhesion not only with wood, but also with other paints and varnishes. An additional plus will be the protection of the tree from fungus and mold.

Most often, acrylic compositions are chosen for a wooden facade, which will retain their properties throughout the entire period of operation. At the moment, this paint and varnish material is presented in a large assortment on the construction market. When choosing, you should decide on the necessary properties of the paint and shade. It would also be useful to clarify the service life and compare it with that which is planned. Be sure to find out in advance whether the paint can be applied to an already painted surface and hide small defects. For wood structures, fire retardant wood paint is often chosen.

Popular manufacturers and prices

At the moment, as mentioned, there are many types of wood facade compositions on the market from a wide variety of manufacturers. Here are the most popular ones:

It is also impossible not to mention the Russian-made Soppka fire-retardant paint. Such a composition protects the wood not only from the spread of fire, but also from the effects of fungus and mold, acting as an antiseptic.

One can cite as an example the domestic paint Olimp, which is made on the basis of linseed oil, which additionally strengthens the wood surface. This paint is alkyd and combines high quality and affordable cost.

Application of facade paint

In order for the finished layer to serve for a long time, it is necessary to apply it correctly. In this process, the following rules should be followed:

• Preliminary cleaning of the surface from the old coating and complete drying.
• Mandatory mixing of paint before application.
• The application is made in several layers. How many there will be depends on the type of paint and varnish product and surface.
• With a high density of paint, it is diluted with a solvent.
• The paint must be given the necessary time to dry. As a rule, 1 layer on the surface dries for 4 hours.
• Painting works can be carried out at a temperature range from -10 to +55 degrees Celsius.

Technology of staining with water-based and acrylic paints

First you need to carefully prepare the surface for application. To do this, the old layer is removed and excess dust and dirt are removed from the surface with a stiff brush. From mold and moss, a special cleaning solution is used. If there are visible defects on the surface, then they are treated with a grinder or sandpaper.

Advice! It is best to treat the surface with a primer with an antiseptic effect.

After preparation, wood paint for outdoor use is diluted with a solvent as needed and applied to the surface. The drying time of one layer is from 2 to 4 hours. If the paint has not run out, then it is forbidden to store it at a negative temperature, so it is better to bring the solution into the house or garage.

Application of alkyd paint

This type of coloring agent should also be applied to a prepared and completely cleaned surface. Wood must be coated with a primer. As previously mentioned, this paint is applied only to a dry surface to avoid cracking.

Applying oil paint

At the first stage, it is also worth preparing the surface in advance. The paint is diluted to the desired consistency with drying oil. It is very convenient that this type of paint can be applied at low negative ambient temperatures. Complete drying of the oil layer of paint occurs after at least 24 hours.

Important! To increase the life of the finished layer, you can apply a layer of oil varnish on it.

Store unused paint only in a tightly closed container in a dry and dark place.

Often, the desire of the consumer to purchase a durable and environmentally friendly paint for painting a wooden facade is not fulfilled. Paint, the object of which is the facade of the building or other wooden exterior elements, should not lose their qualities under the influence of temperature changes and moisture.

Manufacturers are not always to blame for the imminent loss of attractiveness. Very often, the consumer himself is poorly aware of the technology for applying a coloring matter to a wooden surface.

Is it possible to paint a wooden house with facade paint?

The answer to this question is unambiguously positive, only in the process of application it is necessary to follow a certain technology. This will guarantee the durability of the painted coating.

According to facade paint manufacturers, the coating remains unchanged for about two decades. But in practice, after a couple of years, cracks and chips can be seen on the painted surface.

Exterior paint for wooden surfaces should not only be applied to the primer layer. An antiseptic (antiseptic primer) provides protection for the wood itself, but does not increase the life of the painted surface in any way. The paint should be applied over an alkyd primer to increase adhesion to the surface.

Is it possible to paint wood with facade paint while preserving the natural structure? The color of the surface can be more or less dense, it depends on the chosen paint.

For a dense and opaque coating that completely hides the wood texture, use:

• Oil paints;
• Alkyd enamels;
• Acrylic paints.

If it is necessary to emphasize the wooden facade, preference should be given to varnish or antiseptics with the addition of color.

Modern coloring compositions are elastic and allow the wood to breathe. Oil formulations should be selected a couple of shades lighter than desired, they tend to darken over the years. Acrylic analogs are universal in application. Their successful application is possible both outside and inside the premises. Enamel will allow the wooden surface to retain all its properties, in addition to a glossy or matte surface.

If the house is a new building, the elasticity of modern coloring compositions will allow them to endure the shrinkage of the building without chips and cracks.

Some rules for applying facade paint to a wooden surface

• Be sure to use an adhesive primer. If its use is not possible for any reason, for better adhesion of the paint to the wood (after applying the primer), the surface must be sanded. To do this, use sandpaper or a grinder.
• The use of an antiseptic. A wooden building is exposed to fungus, mold and all kinds of beetles. To protect the wood and preserve the shade of the paint, the use of an antiseptic coating is mandatory.
• New building painting times. Not every built house can be painted immediately, despite the elasticity of modern paint. This is due to the fact that the wood needs to dry out from natural moisture. Only in cases where construction is carried out with the use of glued beams, painting is possible upon completion of construction work.
• Application technique. The process uses a wide brush, which is carried out strictly along the wood pattern. The end sides are treated with sealant.
• Working conditions. Painting the facade of a wooden building should only be done in warm and dry weather. This will ensure the durability of the coating.

Additional processing of natural wood will significantly increase its service life. What dyes are recommended for processing a wooden facade and how effectively do they cope with their task?

Types of paints

The wooden facade needs additional protection. The modern market is replete with paints and varnishes, which causes difficulties for buyers. Proper selection of paint will not only transform the structure, but also extend the life of the wood.

High-quality paint for the treatment of wooden surfaces should perform the following functions:

• minimization of cracks and deformations;
• masking the loss of the natural color of the tree;
• giving a shade to a wooden coating;
• protection of the product from external factors;
• minimizing the occurrence of mold, fungus and other negative phenomena.

Colorless varnishes and paints

Transparent coatings will be a good solution for those owners of wooden houses who want to emphasize the natural color of the wood.

