In this article, GD-Home has collected 14 swing photo ideas for summer cottages: from simple to complex, which will not only please, but also decorate the garden. Making a hammock or a swing with your own hands is not so easy without knowledge about the features of structures and fixtures. In order to make your search easier for you, we decided to combine all the necessary information into one BIG REVIEW ARTICLE. Here you will find information about the materials from which they can be made, types of structures and fasteners, as well as drawings with dimensions.
Do not forget to compare the weight of the child / adult with the reliability of the fasteners.
DIY garden swing: what, how and why
Garden swings are usually made from:
- tree
- metal
Wooden structures look more aesthetically pleasing, but have weight restrictions. Mounts should be bought ready-made, plastic products are suitable for children's models, but for adults it is worth getting metal mounts. Decorative forging can be used as a decoration for metal structures.
Idea: To create a swing, materials remaining after repair, such as pallets, boards, etc., are perfect.
Attachment to the support can be done using:
- thick rope
- metal chains with large links
A swing for a summer residence can be:
- portable
- stationary
By the name it is already clear that a portable swing for giving can be placed in a convenient place: on the terrace, in the garden, near the gazebo. They are easy to hide from the rain.
Stationary models have a massive structure and are installed in a specific place. These can be benches without legs with or without a back, models suspended from the ceiling of a terrace or a tree. As a rule, such structures can easily withstand two or three people, unlike portable ones designed for one person.
In order to make a garden swing with your own hands are often used pallets. They need to be sanded with sandpaper, then painted. Sitting on a wooden pallet is quite uncomfortable, so you should take care of soft pillows or a mattress. Products can be decorated with additional decor, in the form of balls, flags, colored ribbons.
Show us a man who would refuse hammock in the country! It can be hung from trees, metal poles or a crossbar. The maximum load is 200 kg.
Do-it-yourself garden swing made of wood: drawings + dimensions
This is the most common design of stationary products. Metal elements will help to stiffen.
1. It is worth installing supports in pre-prepared trenches.
2. After installation, the pits should be concreted. The mortar should consist of sand, cement and gravel in a ratio of 2:1:1, respectively. The amount of water should be calculated depending on the weight of the cement, approximately 40% of its mass.
A phased plan for creating a children's swing
1. The upper bundle is created from the board (115 × 10 × 5)
2. A visor (145 × 23 × 5) is formed to protect metal parts from rain.
3. Prepare two racks (275x23x5). They should be buried at least 60 cm, and then concreted. There should be 105 cm between the posts.
4. A stainless steel chain is attached.
5. Seat is made (60×15×5)
To make such a swing on four supports, you will need screws (1), rivets (5), wooden boards (2), corners for the frame (3), different types of bolts (14, 20), a bolt for fixing the liner (15), the liner itself with internal thread (16), large spacer (17), plain washer (19), deadbolt - 2 pcs (21).
The main (4) and side bars (7) will serve as a support for the entire structure. Metal elements, such as a connecting bar (6) or a kerchief-strut (12), will help to stiffen the product. The awning is fastened with the help of connecting elements (8) to the support frame (18). The seat can be hung on thick ropes (9) using carabiners (10) and a ring (11). Attached to the top bar (13)
To create a bench, you will need boards of the following sizes (cm):
One piece each: No. 11 - 1230 × 90 × 35, No. 12 - 1170 × 90 × 20
Two pieces each: No. 1 - 375 × 90 × 35, No. 2 - 375 × 70 × 35, No. 3 - 375 × 90 × 35, No. 4 - 275 × 45 × 35, No. 5 - 650 × 90 × 35, No. 7 - 585x145x20, No. 8 - 300x45x35, No. 9 - 300x45x35, No. 10 - 1300x90x35
Three pieces each: No. 13 - 1230 × 90 × 20
Four pieces each: No. 6 - 530 × 45 × 35
Twelve pieces each: No. 14 - 850 × 90 × 20
Do-it-yourself swing scheme
Scheme of a children's swing
Number 1 indicates the horizontal element of the side part. You need 4 such elements, 70 cm long with the same width and 5 cm height. The product uses three connecting rods with a diameter of 2.5 cm and a length of 80 cm (2), as well as 4 reinforcing squares measuring 2.5x10x10 (3). The four vertical side pieces (4,11) are 37.5 cm long and the same width and thickness, which are equal to 5 cm. To create the backrest, you will need two side pieces (5) of the same size. The seat and back are made of rods with a diameter of 2.5 cm and a length of 58 cm. 13 rods are needed for such a swing. The side elements of the seat have a size of 67.5x5x5 (7). The model is hung on special pendants (8) with a diameter of 2.5 cm and a length of 10 cm. You will also need a pin (9), with a diameter of 1 cm and a length of 7 cm, and a seat lock (10), with a diameter of 2.5 cm and a length of 68 cm .
Such a swing can be hung from a tree or made into an A-shaped structure that can withstand higher loads. The stand can be made of wood or metal.
Important! Accurate calculations of the angle of connection of the racks will allow you to design reliable fasteners. For fixing, you can use corners and screws.
Swing for a summer residence: types of fasteners
In order to create a good garden swing made of wood with your own hands, you should use carabiners or anchors.
1. Carabiners can have a round or rectangular section, so they are perfect for both cylindrical and square timber.
2. Anchors are the same carabiners only with a through type of fastening.
Models with four legs can have three types of mounting:
- 4 carabiners are attached to the ropes and chains, after which - to the support bars.
- 2 carabiners combine two ropes or chains and are attached at two points on the crossbar
- all ropes are attached to the 1st ring (carbine), which is then hung on a support
Obviously, the first type of fastening provides a uniform load on the entire structure.
We wish you success!
In the section you will find 100 ideas for landscape design, as well as creating furniture and decor with your own hands.
Do-it-yourself wooden swing: this is exactly what will be discussed in this article, on the site "". A shady garden in a backyard and summer cottage will be a great place for a family vacation, especially if you make a little effort and make it comfortable with the help of various accessories and small structures, for example, etc. Make do it yourself and place on site wooden swing: photos and drawings, dimensions and the main parameters for construction you can find in this article.
Swing- this is a great way to diversify your leisure time while relaxing in the country
Features of creating a wooden swing for a summer residence: characteristics and types of structures
For creating garden swing three main materials are most commonly used. This list includes wood, plastic and metal. Undoubtedly, each of these materials has its own advantages and disadvantages. But when it comes to do-it-yourself garden swing drawings, you will not find a more practical and convenient raw material than wood.
At wooden swing there is only one drawback, which concerns the operation of any products made of wood. Such structures without the application of appropriate protective measures can be severely affected by the influence of negative environmental factors.
Original swing round shape with soft mattress
These factors include the impact of:
- rain;
- snow;
- direct sunlight;
- fungi and mold;
- insects;
- sudden temperature changes;
- decay processes.
