By joining this Agreement and leaving your data on the Site site_name (hereinafter referred to as the Site), by filling in the fields of the feedback forms, the User:
- confirms that all the data indicated by him belong to him personally,
- confirms and acknowledges that he carefully read the Agreement and the conditions for processing his personal data indicated by him in the fields of the feedback forms, the text of the agreement and the conditions for processing personal data are clear to him;
- agrees to the processing by the Site of the personal data provided as part of the information in order to conclude this Agreement between it and the Site, as well as its subsequent execution;
- agrees to the terms of personal data processing without reservations and restrictions.
The user gives his consent to the processing of his personal data, namely the performance of actions provided for in paragraph 3 of part 1 of Art. 3 of the Federal Law of July 27, 2006 N 152-FZ "On Personal Data", and confirms that, by giving such consent, he acts freely, of his own will and in his own interest. The User's consent to the processing of personal data is specific, informed and conscious.
This consent of the User is recognized as executed in a simple written form, for the processing of the following personal data: last name, first name, patronymic; the year of birth; place of stay (city, region); phone numbers; e-mail addresses (E-mail).
The user grants the site_name the right to perform the following actions (operations) with personal data: collection and accumulation; storage within the periods of storage of reports established by regulatory documents, but not less than three years, from the date of termination of the use of services by the User; clarification (update, change); usage; destruction; depersonalization; transfer at the request of the court, including to third parties, in compliance with measures that ensure the protection of personal data from unauthorized access.
This consent is valid indefinitely from the moment the data is provided and can be revoked by you by submitting an application to the site administration indicating the data specified in Art. 14 of the Law "On Personal Data". Withdrawal of consent to the processing of personal data can be carried out by sending the User an appropriate order in a simple written form to the contact e-mail address indicated on the site site_name.
The Site is not responsible for the use (both legal and illegal) by third parties of the Information posted by the User on the Site, including its reproduction and distribution, carried out by all possible means. The site has the right to make changes to this Agreement. When making changes in the current version, the date of the last update is indicated. The new version of the Agreement comes into force from the moment of its placement, unless otherwise provided by the new version of the Agreement. A link to the current version is always located on the pages of the site: site_name.ru
The law of the Russian Federation shall apply to this Agreement and the relationship between the user and the Site arising in connection with the application of the Agreement.”
20.05.2014
Screws with a decorative cap.
The color of the hat can be gold or silver, if necessary, decorative hats can be tinted or aged. It may be necessary to do this for antique plates so that the mount and the main background look harmonious with the plate.
remote holders. Mounting plates at a distance from the wall, using remote holders. Depending on the type of holder, the distance from the wall is from 10-100 mm. This mount is indispensable when attaching to uneven surfaces.
Hidden fasteners with metal plugs. Plugs are cut from the front of the plate itself. You can paint them in any color. Used for plates with a welded chamfer, as well as for products made using the powder paint method.
Hidden fastening with studs. This is when the reverse side, on the front of the plate, does not have holes, decorative caps, metal plugs. Secret fasteners are used in the manufacture of plates with a welded chamfer. On the back of the plate, 4 studs are welded. The ends of the studs are marked with a bold marker, then applied to the place to be mounted, the marker marked the places for drilling the hole. Then the plate is inserted into them, for greater reliability from vandals, liquid nails or glue are poured into the holes.
Our company can produce individual fastening not only for self-cutting screws, but also for screws.
Double sided tapes. The most convenient and fastest way to use double-sided tape. There are different double-sided adhesive tapes, some of which can only be used indoors, and others that can withstand outdoor weather. When using double-sided adhesive tape, you do not need to drill holes either on the plate itself or on the wall, it is very convenient to mount the plates on the door, you do not need to damage the doors themselves and the interior of the office as a whole. It is also convenient to attach signs to fired partitions and doors.
Hook. For free / busy signs use a hook.
Door handle plates, which are used in hotels and are fixed on the room handles.