Among obvious benefits colorless dye, it is necessary to highlight the following:

• Vapor permeability- dyes of this type effectively remove excess flag from the wood, minimizing the risk of mold and fungus.
• UV protection- colorless varnishes and paints adequately perform the function of an ultraviolet filter, protecting the wooden coating from the harmful effects of sunlight.
• Practicality– re-treatment of the surface is necessary after 3 years without first removing the previous layer of paint.

Water-dispersion

Water-dispersion paints are in great demand both on the Russian and European markets. Abroad, their share reaches 82% from the entire production of paints and varnishes.

The popularity of the dye is due to its merits. Among them are the following:

• Wide color palette- water-dispersion paints are presented in various colors, which will allow you to embody the most daring design decisions.
• Coating durability- thanks to high-quality pigments, the dye will last a long time: from 4 to 8 years.
• Environmental friendliness– thanks to the unique production technology, the coating does not harm human health. Often it is used even for finishing children's institutions.
• Protective properties- the coating is distinguished by weather, water and color resistance. Moreover, water-dispersion paints are characterized by water resistance, vapor permeability and resistance to low temperatures.

As for the disadvantages the dye is not intended for work at sub-zero temperatures. The composition of the coating includes water, under the influence of severe frost, the paint peels off during application.

Another disadvantage of the dye is its price.. The cost of water-dispersion paints is several times higher than the pricing policy of other products on the market. But in return, users receive a dye with high quality characteristics.

Opaque enamels

Opaque enamels based on organic solvents occupied a leading position in the market a few years ago. With the advent of water-dispersion dyes, enamels were somewhat crowded out.

Among the advantages of the dye, one can note the democratic cost and a variable palette of colors.

Note! Among the varieties of opaque enamels, only polyurethane dyes differ in durability. However, their toxicity is as high as their durability.

The main disadvantage of opaque enamels is their toxicity, fire hazard and low level of resistance to external influences. Moisture and temperature changes provoke severe wear of the coating.

Technology for painting a wooden house

Painting the facade is a responsible task. If you follow the step-by-step recommendations, the procedure will not cause difficulties even for inexperienced users.

Removing old paint

This is one of the fundamentally important stages when repainting the facade. Ignoring the procedure will cause the new coating to peel off along with the old paint particles.

There are several alternative ways to remove the old coating. Among them are the following:

• mechanical cleaning. The technique is effective in cleaning a flat and smooth surface. A scraper or grinder will get rid of only a thin layer of old paint.

Note! To minimize the time spent when processing the facade with a spatula or grinder, it is recommended to preheat the surface in advance with a building hair dryer.

• Chemical cleaning. The technique consists in applying a chemical substance to the facade of the house, which can soften up to 9 layers of old paint. In the future, the old coating and the remnants of the substance are removed with water and a stiff brush.

Note! The modern market offers the buyer environmentally friendly compounds for removing old coatings. The harmful effects of the substance on the human body are minimized.

• Hydro jet cleaning. A special apparatus that provides strong water pressure in the shortest possible time will get rid of the old coating. Before applying a new paint, the surface of the facade is recommended to dry thoroughly.

Sanding and putty

To extend the service life new paint, the old coating must be sanded using a grinder or disc drill.

Note! Sanding of wood is recommended to be carried out in the direction of the fibers. Otherwise, scratches and other damage will remain on the coating.

Puttying is an equally important step in preparing the coating for painting. The procedure will allow eliminate bumps and gaps which may be visible when a new coating is applied.

The application technology is simple and straightforward. The sanding must be applied in a thin layer to the damaged areas of the wood and dried before further processing.

Note! Sanding of wood must be carried out using oil or adhesive putty. A material of this type has proven in practice to be resistant to moisture and other adverse environmental factors.

Treatment

The wooden facade is exposed to external factors. For protection of the coating from fungi, mold, excessive moisture and insects wood must be treated with a primer antiseptic.

Note! For outdoor wood processing, it is recommended to give preference to mixtures characterized by water-repellent and protective properties. We are talking about antiseptics on a water-dispersion basis. The colorless "North Antiseptic Primer" received good reviews.

For quality surface treatment several important rules must be followed. Among them are the following:

• The mixture must be applied to a dry and clean surface. Otherwise, the primer will not be absorbed enough, and, accordingly, the protective properties of the mixture will not fully operate.
• Water-dispersion mixtures need optimal temperature conditions: +10⁰С. If the application rules are ignored, there is a high risk of violating the chemical properties of the substance.
• Surface treatment should begin with damaged areas, cuts and ends. Particular attention is recommended to be paid to places where wood comes into contact with metal surfaces. These areas are more likely to develop mold.

Coloring

Upon completion of preparatory work you can safely proceed to painting the facade. Subject to the coating technique, the procedure will not cause difficulties even for non-sweating users:

• paint needed pour into a special container for ease of application. The mixture is recommended to mix thoroughly. In the event that the coating is too thick, it must be diluted with a solvent (no more than 10% of the total mass of the paint).
• The roller must be dipped into a container of paint and removing excess coating from the tool Apply it to the facade in the direction of the fibers. For subsequent application, it is recommended to cover 3 cm of the previous strip.

Note! Painting must begin with the corners of the building, painting them very carefully. It is necessary to complete the procedure by applying a coating to the basement of the building, as excess paint will flow down.

• One hour or one day (depending on the recommendations of the paint manufacturer) after the first coat need to apply the final layer. In accordance with the technology, it is recommended to apply it with undiluted paint.

Note! Painting the facade is not recommended in rainy or too sunny weather. A dry, medium cloudy day is ideal for work.

Main manufacturers

The modern market is full of manufacturers offering various types of dyes for coloring wood. What are the features of modern coatings and how not to make a mistake when choosing a quality dye.

Belinka

Belinka, a manufacturer from Slovenia, which is widely represented on the domestic market. The company offers customers both colorless dyes that enhance the natural shade of wood, and a coating with a variety of colors.

Belinka's products effectively protects wood from sunlight, fungus and insects.

Usage impressions: when painting, a large consumption of paint was recorded. It is recommended to apply the coating in one layer, otherwise the joints will be visible, even if the first layer was applied 2-3 hours ago.

Tikkurila (Tikkurila)

Tikkurila is a Finnish dye manufacturer that has received many accolades from country house owners. Company products are characterized by worthy European quality. The cost of Tikkurila dyes is in a more expensive price range compared to competitors.