DIY you can make different swing and turn your ideas into reality
The benefits of creating a wooden swing with your own hands
Wood has excellent technical and operational characteristics. Thanks to the properties of this material, you can create a truly comfortable and beautiful design.
Photo: wicker swings in the form of spheres are quite roomy and comfortable
Features of hand-made from wood:
- environmental friendliness. Since wood belongs to materials of natural origin, products made from it are completely safe for human health;
- external aesthetics. Designs are able to fit into anyone, since the main part of the environment is made up of natural materials (stone, wood) and vegetation. Compared to metal products, wooden structures are much more aesthetically pleasing and can support the exterior of any country house;
Pillows and blankets will do swing softer and more comfortable
- safety. Due to its softness, wood is easy to use and operate, it can reduce the number of injuries. This advantage is most beneficial if you intend to design a children's swing;
- simple mounting system. Any person who has the simplest skills in construction and handling wood can be engaged in the construction of a swing;
Canopy over the swing protect from the scorching rays of the sun in the summer
- versatility. This type of material lends itself quite easily to various types of processing (grinding, cutting, cutting). Thanks to this, any of the wooden gardens, the photo of which you most like, can be done by you with your own hands without involving specialists in this process. Wood allows you to make single-seat structures or swings with a large capacity, made in the form of sofas.
Adults also do not mind relaxing and relaxing, imposingly swaying on a swing
Note! The cost of purchasing the material is not high. In addition to this, by creating products yourself, you save on the services of craftsmen.
Do-it-yourself garden swing made of wood: photos and drawings, dimensions and modifications
If you have made the decision to creating a swing on your own summer cottage, first of all, you should decide on the type of structure you want to install, and determine a suitable place for its placement. To facilitate and speed up the design and preparation phase, use do-it-yourself photo of a swing for a summer residence made of wood, drawings of which there are many on the Internet.
Drawing of a wooden swing optimal size for one person
Varieties of wooden swings
Classification of garden swing quite extensive. In this case, the main types of structures are presented:
- family - have a high capacity. The design is based on a long bench, which plays the role of a large seat that can simultaneously accommodate up to 5 people. In most cases, this type of swing is equipped with its own canopy that protects from sunlight and bad weather;
On the swing family type can comfortably accommodate 3-5 people
- children's - designs can have a significant number of modifications. Most often, the main components of such a product are supports, a small seat and fasteners. It is important at the same time to ensure a full level of safety for the child. For these purposes, protective elements must be provided in the design that will prevent the baby from falling. These elements include a comfortable backrest, handrails on the sides, a partition located in front, seat belts that fix the child inside the seat;
Original made of wood in the shape of a horse
- portable - products with compact dimensions and light weight. These characteristics allow not only to move the swing around the site, but also to put it in a car for transportation to another place for the rest. As a rule, the fastening of such products is carried out on a tree branch or on a pre-made support.
Portable swing can be moved to any place on the site, depending on weather conditions
Choosing a place to place a children's swing
Any type of construction that is carried out on the territory of a suburban land plot begins with the design stage and the selection of an appropriate location.
Note! The principle according to which the choice of a place for construction is carried out applies not only to children's swings made of wood. These requirements apply to other designs as well.
Simple children's swing made using wooden board and rope
As far as possible, a plot with a flat surface should be selected on the backyard territory. It is desirable that this area be sheltered from the sun and precipitation. Ideal place for swing building- an area under a tree where a thick shadow falls. It is allowed to perform installation on a porch protected by a canopy.
All these conditions directly affect the level of operating comfort, since sitting on a swing seat that is hot under the sun is unpleasant and inconvenient. And unhindered exposure to rain can damage the structure.
Placing in the garden children's swing, it is necessary to provide enough space for rocking
It is also worth taking into account the fact that as the sun moves across the sky, the shadow cast by a tree or other objects will move. For installation, you should select a place where the shadow will stand at noon. During this period of the day, the sun has the strongest and most aggressive influence.
Drawings and photos of wooden swings for summer cottages
If we talk about universal structures, then a suspension-type swing mounted on A-shaped supports will become a real object of relaxation for the whole family. Moreover, they can be installed both in large summer cottages and in small gardens near the house. And the process itself is not expensive in terms of resources of time and effort.
Swing chair design with soft cushion cover
The list of required tools for work should include:
- tape measure and pencil (tape measure can be replaced with a measuring tape);
- jigsaw mechanical type or electric;
- circular saw;
- hacksaw;
- square for measuring angles (combined type);
- truss pins;
DIY swing bed
- test square;
- saw goats;
- thickness gauge and planer;
- hammer, screwdriver, clamps, wrenches;
- chisel (25 mm);
- electric drill with a set of drills (10, 8 and 4.5 mm);
- grinding block.
Simple wooden swing for children's outdoor play
Note! Of course, buying a finished design in a store is much easier and faster. But in this case, it is unlikely that it will fully meet all your requirements in terms of design, size, etc. Creating a do-it-yourself garden swing made of wood according to your own drawings will allow you to endow the structure with all the necessary characteristics.
Swing in a quiet corner of the garden allow you to enjoy the aromas of greenery
Building a wooden swing for a garden with your own hands: drawings and selection of materials
At the initial stage, materials are being prepared to create a garden swing with your own hands, the photo of which you liked the most. Based on the drawings, you can easily understand how many blanks will be required to assemble the structure and what dimensions they should have.
Dimensional table for creating blanks:
| Detail in construction | Dimensions of the transverse part of the workpiece, cm | Final length, cm | Required number of blanks, pcs. |
| Frame part of the structure | |||
| Strut (upper) | 4.5x14 | 23 | 2 |
| Strut (lower) | 4.5x14 | 96 | 2 |
| Leg | 4.5x9 | 198,7 | 4 |
| Rigel | 4.5x14 | 210 | 1 |
| Seat parts | |||
| rear pillar | 3.5x7 | 60 | 2 |
| Bar (reference) | 3.5x7 | 95,5 | 2 |
| Bar (for seat) | 3.5x7 | 120 | 2 |
| Armrest | 3.5x7 | 60 | 2 |
| Back plank | 2.5x7 | 130 | 2 |
| armrest support | 3.5x7 | 27,5 | 2 |
| seat bar | 2.5x7 | 128,4 | 8 |
| Top bar | 2.5x9 | 130 | 1 |
In addition, in order to interconnect the above blanks into a single structure, it will be necessary to have fasteners with different parameters.
Additional materials for creating a family or children's suspended wooden swing
The final size of the structure is: 2.1 m (width), 1.235 m (depth) and 1.9 m (height). It is recommended to use impregnated pine as a raw material.
Dimensional table of fasteners:
Useful advice! Prepare in advance an antiseptic suitable for wood processing, as well as materials for finishing. These points are thought out at the design and planning stage of the future structure.
