Replace tiles in the bathroom with your own hands. How to replace tiles in the bathroom: budget and exclusive alternative finishes. Complete seam replacement

Replacing tiles entails a major overhaul of the entire bathroom.

But designers offer more acceptable options on how to cosmetically update the old tiles so as not to disturb the comfort, cleanliness in the house and the family's financial balance.

Seam update

The beauty of the seams is just as important as the spectacular tile. Constant wiping of the joints with special chemical cleaners that kill germs and renew the surface, as well as good ventilation of the bathroom, will get rid of mold between the tiles.

Rules for cleaning damaged seams

Chips often form in the seams, from which a new grout will save. It is she who will radically not only update the seams, but also improve the overall appearance of the tile.

Seam cleaning procedure:

with a spatula, completely remove the old grout;

fill the resulting recesses with a new grout;

after lightly drying the grout, carefully remove its excess with a damp cloth.

Complete seam replacement

to do this, you need to remove all the old grout;
if necessary, use a means to soften it. After applying it, after 2 or 3 minutes, the old grout will become soft, just like toothpaste;
then apply a new grout, according to the instructions attached to it.

The external effect after such a light cosmetic work, as from a major overhaul. Therefore, it is better to carefully replace the grout than an expensive one.

Designers propose to apply a trendy colored grout that will present the bathroom walls in a new way, changing it beyond recognition, but without much labor and money.

And as an option, they offer dark grout to light tiles and vice versa.

Partial replacement of tiles

Faded or broken tiles should be replaced. In order not to damage the quality neighboring tiles, do not immediately knock out the damaged ones with a chisel.

Gentle removal of unnecessary tiles

first, completely clean the seams around it with a special scraper;

then with a concrete drill we will make several holes in the central part of the tile;
now carefully remove this middle of the tile with a chisel,

after that, you can safely knock out the rest with a chisel from the center to the edge;
in the vacated place, carefully remove the remnants of the old grout and glue.

Replacing individual tiles

A new one must be tried on so that it is at the same level and in accordance with other tiles;
then we apply special glue to the new tile;

install it in a prepared place;
fix the new glued tile with special crosses;
check if the new tile stands out against the background of its old neighbors in height;
after the glue dries, remove the crosses;
carefully close the seams with grout;

after drying it with a damp cloth, carefully remove the excess.

Changing the design of tiles

There are two easy ways to cosmetically update bathroom tiles: with vinyl decals or high quality paint.

Waterproof Vinyl stickers of various colors and shapes will effectively turn boring tiles into a fashionable attribute, and even completely change the style. The widest range of such stickers in ordinary stores and on the Internet will fully satisfy even very demanding customers.

Their subsequent replacement is also not difficult - you can change the design whenever you want! The main condition for success is gluing on a perfectly clean, fat-free surface.

Drawing patterns on tiles with paint

This more durable and creative way to solve the issue, how to update the old tile, has several options and its own specific order:

Choosing a pattern for an old tile. The fashionable geometric pattern is the easiest to come by: beautiful multi-colored strokes, squares or rhombuses look modern and fit into the prestigious design of the bathroom.
Marking up the future drawing with a pencil and a ruler.
Cutting with a craft knife corresponding to the pattern of strips of insulating tape. For example, to get a square on a 10x10 cm tile, cut 4 strips of 10 cm each and 4 strips of 5 cm each.
Insulating tape sticker on tiles so that the desired pattern is obtained along the edges and in the middle of it, in this case a square. We place the squares at a level of 10 cm from each other. Paste the joints with long pieces of insulating tape. At the same time, you should not fuss: in case of an error, the tape is easily re-glued,
Primer of the resulting patterns: gently with a small brush, sponge where the drawing will be later.

Primary coloring of a pattern in 3 hours after a primer. But do not speed up the drying process with a hair dryer or fans: dust and motes will spoil the smooth surface, and dirt will always accumulate in these places.
Secondary painting is necessary if the tile is darker than the paint.
Removal of the insulating tape is possible only after a day.

If necessary, you can correct the drawing in some places with a thin brush or scrape off noticeable excess paint with a blade. For the next 24 hours, water must not be allowed to enter the painting, and it is also better to avoid humidity in the bathroom during this time.

Note!

Epoxy paint will retain color for more than 10 years even with regular and most thorough washing with any cleaning products that do not contain abrasive additives.

