Before proceeding directly to the main types of baby beds, it is necessary to consider the criteria that you should definitely pay attention to when buying.
These parameters include:
Let's consider each criterion in more detail.
Product dimensions
This parameter must be taken into account by all potential buyers, but to a greater extent it concerns the owners of a very modest living space, where parents are forced to allocate strictly limited space for furniture.
- the usual dimensions are 120 × 60 centimeters (the European standard is 125 × 65 centimeters);
- increased dimensions are 140 × 70 centimeters (typical for transformer beds);
- The dimensions of cradles for newborns are usually 97 × 55 centimeters.
Knowing the dimensions is necessary not only to fit furniture into the interior of the apartment. Manufacturers of mattresses, blankets, pillows, bed linen and other bedding are guided by average sizes.
Experts advise taking furniture of common dimensions, so that later you do not have to alter sheets or blankets or order mattresses according to individual measurements. Naturally, this will lead to higher costs.
The main parameters of the materials from which beds for babies are made are no different from the general requirements for children's furniture. The ideal baby bed is durable, environmentally friendly and reliable.
Only a few materials meet such requirements to a greater or lesser extent:
Another material is high quality plastic. Typically, beds are not made entirely of polypropylene, since it is not the most durable. Possible use plastic elements– handles, rivets, but make sure that given material non-toxic.
Product safety
Children's furniture should be safe. This is an axiom that does not require proof. Therefore, about such important parameter like security, need to talk more.
- It is better to choose a crib for newborns and children under three years of age with protective sides that will protect the baby from falling during sleep and wakefulness. The optimal distance between the slats of the sidewalls is 6 - 7 centimeters. If the slats are located more often, the limb may get stuck, if less often, the child's head.
- All components of the product must be in close contact with each other, there should be no gaps and cracks. The tight fit will prevent cases of pinching of the arms and legs, loosening of the structure.
- You should not take an overly light bed, and even with a narrowed base. Such a model is not stable, so that the baby can turn it over. Give preference to a wide bed with a low center of gravity.
- Cribs for small newborns have from two to five levels of bottom height. The highest position is suitable for a child who has just given birth, she will also please her mother, who will not have to bend over three deaths. As the children grow older, the sunbed is lowered so that curious kids cannot climb over the sides.
- A crib with wheels makes it easier to move around the room. However, such mobility can create some problems when the child is excessively active. To prevent unwanted movements of the crib, make sure that there are locks or stops for the wheels.
In addition to the above structural elements, you should pay attention to the overall safety of the crib. All open parts of the furniture must be smooth, and the corners must be rounded. You should refuse to buy a bed with protruding or easily unscrewed parts, as the child will be able to break them off, unscrew and swallow them.
Many pediatricians, including TV doctor E. O. Komarovsky, convince parents not to accustom children to motion sickness and not to solve many children's problems in this way. The sources of children's crying can be completely different and sometimes quite serious.
Defenders of motion sickness give their own arguments: the child gets used to the measured movements during the period of being in the womb, so the motion helps him calm down. A similar effect is achieved when rocking a newborn in bed. Of course, we are talking about smooth, not abrupt movements.
Motion sickness is achieved due to two main mechanisms and design features:
- Skids. In this case, the crib is equipped with curved plates instead of traditional legs, and it is precisely due to this that it becomes possible to rock the baby. When the child grows up, the bed must be fixed with the help of special clamps and stoppers.
- Pendulum. The crib, suspended on the straps, allows you to rock the child lying in it without lifting him on the handles. The pendulum mechanism can be longitudinal (along the child's body), transverse (across the body) or universal (swings in both directions).
If you choose baby cots with a pendulum, don't forget one important nuance. Depending on the type of rocking chair, you need to add at least 10 cm to the length or width for more comfortable rocking.
In addition, you should remember about the function of fixing the bed with a pendulum mechanism in order to prevent the rocking of the structure (and, as a result, its overturning) by an older child.
Choosing a bed is half the battle. For a comfortable and restful sleep, you need to purchase an “ideal” mattress. Briefly describe what requirements apply to this bedding.
First of all, the mattress in the crib must be suitable in size. If you place too small a mat in the bed, then the child will be able to stick his fingers into the gap between it and the sides of the bed. If you take an oversized mattress, then it will become deformed, go "bumps", which will disrupt children's sleep.
Do not rush to take too soft bedding. The main requirement that is imposed on the surface of the couch is optimal rigidity and evenness. This is very important for the proper formation of the spinal column.
To buy the best mattress, you should ask about its “stuffing”. Refuse to purchase a filler made of cotton wool or foam rubber. The first rolls up quickly, and the foam layer does not allow air to pass through well, so the child will sweat.
Optimal fillers are horsehair, woolen threads, felt, dried seaweed, coconut fibers. In addition, you should pay attention to the coverage. It should be waterproof, anti-slip and soft to the touch.
