How to close the pipes in the bathroom with tiles. How to close pipes in a toilet: spectacular ways to mask communications. Plastic box in the toilet: video

The open placement of water and waste lines is most often perceived as a violation of the overall design of the toilet room, which is usually eliminated by masking the pipes located in it. With particular acuteness, the issue of insulating openly laid pipe lines arises when a common sewer riser is located in the toilet.

In connection with the need to solve this problem, we decided to acquaint all interested parties with how to sew up pipes in the toilet, safely hiding them from the eyes of visitors. In the process of studying information on this topic, it turned out that a variety of building materials can be used to close pipes.

Material selection

environmental safety (no harmful emissions at high humidity and ambient temperature);
resistance to corrosion, as well as to its spread to neighboring objects;
the possibility of arranging a fairly light design that does not clutter up a small room.

When deciding on materials suitable for closing pipes in a toilet, the contractor is usually offered the following options:

plastic panels,
mdf panels,
waterproof plywood,
drywall (in moisture resistant design).

In addition to the characteristics of the material used, when choosing, its decorative properties should also be taken into account, ensuring a harmonious combination of the skin with the interior of the room itself.

Preparation of the supporting frame and its marking

Installation of the supporting frame structure should begin with measuring the niche in which water and sewer pipes are traditionally placed in communal apartments. To do this, you will have to arm yourself with a tape measure and make accurate measurements of the area where all the highways available in this place are located.

Small doors should be provided in the casing to provide access to water meters and valves.

Upon completion of the measurements, you will be able to draw up a small sketch containing precise instructions for the attachment points of the frame elements, as well as regarding the main dimensions of the future sheathing structure.

Covering with plastic panels

As an example of closing pipes placed in a toilet niche, consider lining it with plastic panels. The indisputable advantages of using plastic materials include the following:

simplicity and ease of installation, which does not require a lot of time;
low weight of the structure and the ability to quickly dismantle it;
high moisture resistance;
attractive appearance;
long periods of operation.

Before starting installation work, you should prepare all the materials and tools necessary for this:

the plastic panels themselves;
aluminum profiles (guides) necessary for arranging the frame;
fastening elements of the prefabricated structure (self-tapping screws, screws, dowels or nails);
perforator;
mounting knife;
building level, screwdriver and screwdriver.

Work order

There are two options for mounting panels installed in the toilet:

Complete or “deaf” hiding of a niche with pipes by aligning the installation plane of the panels with the wall surface. This finishing method leaves no traces of pipes (with the exception of the doors), which significantly improves the design of the toilet room. But at the same time, its usable area is somewhat reduced.
Partial closure of a niche, in which only one pipe is closed with the help of boxes. The advantages of this method include saving the finishing material and reducing the space occupied by the sheathing.

Having decided on the choice of a suitable way to close the niche, you can proceed to marking the places for attaching aluminum guides (profiles). For the subsequent installation of the guides, you should use the previously prepared sketch; at the same time, the fitting of profile blanks along the length is carried out using a hacksaw for metal. The direct fastening of the guides to the walls is carried out with the help of dowel-nails, driven in in increments of 30-40 cm. The sheathing panels themselves are attached to the guides by means of self-tapping screws.

It makes no sense to tightly close a niche with highways that have pronounced defects. This is explained by the fact that at some point in time you still have to completely dismantle the casing and frame for a major overhaul of the pipes.

Video

We offer you to watch a series of videos about the installation of a drywall box in the toilet:

People who decide to carry out a major overhaul in their apartment on their own will definitely ask themselves the following question: how to properly close the pipes in the toilet?

And this is indeed a logical question. After all, who will like it if there are various meters, valves and, in the end, sewer pipes everywhere in their bathroom or toilet.

To do this work, you need to know some basics that will help you do it as efficiently as possible.

Before answering the question of how to hide the pipes in the toilet, it is worth mentioning that this problem can be solved in several ways.

You can use blinds, mask sewer pipes with drywall or plastic moisture-proof panels that are popular in our time.

In this article, you will learn about the most requested methods that will help you understand how to close the pipes in the toilet and do it yourself.

Beginning of work

Remember that with a strong desire, you can disguise anything on your own, but in your case, this must be done so that later you can have access to certain valves or pipes.