It is much easier to decorate a tile with an ornament using a stencil. You can buy it or make it yourself from cardboard, but it is better from an unnecessary plastic folder. For painting, you can use a spray of automotive paint from spray cans: it has a strong grip and does not require pre-priming.

For original spraying in the form of dew drops or sea water, dots - stars, you can use glass paint, which also has good adhesion even without a primer. Special paints for tiles, matte and glossy epoxy paints are also durable and moisture resistant. But before painting, it is necessary to perfectly clean the surface to be treated from grease and dust.

With a thin brush, floral ornaments are easily applied by hand, even if not in 1 day, but the result is worth it. It is impossible to distinguish such an exclusive tile from an expensive designer one.

Another option for updating an old tile is a three-dimensional decor with a variety of improvised means, which is not difficult to implement on your own. All kinds of beads, small shells and a variety of pebbles will come to the rescue. These decorative elements must be glued to the tile, having previously thought out what the future pattern will be. They must be small so as not to fall off. Raised elements are difficult to clean, so the best option would be to place a three-dimensional decorative image in places that are less accessible to contamination.

Full color tile

How to update a tile if it is firmly held, but it looks depressing, and there is no desire to glue a new one because of repair dirt and money costs: it can be completely painted with special paints. This is the simplest, simplest, but also the most extreme, unpopular and unaesthetic way of renovation used in summer cottages, in rented apartments.

For a high-quality restoration, you first need to prepare the surface well so that the paint does not peel off after a month or two.

Basic rules for continuous painting of tiles

Preparing old tiles for painting:

we will remove dirt from it with good detergents, but do not leave them on the surface;
degrease the surface with acetone, vinegar or an alcohol solution;
sand the tile with fine sandpaper to remove the gloss, providing the paint with strong adhesion - adhesion to the surface.

Surface treatment with an epoxy primer for stronger adhesion of the paint to the surface - it will dry only after a day.

Re-sanding with sandpaper. In this case, the paint will penetrate deeper, and therefore last longer.

Coating tiles with tile paints, but you can also use epoxy paint:

apply paint with a roller evenly;
give 12 hours to dry;
we paint the tile with a second layer, and if the color of the tile was much darker than the new one, then we paint it a third time, but only after 12 hours.

Complete drying of the paint will come only after 3 days. That's when it is necessary to arrange and hang everything in its place: both furniture and accessories.

Required to update tiles

Dust mask, goggles, gloves
Skin #100
Acetone, vinegar or alcohol solution
Roulette
dummy knife
Level
Automotive, glass or epoxy paint
Regular and sponge brushes
Epoxy primer
Masking tape or insulating tape
Detergent Comet or Cif.

Overlapping tiles with other material

Putty mass on the primer will make the bathroom spectacular "marble". Subsequent sanding and painting with colored and then clear varnish will make the new coating durable.

Silicone sealant will help repair even hopeless places.
It is better to lay out the washbasin and bath area with Premium class ceramics, followed by its strong gluing and even screwing.
Any waterproof material (for example, plastic) can effectively drape the damaged area and enjoy the new bathroom.

A successful solution to the problem of how to update the tile will be backed up by self-confidence and the desire to quickly create coziness.

Until quite recently, ceramic tiles were considered the best approach to choosing a finishing material for bathrooms, and such projects were used by almost all designers without exception.

Many people still keep the old tiles in the bathrooms safe and sound: for a very long time this material was considered the standard for finishing these rooms. Bathrooms, all the walls of which were tiled, were something similar to operating rooms in hospitals, and if such decoration frightened the owners with something, then at least the wall near the sink should have been tiled.

Thinking about how you can replace the tiles in the bathroom is quite difficult, because it closes the walls from the water splashing in the shower and it is very easy to clean it from the soot that appears during cooking. Until quite recently, it was impossible to come up with anything more convenient and practical, so consumers did not think too much about which alternative to tiles in the bathroom could get the right to exist.

Manufacturers at that time produced tiles in a huge range and in the same huge quantity, since there was a constant demand for this product. Gradually, even special sets appeared, which, along with tiles, included borders designed in the same style as tiles, as well as various accessories to create a comfortable and cozy environment.

Nowadays, no one is considering tiles as the only finishing option, since there are already several options for replacing it, which are quite suitable for rooms with an excess of humidity. Designers planning new solutions for kitchens and bathrooms are well aware of what can be used instead of tiles in the bathroom.

