Looking to buy a gas boiler? The Thermomir online store offers a wide selection of heating and water heating equipment from leading Russian and foreign manufacturers.
Our catalog includes gas boilers of the following types:
- Double-circuit. Do you need a gas boiler for heating a private house? The two-circuit device will become good choice for home or summer cottage: a heating boiler of this type, in addition to being used for its intended purpose, can work as instantaneous water heater providing space hot water. In summer mode, water heating does not require the heating to be turned on!
- Single-circuit. Single-circuit heating boilers are designed for space heating, however, when buying a boiler indirect heating(in some models it comes with the factory), can perform the functions storage water heater. It should be noted that given function does not affect the quality of heating. gas boilers heating in the summer can only work in water heating mode.
- Floor-standing gas boilers for a private house, the prices for the initial models of which are quite low, differ good performance performance, reliability, unpretentiousness, environmental friendliness and really high service life. A foreign-made heating (gas) boiler can easily be in operation for 50 years or more. Of the minuses, it is worth noting the need for a separate room with high-quality ventilation system, as well as a channel for the removal of flue gases.
- Wall-mounted gas boilers in Belgorod are very popular. Their main advantage over floor counterparts is low requirements: their operation does not require a separate room equipped for a mini-boiler room.
You can buy a gas boiler in Belgorod without leaving your home, directly on the website of the Thermomir online store. Looking for a specific wall-mounted or floor-standing gas boiler for a private home? The price, type of boiler and other parameters are set using a special filter on the left side of the site. Knowing exactly what you need, you will quickly and easily find it in our catalog.
Poor understanding of the topic? Not sure what is the best choice for your specific situation? You see similar gas boilers, the prices of which differ significantly, and do not understand why? Just call the number indicated in the header of the site and our specialists will absolutely free of charge help you choose the equipment that is best suited for solving your particular problem. You can place an order right away!
We remind you that there is a delivery service for residents of Belgorod and the region. You can check the details by contacting our operator, or by visiting the appropriate section of the site.
Market heating equipment represented by a huge variety of models, as well as manufacturers. Moreover, not only foreign brands are in great demand, Russian companies do not lag behind them in popularity.
Some of them have been producing gas equipment for a very long time and managed to prove themselves from the best side.
Floor-standing gas boilers of our production are in the greatest demand, and this is not surprising. They have long terms exploitation, thanks to its design features, besides, they are cheaper than foreign analogues.
Variety of boiler equipment
Local manufacturers produce floor heating devices of various modifications. They are divided by type of fuel into:
- running on natural or liquefied gas
- solid fuel
Floor-standing gas boilers made in Russia have a power range from 11 to 68 kW and can be used not only for heating private households, but also in industry and agriculture.
All models domestic manufacturers are carried out taking into account the peculiarities of the gas pipelines of Russia and the CIS countries. This means that they work successfully under reduced pressure. As a coolant in such models, not only water can be used, but also liquids that do not freeze at low temperatures.
The latest samples tend to minimize the size, which gives great opportunities when choosing a room for their installation.
Popular Russian manufacturers
Outdoor gas equipment produces several domestic enterprises. The most famous of them is the Zhukovsky Machine-Building Plant (ZHMZ). It was organized in 1939 on the basis of repair shops.
Initially, the enterprise specialized in the aerospace industry, and only since 1967, the production of boilers of the AGV-120 series was launched.
It turned out to be successful and after a short period of time it was already in great demand. Today, the company's product range includes about 400 models. Of these, the floor include:
- KOV-STPV
- S-Term
JSC ZhMZ is the largest Russian manufacturer. Its products are in great demand not only in Russia, but also in neighboring countries. It is considered reliable and inexpensive, as well as completely autonomous and independent of electricity.
Another fairly well-known manufacturer of boiler equipment is the Borinskoye plant. It got its name from the village in which it is located. First gas appliances the company began to manufacture in 1976, and by 1992 it was already a fairly well-known company, actively developing its production.
A number of devices are equipped with foreign automation, for example, the EuroSit brand. except gas models the plant produces solid fuel and universal heating boilers.
