Work on the land, whether loosening, digging or hilling, takes a lot of time and effort. Therefore, many gardeners, in order to facilitate the work of cultivating the land, acquire auxiliary special equipment - walk-behind tractors. Using this versatile unit, you can perform a number of diverse works, starting with cleaning the site and cultivating the land, and ending with the transportation harvested crop and any cargo. But to weed, spud or just remove the snow, as well as construction garbage impossible without attachments - an adapter. A specially equipped trolley with a seat that turns a walk-behind tractor into a mini-tractor is quite expensive in stores. Making an adapter for a walk-behind tractor with your own hands is a completely feasible task that an owner with a technical creative streak can complete.
With this attachment, you can greatly simplify the application. After all, it acts as a transitional link that connects the unit itself with other functional elements: nozzles for planting and hilling potatoes, flat cutters, a plow ... By installing equipment, gardening and gardening work can be automated as much as possible. For example, when using special equipment with attachments, you can increase the working speed from 5 to 10 km/h.
There are several types of adapters. In general, the design is a trolley attached to the rear of the walk-behind tractor, equipped with a comfortable seat.
Some models are equipped with a lifting lever, which greatly simplifies the control of the mechanism and the movement of the unit itself around the site. Other adapters, in addition to agricultural work, can also be used for the transport of goods. They are equipped with a special body. Adapters can have short or long drawbars depending on the functional value. Models with short drawbars are designed to work with light walk-behind tractors, and with long ones - with heavier units.
There are also models with a telescopic drawbar, as well as those in which the track width can be adjusted.
Adapters are fixed to the walk-behind tractor using a single enlarged hitch, which consists of two parts: the first part is necessary to connect the equipment to the unit. And the second one acts as an adjustable adapter between the equipment itself and its lifting mechanism. To increase the number of implements used simultaneously, the adapters are equipped with a double universal hitch.
Assembly of a simple structure
A simple adapter model is a metal frame. It is made from a pipe rectangular section 1.7 meters long. At one end of the pipe, a pipe 0.5 meters long is welded perpendicularly, which will serve as the basis for attaching racks for adapter wheels. The height of the racks themselves from the wheel axle to top point- 0.3 meters.
For the manufacture of the structure, you can use the wheels removed from garden cart. You can install them on bushings, which are quite simple to perform on a regular lathe. Bearings of the appropriate size are put on the finished bushings.
After that, braces must be attached to the central tube and adapter wheel bushings by welding. The length of the products depends on the angle of their inclination relative to the structure. The square adapter frame can also be made in any size. In our case, this is a frame of 0.4x0.4 meters. To equip attachments, a channel No. 10 0.4 meters long is welded to the rear end of the frame. The assembly and connection of the side pipes of the structure is carried out using bolts.
A lever for adjustment is also welded to the frame. It has three “knees” 20, 30 and 50 cm long. To increase the applied force, the adjusting lever is equipped with an additional lever 75 cm long. The coupling assembly can be purchased at the store or made independently. Regardless of whether it is a production sample hitch or a self-made one, Special attention should be given to its reliability. The duration of operation of attachments depends on its quality.
The seat is placed on a metal support, which is welded to the central pipe. The adapter is ready for use.
Arrangement of a multifunctional model
For the manufacture of a multifunctional device, it is necessary to prepare:
- Steel pipes and corners;
- Sheet steel;
- Two wheels;
- Comfortable seat;
- Welding machine and tool kit.
This adapter is multifunctional model. It can be used for basic agricultural work and transportation of goods over uneven terrain over short distances. You can equip the structure with such agricultural implements as a plow, harrow, hiller, potato digger. AT winter months a snow scraper can be attached to the adapter.
The main elements of the equipment are: the frame and coupling devices, as well as the wheelset and seats
The process of manufacturing an adapter at home takes place in several stages.