Many people already know that although tile was considered the best material for wall decoration, it was perhaps the most expensive of them. Modern materials differ not only in that they are much cheaper, but also in that it is quite possible to make repairs using them on their own, without inviting professional craftsmen. Most often, tiles are replaced with vinyl siding or plastic panels, since these materials are by far the cheapest. The walls do not need to be leveled before finishing with these materials, and their installation is so simple that it can be done even by a completely inexperienced craftsman.

When choosing panels for the bathroom, you should remember that they must be moisture resistant. Modern siding has only a few color options, and panels allow you to create a much more original interior, as they can be decorated with a variety of patterns.

PVC panels in the bathroom

Before replacing the tiles on the panel, you should carefully measure the dimensions of the room, especially if we are talking about a room with a small area. The panel installation technology provides for a shift of each wall by 5 cm, since specially designed profiles are used to fix the coating. Sometimes the panels are mounted not on the profile, but on wooden bars, then the shift can be reduced to 2 cm.

In very small bathrooms, the tiles are removed, while treating the walls with an antibacterial composition to prevent the occurrence of mold fungi. The joints of the panels will need to be carefully treated with sealant. If the panels are mounted in accordance with all the rules, they will perfectly protect the walls from moisture, and the huge range of colors and patterns presented in modern stores will make it easy to choose the right panels for any interior.

Use of wallpaper and other materials

If you plan to paste over the walls in the bathroom with waterproof wallpaper, then the walls will need to be carefully prepared for this: remove the old tiles, level and treat with a special antibacterial compound. Glue the wallpaper on the dried surface of the walls, using waterproof glue for this.

Liquid wallpaper in the bathroom

Liquid wallpaper, which has moisture-resistant elements in its composition, is also very popular in our time. These wallpapers are applied to the walls with a plastic spatula, as a result of which they form a unique texture as a result. Modern stores sell liquid wallpaper in a variety of colors, and if desired, they can be additionally painted with waterproof paint.

Liquid wallpaper in the bathroom

The walls finished with the original bark beetle plaster, in which large particles are interspersed, look very nice. The finished walls look like an old tree that has been eaten away by bugs. Before applying this plaster, the old tiles are removed from the walls, and then they are treated with an anti-fungal and mold remedy. After plastering, the walls can be painted with waterproof paint.

Decorative plaster in the bathroom

Simply painting the walls in the bathroom was not accepted before, since there were no paints on the market other than oil paints. Nowadays, there are latex paints of various colors. Before painting, the surface of the walls is treated with a primer for vapor barrier, and the paint itself is applied in several layers. The composition of this paint is completely safe, and it is odorless and waterproof.

However, you should be aware that before coating with latex paint, the walls will need to be perfectly aligned, and in addition, regular maintenance is needed for such walls.

More expensive alternatives

If the repair of the bath is not planned to be carried out in an economical way, then much more materials can be found to replace tiles.

Marble wall decoration in the bathroom

Natural marble or granite tiles have been a trendy finish for quite some time now. Fastening tiles made of natural stone is made with a special adhesive made on the basis of epoxy resin. Approximately the same composition was developed for grouting, which must be carried out without fail. Before replacing the old tiles with natural tiles, you should completely remove it and then perfectly align the walls.

It is not easy to carry out such work on your own, so it is better to turn to professionals, although they take a lot of money for their work.

Marble tiles in the bathroom

A finishing material called agglomerate is made from cement with a synthetic filler. The performance of this material is not worse than that of ceramic tiles, while it allows you to create unique interiors, because when heated to a temperature of 650 degrees, it is easy to bend to create a curved tile.

Wall linoleum is a fairly new finishing material that is gaining popularity very quickly. For its production, PVC is used with various additives that significantly increase its strength. Mounting wall linoleum is easy and convenient, even inexperienced home craftsmen can do it. A variety of colors contributes to the growth of the popularity of this material, despite the fact that it is still very expensive.

Linoleum on the walls in the bathroom

An excellent option for rooms with a high level of humidity are MDF panels. These hygienic and durable panels are not only available in different colors, but often imitate tile, stone or wood. MDF panels are produced in sheet, rack or tile versions.