Hidden loops can be used if the plate is framed in a metal Nelson profile. The hinges can be fastened with an eye inward or outward. See photo
For fastening, the plate is simply hung on a nail in the wall. The plate can be easily removed and put back in place. To attach the plate in the Nelson frame, securely place the hinges outward, use a level to align it on the wall and fasten it through the hinges to the self-cutting screws. Without special tools, the plate will be difficult to remove. The plates are very mobile, but are not protected from theft of the plate itself.
How to determine the best way to attach volumetric or flat letters? What type of fastener can be used? Which fasteners to use outdoors, and which indoors?
For all types of letters, there are two main ways of attaching letters:
- without offset from the mounting surface - close
- with a distance from the mounting surface - at a certain distance
The mounting surface in this case is the place of installation of letters (signs) - a wall, a substrate, a partition, a structure.
It should be borne in mind that in almost any case, the surface, with the exception of glass, will be damaged by fasteners (self-tapping screws, studs, adhesive tape) and after dismantling the letters, it will need to be restored.
Any work on the installation of signs must be carried out in a clean room, without dust in the air, such as during repair work. Such a situation is fraught with at least pollution of the sign and, at the most, poor-quality installation of the sign, especially on double-sided tape.
Several factors influence the choice of fastener type:
- The size of the elements of the sign
- Location of the sign
- Surface type
- Design project requirements
Installation of letters (signs) close to the surface
The installation of letters (signboard elements) directly on the surface, as a rule, is carried out in two ways: using double-sided tape and using self-tapping screws.
It is more expedient to use double-sided adhesive tape indoors (indoor advertising), in outdoor conditions it is better to refuse this option, since environmental conditions are much more aggressive than indoor conditions, if we are not talking about rooms with extreme conditions of stay.
Although in ordinary office premises, you need to pay attention to the possible presence of "aggressive" conditions. So, for example, temperature drops - location in a draft from the street; heating - location at the heating device; cooling - location in close proximity to the air conditioner.
From the above list of conditions, an interesting conclusion can be drawn: it is desirable to use double-sided tape in conditions and temperatures that are comfortable for a person.)))
The installation of letters (signs) on self-tapping screws practically does not impose requirements on external and internal conditions. When installing letters on self-tapping screws, the quality of the surface and the design of the letter (signboard elements) are more important, allowing you to install a self-tapping screw.
There are not so many cases where the use of self-tapping screws is not possible, for example, a surface made of glass or expensive stone, and for such surfaces we have a wide variety of types of double-sided tape.
Installation of letters (signs) with a relative distance from the surface
Letters (signboard elements) are installed with a relative distance from the surface in cases where backlighting is installed in the letters or it is necessary to give the signboard an additional effect of volume due to the appearance of a natural shadow.
Sometimes, this method of installation is dictated by the texture of the surface, for example, decorative plaster or other irregularities.
When installing letters (signboard elements), several types of remote holders are used: plastic remote holders of the “fungus” type, threaded and plastic studs, and individually manufactured remote holders.
Plastic remote holders of the "mushroom" type.
This holder has a cap and a leg - hence the name. The leg is screwed to the surface, the cap is glued to the back of the letter, then both elements are connected in the father-mother way (inserted one into the other). This type of remote holder is applicable in large letters, since the diameter of the cap is 17mm, respectively, the element of the letter must be at least 20mm so that the holder is not very noticeable. The size (length) of the “fungus” leg allows you to perform a distance from the surface from 7 to 30 mm.
hairpins
Studs can be installed on both small flat letters and large volumetric letters.
Threaded studs are more often installed on flat stainless steel letters and volumetric letters with backlighting.
On flat stainless steel letters, a nut is required, into which the stud is screwed. As a rule, studs of at least M3 are used, that is, with a diameter of 3 mm, but the size of the nut faces is from 7 mm, so the element of the letter must be at least 8-9 mm.
The installation of threaded studs on three-dimensional letters with backlighting is advisable when the letters are small.
The threaded stud can be open or closed - hidden in a sleeve (hollow cylinder), from the back surface of the letter to the installation surface. The sleeve can be aluminum or plastic, glued or painted in the desired color, for example, in the color of the wall.
