Screen for changing clothes with your own hands. What are partition screens, their types and features. Sliding screen made of MDF boards

• 2. French connection. The screen can not only divide, but also unite. Installed in a wide space between the windows, it turns out to be the center of attention, preventing the space from “falling apart” into pieces. A screen by Jean Cocteau, a couple of sheep and photographs by Pierre and Gilles bring an element of artistry to the rather conservative interior of this bedroom.

• 3. Collected works. Decorating screens with fake paintings is a long tradition. Such an object is able not only to model space, but also to fill it with new meaning. For example, with the help of a screen depicting shelves with books, it is easy to turn any room into a reading room. And at the same time to emphasize that the owners of the house are intelligent people and are not indifferent to the printed word.

• 4. Open book. To study in detail the skillful painting on the wings of the Japanese screen, you need to place it at eye level. To do this, you will either have to sit on the floor or hang a screen on the wall. The plot must be read from right to left. At the same time, it is advisable to dim the light - after all, twilight reigns in Japanese houses. Then the gold on the screen will shimmer, not scream, and the colors will become soft and refined.

• 5. The third way. This half-empty hotel interior, designed in a neutral color scheme, had every chance of becoming one of those transit zones that do not catch the eye. The situation was saved by a screen, thanks to which the room acquired a new dimension. Of course, we are not so naive as to take the painting for a real landscape. And yet the city streets stretching intoperspective, involuntarily suggestive: where to go next - right, left or straight?

• 6. Hang to the fullest! To fulfill its original purpose - to intrigue and hide - such a screen will not be able to. But thanks to her, in your bedroom there will be no cluttered corners that need to be hidden from prying eyes. For greater practicality, a mirror can be inserted into one of the doors of such a mini-dressing room.

• 7. Divide and Conquer! Make the kitchen isolated or combine it with the living room? The truth lies in the middle, and its name is a screen. For example, the owner of this Parisian loft uses the rare Claustra screen, invented in the 60s by the Cloutier brothers, as a partition.

• 8. Submission from the corner. This corner is a typical "dead zone" - the approach to it is blocked by armchairs and a table by the fireplace. The screen does not just "justify" the existence of this nook. Its mirror doors reflect light and visually expand the space. The only problem is that the screen is located near the head of the bed. Think carefully whether such a neighborhood will suit you: admiring your sleepy physiognomy in the morning is not entertainment for everyone!

• 9. Holy place. The age-old problem - how to use the space under the stairs - designer Kelly Hoppen solved with the help of a screen. The openwork design of black lacquer rings became the backdrop for the yellow "eared" chair. However, in this interior, the screen solves not only decorative, but also spatial problems - it serves as a "watershed" between the dining and sofa areas.

• 10. Reliable rears. Sitting with your back to a door or window is extremely uncomfortable. In this interior, the problem is solved by a screen that forms a kind of niche and gives a sense of security. I can’t even believe that we are not in front of a cozy old mansion, but a modern open space.

• 11. About times, about customs! Since screens first came to Europe, interest in them has faded, then flared up. Another surge happened during Art Deco, when screens made using lacquer, metal and glass came into fashion. The photo shows a typical representative of that era, although this is not an antique, but a skillful stylization. The author of the object is a modern American designer Thomas Fizant.

• 12. Everything on the side. Sometimes screens take on the role of architectural elements (such as columns, niches, etc.), changing the proportions of the room and setting it in a solemn mood. Installed on either side of the bed, they form an alcove.

• 13. Under 16 and over. As they say, comments are superfluous. Before us is an object - useful in all respects. It remains to add that such a screen is useful not only in the nursery, but also in the office or, say, in the kitchen. If you don’t like chalk (it crumbles, after all), insert a magnetic board with a special coating into one of the doors, on which you can write with felt-tip pens.

• 14. Everything is a head! The screen often acts as a headboard. Here, this idea is brought to its logical conclusion: the doors are covered with the same fabric as the bed valance and chair upholstery. But you can do otherwise - play in contrast, making the screen a central element of the interior.

Learning Theory

Answering the question of how to make a screen with your own hands, we can say that in its most general form it looks something like this: you need to make frames, then pull the material over them and connect the frames with hinges so that the screen can fold. In this case, usually the width of each screen cloth is about 50 centimeters, and their height is approximately 170-180 cm: it is precisely if these dimensions are observed that this element of the interior will be easy and pleasant to use.