Method of mounting MDF panels

In order to independently decorate the room with MDF panels, you do not need to have special skills. To work, you will need the following:

Ÿ screwdriver;
Ÿ perforator;
Ÿ hacksaw and scissors for metal;
Ÿ SD and SD profile;
Ÿ 25 mm self-tapping screws;
Ÿ Silicone-based adhesive sealant.

Before starting work, the wall should be primed with an antiseptic solution, mark and install the profile. In addition, before attaching the panels, care should be taken to lay electrical wiring and other communications. If the walls are smooth, the panels can be glued with waterproof glue directly on them, and if not, then they are glued to the profile. It is very important not to forget to treat the joints between the panels with silicone sealant.

PVC panels in the bathroom

Finishing the ceiling and floor in the bathroom

Modern finishing materials make it possible not to use tiles in wet rooms, not only on the walls, but also on the ceiling and floor. Porcelain stoneware flooring is perfect for the floor.

For the bathroom, it is better to choose porcelain stoneware with a rough surface so that the wet floor is not too slippery.

Often, mosaics are used to finish the floor in the bathroom, but the seams between the individual elements should be sealed with a vitreous mixture.

If the interior of the bathroom is intended to be kept in a marine style, then sea pebbles can be laid on the floor. Under such a coating, it is best to lay a warm floor.

A stone floor is considered a good alternative to tiles, but it should be remembered that artificial materials are not only cheaper than natural ones, but also much more practical.

In the bathroom, you can even arrange a wooden floor, but the wood is covered with protective impregnation and wood species of wood that are moisture resistant (wenge, mahogany, teak) are used. This finish is environmentally friendly and aesthetic, in addition, the wooden floor is warm enough and does not require additional heating.

Laminate on the floor in the bathroom

Very practical materials such as laminate and PVC tiles are considered very popular for decorative flooring.

The most popular bathroom ceiling finishes are plastering and suspended structures. Plastering and subsequent painting is a classic budget option, which, unfortunately, is considered impractical compared to suspended structures.

Slatted ceiling in the bathroom

Ceramics has long been a universally recognized classic for the shower room. The tile is a reliable, durable and stylish finishing material, which also has high performance properties. However, it is not always possible to purchase ceramic products for various reasons, for example, due to personal preferences or unaffordable prices. Therefore, many people are thinking about a worthy alternative to the material, and there is one!

For the bathroom, it is best to use finishing materials that meet all the necessary requirements. They must have an attractive appearance and high performance. This is due to the fact that the shower room is a specific room with high humidity and temperature changes. In addition, the shower room should have a presentable design and blend well with the rest of the interior. Requirements:

water resistance;
strength;
reliability;
aesthetics;
durability.

Thus, instead of ceramic tiles, you can use any other raw material that meets the above requirements. It is these qualities that will help to carry out the effective design of the bathroom of its wall, ceiling, as well as flooring. In addition to these parameters, it is necessary to take a responsible approach to the environmental friendliness of the material, its price ranges, to resist fungus, mold, rot and other microorganisms.

Options

There are a number of new and not-so-great ways to replace tile in a shower room. Each of them has its own advantages and disadvantages both in relation to ceramic products and in relation to each other. It is worth noting that today there are no ideal materials. Therefore, you should put up with certain weaknesses, minimize them or skillfully avoid their manifestation. Alternative:

Dye.
Wood.
Plastic panels.
Mirror or glass tiles.
Waterproof or liquid wallpaper.
Fake diamond.
Mosaic.

Of course, some materials are highly controversial, while others can be exploited under certain conditions, such as wood. After all, ordinary rocks are absolutely not suitable for replacing tiles. Why it is recommended to use waterproof - beech or bog oak. However, this option will not be affordable for many consumers, besides, it is more suitable for the floor than for the wall.

Dye

It is considered a versatile alternative that can be used in place of ceramic tiles. Latex formulations are distinguished by a wide variety of assortment. Various colors and shades allow you to experiment with design. The water resistance of the paint is at a high level, which allows it to be used in the bathroom without any restrictions. In addition to decorative functions, coloring compositions protect the wall from dirt, mold and fungus.

Caring for such a coating is not difficult. It is enough to wipe or even wash the surface with soapy water. It is best to apply the paint in no less than 2-3 layers, which will ensure rich color and proper performance of its functions. The latex composition does not have a strong chemical odor, as well as other harmful properties. The whole complexity of the paint lies in the way it is applied.

