Stainless steel sink adhesive. Installing a recessed sink in a countertop. Preparation for installation activities

Add site to bookmarks

  • Kinds
  • Choice
  • Mounting
  • Finishing
  • Repair
  • Installation
  • Device
  • Cleaning

Attaching the sink to the countertop

The kitchen, as you know, is one of the most visited places in the house, so you want it to be not only multifunctional, but also beautiful. In this regard, the design of the kitchen is becoming more diverse, while the subject of design is increasingly becoming equipment that is intended for domestic purposes.

Mounting the sink in the countertop is a fairly simple process, it is enough to have essential tool and knowledge of several aspects of the installation.

sinks on modern kitchen are a guarantee of comfort and cleanliness. When a new sink is purchased, it must be attached to the countertop. They can be of different shapes - round, rectangular, square. In order to do this, it is not necessary to seek help from specialists, everything can be done by hand.

When attaching a kitchen sink to a worktop, consideration should be given to overall design cuisines and taste preferences.

To make fasteners for a kitchen sink to a countertop, you must have certain skills. In this case, you need to use the following set of tools:

  • drill;
  • diamond disk;
  • various parts with which fastening is carried out;
  • putty knife;
  • sealant;
  • brush.

Mounting the sink to the countertop

High-quality fastening of the sink is possible only with a normal thickness of the countertop.

Installation begins with the fact that you need to mark on the countertop the selected place under the future sink. To do this, you need to use the template, with its help you can easily determine the place of washing. After that, a hole should be cut in the countertop required dimensions, for this a jigsaw and a drill are used. To make it convenient to work, the sink must be placed on the floor, then installation will be easier.

After the edges are completed, they must be cleaned of dust and sawdust, the existing sections are treated with a sealant, so the countertop is protected from negative impact water. To protect it, you can use epoxy or silicone. In the event that the countertop is made of plastic, then to process the sawn holes, you must use an alcohol sealant, such material is applied with a brush and a spatula. protective agent should be applied in an even layer so that the holes are enveloped, after that there will be excess, they should be removed.

In order to attach the sink to the countertop, it is recommended to use fasteners. The sink is applied to the countertop and the place of future fasteners is marked. To do this, you need to use a cutting machine and a diamond disc, the place for fasteners should be made at the marked angle. With high quality fasteners, the countertop can be installed properly and when it is in use, the sink will not rock from side to side.

Before installing all the elements for fasteners, it is done, after which you need to check if there are defective places, if everything is in order, then the installation starts and is fixed right amount slotted bolts.

When the sink is attached to the countertop, you need to make sure that the sealant is completely dry, put a special gasket on the contours, you can lubricate its edges with silicone.

Back to index

After all these steps are completed, the sink is carefully placed on the countertop, if there is excess silicone, then it should be removed in a timely manner. Fastening does not have to be done in such a way as to screw in the bolts with all the force, this is especially important if the surface is made of soft material, for example, from wood, as cracks may form.

After that, the sink should settle down properly, during which time all the hermetic materials that were used in the process of attaching the sink to the countertop stabilize.

It should be borne in mind that a do-it-yourself tie-in can only be carried out with a jigsaw. If there is no such jigsaw, it will take at least half a day to make a cut, but if the cut is made electric jigsaw, then it will take an order of magnitude less time. A successful tie-in depends on how correct and accurate the markup is. When the cut is made, several self-tapping screws can be screwed into the slot so that the countertop does not bend or break off at the end. In the event that the cutout is made from the inside, then it is recommended to put under it wooden block, this is done so that when the drill exits, there are no chips of plastic.

According to the principle of placement on the underframe, sinks are divided into overhead and built-in. The surface of the sink panel can be located above the plane of the countertop, be flush with it or be below the level of the desktop. In any case, the bowl for the mixer must be installed between the sections of the headset to accommodate dirty dishes and for cooking and serving meals.

The pedestal on which the overhead sink is attached is more often separate element kitchen interior. Mortise and integrated washbasins are mounted in the solid surface of the worktop of the floor units of the sets.