In addition to fasteners, you will need a number of additional materials: a pair of wooden spacers for the corner zone (length 38 cm), sandpaper with a grit level of 120, hooks equipped with a fuse (6 pcs., 5 mm), chain 4.4 m long (link thickness 2 cm).
Do-it-yourself swing with a soft mattress and cozy pillows - a great place to relax
Drawings of a garden swing: how to make a family structure with your own hands
For swing placement it is recommended to choose the back of the house. Even if your site is fenced off from a noisy street and neighbors, this area will still be the most comfortable and quiet. The backyard in most cases is equipped for relaxation, and you can safely use it for mounting family or children's street wooden swing for giving.
Wooden swing-bench, step 1: design sketch and preparation of parts for assembly
Marking the supporting part of the product
For the manufacture of the support, you will need to cut the cross beam to the specified size using a circular saw. At a distance of 15 cm from each end, marks are made and a straight line is drawn. It should go along all the faces on the beam. This line will be considered as the outer face for the A-shaped support.
Markings for oblique cuts should be applied to the end of the legs. To do this, the square is fastened with rafter pins. One of the pins is mounted on a larger leg (at a distance of 316 mm from the corner), and the other on a smaller one (at a distance of 97 mm from the corner). The leg is laid on the edge and marked with the positions of the square. You should have a bevel for the bottom cut.
Wooden swing bench, step 2: applying glue and fastening the parts together
After that, the positions of the square ruler on the edges of the legs are marked. To do this, you need to move the square in the direction along the leg to align it with the previous position of the ruler. Having outlined the length of the ruler, you can move the square further.
Note! This procedure is carried out until the square is set in length 6 times.
Wooden swing-bench, step 3: fixing the connected parts with self-tapping screws
The last marking line is designed for cross-cutting the beam. These positions are marked with straight lines leading to each of the leg faces. To make a pattern, you need to saw off the material on the side that is not processed.
Cutting the supporting part of the structure
To saw off the material with a hacksaw, you must first put it on the edge and clamp it in the sawhorses. The cutting is carried out strictly according to the markup. Don't forget to control the sides. This is especially true for the upper cut zone. Sometimes it becomes necessary to level the bevel. To do this, it is enough to process the end part of the cut with a planer.
Wooden swing-bench, step 4: mounting the backrest and seat structure
To form the second leg, you need to put the first one to it, joint to joint. After that, all marks along the bevels and length are transferred to the second leg and sawn off according to the markup.
Then both legs are laid on the edge in such a way that the end parts of the vertices are located on different sides of the transverse beam. The lower part of the legs is moved to the sides until a distance of 1.2 m is formed. The upper part of these parts must necessarily be adjacent to the crossbar. To check the bevels, use a ruler, applying it to the ends. Make adjustments if necessary.
Wooden swing-bench, step 5: attaching the armrests
A distance of 50 cm is measured from the base of the legs and the lower bar is applied. Next, the lines of the legs are transferred, as well as the upper and lower parts of the bar to the corresponding parts. After that, the upper bar is laid on the legs. This must be done so that it is located 15 cm lower than the cross beam runs, and is parallel to the first bar. The markup is carried out in exactly the same way as in the previous version.
After that, the bars are removed, and the markings are combined on the surface. At given points, these elements must be sawn to the required length.
Wooden swing-bench, step 6: hanging the structure
Drawings of a garden swing: assembly of the supporting part
Next stage do-it-yourself swing construction- Check fit. The marking is transferred using a square to the inside of the legs.
Useful advice! You can use these 4 parts as templates for making the second side frame. It is assembled in the same way.
The template is set at a mark of 22 mm and markings are made between perpendicular lines on the inside of each of the legs.
Wooden swing bench, step 7: treatment of the product with protective compounds
- a nail with a convex head (25x65 mm) is driven in from the outside of the leg;
- fitting joints and driving nails into the frame;
- the formation of a hole with a drill, the diameter of which is 8 mm. The hole should reach the central part of the end of each bar;
- the formation of the mounting hole with a drill, the diameter of which is 4.5 mm. This should be done as deep as possible into the end part of the bars;
Drawing of the supporting part for a wooden garden swing
- tightening parts through the mounting hole using square head screws, complete with washers 8x100 mm. You need to do this procedure with all the bars;
- placing the cross beam in the appropriate place on the top of the frame;
- alignment of the frame edges with perpendicular markings on the transverse beam;
- formation of a hole with a diameter of 10 mm in the beam and in both legs;
- fixing parts with a bolt with a semicircular head (125x10 mm) and a nut;
- checking the angles between the beam and the leg;
A-shaped design - the most reliable in quality swing supports
formation of through holes in the leg with a diameter of 4.5 mm at a level of 30 mm from the bottom of the beam. Fixing parts with screws (65 mm). Similar actions are performed in the upper part of the leg. Only in this case, other screws (38 mm) are used for fastening.
Next, you need to connect the upper bar and the crossbar. The spacer is fixed with a through screw, the size of which is 65 mm. The upper part of this element is fixed to the lower edge of the beam in the end part with a 38 mm screw in a pre-made hole (4.5 mm).
Swing, installed on the terrace - a great place to spend time with family and friends
Making a wooden swing seat
The technology for creating a seat is carried out in stages based on an L-shaped frame made of boards (40-50 mm).
Note! Do-it-yourself drawings of a children's swing made of wood in many ways similar to conventional family-type structures. Only in this case, you can shorten the seat, making the swing single, or add a few safety belts to secure each child in a large seat.
Pallet swing, step 1: cutting pallets to the desired size
Step-by-step instructions for making a seat:
- from the boards, 3 frame parts for the bench should be formed. They should be L-shaped. Fixation is carried out with self-tapping screws. To fit the frame part to the curve of the spine, use carpentry tools. Thanks to this, you can achieve a comfortable posture for your back while riding;
- frame elements should be placed along the length of the bench with the same step. Use a thin board to hold them together. The resulting design will become the basis for creating a bench. The part with the vertical type of placement will be the back, the horizontal one will be the seat;
Pallet swing, step 2: treatment of the wooden seat with a moisture-proof composition and varnishing
- the remaining seating area is filled with boards. Pre-drill holes in them to facilitate the process of screwing in screws and prevent cracks. Make sure that the boards are spaced at the same distance and have the same length;
- abrade the surface with a grinding tool. Thanks to this, you can eliminate bumps and burrs on the wood;
- fasten the armrests.
Pallet swing, step 3: securing the swing with a cable or strong rope
Photo of a wooden swing for the garden and the process of hanging
In order to hang the seat in its side part (approximately in the middle), you should install screws equipped with rings. Two more rings are fixed at the bottom of the crossbar. These elements will be used to connect the support and the swing using hangers. In this case, chains are used.
The connecting elements between the main parts will be carabiners. The length of the hangers is set as desired. The optimal height for placing the bench is 30 cm above the ground.