This requires a room, which will require additional financial, labor and time costs. Carry out the plastering of the surface, then lay the plasterboard panels and putty them. The resulting surface must be perfectly even, scrupulously primed, possibly using self-leveling compounds, as well as a vapor barrier primer.

Plastic panels

You can replace tiles with another modern material - plastic panels. They are perfect for walls or ceilings. These products are characterized by an affordable price, easy installation, in addition, their wide range allows you to choose the most suitable option. Plastic panels can have a variety of structures, colors, sizes, as well as be glossy or matte.

As an alternative to ceramic tiles, PVC can be used in the shower room by imitating natural stone or marble. Outwardly, it looks very attractive and even luxurious. One of the most popular products are panels of snow-white color, less often shades of pastel colors are used. However, in order to carry out the installation of products, it will be necessary to prepare a bathroom.

With proper finishing, plastic products will be very difficult to distinguish from tiles. Another plus of the installation of the coating is the absence of the need to align the walls and ceiling. It is as a ceiling covering that it is best to use PVC. The weaknesses of the material include low strength, and if poor sealing of the seams is carried out, then for some time a fungus will appear on the inner surface of the products.

Glass and mirror tiles

This material can be described as refined and at the same time durable, but quite expensive. This tile in the bathroom will last more than one year, as it is not subject to deformation and does not lose its original appearance throughout the entire period of operation. A wide range of products allows you to realize any ideas. Glass is an environmentally friendly material that is also hygienic. It can be used both separately and in combination with other finishing products.

Waterproof or liquid wallpaper

The use of wallpaper instead of tiles, one might say, is a rather unusual measure, although effective. decorated with liquid or moisture-resistant wallpaper look attractive. However, it is best to combine this material with PVC panels. Vinyl or fiberglass wallpapers are primed with a moisture-resistant mixture that has antifungal components. Joints for better sealing are treated with a silicone compound. Liquid products are simply applied with a spatula to the wall. They can be cleaned with a damp cloth and soapy water.

Video instruction

Sometimes it becomes necessary to change the design of the old ceramic tiles in the bathroom without major repairs. It happens that the pattern on the tile has faded due to limescale, and defects in the form of small potholes or cracks have appeared on individual elements of the coating. They resort to decorating the cladding, and when it is necessary to change the style of the interior. You can update the tiles in the bathroom without changing it yourself in several ways.

Damaged cladding is corrected by partial replacement of tiles. A contrasting tile or decor is glued to the vacated space.

Dismantling begins with the opening of the seams. For this tile, something sharp is circled along the contour. Then the ceramic tile is pry with a chisel. After that, they clean the wall from the old mortar and glue the necessary element. Don't apply too much glue. Tiles should not rise above the rest of the cladding.

You can also update the bathroom in a simpler way - with the help of vinyl stickers. This method is less labor intensive. Stickers are recommended to be glued to the walls, because there they will not be subjected to mechanical stress.

The tile is also decorated with contour paints. The easiest option is to apply dot painting or depict geometric shapes. The walls in the bathroom are also completely repainted.

Vinyl tile stickers

Decorating tiles with stickers does not take much time. Damaged tiles are not reconstructed before. Vinyl stickers will hide chips and cracks.

For bathroom decor, you should use stickers that are resistant to moisture, steam and cleaning products. It is not necessary to glue the entire lining with them. You can update the old tiles in the bathroom with the help of stickers by arranging them in a checkerboard pattern. To do this, choose stickers of the same size as the tile.

Another option for updating the cladding with stickers is to create decorative panels. They are placed above the sink or in the central part of the wall. You can buy a ready-made panel or assemble it from individual small stickers yourself. The second option is more preferable when creating large compositions.

On sale there is a self-adhesive film for the bathroom in rolls. It is a little more difficult to work with than small stickers, as bubbles and folds can occur during decoration. Therefore, the film must be well stretched when gluing. If bubbles still form, they can be pierced with a needle.

Application of patterns

The pattern on the tile should be chosen taking into account the design of the room. For a bathroom in a modern style, geometric patterns are suitable. They are easily applied using stencils that are glued to the tile. In this case, you should use spray paint. It is convenient to spray on a stencil.

Work with tiles is reduced to the following principle:

Fixing defects.
Foundation preparation.
Painting.
Applying a protective compound.

