Temperature is one of essential conditions stable and long-term operation of the computer.
To date, there are a huge number of programs for measuring the temperature of a computer, they allow you to receive real-time information about the state of the temperature of almost all nodes of the system unit.
Overheating symptoms.
When the processor overheats, the computer starts to turn off spontaneously, suddenly restarts, starts to slow down, freeze, slow down, during any action this symptom is especially noticeable in games. If, after turning on the power of the computer, a message appears like: Warning: Your computer CPU fan fail or speed too lowYou can also disable this warning message in SETUP, then this is a problem with the cooler, perhaps it is clogged with dust or something got there.
CPU.
And so we check the temperature of the processor using the programs described below. The processor temperature in idle mode should be about 40 - 45 degrees. At heavy loads modern games the temperature should not exceed 70 degrees. However, for some processors, the temperature value may differ; I advise you to find out the operating temperature of your processor in the search.
If the temperature of the processor is above normal, then the cooler may be clogged with dust or the thermal paste has dried on the radiator. The cooler may also be faulty or it is required to install a more efficient cooling system, you can also install an additional cooler to remove heat from the system unit case.
video card
The temperature of the video card when idle should be about 40 degrees with a load of up to 80 degrees, some gaming video cards can warm up to 90 degrees.
If the video card overheats, then the ways to eliminate overheating are absolutely the same as in the case of the processor, Replace the thermal paste and clean it from dust.
HDD
On a computer, the hard drive should not exceed 40 degrees; if it is a laptop, then no more than 50 degrees.
Programs for measuring the temperature of the processor.
1.Speccy- will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard disks, Optical drives, Audio support. Additionally, the program adds the temperature of your various components.
2.SpeedFan- A small application with which you can control the rotation speed and temperature of the fans in the computer system unit.
3.HWMonitor- the program is designed to monitor the performance of various computer components. This includes temperatures, fan speeds, and voltages.
- a popular program for reviewing and diagnosing all components of a computer. AIDA64 will give you detailed information about the composition of the computer: hardware, programs, temperature, operating system, network and connected devices.
5.EVEREST Ultimate Edition - An application designed for testing and diagnosing hardware on a computer.
There are very often questions on the Internet: why does the computer restart on its own, in connection with which the device freezes and turns off urgently, what to do if the monitor does not work stably.
The first thing you think about is the presence of viruses, but in most cases the problem is overheating of the processor or video card. In this article, we will look at practical and easy-to-use software tools for displaying temperature readings.
Why you need to know the temperature of hardware parts
The temperature of the processor or video card in working condition is constantly changing. Overheating can cause your computer or laptop to shut down suddenly, resulting in data loss. So if you want to avoid critical temperatures and to prevent damage to the equipment, it is necessary to use special software tools. With their help, you can monitor the temperature indicators of the heating of the processor, video card, hard drive at the time of their work.
Basic tools
You can check the temperature by going into the BIOS. To do this, you need to restart operating system, while turning on the computer, press the "F2" or "Delete" key, depending on the version of the device. After entering the BIOS, you need to find the "H / W Monitor" section and select it. After that, the temperature readings of the hardware components will be displayed.
The main disadvantage is that there is no way to see the temperature while the computer is running and its load. Therefore, further we will consider the most useful software products.
HWMonitor
"HWMonitor" is a program for monitoring the temperature of the processor and video card. It also lets you know the fan speed and voltage data. This program can be downloaded from the official website.
- After starting the application, all the main devices will be displayed: processor, HDD, integrated and discrete video cards, laptop battery.
- Having opened all the processor points, the current maximum and minimum values temperatures collected during PC operation. The processor includes such items: voltage, temperature, degree of workload, as well as its frequency.
- About the hard disk, only its temperature is indicated.
- Next come the integrated and discrete graphics cards. The program shows the temperature and frequency for the integrated one, in the discrete one, instead of the frequency, the workload is displayed.
- The battery item is indicated only for a laptop, it displays the consumed voltage, power and battery wear levels.
AIDA 64 Extreme Edition
"AIDA 64 Extreme Edition" is an extensive set of diagnostics and testing of computer hardware components. The program has many features:
- real-time monitoring of hardware and system components of a computer;
- testing of computer hardware;
- diagnostics of components for problems and errors;
- analysis of the system and application programs;
- temperature, voltage and fan monitoring.
It should be noted that the program is paid. Its trial version is limited to 30 days of use - this is the main drawback.
This utility can be downloaded from the official site, let's consider where to find the computer temperature indicators:
- After installing the program, launch it by double-clicking on the shortcut.
- In the window that opens, double-click on the "Computer" item and select the "Sensors" item in the list that opens.
- Will open detailed information about all computer components equipped with a temperature sensor, including the main ones: "CPU" (Central Processing Unit) and "GPU" (Video Card).
MSI Afterburner
MSI AfterBurner is a multifunctional utility that is aimed at monitoring the performance of a video card. It is often used by gamers to overclock a graphics card and to control its following indicators:
- increasing the clock frequency of the memory;
- cooler rotation adjustment;
- FPS monitoring (a number indicating how many times per second the graphics processor updates the image);
- notification of an increase in critical temperature values.
You can download this program from the developers website at this link. Consider the main parameters of the program:
What to do if the temperature rises?
The normal temperature during the operation of the processor is considered to be up to 60 degrees, the video card - up to 80 degrees.
If you find the problem of overheating devices, then consider the primary solutions:
- First of all, turn off your computer or close the program that is causing the overheating.
- It is necessary to ensure good blowing of coolers, clean the computer completely from dust.
- Temperature drop environment. Often heat room affects the temperature of the hardware parts of the computer. To get out of this situation, you can use the air conditioner or fan.
- Installation of a more powerful cooling system. Installing additional coolers for the processor and video card will solve the problem. You can also use stands under the device with a cooling system.
But the safest the right advice will take the computer to the service for complete diagnosis and further repair or cleaning. This is where the review of the tools ends, if you know more convenient and high-quality software solutions, write in the comments.
29.07.2011
Hot summer weather is a test for your computer. One of the reasons for strange errors, freezes, reboots may be overheating of the computer. If you do not attach importance to this in time, you risk becoming a client of the service center.
One of the "seasonal" malfunctions is overheating of the computer. For normal operation, computer components require a certain temperature regime. During operation, they emit a certain amount of heat, and taking into account elevated temperature indoors in the summer, the temperature of the components becomes an order of magnitude higher. If you are also overclocking your computer and have insufficient cooling or have not looked into the system unit for a long time and everything is clogged with dust, then the probability of overheating of the computer increases.
Overheating of the computer is fraught with unstable operation of the computer as a whole, frequent reboots, freezes, and in some cases can lead to physical damage to the computer components. Therefore, it is so important to “keep your finger on the pulse” and prevent overheating. Having noticed the problem in time, you can eliminate the causes of its occurrence - clean or replace the standard cooling system with a more efficient one, change the thermal paste on the processor, etc.
In this article, we offer you short review the most popular programs for monitoring the temperature of PC components.
Core Temp
www.alcpu.com/CoreTemp
This utility is compact and not demanding on resources. Supports a wide range of processor models from both Intel and AMD. It is displayed in the system tray; when overheated, it displays a corresponding message. A special desktop gadget is also available for download.
speedfan
www.almico.com/speedfan.php
The popularity of this program is due not only to the fact that it is one of the very first programs of this type, but also to the presence of wide functionality in it. Temperature control is just one of the options available. SpeedFan reads voltages, frequency, fan speed, SMART data, hard drive temperature. The values of the desired sensors can be displayed in the tray. The program draws graphs, writes log files, etc.
The program is also popular for its ability to adjust the fan speed to lower the processor temperature.
Real Temp
www.techpowerup.com/realtemp
Real Temp does not require installation, but only understands Intel processors(Core, Dual Core, Quad Core and Core i7). According to the developers, the program gives the most real data, because. temperature reading is performed directly from the sensor located in the processor core. Real Temp can turn off the computer when it overheats. It can also be used to test the temperature sensor and processor speed.
hmonitor
www.hmonitor.net
Hmonitor monitors the temperature of the processor cores, the temperature of the hard drive, voltages, fan speeds. Very convenient in terms of displaying values and actions in case of overheating ( sound signal, shutting down the PC, and even sending emails to the administrator).
PC-Wizard
www.cpuid.com/softwares/pc-wizard.html
This is already a whole complex, with which you can not only monitor the current values, but also test equipment.
Open Hardware Monitor
openhardwaremonitor.org
Open Hardware Monitor is available for both Windows and Linux. Is an software open source (open source software). Displays not only standard temperature sensors, fan speed, voltage, load and processor frequency, but also SMART hard drives and video adapter sensors. Understands Intel and AMD processors.
Temp Taskbar for Windows 7
anonymous-thing.deviantart.com
Designed solely to display CPU temperature, however, the way it does this is unusual. The temperature indicator is the Windows taskbar, which is painted in different colors.
no commentsVery often, users forget about the heating of computer components, which overheat during its operation, the computer starts to malfunction and eventually breaks down. This is most often due to accumulated dust in the system unit, clogging of coolers with dust, an outdated cooling system, etc...
Good evening, dear friends, acquaintances and other personalities. From the title of the article, you probably already guessed that we will talk about the heating of computer components, what it should be and how to measure it. Each electronic device tends to heat up during its operation, but still there are certain norms within which this component can work normally and for a long time.
Well, another sign of overheating of the computer is, of course, our hot summer. The increase in air temperature has jumped noticeably, not only for people, but also for our computers, which are already in constant heating ( at work, respectively.), and then the sun outside the window fries unbearably. As a result of overheating of the components ( cpu, power supply, graphics card...) the computer starts to malfunction in the form of periodic reboots, shutdowns, or it may even burn out.
Program for measuring the temperature of computer components HWMonitor:
This utility is simple and easy to use, does not require installation and other various gestures. The utility can be downloaded from this link. Unzip the archive to any convenient location on your computer, then run the file with the extension .exe according to your system bit depth.
Program for English language, which for some users will make it inconvenient to use, but I think its meaning is not necessary, everything is extremely simple and clear. HWMonitor will measure various computer components, measure the voltage ( video card, power supply, processor, hard drives...) will determine the speed of rotation of the fans, in general, everything you need ...
A program for measuring the temperature of computer components during AIDA64 operation:
You can download the program from the Internet, or here this link. This program in Russian and does not require installation, you only need to unpack the archive and run the file aida.exe.
In the main window of the program, go to the "Computer", "Sensors" section. Here is all the information about the temperature of all components of your computer.
What temperatures can we observe using the AIDA64 program:
- CPU temperature ( CPU), as well as processor cores;
- Video cards ( GPU);
- Video card memory temperature ( GPU);
- Motherboard ( main board in computer), to be more precise, the temperature of its chipset;
These are the main components that must be monitored in order to avoid overheating, especially on very hot summer days.
What temperatures are critical:
Loading...