The Lemax plant, located in Taganrog, began its production of boiler equipment in 1992. Now the enterprise produces single-circuit and dual circuit models operating on both gas and solid fuels. All of them are assembled from imported components. The most famous samples from this manufacturer:
Another enterprise located in Taganrog, which also specializes in the production of gas equipment, is the Mimax plant. It produces two series of equipment:
Rostovgazapparat is a company that has existed since 1959. Its production facilities are located in Rostov-on-Don. It produces equipment with cast iron and steel heat exchangers.
The range is represented by the following models:
- AOGVK Rostov
- KGDO Siberia
- AOGV Rostov Siberia
All samples are equipped with imported automation.
Most wanted models
It is very difficult to consider the features of absolutely all devices of domestic equipment, so we will focus on those that are in the greatest demand among the population. One of them is a Russian-made gas floor-standing boiler AOGV, manufactured at ZhMZ.
The main heat exchanger for them is manufactured on an automatic line, which allows you to avoid marriage. Its design uses turbulators that change the direction of the exhaust gases and, taking heat from them, transferring it to the heating system.
In such devices, the efficiency reaches 89%. In double-circuit models, an additional circuit is made of copper, which allows you to get hot water immediately upon opening the tap. The boilers have a new burner design that provides for complete combustion of fuel and operation at reduced pressure in the gas main.
Advantages and disadvantages of domestic equipment
You won’t surprise anyone with new devices in the heating industry. Manufacturers offer a wide range of such products.
Usually the preference is given to quality and conformity climatic conditions. These parameters are fully met by floor gas boilers, which are produced by Russian manufacturers.
The devices have a number of advantages:
- have optimal efficiency
- the cost of equipment is much lower than foreign
- can be used for any area - from the smallest to the largest
- big service base and the availability of spare parts in any corner of the country
But, speaking of the advantages, it is impossible not to note the disadvantages that take place:
- large dimensions and weight of the boiler
- appearance that does not fit into modern design premises
- not enough hot water
- the impossibility of installing several heating circuits and adjusting the temperatures in the heating system
Which model to choose?
The greatest demand among the population is for floor-standing gas heating boilers of the AOGV and AKGV series, OJSC ZHMZ Russia produces them in the following versions:
- economy
- station wagon
- comfort
This gives the consumer the opportunity to choose the model that is optimal for him, both in terms of design features and price.
The heating equipment market is saturated with products of the most different quality And price category. Russian-made gas boilers successfully cope with their task and are worthy competitors to foreign counterparts. Many outdoor gas domestic heating boilers have a much lower price than foreign units with the same operational characteristics. And it attracts consumers.
Quality plus functionality
Judging by the opinions of experts on gas equipment, if we evaluate the quality, durability and the possibility of trouble-free after-sales service, then all gas units can be arranged in the following hierarchical order:
- German and Swedish multi-fuel boilers are leading in terms of workmanship and technological innovations - with software and compact but efficient heat exchange units.
- In second place are Italian, Spanish, Czech, Slovak and French units, which are quite a bit short of the market leaders in terms of equipment.
- Experts assign the third place to heating boilers of Russian production and Ukraine.
However, consumers do not seem to agree with this conclusion, since domestic gas boilers are the undoubted leaders in terms of sales. And the secret here is simple: they are not difficult to operate, reliable, not expensive, especially when you compare prices with European products of this line.
So, for example, if we compare two-circuit units with closed cells combustion with a capacity of 24 kilowatts: Vaillant TurboTEC Plus VUW 242/3-5 and Neva Lux 7224, the second option costs almost 2.5 times cheaper. If our consumer, who does not like to call service workers, but tries to figure everything out himself, will choose, then what will he prefer? Of course, an inexpensive analogue that produces the same power, albeit not as beautiful and not equipped with cutting-edge software.
Which domestic manufacturers are better
Among domestic manufacturers, we will consider for comparison with foreign counterparts and for clarity of the quality of the model of the following enterprises:
- Zhukovsky machine-building;
- Rostovgazoapparat;
- Concord (also Rostov-on-Don);
You can often see gas in stores floor standing boilers Russian-made SEZ Energozapchast, Borisoglebsky KMZ, Kirov Plant.
All of the listed manufacturers deserve attention and try to produce units of different price categories, taking into account the realities of operation of the units in the Russian winter.
Zhukovsky Machine-Building Plant
It is noteworthy that the automation for their boilers at this plant is made by themselves. This applies, for example, to the units of the main Economy series. Prices for devices may differ from dealer to dealer, but they are still not high and are available to a wide range of consumers.