Another important point– choice of pillow. Do not put a head roll on a child under 12 months of age. The baby should lie on as straight a surface as possible. In some cases, a thin cotton sheet folded in several layers is placed under the head.
Bed linen is selected only from natural fabrics: cotton, terry, flannel. For a baby bed, you will need several duvet covers, large and small sheets. Linen is changed daily, the mattress is regularly dried to prevent mold.
Babies get and give a lot of different dowry: diapers, sliders, diapers, bed linen, play accessories. In such situations, a bedside box comes to the rescue. However, such an element is not found in all models, so parents should decide for themselves whether you need it or if you can get by with a bedside table.
On sale you can find round transformers, which can be a cradle, an arena, a large bed, a sofa, an armchair with a table. Round crib - unusual design, which will not get bored due to the variety of transformation options.
Advantages:
- multifunctionality;
- stylish appearance (round beds are available for sale);
- the presence of all kinds of additional functions (changing table, storage boxes);
- you can buy furniture with a motion sickness function;
- The crib can be used up to 12 years of age.
Flaws:
- high price;
- massiveness and impressive size (not suitable for a small living space);
- the bed is quite narrow - only 60 centimeters (this is a minus in adolescence).
Transformers are great kids functional cribs from 3 years old, but they are also suitable for newborn babies. If you need a "long-playing" bed, you have extra money, then this model is the best choice.
The Valle Allegra transformer is a practical, multifunctional crib, regularly included in the rating for newborns and older children. The furniture is made of safe chipboard, it is stylish and attractive in appearance.
The design includes drawers, shelves for storing sheets and other linen. There are sides on the side cabinet, so the crib is additionally a changing table. The furniture will last up to 7 years of age.
Pros:
- pendulum mechanism that helps to rock the child;
- attractive appearance;
- numerous additional features(chest of drawers, drawers, changing table);
- ventilated bottom by the bed;
- sidewalls are equipped with protective overlays;
- is relatively inexpensive;
- stable and reliable construction.
Minuses:
- fairly heavy construction;
- non-informative instruction;
- not always high-quality processing of parts.
Arena
It is a foldable design that is convenient to use when traveling. Such beds are made of lightweight materials - aluminum, plastic and textiles. All parts can be washed, so maintenance is never a problem.
Combining the functions of a bed and an arena, the design still differs from the classic crib in large sizes. But the functionality is usually preserved: you can change the level of the couch, there is additional equipment in the form of a table for changing, mobile, baskets for toys.
Another convenient little thing is the fastener on the sidewall, which allows the grown-up child to independently open the structure in order to get out of it “to freedom”. Parents' reviews show that they value such cribs for maneuverability and mobility.
But if you are considering cribs for a child from 3 years old, then a playpen-shaped bed will not suit you. Such models have age and weight restrictions: up to 36 months and up to 7 kilograms (some beds can be used up to 15 or even 25 kilograms).
Advantages:
- ease of construction;
- the crib can be taken to the country or on trips;
- sidewalls are often made of transparent plastic, so you can track the actions of the child;
- bright design;
- multifunctionality.
Flaws:
- single-level beds are too low for mother and child;
- two-level beds are distinguished by a too low protective side, so that the baby easily overcomes such a barrier;
- the design is too unstable, the child will be able to turn it over;
- there is no possibility to rock the baby;
- without rigid rails, it is more difficult for a child to rise and stand on his feet.
The playpen is not very suitable as a permanent "bed" for small child. But for use as a play space or a “camping” bed, it is the best fit.
happy baby martin
The playpen is suitable for both newborns and older children. At first it is used as a sleeping place, and then smoothly turns into a comfortable play space. Made from quality materials.
Large windows help provide ventilation. In addition, parents can watch their baby sleep or play. And the available wheels will allow you to easily move the device throughout the apartment. The set includes a removable mattress.
Pros:
- combines the functions of a crib and a play area;
- quality performance;
- easy to fold, you can take with you on a trip;
- there are wheels for moving;
- the corners are protected by special anti-traumatic pads;
- there is a pocket for small items;
- has 2 levels of bed: for newborns and older kids.
Minuses:
- rather heavy construction for arenas;
- the minimum number of colors;
- seams not very even.
happy baby martin
Separate conversation - a bed for twins. In this case, everything will depend on whether the children's sleep and wake patterns coincide. If the kids fall asleep and wake up at the same time, then at first you can limit yourself to a common bed.
Some pediatricians advise laying newborn twins together, as this way they will quickly get used to a new life. The only disadvantage of co-sleeping is that parents can confuse the kids. And this is dangerous if one of the babies needs to take a certain medicine.
But even if you put the babies together in the first months of life, after a while the grown-up twins will still have to be separated. What options do experts offer?