Note! Among the company's products, it is necessary to highlight the Ultra Classic coating. The dye is designed specifically for a sharp temperature drop. The product adequately showed itself in conditions of severe frosts.

Usage impressions: The Finnish manufacturer lived up to expectations. The dye lasted 5 years. During the period of "existence" the paint has retained a rich shade, the first sign of destruction was a fine mesh on the coating.

Alpina (ALPINA)

Manufacturer Alpina pampers customers a wide selection of dyes and regular updating of the line. Inexpensive Alpina coatings compete with more "promoted" manufacturers.

Dyes protect wood from mold, fungi and exposure to sunlight. The manufacturer provides a computerized coloring service.

Usage impressions: wood absorbs paint like a sponge. The consumption of the coating directly depends on how well the pre-treatment of the facade was carried out. The dye really has a water-repellent effect, drops of water flow down the coating. The only downside is water stains.

Neomid (NEOMID)

Neomid is a manufacturer of budget dyes, which are characterized by environmental friendliness, resistance to sunlight and precipitation. The indisputable advantage of the coating is a small consumption of material.

Application impressions: The first thing that attracts attention is the low price of the product. Under low temperature conditions, the coating showed itself poorly. In some areas of the facade, the protective film was damaged, peeling appeared.

SENEZH

SNEZH - manufacturer of dyes, focused on construction companies. Products provide wood stability from fire, protect the coating from insects. In the price / quality ratio, the advantage in favor of the price is obvious.

Application impressions: dyes SNEZH left an unpleasant impression. The coating is not adapted to precipitation, after a year the dye washed out, creating an uneven shade. SNEZH products are designed for interior decoration, where there is no high humidity.

TEKNOS (Teknos)

Teknos is enough expensive dyes, but the price is fully justified. The coating is used in the construction industry, mainly for finishing prestigious buildings.

Dyes are characterized by high resistance to external influences, temperature changes, moisture, mold and fungi. The protective film is resistant to abrasion and impresses with its dirt-repellent properties.

Application impressions: when applied, the composition lies flat, does not fade under direct sunlight. The coating was applied in one layer more than 6 years ago. To date, there has been no damage to the façade.

ROGNED

ROGENDA is a worthy manufacturer of dyes, which uses both domestic and foreign technologies.

Today ROGENDA occupies a leading position in the market offering high strength products. Accordingly, the price of dyes corresponds to their quality characteristics.

Application impressions: the colorant is quickly absorbed, which confirms the good penetration of the coating into the upper layers of the wood. During 4 years of operation, the color of the facade remained saturated. The only drawback of the coating is an unpleasant smell when stained.

Zobel

ZOBEL is a German manufacturer offering the highest quality dyes. Coatings adapted to extreme operating conditions, durability of paint is guaranteed for a period of 5 to 7 years.

Application impressions: the dye is convenient, economical when applied. After 5 years of operation, significant damage and deformation were not found, in some areas of the facade there is slight peeling. In general, the high cost of the composition is justified.

Dulux

Dulux dyes are produced in more than 100 countries, where they are recognized one of the best coatings for wood surface protection. The high class of the dye has been noted at international exhibitions, by ordinary users and reputable construction companies.

Application impressions: the dye is applied to the wooden pediment, which constantly "suffers" from snow and melt water. For three years of operation, the color of the coating has not changed, no damage was noticed on the pediment.

Yaroslavl colors

• protection of wood from fungus and mold;
• resistance to sunlight;
• resistance to tree deformation;
• long service life from 6 to 8 years;
• the presence of a variable color scheme that imitates noble wood.

Application impressions: both antiseptics for preparatory work and dyes left pleasant impressions. For 4 years of operation, the coating has not changed its properties.

Flugger (Weather vane)

Weathervane is a manufacturer of expensive dyes from Denmark. The coating not only protects the wood from harmful external factors, mold, insects, fungi, but is also characterized by a dirt and water-repellent effect.

Application impressions: the dye was applied to the facade in one layer 3 years ago. During the service life of the roughness or cracks on the facade was not noticed. The coating shines like new, the cost of the product is fully justified.

Symphony (Symphony)

Symphonia is a reliable manufacturer of antiseptics and dyes for wood protection. During its existence, the company received not only positive reviews, but also the trust of customers due to the durability of colorful products.

Impressions from the application: paint from the manufacturer Symphony was purchased 3 years ago for painting a wooden house. When applied, the coating does not leave streaks, lay down evenly. The dye dried quickly enough, a noble shade imitating natural wood turned out.

Can trees be painted or whitewashed?

When purchasing wood facade paint, buyers often wonder if it is possible to whitewash trees with the same coating. The answer is obvious, the dye can compete with lime, which is traditionally used to protect trees from external factors.

Water-based dyes have the same characteristics as lime - they protect against burns and frost, but do not cope with pests. To protect the trees, it is recommended to use acrylic paints. They effectively protect trees from the harmful effects of insects.

BONUS! Selection of paint for glued laminated timber

Other posts about trees

Question from our subscriber Lilia: I want to plant a tree in front of the windows. I think birch, but have not yet decided. Maybe some kind of fruit?

How far from home can a tree be planted?

On the garden plot, the forest (mixed) behind the outer fence is sooooo high. When the wind, with fear, I watch how they shake. I look over the fence - they are standing 2-2.5 meters from the fence. Can they be cut down? Or book? Do you need some...

"Dry theory, my friend ...". No matter how much you read the instructions, but until you step on your own, practically, and not theoretically, on all the rakes, there will be little sense. We had a tree in our yard. Big, thick and completely dry. It is not known what kind of attack with ...

With the approach of autumn, the question of planting trees becomes acute. Perhaps the story about my garden will help someone with the choice of a tree that will delight you for many, many years and turn into a best friend (confidante / companion / protector - choose ...

We bought a plot, but all the trees are covered with moss. What to do?

See all materials

about trees :

See all

Despite the widest choice of synthetic finishing materials, a huge number of people still prefer wooden facades from clapboard, siding or blockhouse.

Facade paint for wood for outdoor use

Painting wooden walls outside the house

Facade paint for wood for outdoor use

As you know, wooden surfaces suffer from moisture, temperature changes, fungi and insects. In order for the cladding to retain a presentable appearance for a long time, the surface must be treated. A properly selected coating will not only protect the wood from the adverse effects of the environment, but also emphasize the natural beauty and uniqueness of the wood structure.

