The catalog of interior doors of the Krasnoderevshchik factory presents a collection of classic and modern solutions for interior design, including the novelties of 2018.

You can download the catalog in electronic form (.pdf).

Warranty passport on the door

The passport for the door block contains information about the rules for operating the doors of the Krasnoderevshchik factory.

You can download the passport in electronic form (.pdf).

Catalog of doors model line 700

A booklet about the new collection of interior doors 2017 from the Krasnoderevshchik factory invites you to familiarize yourself with the 700 model line. Description of the advantages and features of the 700 model line, photos of new door models, types of finishes and other useful information.

Catalog of doors Cabinetmaker 2017

The catalog of interior doors 2017 invites you to familiarize yourself with the list of products manufactured by the Krasnoderevshchik company. General information about the factory, a description of the benefits, a range of interior doors in 2016, ready-made solutions and a lot of useful information.

You can download the catalog in electronic form (.pdf).

Catalog of doors Cabinetmaker 2016

Doors catalog 2016 offers to get acquainted with the list of products manufactured by the Cabinetmaker. General information about the factory, a description of the benefits, a range of interior doors in 2016, ready-made solutions and a lot of useful information.

You can download the catalog in electronic form (.pdf).

Catalog of doors Cabinetmaker 2015

Door catalog for 2015.

You can download the catalog in electronic form (.pdf).

Catalog of special doors

Special doors - fire-prevention, sound-proof, anti-vandal, moisture-resistant, chemical-resistant doors and others.

You can download the catalog of special doors in electronic form (.pdf).

You can download the price list in electronic form (.pdf).

The price list contains prices for the products of the Cabinetmaker for all model lines, including prices for door moldings.

You can download the price list in electronic form (.pdf).

The 2013 catalog contains a new collection of interior doors from our factory, ready-made solutions for design and construction organizations, as well as a special offer for DIY retail chains.

Your attention is provided with detailed information on each model line, the unique advantages of our products.

You can download the catalog in electronic form (.pdf, 11.5 MB).

Interior catalog

The catalog contains brief information about the factory, photos of all door models produced, and a brief description of their advantages. In addition, the catalog gives some manufacturer's recommendations for the installation of doors.

You can order a catalog (free of charge), specifying in the letter information about yourself, your postal details.

The catalog is sent by mail, or received directly at the CJSC FSSI "Krasnoderevshchik" at the address: Russian Federation, Chelyabinsk, st. Mechanical, 40. Order a catalog

You can also download the catalog in electronic form (.pdf, 2.8 MB).

Directory

You can get acquainted with the products of the factory, including the latest innovations, in the new "Buyer's Guide", which provides information in the form of illustrations and a brief description of the characteristics of door models. Ask for the guide at all outlets where our products are presented.

These technical specifications apply to interior wooden door blocks (hereinafter referred to as doors), manufactured by LLC"XXX", Cheboksary.

doors designed for residential and public buildings.

These technical conditions apply to doors of the following types (according to GOST 6629):

- DG - doors are deaf;

- DO - glazed doors.

An example of recording products in other documents and (or) when ordering:

"Wooden interior door DG TU 5361-001-ХХХХХ-2012"

The list of reference and normative documentation of these technical specifications is presented in Appendix A.

1. TECHNICAL REQUIREMENTS

1. General requirements

Doors must comply with the requirements of GOST 475, the requirements of these technical specifications and be manufactured according to the working drawings of the manufacturer.

1. Main parameters and characteristics
2. The appearance and color of the doors must correspond to the standard samples approved by the head of the manufacturer.
3. The nominal dimensions of the doors must comply with the standards given in table 1.

Table 1

Block designation	Door size (height x width), mm	Door block size (height x width), mm
20-65	1900x550	1971x620
20-7	1900x600	1971х670
21-7	2000 x 600	2071 x 670
21-8	2000 x 700	2071 x 770
21-9	2000 x 800	2071 x 880
21-10	2000 x 900	2071 x 970

1. Limit deviations from the nominal dimensions along curvature should not exceed± 4 mm.
2. Doors, their assembly units and parts must have the correct geometric shape.