Before decorating on a tile, all chips and cracks must be repaired. It is best to use putty for wet rooms. Restoration of tiles is a mandatory step, because the paint will emphasize the existing defects.

Potholes and cracks in the old tile are repaired with a small trowel. The dried putty is rubbed to make the surface of the tile more uniform.

Before applying the drawings, the tile must be thoroughly washed. After drying, it is degreased with acetone. If paint on ceramics will be used to draw patterns, then the tile should not be treated with fine-grained sandpaper and a special primer. Such decorative compositions fit perfectly on smooth bases. When using all other types of paints, it is worth increasing the adhesion of the tile.

For drawing a picture, you can also use improvised means, such as masking tape. With its help, a pattern of triangles is applied. This modern solution is suitable for square tiles. The location of the triangles must be thought out in advance. The easiest way is to sketch on paper.

To apply the pattern, you need to divide the tile in half diagonally. A thin adhesive tape is glued around the desired triangle. Then the figure is carefully painted over with a small brush.

Instead of patterns, you can resort to continuous painting of tiles. This is the most versatile cladding decor option, because a plain tile will fit into any style.

Solid painting without removing

With continuous staining, the entire surface of the cladding is processed, including tile joints. Work is carried out with a roller and brushes. The paint is applied in a thin layer. Particular attention is paid to the seams. They are carefully painted over with a brush.

Updating the tiles in the bathroom with the help of solid coloring is not possible everywhere. It is better not to touch areas of the cladding that are often exposed to steam. After some time, the paint in these places begins to peel off and move away from the tile.

Tiles are painted near the washbasin, toilet bowl and on the floor. The walls around the bathroom, if desired, are finished with steam-resistant panels. They are mounted on top of the old tiles. Before finishing, the walls are cleaned and degreased. Then they are dotted with special glue or liquid nails. The panels should be pressed firmly against the wall so that they adhere well to the tile.

With the help of continuous painting, space is zoned. For example, you can make a contrasting shade in the shower walls. Another option is the distribution of color accents. The space in this case should be evident immediately upon entering the bathroom. In a different color, you can paint the wall near the washbasin.

Basic Rules

All cladding must be cleaned of dirt before work, otherwise the paint will lie unevenly on the surface of the tile. We recommend the use of abrasive cleaners to remove dirt.

The tile must be treated with fine-grained sandpaper and adhesive primer. This will increase the adhesion of the paint to the smooth tiles in the bathroom. Particular attention during processing should be given to tile seams.

It is worth using paint designed for ceramics or faience. Latex and alkyd formulations have proven themselves well. It is necessary to paint a small area of the cladding, located in an inconspicuous place, and then check the durability of the coating.

Painting should be started only a day after applying the primer. During this time, the product will definitely dry and form a strong film.

The paint is applied in several layers. This will result in a more even and durable coating. The previous coat of paint must dry completely.

Required Tools

To update the tile, you will need the following tools:

Sandpaper.
Sponge.
Masking tape.
Cover film.
Roller with a small pile.
Brushes.

Do-it-yourself voluminous decor

They help to update the tiles in the bathroom and improvised means like beads, small shells and pebbles. Decorative elements are glued to the tile. They must be small so as not to fall off. It is better to place voluminous decor in places that are slightly dirty, because textured elements are harder to wash.

Seam update

It is not necessary to update the old tile. You can give the cladding a fresher look by cleaning the grout. Over time, the seams darken, change color and become dirty. This is due to high humidity in the bathroom. To cope with the darkening of light grout, you can use various means. To restore color, it is recommended to use special pencils or markers. You can also restore the grout with paint. For cement mixtures, Fuga Fresca from Mapei is suitable. The advantage of this paint is an extensive range of colors.

Special tools do not always help to cope with the darkening of the seams and dirt on them. It is especially difficult to restore light shades. In addition, paint is not advised to be applied to cracked seams. The only way out in this case is to replace the grout.

Rules for cleaning damaged areas

The damaged area is removed with any sharp object.
For better cleaning of the seams use a vacuum cleaner.
In case of minor damage, the grout is replaced locally.

Complete replacement

Completely remove the grout mechanically. To do this, you can use a special scraper-extender. They need to work carefully so as not to damage the tile. Old cement-based grout should be pre-treated with an acid cleaner. This will help speed up the replacement.

