During the construction of the bath, wood is often used. It can serve not only as the main material of the building, but also act as a finish. As for which tree is better for a bath, not all wood is suitable for this building - only certain species that have special qualities.
The variety of building materials on sale can cause confusion. Many companies are currently engaged in the design of baths. They offer various materials as the main or finishing. In any case, even if the building is built of brick, only wood is used in the steam room. It is important to decide which tree to sheathe the steam room will be better. So from which forest is it better to build a bathhouse?
Pine and spruce
Pine log cabins have been popular for many years, as this type of wood has a low price and good qualities. The logs are light, and the fibers of the material are strong enough. Due to this, such wood weighs little and is easy to process.
Pine log cabins are slightly deformed under the influence of weather conditions, since this material is flexible and expands and contracts to a small extent with temperature changes.
Since the bath is not the most important building on the site, not so much money is allocated for it. Since pine is a fairly cheap building material, it is often chosen for this building. This wood has one interesting feature - it emits a good, pleasant smell that promotes relaxation.
But pine also has some disadvantages:
- fragility. This wood rots quickly, especially in high humidity. It can also contain pests.
- When heated, resin can be released from it, which, if it comes into contact with the skin, can cause significant burns. If the wood is poorly dried, it will stand out a lot, which will make it dangerous to be in the building - an excess of essential oils can lead to suffocation.
It is for these reasons that pine is not suitable for a steam room; other types of material must be used for it.
Another answer to the question of what kind of wood the bath is made of is spruce. A bathhouse made of pine, like spruce, is easy to build. These materials are easy to process. The main difference between them is the color.
If the pine is white, then the spruce is golden white and does not darken over time. With all this, spruce wood is cheap. However, as is the case with pine, spruce also releases a lot of resin, which requires an internal cladding with a vapor barrier.
Expensive types of needles
These include:
- larch;
- cedar.
A popular type of wood is larch. Compared to spruce and pine, its logs are stronger and more durable. The dried wood of this tree is close to stone in strength and is perfect for building a bath.
A building built of larch will serve for a long time. This wood is resistant to moisture, it is not susceptible to pests - all kinds of insects start up in it extremely rarely. In its resins there is an antiseptic, so that the material does not rot.
Essential oils contained in larch contribute to the relief of cardiovascular and nervous diseases. In terms of price-quality ratio, this wood is an excellent material for the construction of bath buildings.
When choosing which wood is better for building a bath, it should be borne in mind that larch has a serious drawback - the release of a large amount of resin. Because of this, it is also required to ensure the tightness of the steam room.
Another type of wood is cedar. This material is quite expensive, so very few people can afford such costs. In addition, it is difficult to find cedar in stores - it is forbidden to cut these trees. It gets on sale only from burnt areas or as a result of illegal logging.
Cedar fibers are very strong, dense. Log cabins from this material do not shrink, do not bend and do not crack. Cedar is resistant to decay, temperature changes, it has a beautiful color and interesting texture.
Boards and logs from it emit a small amount of resins, for this reason they are not dangerous to human health, on the contrary, they are used for aromatherapy. Therefore, people who can afford to buy cedar wood prefer to build saunas from it.
According to experts, cedar is an excellent material for construction, and if it is possible to purchase it, one should not refuse to build a bath from it.
Oak log cabins
Finding out what kind of wood the baths are built from, one cannot ignore the oak. It is he who is the most durable and expensive type of hardwood. Despite the fact that oak log cabins are now rare, they are often preferred by wealthy people. This material is strong, heavy and hard. The structure of this type of wood turns out to be almost eternal, of course, with proper care.
To find out what is better to make a log cabin for a bath, you need to consider that oak perfectly tolerates high humidity, as it is almost as strong as stone. For this reason, this material is ideal for building saunas. But when dried out, oak logs can crack, so it is not recommended to use them in regions with a hot climate (this is, for example, the Kuban).
Since oak wood is very heavy, when building a sauna, it is necessary to carry out a solid foundation.
When figuring out which wood bath is better, it should be borne in mind that this material has no drawbacks. Only a high price can be added to their number, which is why oak wood is rarely used.
Other types of deciduous trees
A commonly used type of hardwood is linden. It contains special essential oils that create a special microclimate in the bath, which can prevent the development of colds, nervous diseases, and liver diseases. In addition, they are able to alleviate the condition in these diseases. Now about the pros and cons of a linden bath.
