How to repair vertical blinds rope broke. Do-it-yourself horizontal and vertical blinds repair. Vertical blinds

Blinds with proper care will last a long time. But it happens that a malfunction of the device takes you by surprise, then the repair of the blinds is simply necessary. The cause of the breakdown can be the wear of the device, which does not come soon when high quality products and influence external factors. For example, pets can be the cause. With all types of breakdowns, you can handle it yourself without any difficulties. The main thing is to know what and how to do.

Blinds are divided into two types: horizontal and vertical. Each species has its own faults. Some of them are repeated, others are unique. Consider the basic operations that you may encounter when repairing blinds.

Repair vertical blinds includes:

replacement connecting chain.
Replacing the chain for regulation.
Installing a new shoulder.
Installing a new control cord.
Complete replacement of runners.

Adjustment horizontal blinds suggests:

Repair of hooks and clamps.
Replacement of the control cord.
Installation of a new lifting and turning mechanism.
Repair and installation of a horizontal bar.

We will try to consider the essence of all problems and give recommendations on how to repair each type and what mistakes should not be made during repairs.

Vertical blinds

Connecting chain. The slats of the blinds are connected by a chain. Often this chain breaks, as it is very thin. Its repair is very simple: you need to buy new chain and install it in place of the old one. But before you buy, you need to measure its length. It is important to measure the width and count the number of structural elements. To this number add a couple of centimeters of stock.

Replacing the control chain. The fault is extremely rare, but not excluded from the list. To replace, you need to remove the side cover and the plastic gear. Next, connect the chain at the break point or install a new one, fixing it on the gear. Place the cover back.

Installation of a new hanger. This is the element that connects the fabric to the cornice. Breakdown happens very often. First you need to purchase a new shoulder. But first measure the width of the lamella. Next, you need to dismantle the broken element and install a new one in its place. The process is very simple: the shoulder is attached to special teeth, and changing it is not difficult.

Replacement of the control cord. Breakdown is extremely rare. Most often, the cord simply wears out and begins to function poorly. Before buying a new cord, you should measure the length of the old one. To do this, you need to measure the height and width of the blinds, and then multiply by 2. When the cord is purchased, you need to thread it through the cover and runners and fasten it to the fixed element in a lapel way.

Complete runner replacement. To buy runners, you need to measure the width of the slats. The following is a step by step process:

Remove the control cord.
Remove the shutter control mechanism.
Remove old runners.
Remove broken item. Usually they unfasten.
Insert a new slider at the required distance. When the slider locks in, you will hear a click.
Pass the control cord through all the sliders.
String all the elements on the shaft.
The control mechanism must be securely fastened so that it does not play.

Thus, the repair of vertical blinds is completely completed, and the device will last more than one year.

Horizontal blinds

Repairing blinds of this type is a little more difficult. Consider the main types of breakdowns.

Most often, horizontal blinds require replacement or repair of hooks and latches.

They are responsible for turning the lamellas. Replacement is extremely simple: you need to dismantle the old element and install a new one. The main thing is to buy those parts that fit in size and diameter.

Installing a new control cord. It is necessary to buy a new element, having previously measured the length of the old one. The following are the step by step steps:

Eliminate the remnants of the old element.
Thread through new cord between cylinder and shaft.
Pass the cord through the basket, which is located near the ladder.
Run the rope between the ladder directly into the cornice space.
Pass the cord through the needle and pull evenly through both ladders.
Pull the cord through the plug and secure with a knot on each side.

Installation of the lifting and turning mechanism. It is important to remember how the parts are located so as not to lose anything and not to forget the place of each of them. Otherwise, the mechanism cannot be assembled. Step by step:

First you need to remove the side plugs and remove the shaft.
Dismantle the old mechanism.
Push the ends of the new cord between the rollers.
Insert the ropes into specially designated recesses. Do not allow them to intertwine.
Connect both mechanisms. The swivel should be located at one of the edges, and the lifting one should be inside the eaves.
Install the entire mechanism back into the eaves.
Install plugs.

Replacing the horizontal bar. In this case, it is better to purchase a new bar, which should correspond to the size. Dismantle all parts of the mechanism. It is important to remember their location. Replace the necessary part of the blinds, and then put everything back together.