Drawing of a double swing suspended on metal chains
Useful advice! Chains can be replaced with a rope or a strong rope. The feasibility of this substitution lies in the fact that the rope or rope creates much less noise than chains. But it is worth remembering that their service life is also reduced compared to metal elements. The rope stretches over time under the influence of weight loads, so periodically you will have to correct the height of the swing.
Swing hanging from a tree with a rope
The final stage of building construction
The next stage of construction will be final. In order to protect the finished structure, swing needs to be treated with varnish. It will provide a smooth surface, preserve the natural beauty of wood and extend the operational life of the product.
Depending on personal wishes, swing you can paint in any of your favorite colors or install a small canopy. Show a little imagination at this stage, and you will be able to create a unique product.
Finished designs can be decorated with pillows, blankets and other decorative elements.
For more comfort, you can put pillows on the bench or a small mattress to reduce the hardness of the landing. Its size should correspond to the size of the seat. Anyone who is familiar with the technology of making upholstery for furniture can be advised to apply these skills when creating a swing. Soften not only the seat, but also the back, as well as the armrests, if they are present in your design. Do not forget that soft upholstery is possible only if the product is located under a roof or canopy.
Wooden and metal parts of the swing must be periodically treated with protective compounds
Photo of a children's swing made of wood and how to create them
Children's design options are much easier to perform, since the requirements for weight loads for them are much lower. On the other hand, safety standards in this case must be strictly followed, since children are extremely mobile and can swing in various ways.
Baby swing from a skateboard, made by hand
Creating a kindergarten swing with your own hands: video and various manufacturing methods
The most popular designs for the garden are hanging type swing. There are several simple methods for creating products for children.
According to the first technology, a wooden seat is used in the form of a wide and thick board. Holes are made in it (a pair on each side) where the rope is threaded. This is done in such a way that the suspension is stretched into one hole, and out of another, located nearby.
Children's swing from a skateboard, step 1: prepare materials and tools
Useful advice! In order to strengthen the structure, in order to prevent breakage of the board in the area where the holes are located, an additional board with through recesses can be installed under the seat on each side. These holes should be located exactly under those made in the seat. The rope will pass through all paired holes.
Children's swing from a skateboard, step 2: remove the rollers from the board and drill holes in it
The second technology involves the creation of a swing based on a frame-frame made of wood. This element is tied to a crossbar or a tree branch with ropes, and the free space is filled with small but strong boards.
Children's swing from a skateboard, step 3: preparation of wooden blocks of round section for armrests
As a seat for the structure created by the third method, half of the rounded log is used. It should be cut along. This version of the seat is considered very durable, but requires careful processing. The surface of the log must be well sanded and polished to get rid of knots and burrs.
Baby swing from a skateboard, step 4: pulling the rope through the holes of the board and armrest bars
The fourth option for creating a structure involves the use of a board as a seat and through metal fasteners. The range of modern stores offers fixing fasteners of various shapes, so you will have a fairly large selection.
Children's swing from a skateboard, step 5: fastening the created structure to the tree using carabiners
In terms of design children's swing do not impose serious restrictions. To create them, you can use any improvised materials. For example, a rope can be replaced by a chain, a wooden board used as a seat can be replaced by a chair, after removing its legs. Be sure to use bright colors, because the abundance of colors is very popular with children.
Video: how to make a garden swing with your own hands
Who hasn't dreamed of sitting on a swing in their own garden, dreamily swaying and looking at the cloudless sky or at the stars. But it's so easy to arrange, you just need to want. Beautiful and modern, located in the garden or on the lawn, in addition to convenience, they also diversify the landscape. In this article we will talk about how to make a children's swing in the country with our own hands from metal, wood, and also show drawings, photos and video materials.
Swings for every taste
Of course, today's market offers many options for finished products. However, if desired, the swing can be made any, for example, for children, designed for light weight, including for infants. They can be the width of a sofa, any shape, for the rest of the whole family. They can be built from metal, wood, or, in general, any utility material.
Before building a swing, you need to determine for yourself their type, they will be used only by children or designed for the whole family. The design of their support and the type of seat will depend on this.
Swings for children should not only be comfortable, but also have particularly strong and reliable fastenings.
If they are intended for a relaxing holiday, then they should meet maximum comfort, but at the same time, withstand a fairly large weight. And, choosing the right material, you can focus solely on your taste, since both metal and wood are equally strong. Various combinations of these materials are quite suitable, and plastic or plastic parts, twisted ropes, cables and metal chains are also used. These elements are designed to facilitate the design and make it more elegant.
The most unpretentious swing, familiar to everyone since childhood, is well-polished boards that are attached to a rack on ropes or cables (sometimes just to a thick tree branch). Of course, fastening to racks is more reliable and lasts much longer. To install such a metal rack, it is best to take three pipes with a diameter of 100-120 millimeters. Two pipes will play the role of racks, and the third can be used as a crossbar on which the swing is hung. You can make this design from wooden bars with a thickness of 100 × 100 mm. However, such a simple design is only suitable for swinging children, given their small weight.
If the swing is intended for kids, then they are made with a back and a fixing bar is made in front.
To build the simplest garden swing for a summer residence, which is suitable for the whole family, you need to make a more stable support. Usually, four support pillars are used for this. They are dug into the ground to a depth of about one meter (at least 80 cm) and concreted. When using metal structures, all cut edges must be carefully sanded with a grinder, otherwise you can get hurt on the edges. The joints of the racks with the crossbar are connected by welding (so a welding machine is necessary).
In the case of using wooden poles for racks, before burying them in the ground, it is necessary to treat the poles with antiseptic agents.
And to connect the racks with a wooden crossbar, bolts with nuts or self-tapping screws are used. At the top of the resulting structure (from any material), a horizontal beam is attached.
First of all, in order to get a seat, you need to make two frames. One frame will be the actual seat, and the second is for the back. And plywood is attached to one and the other frames. Connect the back and seat corners (usually at an angle of 120 degrees). It is not recommended to connect at a right angle: it is less comfortable for sitting, especially for relaxing. To make armrests (optional), you need to set the bars at right angles.
After the racks are installed, the seat is made, you can start hanging it from the top crossbar. To do this, you need to attach strong hooks or special reliable brackets to it. A cable, ropes or chains are pulled through the hole formed. In this case, you need to choose the correct seat height. For this, preliminary measurements are carried out - the legs of a seated person should touch the ground with their socks.
Of course, if you build a swing in the country in this way, then they will be tough, and it is unlikely that we can talk about a good rest. In order to get comfortable in the seat, you can purchase or sew special pads yourself. For longer service life, they can be dressed in waterproof covers made of polyethylene. And if you put a garden awning on the same racks, you can enjoy relaxing in the garden in any weather.
The seat made of two small logs looks very original (diameter is about 85 millimeters, length is 700 millimeters, the distance between the ropes with which they are attached is 500 millimeters). Ropes are stretched between the logs, they are wrapped around each of them, let out again and tightened into three strong knots. This type of swing is suitable for any mounting, but it is designed for only one person.