The deviation of door panels from flatness should not exceed

2 mm height, width and diagonal.

The deviation from the perpendicularity of the sides of the door leafs should not exceed 2 mm per 1 m.

In the corner stud joints of the boxes, the height of the sags should not exceed 0.5 mm, and in the corner junctions of the strapping of the sheets - 0.3 m. The gaps in the shoulders of the stud joints of the boxes should not be more than 1 mm.

Sag on the ends of the spiked joints in the webs is not allowed, and in the boxes there should not be more than the maximum deviations from the nominal length of the parts.

1. The frame should be made of spliced ​​pine beams, on which MDF sheets 6 mm thick are glued on both sides.
2. Doors must be lined with PVC films of thickness

(0.3 - 0.4) mm.

1. The moisture content of the wood of door parts should be 8± 1%.
2. Connections of door parts must be made in accordance with the requirements of GOST 9330.
3. The door frame, lined with MDF on both sides, is pressed in a hot double-sided press for 20 minutes.

After processing and applying the appropriate patterns, the canvas is covered with a PVC film and aged in a vacuum membrane press.

The assembly of the door leaf can also be carried out in a dry way on dowels fastened at four corners with tie screws.

1. Adhesive is used for door claddingHomakol 133 according to TU 2252-007-59759080-04.
2. The roughness of the front surfaces of the doors for an opaque finishing coating should not be more than 200 microns, for a transparent finishing coating - no more than 60 microns (in accordance with the requirements of GOST 7016).

Fringes and burrs in instrument sockets must be cleaned off.

1. On the front surfaces of doors with decorative lining with sheet or film materials, the dimensions and number of scratches, dents, stains, as well as uneven gloss and dullness must correspond III class according to GOST 24404. Mechanical damage to the door surface (scratches, dents, abrasions) is unacceptable. Extraneous inclusions under the facing material are unacceptable. Irregularities are unacceptable.
2. Types, sizes, finishes and workmanship of appliances and fasteners used for doors must meet the requirements of the standards for these products and parts and indicateper customer specification.
3. Devices, flashings, layouts and other details must be fixed with screws, pins and nails in accordance with the requirements of the standards for devices and this standard.

The screws must be screwed in. Driving of screws and exit of the ends of fasteners on the door surface is not allowed.

1. Glazing should be made using silicone and special inserts.

Glass used for glazing doors must comply with GOST 111, GOST 5533 and GOST 7481.

1. Glass surfaces must be clean, dirt, oil stains, glass chipping, chips, glass edge protrusions, damage to glass corners are not allowed.
2. Requirements for materials and purchased products
3. Materials and products purchased for the manufacture of doors must comply with the requirements of GOST 475 and current regulatory documents.
4. Materials purchased for the manufacture of doors, including foreign-made materials, must have a certificate of conformity or other document confirming the quality.

Polymeric and synthetic materials used for the manufacture of doors must have a sanitary and epidemiological conclusion and fire safety certificates.

1. The basis of the door leaf is a frame made of spliced ​​pine beams (humidity 8± 1%), on which MDF sheets are glued on both sides by hot pressing using industrial glue (Homakol 133 according to TU 2252-007-59759080-04) 6mm thick.
2. The door leaf is covered with PVC film (GOST 24944) 0.3-0.4 mm thick. The ends of the canvas are also covered with PVC film on all four sides. Glazed doors are equipped with glass (GOST 111 / GOST 5533 / GOST 7481) thickness 4 mm (8 mm), inserted through the upper groove of the door leaf.
3. Completeness
4. Doors are supplied to consumers in their original packaging, separately door leafs and separately frames, trim. By agreement with the consumer, the doors and the door butt can be equipped with related fittings.
5. Doors of complete factory readiness must have a final finish that does not require additional work, installed glass and sealing gaskets.
6. The delivery set should include: a quality document (label on the package) and door operation instructions, including recommendations for installation.