If you wanted to do everything with your own hands, but it didn’t work out well enough, then you will have to break the wall that you painstakingly erected.

There are a number of precautions you should be aware of before you start building your own.

So, in order to hide the various plumbing details of the water supply in the toilet with your own hands, you must first check all the sewer pipes.

It is possible that they may have various defects.

You can, of course, not perform this check, but then there is a huge risk that suddenly their malfunction can lead to flooding.

It is best, of course, to carry out a thorough check of the various pipe connections with your own hands. It is necessary that before carrying out the intended work they were free from defects.

For example, if the pipes are plastic, it is necessary that other elements related to water supply be from the same material.

So, from the streams of hot water, the heating elements will be deformed in the same way.

If, during the inspection, you or the hands of specialists found any shortcomings, then the best solution to this problem would be to replace the damaged parts.

Water supply is not something worth saving on.

The most common ways to mask pipes

Today, there are a large number of ways to hide the numerous pipes in the toilet.

However, it is best to opt for the method that is most popular.

The most famous ways are:

hiding pipes behind plastic boxes;
use of blinds;
decoration of pipes with decorative panels.

You can also install a convenient utility box, behind which you can hide the pipes. It can also store the necessary accessories.

Approximately, just like the installed utility box, you can use a box made of decorative materials.

In fact, you have the opportunity to create an incredibly beautiful interior of a bathroom or toilet with your own hands.

But do not forget that you should not get too carried away with design.

Safety should come first - in unforeseen situations, you should have quick access to pipes and other plumbing elements.

Before closing the pipes in the toilet with blinds or panels, you need to consider that for safety, all plumbing parts must be made of identical materials.

It does not matter whether you choose blinds, mask the pipes with drywall or do-it-yourself decorative panels. The most important thing is that you have quick access to the pipes.

Thanks to the installed door, you will not need to deal with the demolition of the wall on which the money was spent and which you built on your own.

What to choose - a box made of plastic or drywall?

Even if you do not have enough knowledge regarding pipe masking, you can easily make a special masking box with your own hands.

Most often, such a procedure is carried out using metal sheets, and as a result, the structure is brought into proper shape using plastic or plasterboard.

By the way, if you are masking pipes with your own hands, then you can easily choose wooden bars instead of metal.

If you prefer the method of plasterboard sheathing, then it is best to glue the plasterboard construction with tiles upon completion of the process.

Despite the rather common way of using blinds, the manufacture and subsequent work with plastic decorative panels is considered the most simple and convenient.

So, how to hide the pipes in the toilet with plastic panels?

First you need to get wooden bars or a profile made of metal.

Do not forget to make markup that will help you in future work. After that, you will need to fix the profile or wooden bars.

After you have done everything that is described above, you can proceed to install the most important thing - the frame.

In the end, it is necessary to sheathe the entire structure with decorative plastic panels that will look best in the interior of a bathroom or toilet.

By the way, it should be said that the installation of blinds does not require so much effort, and if you need to complete the work in a short time, it is best to use blinds.

Some professionals use different methods when carrying out plumbing work.

It is rare to find two specialists whose methods of work will coincide identically. You can do exactly the same.

It is you who chooses the method of masking water pipes and other elements of the bathroom and toilet that suits and likes you perfectly.

But, as mentioned above, you should not pay too much attention to the design and aesthetics of the disguise itself. Still, it is better to pay more attention to security.

From the article, you learned how you can mask the water pipes in the toilet with blinds, drywall or do-it-yourself decorative panels.

It is difficult to disagree with the fact that communications in the bathroom are not the most pleasant sight. No matter how expensive pipes with valves are, they can only decorate a specific loft-type interior. If you are not an industrial design enthusiast, then there is a strong desire to hide these networks, right?

We propose to consider several options for how to close the pipes in the toilet, leaving access for regular and emergency maintenance. The article describes in detail the technical nuances and ways to implement interesting ideas. The text is complemented by useful visual applications and video tutorials.

The issue of masking pipes concerns both budget housing and luxury apartments. The difference lies in the ways of terminating communications, which are largely determined.