A flexible seat looks unusual in its own way. In order to make it, it is necessary to fasten one special carabiner on each side of the belt of such a seat. These carabiners are also tied to ropes with strong triple knots. This makes the seat easy to remove.
Swing-bench made of wood
We suggest considering the manufacture of a swing that several children can sit on at the same time. If necessary, you can reduce or increase its size. Birch, spruce or pine is perfect for making. To work with this material, you will need the following set of building materials:
- 15 boards 2.5 m long and with a section of 100 × 25 mm.
- 1 board 2 m, section 150 × 50 mm.
- About 40 self-tapping screws 80 × 4.5.
- 250 self-tapping screws 52 × 3.5.
- Welded chain 5 mm, length equal to the height of the swing.
- Carbine - 6 pcs.
- Galvanized screw 4 pcs., 2 pcs - 12×100 mm and 2 - 12×80 mm.
As for the tools, you will need:
- square;
- roulette;
- pencil;
- a hammer;
- hacksaw;
- plane;
- a circular saw;
- drill and a set of drills.
When buying screws, pay attention to their color. It is better that they have a contrasting shade or wood color. If you purchase contrasting screws, this will give the swing a spectacular look.
So, when you have everything ready, you can get to work. To begin with, it would be nice to prepare a drawing of the future design. By following a plan, it will be easier to get the job done accurately.
If you have not yet decided on the type of swing, then at the end of this article there are many diagrams and drawings that will help you bring your ideas to life. At the same time, the designs for both children and adults are different.
Following the instructions below, you will be able to complete all the work without the involvement of specialists:
- First of all, cut the blanks of 1.5 m each. In this case, the cut should be made at an angle of 90 °. For the seat, you can use a board with a thickness of 20 mm, and for the back, 12-13 mm is enough. To make a seat according to our sample, you will need 17 planks 50 cm long and 15 planks 45 cm wide.
- It is not recommended to tighten the screws without first drilling a hole. This is especially true for pine wood. She may crack.
- To make the back more comfortable, make the details of the base curly. To do this, use the thickest board 150 × 50 mm. 6 such blanks should come out, and with a pencil or marker, draw a contour of the desired shape of the blank.
- The next step is to decide on the angle of attachment of the back. Then fasten the planks with equal pitch. In order for them to be screwed evenly, you need to fasten the ends on both sides, and then the part is fixed in the middle.
- It is also worth taking care of the manufacture of armrests. To do this, you can use a beam of any width. Attach one end of the bar to the back frame, and the other to the seat.
- At this stage, you can fasten the chain to the wooden frame. Optimal for this place is the lower part of the armrest, where it is connected to the seat, as well as the upper part of the frame base on the back.
- The chain is fastened using a nut and washer. If a washer is not used, the nut may enter the wood and compromise the integrity of the structure. As a result, a special element, where there will be a ring on one side and a thread on the other, is fixed to the seat frame and to the crossbar on which the entire structure will rest.
- In conclusion, you just have to connect the rings with a chain, and your swing is ready.
It is best to fix the assembled swing-bench on the A-shaped rack. Strong logs should be used as a support.
Rack manufacturing
Now consider an example of making a rack that resembles the shape of the letter "A". Such a rack is quite reliable, and using strong logs, you can hang a seat of any shape, size and material. For work, you will need the same set of construction tools as for making the seat. The work process consists of the following steps:
- You will need to make two identical racks, with the same size, in the shape of the letter "A". As a result, they will be installed at a suitable distance, and connected from above by a crossbar.
- It is very important to accurately calculate the angle of connection of parts standing vertically. At the top, poles or beams should be fastened with powerful bolts. So that after a while these parts do not diverge, install the crossbars at 1/3 of the height.
- To do this, you can use screws and metal corners. Well, if on two racks, the crossbars will be installed at the same height.
- In most cases, one crossbar is enough at the top of the rack, but you can add another one for more strength.
The structure itself is installed directly into the ground. It is enough to dig a hole up to 80 cm deep. At the bottom, make a pillow of 20 cm crushed stone, insert racks and fill them with concrete. To prevent wood studs from rotting in concrete, they can be insulated or treated with an anti-rot agent.
If children will mainly use the swing, then take care of their maximum safety. Eliminate all sharp corners, and grind all wooden elements with high quality. Although this rule is important for swings for any purpose, which are made of wood.
metal swing
Unlike a wooden structure, a metal swing is more difficult to manufacture. After all, there is no way to do without a welding machine. So, you will need a tool like this:
- welding machine;
- Bulgarian;
- hammer;
- roulette;
- pipes.
We will consider one of the simple types of metal swings, the manufacture of which does not require great skills from you. First, prepare 4 pieces of pipe, 4 m long each. In pairs, cut each end of the pipes at an angle of 28–35°. When comparing, both angles between the pipes must be equal. As for further work, there are 2 directions:
- Drive pipes into the ground, at an angle that is necessary. Next, weld the tops together. The result is 2 triangles with a vertex looking at the sky. This method is considered the simplest.
- This option is more complicated, so it is rarely used by anyone. You should first weld the triangle by adding a crossbar at the base. Further, in the right places, a hole is drilled 1 m deep. As a result of such actions, you will have to lower the triangle into the trench. Although the construction of such a structure will require a lot of effort and time, from the technical side it will be much stronger.
As practice shows, an additional load is unlikely to cause the pipe to burst. The structure will quickly crawl out of the ground. Therefore, consider whether it is worth spending time on a complex support beam with a reinforced bar.
To make a beam, you will need the following set of tools and materials:
- welding machine;
- Bulgarian;
- steel strip;
- pipe;
- reinforcing rod;
- steel rings.
To fix the beam, it will be necessary to make holes in the upper seam of the triangular structure for a smaller pipe diameter. Use a grinder for this work. It is very important to make sure that the seam is not damaged after making the hole. If you find microcracks, then make marks with chalk and scald the seam again when installing the beam.
As a beam, a pipe of a smaller diameter is used, in contrast to the racks. A reinforcing rod of the appropriate diameter is threaded inside. Even under high loads, such a design will not burst in any way, but the maximum will bend.
Next, weld 2 metal rings onto the beam. They are necessary in order to limit the movement of the chain horizontally. Between these rings, a free-wheeling circle made of light sheet steel is mounted. The upper part of the rings in relation to the level of the beam should be 2.5–3 cm higher. Weld another partition on top. The result is a kind of tunnel. The final touch will be the installation of the finished beam in the holes made, after which the workpiece is securely welded.
One of the last stages in the construction of a metal swing is the manufacture of a cradle. This will require the following set of tools and materials:
- channel or corner;
- nuts and bolts;
- primer;
- brush / roller;
- chain;
- drill;
- Bulgarian;
- welding machine.