It is also worth noting that a classic screen, as a rule, should have three or four separate parts, which are usually made from canvases of the same size and pattern. To create a screen with your own hands, you are more likely to need the following tools: a hacksaw, a drill, wire cutters and pliers. If you aim to create a model using metal structures, then you will need a hacksaw and a welding machine.

Let's try in practice

In order for our conversation with you about how to make a screen with your own hands to become concrete, you can write down the “recipe” for its “cooking”. So, you will need 6 blocks of wood, having a length of about 2 meters, and 6 shorter bars, from which the width of the screen will be formed. You will also need to purchase fabric in any color you like. In this case, you should start from the place where this screen will be located. So, for example, for a children's room, you can choose a more cheerful and bright fabric that will create a playful mood for the baby.

In addition, to create a screen with your own hands, you will need to prepare 4 door hinges: in the event that your accessory has three wings. Also, do not forget about the paint brush and varnish, with which you will put in order the frames for the screen. It is worth noting that when doing this work, you also cannot do without nails and a hammer or self-tapping screws. At the same time, some experts use a stapler for furniture and various elements of decorative trim.

The technique for performing the work will be as follows:

1. You need to create a frame from the bars. To do this, we make 3 wooden frames, and then fasten them to each other with screws.


2. We fasten the frames together with the help of door hinges. In order for the base for the screen to be completely ready, cover it with varnish and let it dry well.


3. We cut the fabric to the desired size, while leaving 2 cm from each edge to the hem. Then the resulting blanks are carefully pulled onto the frames and nailed with a furniture stapler. It is very important that the fabric is stretched strongly and evenly. If desired, you can decorate the resulting screen with any decorative elements.

Otherwise, the hand-made screen is ready and you can put it in its place and enjoy its beauty and privacy.

________________________

A screen - a partition is quite an interesting and versatile element of decor, thanks to which you can easily zone a room. Therefore, if you would like to create separate zones in different rooms, then feel free to start making a screen - a partition.




Such a home screen - a partition is quite simple to manufacture, just prepare all the necessary materials and tools.

. Wooden bars 2 m long, 6 pcs;
. Wooden bars along the width of the room (measure the width of the room by dividing by 3) - 6 pcs;
. A piece of dense fabric (choose colors according to your taste or to match the interior);
. tassel;
. Door hinges - 4 pcs;
. Varnish;
. Furniture stapler;
. Glue;
. Self-tapping screws - screws;
. Nails;
. A hammer;
. decorative braid

Instructions for making screens - partitions

1. First you need to make a frame for the screen. We use prepared wooden blocks. From the prepared bars, you need to prepare 3 wooden frames by connecting the bars together with screws.
2. We connect the frames with each other with door hinges.
3. Using a brush, open the frames with varnish to add shine.
4. From the prepared fabric, cut 3 cuts for each frame in accordance with the dimensions of the frames.
5. Glue each of the fabric cuts with glue to one side of the frames, and then fasten with staples using a furniture stapler. Next, stretch the fabric, and secure with staples on the other side of the frame. Make sure that the fabric is stuffed evenly and symmetrically.
6. The front side of the screen - the partitions are ready, now it is necessary to aesthetically decorate the inside of the screen. To do this, use the prepared braid, which is carefully glued to the trimmed edges of the fabric.
After that, all the main work is over and your screen - the partition is ready for use. If you wish, you can easily additionally decorate the screen by decorating it with applications, original inserts and photographs.

We are confident that a hand-made screen - a partition wall, will be a wonderful decoration for your home. Creative success and good mood!

___________________________

The topic of this article is do-it-yourself screen.

As I said in my article, you can zone a room in various ways. Including with the help of a screen.

This is a very convenient option that allows you to change space at the speed of light! Especially if you have several screens of different designs (or the base of the screen is the same, and the panels (filling) are different). After all, the mood can also be different - and the world around should change accordingly!

Panels can be made of fabric, wood, plastic, stained glass.

It is necessary to proceed in the design of the screen not only from the style and color of the interior, but also from the functions that our screen should perform. If it is necessary to tightly fence off some part of the room, then it is necessary to choose less transparent materials. It can be wood, opaque plastic, opaque fabric (or light, but very tightly gathered), possibly a stained glass window.