Why paint wooden surfaces?

The house should be beautiful not only inside but also outside.

For a long time, the only option for covering wooden houses was oil paint based on drying oil. However, now the range has expanded many times over. Acrylic antiseptic primers, various enamels, colorless polyurethane varnishes and much more have appeared.

Oil paints

In order to make the right choice of paintwork, you must consider:

• what type of wood is your facade made of;
• under what weather conditions the work will be carried out, in what climate the house will be operated;
• Is it possible to paint over the facade before assembly - in parts - or is it necessary to work with the finished wall.

When re-processing, you need to know what paint was used for the primary painting. If you don't know, it's easy to determine. Scrape off a piece of the old coating - the oil paint will chip off, and the acrylic will roll up.

Example of a painted wooden house

What paints for wooden facades exist?

The choice of coating for a wooden facade, first of all, is determined by the color scheme, your taste and budget. Before we go to the hardware store, first we will understand the concepts. What is enamel, varnish and paint, how do they differ from each other?

Dye is a suspension of pigments in various substances. It creates a uniform, opaque film.

Enamel- these are pigments in varnish, in the consistency of a suspension. Hard, opaque, textured film.

varnish- substances in organic solvents.

Properly processed facade increases the life of the house several times

Table. Paints that are usually used for facade decoration.

Decorative coating Pinotex Natural

Now about each type of coverage in more detail.

Colorless varnishes and paints

Transparent coatings qualitatively emphasize the natural structure of the tree. The advantages of such a coating, in addition to external beauty, include excellent vapor permeability, due to which such paint dries perfectly on the surface of wood. And thanks to ultraviolet filters, the wood does not fade in the sun.

Environmentally friendly colorless water-based varnish for wood "Aqua" for outdoor and indoor use

On a note! Renewal of such coverage will be required not earlier than in a few years. When repainting, it is not necessary to remove the old layer.

It is transparent varnish that is considered the most popular and widely used option, as it allows you to create any decor under a layer of varnish.

The disadvantage of such coatings is the rather high cost.

Water-dispersion paints and varnishes

This type of coating is one of the most popular in the world. Water-dispersed paints occupy about 80% of the entire world paint market.

Environmentally friendly, odorless, water-based acrylic paint for wood

The advantages of such coatings are color fastness, resistance to moisture and sun. A breathable film is created on the treated surface, thanks to which it is very comfortable to be inside such a room.

The downside of the coating may be unsuitability for work at sub-zero temperatures. Due to the presence of water in the composition, under the influence of frost, such paint exfoliates. In addition, such a coating is less durable, re-treatment may be required after about 4 years. These are mid-range paints.

Textured facade paint

Opaque enamels (traditional oil paints on drying oil and close analogues)

Such enamels based on organic solvents used to be extremely popular. Recently, they have been seriously supplanted by water-dispersion paints.

Opaque enamels

The main reason for the decline in the popularity of traditional paints is increased toxicity. Who among us at least once in his life did not feel bad, inhaling paint? In addition, such paint is more flammable. It is impossible to call opaque enamels durable. When exposed to moisture and temperature changes, the facades quickly lose their presentable appearance, and the coating cracks.

The advantage of traditional paints is low cost. These paints are among the cheapest on the market.

Alkyd wood paint for outdoor use

Alkyd paints are obtained by mixing a binder - alkyd resin, coloring pigment and solvent (kerosene, white spirit and others). Sometimes the mixture includes a desiccant that affects the drying rate, thixotropic (to avoid spreading) and antifungal additives. This coating is water resistant, dries quickly and does not turn yellow, unlike some other coatings.

Video - Dufa. Paint for wooden facades Woodflex

How to paint the wooden facade of the house yourself?

Painting the walls of a wooden house from the outside

We will need:

• work gloves;
• protective mask;
• wide brush;
• small brush;
• rag;
• grinder and sandpaper;
• drill and disc brush for drill;
• spatulas;
• paint stirrer.

Tools and materials for painting

First, let's find out if we are going to repaint the old, peeling wall or process a new, unpainted facade? Those who are painting a new facade can skip the first step in our instructions because we will start by removing the peeling paint.

Step 1: Removing Old Paint

The most important thing when repainting an old wooden facade is the quality removal of peeling paint. If you leave dangling, chipping pieces of old paint on the wall, they will soon fall off, taking some of the new coating with them. And all the work will go down the drain.

Removing old paintwork is not always easy.

There are several ways to remove old paint. You can clean the surface with a scraper or a stiff brush, then rinse with a special solution or water under pressure and dry thoroughly. Or you can warm up the old paint with a building hair dryer and scrape it off with a scraper or spatula. The method you choose depends on your capabilities and the condition of the old coating. The main thing is that as a result of pre-treatment, the surface becomes homogeneous, smooth and dry. No loose paint, protruding lint or smudges.

On a note! For the convenience of further work, it is necessary to remove drainpipes and other elements that protrude and may interfere with work from the facade, and also, if possible, seal the windows with foil.

Exterior decoration of a wooden house with wood oil

Step 2. Sanding and putty

For best results, both old and new wood should be sanded with a sander or drill wheel brush.

Sanding the walls of a wooden log house

wood sanding

If there are gaps and irregularities, they must be repaired with wood putty using a spatula. For wooden facades, oil or adhesive putty is best suited. Due to its composition, it better tolerates moisture and the adverse effects of the environment. Apply a thin layer of putty to damaged areas and dry thoroughly before further processing.

Sealants are intended exclusively for sealing joints and cracks in an already erected building. At the construction stage, the seams between the crowns are sealed with tow

Step 3. Surface treatment with a primer or antiseptic

Any wooden surface - no matter old or new - must be treated with an antiseptic or primer. The main mistake of the majority is precisely that the priming stage is omitted. It is understandable, because often a primer or antiseptic is more expensive than paint. However, it is the priming of the walls that guarantees the perfect result at the end.

Priming and impregnation of the wall of a wooden house with an antiseptic

Modern antiseptic impregnations not only protect wood from corrosion, insects and fungi, but also stop the beginning process of wood decay (which can be very useful in the case of restoration of old walls).

Painting a wooden house outside

New, unpainted wood surfaces also need to be primed. Typically, paint manufacturers produce primers that are ideal for the type of paint you choose. Therefore, the best solution is to purchase a primer from the same manufacturer as the paint you have chosen. For example, if you are painting a wall with Tikkurila Pika-Teho paint, Tikkurila Valtti Pohjuste primer will work.