1. Marking
2. Each product is marked with a waterproof marker or thesea label indicating the name of the manufacturer, the nameproduct, date of manufacture and (or) order number, sign(stamp) confirming the acceptance of the product by technical control lem.

The marking must be clear and easy to read. The method of marking should ensure its safety during transportation and storage.

1. The door devices included in the product must be marked in accordance with the regulatory or technical documentation for this product.
2. It is allowed to give marking in the accompanying document for the supplied batch of doors, and only its designation should be indicated on each door.
3. The accompanying document for the supplied batch of doors must indicate:

- name and (or) trademark of the manufacturer;

- name and (or) symbol of the door;

- batch number and date of manufacture;

- Number of doors;

door size;

- designation of these technical conditions.

1. Transport marking - according to GOST 14192.

Transport marking of glazed doors should include the handling sign “Fragile. Carefully".

It is allowed to apply other handling signs and information inscriptions that ensure the safety of doors during loading and unloading operations, transportation and storage.

1. Package
2. Doors must be packed in accordance with the manufacturer's drawings. Packaging should ensure the safety of products during long-term transportation and repeated shifting of warehouse storage with the observance of safety precautions.
3. The finished fabric is packed in corrugated cardboard (GOST R 52901) from all 4 end sides.
4. Door leafs before their transportation must be securely fastened with straps, ties or other devices that do not cause damage to products.
5. Packed doors can be stacked in a horizontal position or installed in a vertical position on wooden pallets in accordance with GOST 9557, GOST 9570, GOST 22831, GOST 26381 and fastened in accordance with GOST 21650. The height of the door foot is not more than 1000 mm. The design of the pallet provides for installation in two tiers.
6. By agreement with the customer, it is allowedthe use of packaging materials of other types, as well as the supply of doors in unpacked form.

6. MANUFACTURER WARRANTY

1. The manufacturer guarantees that the doors comply with the requirements of these technical specifications, subject to the conditions of transportation and storage established by these technical specifications, as well as the installation instructions.
2. Warranty period - 1 year from the date of completion of installation work.

1. General information

1.1. Real products - wooden window and door balcony blocks of a single design with double-glazed windows, are a modern design certified in the GOST R Certification System for use in standard or individual construction.

1.2. The results of certification tests of wooden window and door balcony blocks with double-glazed windows, manufactured by 33 Du6a LLC.

1.2.1. The coefficient of reduced resistance to heat transfer (): for products with double-glazed windows 40 mm (4-16-4-12-4) - 0.706, which corresponds to the class "B1". Scope - residential and public buildings and structures.

1.2.2. Noise absorption for products with double-glazed windows - 26 dB.

1.2.3. The air permeability of products with a double-circuit seal corresponds to class "A".

1.2.4. Reliability of window devices and hinges - 20,000 cycles without destruction, damage and change in shape.

1.3. Locking fittings from AUBI (Germany), installed on these products, can provide four types of opening: rotary, tilt, tilt-and-turn and depressurizing (night ventilation), which prevents the windows from “fogging”.

1.4. The design of the products provides highly effective sealing of the premises (no drafts through leaky joints), as a result of which it is necessary to regularly ventilate them for hygienic reasons, as well as to remove excess moisture, which manifests itself in the form of “fogging” of glasses, to prevent the formation of white corrosion on the fittings under exposure to high humidity.

High humidity leads to swelling of the wood and the subsequent appearance of surface defects. Lack of ventilation (ventilation) leads to an increase in the likelihood of wood damage by fungi.