If you only want to visually separate part of the space, then you can limit yourself to transparent materials, or even make a screen with decorative holes.

And if necessary, the screen can be safely set aside in a corner and free up space, for example, for a party!

You can make a screen quite calmly with your own hands. In addition, you will know for sure that no one else has a screen like yours! With this guide you will make it quite easy!

If you have children, this is a great opportunity to connect your child to the creative process of creation! Everyone will have fun and interesting! The main thing is to connect a little imagination!

You can safely use almost everything that you find at hand: bright shreds of colored fabric, old broken hairpins, pieces of leather (can be cut from an old bag), beads, beads, paints, various ropes, child's drawings, photographs, etc.

And if you feel the strength to do it - go ahead!

So, for the manufacture of a wooden frame, we need the following tools and materials:

1. Directly the wooden planks themselves (we recommend taking pine planks 6 cm wide and about 2 cm thick). There should be 24 pieces: 1.70 m long - 12 pieces, 0.6 m long - 12 pieces. (or take 6 pieces of 1.2 m each).
2. Designed for a screen with three wings.
3. A simple pencil with a square.
4. Joiner's glue with a paint brush.
5. Varnish for wood.
6. Sandpaper.
7. The chisel is thin.
8. Joiner's vice - 4 pcs. (It can be less, but then the process itself will take longer).
9. A hammer.
10. Hacksaw.
11. Wood screws (D = 3 mm, length can be taken 1.5 cm). Approximately 100 pcs.
12. Screwdriver (if any).
13. Steel corners - 12 pcs.
14. Loops - 6 pcs. or 9 pcs. (depending on the type of loops)

First.

So, we take our wooden planks, retreat on each approximately 6 look at the edge on both sides, mark a line parallel to the edge of the plank.

Note: These lines should be on the same side of the plank.

Second.

Along these lines we make a file with a hacksaw to the middle of the thickness of the plank.

Third.

We take a hammer and a thin chisel and make cuts (we remove the tree by about half the thickness of the plank) to the line we marked and file.

Fourth.

We take two long strips and two short ones, apply glue to the inside of the cuts and assemble the frame. We clamp the places of gluing with a joiner's vice and wait until the glue dries.

We do the same with the rest of the planks.

Fifth.

It is necessary to grind the resulting frames with sandpaper. Then coat them with wood varnish.

Sixth.

Now we take the corners and fix our frames with them in the corners.

One of the most original decor elements of any apartment is a screen. The first functional screens, which served to divide the dwelling into functional zones, appeared in ancient Japan. Today, screens are also used to divide the space of rooms, but the decorative role is not unimportant. However, a beautiful screen is not necessary to buy. If you have an interesting design idea, all the necessary materials and tools. In this case, even without special skills, you can make a modern, stylish screen.

Sliding screen made of MDF boards

The easiest way to make a decorative sliding screen with your own hands is to simply fasten the finished MDF boards, which already have decorative door hinges. In order to connect 2 sufficiently high doors, you will need 3 door hinges. After the base of the screen is ready, you can start decorating it. Such a screen can suit any stylistic design of the room. In order to make the screen lighter, you can take plate doors as a basis. In order to give the screen functionality, you can attach wheels to it. And you can make the screen original by pasting it with stickers, painting it in your favorite color, decorating it with photographs, mirror elements, or covering it with a beautiful fabric. You can make such a screen for the bathroom with your own hands.

Screen for a room with a frame

A more complex and time-consuming process for making a screen with your own hands is a screen using a special frame. For such a screen, you can use a wooden or metal frame. Since the creation of a metal frame at home is difficult, due to the use of welding, it is better to make a wooden frame from bars connected to each other with carpentry glue. The finished wooden frame should be primed and painted.

In this article, we offer you a small master class - Do-it-yourself Screen. The design of the partition is not complicated and you will spend only a couple of evenings on it.

The multifunctional screen is made of cedar boards and thin plywood. This portable folding 3-panel screen easily organizes a new living space in your room.

A do-it-yourself screen is made for the room by weaving strips of thin-layer plywood, which will be installed in simple cedar frames.

Note. Instead of cedar boards, you can use any other tree.

