Thanks to snake_elena for the tip. For those who can't open the video in the post, here's a direct link.
Tags: Do-it-yourself flat cutter for a walk-behind tractor video drawings
A small cultivator that combines a hiller. Unit Description: ...
Fokin's flat cutter, what is it for and whether it needs to be sharpened before work | Topic author: Peter
Michael
To be honest, I bought it a long time ago. first used, then abandoned. never sharpened
Gennady We didn’t sharpen it 3-4 years ago, but we need it and it’s very convenient for weeding, loosening the soil, it’s very convenient to make furrows in the beds and so on, but in no case Denis, but with us it does not replace a shovel, soil we dig with either a shovel or a pitchfork, if you haven’t bought it yet, don’t get caught in CHINESE, you need to choose good metal, but in general it is necessary to sharpen
Ruslan universal tool Eugene: tillage, tedding, weeding, loosening, etc.
Surface tillage provides more favorable living conditions than digging.
Vladislav is a tool for lazy people and loafers, but the meaning, and the price have sunk ...
Alexander My neighbor does not part with him even for a minute at the dacha, but I will not adapt to him in any way.
Andrey type in the search engine "Fokin's flat cut video" and you will find ways to work with it. Have a good harvest.
Vyacheslav I don't like the flat handle. I bought it a long time ago at the exhibition and did not get used to it.
Viktor It is very convenient to weed and loosen. I immediately make furrows in width such that they pass between the rows, but it is necessary to sharpen, like any tool. They sent me spicy, ordered from the Fokins 8Vladimir 4-13-63, Vladimir region. Good luck!
Maxim I have been using Fokin's flat cutter for 8 years - I am very satisfied. We sharpen very rarely.
Kirill has been with us since 89.
there was an early article in the "gardener" and detailed drawing. My father made and still use it, made 2 sizes, the handle is round.
basically weeding in the garden, quite convenient as dense plantings), well, loosening. , grooves for crops, it .. everything that is done by glanders
well, the rest mm. . a shovel is a shovel.
Egor Lady flat cutter
I specially made a light hand-held flat cutter for weeding between rows in the garden for my wife. Its design is simple: a narrow chopper blade is riveted to a curved bar.
flat cutter diagram
For the cutting part of the flat cutter, I used spring steel. Motorists know that the suspension torsion bar of the ZAZ 969 model is a type-setting bar about 0.7 m long, welded from spring steel plates. The cross section of each plate is 3.5x20 mm. Moreover, the properties of spring steel are such that it can be welded by conventional electric arc welding to others. metal parts. And at the same time, this material is very durable.
First, with the help of a grinder, I cut off a blank for a blade 130 mm long, then -
a piece of metal bar for attaching a blade with a diameter of 12 mm and a length of 200 mm and a piece of pipe with a diameter of 28 mm for attaching a handle. To give the bar a curved shape, I cut a groove 8 mm deep in its front part perpendicular to the plane of the bend.
I inserted the blade blank into the groove and welded it on both sides in semicircles
bar. In the handle attachment tube, on one side, I cut out a compensation groove, on the other, a small sector for the convenience of crimping the tube along the bar when attaching the blade. Then I carefully welded everything, trying not to warp the geometry of the tool and not burn through fine details.
Clamped in a vice almost ready product and sharpened the blade with a grinder. Drilled two holes for mounting screws, painted and installed wooden handle.
plane cutter
However, when testing a new tool, the wife complained that the angle of inclination
the cutter to the soil is chosen incorrectly, and does not allow you to easily cut the roots of weeds. Therefore, I had to empirically select the optimal position of the blade. For this, the hump on the bar was bent or straightened. As a result, he achieved that the flat-cutter knife, with minimal effort, penetrates into the soil up to 3 cm and easily “leaves” it with a slight adjusting inclination of the arms and body.
Now the wife special efforts with the help of this lady's tool, it gets rid of weeds in the aisles in the garden and between the tiles of the path, and also loosens the soil in flower beds and around young shrubs.
Stanislav It is necessary to sharpen.
The thing is comfortable
and in some places, simply irreplaceable.
I don't see anything wrong with
what you can try to make the work of a gardener easier
Ivan, who considers a flat cutter to be a tool of lazy people).