The boilers are non-volatile, that is, they do not need electricity for operation, they are equipped with piezo ignition, you can choose a boiler of the required thermal power. As a coolant, ordinary water or antifreeze is suitable for them. As for the method of circulation of the coolant, it also does not play a role - you can connect the circuit with both a natural and a forced system.
They are designed to run on natural gas, but if you change the nozzles and igniter, you can also transfer to liquefied gas.
A series of boilers "Universal" is equipped with SIT automation, also with piezo ignition, there are cheaper and more expensive models, depending on the power capabilities.
Mertik Maxitrol automation is built into the Comfort units. The spread in prices for boilers of this series is explained by the fork of thermal power - from 1.6 to 63 kilowatts. They don't need electricity. Boilers that produce a heat output of up to 29 kilowatts can be adapted for liquefied gas.
It is very convenient for the consumer to have detailed and clear instructions for the operation of boilers, which accompany all models of the plant.
What Rostovgazoapparat offers
This is the oldest factory for the production of gas-fired heating boilers.
and among domestic producers are distinguished by the fact that they are most boiler market.
Boilers are produced under several brands:
- Siberia. It has an Italian SIT control unit. Power characteristics range from 11.6 to 35 kW.
- RGA. Same automation. Power up to 17.4 kW.
- AOG. They have automatic own production. Power 11.6 - 35 kW.
What does the Rostov plant Conord produce
A Russian gas boiler with a cast-iron heat exchanger can be bought under the Conord brand.
The power of steel units is from 8 to 31.5 kilowatts, cast iron - 16.25.33 kilowatts.
They have constantly burning igniters with piezo ignition, boilers do not need electricity. The units are not expensive, slightly different in price towards increasing equipment with a cast-iron heat exchanger.
The units have naturally aspirated atmospheric burners. The plant has extensive experience in the development of gas heating equipment and consumer requests have been carefully studied. The manufacturer positions the performance of its units at gas pressure in the main pipeline less than half of the nominal. And this, as a rule, is the prerogative of boilers with a pressurized system.
Results
Considered, of course, not all products of Russian manufacturers. However, from the above, we can draw conclusions.
For heating a private house, the Russian gas boiler is quite suitable in all respects, although it cannot boast of a level of service like that of German and Swedish branded units.
However, our boilers are made to last, look solid and work out their price. If the design, which was inherited from the last century, was slightly corrected, it would be very good.
On this tab, we can define certain structural units for the desired garage. The garage heating assembly has some components. Each element is very important. Therefore, the selection of each element of the system must be done correctly. The heating scheme includes a connection system, pressure-increasing pumps, fasteners, pipes, thermostats, batteries, an expansion tank, collectors, an air vent boiler.
Russian-made gas floor standing boilers are also produced by Closed joint stock company"ZIOSAB". The plant produces over 15 models of boilers. The plant produces boilers, both of its own production and under the license of the Finnish company Finraila.
CJSC "ZIOSAB" produces boilers in accordance with the world standards of boiler building, both minimum power and rather powerful boilers with a value range up to 3000 kW.
According to consumer reviews, Russian-made gas floor-standing boilers are not able to compete with European manufacturers.
Russian manufacturers of gas boilers
In Taganrog, there is a plant for the manufacture of boiler equipment - Lemax. Models produced at the plant consist of imported components and operate on both gas and solid fuels. Lemax produces models of boilers with one circuit and double-circuit models. The most popular models of the manufacturer Lemax: Leader, Gazovik, Plus.
In Russia, there are other companies manufacturing heating equipment: the Mimax plant (Taganrog), the Rostovgazapparat company.
Complete set of domestic gas boilers. Types of boilers
A wall-mounted boiler is usually considered compact, this is, to some extent, true. For example, Buderus floor gas boilers will be more than 30 percent of the wall line of the same manufacturer. In such devices, there are three mandatory elements: gas burner, fittings for adjusting the gas supply and the heat exchanger itself. You can find steel and cast iron heat exchangers, but due to their greater weight and high cost, they still prefer to replace them with copper ones. Also, do not forget about the built-in automation of the boiler.