Of course, the most practical way to finish a bathroom is tiled.

But, unfortunately, not everyone can afford such an expensive pleasure.

And then the question involuntarily arises, how to replace the tiles in the bathroom.

Despite the practicality of the material, it can not be used. To do this, you should find a cheaper option.

There are many other ways to replace tiles. They will be much easier to apply, and most importantly, help save money.

Undoubtedly, tile is an ideal and practical option for the bathroom, toilet and other areas with high humidity.

This is due to some circumstances:

There is a high degree of humidity in the restroom. The walls are in constant contact with water, not all materials will withstand such interaction.
The tile is strong enough. When an object falls, it is more likely to remain in its original form than, for example, a panel.
This material is resistant to chemicals that can leave marks on the surface.
Tiles are easy to care for. Limescale, water, foam, toothpaste and dirt can be easily cleaned with a damp sponge.
The tile, when exposed to temperature, does not emit any harmful substances, therefore it is an ecological material.
She has the perfect look. Now the construction market is filled with various types of this material. With the help of tiles, any design is embodied in reality.

Although tiles have more advantages than disadvantages, it makes sense to consider other ways.

Possible options

Often people are interested in how to replace the tiles in the bathroom on the wall? When choosing a finishing material for the bathroom, the basic requirements of the room should be taken into account.

These include: moisture permeability, practicality and, of course, aesthetics. The following materials may help with this question:

special plastic panels
waterproof wallpaper
dye
mosaic
wood trim
fake diamond

If the question arises, how to replace the tiles in the bathroom on the floor, the solution is simple. The most acceptable option in this case would be an artificial stone or self-leveling floor.

Regarding the replacement of tiles on the walls, we will talk in more detail below.

Before you change the tiles in the bathroom to another alternative, you need to make sure that the new material will be no worse than the tile that has been proven over the years.

Plastic

When replacing tiles with a cheaper one, you should first turn your attention to plastic panels. With them, you can create a perfectly flat surface that will be resistant to moisture.

When the area of the bathroom is large, which is extremely rare, you can not remove the old material, but install the panels on top. When choosing as a panel finish, installation time will be short. This is due to the fact that one panel has a large coverage, so less installation steps will be required.

There are two ways to install panels:

using liquid nails
on a prefabricated frame

When the surface is uneven, it is better to use the second option. The frame can be made of metal or plastic profile. Wooden planks are also used.

But they should be treated with an antiseptic in advance. This will keep them from rotting. Since the bathroom is still very humid .

The joints between the panels will not be noticeable due to the ribbed surface. Therefore, at first glance, it seems that the surface is solid. The main thing is to find the highest quality material that, when heated, will not emit harmful substances.

Wallpaper

In general, using wallpaper in the bathroom is impractical. In rare cases, people use them as decoration. But at the same time they buy special waterproof wallpapers.

You need to glue them on a perfectly flat, pre-treated surface. Glue must also be moisture resistant.

Widely used in the bathroom wallpaper made of special fiberglass. They themselves protect the walls from moisture. Also, many people use liquid wallpaper, which can be painted in any color.

The color schemes of this material are varied, but it is not practical for this type of premises.

Dye

A good alternative to tile is paint. The main advantage of this material is protection against fungus.

Caring for painted walls is very easy. With the help of paint, you can create a unique design. In addition, the paint washes well with various cleaning products.

Walls must be well leveled before painting. Which will require additional costs. This is usually done with plaster and primer.

Paint can be applied in the following ways:

with a brush
roller
using a sprayer

The most efficient option is the last one. But before starting the procedure, you will need to take out the bathroom, toilet and furniture so as not to get dirty. In the absence of the possibility of removal, you can cover them. Paint is good because it can be applied to walls and floors.

The most budget way

As mentioned above, tile is one of the best options for finishing a bathroom, but it also applies to the most expensive option.

The rest of the materials for finishing the bathroom will be much cheaper. In addition, you can make repairs with their help yourself, without seeking the help of craftsmen.

The most economical material is the use of plastic panels. This is due to the fact that for this you do not need to align the walls, and, accordingly, spend money on additional material.

It can be easily installed. And the construction market includes many colors of this product. If the panels are correctly installed according to all the rules, they will serve for a long time.

How to put PVC mosaic on glue in the bathroom - on the video: