The world-famous Egger company, which was founded in 1961, is engaged in the manufacture of this material. Like many other laminate manufacturers, Egger started out by making wood-based panels.
At the first stages of development, chipboard was the main product, and later the company moved to MDF production slabs that were sold to furniture companies. In 1994, a specialized factory was acquired, and the production of our own furniture began. 2006 was the beginning of a new stage in the development of the company - the production of laminate.
Where is produced?
The first laminate of this manufacturer saw the world almost ten years ago at one of the German factories. Now Egger is the most powerful Austrian concern with an annual turnover of more than one and a half billion euros.
Laminate flooring is produced in 16 factories scattered throughout Europe. The largest production capacities are concentrated in Germany. Recently, production has been established in Russia.
Egger collections and their features
country styleBrilliant
This collection has a luxurious sheen that perfectly complements the relief and structure of the flooring.
classic
The collection embodies the combination of classic ornaments with the structure of natural wood.
Large
Thanks to harmonious combination textures and textures, this laminate accurately imitates Oak, Walnut and Spruce wood planks.
Long
Another realistic collection. The laminate has an increased size in length and width. The decors of this collection imitate Oak, Pine, Ash and Spruce boards.
Country Style Super Plus
The combination of bright colors and pronounced wood patterns is what sets this collection apart from others.
Megafloor
A large collection in which you can find material for any room.
CS King Size
A collection of laminate flooring with larger lamellas. Used in large areas.
Medium
The laminate of this collection has smallest size among all collections. Class 32, suitable for any residential premises.
Classes, thicknesses and decors
The service life of the floor covering directly depends on the wear resistance class. The higher this class, the longer the material will retain its original appearance. Laminate Egger may have 31, 32 or 33 wear resistance class. The manufacturer gives it 15, 20 and 25 years of warranty, respectively.
The thickness of the material determines its strength and soundproof characteristics. The thicker the laminate, the higher these characteristics. But as the thickness of the flooring increases, so does its cost.
Therefore, it is necessary to choose based on the operating conditions and your financial opportunities. The thickness of the Egger material ranges from 7 to 11 millimeters.
Exists a large number of Egger laminate decors. They differ in textures, the presence or absence of chamfers and the nature of the embossing. Each laminate collection has its own combination of these decorative elements.
Benefits of Egger Laminate
- High wear resistance and strength. Egger material will last for decades, retaining its attractive appearance.
- Ease of installation and the ability to dismantle the flooring for its subsequent laying in another room.
- Practicality. No special detergents are required to clean the flooring.
Flaws
- Unpleasant odor that can last up to two weeks after installation of the flooring.
- Specific noise when walking on the floor. But this is more a feature than a drawback.
Laminate Rating
This material is very popular, but at the same time, users note frequent cases of factory marriage. There are many positive and negative feedback about the flooring of this manufacturer.
Egger- a group of companies headquartered in Austria, in the city of St. Johann (Tyrol). It is one of the leading wood processing enterprises. Along with chipboard and laminated chipboard, MDF and OSB boards, the company produces a range of building materials for further processing, lamination, used both for the manufacture of furniture and other construction from floor to ceiling.
Chipboard and laminated chipboard of the Austrian company "EGGER" (Egger chipboard) are high-quality chipboard plates that have proven their high quality. Chipboard Egger is environmentally friendly building material. The special popularity of EGGER boards among consumers was determined by the resistance of the material to various temperature conditions and resistance to high humidity. These qualities make chipboard "EGGER" ideal material for the production of high-quality and environmentally friendly furniture. L furniture Chipboard Egger deservedly enjoys prestige all over the world.
EGGER EUROSPAN - raw chipboard, chipboard without melamine coating
The basis of laminated chipboard is raw wood particle board. Egger Eurospan - raw chipboard are made from wood waste from the sawmill industry and forestry. Coniferous wood is used for manufacturing, as well as high-quality wood processed for the second time - which initially determines the high consumer characteristics of the final product. The resin is bonded with a thermoset adhesive based on synthetic resins with an extremely low formaldehyde content. The hardener does not contain chloride. Thus, a material is obtained that meets the most stringent environmental standards.
Chipboard is one of the most popular materials used in furniture and construction industry. largest manufacturer of these products - the world-famous Austrian company "EGGER", which appeared on the market of wood products in 1961. Its subsidiaries are located in fifteen European cities, there are also in Russia.
The range of products made of wood is striking in its diversity. In addition to chipboard, the company produces floor coverings, MDF, acoustic, combined and compact boards, paper-laminated plastics, and OSB. The chipboard product line is presented more extensively than other products. Egger chipboards are divided into the following groups:
- laminated chipboard;
- unlined wood products;
- window sills and countertops;
- chipboard thin boards;
- light products.
For Egger chipboard production conifers trees are the main raw material. The structure of the fibers in the boards is quite fine, as this ensures an increased density of the middle layer of the product. Austrian manufacturers have made sure that their products are harmless. This became possible due to the use of unique wood-shaving adhesives of our own production.