He himself does not "run" around the site, you need to work hard too)
But until you try it yourself, you will not understand)
I was skeptical for a long time.
I tried it, I like it.
My relatives, people of traditional views,
have not adapted.
So everything is individual.
Try it, you will know for sure)
Pavel) This year I got it, I couldn’t get used to it for a long time, now it’s an indispensable thing, especially in removing weeds, honey beds. Never sharpened
Fedor I have a flat cutter for 5 years and often have to sharpen, because the soil at the 2nd dacha I bought is clayey, not cultivated.
Oleg The FOKINA flat cutter serves for cultivating the earth, like a chopper, it does not need to be sharpened; it must be made of self-hardening steel, the teeth of excavator buckets and railway switches are made of such steel.
Do-it-yourself flat cutter: video, photo - RozaRii.ru
For example, the flat cutter Strizh, which you can see in the photo, ... many works use a flat cutter for a walk-behind tractor, as shown in the video. ... We attach a drawing of the tool and mark on the iron those places where ...
Ploskorez-weeder for walk-behind tractor buy at a bargain price...
Flat-cutter-weeder with replaceable knives for a walk-behind tractor price, characteristics, ... do-it-yourself video Potato digger for a walk-behind tractor video ...
Today, the market for equipment for agronomists has replenished with many new very convenient devices. It's no secret that the "palm" in the competition of the best of the best belongs to walk-behind tractors, which are "universal soldiers" and are perfect for almost any task.
Naturally, such versatility of these units opens up thanks to the many units of attachments that allow you to both remove snow and plow the land. A flat cutter with a ripper for a walk-behind tractor is one of the most famous and common devices, so we will pay maximum attention to it today.
Flat cutters for walk-behind tractors: what are the advantages of the part?
The flat cutter is often considered as a useful object, because it is a symbiosis of a harrow and a knife. The blades are positioned parallel to the ground surface or at a slight angle to cut weeds under top layer earth.
At the same time, the device does not turn over the soil, contributing to the maximum conservation of moisture and useful substances. It is worth noting that the unit is known not only for the high-quality performance of this function. flat cutter:
- contributes to the improvement of soil structure;
- prepares the soil for planting plants and seeds;
- creates conditions for saturating the earth with oxygen;
- carries out inter-row processing of crops;
- breaks down the crust that often forms after heavy rain.
Many owners consider the need to purchase or create models of various sizes as the only disadvantage of flat cutters, because different cultures have different spacings.
Despite the fact that today it is not so difficult to purchase a factory flat cutter for a walk-behind tractor, many still try to create such a device with their own hands, and they do it quite well. Let's get acquainted with one of the lessons in more detail.
Learning to create a flat cutter for a walk-behind tractor with our own hands
as the most accessible and simple method you can consider the following maneuver: you need to measure a certain length of a long steel plate and sharpen it, thereby creating knife blades. Tools for manual use are often sharpened on both sides, but flat cutters on a walk-behind tractor do not need this. AT this case only one-sided processing will suffice.
The sharpened plate must be attached to the brackets (bearing) attached to the hitch of the walk-behind tractor. So that the resulting plate does not sink too deep into the soil, special limiters are used.
For this task, ordinary wheels from toy cars are suitable, the main thing is to choose right size. Moreover, in order for these wheels not to break during the first operation, it is necessary to fill them with metal bushings in order to increase the level of durability. The resulting parts must be placed from below so that the tool blade sinks into the ground no deeper than 5 cm.
An important point: if there was no metal plate at hand, you can use the canvas segment mower, after dividing it into 2 parts. But without fixing the resulting segments, you cannot proceed, otherwise the product will “run” from side to side and create discomfort for the operator.
In order for the immersion process to occur without much effort, it is advisable to weld a heavy part on top. After completing all the operations, you need to take care of the hitch, which will become the connecting link with the body. For this, it is necessary to inside attach the bearing to the axis, on which the plate will be placed, which is the “base” for further screwing the homemade flat cutter.