Advantages:
- This wood is light and soft. Thanks to these qualities, construction is not time-consuming and easy.
- Since linden has a low thermal conductivity, buildings made from this type of wood warm up quickly, and this requires less fuel. In addition, the steam room does not cool down for a long time.
- If the logs are well dried, they do not shrink, and the building can be used immediately after construction is completed.
It is thanks to these qualities that a log house made of linden for a bath is an excellent option.
But this wood also has some disadvantages.
- The main disadvantage is the low fiber density and resistance to the process of decay. As a result, insects quickly appear in the material, the fungus spreads. For this reason, linden saunas need to be dried thoroughly, and log cabins are short-lived (read: "").
- The rather high price is considered another drawback. Linden is more expensive than pine and spruce, but at the same time cheaper than oak, larch, and even more so cedar. However, given the advantages of this material, the price is quite justified.
The main disadvantage associated with rotting, the spread of fungus, the appearance of insects can be quite successfully solved. For example, linden boards are successfully used as interior decoration for baths made of brick, aerated concrete and other materials. In this case, the building will last a long time. In addition, if damaged boards are found, they need to be changed in the near future - then neighboring areas will not suffer.
Aspen is also an inexpensive type of wood. It is distributed everywhere, which to a large extent affects its cost. It is also similar to linden and has many of its qualities, including light weight and ease of handling.
It is not difficult to choose from which wood it is better to build baths - it is enough to know the features of the materials offered for sale.
I now have an old wooden house on a plot of 8 acres, which requires annual investments. It’s a pity to demolish this house - there will be nowhere to come to rest, and there is no money for a new one yet. Therefore, I decided to build a bathhouse with an attic room next to it. This option will be transitional from the old house to the new one.
So, before me was the question of choosing a log house for a bath. I looked at several dozen sites selling log cabins.
How and by what parameters to choose?
Deciding on a project
As I wrote above, I would like a bathhouse with an attic. This is the first requirement. Initially, I planned to build a bathhouse with a 6x6 attic. But due to the requirement to build structures on a site no closer than 3 meters to the fence, this size of the bath would leave little space on the site (I also have a house, a garage, beds and a playground). However, in contrast to this, I would like to have in the bath:
- spacious rest room
- spacious attic
- separate shower room
- steam room
- separate entrance hall
Therefore, I still settled on the average choice of the 6x5 project.
As you can see, everything is there. That's why first advice at the choice of a log cabin project:
Consider the size and your own wishes for arrangement.
Foundation selection
It all depends on the soil and the severity of the structure. For most soils and buildings, the choice of a shallowly ruined strip foundation made of monolithic reinforced concrete will be universal. It is also possible to choose the most reliable slab reinforced concrete foundation or the more economical of screw piles.
I settled on a universal tape.
Second advice:
Interview your neighbors, hire a specialist surveyor for advice on choosing the foundation for a bath for your type of soil.
Choice of wall material
There are the following types of bath walls:
- from round logs
- from glued beams
- from profiled timber
- on frame-shield technology
Personally, I did not doubt for a second - the bath should be made of logs. Glued laminated timber - expensive, frame-panel technology - not for baths. Bath must "breathe". Profiled timber is a matter of taste. I wanted a log house (or rather, a log house in the paw). Third tip
The main cost of the bath will consist of its base. Therefore, first of all, decide on the price. Next, consider the summer or winter version - wall thickness, insulation, etc.
rounded log
Roof selection
In fact, it's a matter of taste. I chose metal tiles because of the price-beauty ratio. A more budget option is roofing material. More expensive, but aesthetic - a soft roof. Fourth tip:
The choice of roofing is justified only by price and appearance.
metal tile
Budget
This is probably the most decisive factor. How to save on the construction of a bath should be decided by everyone. In my version, a turnkey ready-made bathhouse with electrics, plumbing and heating connections cost in the area 900,000 - 1,000,000 rubles! Not bad. What can you save on?
- The foundation is tape - pour it yourself / hire people. Piling - screw piles with a friend. Savings from 100,000 rubles.
- Walls - to put up a log house yourself - will be difficult, so you can save only on the type of material. Frame and rounded logs are the most economical options. Savings from 150,000 rubles.
- Roofing - if you are interested in the roofing budget, then roofing material will cost about 50,000 rubles, ondulin - 120,000 rubles, metal tiles - 130,000, soft roofing - 150,000 - 200,000 rubles. The choice is yours. For me, metal tile is a universal option.