Tikkurila Pika Teho

Tikkurila Valtti Pohjuste

The primer or antiseptic is applied with a brush in one layer, carefully rubbing the composition into the wood. After coating with a primer and before painting, the wall must be dried. Different types of primers dry for a different amount of time, see the drying information on the package of your product.

Step 4. Coloring

After the surface has been sanded, primed and thoroughly dried, you can start painting.

This is how the house looked like painting house

Important! Pay attention to the weather conditions in which you plan to work. If you are going to process a new facade and it is possible to paint it in parts, it is better to paint indoors. If you need to paint an already finished wall, carefully study the weather requirements on the paint package.

In this example, the facade paint Dulux Domus Aqua is used.

For different types of paints, climatic restrictions may vary. Manufacturers agree on one thing - do not choose wet, rainy weather, scorching sun and heat for painting, or early morning when the facade is not completely dry from dew. A dry, medium-cloudy day is best for such work. Humidity - no more than 50%, air temperature - from +5 to +20 degrees. It is recommended to start work no earlier than 10-11 am.

Before starting work, the paint must be thoroughly mixed with a paint mixer or a stick.

Different paints require different amounts of applications. On average, the paint is applied in 2-3 layers, carefully drying each of them. Sometimes the first layer is diluted with a primer. For exterior painting of the house, a wide, dense brush with fairly stiff bristles is best suited. Apply paint in a thin, even layer, moving along the fibers.

Painting the exterior walls of a wooden house

Painting a wooden house is done in 2-3 layers

Important! The drying time of each coat of paint may vary depending on the type of coating. Different manufacturers paint can dry from 2 to 24 hours.

The house is painted

A well-painted wooden facade is a beautiful appearance of your house for 10 or even 15 years. The main thing in this process is to carefully approach the choice of materials, carefully follow the instructions and take into account climatic conditions.

Video - Painting a wooden facade

The advent of acrylic paints fifty years ago made a mini-revolution in the field of construction and repair work. For such a short period of time, they have won one of the leading positions in the market of paint and varnish products. Nowadays, they are preferred by a large number of consumers. Acrylic paint on wood, due to a significant number of advantages, is widely popular.

The structure of this material is simple. It consists of pigment, water and resin, which is a binding element. Many are interested in the question of whether it is possible to paint a tree with acrylic paint. The answer to it is positive, moreover, this option has a lot of qualities that put it in first place among similar materials.

Technical properties and features of acrylic paints

Acrylic water-based paint for wood is characterized by a wide range of colors - today their number has more than 15 thousand shades. Thanks to such a wide choice, every designer will be able to turn into reality all the most ambitious, explosive ideas and bright projects. The materials from which the paint is made are environmentally friendly, which allows you to work in offices, children's rooms, apartments.

After application, acrylic paint on wood does not emit harmful toxic substances. During the dyeing process, no odor is observed. The increased safety is evidenced by the fact that the material is protected from fire. Therefore, acrylic wood paint can be safely used not only in residential buildings, but also in public places.

Paints of this type dry quickly, which allows the application of additional layers after a few hours. You don’t have to clean the tools for a long time - they are washed with ordinary tap water.

Acrylic paints are characterized by a long service life. It depends on the manufacturer and averages 10-12 years. This material is resistant, which makes it possible to clean the surface with conventional detergents.

Acrylic paint for wood does not change in contact with other external factors - temperature, water, high humidity, direct sunlight. All of these indicators do not violate the integrity of the structure, do not cause damage and cracks.

Distinctive properties of acrylic compositions:

• a synthesis of the virtues of oil and watercolor materials, providing versatility;
• high covering power, saturation of compositions with quick drying;
• the basis of the material is synthetic resins, which creates a double barrier of protection from sunlight;
• resistance to changes in air temperature, changes in humidity, etc.

How to choose quality products?

The process of finishing and processing surfaces made of wood is a whole range of activities. This helps to create warmth and harmony in the house, transforming the atmosphere into a more comfortable one. The purpose of coloring wood is to improve natural performance, protecting it from the damaging effects of natural factors.

When choosing acrylic paints in the building materials market, you should take into account the object or area that you plan to paint. The main criterion is its location, inside or outside the building. There are acrylic paints for wood for interior use that create a smooth finish on various interior items, as well as furniture, floors and any wooden structures. They do not lose their brightness and saturation over a long period of time.

If a person needs to paint objects that are outdoors, it is best to use acrylic paints for wood for outdoor use. They are distinguished by the presence of special components that increase weather resistance and are suitable for facades, windows and doors.

When choosing the color of paints, there should not be any special problems, since a wide range of shades will allow you to choose exactly the one that will harmoniously fit into the overall concept of the interior.

Application technology on wooden surfaces

Acrylic paint is applied in most cases in two layers. Before starting the coating, the condition of the wood should be analyzed and the need for pre-treatment with other substances should be determined. For example, if the surface is highly absorbent, it should be coated with a pigmented primer. The material can be applied without treatment, but in this case, the consumption of paints will increase simultaneously with a decrease in the strength of its adhesion to the base.

If there are cracks and recesses in the wood, they should be filled with a special putty, matched to the future color of the object. The easiest option is a mixture of PVA and small sawdust. After the putty has dried, the entire area should be sanded using sandpaper. The last step before painting is applying primer to the surface.

The first applied coat of paint dries in approximately 4-5 hours. It is best to use brushes with natural bristles or rollers for work. Their forms and parameters are determined by the task at hand. The paint must be thoroughly mixed and, if necessary, diluted.

After checking the smoothness and uniformity of the coating, you can confidently proceed to re-painting, which completes the process. The final drying time of the second layer of paint is longer, up to several days. At the same time, it is important to monitor the drying process so that additional elements do not get into the colored medium. In addition to the fact that acrylic paints create a film, they also act as an excellent antiseptic.

To preserve the materials remaining after staining, clean the neck of the remnants of the emulsion and tightly close the container. If this action is not taken, the paint may dry out or deteriorate. Painting tools must be washed immediately after the process is completed.

Acrylic paints for outdoor use

Acrylic paint for outdoor woodwork is used to form a protective layer and decorative coating on the outside of the building.