- two separate beds. However, they do not have to be the same. Parents themselves decide what to buy for each child. In some cases, sleeping places are even organized in different rooms;
- 2-tier bed. Similar design, often created by custom order, resembles bunk furniture for teenagers. Simply put, one classic bed is placed on top of the second. Moreover, each tier has its own protective and removable sides;
- adjacent bed. In this case, the design is two classic beds, standing side by side together. There is a barrier in the middle, and the sidewalls can be removed. Such a bed must be placed with the headboard against the wall in order to free access to children from both sides.
An adjacent bed or crib, consisting of two tiers, is not a cheap pleasure. That's why many mothers and fathers who are lucky enough to become parents of twins are advised to buy two classic beds. They can always be placed next to each other or placed on different sides of the parent bed.
Where to buy a crib for a newborn?
The best options for buying a baby crib are well-known children's supermarkets and popular online stores. Here, experienced consultants will tell you how to choose a crib for a newborn. In addition, the risk of buying low-quality goods is minimized.
Choosing a baby crib on the market or an unknown site is fraught with various problems. For example, you can run into a fake or a cheap product made from low-quality materials that can harm infant health.
Often parents buy beds that have already been used. This is a completely acceptable solution, but only if the product is perfectly preserved, has no damage. But the mattress for the newborn in the crib will have to buy a new one.
Another question is how much you have to pay for such products. The cheapest models cost from 2,000 rubles, but cribs in the price range from 4 to 17 thousand rubles are the most popular with domestic parents. Premium beds are also available for sale for several thousand dollars.
What determines the cost of goods? It is curious that the number of zeros in the price tag is affected not so much by the material from which the bed is made, but by additional functionality (a pendulum crib will cost more classic version), appearance and, of course, the brand.
However, one should not chase products of well-known trademarks. There are relatively cheap and quality models domestic companies. If you buy them in a reliable store, they will be an excellent sleeping place for a newborn baby.
How to choose the right crib for a newborn?
When buying a baby bed, there are no trifles. Judge for yourself, a too strong smell of paint or varnish can cause an allergic reaction, and unsanded wood leads to splinters. That is why experts advise to adhere to certain rules and recommendations.
Buy a crib a few weeks before your baby is born. Furniture must be unpacked and placed in a well-ventilated area. In this case, a not pronounced specific aroma, which often accompanies even high-quality products, will disappear.
A few important "no"
A few important "yes"
1. Be sure to decide on the place where the crib will stand. This will allow you to clarify the dimensions of the product and, accordingly, choose the desired type of furniture (cradle, classic, transformer, arena).
2. Specify what features a crib for a newborn should have. Is it important for you to be able to:
- change the level of the couch;
- swaddle the baby on the accompanying changing table;
- rock the baby;
- move the bed with the help of wheels;
- remove sidewalls;
- store things in a special underbed box;
- protect the child (and furniture) with silicone pads;
- turn the cradle into a full-fledged teenage bed;
- use the product as a playpen.
3. Read reviews of mothers and fathers who have already purchased models of cribs that you like on the parent forums. Such reviews allow you to find out the shortcomings of seemingly high-quality products.
4. Purchase goods only from trusted sellers. It can be either a well-known children's supermarket or a trusted online marketplace. This will reduce the risk of counterfeiting and help you get your money back if you buy a low-quality product.
When making a purchase, be sure to familiarize yourself with the package of documents: a certificate of conformity and a hygiene passport. All documentation received from the seller (coupon, check, etc.) must be kept until the expiration of the warranty period.
Summing up
Which crib is best for a newborn? One that suits him in all respects and takes into account his individual characteristics. Properly selected bed is the most important condition for a calm and healthy sleep, and therefore, full development.
That is why the questions of which bed is suitable for a small child, which blanket to choose for a newborn, how to choose a mobile with hanging toys, are very important for creating a bed and improving the quality of a child's life.
A comfortable bed, a soft blanket, a favorite toy - all this is important to consider when equipping a children's room. The furniture and bed linen chosen with love and taste will help the baby develop, explore the world, sleep better and spend waking minutes more fruitfully.
21/02/2018
about. Andrey Chief
What furniture to prefer - from pine or birch
Natural material is durable, and therefore always in fashion. Especially when it comes to the interior. Therefore, the variety in stores often leads the buyer to a dead end before the banal question - what to choose? Indeed, what to prefer if from the available environmental materials on sale - furniture made of pine and birch?
What do you need furniture for?
Specifically, it is this furniture that you are now standing in front of in the store and racking your brains whether it is worth buying it or not. Suppose you are clear about its purpose and, choosing solid wood furniture, you are aware of the durability and environmental friendliness of natural material. But where will she be? In the bedroom or in the kitchen? In an apartment or country house? By answering these questions, it will be easier for you to decide which furniture to prefer. So, the pros and cons of furniture from natural wood.
Pine or birch?
Speaking briefly about appearance, pine furniture has a more pronounced texture of wood, its fibers, than birch. Pine is more difficult to process, but it is easier to tolerate increased moisture, unlike birch. Pine - if the style of your home is rustic, old Russian, country or just country house. And if you have a poor idea of the appearance of a birch product - remember an ordinary sheet of plywood, furniture made of birch will have approximately the same texture.