2. Completeness

The order package includes:

2.1. Finished products with installed double-glazed windows, sealing gaskets and locking devices.

2.2. Handles with fixing screws.

2.4. Other additional elements (additional profile, window sill boards, ebbs, etc.) specified by the terms of the order.

2.5. Real passport.

3. Rules of operation and maintenance

you purchased window system that needs maintenance. To maintain the reliability of your windows for many years, you should follow these guidelines:

Opening (closing) of the valves should be carried out smoothly, without jerks;
- for rotary (normal) opening of the sash, it is necessary to turn the handle from the “closed” (down) position by 90 degrees to the horizontal position;
- for the hinged opening of the sash as a transom, it is necessary to turn the handle from the “closed” (down) position by 180 degrees to the up position;
- for depressurization ("night" ventilation), it is necessary to turn the handle from the "open" position by 45 degrees upwards.

Attention!

Only turn the handle when the sash is fully closed! When the sash is open (rotated or tilted), the handle is fixed from turning.

If, when the sash is open, it simultaneously tilts (by pressing the leaf spring while turning the handle upwards), it is necessary to set the sash to the normal position as follows:

Press on the leaf spring located on the side of the sash at the level of the handle;
- set the handle to the up position;
- close the sash like a transom and turn the handle, without releasing the spring, by 90 degrees to a horizontal position;
- release the leaf spring, close the sash completely and turn the handle to the “closed” (down) position.

If it is necessary to press the sashes tighter (“night” ventilation), turn the locking rollers with a hexagonal (S = 4 mm) key so that the mark on the locking rollers faces the seal.

Attention!

Installation of the product should be carried out after finishing work (pouring floors and plastering walls) associated with changes in humidity in the room.

Manufactured windows and doors are painted with special environmentally friendly, deeply penetrating primers and paints. Soil components protect the wood surface from various pests and rot. Thick-layer paints and glazes applied by spraying protect the surface from external influences and moisture penetration for a long time, at the same time making it vapor-permeable, which allows maintaining equilibrium moisture in the wood. Such weather-resistant coatings require special care.

Complete stabilization of the paintwork occurs two to three weeks after painting, so during this time, with direct exposure to moisture, the appearance of wood texture, the appearance of white spots on the surface of the window, is possible. With a decrease in humidity, the spots disappear, and subsequently do not appear. This is due to the high hygroscopicity of natural wood.

A distinctive feature when painting with water-based paint systems is a slight uplift of the wood structure with the penetration of water into the product.

In addition, when priming window products made of timber glued on micro-studs transparent soils, a slight color variation on the surface of the products may occur due to the different density of the wood bars that make up the product.

However, these factors do not affect the operational properties of the paintwork.

Attention!

Depending on the environmental influences, preventive measures are required to be carried out at intervals of one to five years.

It is necessary to lubricate the moving parts of the fittings with non-absorbent technical vaseline at least once a year.
- Check the seals for damage (if the seals are damaged, they must be replaced).
- Regularly (once every six months) to clean the paint surface from dirt, you should use ordinary cleaners - solutions of washing powders. After that, treat the surface with GlasuritQuick&EasyHolzbalzam.
- If it is necessary to update the surface coating wooden windows is carried out with the help of paints and varnishes of the Glasurit company (Germany).
- Periodically check the cleanliness of the drainage holes located on the outside of the lower part of the product.
- Glass unit surface wipe with glass cleaner.

Attention!

Data window systems they close very tightly and thus save a lot of heat. To prevent this advantage from becoming a disadvantage in the form of condensation, you should ensure that the room is regularly ventilated throughout the day.

4. Warranty

10.10.2016

The passport

Door block metal

1. General information about the product.

1.1 Products consist of four main elements: a door frame, a door leaf, a lock and loops for hanging the leaf on the box.

1.2 The door leaf is a welded structure made of one (two) steel sheets, stiffeners and anti-removable pins.

1.3 The door frame is made of steel profiles of complex shape, welded together. Mounting ears or holes for fastening through the door frame are provided for subsequent mounting on the box.

1.4 The door leaf and the door frame are connected to each other by welded or threaded canopy hinges attached to them, which provide free opening of the door.