And this is an idea! How to upgrade a walk-behind tractor into a snow blower:
Stage # 1 - drawing up a kinematic diagram
To ensure the balance of the structure and prevent additional overloads at the design stage, it is necessary to draw up kinematic diagram. You can make it yourself or use a ready-made version.
This scheme was developed for the manufacture of an adapter designed to work on the Neva walk-behind tractor
Stage # 2 - making the main parts
When manufacturing and assembling a frame, it is important to provide for the arrangement of a fork with a sleeve. It is necessary to ensure the free rotation of the trailer.
The frame of the structure is made of metal pipes and corners
The body of the structure is made of steel sheet. The height of its sides is made no less than 30 cm.
In the manufacture of racks for adapter wheels, you can use the following diagram
The simplest option for manufacturing a coupling assembly of the structure is a pin 15 cm long, which is stuck into the hole in the drawbar of a U-shaped walk-behind "hook". The disadvantage of this option is rapid wear: under the action of a freely rotating trailer, the holes for the hitch are quickly broken. To reduce wear, it is desirable to lengthen the U-shaped chain.
Stage # 3 - seat installation
On the spinal frame of the adapter beam, stepping back 80 cm from the front edge, the seat is fixed. It is fixed with screws. The adapter is ready. It remains only to check the performance of the multifunctional device.
4 options for making a trailer for a walk-behind tractor with your own hands:
MTZ motoblocks are agricultural machinery manufactured by the Minsk Tractor Plant. A large number of models are used in various areas buyer activities.
Attachments for walk-behind tractors: what is it and where can I buy it?
A person who purchases a walk-behind tractor for their own purposes is probably familiar with the concept of attachments and the concept of its use.
Attachment for motoblocks MTZ(and products not only of this tractor plant) includes:
- mowers, grinders, flat cutters;
- potato planters, potato diggers, hillers;
- plows, tillers;
- trailers, seeders, hubs.
Of course it's not full list of what we can mention when talking about attachments, but this list gives at least a small idea of \u200b\u200bthese devices.
The adapter is a seat connected to one, two or more wheels. One of the most simple ways- go and buy a ready-made adapter and successfully use it. But! For those who want to try themselves as a design engineer and test their capabilities, there is a way to make an adapter to the MTZ block with your own hands. In fact, this is not as scary as it might seem at first glance. 
There are many websites that provide detailed information about how to design an adapter. In addition, a device made by oneself is guaranteed to last the same period of time as purchased in a store. You just need to carefully read the instructions, follow it and confidently get to work. The main thing is that it is quite possible to make such an adapter with your own hands.
Attachments to the MTZ walk-behind tractor: hitch, mower, digger
Some attachments for the MTZ walk-behind tractor can be made by hand. And you should not be limited to one adapter. There are many ways to make other devices with your own hands, for example, a hitch, a mower or a digger. First you need to understand what each of these parts is.
Where to use the mower and digger?
The mower is used for mowing grass different heights. This is also one of the types of attachments for walk-behind tractors.
A digger (potato digger) is used to dig out something. The choice of this equipment depends on general characteristics motoblock.
What is a hitch?
The hitch is a coupling unit that connects the walk-behind tractor with various equipment (potato planter, etc.). Motoblock hitches allow you to control the angle of inclination when performing certain work.
We harrow the earth
In order to sow, the soil is always plowed (harrowed). Therefore, for a modern farmer, a harrow is one of the most important equipment.
Finding a drawing of a harrow is not difficult - many of them are presented on various sites.
Do it yourself
All these devices can be made by hand. Numerous Internet resources contain carefully thought-out drawings that allow you to design such equipment at home. There are especially many drawings for couplings, you can choose exactly the one that suits you and get down to business.
In addition, if you want to make attachments yourself and be sure that they will last for a long time, it should be noted that it is possible to design a harrow for a walk-behind tractor.
What is the importance of a walk-behind tractor and attachments?
The walk-behind tractor is a universal device - a kind of small-sized tractor. For an ordinary summer resident walk-behind tractor - perfect solution. The operator who controls the walk-behind tractor follows the machine, thereby cultivating the soil in a certain way. Motoblocks are used for plowing, hilling, etc. soil.