If in a 15-meter combined bathroom it is possible to sew up all the walls with false panels, then every centimeter is important on a 2 m² patch. Often, after repair, the interior of the toilet often takes on unthinkable forms.

In a typical housing, everything is simple: in the corner of the room there is a common sewer riser, pipes of centralized water supply are installed parallel to it. They are connected to intra-apartment communications from pipes of smaller diameter. Thus, both the vertical riser and the horizontally laid branches need to be masked.

The simplest layout of sewer pipes and plumbing in the toilet. The best option for hiding communications is the construction of two boxes (along the riser and behind the toilet), occupying a minimum of usable space

Difficulties arise when, instead of a pair of branches, you have to hide water meters that require regular access, filters, collectors, etc.

Simple boxes are indispensable here, you have to attach partitions to the load-bearing walls or build structures that resemble screens.

The collector, meters and filters are located above the toilet and occupy almost the entire wall opposite the entrance to the toilet. The best way to close the wiring and appliances is to build a plumbing cabinet with wide doors or use blinds.

In a private house, everything is easier if you take care of masking communications even before the project is implemented. Part of the pipes can be hidden in the walls, and technical hatches can be created for important nodes. Filters are installed in a specially designated room - along with a pump and other equipment responsible for the water supply of the house.

In high-rise buildings, no one will allow chasing walls under pipes, and the characteristics of the walls are not suitable for, albeit partial, but destruction. It remains the exterior decor, with the options of which we will get to know better.

Ways to mask communications

The choice of method depends on several factors: the size and direction of pipelines, their location relative to each other, the presence of additional devices, etc.

How to hide sewer and water pipes in the toilet is also influenced by interior design features. For example, blinds do not go well with classics, but they are suitable for minimalism. The choice is up to the homeowners, and a description of how to mask the pipes is below.

#1: Plastic panel box

Despite some difficulties in building structures on a frame, even beginners boldly take on. Their decision is quite understandable: saving the family budget and the availability of photo and video installation instructions.

What is the difference between drywall and plastic boxes? The difference is fundamental: in the first case, you create the basis for further decoration, in the second, you immediately get the finished product. Therefore, it is easier, cheaper and faster to create boxes from plastic panels.

However, this is only possible if the walls in the toilet are also lined with plastic of the same type or, in extreme cases, painted in the color of the panels.

One of the best options for using plastic is nothing more. All walls are fully lined with white plastic panels, while instead of boxes covering pipes, a false wall with a hatch for utility services has been erected

Instructions for installing a plastic box:

Checking the performance of communications. It is necessary in order to provide for the repair of pipes, which is usually accompanied by a dismantling of structures. The main task is to check the connections, nodes, operability of devices.
Wall and ceiling treatment. Produced with an antiseptic solution to prevent the appearance and fungus. An enclosed space with a high level of humidity and insufficient ventilation is a risk zone.
Creation of a crate. It is carried out on all walls or in communication zones. If you need a box to mask the riser - the construction of the frame. For this, both wooden slats (bars) and a metal profile designed for drywall are suitable.
Installation of plastic panels. The set of parts is fast, the main thing is to fix each in its place. Small nails are used for fastening. Small gaps at the joints and in the corners can be covered with special decorative strips or liners.

For decor, it is better to purchase a finished model. It is advisable to install a larger model so that it is more convenient to service the devices.

If the installation of a toilet paper holder is planned, at the stage of building the frame, it is necessary to attach a mortgage to the right place - a wooden block.

#2: Drywall Construction on Frame

The first stage is preparatory. Materials must be purchased in advance, and you should also choose a tool for work.

For cutting a metal profile, you will need scissors for metal, for cutting wooden parts - a hacksaw or a jigsaw. You also need a puncher and a screwdriver to fix the parts on the wall with dowels and screws. Wood processing is carried out with a brush.

Mandatory elements for the construction of the structure:

Image gallery

On a relatively modest area of the toilet, there are always many sewer interchanges. Any technical components do not look aesthetically pleasing and give the impression of an unfinished repair. Therefore, the question often arises of how to hide the pipes in the toilet and give the interior an attractive look.

Where to begin?

Before hiding the pipes in the toilet, you need to carefully inspect the riser and other communications for damage, repair them if necessary. It is necessary to start preparing drawings and calculating the material for the future design after all technical issues have been resolved. For an accurate calculation of raw materials, it is necessary to carefully make all measurements of the area on which the work will be carried out.