Its structure consists of:

• film-forming substance;
• coloring pigment;
• filler;
• auxiliary elements.

Facade paints differ according to the type of dispersion medium in which binders, pigments and fillers are located. As the latter, water, acrylic copolymers or varnishes can be used.

The polymer binder determines the properties and technical characteristics of acrylic paint, which provide:

• durability and reliability of the finished coating;
• vapor permeability;
• protection against moisture and other atmospheric phenomena;
• elasticity;
• efficiency of drying;
• possibility of application on a porous basis.

Exterior paints can be used both as a primary coating, which is applied to a new facade for the first time, and as a secondary coating for the restoration of old wooden structures, giving them durability and elasticity. In addition to wood, paint is applied to almost any external part made of concrete, brick, stone, plaster, etc.

These products should only be applied to a cleaned surface, sanded if necessary to get rid of previous layers. Storage temperature of acrylic paint is from 0 to 30?C. Before starting the process, it should be mixed and diluted. For an ideal suspension, the substance can be filtered using a mesh or gauze.

Acrylic paint on wood for interior repair and decoration work

Nowadays, the number of wooden houses is growing. Accordingly, the rustic-style interior is also at the peak of popularity. Thus, the details and elements of wood are present in almost every home.

Acrylic paint for interior woodwork is absolutely harmless.

The considered material has the best qualities:

• fast drying after staining;
• the absence of an unpleasant odor;
• ease of application to the floor, ceiling and walls;
• no requirement for special equipment and skills.

At the same time, the only drawback of the composition is the need to immediately purchase the entire required amount of paint for the room, since the purchased materials may not match in shades.

The main difference between acrylic emulsions for interior work is the final appearance of the surface. It can be glossy or matte. Acrylic paint for wood floors in most cases is chosen glossy, just like for walls. Ceilings are decorated in a matte style, since when using this type of emulsion, a velvety plane is formed. It contributes to excellent masking of small defects. Glossy type, on the contrary, makes them noticeable.

Of course, great importance should be given to the choice of paint manufacturer. When applying acrylic coating, you need to be especially careful in the bathroom and in the kitchen, since these areas require more thorough processing. Such paints can be used to cover furniture, doors and other wooden objects in the house. There is the right type, color and consistency for everyone, and the appearance will be brilliant for a long time.

Advantages of acrylic emulsions

The popularity of these paints is ensured by:

• environmental friendliness (in the manufacture of products, substances harmful to humans are not used);
• convenience and ease of application (paints do not emit odor, which makes it easier to work with them);
• fire safety (especially relevant, since they are applied to a wooden base, protecting it from ignition);
• unlimited color palette (a wide range of shades of acrylic paints provides for the possibility of using it not only for painting wooden structures, but also for artistic creativity);
• drying speed (2-4 hours, due to the thickness of the layer applied to the object);
• indicators of elasticity, strength and reliability, ease of maintenance, resistance to rubbing;
• repulsion of dirt by the surface on which the acrylic emulsion is applied, and the transmission of air by the film;
• moisture resistance;
• duration of operation of painted objects (serve for more than 10 years, without loss of aesthetic appearance);
• a wide range of use (due primarily to the resistance of materials to ultraviolet radiation, moisture and mechanical damage, the possibility of use inside and outside the premises);
• versatility and versatility (the ability to combine acrylic emulsions and other building materials and apply them to any type of surface).

Saving time and money

Acrylic paints are produced using the latest innovative technologies. Choosing this material for wood coating, the consumer will not make a mistake, because he will save not only time due to the highest drying speed, but also material resources due to the elasticity of the emulsion.

With it, it is possible to embody any ideas, no matter how colorful and diverse they may be - a large color palette will make any room or facade bright and saturated. And such a riot of colors will last for decades. The coating is easy to clean and wash, it partially repels dirt and dust.

Deciding to paint any surface with acrylic paint, you do not need the help of specialists and the use of professional equipment. The simple use of a brush or roller is available to everyone. In addition, this material does not affect the state of health and is completely safe for internal use.

The popularity of acrylic paints is not artificial or invented information, as the facts speak for themselves - about 80% of European houses are painted with this type of emulsion, the relevance of which is increasing daily, along with the improvement of production and structure.

Useful video about mistakes when painting wood

• Categorized in
• Tagged with

Acrylic paints were introduced to the market half a century ago. It is safe to say that this is a real breakthrough in the construction and repair industry. Today, this type of coating is preferred by most consumers.

The composition of this material is simple. It consists of three elements: resin (binder), water and coloring pigments. Those who are not yet familiar with this coating are interested in whether it is possible to paint wood with it? The answer is undoubtedly positive. Moreover, this option has a lot of advantages among similar compositions. How to paint a tree with acrylic paint and how to choose the right product?

Features of acrylic paints

It is ideal for painting wooden surfaces. Thanks to a huge selection of color palettes, everyone will be able to bring their design ideas to life. The material is environmentally friendly, so it can be applied to furniture, doors and windows, even in children's rooms.

After application, the coating does not emit toxic elements. In addition, the paint does not have a strong odor. Therefore, it can be used in public places.

Another advantage of this material is fast drying (1-2 hours). This is an absolute plus for those who want to do the job quickly and at the same time with high quality.

In addition, it is not necessary to clean the tools used in the staining process with solvents and other odorous compounds. It is enough to rinse them under running water.

Another important feature of acrylic is its long service life, which varies between 10-12 years (depending on the manufacturer). The coating is sufficiently stable, which makes it possible to use cleaning products on the painted surface.

Acrylic paint protects a wooden product from ultraviolet rays (due to the resins contained in the composition), mechanical damage. It is water-repellent, breathable, resistant to temperature, high and low humidity.

Acrylic coatings resist the formation of cracks and bubbles on the surface, have a high degree of hiding power, which allows you to apply a minimum of layers.

Another distinctive feature is the ability to remove paint before it sets on a wooden surface. After drying, a protective film is formed on the painted products, which can only be removed by using special solvents.

Important: After processing products with acrylic paint, it literally breathes. At the same time, protection of wooden products from pests is ensured.

Are there any disadvantages?

Despite the many advantages, acrylic also has disadvantages:

1. The price for a quality product is very high.
2. If you store the paint for a long time, then it can exfoliate.
3. Too cheap acrylic paints can lose their color, especially under the influence of ultraviolet light.