In addition, a cultivator can be used. As a rule, this device is used for loosening, weed control, moisture conservation, hilling, etc. When choosing attachments, all criteria and requirements should be taken into account. If you decide to design such equipment with your own hands, then carefully read the instructions and drawings, select what is right for you.
Working with a walk-behind tractor over large areas is very difficult due to the fact that you have to constantly walk behind it. It's physically exhausting, plus you need to guide him to the right direction. With a structure weight of about 150 kg, it is heavy.
The adapter will help to facilitate the process - a design that is connected to the walk-behind tractor and allows you to control the walk-behind tractor while sitting. And all attachments are already further attached to it. That is, you, in fact, get a "mini-tractor" with somewhat fewer capabilities.
From the manufacturer
Such machines are not presented from the official Smorgon plant, but other manufacturers offer you their adapters.
Analogues
There are several options for analogs of adapters for the MTZ walk-behind tractor from other manufacturers.
Arable module Tselina
The most voluminous and frequent work in Belarus are associated with the cultivation of the land and its hilling. The arable adapter is installed on the MTZ-09N motoblock, and allows you to connect a cutter, harrow, hiller and plow to it. This will greatly facilitate all work processes and plus you will manage it while sitting.
Adapter Celina PM-05
Feature of adapter Celina PM-05:
- This adapter is equipped with 4×10 pneumatic wheels. There is a band brake on the rear wheels, which helps to make the control more versatile.
- The track size is 62 cm.
- The maximum working speed is 10 km/h. Most attachments operate at a slower speed so this speed is sufficient.
- The arable adapter weighs 50 kg.
Horsesam IS-2
This adapter is manufactured by JSC GMZ and is a mini trailer with seat and steering wheel. It is designed to work on garden, garden and household plots in any climate zone.
With the help of this adapter, the MTZ walk-behind tractor turns into a full-fledged "mini tractor". Workplace the operator is made with maximum comfort and versatility, the handlebar is made in the style of motorcycles.
Important! It should be understood that this is not a car, and you can not use it on public roads
At the same time, all the main control levers of Belarus are placed on it: gas, brake, clutch, gear shifting (including reverse), turning the engine on and off. And all this is located correctly and there are no problems in managing the horse.
In addition to the arable model, it is compatible with large quantity workable attachments, such as:
- Plow, cultivator, hiller, harrow;
- Potato planter / digger;
- Bucket, blade, snow removal equipment
- Various mowers, etc.
Potato planter KS-1 Potato digger KM-1 Okuchnik OK-2 
Plow PU-00.000-01
Cultivator-harrow KB-00.000 
Dump Snow blower CM-0.6 Rotary mower KRM-1
Horse's benefits include:
- Compact dimensions;
- Comfortable steering;
- Small weight (only 70 kg);
- The same track size of the rear and front wheels (70 cm).
Homemade option
The adapter is not complex design, and if desired, you can even make homemade version horse type. But still, ordinary adapters are more common, in the form of a seat, for connecting to a walk-behind tractor from the back.
Homemade adapter device
- Homemade adapter for Belarus it is made using a steel profile, about 170-190 cm long.
- Another similar profile 50-60 cm long is welded perpendicular to it. This profile will be responsible for the track size. If you need a narrower furrow, reduce it, if large, then increase it on the contrary.
- At the ends of the perpendicular base, attach the wheel stands. Their height usually ranges from 25 to 40 cm.
- After that, additional stiffeners - braces - are welded to the bushings. Their dimensions should be chosen based on the angle of inclination of the structure.
- The next step is the manufacture of a frame for connection with attachments. Its side guides are bolted to the wheel struts.
- To the middle of the wheel frame, where the two profiles were connected, a seat is installed. It must be placed just above the frame so that you can comfortably position your legs while the homemade adapter with the MTZ walk-behind tractor is moving. Any that is at hand will do, the main thing is to be comfortable.