Installing the overhead sink panel

Sink connection diagram: 1 - mixer pipe; 2 - gasket; 3 - fixing nut; 4 - flexible hose; 5 - pipeline supply; 6 - overflow hole; 7 - combined drain; eight - drain device; 9 - compression ring; 10 - compression clutch; 11 - double-turn siphon; 12 - drain pipe.

Overhead types of sinks are mounted easier than others. This is traditional way installation of equipment for washing dishes. In the interior of the kitchen, it is a free-standing cabinet with a sink, complemented by a panel for folding washed kitchen items.

On the pedestal, the panel is fixed with fasteners in the form of brackets or pushed onto the base into the grooves of the pedestal using special slides.

The sink kit may include an adhesive tubular seal inserted into the groove on the panel. The joint between the cabinet and the sink panel is coated with silicone sealant to protect it from moisture penetration.

Rubber seals do not adhere tightly to the mating surfaces and have a short service life. More often they are replaced with a moisture-resistant sealant, it tightly fills the gaps and retains its properties for a long time when dried.

The underframe usually does not have additional internal elements, this opens up access for repairing supply pipelines, cleaning the siphon and sewer pipes. Sometimes supporting bars are attached under the overhead sink, which increase the strength of the structure.

You may be interested in: A few basic rules for installing a sink in a countertop

Before attaching the sink to the countertop, a mixer, water supply hoses and a siphon are mounted. The overhead sink is fixed with L-shaped fasteners with an oblique slot. 4-5 such elements are installed. Self-tapping screws are screwed into the places for fastening marked on the inner surface of the cabinet. They should protrude 5 mm from the walls of the underframe. It is better to screw in the screws with a screwdriver, when using a screwdriver, the countertop may be damaged.

During installation, the fastening grooves are mounted on self-tapping screws and the sink is shifted until it is firmly fixed on the surface sink. Then the screws are tightened and the protruding sealant is removed.

Back to index

Installation of a mortise sink

To prevent splashes from water when washing dishes, choose a deep sink and install a low faucet.

The sink is installed in a pre-cut hole in a solid worktop. In this case, the sink itself can be made of various materials A: stainless alloy, earthenware, porcelain, etc.

To insert a washing tank, you will need some tools and additional materials:

  • electric jigsaw with a fine-toothed file;
  • drill, screwdriver;
  • pencil, ruler, tape measure;
  • self-tapping screws, silicone sealant;
  • wrenches for mounting the mixer;
  • sandpaper, construction knife.

The contours of the installed panel are marked with a pencil, turning it over and laying it on the countertop. The indents from the front and rear edges of the latter take at least 5 cm. Then the location of the bowl is measured relative to the edges of the panel. On them, the contour of the hole cut out under the sink looms.

The bowl can be various shapes, therefore, it is necessary to transfer it as accurately as possible geometric parameters on the surface of the tabletop. Manufacturers of mortise sinks often include a template with the kit, according to which the shape of the hole is drawn.

The cutting line should recede outwards from the sides of the bowl by about 1 cm. A hole is drilled at one of the points of the contour for inserting a jigsaw blade. For a rectangular bowl, holes are drilled at the corners of the intended contour.

You may be interested in: Installation and connection of the washing machine and dishwasher

By outside the contour is glued masking tape. It will protect the surface of the countertop from damage by the foot of the jigsaw when cutting. On a removable tabletop, the material is sawn with a jigsaw from the front side, so the surface lining is less damaged. In the process of cutting the opening, self-tapping screws are screwed into the cut to a small depth in order to inner part did not fall out at work. The sector to be removed can also be fixed from below with a backwater.

The ends of the countertop along the cut are covered with silicone sealant to protect the material from moisture penetration. The sealant is also applied under the edges of the panel along the drawn contour. A sink with a built-in mixer and a siphon is inserted into the prepared opening and attached to the countertop with clamps included in the plumbing kit. It remains to connect the mixer to the water supply and drain the sink through the siphon to the sewer.