Fastened together with copper hinges, screen sections can be installed in almost any room. You can make it to highlight a romantic dining area in a large living room. Or place a screen near a sunny window to create a peaceful retreat without adding permanent walls. You can find many uses for this decorative partition - you have room for creativity.

The screening instructions explain how to make one section. Add as many additional sections as you need.

frame

1. We make a frame, which consists of two legs and five struts. Starting at the bottom, the first and second spacers form the top and bottom borders of the weaves of the plywood strips.
   Cut legs (A) and spacers (B) to the desired length.

1. Mark the position of the spacers on the inside surface of the legs. To make sure the measurements are the same on both legs, fold the legs together edge to edge, align the ends, and tape them together.

1. Draw a reference line at a distance of 260 mm from the lower ends of both legs. These lines indicate the position of the upper edge of the lower brace.

It may be necessary to make a screen for a room with your own hands, significantly exceeding the average human height. Usually, this is a screen for changing clothes.

1. Then draw reference lines 1140 mm up from the first reference line. These lines represent the bottom edge of the second brace. The top brace should lie between the legs flush with their upper ends.
2. Mark the position of the remaining spacer where you want. We placed it at the same distance between the top and second struts, approximately 90 mm apart.

1. Drill two 3mm pilot holes through the outer surfaces of the legs into the center of each spacer. Countersink holes to a depth of 4mm using a 9mm combi bit. Lubricate the ends of the spacers with glue and place them between the legs.
2. Clamp the frame and measure it diagonally from corner to corner to make sure the wood screen is square and the structure doesn't float. Attach the spacers to the legs with 50mm screws.

screen panel

The multifunctional screen has a panel that consists of 14 strips of 6 mm thick plywood. The strips are intertwined and attached without the use of glue. This is easy to do if you are working on a flat, level surface.

• Cut the vertical (C) and horizontal (D) rails to size. Sand them down.

• Place the vertical bars on your work surface. Interlace the horizontal strips of plywood between the vertical strips, alternating direction, to form a panel.

Installing the panel

To hold the panel in place, attach retaining strips along the inside surfaces of the legs and braces on both sides of the panel.

1. Use a miter box or electric miter saw to cut the retaining strips (F) to the correct length from the 20mm mahogany fillet. Cut the ends at a 45 degree angle so they meet at the inside corners of the frame.

1. Draw reference lines on the inside surfaces of the legs, on the surfaces of the spacers on each side, and on each side of the screen panel at a distance of 35 mm from one of the ribs. Place the fillet on the outside of the control lines so that one flat side of the fillet is flush with the line. Attach the retaining strips (fillet) with finishing nails 25 mm long. Drown the nail heads with a punch.

1. Press the interlaced strips of the panel against the retaining strips on the frame and secure the panel by nailing the second retaining strip so that it is firmly pressed against the other side of the screen panel.

Advice. Thin-ply plywood can vary greatly in color, from soft yellow to deep purple, sometimes within a single sheet. Keep this in mind when choosing lumber.

Finishing touch

Wooden screen partitions and their installation is the final step in building a screen section. These decorative elements can be spaced at any distance. Cut them so that they exactly match the distance between the top struts and do not have to be attached.

1. Measure the distance between the top braces and cut the baffles (E) to the desired length. Sand the partitions so that they are smooth.
2. Install baffles between spacers. Install them the way you like visually.
3. Fill any visible screw holes with colored wood putty and sand.

1. Connect the individual elements of the screen with double-leaf end hinges measuring 51 mm. To attach the hinges, clamp the sections together, inserting spacers from unnecessary pieces of wood between them. The spacers should be the same thickness as the hinges. Insert cardboard under the jaws of the clamps so that they do not leave indented marks on the soft wood of the frame.
2. A multifunctional screen made of cedar boards, mahogany and thin plywood does not require additional protective finishing, so we left the screen without finishing. If you prefer a shinier finish, then apply a coat of tung oil to the parts before assembling the whole structure.

Video master class on the topic: How to make a screen with your own hands

Billet specification

Conclusion

As you already understood, making screens is not such a difficult project. Most likely, you will accept this article as a basis and make any additions to your screen. We invite you to look at the photos below, maybe you will find in them the perfect option for yourself.

Multifunctional pipe screen

Write your questions in the comments and our experts will be happy to answer them.

One of the mandatory rules of a quality interior is zoning. A simple partition will help divide the room into functional areas. Even a novice master can make a screen from improvised materials with his own hands. It is enough to use the tips for making a decorative element.