In total, according to my calculations, you can save from 200,000 to 400,000 rubles.
Fifth tip:
Look for ways to save money.
The bathhouse is an important outbuilding. Every owner of a private house or cottage has it. In many houses, it is now possible to install both a bath and a shower, but the bath is still in demand. Where else can you relax, take a steam bath with a broom, rub yourself in the snow? But the building in which people wash is constantly exposed to moisture, steam, heat. It is used at any time of the year, while the indoor temperature can be 80°C, and the outside temperature in the cold season - 15°C.
You can completely build the entire bath yourself, that is, the walls, and the floor, and the roof. The second way is to purchase a log house and install it on the foundation.
This is easier and faster, but now many companies offer different log cabins for buildings, so the problem of choice arises. How to find out which log house is better to buy?
First of all, you need to find out from the seller what kind of wood the blank was made of, where it was cut down, at what time of the year. At the second stage, you need to carefully consider the condition of the logs. The third important point is the type of timber from which the frame is made. Another important factor is the price. As a rule, similar products are presented on the market, but at the same time, different sellers have different prices for the same product.
What are log cabins made of?
For their manufacture, not only coniferous, but also deciduous trees are used.
Most often, baths and saunas are made of spruce or pine, because they tolerate shrinkage well, are inexpensive, and easy to handle. But at the same time, pine is more susceptible to moisture, that is, the period of use of such a log house is less than spruce. They also have a common drawback - there is a lot of resin in the trunks, it will constantly stand out from the high temperature.
A cedar log cabin is a very good choice. It is beautiful, durable, strong - the logs will not crack over time, it easily tolerates shrinkage. Its disadvantage is that the price is too high.
Larch trunks are good for a bath, they tolerate a humid environment well, are very durable, and do not burn well due to the fact that they contain a lot of resin. The price of a log house made of larch is lower than that of cedar, but much more expensive than the rest.
Many, when asked which log house is better, boldly answer that you need to buy a product only from coniferous trees. In fact, some hardwoods are suitable for baths. For example, aspen. It does not crack, does not rot from constant exposure to water, it is light and durable, does not damage during shrinkage, and is notable for its low price. You can use lime logs. Such a bath is easily warmed up and does not cool down for a long time, light and durable, but it is destroyed by constant exposure to moisture, that is, its service life is short. And the price is higher than that of aspen.
Of great importance is the place where the trees grew. It is desirable that the soil there was not very wet. The next important moment is when the trees were cut down. The best time is winter, as they are stronger at this time.
Back to index
The appearance of the log
During the construction of a log house, the quality of workmanship is important, and not just the type of wood. Therefore, before buying, you need to carefully examine the building and check whether there are cracks, damage, whether the logs or beams are even, whether the color matches the natural color of the tree. Pay attention to any dark spots, these may be signs of decay. The smell emanating from the tree should be pleasant, without unnecessary impurities.
Log cabins are made of the same processed logs (rounded timber), profiled or glued timber. The difference between them is that the first two types of material are solid, and the third is made up of several boards or bars. For a bath, it is not recommended to use glued laminated timber, since with significant heating it can emit a specific odor and harm health.
Introduction
The preliminary decision to use a log house for the construction of your country house is fully justified. Log cabins are available, they are quickly assembled, with proper assembly they hold heat well and can be lived in all year round. However, not all log cabins are the same, and in order to choose a truly high-quality log cabin, you need to understand the basic concepts of manufacturing, felling and the production of log cabins, as well as understand what types of log cabins exist.
Choosing the right log house for yourself, that is, choosing a log house that will not only please the eye, but also serve for many years.
How to choose a log house for yourself at the place of felling
When choosing a log house, it is important to know where the log house is being cut. For example, if a company offers log cabins in Moscow and the Moscow Region, this most likely does not mean that the log cabin is being cut in this area. Please note that log cabins cut above the 55th parallel, in the so-called "northern" forests, are considered correct.
Types of log cabins
By definition, a log house is a prefabricated wooden structure made and assembled from long pieces of wood. The elements from which the frame is assembled can be logs with a diameter of 160-280-400 mm or a wooden beam with sections of 150 × 150 mm and more. Depending on the elements used to assemble the log house, we distinguish three types of log house:
- Log cabin from logs of manual felling;
- Log cabin from a bar;
- Log house made of industrially rounded logs.