Kitchen sinks are divided into built-in and overhead. The surface of the washing panel can be located at the level of the desktop or on the plane of the table top. Mixer bowls must be fixed between sections kitchen set. The curbstone intended for fastening of the laid on sink is a separate element of an interior of kitchen. Integrated mortise sinks are mounted on the surface of the desktop of headsets and floor modules. Overhead sinks are the easiest to mount. They are a cabinet with a sink, which is complemented by a panel for storing kitchen items.

  • The panel is fixed on the pedestal using brackets and slides into the grooves of the pedestal using special slides.
  • The sink may come with an adhesive seal that is inserted into the groove of the panel. This prevents moisture penetration.
  • Rubber seals, as a rule, do not adhere tightly to the butt surfaces, and have a rather short service life. Therefore, it is rational to replace them with a moisture-resistant sealant, which will help fill the gaps and retain its properties when dried.
  • If the underframe does not have internal elements, this allows access to repair pipelines, as well as to clean the siphon and sewer pipes.
  • Supporting bars must be attached under the overhead sink, which will help to significantly increase the strength of the structure.
  • Before attaching the sink to the countertop, a mixer is mounted, and water supply hoses and a siphon are also installed.
  • The overhead sink is fixed with special fasteners, having an L-shape and an overhead slot. For reliable fastening, it is enough to install 5 such elements. Pre-mark on the inside of the cabinet places for fastening self-tapping screws. It is better to screw in the screws with a screwdriver, as using a screwdriver can damage the countertop.
  • The sink bowls can be different, so you need to transfer the geometric parameters of the bowl to the surface of the countertop as accurately as possible. Most often, manufacturers of mortise sinks to kitchen set a special template is attached, according to which it will not be difficult to draw a special shape of the hole.
  • Make a cut line from the sides of the bowl by about 1 centimeter. Mark the contour points, insert a jigsaw and cut a hole to fit the bowl. Do not forget that masking tape must be glued on the outside of the contour to protect the surface of the countertop from damage by the jigsaw foot.
  • When installing a conventional mortise sink, the cut line does not require additional processing. But at the same time, the edge must be perfectly even. This will help in the future to ensure complete tightness of the connection and a decorative appearance.
  • Clean the cut surface. Apply a layer of sealant and install the sink. After the sealant has completely dried, fix the sink with clamps. When planning to install individual elements of the headset in the kitchen, use an underframe with an overhead sink.

All modern sinks, according to the type of placement on the washing underframe, are divided into built-in and overhead. At the same time, the surface of the sink itself can be below the level of the desktop, above the plane of the countertop, or be flush with it. But be that as it may, the bowl under the mixer should be mounted between those parts of the kitchen set that are designed for serving dishes, cooking and placing dirty dishes. The cabinet to which the sink is attached is usually a separate element. kitchen interior. Integrated and recessed washbasins are installed in the solid work surface of the floor units. In this article we will talk about how the sink should be attached to the countertop from below, above or flush, how to properly install similar structures.

Fixtures for modern sinks

Mounting for the sink to the worktop in the case of mortise model should be as reliable as possible so that the sink bowl is well fixed during installation. This version of the mounting hardware greatly simplifies the installation and subsequent disassembly of the sink. We will consider it further.

Fastener features and main purpose

Overhead and mortise sinks have almost replaced other models of kitchen sinks due to their practicality, beauty and ease of use. This type of plumbing is ideal for installation in non-standard modern countertops, which involve maximum integration into the overall interior ensemble of all household appliances. Its main feature is that no traces of fasteners, slots or gaps should remain in the visibility areas and on the surface. So here's to this requirement to implement, you will need reliable hidden fasteners, which can both discreetly and securely hold the sink bowl in the countertop.

Mounting device:

  • The fastener consists of two main elements and a clamping screw.
  • The lower part is attached to special holes or grooves to the sink apron.
  • The upper part cuts into the countertop with special teeth.
  • All elements are connected to each other with a screw.
  • All parts are hinged, the upper part can be bent relative to the lower one at your discretion. It is thanks to this feature that you can first bend the teeth inward, then insert the shell into the hole, and only after that they can be bent again and firmly rest against the board.

Important! Fasteners may consist entirely of metal parts or have plastic inclusions. All-metal clamps are considered the most reliable.

Even if you use an all-metal case, it is recommended to tighten all the screws only by hand, because the threads on the washer are too fragile and can be easily torn off with a screwdriver.

Is it possible to mount without a clamp?

It happens that the fasteners for the kitchen sink are lost during transportation or simply do not fit the specific countertop in size due to its too large thickness. In such situations, it is difficult to find a way out, but still it is real.

There are several options for solving this problem:

  1. Fix the sink with sealant or glue.
  2. Independently make a mount from parts for installing GKL.

Adhesive mount

Given the fact that the sinks are superimposed on top of the hole and rest on the countertop, it can be said with confidence that the entire load falls on the bowl, under the resulting efforts it is pressed even more strongly. But sometimes there is a gap between the board and the sides. So, if you install the sink on the glue and press it with some kind of load for the time of solidification, then the gap will be minimal, and the fixation, in turn, is reliable.

Important! The biggest problem with the adhesive is the impossibility of simple and quick dismantling of the sink in case of repair or replacement of the faucet.

Fastening for GKL

You can use the remote mount and cut it into several parts. The antennae are simply inserted into the mount on the sink, self-tapping screws are inserted through one of the holes at an angle and attracted to the countertop. Due to this, an attractive force arises, the fastening is durable and reliable.

Important! Screws can only be screwed into countertops made of wood. Polymer, composite and stone products are completely unsuitable for this method, only the use of dowels is appropriate here.

Installation of a surface sink

Overhead types of sinks can be called the easiest in terms of installation. This is a traditional installation option for dishwashing equipment. In the interior, such products are freestanding bedside tables, complemented by a panel for folding already clean kitchen utensils.

Installation is as follows:

  • Before attaching the sink, a mixer, a siphon and hoses supplying water are mounted. The overhead structure is fixed with fasteners with an oblique slot. Then, self-tapping screws are screwed into the attachment points, previously marked on the inner surface of the cabinet. This should be done with a screwdriver, while the screws should protrude from the walls of the underframe by 5 mm.
  • The fastening grooves are mounted on self-tapping screws, the sink must be shifted until it is firmly fixed. With the help of mounting brackets, the panel is fixed on the pedestal or pushed into the grooves on the base using special slides. Often in comes with tubular adhesive seal, which is inserted into the groove on the panel.

Important! The hole between the sink and cabinet is coated with sealant to prevent moisture penetration.

  • Support bars are installed under the sink in order to increase the strength of the structure. The underframe itself remains open for cleaning the siphon, drains and repairing pipeline connections.
  • On the last step it is necessary to tighten all the screws, remove the sealant protruding at the joints.

Installing a mortise sink

The sink itself can be made of porcelain, stainless steel or faience. Installing a sink sink begins with cutting holes in the countertop.

To mount such a container, prepare the following materials and tools:

  • Electric jigsaw with a fine-toothed saw.
  • Screwdriver, drill.
  • Ruler, pencil, tape measure.
  • Silicone sealant, self-tapping screws.
  • Spanners.
  • Construction knife, sandpaper.

Mortise structure mounting scheme:

  • Mark the contours of the panel to be mounted with a pencil, to do this, turn it over and lay it on the countertop. Indents from the edges should be at least 5 cm.
  • Measure the location of the bowl in relation to each edge of the panel. You should have an outline of the hole that you cut out under the sink.

Important! It is necessary to transfer the contours of the sink to the surface of the countertop as accurately as possible. The line along which you will cut should recede from the sides outward by 1 cm.

  • Drill a hole at one of the points on the outline to insert a jigsaw blade into it. If the bowl has rectangular shape, then the holes are drilled at the corners of the resulting contour.
  • Stick painter's tape on the outside to protect the surface from damage when sawing. In the process of cutting the required opening, screw in the screws to a small depth so that the inner part does not fall out during operation.
  • Cover the ends of the countertop with sealant strictly along the saw cut to protect the material from moisture penetration. It must be applied along the edges of the panel along the drawn contour.
  • Insert a sink with a built-in siphon and mixer into the finished opening, attach it to the countertop with clamps.
  • Connect the faucet to the water supply, drain to the sewer through a siphon.

Installation of an integrated sink

Now we will look at how to attach the sink to the countertop flush with it in order to make it comfortable to use, to maximize the aesthetic perception of the entire structure.

Important! Installation of mortise sinks does not require high-quality processing of slices, because they are not visible under the panel. In the case of integrated bowls, it is recommended to do this carefully in order to obtain an impeccable result. Only compliance with this condition will ensure maximum tightness of all connections and an unsurpassed decorative look.

The mortise sink fastener is a necessary part for fixing the sink bowl to the countertop during its installation. This type mounting fittings greatly simplifies the process of installation and subsequent dismantling kitchen sinks, and we want to consider it in more detail.

Washbasin fixtures

Purpose and features

Mortise and overhead sinks have practically ousted all others from the market due to their beauty, practicality and ease of use. It is this type of plumbing that is best suited for installation in a modern countertop, which involves the maximum integration of all appliances into the overall interior ensemble of the room.

One of the features of such an installation is that even traces of mounting fittings, gaps, slots and other technological details should not remain on the surface and in the visibility zones. To realize this requirement, a hidden and reliable fastener is needed, which can not only imperceptibly, but also with sufficient effort, pull the sink bowl to the surface of the countertop.

Of course, plumbing manufacturers have taken care of such a device, because the “do it yourself” and “finish with a file” options have long been irrelevant, and modern products should be equipped to the maximum.

Consider the device of the fastener:

  • The product consists of two parts and a clamping screw;
  • The lower part is attached to the sink apron in special grooves or holes;
  • The upper part rests against the countertop, crashing into it with special teeth;
  • The parts are interconnected with a screw, by turning which we can adjust the distance between them. If a Bottom part fixed on the sink, and the top rests against the countertop, then by reducing the distance we will press the sink to the table;
  • The parts are articulated, and top part can bend relative to the bottom. At installation work this feature allows you to first bend the teeth inward, insert the sink into the hole in the countertop, and then bend them again and rest against the board.

The product can consist entirely of metal (tin, stainless steel, galvanized) or have plastic inclusions. All-metal clamps are considered more reliable.

Important!
Even in the case of an all-metal clamp body, the screw should only be tightened by hand, since the thread on the washer is weak and can be easily torn off with a screwdriver.

Installation without clamp

There are situations when fasteners are lost or do not fit the thickness of the countertop. In this case, you can do without them, although this is highly undesirable.

There may be options here:

  1. Use glue or sealant to fix;
  2. Make a mount yourself from parts for mounting GKL.

Since the sinks are superimposed on the hole and rest on the countertop from above, all operational loads and emerging forces tend to press the bowl even more strongly. The only point is the gap between the sides and the board.

If we put the sink on the glue (silicone sealant, epoxy resin etc.) and press the bowl with a load for the time of solidification, then as a result the gap will be minimal, and the fixation will be reliable.

Important!
The main problem of glue is the impossibility of quick and easy dismantling sinks, if necessary, with or other structural details.

You can take a remote mount for GKL profiles and cut it into two parts. We put the antennae into the mount on the sink, and through one of the holes we insert a self-tapping screw and pull it to the countertop at an angle. Thus, an attractive force arises, and the fastening is reliable and durable.

Important!
You can only screw a screw into a wooden countertop.
Composite, polymer and stone products are not suitable for this method, it is possible to mount on a dowel here.

The price of fasteners is very small, so there is no point in reinventing the wheel in this case. It is much easier to buy the right fasteners and save time and effort.

Mounting

Installing fasteners on the sink body and fixing the bowl with your own hands is very simple.

The instruction will be short and clear:

  1. On the shell body we find special grooves or ears for attaching clamps;

Loading...
Top