Hardware stores offer a wide range of finishes, but whatever you have to work with, you will need the following tools:

screwdrivers;
drill;
screwdriver;
building level and tape measure;

a saw for plastic or a knife for cutting drywall;
scissors to cut a metal profile;
self-tapping screws and fasteners for the profile.

Material selection

If you need to hide communications quickly, PVC panels will be the best choice. This is a cheap and versatile finishing option. The main thing is to choose a color and pattern that will harmoniously fit into the overall picture of the interior.

Plastic panels have several advantages:

safe for health and the environment;
installation of panels is not difficult;
installation is possible in the shortest possible time;
acceptable price;
the ability to install a hatch for access to meters or places where a leak may appear;
the possibility of creating a structure consisting of separate parts;
no additional finishing required.

And also quickly and inexpensively, you can close the riser with drywall. The toilet does not have as high humidity as the bathroom, but it is better to use a moisture-resistant type of material.

Drywall has all the advantages of panels. Unlike them, this material requires additional finishing. But such a disadvantage can be regarded as a virtue: drywall without finishing can be used for tiles or any other decorative finish. Thus, the wall behind which the pipes are located will be indistinguishable from other walls in the toilet.

Design options

The design that will hide communications is selected depending on several factors:

the size and nature of the direction of the pipes;
the location of the pipes relative to each other;
the presence of auxiliary devices and cranes;
general environment in the room.

After analyzing these features, it will not be difficult to determine the type of future design. The most common are several popular types.

box

It is a simple design that even a beginner can handle. The frame is created from a metal profile or wooden slats. Next, the base is sheathed with the material that was chosen. Full or partial sheathing is possible, depending on the availability of metering devices or taps near the riser. In this case, you must leave the window so that you can access them.

The frame of the box can be sheathed with PVC panels, moisture-resistant plywood or drywall. Drywall is usually decorated with the same materials as the main walls. There are ready-made options for the box. But this option may be more expensive. Making the box yourself, it is possible to immediately take into account all the nuances. While the finished box will have to be customized to the desired parameters.

The design of the box is represented by several configurations.

false wall. A good solution to hide several pipes located nearby at once. It looks aesthetically pleasing, but takes up a lot of space.
Square. It can be placed both vertically and horizontally, hiding the fan pipe. Suitable for rooms in which pipes are located in the corner.
Oblique false wall. The middle option between the previous ones. The design is attached at an acute angle to the side or rear wall. Just like a false wall, it allows you to hide several pipes, but saves a lot of space.
Multilevel. It is installed in the case of a chaotic arrangement of pipes in the toilet. To save space, boxes are created in places where communications are located.

Built-in sanitary cabinet

The design with doors on the wall behind the toilet is called a sanitary cabinet.

Using this method of masking, several problems are solved at once.

An additional niche for shelves appears, on which cleaning products and accessories can be stored.
The presence of doors does not impede access to meters, filters, manifolds and pipelines.
In the event of a pipe break, the cabinet will not impede access to the accident site. Replacing metering devices in a toilet with a sanitary cabinet will not be inconvenient.

The choice of material for the manufacture of doors is quite large. Plywood, PVC panels, chipboard, metal, wooden or glass doors are especially popular. You need to choose a material that fits into the overall style of the interior. For example, in a toilet decorated with plastic, plastic doors would be appropriate. And for a country wooden house, wooden doors are suitable.

Do not forget about the convenience of the location of the doors in the locker. They must be located at a suitable height so as not to obstruct access to the desired junctions. Handles on the doors should also be suitable.

The installation of swing doors in a sanitary cabinet takes place, like any other doors, they are fixed on hinges to the base. Ordinary doors are suitable for a spacious toilet. Closer rooms are best equipped with compact accordion doors, sliding models or curtains.

Concealed installation - chasing

Chasing is an alternative to decorative types of pipe masking. With hidden wiring, it is supposed to sew parts in specially punched ditches, which are called strobes. Such technological holes are made using a wall chaser or puncher. Pipes hidden in the floor screed also belong to the hidden laying. In this case, the wiring is poured with a concrete solution.