For the purpose of a more detailed acquaintance with the specifics of the object, we present to your attention special drawings: 
If a person wants to get an explanation of all controversial points, he can watch a video of the process itself and a demonstration of finished products.
flat cutter mounted cultivator for a walk-behind tractor with your own hands (+ drawing)
How to do mounted flat cutter do-it-yourself cultivator for a walk-behind tractor
It's good to have a house in the countryside.
You dig and you dig everything free time in the garden, in the soil. Something turns out, but even more I want to plant, grow with my own hands. And how amazing these plants are: you approach them with kindness and soul, and they immediately respond to this. And everything would be fine if not for the weeds. Fighting them can drive an unprepared person crazy. But you need to do it anyway. The question is exactly how.
Long and difficult. Flat cutter? There are doubts.
And so, on the basis of trial and error (or, more simply, by typing), I approached the creation of a universal flat-cultivator, on which you can easily and naturally install various devices for cultivating the land.
To do this, you only need to release four bolts with a diameter of 10 mm using a 17 × 19 wrench, remove the nozzle, put another one and tighten the bolts again (in fact, the whole structure is perfectly visible in the figure). Previously, of course, each such interchangeable nozzle must be set to the desired height or depth.
To create a universal flat cutter, materials were used that can be found in any barn. For example, the spokes in the wheels can be reinforced with nails or wire with a diameter of 6 mm (all the same, working in the ground requires a certain margin of safety for all parts). And the forks for the same wheels (by the way, I took them from an old baby carriage) can be made by ourselves from a pipe with a diameter of 15 cm or a pipe with a square section of 20 × 20 cm.
But the steering wheel is used from an adult bicycle, but you can easily make it from a pipe, if that.
It is mounted on the cultivator in such a way that it can be easily adjusted using two bolts with a diameter of 6 mm. I constructed a plow for planting potatoes, hilling and weeding between rows from the boom of an ordinary cultivator, to which I welded the sidewalls. The angle of the rack in it was made at 90 ° in relation to the ground.
And again, you can make such a plow yourself if you wish. Moreover, in combination with a device called a “digger”, it helps out a lot when digging potatoes.
To do this, put a hitch on two wheels
x and is regulated by the width of the two furrows (approximately from 65 to 70 cm). I dig potatoes through the row. It is more convenient to choose it after that. Yes, and before planting potatoes, I use my universal device to loosen the ground.
I also have a device for trimming mustaches on beds with strawberries: vertical stripes to the bottom are sharpened under a knife on both sides.
They are adjustable in row width and are used in tandem with a hitch. After that, I put one wheel and a narrow rake on the cultivator: the aisles are loosened, and the mustache growth is removed. For the same work, you can use rollers with a flat cutter.
For cutting furrows in the beds, I use a device where the row spacing is freely adjustable. On my station wagon, you can install any rollers and flat cutters of various widths, as well as a rake. This machine justifies itself, and even very much so. It is quite simple in manufacturing: a little bit of skills, a grinder, welding and improvised material, metal.
I think many will be interested in my proposal. It is a pity that there is no camera, I had to draw.
I will add: the angle of the weeder itself is the most obtuse.
The grip width for any bed is from 15 to 40 cm. The steel strip is thick (spring from the old Moskvich) plus the steering column torsion bar from the Zaporozhets. Welded at a slight angle with respect to the ground. It is sharpened with a grinder from the top side, front and back. That's all.
I made this technique for my brother and neighbor. A friend of mine has already assembled it himself according to my drawing: they say that the neighbors went to him all day to look at this miracle.
In general, the owners of the station wagon are in seventh heaven with happiness. They unanimously say that half a life without such a unit has been lived on earth in vain. The garden is being weeded very quickly! Therefore, I propose. Anyone who is interested and makes such a station wagon will thank himself. Well, dear summer residents, good luck in the garden!