2. Main technical data and characteristics.

2.1 Produced doors can be made (depending on the order) with external, right or left opening.

2.2 The reliability of a metal door must be at least 100,000 opening cycles.

Overall dimensions of a metal door on a frame can vary in width from 860 to 980 mm, in height from 1800 to 2050 mm. Standards of overall dimensions established at the enterprise: in width 860 mm, 870 mm, 880 mm, 960 mm, 970 mm, 980 mm; height 1800mm, 1900mm, 1950mm, 2050mm.

2.3 The appearance and finish of the door corresponds to the samples.

2.4 Linear dimensions and limit deviations comply with the technical requirements of GOST 31173-2003.

3. Delivery set

	Name
	Door leaf with frame
	Door handle (with square)
	Cylinder mechanism with a set of keys
	Set of keys for lever lock
	Plug set (in holes for anchor bolts, 6 pcs.)
	peephole
	Passport and instruction manual

4. Safety requirements.

4.1 Products must be safe in operation and maintenance and withstand the operating loads in accordance with current building codes. The material used in the manufacture of door blocks meets existing safety requirements.

4.2 To work on the installation and maintenance of doors, technical personnel with the necessary professional training is allowed.

5.Transportation and storage.

5.1 Transportation of doors in a package is allowed in any type of land, air and water transport in accordance with the rules of transportation for this type of transport. Transportation, as well as loading and unloading must ensure the complete safety of the product.

5.2 Products must be stored in a vertical or horizontal (number of doors in a stack should not exceed 10 pieces) position on liners of the same thickness in closed ventilated rooms at a temperature of -40 0 From to +40 0 C and relative air humidity 50 +_ 15%

Devices and accessories not installed on the product must be packed in a container.

6.Maintenance and operation.

6.1 Maintenance of the door includes preventive inspections and control of its performance. The frequency of door maintenance should be at least once every three months.

6.2 During preventive examinations, the following operations are performed:

The completeness of the door and the integrity of the main components (door leaf), rubber seals are visually controlled;

The necessary repair and restoration work, cleaning and lubrication of mating surfaces (if necessary) are being carried out. It is recommended to lubricate the hinge assembly with a thin layer of grease every 6 months.

7. Order of installation and preparation for operation.

7.1 Doors are delivered assembled.

7.2 Installation of door blocks should be carried out by specialized firms, specially trained teams.

7.3 CHECKING THE DOOR BEFORE INSTALLATION:

Upon receipt of the door, check the integrity of the packaging.

Check the appearance of the product for mechanical damage and the compliance of the product with your order (model, size of the door unit, color of the coating, type and color of the panel, opening side)

Check the completeness of the fittings and their appearance

Check the functionality of the locks

ATTENTION! Only after all stages of verification have been carried out, it is allowed to dismantle the old door!

7.4 The door is mounted in the openings of brick, concrete, reinforced concrete walls with a thickness of 125 mm or more, as well as in the openings of walls and partitions made of other structural materials, the design of the openings in which allows the installation of doors. For high-quality installation, we recommend using masking tape (to protect the surfaces of the walls and the door frame from foam). Additionally, we recommend the use of PSUL (pre-compressed self-expanding sealing tape) for installation in the gap between the metal casing and the wall.

7.5 Mechanical damage to the door covering or decorative trim and overhead elements during the installation of the door leaf is not the cause of a claim against the manufacturer.

8. Warranty obligations.

8.1 Warranty period of operation is 1 year from the date of shipment to the customer.

8.2 The warranty period for locks and fittings is 1 year from the date of shipment to the customer.

8.3 The service life of the product is 1 year.

8.4 Warranty repairs are not subject to:

- Products with mechanical damage due to inappropriate conditions of transportation, storage, installation and operation;

Products with signs of self-repair, including self-disassembly of locking devices;

Products with signs of violations of operating conditions;

Products installed in violation of the installation instructions;

9.Certificate of acceptance.

9.1 The metal door block complies with the requirements of GOST 31173-2003 and is recognized as fit for use.

9.2 The manufacturer reserves the right to make changes to the door design in order to improve performance without being reflected in this instruction manual and prior notice.