The main advantage of this type of disguise is aesthetics. Communications are completely hidden in the wall. With the exception of the riser, the diameter of which is too large and cannot be embedded in the wall. The advantages include the complete safety of pipes, their damage during hidden installation is impossible. Significant space savings is also a plus.

The weak side of the method is the laboriousness, cost and inaccessibility of pipes. You can sew up the pipes yourself, but you will have to study a lot of literature in order to get it right. The use of hidden installation is not possible everywhere. The method will be good in private houses built of brick or solid blocks, as well as in multi-storey buildings with walls of increased thickness. In other places, this method will run counter to SNIPs. Gates significantly weaken the load-bearing walls, which are already heavily loaded.

Some requirements can significantly complicate the installation:

only one-piece pipes can be sewn up, others need free access;
in the wall on which the work will be carried out, electrical wires should not pass;
it is necessary to take into account the linear expansion of the pipe material;
you have to use clamps in order to have good sound insulation.

We hide beautifully

It is not always convenient to close pipes with auxiliary materials. In some cases, there is not enough space for complex structures, or the time for repairs in the toilet may be limited. Sometimes pipes are easy enough to decorate when we close communications with a partition, access to them is difficult, and this can be inconvenient.

Outdoor placement of communications

Pipes can be left in plain sight and not decorated, if they look beautiful on their own. For example, metal communications in combination with sanitary ware from the same material are perfectly combined and fit into the interior of a loft, techno or high-tech style restroom. In a toilet with such an environment, they will become a source of pride. But such pipes are expensive, in addition, there is a chance of getting burned.

Therefore, you can beautifully beat ordinary communications:

cover with paint that matches the overall color scheme of the toilet;
decorate with unusual patterns, while you can use special stencils;
sheathe with beautiful pebbles, braid, glass;
disguise with artificial plants or make the pipes themselves in the form of trees: the toilet will resemble an impenetrable jungle or dense forest;
glue the pipes with various stickers or stickers;
if you show imagination, you can use a material that is usually recycled, for example, metal caps from carbonated drinks, and in addition to the unusual design of pipes, it would be appropriate to make a small panel of the same material.

Decorating pipes is a convenient way to hide communications. All parts of communications are in plain sight, you can always check their condition and, if necessary, repair or replace.

Blinds

Disguise thus resembles a false wall. But not a wall is created, but a curtain. It can be rolled up if necessary.

Blinds Benefits:

closing pipes in this way saves a lot of time;
during installation, a lot of garbage is not created;
long service life of blinds;
the price is small;
the niche formed behind the blinds is convenient to use for storage;

the design is compact both in open and closed form, it will not interfere, however, open blinds provide full access to counters and taps;
the choice of material is very large: from inexpensive and versatile plastic to expensive and specific wood and metal, but due to high humidity, fabric options are not recommended for use in the toilet;
the assortment is replete with a variety of colors and patterns, it will not be difficult to choose the right ones;
in case of damage or loss of appearance, there is no need to replace the entire structure, it will be enough to replace the damaged lamellas;
they can replace the screen under the bathtub or become a partition covering the washing machine if it is located in a niche.

Hidden pipes in the toilet - a necessity or a tribute to the construction fashion?

An unambiguous answer cannot be given. On the one hand, the absence of open pipelines is a more aesthetic appearance of the room, increased sound insulation and, finally, a higher degree of hygiene. On the other hand, difficult access for taking readings from water meters or carrying out repairs.

Modern technologies help to formulate such an answer: "Hidden pipes are a necessary tribute to the building fashion."

There is a very common opinion that it does not make sense to “mask” the pipelines in the toilet until the pipes are completely replaced with plastic or metal-plastic. However, this is not quite true. Firstly, hidden pipelines will significantly improve the visual perception of the room.

Secondly, they will greatly facilitate the process of cleaning the toilet, especially capital. And thirdly, the use of components such as plastic, the role of shutters or blinds will allow you to quickly dismantle the shelter structure or simply provide unhindered access to the pipes.

Existing plumbing and sewer products made of plastic theoretically allow them to be buried forever in the thickness of the walls. But this option is suitable for linear sections of water-bearing communications.