In their composition, they contain a special component based on synthetic resins with an extremely low formaldehyde content. The high environmental performance of the products is also ensured by the use of chlorine-free hardeners.
Benefits of Egger products
An undeniable fact is that the company's products are of excellent quality and the production of Egger chipboard is carried out in strict accordance with European standards and Russian SNiP. Through the use of the latest developments and innovative technologies The range of products is constantly updated.
The uniqueness of technical and performance characteristics plates provided:
- using 90% coniferous wood as a raw material;
- production of products from fine-grained materials;
- the absence of debris and impurities, as well as a low content of sand;
- ideal edges of chipboard and its surfaces;
- high quality durable coating film preventing mechanical damage products.
Due to the high quality and environmental friendliness of Egger chipboard, it is used in various fields:
- production of furniture for residential, industrial, office and other premises;
- construction industry (construction of partitions, assembly complex structures and sheathing of wall surfaces);
- installation of window blocks with the installation of window sills and ebbs;
- laying floor coverings;
- production of internal doors.
The breadth and variety of applications of products due to its resistance to force loads, external influences, changes temperature regime and humidity.
The company's specialized design department creates new decors and color combinations. Today, Egger has over 220 options in its arsenal. original solutions, allows you to use the material to implement the most incredible design ideas. The manufacturer's catalog contains the following types of Egger chipboard decors:
- white palette, presented in six mandatory options, which differ in the degree of gloss and mother-of-pearl additive;
- 78 shades of a monochromatic range;
- more than 90 basic and 12 additional reproductions with wood ornaments;
- 60 types of designs decorated for various materials;
- 12 creative drawings made using color photo printing technology.
In addition, talented designers have created fourteen varieties of slab plane relief, conveying the effect of living wood, fabric, and worn-out old material.
Egger chipboard production is based on a thrifty approach to raw materials. This concept is being implemented through the use of resource-saving, highly efficient technologies.
Chipboard is widely used in construction and for the manufacture of furniture. There is a wide variety of such plates on the market, differing among themselves not only in cost, but also in quality. One of the manufacturers is a company from Austria with a worldwide reputation - Egger. Her product range is very diverse. The company's product catalog contains more than 200 types of various plates, among which there are plain, colored, with a pattern, imitating the texture of wood and other materials, surfaces. Surfaces can be matte or glossy. Picking up the desired chipboard sheet, suitable for the interior of the buyer, is not difficult.
Distinctive features and properties of the material
Chipboard Egger have high quality, which meets all the requirements of standards (SNiP and EN). The range of products offered by the company is constantly increasing due to new technologies and developments. The following products are produced:
- The sheet laminated by a chipboard Egger - is a part of the Eurodekor series.
- Uncoated boards, countertops and window sills of the Eurospan series.
- Light chipboard Eurolight.
- Thin chipboards.
Chipboard has the following technical characteristics:
- For their production, coniferous trees are selected (in 90% of cases).
- Raw materials for plates are selected only fine-grained.
- The raw materials do not contain debris, sand and other impurities.
- The laminating film is stronger and more resistant to mechanical influences(despite the smaller thickness) than Russian manufacturers.
Wide area chipboard applications Egger:
- as a material for the construction of furniture to be used both at home and in other premises (offices, restaurants, etc.);
- for finishing walls, building partitions and all kinds of boxes;
- as window sills and ebbs;
- as a floor covering;
- for the manufacture of interior doors.
Variety of species
Egger chipboard colors vary depending on the type of board. There are more than 200 of them. The catalog includes the following variations:
- White, which differ in the degree of gloss and the presence of mother-of-pearl. This is the base color scheme introduced in 6 various types: white, platinum, gloss, solid, premium, porcelain.
- Solid colors which include 78 different colors. They can be glossy or matte, saturated or muted. The colors are chosen so that they can be combined in the design.
- Wood reproductions - more than 100 options, of which more than 90 are considered basic, and 12 are designed specifically for the production of interior doors.
- Fantasy chipboard Egger - imitation of materials. There are 60 variations that reproduce marble, textiles, leather, concrete, metal and minerals. Such plates are used for the manufacture of doors, countertops, furniture.
- Color photo printing, which consists of 12 drawings on various topics.
Simultaneously with the decor, chipboards differ in their texture. Egger offers the following types:
- Glossy ("Diamond", "Gloss Finish").
- Matte ("Silk", "Office", "Perfect", "Matex").
- Semi-matte fine-grained ("Granite", "Elegance").
- Volumetric ("Wavelan", "Artwave").
- Mosaic ("Velvet").
Eurospan series
Plates from this series are used for the production of high quality furniture. Chipboard sheet Egger consists of a high-density inner layer topped with fine-grained layers. This allows you to get the perfect flat surface well-kept shape. At the same time, the boards have an even cut and are easy to process (lamination, edge finishing, veneer, postforming).
This series have standard width 207 cm, thickness 0.8-2.5 cm and length 561, 411 or 280 cm.