As you can see, the number of minuses is very small and they relate mainly to product quality. However, the existing disadvantages should still be taken into account if you want to paint wood with acrylic paint.

Selection rules

The choice of quality composition depends on what product is planned to be painted. If its location is indoors, then it is recommended to select a coating intended for indoor use. Such compositions create a smooth coating on furniture, interior doors and other decorative elements.

They do not lose color for a long time and are considered absolutely harmless. In addition, acrylic indoor coating dries quickly, is easy to apply, and does not have a strong odor.

Another thing is if it is necessary to paint outdoor objects - external doors, windows, facades, etc. For this, it is recommended to choose a special coating made for external work. Both options differ in composition. The latter includes special elements that resist atmospheric changes (consists of coloring pigments, fillers, fixers).

This composition provides reliability and durability of the coating, elasticity, protection from moisture and the sun, quick drying and a high degree of vapor permeability.

This composition can be applied both to a new product and to old structures made of wood (only before this, the surface must be carefully sanded).

Store acrylic paint preferably at a temperature not lower than 0 ͦ and not higher than 30 ͦ C.

Important! Before use, it should be mixed and diluted.

How to apply acrylic on a wooden surface?

Before using this material, wooden products should be prepared for the process. Especially when it comes to old surfaces. If the facade, window, door, furniture are new, then there is no need for pre-treatment. Acrylic can be applied immediately.

So, if the product has cracks, indentations, irregularities, then they should be repaired with a putty designed for wood. If you plan to use a light-colored coating, then it is preferable to select the appropriate shade of putty, otherwise you will have to apply several layers of paint to mask the contrast.

After it dries, carefully sand the surface with a grinder or sandpaper. It is worth noting that in this case, you should be careful not to disturb the position of the fibers. Therefore, it is recommended to grind along their direction.

Next, the product should be cleaned of dust. To do this, you can use a vacuum cleaner or a damp sponge. Then you need to apply the soil. This will ensure low paint consumption and good adhesion of the surface and the base layer.

Important: Do not use a water-based primer on outdoor products. It is better to purchase an oil-based material for these purposes.

After the primer dries, a decorative layer of acrylic paint is applied. If you plan to paint a door, furniture or window, it is better to use a natural-based brush. For bulk work, it is recommended to purchase a roller.

It is important that outdoor structures be painted quickly after applying the primer. This is due to the fact that some types of soil are not susceptible to ultraviolet radiation and high temperatures (you can read about this in the instructions for using the primer).

Painting wooden products with acrylic paint is the best option. And this applies not only to those that are indoors, but also located on the street. The main thing here is to choose the appropriate and high-quality material.

Acrylic paint is the most popular among facade paints. And this is not surprising: it fits perfectly on any surface: concrete, wood, plaster, fiber cement. It can be used to paint previously painted walls without removing the old, but still firmly adhering, finish coat.

Acrylic-based coloring compositions are water-soluble. This is their undoubted advantage, since working with such paints is not only easy, but also safe. In their composition there is not a single substance that can harm the respiratory system or the skin.

When properly applied, these paints do not form smudges and sagging. The painted surface is smooth and uniform. One of the best properties of acrylic paints is their excellent covering power. However, when working with complex surfaces, it is recommended to apply two coats. This will provide greater color saturation and durability of the coating. All manufacturers of acrylic paints guarantee that with proper preparation and painting of surfaces, their products will last at least 10-15 years.

When choosing a paint color, keep in mind that lighter tones can reflect heat and ultraviolet light. Therefore, such compositions are optimal for houses in regions with a warm climate. Light walls will suffer less from overheating, and the finishing layer on them will last longer. The situation is reversed with recommendations for the northern regions. Here it is better to choose colors of saturated and brighter tones.

The composition of acrylic paints is very simple. It includes:

• water;
• acrylic emulsion based on polyacrylates and copolymers;
• pigment (gives the emulsion a certain color).

Characteristics of paints based on acrylic

Prices for different types of building paints

Construction paint

Preparing the facade for painting

Preparing the walls for paint application is an extremely important step that should not be ignored. First of all, carefully examine the surface of the facade. If the house has been previously painted, take a spatula with a metal blade and check how firmly the old finishing layer holds.

If the paint comes off easily, remove it. Depending on the thickness of the coating, choose a tool for work. If the layer is thin and easily detached from the walls, a spatula and a metal-bristled brush will suffice.

A thick layer, which in some places is firmly attached to the walls, will require the use of an angle grinder (grinder) with a special nozzle: a cord brush for rough wood processing. She (brush) is able to remove not only the old finishing layer, but also level the wooden surface. Sandpaper discs will not help in this work.

If the old paint is easy to remove, you can use sanding discs grit 80-120 GRIT. It is recommended to take into account that when removing the finishing layer, a significant amount of dust will form, containing small fragments of the old coating. Therefore, it is necessary to protect the respiratory organs with a respirator or a cloth bandage.

Sanding is a very hard and unpleasant job, as the sandpaper is constantly clogged with paint.

Before proceeding with the cleaning of the facade mechanically, it is necessary to remove all the nails, if any. If it is not possible to remove them, hammer them with a hammer. If the nail heads are rusty, unsightly stains will appear on the new finishing layer over time. Therefore, the metal is treated with red mercury or special anti-corrosion washes. The latter are preferable, since they, unlike mercury, are not poisonous.

If the walls are built from logs, machining is excluded. In this case, other methods are used to prepare the facade for painting. First of all, you need to check the tightness of the space between the logs. It is usually filled with tow, moss or hemp. These materials must be compacted where required. After that, dirt and dust are removed from the surface of the logs with a rag or broom.

Prices for different types of paint removers

Paint remover

Priming wooden walls

The process of preparing the facade for painting includes the stage of priming. In order not to make mistakes in this matter, you need to remember one rule: external wooden walls cannot be coated with a water-based primer. Only on oil.

As a rule, all high-quality primers are also antiseptics. Before starting work, you need to carefully read the instructions on the package. The conditions under which priming with this agent can be performed, and the manufacturer's recommendations for application, will become known.

Valtti Akvabase (Valtti Aquabase) and BIOFA are considered to be the best primers for wood. These oil-based compounds can be used on any wood: fresh planed, pressure impregnated, heat treated, old. When working with Valtti Akvabase, personal protective equipment must be used.