Access to water metering units, shut-off valves and revisions is required. And preferably comfortable. The ergonomics of such access is equally dependent on both plumbers and installers hiding pipes.

The designs of systems for concealing pipelines in the toilet can be divided into four subgroups:

Frame. These include structures assembled on a metal frame, or wooden slats and timber. Further cladding is made with GKL, PVC panels or DSP boards.
Mounted. They are made-to-measure roller shutters or horizontal blinds fixed to the ceiling.
Combined. In this case, part of the protection is assembled on a frame, and part is a lifting system in the form of roller shutters or blinds.
Finished construction. This is usually a one-piece array, mounted as an assembly. A typical example is a metal-plastic frame with a window for access to the water meter assembly. Filling - sandwich panel.

Frame types of pipe shelters differ in the form of assembly and types of finishing.

Forms of installation of frame systems for "masking" pipelines

Solid barrier. It is a wall, assembled along the far or side walls of the toilet room. A distinctive feature of such a false panel from a conventional partition is the presence of a frame sheathing only from the visible part. An undoubted advantage of this design will be the possibility of the same type of finishing of the entire toilet - plastic panels, ceramic tiles, washable wallpaper, fiberboard panels, etc. The disadvantages are the impossibility of carrying out plumbing work behind a false wall and a rather significant decrease in the total area of \u200b\u200bthe toilet. Basically, the footage is compressed due to the unsuccessful location of pipelines, mainly sewer risers. As a result, you have to change the location of the toilet bowl - push it to the front door or move it to the side.
Corner partition. The principle of the device of an oblique false wall is the same as that of a solid partition. Only it does not close the wall, but the place where the walls of the room meet. Behind the corner structure it is convenient to place pipelines located in the corner. Ideal when the back of the frame touches the pipes farthest from the walls of the toilet room. However, if the sewer riser and plumbing are mounted at some distance from the corner of the toilet, then an oblique false wall can take up an unreasonably large area. In addition, uneven inner corners can significantly complicate the interior decoration of the toilet room. This can be especially true when lining walls with PVC panels.
Rectangular box. They are used to "mask" both vertical risers and horizontal sections of pipelines. The frame is mounted close to the existing pipes. Unlike false walls that completely cover a wall or corner, boxes cover only segments of the wall space. The horizontal sections sewn in this way can be used as shelves. Some difficulties can be caused by sewing hot water risers with heated towel rails. This is due to the features of the possible replacement of the heating device.
Multilevel boxes. This is a kind of symbiosis of walls, false panels and boxes. The boxes perform the function of "protection" of pipelines. They are mounted close to the pipes, and at the same time, as far as possible from the plane of the walls. The design in rectangular reflection repeats the relief of the indentation of pipelines from walls or false panels. Such stepped boxes save usable area as much as possible. An interesting option is to create multi-level structures with niches. The back side of the recess is the existing walls, the protruding plane is the outer part of the boxes. But such systems are relevant for toilet rooms of rather large dimensions. Frame facing material - plastic or drywall.

Hinged systems for concealing pipelines

Blinds. This "disguise" is more of a decorative character. But it will absolutely not interfere with the repair work. The installation location is often limited to the rear wall of the toilet room. With a lateral arrangement of pipes relative to the entrance, the installation of blinds simply does not make sense. Cross plates made of aluminum are preferable to plastic lamellas. Standard powder-coated colors allow you to visually connect the blinds with the materials of the toilet room wall decoration without transitions that cut your eyes.
Roller shutters. Roleta quite organically fit into the interior of the toilet room. Are made only under the order. There are no standard sizes. Separate roller shutters usually close the rear wall of the toilet. When mounting on the side, you can not do without boxes assembled from drywall. In this case, the issue of the device of the revision hatch is eliminated. If the size of the installed shutters corresponds to the dimensions of the linear projection of the pipelines, then no problems are expected during plumbing work.

Sound insulation of pipelines behind the boxes

This event is relevant only for multi-apartment high-rise buildings. The noise of the "waterfall", coming from behind decorative boxes and false panels in the toilet, rarely brings joyful feelings. Especially such discomfort is created by sewer risers.