Plates of the Eurospan series for countertops and window sills perfectly withstand mechanical loads and impacts chemical substances(acids, alkalis, abrasive detergents), without losing aesthetic appeal. And they serve more than 10 years. You can damage the surface with a knife, hot dishes or a cigarette.
They have dimensions of 410x60, 410x91, 410x120 cm with a thickness of 3.8 cm.
Window sill dimensions: thickness - 1.9 and 2.2 cm, length - 410 cm, width - 16-10 cm.
Plates of the Eurolight series
Chipboard Egger Eurolight series, which are also called light boards, consist of two layers:
- Internal, which consists of compacted cellular cardboard.
- External, made of plates with a thickness of 3 to 8 mm.
This structure makes the plates light, suitable for them standard mounts and accessories. They are used for the production of furniture, interior decoration.
Chipboard Egger. Reviews
Wood chipboards have a number of advantages. But despite this, many consumers argue that laminated chipboard is harmful to health. They associate this with supposedly prominent ones, but this is far from being the case. Chipboard is an environmentally friendly material.
When choosing chipboard, give preference to the material that is produced directly by the Austrian by Egger. As they say folk reviews, such material is much superior in quality to goods manufactured at other manufacturing plants. Naturally, the price of such products will be higher than those produced in Russia. But the choice always remains with the buyer.
Company foundation EGGER founded by Fritz Egger Sr. in 1961, when he opened his first chipboard plant in St. Johann in Tyrol. Gradually the company EGGER has grown into a group of enterprises from 17 plants located in seven different countries, with a total staff of 6,500 people.
At present, the group of enterprises EGGER is owned by the brothers Michael Egger and Fritz Egger, who, being the owners of the company, determine its strategic objectives. The day-to-day management of the family business is carried out by the Group Management EGGER represented by Thomas Leissing, Ulrich Bühler and Walter Schiegl.
- From left to right:
- Thomas Leissing - Head of the EGGER Group in the areas of finance, management and logistics (authorized representative of the Group Management)
- Ulrich Bühler - Head of EGGER Group Marketing and Sales
- Walter Schiegl - Head of the EGGER Group in the areas of production and technology
The company has a decentralized management, structurally it is divided into separate areas of activity and organizational units located in different regions.
Only those functions are under centralized control, in the performance of which it is possible to obtain a synergy effect or an increase in productivity, as well as functions caused by a strategic need.
Strategic management is carried out by the owners of the company with the support of the management and management units of the Group.
The goals that are set for the enterprises of the company are determined jointly, and are implemented independently.
In accordance with the basic principles, the company respects the traditions and customs of the countries in which it operates.
The Egger Group integrates into the life of the environment in which it is located, contributing to the involvement of qualified personnel - from ordinary employees to managers - from the regions where the company's plants are located.
The principle of careful attitude to raw materials is in the company EGGER paramount importance. This principle is brought to life by generating energy from our own biomass thermal power plants, as well as through the use of the most modern resource-saving production technologies and environmentally friendly logistics systems.
Company EGGER consciously invests in advanced information and communication systems. Thanks to this, the effective management of the company and the inclusion of partners in the relevant processes of product creation are carried out.
1961 Commissioning of the first chipboard press in St. Johann (Austria)
1966 Acquisition of a plant for fiberboard production in Wörgl (Austria)
1970 Commissioning of the chipboard plant in Unterradlberg (Austria)
1984 Acquisition and construction of a chipboard plant in Hexham (UK)
1989 Acquisition of the laminate plant in Gifhorn (Germany)
1990 Commissioning of the chipboard plant in Brilon (Germany)
1994 Acquisition of a factory for the production of prefabricated furniture elements in Bünde (Germany)
Acquisition of a chipboard plant in Rion-de-Landes (France)
1995 Acquisition of a plant for the production of thin MDF boards in Bevern (Germany)
1998 Commissioning of the chipboard plant in Barony (UK)
1999 Commissioning of the "European plant" EGGER in Wismar (Germany)
Acquisition of a wood-based panel finishing plant in Marienmünster (Germany)
2000 Acquisition of a chipboard plant in Ramberville (France)
2002 Complete reconstruction and expansion of the chipboard plant in Unterradlberg (Austria)
2005 Commissioning of the chipboard plant in Shuya (Russia)
2006 Start of production of EUROLIGHT lightweight boards in St. Johann (Austria)
Start of production of laminated floor coverings by DPR direct printing technology in Brilon (Germany)
2007 Expansion of production capacity at the plant in Gifhorn (Germany) through investment in new installation for the production of paper-laminated plastics.
Expansion and modernization of the plant in Hexham (UK)
2008 Start chipboard production at the plant in Radauti (Romania)
Commissioning of the Group's first own sawmill in Brilon (Germany)
2009 Start of chipboard production at the plant in Radauti (Romania)
Start design work for the installation of an adhesive production plant and a biomass thermal power plant in Radauti (Romania)
All text and graphic information provided by the company EGGER.
Loading...