- The installation range of the seat must be selected based on where the steering wheel will be located.
Video reviews
Overview of the Horsam IS-2 adapter
Overview of the manufacture of a home-made adapter for the MTZ walk-behind tractor
Reviews
Here are some reviews shared on the forums by experienced adapter owners:
MartinM:
“On a flat area, when driving with an adapter, there are no problems at all, just like when cultivating the soil with a plow or milling cutters. The only nuance was the movement of Belarus with an adapter and a trailer. At big weight cargo in the trailer, and hitting a bump, the walk-behind tractor rears up. If you increase the speed of such a problem is not observed.
Andrey-67:
“If you ask which adapter is better, purchased or ready-made, then there is no unequivocal option. On the one hand, Horse is good because everything is almost ready. But on the other hand, it's all ready to be customized to fit your MTZ and your needs. Yes, and the price is not small. Better to make your own. Yes, it’s longer, but it will be oriented to you and you can always correct its work”
trailers
Trailers are an integral part of any Belarus and allow you to transport goods over distances.
From the manufacturer
Smorgon plant offers to buy such vehicle they have.
Trailer PM-00.000 is standard view trailer, which is attached to the walk-behind tractor with a hitch. On the front side there is a seat for comfortable movement with cargo and steering of Belarus.
Feature trailer PM-00.000
- Its maximum load capacity is 300 kg. And the mass of the trailer itself is 200 kg.
- The trailer is equipped with pneumatic wheels. Ground clearance is 27 cm. And the gauge is 120 cm.
- The body is made of high quality steel. Its total area is 2.36 m 2 or 0.705 m 3 in volume.
- Trailer dimensions: 308 cm long, 151 cm wide and 92 cm high.
This cart has a small flaw. Its platform is welded to the frame. And you have to unload the cargo yourself.
If you transport bulk materials (for example, crops), dump trucks are much more convenient.
Analogues
Other manufacturers have a more advanced model - the MP-480 trailer.
Its load capacity is 500 kg. The frame is additionally reinforced to give the trailer more stable operational properties and prevent tipping during operation.
Feature trailer MP-480
- It has a folding side, thanks to which you can easily pour out the cargo from the trailer.
- If the height of the body is not enough, then you can further increase it with the help of special shields that come with the cart.
- There is a convenient storage box under the seat various tools, which allows you to always keep them at hand and, if necessary, carry out repair work with a cart.
There is a large number of trailers for different tastes and colors, for example: TM-360 and 350 manufactured by Belarusmash, TM 500-700 of the Akimov metallurgical plant, etc. But their designs are similar.
Trailer TM-500 
Trailer TM-350 
Trailer TM-360
The only difference is whether it is tipper or not. When choosing a trailer, be sure to consider this point.
Homemade option
In fact, there is nothing better than what is made by hand. And with a trailer, there are no problems. And you don't need any special skills. If you have a chassis, metal, a grinder and a welding machine at hand, you can make a trailer yourself.
trailer device
- First you need to make a frame. For the frame, it is best to use a square tube.
- Then we move on to the body. During the assembly of the body, it is necessary to provide for the possibility of tilting the sides, this greatly facilitates loading and unloading. And if you wish, you can even make a dumping version so that you do not need to unload it.
- Then just put it all together and install a comfortable seat in front, because without it, riding an MTZ walk-behind tractor with a trailer will be impossible. The seat distance must be calculated depending on the position of the steering wheel so that the control is comfortable.
If you are interested in the issue of making a home-made cart for Belarus, then you can look at the forums, there is a lot of information there that relates to drawings, diagrams, trailer sizes, the nuances of assembling dump and conventional carts, and much more.
Video review
Overview of the dump trailer on the MTZ-08MT
The production enterprise Minsk Tractor Plant was founded in 1946. Throughout its history, the company has become one of the most major manufacturers agricultural machinery around the world. To date, MTZ has produced about 3 million tractors, of which more than 400 thousand have been sold to 100 countries of the world.