Nevertheless, it is birch that is considered more environmentally friendly than pine, better suited for noble interior, well tinted, has bactericidal and antifungal properties.
What will last longer - pine or birch?
Now about strength - birch is stronger than pine. As a rule, for pine products, load-bearing elements are made of birch, for example, legs of beds, tables. Chairs are also made of birch. The chair experiences significant cyclic loads during the period of its use and over time these loads lead to loosening of the joints. Everyone remembers swinging stools. Therefore, birch is a stronger wood species that allows you to extend the service life of products.
Pine products are more prone to scratches and dents, because. pine is softer than birch, so you should not buy pine furniture for children to use, it is better to stop at the birch version. Birch is considered the best option for children's rooms. Pine, on the other hand, is most suitable for kitchens, as solid pine furniture is water-repellent. Another plus is the pleasant smell that pine will spread in your home.
What is more expensive?
Let's say you have decided - you want to choose birch furniture for the children's room. They say that the wood is solid, and the bed is strong, and the wardrobe is resistant to daily opening and closing. And now we look in the wallet, because your next question will be - is there enough money. Solid birch furniture is 30-60% more expensive than solid pine furniture.
production costs
When choosing, pay attention to the manufacturer. Since both solid pine furniture and solid birch furniture, for all its useful properties and natural beauty, before entering your home, must pass correct finish. board must be dry naturally, wood - competently processed, all the right technologies, and these technologies, even in the production of semi-antique furniture, must be modern so that the furniture looks beautiful and lasts a long time.
What wood furniture do you prefer? What parameters are fundamental for you? We are waiting for your comments!
The Furniture House "Usadba" was with you. 3% discount for all subscribers
The range of cots for newborns is not just great: it is huge, and getting lost in the sea of opportunities is much easier than doing it. right choice. Meanwhile, after the birth and in the next few months, the child will spend most of the time in bed.
Which is better - cradle or classical? Take a standard version or a transforming bed?
What are the advantages and disadvantages of arenas? Specialists of the online store "Daughters-Sonochki" give useful advice so you can make the right decision.
The main types of cribs
Cradle
An option for the smallest, from birth to 3-6 months, but the manufacturer provides for the possibility of using such products for up to a year (until the child's height reaches 80 cm). After the cradle, the baby moves to the crib.
The undoubted advantages of this product include its small size (at first, the child may be afraid of unlimited space, and the cradle becomes perfect place for sleeping a newborn) and the ability to rock. As a rule, this type of bed is equipped with handles for convenient transportation of the basket along with the baby.
The cradle can have a stationary stand or be installed in a baby bed with straps. The first option, as a rule, is noticeably lower, and therefore outperforms the “classics” in terms of ease of use. This advantage becomes apparent during night feedings, when several times a night it becomes necessary to pick up the baby in your arms and return it back to the cradle.
The cradle can be placed next to the parent's bed: then the baby will be constantly in sight.
Transformer
It is a product that combines the function of a bed and another piece of furniture - usually a changing table and / or chest of drawers. Some models turn into teenage models when transformed; the upper sides form a table, complemented by a pedestal - a former chest of drawers.
Transformers are designed for babies from birth to 6-7 years. As the child grows older, additional elements are removed, thereby increasing the length of the bed. Some models “know how” to lengthen even more and are suitable for sleeping until the child reaches adolescence.
Arena
Folding models are combined under this name; They are convenient to use when traveling. The arenas are made of light materials - metal, plastic and special fabric. All elements are easy to clean, so there should be no difficulties in caring for them. Beds of this type do not need to be supplemented with a mattress, but if desired, it can be purchased separately.
Given the specifics of the application, the arenas differ from the “classics” in size: as a rule, they are slightly shorter and wider than the standard ones. In terms of functionality, this type of baby bed is in no way inferior to the standard options: they also have an upper level of the bottom, which is used from birth to three months, additional elements such as a changing table and shelves for cosmetics, a mobile for toys, a hood and a pocket for small things. A handy feature is the zipper on the side wall, which allows the child to independently open a hole for himself to get out of the crib.
AT recent times arenas are often purchased for stationary use - it is convenient for parents to deal with a light, maneuverable bed that can be moved around the apartment during the day with the baby in it.
What should be a crib?
As for the age of the child up to which this version of the crib can be used, due to the specifics of the design, the manufacturer usually limits the upper bar to 3 years, often also in conjunction with the designation of the weight limit mark: there are models that can be used for children no heavier than 6-7 kg, there are more stable options - up to 13 or 15 kg. It is clear that by the age of three, the baby can outgrow these marks.
Dimensions
Unfortunately, not everyone can boast of a large living space, and often a crib has to fit into a very limited space, when literally every centimeter counts.