Mineral wool will help solve this problem. Moreover, it is necessary to isolate not the plane of the partition, but the pipelines. Noise from pipes wrapped with glass wool becomes an order of magnitude lower.

Installation of duct frames and false walls

Metal carcass. It is made at the installation site from metal profile pipes by welding. The main frame is attached to the walls, floor and ceiling with anchors. The thickness of the metal is not more than 1.5 mm, which will make it possible to fasten the skin with ordinary self-tapping screws with a drill. Cladding material - DSP boards. Such a powerful design is designed to hang and hold heavy pieces of furniture or equipment on it. Typical examples are a cabinet for storing preservation for the winter or an electric water heater with a capacity of 100 liters or more. The complexity of the installation work and the cost of materials make such a frame a rather expensive structure.
Frame made of CD and UD profiles for drywall systems. The very name of the materials for the manufacture of the structure says that it is intended for gypsum boards. But, in addition to drywall sheets for sheathing, PVC panels can be used. For drywall, the usual installation scheme is used - a grid with a mesh size of 600 by 600 mm. But plastic will require horizontal fastening of CD-slats every 500 mm. GKL is fastened with self-tapping screws for metal, plastic - with a press washer. The biggest plus of this design is the speed and accuracy of installation.
Frame made of wooden beams and slats. The most economical version of the frame "camouflage". PVC panels, drywall, fiberboard, and OSB boards can serve as cladding material. But the cheapest is almost always not the best. A structure assembled from wood in rooms with high humidity is very susceptible to the risk of deformation. Therefore, further tiling cannot be carried out. And the rest of the materials on curved racks will lose all attractiveness.

Materials for sheathing systems for covering pipelines

Building components for frame cladding are divided into two categories:

Materials suitable for use immediately after installation work. These include:
- PVC panels. Lightweight and beautiful material that has proven itself when decorating rooms with high humidity. Seamless versions of plastic panels give the impression of solidity of the assembled planes. Plastic is very easy to work with. An extensive range of colors and a variety of textures of products can satisfy the most picky tastes. The disadvantage is excessive fragility.
- Chipboard boards. Such a furniture component gives a certain comfort to the toilet room. Especially if the finish of the box is made in the same style as the front door. In addition, laminated chipboards can be mounted as part of a wall cabinet with opening or sliding doors. It is quite appropriate to use mirrors. The downside is the high cost of the project.
- Wooden lining. Wood is always in fashion. But it is very difficult to harmoniously combine wooden parts with tiles or plastic. But to completely sheathe the toilet room with clapboard may not allow the area of \u200b\u200bthe room.
Sheet materials are the basis of future finishing.
- CSP boards. Reliable, but very heavy material, even if you use sheets with a thickness of 8 mm. Cut to size with an angle grinder. Absolutely not afraid of water. Particular difficulties may arise when constructing an inspection hatch.
- Plasterboard sheets. For sheathing the shelter frames, it is recommended to use moisture-resistant wall plasterboard with a thickness of 12.5 mm. Drywall has proven itself in the construction market. Very easy to process. Does not lose its properties under various finishing materials - primers, putties, decorative plasters and ceramic tiles. The main drawback loses its structure under the influence of water. Well, cases of flooding of bathrooms in multi-storey buildings are well known.

Finishing boxes

There are several options for finishing the finishing touches in the process of covering the pipes in the toilet. Here are the most common ones:

Ceramic tile. An old and yet modern way of finishing fragments of toilet rooms. A solid "experience of operation" of tiles is the best argument in favor of ceramics. The advantages are visible to the naked eye - ergonomics, durability, aesthetics, etc. etc. In the case of boxes, there is only one technical difficulty - the device of an inspection hatch, which looked organic and would be functionally convenient.
Textured plaster. The embossed surface of such a decorative coating may require more frequent and thorough maintenance of the raised panels. But there is a big plus - the plasterer is devoid of linear dimensions and quite easily hides minor installation errors.

Use as a screen to "mask" the remnants of cabinet furniture. Any used chipboard (wardrobe wall, countertop) will perform the same role as custom-made ones.
Temporary false walls can be fastened to ordinary mounting foam. The false panels do not bear special loads, therefore, the main thing is to fix them during the foam solidification.
The role of the inspection door can be successfully performed by a removable ventilation grille.