Hide

Blinds are one of the most the best options curtain replacements. The design perfectly copes with the penetration of unnecessarily intrusive sunlight, has many other positive qualities and with proper care can last for many years. But sometimes even such a strong and durable thing breaks. Because of what structural breakdowns most often occur, is it possible to repair the blinds with your own hands and can they be repaired?

The most common causes of vertical blinds failure

Vertical structures are found in houses much less frequently than horizontal ones, but they are also popular, as they have all positive properties blinds. Here are the most common breakdowns.

Break of the connecting chain.
Break of the chain with which the blinds are adjusted.
Breakage of the connection of the lamella with the eaves.
Breakdown of runners.
Deformed control cord.

With all these shortcomings, you can cope on your own, without seeking help from specialists. Below we will tell you exactly how.

Vertical blinds device

Do-it-yourself vertical blinds repair

So, if you are planning to repair the blinds with your own hands, then you need to know how to fix the breakdowns described above.

Now you know how to fix vertical blinds if one of the troubles described above has occurred and deal with the breakdown with your own hands. And what to do if the elements of horizontal blinds have become unusable?

Options for breaking horizontal blinds

Horizontal blinds are the most popular type of construction, but, unfortunately, they sometimes break. And here's what the most look like frequent breakdowns blinds.

Breakage of swivel hooks.
The need to replace the lower clamps.
Replacement of the control cord.
Repair of the blinds lifting mechanism.
Plank replacement.

The reasons why these elements fail are not so important - maybe the service life is expiring, or careless movements damaged the structure. It doesn't matter, it's just important to know how to fix blinds qualitatively and quickly replace the destroyed element.

Horizontal blinds

Do-it-yourself horizontal blinds repair methods

If you are the owner horizontal type structures, then you need to know how you can repair horizontal blinds with your own hands if one of the breakdowns described above is found.

Now the question of how to repair the blinds does not cause you any difficulties and, if necessary, you can repair it yourself.

Roller blinds look very stylish in the interior, even a girl can install them. Read our article on .

How to install horizontal blinds, read the instructions on our website.

Breakage and repair of roller blinds

Slightly apart from this list roller blinds. Do-it-yourself roller blind repair is possible, but if the canvas itself is damaged, then there is nothing left but to change it completely or, more preferably, to buy a new design.

If the curtain fabric does not fit snugly against the window, then it is necessary to check the installation of the guides and the presence of a load in the lower part of the structure. When the curtain is poorly fixed on the frame, it is best to replace the mount, choosing the most suitable one for you. If the control cord is torn, then it is necessary to remove it and replace it with a new one. Do not tie a broken cord!

In general, repairing blinds with your own hands does not cause any particular difficulties, and with minimal skills, you can deal with breakdowns yourself. You can always find a lot of videos on the Internet that demonstrate the main faults and how to fix them.

Everything has its own expiration date, and blinds are no exception. It happens that situations occur that cause a breakdown. Do not rush to immediately part with the damaged item. Assess the damage and possible ways recovery. You need to know what caused the problem. and how to fix it. We will consider a list of frequent breakdowns of horizontal, vertical models and give repair tips.

Important advice! If you are repairing the structure yourself, approach the choice of a new part responsibly. For example, if you need to replace the lamella, it is better to take a picture of an example or take a sample with you to the store and show it to the manager. Thus, you will pick up what matches the model.

Blinds construction repair

Repair of horizontal blinds

It happens that the repair of horizontal blinds becomes necessary. For unknown reasons, the design stopped working. If you yourself determine the malfunction, then it makes no sense to call professionals. Repairing blinds is a simple operation, and you can handle it yourself. Let's look at the frequent breakdowns of horizontal models:

Control cord broken- happens if carelessly pull. If small children live with adults in the house, this happens often. The mechanism of the blinds is an extraordinary mystery for them, because children love to pull the control thread. To improve the operation of the structure, find the place of the gap. If it is visible, try to carefully sew both ends of the rope together. The second option is to replace the cord. Open the cornice, carefully remove the rest. Then insert the new one in the same way as the old one.
Rotary mechanism failure- if the blinds stop opening, or open by turning along the axis, the problem lies in the malfunction of the rotary structure. To replace, you need to dismantle the slats, remove the side fasteners from the eaves. Next, dismantle the structure with pliers. With a slight movement, we open the cornice and take out the old mechanism , instead of which you need to install a new one. Then we assemble the structure again.
Lamella breakage- if it so happened that the lamella was damaged, and it can no longer be restored to its former appearance, it is better to replace it with a new one. it simple process. We squeeze out the plugs of the cord of horizontal models, cut off the end nodes, pull the cord out of the structure, replace the damaged part with a new lamella. Next, we collect the details in reverse order.