Plastic studs can be installed on flat plastic letters and on double-layer letters with a plastic bottom layer. It is desirable that the thickness of flat plastic letters and the bottom layer in two-layer letters be at least 6mm. The diameter of the plastic holder is 4mm, so the width of the letter element must be at least 8mm.
All types of remote holders installed on letters (signage elements) are inserted into pre-prepared holes in the wall (installation surface). The holes are marked according to a specially made template and exactly coincide with the place of installation of the remote holders installed on the letters, which guarantees the accuracy of the installation of each element of the sign.
To order three-dimensional or flat letters and signs with a request, preferably with a layout of letters in vector format, a photo of the intended location of the sign with three-dimensional or flat letters to form a binding (photomontage) of the future sign. We will give a detailed quotation in response to your request.
One of the easiest mounting methods that even a non-professional can implement. Does not require professional tools and skills. There are restrictions on the weight of the attached product, so this method is most often used indoors and for plates made of plastic or acrylic. It is recommended to use specialized tape.
Most often used for plates with a removable information part. A metal base is required to which the replacement part of the plate will be attached.
3. Screws (self-tapping screws)
One of the simplest fixing methods that does not require special skills, it is used in a situation where it is more important to fix the sign securely, rather than aesthetically.
Used only when framing the plate with a Nielsen metal baguette. The loops are placed with the eye in or out. If you put the eye inward, then the loop will be hidden and the plate is hung on the screws screwed into the wall, otherwise the plate is attached in such a way that it will not be possible to remove it without a special tool.
One of the most aesthetic and reliable ways to attach plates. The plate moves away from the wall by 10-60 mm, depending on the type of holder. It feels like the sign is floating in the air. Holders are selected according to the style, color and material of the plate.
5. Screws with decorative caps
This mounting method is similar to the previous one. The difference lies in the fact that the product is attached close to the bearing surface. Decorative caps, unlike conventional screws, look much more impressive.
6. Ceiling hangers
Structurally, the suspension system consists of 3 parts: a holder that is attached to a plate, a metal cable or fishing line, and a holder that is attached to the ceiling.
7. Illuminated mount
Combined with one of the above mounting methods, provides visibility of information even at night.
Sign mounting systems - metal, plastic remote holders for fastening facade signs, office, information signs, signs, signboards made of acrylic, glass, wood, metal to concrete, brick, wood, plasterboard walls ... as well as for hanging signs under the ceiling. .. Reliable, practical, beautiful!
On the picture: Demonstration plate with end illumination. See more edge-lit signs - acrylights
Sign mounting systems are decorative fasteners, which in a simple case represent a bolt with a beautiful decorative cap and an extension tube, with the help of which your sign or sign is securely and beautifully fixed on the concrete facade of the building, on the plasterboard wall inside the business center, on the door to the office ... In addition to metal distance holders, mounting systems can be cabled - for hanging signs from the ceiling.
Remote decorative holders
The base cylinder - an extension tube - is attached to the wall with screws and dowels. A plate is put on the cylinder and fixed with a decorative bolt, which can be "under silver", "under gold", black, and other colors, sizes and shapes.
Remote holder for glass plate
Table nameplate holders
Label fixing systems
|
Left: Rope system for attaching signs. A metal cable is stretched between two decorative fasteners, which are attached to the wall, or to the ceiling and floor. In this way, several plates of the same type in design can be fixed in a row vertically. The solution is relevant for business centers, office centers, government and public organizations. On right: Tubular system for attaching signs. The plates are fastened in a row vertically on metal rods (tubes), which are fastened away from the wall using remote holders |
Mounting options
End holders
Mounting Plate Samples
Fastening plates in the lobby of the office center using cable system
Suction pads
metal holders
Metal fasteners - remote holders. When attaching a plate made of transparent plexiglass to the wall (door), adhesive tape is visible, so remote mounts for such plates are the most practical and presentable mounting method.
Coffee sign. transparent acrylic,
Loading...