1 Attachments for MTZ motoblocks
Attachments for MTZ walk-behind tractors are designed to expand the capabilities of walk-behind tractors. To date, there are a considerable number of models that allow you to harvest hay, mow lawns, plant and harvest potatoes, chop wood, transport goods, etc.
Before purchasing such equipment, you should determine the range and scope of work, the purpose of the selected model. Very popular among the people following devices: mowers, hillers, cultivators and trailers.
Potato diggers help to dig potatoes out of the ground, throwing them to the surface. Mowers are used for mowing grass on lawns, gardens, parks. Hillers are used for weeding and hilling the earth. Cultivators loosen the surface, level the soil after processing. It can also be used to fertilize the soil. The trailer transports a variety of goods in farms and municipal services.
Plow for motoblock MTZ - mechanical means for tillage, which is intended for plowing the land. Plowing is the main one, which crushes the soil and lays it upper layer into the furrow The design of the plow consists of working bodies, which are mounted on a metal frame, and auxiliary parts.
1.1 Adapter for MTZ walk-behind tractor
The adapter for the MTZ walk-behind tractor is a device that is equipped with mechanisms for installing and securing a variety of attachments. Externally, the device resembles a single-axle trailer. With the help of an adapter, the productivity of the unit is increased, and the possibilities for performing work are expanded. The adapter turns the walk-behind tractor into a mini-tractor, which makes it possible to cultivate the soil, hilling and cultivating crops.
1.2 Design and types
By functionality, adapters are divided into body mechanisms used for the transportation of goods and used only for cultivating the land, not equipped with a body mechanisms. Among all models of such mechanisms, there are devices that are equipped with telescopic drawbars and have the ability to change the wheel track width.
Adapters are divided according to the power of the walk-behind tractor, on which they are installed:
- heavy, which are equipped with a long drawbar and are used to work with powerful single-axle tractor devices with power plants that work with a water cooling system;
- light, which work with low-power equipment with air cooling and a short drawbar.
1.3 DIY adapter
A trailer of a simple design can be assembled by hand. As user experience shows, do-it-yourself adapters are not much inferior in quality to factory-made models. Price homemade trailer much lower than factory. In addition, do-it-yourself devices meet specific requirements (working conditions) more than store-bought ones, which often have to be finalized.
In order to make an adapter yourself, you must follow these steps:
- It is worth preparing a drawing for the future trailer. If there is no practice in this area, you can use ready-made schemes.
- Acquire the necessary materials for work and select the right equipment: steel sheet, welding technique, profile, etc.
- Make parts, after which you can do the installation of the device.
- Equip your adapter necessary equipment and check the work in practice.
2 Description of models
AT the lineup MTZ walk-behind tractors include devices with different capacities: 05, 06, 07, 08, 09, 10 and 12. Among these models, units with indices 05, 06, 08, 09 and 12 are popular. are devices 09 and 06.
2.1
The unit was produced from 1978 to 1992 and was intended for preparing light soil for sowing, cultivating and inter-row processing of beets and potatoes. small area. The device is also used for harvesting hay and transporting goods.
The design of the equipment is built on a single-axle chassis. The device is designed like a mini-tractor and can carry a trailer with a load of up to 500 kg. MTZ 05 walk-behind tractors are equipped with a power take-off at a rotation speed of 1000 rpm, which allows the device to be used as a drive for stationary devices: animal feed grinders, woodworking machines and pumps.
MTZ 05 works with different types attachments:
- cultivator KR 70;
- plow PL 1;
- trailer PX 0.5;
- mower KH 1;
- BN 50;
- hiller KO 2.
Specifications:
- engine resource - 3000 h;
- fuel consumption - 340 g/kWh;
- fuel tank capacity - 5 l;
- dimensions - 1800 * 850 * 1070 mm.
