What is a do-it-yourself veranda to a house: projects and photos

The veranda attached to the house is usually built from the materials that make up the house. You can use others, but they must match the style of the main structure. The foundation is best done on pillars. The body of the structure under construction should be located close to the house. No precipitation should get inside. For this, the roof is best made single-pitched. To provide light in the room, you need to provide a lot of windows (photo No. 1). Quite often, terraces and verandas attached to the house are made with glass walls, which, if the owners wish, move apart. For glazing are used:

  • glazed wooden frames;
  • PVC windows;
  • sheets of monolithic or.

The room used in winter is equipped with heat-insulating double-glazed windows, polycarbonate sheets. You can heat it with a fireplace (photo No. 2) or heaters of any type. In summer, curtains are hung on the windows or blinds are installed to protect from the sun's rays. When using polycarbonate, its advantages should be considered:

  • high strength;
  • good retention of ultraviolet rays;
  • low level of thermal conductivity;
  • high degree of plasticity of the material;
  • environmental friendliness;
  • rich color range.

The veranda attached to the house begins with the construction of a frame on a finished foundation. It consists of wooden beams, metal profiles, building bricks, blocks and other materials left over from the construction of the main house. Before closing the structure with polycarbonate, you need to remember a few rules for installing this transparent material:

  • wooden, plastic or metal crate is performed in increments of 60-80 cm;
  • cellular polycarbonate is installed with honeycombs in a vertical position;
  • to connect sheets, you need to use connecting profiles;
  • the upper cut of the sheet is closed with a special profile;
  • the lower cut is closed with a profile with several holes;
  • polycarbonate sheets are fastened with thermal washers;
  • the protective film is removed from the surface of the sheets after the installation of polycarbonate;
  • sheet is cut with a jigsaw.

The porch is made of brick or wood, concrete or natural stone, metal or forged products. Its coating should be non-slippery, always clean. The size of the porch and its shape are varied. Any of its options are suitable for the veranda and terrace to the house: photo number 3.

Veranda interior with plastic windows

When designing the interior, you need to take into account its location. If it is located on the north or east side of the house, then the design is best made from wicker furniture. Furniture made of mahogany, bamboo is allowed. Pillows with covers are well suited for sofas and armchairs. It is possible to design with the use of linen or cotton fabrics with the image of flora. Real palm trees and ferns or their images will give the room a finished look.

The structure erected on the south side of the building is decorated in white and blue tones. They are used in furniture and in the rest of the decoration. Indoors, you can put a lot of flowers, hang Roman curtains on the windows.

Loading...
Top