How to apply primer to wood

With a small amount of work, a paint brush with natural or artificial bristles can be used to apply the primer. This tool is especially handy when processing log facades. If the walls are even (plank or timber), you can apply the primer with a roller. It's easy to do.

Step 1. Pour enough primer into a paint tray or any other suitable container so that 1/3 of the volume of the roller roller can be immersed in it.

Step 2 The roller is lowered into the solution and rolled 2-3 times along the relief horizontal part of the paint bath. This removes excess primer, and when applied, it will not drain from the wall.

A foam roller is a great tool for applying primer.

Step 3 Moisten a section of the wall by rolling a roller over it. Each next strip should overlap the previous one by 5-7 cm.

Step 4 The roller is again immersed in the primer and squeezed out. Further, work is continued according to a given algorithm until the entire area of ​​​​the facade is processed.

It should be remembered that as little time as possible should elapse between the processes of priming and painting. Not all primers are resistant to light and UV. Therefore, they need to be covered with a layer of paint in a timely manner.

Prices for wood preservatives

Impregnation for wood

Mechanical painting of wooden walls

The mechanical method of painting wooden facades involves the use of special tools. But regardless of the chosen method of finishing work, several rules must be observed during their implementation.

1. The paint is applied at a positive temperature: from +5 to +30°C.
2. Relative humidity should not exceed 80%.
3. Do not paint parts of the facade exposed to direct sunlight.
4. Do not apply paint on wet surfaces.
5. For tinting acrylic paints, it is necessary to use water-soluble dyes with good light fastness. For example, Ceresit tinting pastes are an excellent choice.

Painting the facade mechanically is convenient in every respect. Spraying paint allows it to penetrate into the smallest cracks and pores of the tree. This method is the most beneficial when painting log walls. With the help of an airbrush, all places that are hard to reach even for brushes will be covered with a finishing layer.

Tool selection

For applying paint, two types of tools are used: air and soulless spray guns. Otherwise they are called "sprayers".

Prices for pneumatic airbrushes, spray guns, texture guns

Pneumatic airbrushes, spray guns, texture guns

How paint spray tools work

Tool	Tool types	Principle of operation
	Pneumatic and electric. The latter are of three types: with a lower and upper tank, with a pump for supplying paint.	Spraying paint is carried out under the influence of air flow, which is supplied by a pump or pressure (up to 8 atm) created in the tank.
	Membrane, piston, hydropiston.	The supply of paint is carried out by compressing it without the use of air supply. The spray gun is equipped with an elliptical nozzle with a small cross section. Due to the difference between the pressure inside and outside the machine, there is an effect of spraying paint at the moment it exits the nozzle.

Airless spray method is the most economical. But devices of this type are more expensive, therefore they are mainly used for painting large areas. However, this method also has its drawbacks. One of them is that a significant part of the small droplets hangs in the air surrounding the workplace, and gradually settles. Therefore, it is necessary to use personal protective equipment. Another drawback of the airless method is that it requires the highest quality protection of all nearby objects and elements of the facade: windows, doors, trim, etc.

For painting the facade of a private house, air-type electric spray guns are most convenient. These tools have their own advantages and disadvantages. Among the minuses is the formation of rather large drops that fall to the ground without reaching the wall. The advantage is that this method of application does not form a dust cloud with fine paint particles.

Manual electric air type spray guns are the easiest to use. They are a pistol-type handle, at one end of which a hollow rod with a nozzle is fixed, at the other - a reservoir for paint. A hose from a pump equipped with a control unit and an electric motor is connected to this container.

These tools are inexpensive and easy to use. During operation, they do not make sounds characteristic of large machines and do not vibrate much. Using such a spray gun, you can paint the facade at least twice as fast as with a roller or brush.

The tank capacity of such tools does not exceed 1.5 liters. Household models apply paint at a speed of 0.5-0.7 l / min. Airless-type household spray guns work a little faster: up to 1 l / min. The most popular brands: Wagner, Bosch, BORT, STURM, Spets.

• 0.5-1.3 mm for acrylic paints;
• 2.5-2.8 for primers.

More powerful tools are painting stations. They are significantly more productive than their manual counterparts. The stations are equipped with powerful electric motors and have a wider range of adjustments.

The technique of applying acrylic paint with a spray gun

Step 1. At this stage of work, all elements of the facade that are not intended for painting are protected. They are covered with plastic wrap, which is fixed with staples and a construction stapler.

Step 2 Dilute acrylic paint with water. Each household spray gun is equipped with a special device (watering can) for determining the viscosity of the composition. How to define it?

1. Diluted paint is poured into a watering can, the outlet of which is previously closed.
2. Mix the paint.
3. After that, they arm themselves with a stopwatch (or use the appropriate gadget on a mobile phone), open the outlet of the watering can and count the number of seconds from the beginning to the complete outflow of paint.

For acrylic paints, the average flow time should be 26-28 seconds. For primers - 24-25 sec. In order to achieve this indicator, they begin to dilute the composition with water in a ratio of 1:10 (1 part of water and 10 parts of paint). Check the viscosity. If not diluted enough, add another 10% water. Thus, they find the optimal proportions and achieve the desired density of the composition.

Step 3 Pour the diluted paint into the container of the spray gun.

Step 4 The paint supply is adjusted using a special regulator, which is equipped with any apparatus of this type. On the body of the spray gun or on the regulator, gradations should be applied: maximum, medium, minimum. If you plan to paint a large area in one go, set the maximum paint supply speed. If you want to paint a small section of the facade, set the minimum or medium.

Step 5 Connect the cord of the device to the mains.

Step 6 Bring the spray gun to the facade at a distance of 40-50 cm and press the power button of the tool (located on the handle).

Step 7 Do a trial staining and observe if there are any strong smudges of paint. If they are, reduce the amount of feed using the regulator.

Step 8 Apply paint to the facade so that the surface is evenly painted.

Step 9 When the paint in the tank runs out, refill it and continue working.

When painting log walls, special attention is paid to the places of recesses. It is not recommended to fill the spray gun container more than 800 ml. Otherwise, the device will be difficult to hold on weight. It should also be taken into account that any electric spray gun vibrates. Therefore, in the work you need to take breaks in order to give your hands a chance to rest. But in any case, with the help of a well-tuned sprayer, you can paint the facade with acrylic paint as quickly as possible.

Video - Electric spray gun. How to paint!