Log cabin
A log house made from hand-cut logs is made from solid trunks of coniferous (spruce, pine, cedar) or deciduous (alder) species. The logs of this type of log house are distinguished by a small difference in the diameter of the log along its length (log run-off), which is why they distinguish the butt (wide bottom) and the top of the hand-cut log. A log cabin is cut and assembled with alternating butts and peaks. This type of felling requires manual straightening, and sometimes additional felling of locks and grooves of supplied logs.
You can live in a log cabin in 1-2 years after assembly, and this is at best. For a year, a log house is settled from logs, and only after a year can the first caulking (sealing of gaps) of the log house and its finishing be carried out.
Log cabin
A beam for a log house is a puff, glued or solid wooden product with a textured section close to a rectangle in section. The cross section of the beam is such that when assembling a log house from a beam, the adjacent crowns of the log house are fixed not only with locks, but also with a profile along the length of the log. Such log cabins are delivered as a designer, completely ready for assembly, with the exception of holes for dowels: wedges fastening the beams in adjacent log crowns.
You can live in a log cabin made of glued laminated timber immediately after assembly. You can live in a log cabin made of a solid bar of natural moisture for the next season, after it dries naturally.
Log house from logs
The rounded log is made from wood, all the same, coniferous or hardwood, with processing along the entire length of the log on an industrial machine. Thanks to the processing, the log along the entire length becomes a single diameter. Log cabins made of rounded logs are distinguished by their elegant appearance and somewhat simplified assembly. Such log cabins are delivered ready-made, completely ready for assembly, with the exception of holes for dowels: wedges fastening logs in adjacent crowns.
Finishing in a log house made of rounded logs can be carried out a year later, after its shrinkage by 1/25 of the height. You can live after finishing.
What are winter log cabins
In advertisements, the concept is often found, a log house for winter felling. This is a professional concept regarding the season for harvesting timber for a log house. For example, you need a chopped bath in Moscow and the Moscow region. You need to order a log cabin of a bath at the end of summer, so that it is cut down in the winter, and collected in the spring. You need to understand that no one cuts log cabins in the Moscow region. Wood is harvested closer to the north of the country. It is believed that the best wood for a log house should be harvested in winter, from the end of autumn (the first frosts) to the beginning of spring (the first thaws). It is in winter that the fermentation of juices in the wood subsides and the life of bacteria freezes. Winter forest wood, dry, with a minimum amount of moisture. It is worth noting that peeling (barking) of logs (removing the bark) should be carried out immediately on the plot, before they are delivered to the felling site.
These simple tips will help you choose a log house for yourself and it will serve you for many years.
What you need to know when ordering a log house for a house or a bath; how, without being a specialist, to control the quality of the production of a log house; what are the nuances, secrets and features when choosing, manufacturing and assembling log cabins - you will find answers to these and other questions in the article.
A wooden house is among all the alternatives, one of the best house options for permanent residence. The most reliable wooden houses, the warmest and most time-tested are log houses. Today in the market of construction organizations there are a huge number of proposals for their manufacture and assembly. Therefore, each person, not possessing any building skills, can come to such an organization, point his finger at the project he likes and, after a certain period, get a finished house. However, a large number of proposals determines a large number of unscrupulous performers. What you need to know when choosing a log house for the house, so as not to fall for the bait of such "unfortunate builders"? There are a number of nuances that determine both the quality of the log house and its final cost.
Type of logs for a log house
Currently, log houses are made of two types of logs: non-rounded and rounded.
Not rounded logs. In fact, it is just a tree trunk, freed from knots and bark (barked). A partial log fence is possible. The main distinguishing feature of such logs is the preservation of natural tapering, that is, the difference between the diameters of the opposite ends of the log.
- since the outer dense layer is preserved, non-rounded logs are more resistant to aggressive environmental influences, that is, they are more durable. In addition, they crack less;
- have lower thermal conductivity, that is, houses made of such logs are warmer;
- natural color and texture;
- cheaper, as they are not subjected to complex technological processing.
- longer in preparation for laying the log house, since the crowns of such logs are made by hand and require individual adjustment to each other, in addition, the inability to achieve a perfect fit leads to the need for enhanced insulation of the seams between the crowns;
- require more time to shrink.
Rounded. Logs pass through a special machine, in which they are given one diameter along the entire length. Further, in the factory, all the necessary grooves are made by machines. Thus, the individual crowns are perfectly matched to each other.