The size of the cradle can be different single or double. There may also be several cradles on the beam, but in this case you will need to make several tunnels for greater strength on the beam itself. As for the swing for giving, in most cases a sofa or a single cradle is suspended on a beam. The frame should be made entirely of metal. To do this, you can use a corner or channel.
With a corner it is much easier, because if you use a channel, you will have to select bars / boards in size.
It is desirable that the supporting structure be square or triangular, this will not allow the workpiece to bend. Using bolts with nuts to the base, you need to fix the wooden bars. To do this, pre-make appropriate holes in the corner. Thus, the seat will be ready.
The next step is to install the chain. It should be attached to each corner of the cradle. Next, in the designated places, weld steel rings. If they are not there, then you can get by with reinforcement or another bar. There is not much difference, the main thing is to use a solid and reliable material. When the rings are ready, pass the chain through the tunnels.
If there is a need to remove the swing, carabiners can be used. Their presence will also allow you to change the chain without any problems.
Although some weld the chain to the cradle itself tightly. There are no rules here, it all depends on your vision of the situation.
Upon completion of all work, the entire resulting structure should be primed and painted in the desired color (the first coat of primer should be water-repellent). Pre-treat all welding seams with a grinder. This will avoid snagging and injury. So, a metal swing for a summer residence is made.
Unusual
Probably, in every private area somewhere, but an old tire was lying around. And in the garden grows a thick and strong tree. If such a tire is hung horizontally on 3-4 metal chains, then several people can swing on such a swing at the same time. And if the tire is tied with one rope to a tree trunk (it hangs vertically), then one person may well swing.
Since people with original thinking can make a swing in the country, an unusual and interesting option is very suitable. This is a product with a ring made of durable metal. The metal ring is fixed horizontally to the support using four chains. In a special hoop, a so-called nest is arranged from a large number of chains. These chains must be attached with one end around the circumference of this hoop, and the free ends intertwine each other, and thus are fastened. So that the chains do not scratch a person, they are wrapped with a dense and soft cloth, and a special pillow is placed in the nest itself.
Video
We bring to your attention a video dedicated to a homemade swing for a summer residence.
If you decide to buy a swing for a summer residence, then first of all you should look at garden furniture online stores, since the prices in them are often lower than in regular stores. Also, if you are looking for something cheaper, we recommend that you follow the sales in specialized markets.
Scheme
And now, we suggest that you familiarize yourself with the schemes of swings of different shapes:
Often people, equipping country houses or summer cottages, install garden swings. These structures can be made from wood, their car tires, as well as other improvised materials. In order to get a truly solid structure that will last for decades, you need to use the drawings on the basis of which the swing is made of metal.
To create a metal garden swing, various materials can be used. Hence, many design solutions can be found. On the Internet, there are a huge number of photos of garden swings for the garden, which are made by hand. So, to create a garden swing, the following materials are used: metal corners, square profiles, steel I-beams, round profile pipes, tauri (aluminum).
Photo of a swing for a metal garden: freestanding and stationary We draw your attention to the fact that on the basis of these elements it is possible to create benches, as well as small rocking chairs for children.
Before you start creating drawings of a swing in the garden, you need to decide what type of construction will be. So, you can study several ready-made schemes that modern manufacturers offer.
We make a swing in the garden from metal with our own hands
If you are thinking about how to make a garden swing with your own hands for a child, you can take factory-made options as an example. Such products will have the correct shape, calculated design. Specialists offer a variety of design solutions. It is enough just to make something similar with your own hands from improvised materials.
Product classification from the manufacturer
So, let's talk about freestanding garden swings. This kind of swing is installed in any place that the owner considers the most suitable. There is no need to additionally install supports or suspensions. A swing of this kind can be not only made of metal, but also made of wood.
Free standing swing design Sofa type swing can be operated not only by children, but also by adults. You can sit on the swing all together. They are comfortable and safe, have a soft back. During rain and winter, the swing can be removed indoors. The design has a block structure. The product is also made of wood or metal.
"Sofa rocking chair" for giving They make garden swings with a folding back, as well as a mosquito net. They are intended mainly for children. This swing can be equipped with other accessories to create additional comfort.
Photo: Forged metal swing with a roof Forging garden swings are also being created, which have a number of advantages. So, they are installed mainly on country houses. Note that to work with metal, you must have the skills to work with a welding machine. Otherwise, you can contact the experts. So, the swing will be strong and durable. You can make an original product that will become an interesting decorative addition to the exterior of the house, to its landscape. Forged swings are considered the most expensive type of products. However, the price is justified by the decorative parameters.
Advice! Forged garden swings can be used on the site in order to maintain the overall design of the building, as well as the territory adjacent to it, parts of the exterior, which are also made in the form of forging (lanterns, window bars, balconies, benches, and so on).
Roofed park swing
Swings made of metal have a number of advantages compared to products that are made of other materials. That is why on the Internet you can find many photos and projects of metal garden swings. Such products have many advantages. So, their service life is considered the main advantage. The metal is not subject to the harmful effects of factors such as rotting. Breakage of the swing when drying out is excluded.
Swings made of metal are practical. Rain, precipitation, solar energy do not affect the performance of the product. The swing is reliable due to the fact that the metal itself has a high degree of strength. Metal when purchased is not as expensive as other materials. Moreover, wood, which costs more, will not be as durable as metal. On sale there are many types of modifications. In the store you will find a variety of swing options that will suit your preferences.
Despite the fact that the product has an external appeal, it by itself will not fit harmoniously into the landscape of the summer cottage, for example, like a wooden swing. Additional stylistic design of the site will be required. Be sure to add something similar, from forging.
We draw your attention to the fact that you can make a metal structure yourself, but for this you need to have the skills to work with a welding machine. In addition, you need to have your own welding machine or rent it.
As for the positive qualities of the material, then it is worth noting the strength and hardness of the metal. Its strong structure at the same time can be considered as a disadvantage. On the other hand, in the country, strength is needed so that the product lasts as long as possible. At the same time, metal can cause injury. Therefore, a wooden swing in this regard seems preferable. Not only that, metal products are constantly subject to corrosion. Over time, rust can destroy the swing, which will reduce its durability. Metal needs a lot of maintenance. So, the product is covered with varnish, paints and other anti-corrosion agents. , may have a different type of frame. Based on this feature, the following design options are distinguished: collapsible, welded.
Homemade construction with a polycarbonate roof To create a welded swing, you will definitely need a welding machine, as well as other equipment. The result is a strong and rigid support structure that will work for several decades without risk to health.
If there are no skills in handling a welding machine, then you can choose collapsible structures. The basic principle of assembly is to tighten the bolts. Obviously, everyone can do this job.
We draw your attention to the fact that over time, in the do-it-yourself metal swing created at the joints, under the influence of weight and other loads, the fasteners become loose over time. So, there is a backlash. It can provoke the destruction of the swing, and a person can be injured. To prevent this from happening, the connections should be fastened with locknuts and grovers. Do not forget that you need to regularly tighten the connection points with a key.
Frame base A-shaped. The best option is to make a country swing with your own hands according to the drawings. If you look at different schemes, you will understand that the configuration of the supports will be different.
So, the frame base is an A-shaped support. The structure consists of two parts - two crossbars, which are fixed to each other in the upper part. There are supports in which a jumper is not provided. There will be an L-shape.
Another support - with a crossbar, U-shaped. It is noteworthy that it is very simple to create such a design, but its strength will not be the best. The operation of the structure will be safe when the supports are installed in a deep well in the ground, with concreting. In addition, metal swings are divided into two groups:
- stationary - the support of the garden swing is concreted;
- portable structure - fixed on anchors or on bent reinforcement, which is installed in the soil.
The most common are hanging swings in the country. They are practical, convenient and comfortable to use. You can create a canopy over the swing, which will protect it from the influence of sunlight. So, the seat will not heat up, and riding will become even more comfortable.
In order to create a canopy for a children's swing, you can use tarpaulin, textiles, wood with soft tiles in the form of a roof or polycarbonate. However, cellular polycarbonate is considered the best option. Sheets of this material have a transparent structure. Under a canopy it will never be dark and very bright.
What tools are needed to create a swing
Before you start building a children's swing with your own hands, you should make sure that there is a certain set of tools: a grinder, a construction tape measure, a level, an electronic drill, a welding machine, a screwdriver, wrenches, self-tapping screws for polycarbonate sheets. You need to buy materials for work such as metal profile corners or pipes, seating boards, washers for bolts, nuts, stainless steel fasteners, anchors, fittings, carabiners, chains. In addition, you will need several sheets of polycarbonate, protective elements for the frame, anti-corrosion and anti-fungal agents for metal and wood, respectively.
So, initially it is better to create a drawing according to which the work will be performed. The place where the metal swing will be installed is immediately selected. We determine the dimensions of the future structure. The best bench size option is 1.5 meters. This place is enough for two people to sit on the swing at once.
Advice! Be sure to leave a gap between the rack design and the side part. Its minimum size is 30 centimeters.
According to the drawing of a garden swing, the following parts can be distinguished: a support frame with a rectangular shape at the base, a sidewall, which is made of a pair of pipes interconnected by welding, a horizontal crossbar for hanging a bench.
Drawing with photo 
Dimensional drawing With this information, the assembly process can be facilitated. The design of a country swing of this type receives the necessary rigidity. If you choose the right width of the base, you can create a very stable swing. It is better to take the rule as a basis for work: the larger the angle that is at the top of the triangle between the base and the side parts, the greater the stability of the swing. General dimensional parameters are calculated individually. Under them, you can adjust the indicators relative to the roof, benches. Experts without fail recommend creating drawings in which all dimensions of the structure will be indicated. So it will be convenient to build work with materials. And then - there will be no errors, it will take less time to work.
Approximate Dimensions As a rule, work on assembling the frame begins with the side parts. For this, markings are applied to the pipes on the basis. The material is cut with a grinder. Before assembling the structure, it is necessary to re-measure all parameters. Further, by means of welding, the elements are connected in pairs. The result should be two identical L-shaped parts.
The sharp end, which is located at the top of each part, is cut off at the same level. This procedure is performed in order to create a small platform for the support on which the horizontal bar is fixed.
Advice! To work, you must use a pre-prepared template.
The short side is the width of the base frame. Its size should correspond to the distance that remains between the paired pipes of the side parts of the structure. Using a welding machine, the sidewalls are connected to a rectangular support frame. Then the horizontal bar is connected.
Chain seat design When assembling the frame, be sure to strictly follow the rules of geometry: the side racks are vertical. The horizontal beam is used to hang the bench. The beam runs parallel to the base. In order to control the evenness of the base, you need to use the building level.
An important point is the assembly of the bench. This work is especially important if you make a country swing made of metal with your own hands for children. The basis of sitting is made by the frame basis. It is made from a steel corner. In order for the bench to have a comfortable back, you need to position it relative to the seat at an angle of 120 degrees.
Single seats It doesn't matter for whom you are making a swing in the garden, in any case, the seat and back must be smooth. For this, boards or bars, carefully processed with sandpaper, are suitable. The boards are cut to the desired size and fastened to the frame through pre-created holes with bolts so that the heads are "drowned" in the material. Before finally assembling all the structural elements, it is necessary to treat the parts with an antiseptic, varnish. Metal structures are treated with a primer or paint.
Making a visor for a country house
It is noteworthy that it is not necessary to create a visor for a country metal swing. However, if you are creating a swing for children, then care should be taken that they do not get wet or overheat in the sun. As a rule, a rectangular structure is made, which stands on a rectangular frame. A sheet of polycarbonate is laid on top. The roof is made at an angle so that precipitation flows down.
Once all the work is completed, you should proceed to the final processing. The surfaces of the swing are covered with a primer, then with paint of any color. Once the frame is dry, you need to fix the polycarbonate on it. Special self-tapping screws for polycarbonate are used.
Advice! The ends of the sheets are best closed with a special profile. It will protect the material from insects, from dust, and maintain the durability of the entire structure.
The finished metal swing is fixed on a concrete base. If the installation is carried out on soil with a low density, then clamps made of reinforcing bars must be used. In advance, it is necessary to sharpen the ends of the clamps so that they can be inserted into the ground to a depth of 50 centimeters without problems.
An anchor bolt can act as a fastener on a concrete site. As a rule, they are installed separately in prepared places. As soon as the thread is tightened with nuts, it is better to cut off the ends of the screws that stick out with a grinder.
Indoor mini-gardens: photos, varieties, selection ...
Do-it-yourself garden swings are easy to make if you know how to handle tools. All work can be completed in one or two days.
What to make a swing
You can design them from almost everything that comes to hand:
- Wood: beams, trimmings, logs, planks from boxes, boards, slats, benches.
- Metal: pipes, profiles, rods, wires, chains, rings, hooks, sheets.
- Plastic: boxes, chairs, hoops, pipes.
- Shaped parts from sewerage: tees, elbows.
- Bearings.
- Ropes, ropes.
- Tires.
- Thick fabric, tarpaulin.
- Cases and seats of old cars and motorcycles.
As you can see, we can continue indefinitely, but we will limit ourselves to this list for now.
Beginning of work
To properly make a garden swing with your own hands, you first need to prepare a project and drawings of the future design, based on the material you have available. If you are planning to make a metal garden swing, but there are not enough details, you can ask your neighbors, friends, or make them from another material, such as wood.
Prepare a pencil (pen), eraser, ruler, paper, protractor. They will be needed not only for drawing, but also for the subsequent marking of parts. If you can’t start drawing right away (don’t know where to start), then just sketch out the swing drawing, “as you see it”. It will be much easier to draw from the drawing.
Don't feel like you're wasting your time drawing all the details. At the construction stage, you will have to refer to the drawing more than once.
Installation of supports and crossbars
The installation of supports can be carried out in different ways:
- Install two vertical bars or pipes.
- Dig in two large letters L.
- Put two A-shaped structures.
- Mount supports like the letter X.
The photo shows different types of installation. As you can see, the crossbars are also fixed in different ways. In addition to such mounting methods, for example, in the first picture, you can drill the racks at the top and install a metal pipe or a thick rod. It is used as an axle from a cart or trailer.
If you made racks from wide boards, you can drill them out and install bearings in the holes. Close them on both sides with perforated sheets of metal, which are nailed to the board. A rod must be inserted or pressed into the holes.
A more advanced method of fixing the horizontal involves a special design mounted on poles, made by welding from three pieces of metal pipes.
There are several options for mounting supports:
- Set on the ground or dig into it. The option is bad. Due to dampness, the end of the beam will rot, and everything will collapse to the ground.
- Wrap the butt of the support with polyethylene or paint it.
- Concrete the support.
- Install on a special podium or on a terrace.
The second and third options are more acceptable. It is necessary to wrap the end so that the film comes out 20-50 cm. This will protect the bottom of the protruding part of the column from dampness in winter (in snowdrifts). The same must be done when pouring the column with cement. The formwork should protrude from the ground.
Suspension and mount designs
In order for children and especially adults (due to the greater weight) not to fall, it is necessary to hang the swing securely. To do this, you need to find:
- strong enough ropes - you can use slings from parachutes (withstand 150 kg each) or ropes of climbers;
- chains - even those that tie dogs are suitable, but preferably thicker;
- thick wire or long metal rods with a caliber of at least 10 mm.
Fasteners can be completely different:
- From rope. Throw a rope over the crossbar and fix it at the bottom of the seat. Or pull through the saddle and tie a knot at the top.
- Hook or ring.
The second method has several options:
The first two are designed to wrap around shaped crossbars: rectangular and round. They are a kind of clamps with hooks.
The last two are designed to strengthen the hooks or rings in the through hole of the crossbar.
Seat manufacturing
Classic boards and half-logs on a swing have long become boring to everyone.
We will talk about several non-traditional methods for making swing seats. They are easy to make and don't take much time.
Option 1.
The easiest way is to use old chairs or benches made of any material that have broken legs. It's beautiful and practical. There are several ways to mount them on a swing:
- We drill 4 holes in the seat of the chair (blue), pass the ropes through them and tie a rod or a thin metal tube from below. He won't let the rope slip back.
- We fasten or nail the boards to the seat (yellow), drill them. We thread the ropes into the holes and tie large knots. For safety, such knots can be omitted in order to prevent them from blooming and passing through a hole. It is better to simply tie the board with the end of the rope.
- Instead of holes in the seat, we cut out the grooves and wrap the chair (pink) with a rope. But the child can jump, the rope will be released and slip to the side. So that the rope does not jump out, we fill the boards from below.
Option 2.
You can make a seat from canvas or fabric, but it is not very comfortable, as it wraps around the person sitting on both sides, squeezing him. For convenience, you can install a spacer on a rope or chain above the seat and then the degree of girth will decrease.
Option 3.
Make a pseudo-seat from a tire. Hang it on ropes. In the sector facing the earth, stuff soft unnecessary things.
For convenience, take large tires, for example, from the rear wheels of a tractor.
Option 4.
Hoop as a seat. A hula hoop is taken and wrapped with ropes in diameter:
If this is difficult for you, you can put a ring in the center of the hoop and thread the ropes through it. First set the small circle in the center and fasten one cord so that its two ends are on the same side. Then reinforce the twine on the opposite side. And so on.
Option 5.
Use for this an old durable basin, tub or even a trough.
But just sitting on wood, plastic or metal is not very pleasant. For greater convenience, you can put pillows for garden swings on the seat, made of foam rubber and covered with dense fabric or leather. If, during assembly, it is prudent to make soft seats, then no pillows will be needed.
How to make a wooden garden swing
There are two ways:
Option 1.
They represent a seat made of any suitable material, suspended by one or two ropes from a bough.
The photo shows that the ropes can be tied in different ways, the main thing is that they do not slip off:
- on the left side, two ropes are thrown over a branch and fixed at the bottom with four knots;
- in the upper right picture, one rope is suspended from a hook;
- on the bottom - two ropes hang on hooks.
Option 2.
Run the swing entirely from wooden parts. That is, to make supports and a crossbar from beams or logs, and a seat from boards, slats or wooden benches and install as described above.
If you fill in the foundation, fix a downed special shield on it, a podium and install a swing - it will be even better. After all, the supports and the shield do not touch the ground. Moreover, additional bars are installed between the shield and the foundation, which provide airing of the shield.
The drawings of the two structures are shown below.
As you can see, a wooden garden swing is not so difficult to make.
How to make a metal garden swing
Usually, a welded structure is made in the form of the letter P, on which the seat is suspended using hooks with clamps or through.
It is made of pipes of at least 5 cm caliber. You can simply dig or concrete two risers, insert the axle from a wide wheelbarrow or cart into the pre-drilled holes and lock it with mounted wheels.
You can weld a wire with a swing onto the axle, because the axle will rotate freely. For greater effect, you can install it on bearings, as mentioned above.
To perform the second option, you need to weld something resembling the roof of a house. Everything is clear from the drawing.
Structures of this type can also be made from a profile. We will immediately warn you - not from drywall. That profile is very thin and may not support a swinging person. It is designed for stationary load.
The industry produces rectangular pipes, T-beams, I-beams. Here you can make a swing out of them. Their appearance is no different from the other structures described above.
The following options are more difficult to perform, because for their implementation it is necessary or to weld several pieces together.
For pipe bending, a proven method can be applied:
- a mandrel is being prepared;
- the pipe is tightly clogged with sand and corks (wooden);
- then carefully bend the future support along the mandrel.
These structures are distinguished by the fact that they can be easily carried or moved. True, this may require 2-4 people.
How to make a 3-seater swing
Usually, rocking designs involve a single, less often a double option. But now a 3-seater garden swing has come into fashion.
The installation of racks and suspension is identical to those described above, but the width is much larger.
To perform it, you need to make a special elongated seat that would accommodate three people, and install racks at a distance of at least 2 m.
The seat is available in two versions:
- Classic - everyone sits facing in the same direction.
- Modern - the average rider, looking in the opposite direction.
Let's consider the first option. He is easy to perform. For its manufacture, you can even hang a bench that can be seen in parks. But because of its large weight, this is not worth doing. It is better to make a special seat yourself.
It can be made of aluminum pipes or wood. Below is the procedure for assembling the 3-seater seat. Its length is 1500 mm or more, the width and height of the backrest is 500-600 mm.
DIY wooden swing (video)
Loading...