Repair of vertical blinds

To begin with, we determine the faulty part. When we make sure that it is broken, we repair vertical blinds. When disassembling the design, remember the location of the parts. We work consistently so as not to make a mistake when we collect the parts back. We will need:

crosshead screwdriver;
pliers;
wire for threading rope.

Cord break - to get rid of such a breakdown, change the cord to a new one. To do this, you will have to dismantle the structure. Open the special box where it is located. Remove the remnants of the old cord from there. Through the special holes, mount a new thread. Assemble the box in the same order as when disassembling.

Dismantling the vertical structure

Abrasion of lamellas - the lower edge of the lamellas is more often abraded. It can be hemmed or trimmed. If the lamellas are worn out, it is advisable to replace them. To do this, you will need to buy the same part. The price for them is democratic, depending on the brand of the manufacturer and materials. To replace the lamella, the following steps are necessary:

squeeze the side latches of the cord from the bottom bar, cut off the end knots and pull out the cord;
get worn out lamellas and replace with new ones;
pass the cord through special holes;
tie knots;
mount the structure back.

To learn in detail how to remove the slats from vertical blinds, watch this video:

Blinds repair by specialists

There are breakdowns that are difficult to deal with on your own. In this case, contact the wizard for help. Please note that there are usually two people per call. For one, sometimes, the task is overwhelming. Repair costs vary. It depends on the region, the nature of the malfunction and the purchase of a new part.

For correct repair professionals advise to replace several pieces at once. In this way, new item less noticeable than the others. Especially if the blinds have served for a long time, there is a possibility that the lamellas have faded under the influence of the sun. Therefore, a few new pieces to match the old ones will only refresh the design.

In any case, before making a decision, assess the nature of the damage. Sometimes it's better to buy new model rather than repair the old one with your own hands.

Hello everyone, I'm with you again. There are people whom you don’t feed with bread - let them pick something and fix it. I'm one of those, by the way, though recent times I try to compare for such cases what is more profitable - tinkering myself or paying a specialist. It's almost always cheaper for me to turn to a specialist. For example, with the repair of blinds. I work for a window company and we are regularly faced with the need to "renovate after repair" - for example. when the entire repair was done, carefully tie the thread, and the client completely dismantled the entire mechanism as in a do-it-yourself kit. In fact, there is no difficulty in repairing blinds - I have collected common causes of breakdowns and how to repair them, read, take note. Since it is better to see once than hear 100 times, I advise you to immediately watch the video, it will be clearer. Good luck with the repair!

How to repair blinds - how to fix them yourself?

It is quite possible to repair blinds with your own hands at home. To do this, you need to have the skills of owning tools and creative ingenuity.

Without these qualities, it is more advisable not to try to fix the problem, but to call an experienced specialist. If you have skillful hands, the remaining components and parts missing for do-it-yourself blinds repair can be easily purchased in specialized stores.

Window blinds device

Window blinds are a stylish and functional accessory for any interior - be it the office of a reputable company or the living room of a private house. As a convenient and modern alternative classic curtains, blinds have one drawback: they tend to break from time to time.

In order not to aggravate the situation, before repairing the blinds, you need to familiarize yourself with their device. All blinds, depending on their design, are divided into two main types: vertical and horizontal. The main difference between these two designs is the vertical or horizontal arrangement of adjustable sash panels.

The main types of breakdowns

Due to the different structure and order, the malfunction device of these two varieties is also different. Therefore, the repair of horizontal blinds will be different from the repair of vertical blinds.

Horizontal design

Horizontal structures are strong enough, and with careful operation, they can serve you for ten years without a single breakdown. But with careless use or as a result of poor assembly, certain parts may fail. Let's take a closer look at how to repair horizontal blinds. The list of major faults includes:

The lamellas (sashes) do not rotate around their axis.
Cord break.
Breakage of the lifting mechanism.
Breakage of the horizontal bar.

Replacing hooks and latches

If you stop turning around its axis horizontal slats, then the point here is broken hooks and lower latches

If the horizontal lamellas have stopped turning around their axis, then the point here is broken hooks and lower latches. To replace broken ones plastic parts you will have to buy new parts in a specialized store.