- individual crowns are faster to manufacture;
- it is easier to assemble a finished log house from rounded logs;
- due to the factory fitting of individual crowns, the log house needs less insulation of the seams;
- due to the single diameter of the logs, the finished log house looks neater.
- a house made of logs needs additional processing with bioprotective compounds;
- high price.
From which logs to make a log house, it is necessary for everyone to decide on their own. The debate about which is better began with the appearance of rounded logs and continues to this day. Factory conditions for the manufacture of crowns for a log house actually minimize possible flaws in production. However, here there are several nuances that you need to know and consider if you decide to buy a log cabin made of rounded logs. The same nuances are valid for houses made of unrounded logs.
Choosing or creating a house project
The construction of any house begins with the selection or creation of a project. What criteria are primarily taken into account in the project? This, of course, is the size of the future house and the number of storeys. The lengths of the walls determine the area of one floor, which, when multiplied by the number of floors, will give the total area of the house, and the height of the walls will determine the dimensions of the ceilings. Knowing some of the nuances of building wooden houses, you can optimally select these criteria and, at the same time, not overpay.
When choosing a project, it should be taken into account that the standard length of lumber is 6 m. This also applies to logs. At such a length, the taper is the smallest, which in the manufacture of rounded logs gives a minimum of waste, and the construction of a log house from such non-rounded logs is the most technologically advanced. Thus, when planning a house with dimensions that are multiples of 3 m, that is, 3, 6, 9, 12 m, etc., you can save a lot on lumber, as other sizes will lead to material overruns.
Further. The structural feature of the log house is that the floor joists cut between the first and second crowns. Ceiling beams are similar - between the penultimate and last crowns. Therefore, the actual height of the ceilings will be equal to the height of the log house of one floor minus two diameters of the crowns and minus 5-10% for shrinkage. This must be known when calculating the required amount of material to provide the required ceiling height.
The next nuance will be the internal walls. If you are planning a house with several floors, then you should not forget that your interfloor floors will be wooden. To prevent the floor from walking underfoot, it is necessary to build retaining walls or retaining beams with pillars. The largest length of the floor lag, which rests at both ends on the supporting structures and does not play underfoot, is 3.5 m. Thus, when constructing a load-bearing internal wall, the width of the room cannot be more than 3.5 m. Save on material for such a wall and, if desired, it is possible to partially bypass the restriction of 3.5 m by constructing a retaining beam under the logs, resting its ends on the outer walls, and along its length on the retaining pillars. It makes sense to do the same step between the pillars no more than 3.5-4 m.
If necessary, the construction of interior partitions, such a design will be the basis for them. Lightweight construction, rather than a wall of logs, is also saving on material.
Another nuance that should be taken into account when designing is the gables. Which one to choose, log or plank? Perhaps, if the pediment covers an unheated attic, then it can be sewn up with boards. If it is planned to make a residential attic, then it makes no sense to build a wall of boards, insulate and finish - the operations are not cheap, and the final appearance of the house will be spoiled. Log cabin in this case would be preferable.
Selection of material for the log house
So, we decided on the type of logs, the project was chosen. What's next? Next, we order a log cabin. And here, if you want the log house to stand for more than one decade, you need to choose the right material. Again, knowing some specific nuances of choosing material for a log house, you can protect yourself from unscrupulous or illiterate manufacturers.
The choice of wood species
For the manufacture of log cabins of houses, coniferous wood is mainly used. These are pine, spruce, larch, cedar, fir, etc. In addition, aspen is used in some cases. Log cabins of baths are made of it, and some elements of log cabins of residential buildings.
Due to its uniform density, sufficient evenness along the entire length and low price, the main material for log cabins is pine. Spruce is used less often, as it is more prone to decay. In places of increased exposure to moisture - these are the first and under-rafter crowns and window beams - it is advisable to use wood that is not afraid of water - larch or aspen. There will be nothing wrong with making a log house entirely from larch, except for its very high cost. Aspen is not suitable for a residential building, as it is not warm enough.
To control the selection of wood for the future log house, you need to know what this or that type of wood looks like. Pine is a yellowish wood with a pronounced texture pattern. Spruce - similar to pine, only much whiter and less dense. Larch is an orange wood with a bright pattern. Aspen is white-gray, practically without a pronounced structure. Knowing this, it is easy to ensure that in the right places the manufacturer uses the most suitable wood for this.