The usual dimensions are 120x60 cm. But you can find models from 59 (cradle) to 180 cm long, and the width varies from 42 (cradle) and 55 cm to 140 cm.
If you choose a bed custom sizes, think about whether you can pick up bed linen and a mattress for it.
Possibility to change the level of the bottom
It is possible to change the height of the bottom for almost everyone; but the number of levels may vary - from 2 to 5. Five levels are important for those who practice co-sleeping, when it is important to match the bottom of the crib with the height of the parent's bed.
The bottom is set to the upper level for the smallest: then it is convenient for the mother to lay the baby. Later, when he learns to sit down and rise, the bottom must be lowered. It is important that the lower level is located at a distance of 60-65 cm from the upper edge of the sides, i.e. if the child will stand in the crib, the top rail should not be lower than his armpits.
Availability of car wall
Autowall is the mobility of one of the side walls, which can be lowered and raised. Serves the same purpose as changing the height of the bottom, but if in order to move the bottom level, it is necessary to disassemble and reassemble the bed, then the car wall can be moved literally in one motion
Rocking runners
Instead of legs, the crib can be equipped with curved skids, which, if necessary, allow you to rock the sleeping baby. When the child gets older and already rises on his own, the bed needs to be fixed in a stationary state: if your choice falls on a model with runners, be sure to check if there are special latches.
wheels
If you plan to move the crib around the room, including with the child in it, you should purchase a model equipped with wheels. By the way, removable wheels can be combined with skids, however, with the wheels installed, the rocking function does not work.
Also, keep in mind that moving wheels can create a lot of problems when the bed is not fixed, say, between a wall and the parent's sleeping area. To prevent movement, wheel locks will not be superfluous.
pendulum mechanism
It is a movable suspension for a newborn on belts, which allows you to effectively rock the baby without taking him in your arms. The pendulum can be longitudinal (along the body of the baby), transverse (respectively, across) or universal (swing in two directions).
Consider this point: depending on the type of pendulum, it is necessary to take at least another 10 centimeters to the length or width of the crib in order to swing it. There must be a possibility of fixation, so that as the baby grows older, he cannot swing himself.
Download or not?
Doctors believe that it is not worth accustoming a child to rocking, and the tendency to “pump in” the pain of an infant in this way is considered unhealthy, since the causes of crying can be very serious.
Supporters of motion sickness put forward their arguments: the child is accustomed to rocking - the mother's walking during pregnancy, and in case of anxiety, rocking allows him to return to a harmonious emotional state. It is clear that this is not about intentional shaking, but about smooth walking with a child in her arms. Approximately the same effect can be achieved if you rock the baby in a cradle, crib or stroller.
Interview
How much did you use the swing crib?
- Actively used - 28%
- Used little - 36%
- Didn't role at all - 36%
The following people took part in the survey:
437
human
Drawer in under bed
A baby's dowry takes up a surprising amount of space, and a roomy drawer under a newborn's crib does a great job of storing diapers and clothes, and later toys. Many models are not equipped with a drawer, so we advise you to immediately decide whether you need it. If you purchase a stock without a box (such options are cheaper), but later feel that you need one, it will not be easy to find the right container in size and style.
But even with such a “little thing” as a box, in an ill-conceived design, difficulties in operation may arise: for example, some of them roll out from under the bed on their own (especially true for models that have skids or a pendulum mechanism). Other buyers note that if the box is without a lid, then dust accumulates in it - you have to pack its contents in bags, because, as a rule, it is children's things that are stored in the box. If these moments are fundamental for you, it makes sense to consider the assembled model in the store, and only then make a purchase decision.
The number of boxes for different models may vary.
Silicone pads
They are located on the upper rails, but their relevance increases during the period when the child is teething. If we neglect this point, we will have not just gnawed slats, but the main thing is constant anxiety that the child will bite off and swallow part of the coating, and worries about the safety of the first teeth.
Silicone pads, made of the same material as the teether toys, are completely safe, protecting the baby's teeth and bed rails from damage.
Completeness with a mattress
Usually mattresses are sold separately, so the buyer gets the opportunity to individually select the appropriate option. It makes sense to look for the “right” mattress (Read the article “How to choose a children’s mattress”). As for the dimensions, the gap between the mattress and the walls should be minimal, no more than 1-2 cm.
If the mattress is included with the crib, you get rid of the need for a separate selection of this important element.
Bottom version
The bottom can be rack or solid. The advantages of the first option are that the mattress is constantly ventilated. This means that unpleasant odors and moisture will not linger in it.
Removable rails and distance between them
A grown child constantly strives to get out of the crib, but it is clear that he is unlikely to be able to climb over the side and not fall. It is still too early to remove the side wall - the baby can easily fall out in a dream. But if the side wall slats are removed, we get perfect option, in which the child himself, without the help of parents, has the opportunity to get out, but there is no threat of falling during sleep.
As for the distance between the slats, it is desirable that it be within 6-7 cm: if the slats are located more often, there is a high risk that the handle or leg of the crumb will get stuck between them; if less often - the head.
beautiful excesses
Sometimes beauty is put by the manufacturer higher than safety and ease of use. Well, if you have the opportunity to inspect the already assembled bed, make sure that it does not have sharp corners that the child and parents can hit.
Let's say, beautiful elements - knobs. In practice, they bring a lot of trouble: sleeves constantly cling to them and elbows hit. The same can apply to the curly edge of the headboards.
Production material
Traditionally, baby cribs have been made from wood, a natural, breathable material that is considered best for babies. Today, wooden beds are in serious competition with metal ones, as well as those made from chipboard and MDF.
Specialists concerned about the health of the child have no complaints about wood, but only if safe varnish or paint was used to process it. For production, alder, beech, oak, maple, birch and pine are used. Pine cribs are the cheapest, but they are the most soft rock wood, i.e. Traces from the baby's teeth will definitely remain on it.
MDF is tile material from wood fibers. Its advantage is increased reliability compared to wood; in addition, it is safe, since no harmful resins are used in its production. Variations in the use of this material are different: there are beds that are made exclusively from MDF (manufacturer Vlana), there are options where MDF and chipboard (Vlana), MDF and wood are combined.
But chipboard often emits formaldehyde, and although cribs with its use have a very attractive cost, we advise you to refuse such an acquisition. If your choice fell on a model made with using chipboard, ask the seller for a hygiene certificate and a certificate of conformity to personally verify that during production harmful substances were not applied. Products from a combination of MDF and chipboard are available from a manufacturer such as Vlana.
Metal is used to make very durable and, as a rule, extremely attractive models of baby beds, which are in the assortment of the Lider Kids manufacturer. If the plans are to purchase a bed that can be used for both the second and third child, then a metal crib will do the job. Possible disadvantages of metal structures include their high cost.
Having set priorities, you can easily form a list of the most preferred quality and functional characteristics for yourself, and only then decide on a specific model. With this approach, you will never have to regret the perfect purchase.
THREE "NOT" WHEN PURCHASING
There are no trifles in the production of beds for newborns. The smell of varnish can cause allergies; improperly processed wood - small splinters; chipped plastic elements-cuts.
The specific smell of a new crib is a common phenomenon, but, of course, it should be a barely noticeable aroma, and in order to avoid the occurrence of allergic reactions, the purchased and unpacked purchase must be kept in a ventilated room for at least two to three weeks: after the specified time, the smell should disappear. This feature is the main reason why experts advise purchasing a bed in advance, at least two weeks before the expected date of birth of the child.
Specialists of the Daughters-Sonochki online store recommend paying attention to the following aspects that will help you avoid purchasing a low-quality, and therefore unsafe crib for your child:
Important
- Do not purchase a bed that has irregularities in the processing of the frame or visible damage: even small crack poses a great threat to the health of the baby.
- If the bed is made using varnish or paint, do not be too lazy to look at the hygiene certificate and the certificate of conformity: it records what materials were used in the manufacture: lead and formaldehyde should not appear among them, and the “correct” paints are made from resins on water based; do not purchase a crib that emits a noticeable smell of paints and varnishes.
- Refuse to buy if plastic and metal elements not "recessed" into the frame material.
Does a high price guarantee impeccable quality?
The quality and cost of a baby bed are two quantities that are not directly related to each other. The lower threshold of the price tag starts from 1,500 rubles, but the best demand among Russians is for models that are in the range from 3 to 15 thousand rubles. The upper bar of cost is limited only by your financial capabilities.
Of course, famous brand- a relatively reliable guarantee of quality and safe execution beds. But inexpensive and simple models with the right mattress and purchased from a reputable store or chain (rather than the market or handmade) can also be a good and healthy place for your little one to sleep.
What is the cost of the product? Oddly enough, the material from which the stock is made does not play a primary role in setting the price, but it is significantly increased by additional features (for example, a pendulum), design and, of course, the brand.
Star Choice
- Singer Beyoncé purchased for her beloved daughter a spacious and exclusive Vetro bed from NurseryWorks, made of transparent acrylic and equipped with a mattress from the same manufacturer. The cost of such a luxurious bed was 3.5 thousand dollars.
- Actress Dana Devon has much more modest requests: she opted for the elegant Star Finial metal bed from Corsican Iron Furniture in classical style, with hand-finishing, thin rods and high knobs costing “only” 1.7 thousand dollars.
WHERE TO BUY A BED?
The best option for making a purchase are large chain and good online stores: the opportunity to purchase low-quality goods there is minimized.
Purchasing on the market is associated with a number of risks - for example, the prevalence of fakes; cheap cribs made of low-quality materials that pose a threat to the health of the baby.
With regard to the purchase of a bed that has already been in use, this is allowed on one condition: the product is not damaged. But the mattress needs to be replaced with a new one.
It is important when choosing to pay attention to:
- Decide where the bed will be placed; based on this, determine the desired dimensions of the product
- Decide on the type of crib (cradle; classic; transformer; playpen bed) and the material from which it should be made (solid wood, MDF, chipboard or metal)
- Decide on the desired functionality of the selected product
- whether it is necessary to change the level of the bottom
- possibility to lengthen sleeping place(for transformers)
- Is it important to have an auto-wall and the ability to remove the side wall?
- the presence of skids for swinging (and the ability to fix them in a stationary state)
- the presence of wheels (clamps for them)
- pendulum mechanism (and its type - longitudinal, transverse, universal - taking into account the space that you are ready to allocate for placing a crib)
- drawer in under bed
- silicone top rails
- complete set with a chest of drawers and / or a changing table (for transformers), as well as variations of the subsequent transformation: into a teenage bed plus an addition: a free-standing chest of drawers, desk with pedestal, bedside table, dresser and bookshelves; we also advise you to consider purchasing the bed, chest of drawers and changing table (or changing board or mattress) separately
Crib selection example
You are about to have a baby; the room in which he will be located is small, and the space allotted for it is limited to 130x130 cm; enough to sleep a baby up to three years. Thus, a standard bed 120x60 cm will fit here, and there is even an extra bed.
Popular manufacturers
Well-known manufacturers carefully monitor compliance with the technology of manufacturing children's goods. According to buyers, the products of the following companies are distinguished by special reliability, beauty and thoughtfulness of the design:
- a red star
- Kubanlesstroy
- Gandylyan
- Vedrus
- RIO-SP LLC
- SKV-Company
- Carat
conclusions
Important requirements that the bed must meet are the ability to change the level of the bottom, the pendulum mechanism, silicone pads and the drawer. The desired material from which the product should be made is a strong tree so that the next children do not need to purchase another one. Because the space is limited in length, but there is a margin in width, the pendulum mechanism must be transverse.
All of the above requirements are met by cribs from manufacturers Kubanlesstroy, Krasnaya Zvezda.
A high-quality and beautiful crib is one of the most important factors that ensure healthy sleep your baby and him harmonious development in the first months of life. But acquiring is only half the battle. You are also expected pleasant chores on the choice of bed linen, the selection of soft sides (bumpers), a canopy, toys for the crib.
Expensive event for parents. To cut costs and furnish children's space furniture, it is not necessary to buy it. One of available options- a crib, you can make it even if you have no skills.
Before proceeding with the manufacture of the crib, it is necessary to make a calculation taking into account its design and prepare necessary materials. The bed, made according to individual measurements, will not fail in operation.
When taking measurements, accuracy must be observed.
Structural calculation and drawing
The choice of materials for assembly
When choosing materials, it is better to give preference natural materials, an array of wood and plywood is ideal for this purpose. The use of natural materials will save the child from toxic effects. You should purchase the necessary fittings, fixtures and other materials, taking into account the design of the bed.
Use only well dried, without visible damage and knots, wood.
Necessary materials
The most expensive part of the cost will be on the mattress. It’s not worth saving on buying a mattress, from
its quality depends on the health of the child.
Orthopedic mattress guarantees a comfortable sleep and eliminates the problems of incorrect body position during sleep.
Where to start assembling a crib
When assembling, the screws must be tightened so that they do not stick out.
Assembly of linen boxes
Once the base is prepared, you can start making cabinets. Usually there are 1-2 lockers with a sliding mechanism in the crib. The base is made from solid wood and the bottom is plywood.
If the child is small for him, you can independently make a developmental rug.
- The cut material is sanded and assembled according to the drawing;
- Provide lockers with a sliding mechanism, it is attached to self-tapping screws;
- In order for the lockers to open conveniently, it is necessary to attach the handles.
Backrest or headboard
Depending on the type of crib, it can be decorated with additional elements - a backrest or a headboard. wooden back save the child from touching the wall during sleep and protect the wallpaper.
While the headboard will allow you to comfortably position the pillow. The combined models provide for the placement of the back and headboard.
- According to the drawing, it is necessary to cut the solid wood according to the shape of the intended back. Standard back height: 70-90 cm;
- Before fixing the back or headboard, do not forget to sand everything with sandpaper;
- As fasteners, instead of self-tapping screws, it is better to take long bolts.
The details of the headboard, footboard and backrest are best left wooden, in this form the crib can be washed.
Finishing work
At the moment when the crib is assembled with your own hands, you can start decorating it. You don't need any special research for this. Natural wood is absolutely harmless to the health of the child. So that its surface is well preserved and acquired smooth surface, wooden details must be coated with a non-toxic varnish. If the design provides for bright colors of the crib, it can be painted acrylic paint.
You can not paint the crib in a residential unventilated area where there are children.
DIY bed making video
Detailed video material will allow you to make a crib out of wood, followed by painting with acrylic paint. The author of the video explains all the working moments, from cutting parts to assembly.
Types of baby beds
Choosing a baby bed in favor of a special design poses a difficult task for parents. different models beds are classified according to functionality and dimensions: 
- cradle bed for newborns measuring 90 x 45 cm;
- standard cot-playpen measuring 120 x 60 cm;
- cot for preschoolers with drawers measuring 140 x 70 cm;
- bed transformer size after transformation 190 x 80 cm;
- bunk bed with drawers and ladder for lifting;
- non-standard beds in the form of a sports facility.
Cradles and cots in the form of an arena are designed for children from birth to three years. Using the schemes presented on the Internet, you can make any model or in accordance with your own design. dyed in White color crib, can be decorated with decoupage technique and a removable canopy made of harmoniously selected fabric.
Cot for children from 3 years to younger school age will give comfort during sleep and rest. Spacious lockers for retractable mechanisms allow them to store 
Kids' things. Due to the simple design, it can be done in a few days. The presented model does not require additional decor. Unpainted wood looks natural and natural. Contribute bright colors bright pillows and soft toys will help.
A transforming bed will help out in a situation where you need to save space. A transforming version of a bed for a child can be bought at a store or created with your own hands according to the drawings. Bunk beds also allow you to save space in the children's room.
The upper tier of the crib must be equipped with protective railings.
Beds of unusual shapes
Special delight in children is caused by cribs of unusual shapes.
It is a mistake to think that an amazing sleeping place cannot be made by yourself. Using the drawings, you can make cribs of various shapes. Men who love working with wood can try their hand at making a car bed.
Having built a bed in the form of a sports facility, you can combine a play and sleeping place into one whole. A crib with a slide or a fabulous house will be appreciated by active children. Having studied the complex design, such a model can be made with your own hands. As an addition to the bed, use additional drawers and compartments for storing children's things.
What material is best to make a bed?
The undoubted leader is natural wood of valuable species.
- The most common and available material- an array of pine;
- The use of alder will allow you to get a bed of noble colors;
- A beech bed will last for many years, it will not creak, crack or loosen;
- The beautiful structure of the ash tree will give the piece of furniture a natural gloss;
- The use of solid oak will allow you to get an exquisite bed in which you can raise several generations of children.
Homemade bed with your own hands - practical solution for decorating a nursery. The design of the presented models is quite simple, so it is within the power of a novice master to make it. Using the instructions, drawing and detailed video material, it is quite possible to make a bed for a child.
A bed, namely a sleeping place, is important for every person, not only because of the interior addition of space, but also from the side of health. And therefore, in addition to an attractive appearance, it should provide a positive effect on the body and human well-being.
With such reasons, buyers are increasingly making their choice in favor of wooden bed, which has the corresponding capabilities. But, despite the fact that the assortment is incredibly large, only a solid bed can combine the appearance and the main qualities of wood.
What is the best wood for a bed?
Before choosing the most suitable version of the bed, you need to clarify what kind of material it is made of and what qualities it has. The fact is that the material forms not only the appearance of furniture, but also provides durability, reliability, strength and other properties.
In essence, the types solid wood, which can be used to create beds, there are not so many:
Pine. The tree is naturally healing and healing. Therefore, since ancient times, it has been used to make beds. Strength is guaranteed due to the resinous nature of the pine, which it is endowed with by nature itself. Among other things, there is security in relation to negative impacts insects, rodents, germs and harmful bacteria. As for the cost, it is very moderate for the average buyer.
Alder. Such a tree is quite soft and pliable in its structure, so it can be easily processed and can be used for making carved elements. The beautiful shade of the material will perfectly emphasize all the advantages and features of the interior.
Beech. This type wood is a valuable material, because it combines strength, beautiful appearance, durability and mechanical resistance to external influences.
Ash. Wood of this type is strong, but at the same time very elastic and pliable. Of course, solid ash beds are heavy, but the appearance attracts and fascinates everyone.
Oak. Traditional solid wood for the production of beds, as there is the required strength, a large range of shades and colors. Yes, and there is an opinion of designers that oak in the interior helps to create a special atmosphere for restoring strength and energy.
Types of solid wood beds.
Have you already been able to choose the material that suits you for the bed? In this case, you need to choose the bed itself.
A single bed is, first of all, a sleeping place for arranging small rooms where one person lives, so there is no need for big bed. As a rule, such beds are made of inexpensive material, for example, from pine, which, in addition to quality, is also distinguished by low cost, so literally anyone can afford such a purchase.
Double beds made of natural solid wood are options for a couple's bedroom. A bed made of natural solid wood allows you to fully relax and unwind, because, since the bed is large, it will provide a healthy and sound sleep. As a rule, such products are decorated with decorative carvings to emphasize the appearance and sophistication of the entire space. If the bedroom is decorated in a minimalist style, then alder or bleached oak is used due to the interesting appearance and the very affordable cost of the material.
Loading...