In this case, you should pay attention to their size - the purchased parts may differ from the native ones. Therefore, when going to the store, take a broken part with you for a sample.

The replacement is as follows:

We remove the old hook or latch.
Hold tight with one hand rotary mechanism, preventing it from rotating, and the other - insert a new hook into the corresponding hole.
We insert a vertical cane into the installed hook.

In the same way, the lower latch is replaced. After this procedure, the lamellas will begin to rotate around their axis, adjusting the flow of light.

Replacing a Broken Cord

If the cord breaks, replace it with a new one. Before buying a new lace, you should take the dimensions of the blinds design. Knowing these dimensions, the sales assistant will be able to choose the length of the cord you need. For work you will need scissors, a needle and tweezers. The procedure for replacing the cord will be as follows:

We remove the remnants of the old torn cord.
We pass a new cord through lifting mechanism so that it passes between the iron cylinder and the plastic roller.
We pass the cord into the bottom hole of the plastic basket at the place where the ladder is attached. At the same time, the lace is also threaded between the ladder.
We pass the second piece of cord, just like the first. We just pass it into the near punching of horizontal lamellas.
Next, take a large needle and insert the cord into it. With the help of a needle, we thread the cord through the holes in the lamellas, bypassing the ladder either to the right or to the left. Thus, the cord wraps around the ladder in the form of a snake.
In the lower part of the blinds, we pass a needle with a cord through the plug, and tie it into a knot. We perform a similar operation with the second cord.

Lifting mechanism repair

Replacing the lifting and turning mechanism is a rather complicated task. If the blinds do not want to work in desired mode, then perhaps the whole problem is in the breakdown of the lifting and turning mechanism.

Before undertaking this work, you need to soberly assess your capabilities: can you fix horizontal blinds with your own hands? The fact is that replacing the lifting-swivel mechanism is a rather complicated task. First of all, you need to remember the location of all the details of the structure, after which we proceed directly to replacing the damaged mechanism.

First of all, remove the plugs from the sidewalls of the eaves.
We unclench the edges of the eaves and with the help of pliers we pull out the shaft on which the rotation mechanism is fixed.
We separate the shaft and the rotation mechanism.
We take out the cord from the lifting and turning mechanism, untying its lower ends.
We insert the ends of the lace into the new mechanism, passing them between the roller and the cylinder.
We fix the new rotary mechanism on the shaft and assemble the structure in the reverse order.

Replacement of damaged lamellas

Replace bent blades with new ones.

Very often, under mechanical stress, they suffer horizontal slats- lamellas. At the same time, it can be almost impossible to repair damaged planks - it is completely impractical to straighten them. It is easier to replace bent lamellas with new ones. This process is carried out as follows:

We squeeze out the plugs from the bottom of the bar, untie and remove the cord.
We remove bent or broken strips, replacing them with new ones.
We thread the cord into the corresponding holes of the new lamellas, the bottom bar and the plug.
The ends of the cord are tied in a knot, and the plug is inserted back into the bottom bar.

As you can see, it is not so difficult to repair horizontal blinds - you just need to show enough diligence and ingenuity. How to repair horizontal blinds yourself, see this video:

Vertical structures

Repairing vertical blinds is somewhat different from fixing horizontal structures. The most common failures of this system:

breakage of the connecting chain;
breakage of the chain of command;
shoulder replacement;
cord break.

To repair vertical blinds that have a broken chain connecting the slats, remove the old chain. Then a whole chain is mounted in its place, to which the vertical petals of the lamellas are attached.

Chain of command

Remove the side cover and dismantle plastic gear, on which the chain is wound Replacing the control chain will require a fairly large investment of time and effort. First of all, you need to remove the side cover and dismantle the plastic gear on which the chain is wound.

After removing a piece of the old chain from the gear, we put a new one on it. We put the gear in its original place and close the side cover.

Replacing the plastic hanger

Frequent problem vertical structures is the breakdown of plastic parts. The most vulnerable parts include the shoulder of the lamella. A hanger is a plastic plate with which a vertical petal is attached to the eaves.

It is not difficult to replace it - the shoulder is attached to the fabric lamella using an ordinary fishing line or thread. The shoulder is attached to the plastic slats with a cool compound. But there is a nuance here - the width of the lamella, and hence the shoulder, for different blinds can be of different sizes.

Control cord

The control cord breaks quite rarely. But even if this misfortune has befallen you, it is not so difficult to fix it. You need to purchase a new cord of the required length from the store.

You can find out by taking small measurements. Take the width of the blinds and multiply it by two. To the resulting product, we add the height of the structure, multiplied by 1.5. As a result, we get the length of the cord we need.

To install a new lace, we pass its two ends through the side cover of the eaves. Then we pass the lace through the runners to which the lamellas are attached. Further, one end of the cord is attached to the latch, and the other is threaded through a special roller located at the end opposite from the control mechanism.

This is just a small part of the many possible malfunctions and breakdowns of blinds. But, using simple tools and ingenuity, it is quite possible to fix any malfunction at home. At the same time, do-it-yourself repairs can be in no way inferior to repairs made in a professional workshop.

Source: http://balkon.expert/shtory-i-zhalyuzi/zhalyuzi/remont-zhalyuzi-svoimi-rukami.html

How to repair blinds with your own hands?

Today, almost all windows are equipped with additional structures such as blinds. This is a truly unique and at the same time universal variety of curtains.

Unlike models made from ordinary material, blinds tend to break, so each consumer must learn how to independently repair them. These designs can be both vertical and horizontal. Of particular difficulty are horizontal blinds.

Due to the design features, most of the difficulties arise with the repair of horizontal blinds.

Do-it-yourself blinds reconstruction

In case of any damage, you can contact service center where specialists will repair horizontal blinds in a matter of seconds, but it will be quite expensive. It is best to repair the device yourself, especially since experts assure that everyone can do this.

First of all, be patient. The most common causes of breakdowns occur against the background of contamination of the mechanism or due to the fact that some elements fail.

Horizontal blinds are made from the following parts:

control chain;
holder that holds this chain;
lining tiles;
main box;
fishing line fasteners;
plug;
plate;
side covers for the box;
blinds.

In order to repair the blinds, you need to prepare pliers and screwdrivers different diameter, as well as wire and scissors.

Identification of the causes of failure

If the rotary mechanism is broken, it means that the fabric of the structure rotates around its axis or cannot open (close). To fix this breakdown, remove the lamellas and plugs (side) located in the upper part of the structure. After that, the axle is dismantled with pliers.

The side plugs must be unclenched, and the mechanism itself must be removed. Then a new one is installed, and the structure is assembled in the same order in which it was disassembled.

If the lamellas are broken, they will certainly be replaced. To do this, squeeze out the plugs of the cord and cut off the end nodes, then pull out the lacing. If the ladders break, then you need to remove the canvas and plugs, after which the faulty parts are pulled out of the caliper.

The fact is that the caliper is located on the main axis of the mechanism, so it is removed from the eaves and the cord is removed. In this case, the canvas should be located in the hands. This is the only way to get the ladder out.

To assemble the blinds with your own hands, you need to install the clamps after installing the new element. The lamellae are threaded into the cells with a wire. When the blinds are assembled with your own hands, you need to place the jumpers on the right and left sides of the lacing, and fix the ladder with plugs.

In the event that the canvas is difficult to open, then the rotary device is checked. By the way, all experts strongly advise periodically cleaning the mechanism so that such situations do not arise.

Of course, as in previous cases, it is necessary to replace the axle with a new one. In the event of a breakdown of horizontal blinds, you need to buy new elements. Today on construction market The choice of all these details is huge. They can be bought at different price. Most importantly, you can now make repairs yourself.

Source: http://moyagostinaya.ru/okna/remont-zhalyuzi-svoimi-rukami.html

Do-it-yourself horizontal and vertical blinds repair

Do-it-yourself blinds repair involves the replacement of failed elements. To do this, you need a tape measure, screwdrivers, a screwdriver.

Vertical structures

If the cord is torn in vertical blinds (in a visible area), then a new thread is tied. The mechanism of operation of such curtains is located in a special box, which can be easily opened to inspect damage. Repair of vertical blinds when a gap is formed inside the device involves dismantling and disassembling the structure.

Blind mounting options.

In this case, the replacement of the cord is carried out in several stages:

opening the box;
dismantling the remnants of the cord;
installation of a new thread (through certain holes);
box assembly.

First you need to measure the length of the old cord of vertical blinds. Replacing the chain or slider provides for complete wear of the bands. Planks are stitched or cut.

The bulkhead of the cornice or the replacement of components is entrusted to specialists. Professionals do not recommend the owners of houses and apartments to trim the blinds with their own hands. To shorten the product yourself, you need to measure the length of the curtains. The excess is cut off.

Repair of horizontal blinds is carried out in case of failure individual elements curtains or when the mechanism is dirty. If a defective part is identified, then you will need to buy a new analogue.

Repair of the structure is carried out using a screwdriver, pliers, scissors and wire.

Experts identify several faults of horizontal and vertical blinds. If the 1st leaf does not open / close or rotates around its axis, then the cause of the malfunction is related to the rotary mechanism.

To replace it, you will need to remove the lamellas and side plugs from the upper eaves. Then the axis is dismantled from the device using pliers.

The sides of the cornice are unclenched, the mechanism is removed. A new unit is installed, the structure is assembled. If the lamella breaks, it will need to be replaced with a new element.

To do this, squeeze out the plugs of the cord of horizontal blinds. End nodes are cut off. The cord is pulled out. Damaged elements are replaced with new counterparts. The canvas is assembled in reverse order.

Torn ladders are replaced after the canvas is dismantled. To do this, you need to remove the plugs and pull the upper ends of the ladder out of the caliper. The last element is located on the axis of the main mechanism. The product is disconnected from the eaves, the cord is removed. The canvas is held in the hands, the ladder is pulled out.

Appropriate clamps are installed on the last new element. The lamellas are threaded into the cells with a wire. The web is assembled in such a way that the jumpers are located to the right and left of the cord. The ladder is fixed with plugs.

If the horizontal canvas opens tightly, then check the rotary mechanism. Experts recommend cleaning the device periodically. To do this, you can use a vacuum cleaner and oil. Difficult movement is associated with damage or bending of the corresponding axis.

If it jams or does not work evenly, then it is replaced with a new product. In this case, the mechanism is disassembled. An axle that jumps off the guides is inspected. Damaged and bent elements are restored.

To connect the new cord to the old one, you will need to cut the loop of the lifting mechanism. The ends are pulled out. The length of the new element is calculated by multiplying the height of the blinds by 4. The ends of the new component are attached to the cut analogues of the old thread with a tape.

For nylon fabrics, the soldering method is used. The ends are melted with matches or a lighter. Then the elements are connected together so that the new cord can pass through the holes in the slats. If the connection is broken during the drawing of the element in question, then it will be necessary to remove the upper crossbar by threading the thread through special blocks.

If the product is pulled through, then the blinds are lowered down to their entire length. Then the lock of the main mechanism is wedged (to release the cord). A cap is removed from the 1st end of the lower bar. The corresponding crossbar is dismantled. The old and new products are pulled up through the last elements.

To strengthen the part in question, you will need to cut the connections by making a knot at the corresponding ends. Throw away the old cord. The wedge (from the lifting thread) is dismantled. Blinds should hang evenly. The looped end is passed through an equalizer. Removed elements are installed in place.

Today plastic windows so popular that it is no longer necessary to tell what they are and what their benefits are. One of the additional structures installed on plastic windows are blinds - horizontal, vertical and roller blinds, which are an alternative to ordinary curtains.

When choosing a color, keep in mind that your blinds will look lighter on the window than the sample on the "fan" with samples.

Installing blinds with your own hands and repairing them is not at all difficult for those who know how to hold a tool in their hands.

There is on the market big choice components, in almost every city there are firms specializing in the sale of blinds and accessories for them.

Before installing horizontal blinds on plastic windows, we will prepare essential tool. We will need:

On the diagram of horizontal blinds, it is indicated: 1 - control chain, 2 - control chain holder, 3 - lining tile, 4 - box, 5 - fishing line fastener, 6 - plug, 7 - mounting plate, 8 - box side covers, 9 - blinds.

drill with a drill with a diameter smaller than that of self-tapping screws;
screwdriver;
pliers;
pencil.

The delivery set usually includes self-tapping screws, metal L-shaped mounting brackets in the form of corners with holes and latches, and plastic corners-clamps for fixing the bottom bar. If the above accessories are not available, they can be purchased separately. Now you can start the installation by following a few simple steps.