Material troubleshooting
The timber used for the manufacture of a log house must be free of visible and invisible defects. Visible ones are easily recognized by simple inspection. Invisibles can be partially identified by the sound the log makes when tapped with the butt of an ax or a small sledgehammer. The sound should be sonorous, high, clear and almost the same along the entire length.
Control of the size of logs and technological grooves
It should be understood that not only the strength of the house depends on the thickness of the walls, but also its ability to retain heat. The required thickness of the walls is determined by the climate of the area in which the house will be operated. In log cabins, when calculating the thickness, two parameters must be taken into account: the diameter of the log (in the thinnest part, if it is not rounded) and the width of the bowl selected in the log for joining the crowns. So, the bowl should be about 2/3 of the diameter of the log. In a climate with winter temperatures down to -20 ° C, the bowl must be made at least 10 cm. At temperatures up to -30 ° C - 20 cm, -40 ° C - 30 cm. Moreover, no matter what, the diameter of the log should not be less than 20 cm.
If a log house is planned from unrounded logs, it is necessary to pay attention to the manufacturing process of individual crowns. Today, many craftsmen choose the grooves with a chainsaw, and not with an ax, as before. What is the result? The correct groove should be part of a circle that repeats the circle of the section of the previous crown.
In this case, the sealing material completely fills all the space between the crowns. The seam is tight and warm.
If you use a chainsaw, then two cuts will never give such a result. The result will be this picture:
The logs will touch each other only at the edges of the grooves. The rest of the space is empty. Each seam of such a log house is a bridge of cold. There is only one way out - to fill the empty space with insulation - either hard caulk, or, drilling holes, with mounting foam.
You can control how your frame is made only when the frame is not assembled. To hide this unpleasant moment for you, unscrupulous builders from the visible ends do everything right, but in the middle ... Thus, if you heard the sound of a chainsaw at a construction site, this is an occasion to think about the advisability of cooperation with just such a manufacturer. Although, in fairness it should be said that a chainsaw is not always inappropriate. It can be of great help in a number of operations. Therefore, only constant monitoring of the technological process and periodic measurements can largely protect you from buying a low-quality log house.
Cutting type
There are two types of cutting crowns in the corners - in the paw and in the bowl.
Cutting into the paw (no residue)
Suitable for summer buildings and bathhouses, since the corners in houses with such log cabins are much colder than those with bowl log cabins. In addition, the strength of such a frame is also much lower. When warping logs during natural shrinkage, the crowns at the corners, not being securely fastened, may diverge, which will create additional gaps. The only advantage of such a log house is the low price, since the log is fully used.
Cutting into the bowl (with the remainder)
The corners of such a log house are much warmer and stronger. If you plan to live in the house permanently, then it is advisable to make a log house in this way.
Log house installation
Log cabins from rounded logs are always first made in the factory, and only after that a finished log cabin is assembled from them on site. The interval between manufacturing and assembly should be as short as possible, otherwise, the more time passes, the greater the likelihood of warping of crowns that are not fastened to each other in any way and, as a result, crooked and slotted walls.
By the way, an undoubted sign of the high level of a log house manufacturer from logs is vacuum packaging for the period from manufacture to assembly. It will retain the original moisture content of the material, which will provide the crowns with a perfect fit to each other.
As for log cabins from unrounded logs, there are two options:
- production and assembly immediately on site;
- production, transportation and subsequent assembly on site.
What's better? If you manage to find a master who agrees to the first option, then it will be much better.
You buy the required amount of wood and bring it to the construction site. If the foundation of the house is ready, then the log house is assembled directly on it as the crowns are made. The rows are immediately laid with sealing material. If there is no foundation, then you can assemble a log house on temporary retaining pillars, followed by the construction of a foundation under it.
What will you get in this case. Firstly, cost savings due to the transportation of the finished log house. Secondly, assembling the log house immediately and permanently in place without additional disassembly / assembly, you will get a better final result.
Currently, sealing seams with non-traditional materials is gaining popularity - sealants, polyurethane cords, etc. It is up to you to use them or not. But is it worth it to build an eco-friendly wooden house and spoil it, at the same time, with various chemistry?
So, knowing just a few nuances of material selection and manufacturing and assembly technologies, you can easily make sure that your log house is of high quality, warm and reliable.
Loading...