Additionally, any wall-mounted device contains a built-in pump that drives water around the circuit, expansion tank And safety valve. Mandatory system of control, protection and self-diagnosis. She "vigilantly" monitors the state of the fuel: in case of leakage or lack of gas, the automation stops the work, gives a signal about a malfunction. The Zhukovsky floor-standing gas boiler (or a floor-standing unit of any manufacturer) will work in the same way.
Mini-boiler rooms located on the floor have, in fact, the same device as wall-mounted units. They are based on the same heat exchangers, usually installed from a copper composition (with operational errors and for reliability, they often use and steel structures). Two types of burners are installed in gas floor heating boilers: atmospheric and pressurized (also called hinged, fan, replaceable). Atmospheric ones are somewhat cheaper, they work silently. Hinged structure more powerful, works with full efficiency, but the price for it is always set higher. As a rule, Ferroli boilers are bought with such parameters - which have proven themselves both in quality and design.
Outdoor gas boiler: how to choose the right one
The choice, first of all, should be made taking into account both the proposed area for heating and the power level, which does not always mean the same thing. In the absence of space, also in small spaces located in middle lane, you can do with an ordinary mounted boiler. But in the case of a house built in a cold climate with a large need for heating, it is better to choose a more powerful unit. For floor gas heating boilers, prices are higher, but the efficiency of work will be appropriate.
By the way! Wall devices are considered the cheapest (installation can cost up to $ 1000), easy to install, suitable for small spaces.
Quite often they are single-circuit, which allows only heating the room, for example, you need a boiler to heat water. Of course, there are single-circuit floor-standing gas boilers, but even their heating power is much higher. Such a mounted boiler will suit the owners small house that use other means to heat water: a boiler, a column, a fireplace with a water circuit, and so on.
Most owners of private households with an area of 200 square meters or more will prefer floor version with power control. These most reliable devices (with the same “stuffing” as the mounted unit) require maintenance about once every three years, and provide more power. Their cost is higher, especially if it is a gas double-circuit floor or wall-mounted boiler, in principle it does not matter, one piping of a floor gas boiler will cost at least 500-600 USD. but subsequent minimum expenses on services in a life compensate for it.
Generally divided into two areas
Floor-standing units with a double circuit will be beneficial to owners big houses that were "conceived" without being connected to central system initially. Single-circuit floor gas boiler - not the most convenient option, since you have to branch the system even more when you turn on, for example, a column. The dual-circuit system, although it does not allow working in the heating and water heating mode at the same time, is leveled due to simple laws physics.
Russian floor-standing gas boilers today are presented in a wide range of products, among which you can find enough inexpensive options acceptable to many domestic families. Tellingly, today these neat devices are not "sillier" than their foreign counterparts. It is also worth noting that in the domestic market, industrial gas boilers are gaining no less popularity than domestic ones.
By the way! They are equipped not only with high-quality boards, but also with weather-dependent automation, which allows you to keep the temperature in the house from fluctuations even before the moment when it changes inside the room.
For example, Lemax floor-standing gas boilers with a similar modern thermostat “thinly” feel weather. To do this, their temperature sensors are also taken out into the street. The devices measure the temperature there, and already according to these indications, the floor boiler can be reprogrammed in advance for changes in the microclimate in the house itself.
A little more about Russian production
Other Russian high-quality outdoor gas boilers "Buderus" allow you to adjust the "weather in the house" for some period of time, setting indicators. For example, during the week, the owners will not be at home more often than usual, so you can reduce the power of the boiler. And for the Christmas holidays, all family members will gather in the family nest - the boiler is programmed to work with maximum efficiency. This greatly simplifies the life of the owner of a private house: he does not need to worry about the temperature in the house, he only needs to spend 15 minutes on weekends setting the thermostat.
Reviews of domestic floor-standing gas heating boilers are usually positive. This suggests that Russian craftsmen have long learned to produce beautiful, high-quality and, most importantly, reliable products with excellent automation. Also, the purchase of such boilers can be much cheaper, and the maintenance of Russian equipment will be carried out by specialists from the manufacturing plant itself. They know their product better than anyone else, and you won’t have to wait for repairs for a long time - all spare parts are “at hand”, and not in a foreign company.
In Russia, a lot of houses are heated by gas. And no wonder. The deciding factor for most is low price for fuel.
By the same logic, they usually buy a boiler. Foreign manufacturers, no doubt, can shine with both service and quality.
But the prices for their products are much higher than for domestic ones.
Russian-made gas boilers have a capacity of 11-68 kW and can be used in private homes, in agriculture and in industry.
First, let's figure out what gas boilers are in general.
Single and double circuit
The single-circuit boiler is designed for heating only. Double-circuit boilers also provide the owners with hot water. It is advisable to install such a boiler where the flow of heated water is small (if the flow is high, it is better to think about installing a single-circuit boiler with a boiler). The heat exchanger in double-circuit boilers can be bithermic and separate.
The principle of operation and connection of a single-circuit gas boiler
The first one simultaneously heats both water for heating and for water supply. The second option - different heat exchangers, which extends the life of the boiler. But, if it fails due to scale, the system will remain without heating! If we talk about cost, the bithermic option is cheaper.
A single-circuit boiler can be made with a boiler. It will provide the house with hot water, and at a price the installation is comparable to a double-circuit boiler.
Wall and floor
Wall-mounted gas heating boilers are mainly double-circuit and have a power of up to 20 kW.
Such a device is enough to heat a room up to 200m 2, and outwardly they are much more attractive.
Traditionally, however, it is believed that wall appliances are best bought for small houses, although many floor units have less power.
A wall-mounted boiler is 2–2.5 times cheaper than a Russian-made floor standing gas boiler. But according to statistics, ¾ of the boilers bought in Russia are floor standing.
Conventional boiler and condensing
IN condensing boiler there is an additional heat exchanger in which exhaust gases are collected. Their heat can be said to be "secondarily" used by the appliance. Result: up to 30% gas savings. But 70% of the indicators of harmful emissions are reduced. The efficiency is much higher.
Floor standing condensing gas boiler
Installation and start-up of boilers may only be carried out by specialists. When self connection, at the first check, the owner will be fined!
Popular Russian manufacturers
Several companies are engaged in the production of gas boilers in Russia large enterprises. Let's consider some of them.
ZhMZ
Zhukovsky Machine-Building Plant was founded in 1939 as an enterprise in the aerospace industry. Later, the production of boilers of the AGV series was launched, which were well received by the consumer. Today is one of famous manufacturers boiler equipment not only in Russia, but also in a number of foreign countries.
Boiler AKGV from ZhMZ - scheme
Up to 30% of ZhMZ boilers have a power of 11 kW (this indicator is easy to recognize - look at the first digit in the boiler name). All boilers ZhMZ - only floor.
Example: AKGV boiler - 11.6 - 3. Its power is 11.6 kW. Weight - 35kg. Dimensions: 850x310x412 mm. Efficiency - 86%. The price varies from 10-20 thousand rubles.
Gazapparat
A Russian-made double-circuit gas boiler can be purchased from Gazapparat OJSC, they produce popular double-circuit boilers Neva and NevaLux.
Example: Since 2007, the plant has been producing NevaLux - 8224 boilers. Installed in the combustion chamber water cooling so that scale does not form so quickly in the heat exchanger. The model was equipped with more wide pipes. Reduced emissions carbon monoxide by upgrading the burner. CO in flue gases is 10 times less than what GOST allows.
The main trump card of a gas boiler is the availability of an energy carrier. : parameters heating appliances and installation rules.
About the construction of the furnace long burning read with your own hands.
And here you will learn about the principle of operation of automation for a gas heating boiler. What is its convenience? Types of automation.
Rostovgazapparat
JSC "Rostovgazapparat" - another guard, founded in 1959 in Rostov-on-Don. Approximately half of the boilers manufactured by Rostovgazapparat with heat exchangers made of steel or cast iron are boilers with a capacity of 23 and 29 kW. Automation in the units is imported. Models produced at the plant: AOGVK Rostov, KGDO Siberia, AOGV Rostov Siberia.
Conord
The Rostov company produces double-circuit boilers "Don" with a capacity of 16, 20, 31 kW.
In addition to the fact that the boilers operate on different fuels, they are equipped with the following useful features: automatic ignition, high / low flame function, which allows you to save up to 20% of gas.
Replaceable coil. This part quickly fails and it is very convenient that it can be easily replaced.
Borinsky
JSC "Borinskoye" got its name from the village where the plant has been located since 1976. The enterprise produces both gas-fired boilers and solid fuel and universal ones. In some models, for example, EuroSit, imported automation is used.
The most popular models and prices
Prices for Russian-made gas boilers vary from manufacturer.
ISHMA BSK from OAO Borinskoye. Double-circuit gas boiler 12.5 kW, designed for 120m 2 area. Gives water t - 95 0 C. Price - approx. 17000 rub. The heat exchanger is copper, does not depend on electricity.
Danko 10X from “Agroresurs”
Danko 10U from Agroresurs CJSC. Single-circuit boiler 10kW, designed for 90m 2 area. Gives water t - 90 0 C. Price - approx. 14500 rub. Steel heat exchanger, does not depend on electricity.
"Don 50" universal floor boiler with an efficiency of 85%. Power - 50kW, designed for an area up to 500m 2. Gas consumption per day is about 9 m3. Does not depend on electricity.
Advantages and disadvantages of domestic equipment
Domestic manufacturers, developing their products, do not focus on style and fashion technologies but on quality and adaptation to local conditions. And therefore Russian boilers:
- Adapted to climate, temperatures, pressure drops in the line.
- Easy to maintain.
- Repairable, spare parts are easier to buy.
- They work on bottled gas - you can put it where there is no highway.
- Huge price difference! Russian boilers are two or even three times cheaper than similar imported ones.
Our boilers have shortcomings, in comparison with foreign units, but this is how you look ...
- Imported boilers are more advanced in terms of automation, electronics, they can regulate t up to half a degree, etc. But sometimes, in our conditions, they quickly fail, or cannot use all the functions on full power.
- Domestic boilers are bulky, more like an industrial unit than a home appliance. The imported model will fit into the modern design. But sometimes the beauty of such a technique is not needed. Especially if there is a separate boiler room. In addition, the latest models of many domestic factories have noticeably decreased in size and, apparently, they are also working on the design.
- Russian boilers are generally less efficient and have lower environmental friendliness. But this does not apply to all devices. Some of our businesses are working on improvements in this area.
If you want to choose a bath boiler according to special parameters, then it is easier to make it yourself. You save money and get exactly what you need. : step-by-step instruction for manufacturing.
Which stove is better for giving: Russian, Dutch, or maybe a fireplace stove? we will consider all types of furnaces and figure out which one is more appropriate to install.
Which model to choose?
Which boiler model is right for you will depend on many factors.
Try to weigh them and take them into account. Having decided whether the boiler will be floor or mounted; single-circuit or double-circuit, you need to calculate the power.
An approximate calculation can be made for a house with well-insulated walls and ceilings of about 3 m. 10 m 2 will require 1 kW of power.
Pay attention to what gas pressure in the network the device is designed for. If, for example, by 20 mbar, and the actual pressure in the line is 10 mbar or less, then the unit will not work at full capacity, and there is no point in overpaying for this power.
Is the unit dependent on electricity? Many imported models are equipped with pumps, fans, programming ... all this is good if you never have power outages. If breakdowns and planned shutdowns occur, then it is better to purchase a simpler but more reliable device. Most Russian boilers do not depend on electricity.
Read reviews. There are sites that specialize in reviews, where you can find the opinions of the owners of a particular model.
Heating system of a private house - calculation of a gas boiler
Is there a repair shop or service center near you? A private conversation with the masters can give a lot. Ask them - what models of boilers are most often brought in for repairs? What breaks and how much does it cost to fix?
So. Russian-made gas heating boilers cannot please with beauty and fine tuning. But reliability and endurance in the most difficult working conditions are a trump card domestic technology. And most importantly, the price is much lower.
Related video
For some reason, I do not trust such things to the same as myself, Russians, Russian manufacturers. Maybe I'm wrong, but in my opinion, our country still has too little experience in the manufacture of gas boilers, since we are not a gas country at all. We are heated by anything, but not gas. And they don’t extract it from us, besides, maybe I’m wrong. Most likely I'm wrong. But something I have no confidence, no brains, and no common sense. And in general I'm a weirdo.
–
Many of my friends have a Danko boiler and the reviews are contradictory. On the one hand, it is reliable and durable, it only requires periodic cleaning. On the other hand, it is not very economical.
For some reason, I do not trust such things to ours, Russian manufacturers. Maybe I'm wrong, but in my opinion, our country still has too little experience in the manufacture of gas boilers. Most likely I'm wrong. But there is something I don't trust.
Loading...