2.2 Motoblock MTZ 06 medium heavy
MTZ 06 is a representative of single-axis devices, which is used for agricultural and farm work on small land plots. The latest model of the MTZ 06 MKR unit is equipped with a 177F engine and is very popular in the markets of post-Soviet countries. The device cultivates the earth to a depth of 0.3 m with a surface coverage of 1.1 m.
The possibility of installing wheels for the MTZ walk-behind tractor allows you to use the device for cultivation, soil preparation and cultivation of agricultural plants. The design of the mechanism allows the installation of ballast weights, and change the width of the wheel track. For greater operator comfort, the cultivator is equipped with a support that reduces vibration during operation, as well as vibration-isolated handles.
Specifications:
- fuel consumption - 1.8-2 l / h;
- fuel tank capacity - 6 l;
- dimensions - 1800 * 850 * 1070 mm;
- weight - 95 kg.
2.3 Motoblock MTZ 09 heavy
Motoblock MTZ 09N - model professional level, which is intended for use in small agricultural production, in public utilities for cleaning snow or debris, and also for transporting goods.
The main advantages of the 09H unit:
- Strong body and wheels that are inflated with air.
- It is possible to control the speed of the electric motor.
- Small noise level.
- High ergonomics of the controls, which makes it easy to operate the device.
Today, MTZ 09 is equipped with power devices of various modifications that consume AI-92 and AI-95 gasoline. Basically, the unit is equipped with a four-stroke single-cylinder 9-horsepower GX270 installation. MTZ 09N with a Honda engine has a power plant volume of 0.27 liters and a shaft rotation speed of 3600 rpm. Due to the increased weight of the unit and the use of unified elements, MTZ 09 is characterized as unpretentious to lubricants and fuel, reliable multifunctional mechanism. The device is easy to operate, maintain and repair.
Specifications:
- weight - 176 kg;
- dimensions - 1780 * 846 * 1070 mm;
- the ability to change the track width - from 450 to 700 mm;
- fuel consumption - 319 g/kWh;
- the maximum weight of the towed trailer is 650 kg.
2.4 Motoblock MTZ 12 heavy
The purpose of the MTZ 12 walk-behind tractor is to perform a variety of agricultural work on land plots from 5 hectares, as well as the transportation of goods and use in public utilities. The walk-behind tractor has a two-cylinder four-stroke 12-horsepower SK-12 power plant, which has a volume of 0.277. The device is not popular, unlike MTZ axle units with less power. This is due to the release of mini-tractors similar in characteristics and more convenient to use.
The design of the device allows it to be converted into a compact tractor, which is equipped with a power take-off mechanism, which allows the unit to be used as a drive for other devices.
It is an undeniable fact that motor-block structures make the work of farmers in endless fields much more convenient and easier. They contribute to better processing and plowing of land. Planting crops has become faster. But you have to walk behind the walk-behind tractor, which causes the operator to quickly fatigue, because the mass of the mechanism is considerable.
Adapters come to the rescue, allowing the operator of agricultural work to sit freely, attach a tow hitch and hang optional equipment. The use of adapters increases productivity by two or even three times.
With an adapter, you can increase the amount of work
Overview of adapters
By design, they are divided into simple and complex (universal). The former can only cultivate the soil, while the latter can also transport various small-sized cargoes. The device is a metal frame with two wheels installed. Adapters are equipped with a short or long drawbar, depending on the power of the walk-behind tractor, as well as devices for increasing the width of the wheelbase and the mounting height of additional attachments.
According to the method of connection with the walk-behind tractor, the modules are:
- Strong adhesion. In such designs, a separate steering wheel is provided, while the wheelset can be placed both in front and behind the mini-car.
- Movable mount. AT this case when the steering wheel is turned, the angle of rotation between the trailer mechanism and the walk-behind tractor changes. The operator's seat rotates. The movable connection requires considerable effort by the driver when performing a maneuver.
In any embodiment, the drive wheels may be located in front of the structure or behind the structure.
In this video you will learn what are the pros and cons of the MTZ adapter:
Currently, the following types of adapters for MTZ walk-behind tractors are successfully used for processing fields and land plots of a small area:
- The arable adapter Celina for the motor-block Belarus is the most demanded in agriculture. When creating a device, only quality materials and are easy to manage. The seat in the module is quite comfortable and does not allow the driver to get tired for a long time. Pneumatic wheels give stability to the structure when working in any soil. Thanks to the band brake, braking of the model is facilitated. Connecting the adapter increases the speed of the machine to 10 kilometers per hour, which is quite enough for agricultural operations. The mass of the arable module does not exceed 50 kilograms.
- Adapter Horses IS-2 to the MTZ walk-behind tractor - turns the design into a small tractor. It has a steering wheel and a seat, the driving pair of wheels is installed in the rear. This mini-tractor perfectly performs the assigned tasks in a small area of \u200b\u200bgardens and orchards. The driver's seat is reminiscent of a motorcycle, which creates comfortable conditions during agricultural work. The control system (gas, brake, turning on the power unit) is located on the steering wheel, which is important for the plant operator. The device can be connected to the MTZ 09N walk-behind tractor of the Minsk plant. Additional equipment is easily attached to it, such as plows, various cutters and a tractor cultivator 06, mowers and diggers, as well as a snow plow.
Types of adapters for MTZ - many There are a number of adapters from other manufacturers. These include:
- APM module for the Neva walk-behind tractor of the Krasny Oktyabr plant. Allows you to attach hillers, plows, harrows, potato diggers and much more equipment. He easily pulls trailer cart. The adapter is available in two types: for one axis and two. It is for this purpose that special kind hitch. Under the driver's seat, the structure is endowed with a spring that absorbs when working on uneven surface soil. A brake pedal is installed near the driver, pressing on which you can easily stop the movement of the walk-behind tractor. Pneumatic tires, which the device is equipped with, provide smooth movement over rough terrain. The assembly of the structure is not a problem, it is quite simple and understandable. If you have any questions, you can look at the instructions, which presents a diagram of the design of the adapter.
- AMPK-500 manufactured by Kadvi, used in combination with heavy types of walk-behind tractors. The drive is mounted on the rear pair of wheels. The body of the towing device can be easily lifted and is able to move loads weighing 500 kilograms.
- EMK is intended for connection of the small hinged equipment. The module provides a driver's seat.
- PMG 300 - motor-block cargo installation allows you to place loads in the back of a trailer up to 350 kilograms.
Advice. Having a walk-behind tractor on the farm, do not be lazy and purchase an adapter. Its installation increases tractive effort at least twice. All work related to the cultivation of the land will pass in an instant.
How to make an adapter with your own hands
AT recent times adapters for MTZ walk-behind tractors are gaining wide popularity. They are much cheaper than others and are combined with almost any type of additional attachments. A home-made adapter for a walk-behind tractor can be assembled by hand using the drawings and connection diagrams, which are detailed on our website. The device is also described here. specifications each sample.
Adapter device model includes 2 wheels, driver's seat, pipes, metal sheets and corners:
- Work on creating an adapter for the MTZ walk-behind tractor begins with drawing up a plan for the device.
- Proceed to self-manufacturing some types of equipment. They start from the base - the frame structure. With help welding machine metal pipes connect with each other. At the end, the transverse pipe must be longer for future wheel installation.
- The next stage is the creation of the body. From sheet metal boards with a height of not more than 30 centimeters are cut.
- The seat is selected and attached to the frame.
Important! On the this stage creating a structure, the seat is selected soft and comfortable, so that later you do not have to digest the structure.
- The assembled structure is checked for stability. At low speed, they travel a certain distance on an uneven surface of the soil. If necessary, changes are made to the design.
- Adapter painting in progress.
A multifunctional module, made with a soul, will never let you down, and the crop grown and harvested with its help will seem much tastier than that sold on the market from other manufacturers.
Loading...