The easiest way

You can make a screen in just an hour if you use a ready-made wooden shield as its basis. It can be bought at a furniture store.

You will need:

• furniture board - 3 pcs.;
• loops - 4 pcs.;
• screws - quantity depending on the design of the hinges;
• instruments.

Step-by-step instruction:

1. The accessory is painted, varnished or aged.
2. The screen is assembled starting from the definition of the front side of the wings.
   
3. The two parts are folded right sides to each other and mark the location of the loops.
   
4. The hinges are attached with screws.
   
5. The third sash is applied so that when the craft is turned like an accordion, all the doors are facing the viewer.
   
6. Screw in the loops. The simplest screen is ready!

From wooden planks

The next method will require some skill and ability to handle a tree. You will need several sanded wooden boards of the same length and thickness, as well as tools and hinges. For decoration, you can use ordinary wallpaper.

Step-by-step instruction:

1. Before starting work, the wooden elements are dried. Otherwise, under the influence of domestic heat, the damp tree will begin to dry out and deform over time.
   
2. The doors are painted. It will also act as a primer for wallpaper. If there is not enough paint, only the ends are covered with it.
   
3. Wallpaper is glued to the doors. To make the screen stable, it is equipped with plastic legs.
   
4. After the wallpaper has dried, the loops are screwed in. The screen is ready.
   

frame screen

This option looks impressive and will fit into various interior styles. If you use a light fabric, the partition will perfectly decorate the Provencal atmosphere, dark and steel shades will complement the loft.

To make a partition you will need:

• wooden slats;
• corners;
• screws;
• roulette;
• pencil;
• the cloth;
• double-sided hard Velcro;
• stapler;
• instruments.

Step-by-step instruction:

1. The slats are sawn in accordance with the dimensions of the future partition. Gather windows using corners.
   
2. Screw on the loops. The number of shutters can be any. It all depends on the size of the resulting frame and the dimensions of the room.
   
3. The fabric is cut to the size of the windows, adding two centimeters on each side. The soft part of Velcro is sewn along the perimeter of the cuts.

A few centuries ago, the screen was a classic attribute of any interior that claims to be pretentious and tasteful.

Nowadays, with the help of screens, you can adjust the space in the house.

Over time, fashion "pushed" the screen, turning it into an antique, of interest only to fashion historians. Now, when the concept of space zoning is returning to the interior, the screen has again become necessary.

A screen is not just a decorative element, but a completely functional detail.

With it, you can hide what is not intended for prying eyes, complicate or make the space more comfortable, and also turn it into an art object, add theatricality and decorativeness, etc.

In the living room, the screen can be made the main decoration of the room.

The modern screen is divided into various types depending on the structure, materials used and purpose.

The original glossy screen is an element of decor.

And if the purpose of the screen can be the most diverse and depends only on the imagination of its owner, then the most popular types in design are the following.

1. Sash.

Until recently, this was the only possible type of screen. The rigid frame of the sash with a fabric stretched over it (paper, glass inserted into the frame, etc.), the sashes are connected to each other like an "accordion".

A screen for the entire length of the room along the wall acts as a decorative element.

Fastening is made with furniture or piano hinges, in some cases with strong soft material (leather, dense fabric, artificial leather). Initially, the frame was made of wood, but later it was replaced with lighter aluminum.

Currently, the main material for folding screens is plastic.

1. Single screen.

This is the main type of office screens. It is used when necessary to divide a large space into smaller, individual "cabinets".

Unusual single-screen screen in the corner for relaxation.

1. Composite.

Recently, this type has become especially popular among those who love drastic changes in their interior. Such a screen is assembled like a puzzle of several elements. The material is usually plastic, but a textile option is also possible.

At the same time, the number of elements, the material for them and in what order they will go, you can choose yourself.

1. Flexible.

This type of screen is the latest invention of designers. The design does not consist of separate wings, but is a single wall of flexible material.

The screen can be easily rolled up if necessary, can take bizarre shapes and be used in various situations.

It can be bent at almost any angle, creating not only small areas in space, but even labyrinths. If necessary, the screen is folded and removed.

A novelty in the world of partitions - a flexible screen.