Loads and weights for walk-behind tractors Grousers for walk-behind tractors Woodworking attachments for walk-behind tractors Branch shredders for walk-behind tractors Potato diggers for walk-behind tractors Potato planters for walk-behind tractors Mowers for walk-behind tractors Shovels and mouldboards for walk-behind tractors Pumps and pumps for walk-behind tractors Hillers for walk-behind tractors Adapters for attachments Plows for walk-behind tractors for motoblocks Couplings for motoblocks Carts and trailers for motoblocks Axle extensions for motoblocks Milling cutters for motoblocks Brushes for motoblocks"); if (arAjaxPageData.TITLE) BX.ajax.UpdatePageTitle(arAjaxPageData.TITLE); ) BX.ajax.UpdateWindowTitle(arAjaxPageData.WINDOW_TITLE || arAjaxPageData.TITLE); if (arAjaxPageData.NAV_CHAIN) BX.ajax.UpdatePageNavChain(arAjaxPageData.NAV_CHAIN); )); (function (w, d, nv, ls) ( var lwait = function (w, on, trf, dly, ma, orf, osf) (var pfx = "ctawait", sfx = "_completed";if (!w) (var ci = clearInterval, si = setInterval, st = setTimeout, cmld = function() (if (!w) ( w = true;if ((w && (w.timer))) ( ci(w .timer);w = null;)orf(w);));if (!w || !osf) (if (trf(w))(cmld();) else (if (!w) (w = (timer: si(function () (if (trf(w) || ma 0 && !!cnt && cnt.get ? cnt.get("clientId") : null;) catch (e) (console.warn("Unable to get clientId, Error: " + e.message);)ct(w, d, "script ", clId, n);), function (f) (w[o](function () (f(w[o]);))));) else (ct(w, d, "script", null , n);)); var cid = function () (try (var m1 = d.cookie.match("(?:^|;)\s_ga=([^;])");if (!(m1 && m1.length > 1)) return null;var m2 = decodeURIComponent(m1).match(/(\d+.\d+)$/);if (!(m2 && m2.length > 1)) return null;return m2) catch (err) ())(); if (cid === null && !!w.GoogleAnalyticsObject) ( if (w.GoogleAnalyticsObject == "ga_ckpr") w.ct_ga = "ga"; else w.ct_ga = w.GoogleAnalyticsObject;if (typeof Promise !== "undefined" && Promise.toString().indexOf("") !== -1) ( new Promise(function (resolve) (var db, on = function () (resolve(true)), off = function () (resolve(false)), tryls = function tryls() (try (ls && ls.length ? off() : (ls.x = 1, ls.removeItem(" x"), off());) c catch (e) (nv.cookieEnabled ? on() : off();)); w.webkitRequestFileSystem ? webkitRequestFileSystem(0, 0, off, on) : "MozAppearance" in d.documentElement.style ? (db = indexedDB.open("test"), db.onerror = on, db.onsuccess = off) : /constructor/i.test(w.HTMLElement) ? tryls() : !w.indexedDB && (w.PointerEvent || w. MSPointerEvent) ? on() : off();)).then(function (pm) ( if (pm) (gaid(w, d, w.ct_ga, ct, 2);) else (gaid(w, d, w.ct_ga , ct, 3);)))) else (gaid(w, d, w.ct_ga, ct, 4);) ) else (ct(w, d, "script", cid, 1);))) ( window, document, navigator, localStorage); var jsControl = new JCTitleSearch2(( //"WAIT_IMAGE": "/bitrix/themes/.default/images/wait.gif", "AJAX_PAGE" : "/products/ploskorez_propolnik_dlya_motoblokov/", "CONTAINER_ID": "title-search" , "INPUT_ID": "title-search-input", "MIN_QUERY_LEN": 2 )); function jsPriceFormat(_number)( BX.Currency.setCurrencyFormat("RUB", ("CURRENCY":"RUB","LID":"ru","FORMAT_STRING":"# RUB","FULL_NAME":"RUB" ,"DEC_POINT":".","THOUSANDS_SEP":" ","DECIMALS":"0","THOUSANDS_VARIANT":"S","HIDE_ZERO":"Y","CREATED_BY":"","DATE_CREATE" :"2016-12-28 10:45:07","MODIFIED_BY":"11","TIMESTAMP_X":"2018-09-05 14:51:00")); return BX.Currency.currencyFormat(_number, "RUB", true); ) var arBasketAspro = ("BASKET":,"DELAY":,"SUBSCRIBE":,"NOT_AVAILABLE":,"COMPARE":); $(document).ready(function()( setBasketStatusBtn(); ));
Loading...