The installation location is determined by applying to the upper sash of the window.
Attachment points are marked. To do this, brackets are applied to the installation site and marks for the holes are made with a pencil.
We drill holes for self-tapping screws. You can not drill holes, but make them using the same self-tapping screws, but PVC material, from which plastic windows are made, is quite dense and viscous.
Brackets are screwed to the upper sash of the window.
The side plugs are removed from the upper eaves and the blinds are installed on the brackets, falling into the latches. Put the side covers in place.
If your window is opened for ventilation, then it is necessary to install latches on the lower sash of the window so that the blinds do not sag when tilted. To determine the exact location of their installation, lower the blinds completely, attach the clamps to the plane of the lower sash, make marks for the holes. After that, drill holes and fix the clamps on the screws.

Exist different types, so their designs and fastenings may be different, but the principle of installation remains the same for different designs. The installation of vertical blinds differs from the installation of horizontal ones primarily in that the brackets are not attached to the window sashes, but to the wall above the window, and this process is similar to the installation of ordinary curtain rods.

Repair

Horizontal blinds, like vertical ones, are easy to maintain and repair. The design is quite reliable, and can serve for years without problems. But there are times when, for example, with careless handling, individual parts may fail. Active children and pets can help too. Another reason may be the contamination of the mechanism, which leads to difficulty in the movement of the lamellas, an increase in effort during operation and, finally, a breakdown. This is in need of repair.

Today the market is saturated with accessories for vertical and horizontal blinds, so you can do the repair yourself. It is only necessary to determine the faulty part, find it and replace it. When disassembling the structure, it is necessary to remember the location of the parts and the sequence of disassembly, so as not to be mistaken when assembling in the reverse order. In this case, you can use photographing the disassembly process. Before starting repairs, prepare the following tools:

screwdriver;
pliers;
scissors;
a wire bent in half so that an eye is formed, as in a needle - for threading a cord.

Main malfunctions

If the canvas of the lamellas has ceased to open, close, turn around its axis, then the cause of the malfunction is in the rotary mechanism. To replace it, do the following:

blinds are removed, side plugs are removed from the upper eaves;
the axis is pulled out of the rotary mechanism with the help of pliers;
the mechanism is removed, for this you need to unclench the sides of the eaves;
a new rotary mechanism is taken and the structure is assembled in the reverse order.

On the diagram of horizontal roller blinds shown: 1 - side decorative covers, 2 - side bracket, 3 - guides, 4 - blade, 5 - self-tapping screw, 6 - clamps, 7 - frame, 8 - guide rail, 9 - bottom bar, 10 - upper chain limiter, 11 - box.

If the lamellas are damaged and need to be replaced, then, having removed the blinds, we do the following:

cord plugs are squeezed out of the bottom bar, end knots are cut off and the cord is pulled out;
damaged lamellas are removed and replaced with new ones;
the cord is threaded into the holes of the lamellas, the bottom bar and the plug;
knots are tied, plugs are inserted into the bottom bar.

To replace a torn ladder, the blinds are also removed by removing the side plugs of the upper eaves, and the following points are performed:

take out the upper ends of the ladder from the caliper located on the axis of the mechanism;
the canvas is disconnected from the eaves, the cord is removed;
holding the lamellas in hand so that the whole canvas does not crumble, we pull out the ladder to the side;
clamps are installed on the new ladder in the same way as those installed on the old one;
lamellas are threaded into the cells of the ladder;
with the help of a wire, a cord is threaded into the holes of the lamellas, so that the jumpers of the ladder alternate either to the right or to the left of the cord;
the ladder and the cord are fixed with the help of a plug in the bottom bar.

If the blinds began to open tightly, then first of all it is necessary to check whether the rotary mechanism is clogged. It is recommended to periodically clean it with a vacuum cleaner and lubricate it with oil, for example, from sewing machine. The reason for the difficulty of movement may be damage or bending of the rotary axis (rod). If the axle jams or runs unevenly, then noticeably asynchronous rotation all lamellas. In this case, an axle replacement is required, which is carried out by disassembling the mechanism and mounting it on a new axle. Sometimes it happens that the axle just jumps off its rails, and if you make sure that the axle is not damaged or bent, then you just need to restore its position in the rails.

There may be malfunctions that you will find difficult to deal with. In this case, you will have to turn to specialists, but before using their services, it is worth evaluating whether repairs will not be more expensive than buying new blinds.