If you are faced with the question of how to make a screen with your own hands, then you need to proceed from the design features. For example, it is not possible to make a flexible screen on your own, because here it's all about the material. Such a screen can be subjected to design changes or assembled independently.

Making a classic folding screen with your own hands is quite realistic.

At the same time, such a screen will have an undeniable number of advantages:

• M the material is chosen based on your own preferences, as well as the configuration, height, width, etc.;
• W Irma will ideally "fit" into the interior in terms of size, design, color, and style;
• C The price for such an individual design is significantly lower than any other analogues;
• P If desired, additionally, for example, wood craftsmen, artists or professional decorators can be involved in the manufacture.

Since screens are made from a wide variety of materials, it is important not to make a mistake with its choice for a particular room.

A screen for a room can be not only functionally useful, but also decoratively beneficial.

Materials and tools needed to make a screen

Making a screen with your own hands- not a complicated process at all. Having done this for the first time, in the future, having the necessary tools and experience, you can independently improve the technology, develop unique design solutions. But the first screen will require a minimum set of tools and materials. Namely:

1. Screwdriver and drill;
2. Construction stapler;
3. Furniture hinges;
4. Hacksaw;
5. screws;
6. Paint, varnish;
7. Bars of wood of the required length;
8. Fabric for internal filling of the sashes (if glass is used, glazing beads will be additionally needed);
9. Suitable decor.

If everything you need is available, you can start manufacturing.

The manufacturing process, in turn, is divided into the production of a frame for the sashes, decoration and fastening of the sashes.

Step-by-step instructions for making a frame for a screen

The main element in the design of the screen is the frame of the sash. Therefore, frame screens are most popular for self-production. The wooden frame is a regular frame. It is made in several stages.

If the sash is planned to be solid, the material is chosen as light as possible.

Do-it-yourself screen (step by step instructions)

1. Size calculation.
   

   

   We make the marking of the timber (4x4) with the calculation of six bars of one hundred and eighty and six bars of fifty centimeters.

2. Sawing timber bars, according to the dimensions produced.
   

   

3. Pre-treatment of wood for the frame: sanding, impregnation with a suitable compound, priming, painting.
   

   

   We process wooden blanks with sandpaper or a grinder until smooth.

   

   It is necessary to carry out preliminary work to close all irregularities and cracks.

4. There are several ways to connect bars. For example, with the help of spikes (in appearance, this method is similar to a clothing “zipper”). To do this, deep grooves are made along the edge of both bars with a drill.
   

   

   This connection is the strongest.

   After making sure that the recesses exactly match, they are smeared with glue and connected using spikes of suitable size.
   

5. You can also connect the bars with screws. Creating a frame, when attaching the bars, you can leave space for the legs.
   

   

   We fasten all three sashes in this way.

6. Coating with paint matching the color of the interior (stain).
   

   

   After completing the surface preparation of the future screen for the house, paint the tree with the paint you like.

7. Lacquering in two layers.
8. Make a few more similar sashes.
   

   

   We connect the individual sashes with the help of loops.

To complicate the task, the frame can be woven from a wicker, made from openwork metal (forging), decorate the corners of the frame with forged metal, apply the craquelure technique on wood.

Screen decoration

According to the method of decorating, the structures are divided into deaf and transparent. Based on this, the material for filling the frame is selected. If the final product is planned to be transparent or translucent, glass is chosen. It can be corrugated, matte, mosaic, painted, etc.

For glass, notches are made in wooden bars, then it is fixed with glazing beads.

Another material applicable for a translucent screen is sisoflor. But it is difficult to work with him, he is quite fragile.Sometimes, when creating a multifaceted decor, transparent sections of the screen are combined with non-transparent ones. For the latter, cardboard is used.

Cardboard is combined with a floral grid, paper, foil.

The most used material is fabric. And here the scope of design imagination is simply limitless: chintz, fine silk, embroidery, organza, tapestry, painting on fabric and so on.

There are practically no restrictions in decor.

There are also a lot of types of fastening fabric on a block frame:

• With using a construction stapler;
• H pull on rack slats;
• With using decorative loops;
  
• "Plant" on glue with a rubber base;
• With using specialized pins.

Over time, when making a screen with their own hands, each master has his own secrets, methods of fastening and decorating.

VIDEO: A screen is a stylish way of zoning space.

Screen in the interior - 50 photo ideas: